X-Git-Url: http://nv-tegra.nvidia.com/gitweb/?p=linux-2.6.git;a=blobdiff_plain;f=arch%2Fcris%2Farch-v10%2Fdrivers%2FKconfig;h=58f5864a668057ff57e5c62c29a64e7d4103ab18;hp=03e2e68f947dd7c3d49424e5781ec9e1f4e3cf57;hb=79e04fdbb3423f6faa0d93e5ec41c2c2741d4052;hpb=2195dadf853bb32262bd2e5a64f517ae45698c55 diff --git a/arch/cris/arch-v10/drivers/Kconfig b/arch/cris/arch-v10/drivers/Kconfig index 03e2e68..58f5864 100644 --- a/arch/cris/arch-v10/drivers/Kconfig +++ b/arch/cris/arch-v10/drivers/Kconfig @@ -1,42 +1,14 @@ +if ETRAX_ARCH_V10 + config ETRAX_ETHERNET bool "Ethernet support" depends on ETRAX_ARCH_V10 select NET_ETHERNET + select MII help This option enables the ETRAX 100LX built-in 10/100Mbit Ethernet controller. -choice - prompt "Network LED behavior" - depends on ETRAX_ETHERNET - default ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY - -config ETRAX_NETWORK_LED_ON_WHEN_LINK - bool "LED_on_when_link" - help - Selecting LED_on_when_link will light the LED when there is a - connection and will flash off when there is activity. - - Selecting LED_on_when_activity will light the LED only when - there is activity. - - This setting will also affect the behaviour of other activity LEDs - e.g. Bluetooth. - -config ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY - bool "LED_on_when_activity" - help - Selecting LED_on_when_link will light the LED when there is a - connection and will flash off when there is activity. - - Selecting LED_on_when_activity will light the LED only when - there is activity. - - This setting will also affect the behaviour of other activity LEDs - e.g. Bluetooth. - -endchoice - config ETRAX_SERIAL bool "Serial-port support" depends on ETRAX_ARCH_V10 @@ -81,32 +53,6 @@ config ETRAX_SERIAL_PORT0 the same DMA channels. choice - prompt "Ser0 DMA out assignment" - depends on ETRAX_SERIAL_PORT0 - default ETRAX_SERIAL_PORT0_DMA6_OUT - -config ETRAX_SERIAL_PORT0_NO_DMA_OUT - bool "No DMA out" - -config ETRAX_SERIAL_PORT0_DMA6_OUT - bool "DMA 6" - -endchoice - -choice - prompt "Ser0 DMA in assignment" - depends on ETRAX_SERIAL_PORT0 - default ETRAX_SERIAL_PORT0_DMA7_IN - -config ETRAX_SERIAL_PORT0_NO_DMA_IN - bool "No DMA in" - -config ETRAX_SERIAL_PORT0_DMA7_IN - bool "DMA 7" - -endchoice - -choice prompt "Ser0 DTR, RI, DSR and CD assignment" depends on ETRAX_SERIAL_PORT0 default ETRAX_SER0_DTR_RI_DSR_CD_ON_NONE @@ -195,32 +141,6 @@ config ETRAX_SERIAL_PORT1 Enables the ETRAX 100 serial driver for ser1 (ttyS1). choice - prompt "Ser1 DMA out assignment" - depends on ETRAX_SERIAL_PORT1 - default ETRAX_SERIAL_PORT1_DMA8_OUT - -config ETRAX_SERIAL_PORT1_NO_DMA_OUT - bool "No DMA out" - -config ETRAX_SERIAL_PORT1_DMA8_OUT - bool "DMA 8" - -endchoice - -choice - prompt "Ser1 DMA in assignment" - depends on