Input: WM97xx - add support for streaming mode on Mainstone
Mark Brown [Wed, 2 Apr 2008 04:51:46 +0000 (00:51 -0400)]
Signed-off-by: Liam Girdwood <liam.girdwood@wolfsonmicro.com>
Signed-off-by: Graeme Gregory <gg@opensource.wolfsonmicro.com>
Signed-off-by: Mike Arthur <mike.arthur@wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

drivers/input/touchscreen/Kconfig
drivers/input/touchscreen/Makefile
drivers/input/touchscreen/mainstone-wm97xx.c [new file with mode: 0644]

index f6e8dad..565ec71 100644 (file)
@@ -226,6 +226,18 @@ config TOUCHSCREEN_WM9713
 
          If unsure, say N.
 
+config TOUCHSCREEN_WM97XX_MAINSTONE
+       tristate "WM97xx Mainstone accelerated touch"
+       depends on TOUCHSCREEN_WM97XX && ARCH_PXA
+       help
+         Say Y here for support for streaming mode with WM97xx touchscreens
+         on Mainstone systems.
+
+         If unsure, say N.
+
+         To compile this driver as a module, choose M here: the
+         module will be called mainstone-wm97xx.
+
 config TOUCHSCREEN_USB_COMPOSITE
        tristate "USB Touchscreen Driver"
        depends on USB_ARCH_HAS_HCD
index f1bc829..3c096d7 100644 (file)
@@ -25,3 +25,4 @@ obj-$(CONFIG_TOUCHSCREEN_WM97XX)      += wm97xx-ts.o
 wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9705) += wm9705.o
 wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9712) += wm9712.o
 wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9713) += wm9713.o
+obj-$(CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE)     += mainstone-wm97xx.o
diff --git a/drivers/input/touchscreen/mainstone-wm97xx.c b/drivers/input/touchscreen/mainstone-wm97xx.c
new file mode 100644 (file)
index 0000000..a79f029
--- /dev/null
@@ -0,0 +1,302 @@
+/*
+ * mainstone-wm97xx.c  --  Mainstone Continuous Touch screen driver for
+ *                         Wolfson WM97xx AC97 Codecs.
+ *
+ * Copyright 2004, 2007 Wolfson Microelectronics PLC.
+ * Author: Liam Girdwood
+ *         liam.girdwood@wolfsonmicro.com or linux@wolfsonmicro.com
+ * Parts Copyright : Ian Molton <spyro@f2s.com>
+ *                   Andrew Zabolotny <zap@homelink.ru>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ * Notes:
+ *     This is a wm97xx extended touch driver to capture touch
+ *     data in a continuous manner on the Intel XScale archictecture
+ *
+ *  Features:
+ *       - codecs supported:- WM9705, WM9712, WM9713
+ *       - processors supported:- Intel XScale PXA25x, PXA26x, PXA27x
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/wm97xx.h>
+#include <linux/io.h>
+#include <asm/arch/pxa-regs.h>
+
+#define VERSION                "0.13"
+
+struct continuous {
+       u16 id;    /* codec id */
+       u8 code;   /* continuous code */
+       u8 reads;  /* number of coord reads per read cycle */
+       u32 speed; /* number of coords per second */
+};
+
+#define WM_READS(sp) ((sp / HZ) + 1)
+
+static const struct continuous cinfo[] = {
+       {WM9705_ID2, 0, WM_READS(94), 94},
+       {WM9705_ID2, 1, WM_READS(188), 188},
+       {WM9705_ID2, 2, WM_READS(375), 375},
+       {WM9705_ID2, 3, WM_READS(750), 750},
+       {WM9712_ID2, 0, WM_READS(94), 94},
+       {WM9712_ID2, 1, WM_READS(188), 188},
+       {WM9712_ID2, 2, WM_READS(375), 375},
+       {WM9712_ID2, 3, WM_READS(750), 750},
+       {WM9713_ID2, 0, WM_READS(94), 94},
+       {WM9713_ID2, 1, WM_READS(120), 120},
+       {WM9713_ID2, 2, WM_READS(154), 154},
+       {WM9713_ID2, 3, WM_READS(188), 188},
+};
+
+/* continuous speed index */
+static int sp_idx;
+static u16 last, tries;
+
+/*
+ * Pen sampling frequency (Hz) in continuous mode.
+ */
+static int cont_rate = 200;
+module_param(cont_rate, int, 0);
+MODULE_PARM_DESC(cont_rate, "Sampling rate in continuous mode (Hz)");
+
+/*
+ * Pen down detection.
+ *
+ * This driver can either poll or use an interrupt to indicate a pen down
+ * event. If the irq request fails then it will fall back to polling mode.
+ */
+static int pen_int;
+module_param(pen_int, int, 0);
+MODULE_PARM_DESC(pen_int, "Pen down detection (1 = interrupt, 0 = polling)");
+
+/*
+ * Pressure readback.
+ *
+ * Set to 1 to read back pen down pressure
+ */
+static int pressure;
+module_param(pressure, int, 0);
+MODULE_PARM_DESC(pressure, "Pressure readback (1 = pressure, 0 = no pressure)");
+
+/*
+ * AC97 touch data slot.
+ *
+ * Touch screen readback data ac97 slot
+ */
+static int ac97_touch_slot = 5;
+module_param(ac97_touch_slot, int, 0);
+MODULE_PARM_DESC(ac97_touch_slot, "Touch screen data slot AC97 number");
+
+
+/* flush AC97 slot 5 FIFO on pxa machines */
+#ifdef CONFIG_PXA27x
+static void wm97xx_acc_pen_up(struct wm97xx *wm)
+{
+       schedule_timeout_uninterruptible(1);
+
+       while (MISR & (1 << 2))
+               MODR;
+}
+#else
+static void wm97xx_acc_pen_up(struct wm97xx *wm)
+{
+       int count = 16;
+       schedule_timeout_uninterruptible(1);
+
+       while (count < 16) {
+               MODR;
+               count--;
+       }
+}
+#endif
+
+static int wm97xx_acc_pen_down(struct wm97xx *wm)
+{
+       u16 x, y, p = 0x100 | WM97XX_ADCSEL_PRES;
+       int reads = 0;
+
+       /* When the AC97 queue has been drained we need to allow time
+        * to buffer up samples otherwise we end up spinning polling
+        * for samples.  The controller can't have a suitably low
+        * threashold set to use the notifications it gives.
+        */
+       schedule_timeout_uninterruptible(1);
+
+       if (tries > 5) {
+               tries = 0;
+               return RC_PENUP;
+       }
+
+       x = MODR;
+       if (x == last) {
+               tries++;
+               return RC_AGAIN;
+       }
+       last = x;
+       do {
+               if (reads)
+                       x = MODR;
+               y = MODR;
+               if (pressure)
+                       p = MODR;
+
+               /* are samples valid */
+               if ((x & WM97XX_ADCSRC_MASK) != WM97XX_ADCSEL_X ||
+                   (y & WM97XX_ADCSRC_MASK) != WM97XX_ADCSEL_Y ||
+                   (p & WM97XX_ADCSRC_MASK) != WM97XX_ADCSEL_PRES)
+                       goto up;
+
+               /* coordinate is good */
+               tries = 0;
+               input_report_abs(wm->input_dev, ABS_X, x & 0xfff);
+               input_report_abs(wm->input_dev, ABS_Y, y & 0xfff);
+               input_report_abs(wm->input_dev, ABS_PRESSURE, p & 0xfff);
+               input_sync(wm->input_dev);
+               reads++;
+       } while (reads < cinfo[sp_idx].reads);
+up:
+       return RC_PENDOWN | RC_AGAIN;
+}
+
+static int wm97xx_acc_startup(struct wm97xx *wm)
+{
+       int idx = 0;
+
+       /* check we have a codec */
+       if (wm->ac97 == NULL)
+               return -ENODEV;
+
+       /* Go you big red fire engine */
+       for (idx = 0; idx < ARRAY_SIZE(cinfo); idx++) {
+               if (wm->id != cinfo[idx].id)
+                       continue;
+               sp_idx = idx;
+               if (cont_rate <= cinfo[idx].speed)
+                       break;
+       }
+       wm->acc_rate = cinfo[sp_idx].code;
+       wm->acc_slot = ac97_touch_slot;
+       dev_info(wm->dev,
+                "mainstone accelerated touchscreen driver, %d samples/sec\n",
+                cinfo[sp_idx].speed);
+
+       /* codec specific irq config */
+       if (pen_int) {
+               switch (wm->id) {
+               case WM9705_ID2:
+                       wm->pen_irq = IRQ_GPIO(4);
+                       set_irq_type(IRQ_GPIO(4), IRQT_BOTHEDGE);
+                       break;
+               case WM9712_ID2:
+               case WM9713_ID2:
+                       /* enable pen down interrupt */
+                       /* use PEN_DOWN GPIO 13 to assert IRQ on GPIO line 2 */
+                       wm->pen_irq = MAINSTONE_AC97_IRQ;
+                       wm97xx_config_gpio(wm, WM97XX_GPIO_13, WM97XX_GPIO_IN,
+                                          WM97XX_GPIO_POL_HIGH,
+                                          WM97XX_GPIO_STICKY,
+                                          WM97XX_GPIO_WAKE);
+                       wm97xx_config_gpio(wm, WM97XX_GPIO_2, WM97XX_GPIO_OUT,
+                                          WM97XX_GPIO_POL_HIGH,
+                                          WM97XX_GPIO_NOTSTICKY,
+                                          WM97XX_GPIO_NOWAKE);
+                       break;
+               default:
+                       dev_err(wm->dev,
+                               "pen down irq not supported on this device\n");
+                       pen_int = 0;
+                       break;
+               }
+       }
+
+       return 0;
+}
+
+static void wm97xx_acc_shutdown(struct wm97xx *wm)
+{
+       /* codec specific deconfig */
+       if (pen_int) {
+               switch (wm->id & 0xffff) {
+               case WM9705_ID2:
+                       wm->pen_irq = 0;
+                       break;
+               case WM9712_ID2:
+               case WM9713_ID2:
+                       /* disable interrupt */
+                       wm->pen_irq = 0;
+                       break;
+               }
+       }
+}
+
+static void wm97xx_irq_enable(struct wm97xx *wm, int enable)
+{
+       if (enable)
+               enable_irq(wm->pen_irq);
+       else
+               disable_irq(wm->pen_irq);
+}
+
+static struct wm97xx_mach_ops mainstone_mach_ops = {
+       .acc_enabled = 1,
+       .acc_pen_up = wm97xx_acc_pen_up,
+       .acc_pen_down = wm97xx_acc_pen_down,
+       .acc_startup = wm97xx_acc_startup,
+       .acc_shutdown = wm97xx_acc_shutdown,
+       .irq_enable = wm97xx_irq_enable,
+       .irq_gpio = WM97XX_GPIO_2,
+};
+
+static int mainstone_wm97xx_probe(struct platform_device *pdev)
+{
+       struct wm97xx *wm = platform_get_drvdata(pdev);
+
+       return wm97xx_register_mach_ops(wm, &mainstone_mach_ops);
+}
+
+static int mainstone_wm97xx_remove(struct platform_device *pdev)
+{
+       struct wm97xx *wm = platform_get_drvdata(pdev);
+
+       wm97xx_unregister_mach_ops(wm);
+       return 0;
+}
+
+static struct platform_driver mainstone_wm97xx_driver = {
+       .probe = mainstone_wm97xx_probe,
+       .remove = mainstone_wm97xx_remove,
+       .driver = {
+               .name = "wm97xx-touch",
+       },
+};
+
+static int __init mainstone_wm97xx_init(void)
+{
+       return platform_driver_register(&mainstone_wm97xx_driver);
+}
+
+static void __exit mainstone_wm97xx_exit(void)
+{
+       platform_driver_unregister(&mainstone_wm97xx_driver);
+}
+
+module_init(mainstone_wm97xx_init);
+module_exit(mainstone_wm97xx_exit);
+
+/* Module information */
+MODULE_AUTHOR("Liam Girdwood <liam.girdwood@wolfsonmicro.com>");
+MODULE_DESCRIPTION("wm97xx continuous touch driver for mainstone");
+MODULE_LICENSE("GPL");