ETRAX_SERIAL_PORT1 - default ETRAX_SERIAL_PORT1_DMA9_IN - -config ETRAX_SERIAL_PORT1_NO_DMA_IN - bool "No DMA in" - -config ETRAX_SERIAL_PORT1_DMA9_IN - bool "DMA 9" - -endchoice - -choice prompt "Ser1 DTR, RI, DSR and CD assignment" depends on ETRAX_SERIAL_PORT1 default ETRAX_SER1_DTR_RI_DSR_CD_ON_NONE @@ -312,32 +232,6 @@ config ETRAX_SERIAL_PORT2 Enables the ETRAX 100 serial driver for ser2 (ttyS2). choice - prompt "Ser2 DMA out assignment" - depends on ETRAX_SERIAL_PORT2 - default ETRAX_SERIAL_PORT2_DMA2_OUT - -config ETRAX_SERIAL_PORT2_NO_DMA_OUT - bool "No DMA out" - -config ETRAX_SERIAL_PORT2_DMA2_OUT - bool "DMA 2" - -endchoice - -choice - prompt "Ser2 DMA in assignment" - depends on ETRAX_SERIAL_PORT2 - default ETRAX_SERIAL_PORT2_DMA3_IN - -config ETRAX_SERIAL_PORT2_NO_DMA_IN - bool "No DMA in" - -config ETRAX_SERIAL_PORT2_DMA3_IN - bool "DMA 3" - -endchoice - -choice prompt "Ser2 DTR, RI, DSR and CD assignment" depends on ETRAX_SERIAL_PORT2 default ETRAX_SER2_DTR_RI_DSR_CD_ON_NONE @@ -426,32 +320,6 @@ config ETRAX_SERIAL_PORT3 Enables the ETRAX 100 serial driver for ser3 (ttyS3). choice - prompt "Ser3 DMA out assignment" - depends on ETRAX_SERIAL_PORT3 - default ETRAX_SERIAL_PORT3_DMA4_OUT - -config ETRAX_SERIAL_PORT3_NO_DMA_OUT - bool "No DMA out" - -config ETRAX_SERIAL_PORT3_DMA4_OUT - bool "DMA 4" - -endchoice - -choice - prompt "Ser3 DMA in assignment" - depends on ETRAX_SERIAL_PORT3 - default ETRAX_SERIAL_PORT3_DMA5_IN - -config ETRAX_SERIAL_PORT3_NO_DMA_IN - bool "No DMA in" - -config ETRAX_SERIAL_PORT3_DMA5_IN - bool "DMA 5" - -endchoice - -choice prompt "Ser3 DTR, RI, DSR and CD assignment" depends on ETRAX_SERIAL_PORT3 default ETRAX_SER3_DTR_RI_DSR_CD_ON_NONE @@ -541,45 +409,6 @@ config ETRAX_RS485_DISABLE_RECEIVER loopback. Not all products are able to do this in software only. Axis 2400/2401 must disable receiver. -config ETRAX_IDE - bool "ATA/IDE support" - select IDE - select BLK_DEV_IDE - select BLK_DEV_IDEDISK - select BLK_DEV_IDECD - select BLK_DEV_IDEDMA - select IDE_GENERIC - help - Enable this to get support for ATA/IDE. - You can't use parallel ports or SCSI ports - at the same time. - - -config ETRAX_IDE_DELAY - int "Delay for drives to regain consciousness" - depends on ETRAX_IDE - default 15 - help - Number of seconds to wait for IDE drives to spin up after an IDE - reset. -choice - prompt "IDE reset pin" - depends on ETRAX_IDE - default ETRAX_IDE_PB7_RESET - -config ETRAX_IDE_PB7_RESET - bool "Port_PB_Bit_7" - help - IDE reset on pin 7 on port B - -config ETRAX_IDE_G27_RESET - bool "Port_G_Bit_27" - help - IDE reset on pin 27 on port G - -endchoice - - config ETRAX_USB_HOST bool "USB host" select USB @@ -599,23 +428,6 @@ config ETRAX_USB_HOST_PORT2 depends on ETRAX_USB_HOST default n -config ETRAX_AXISFLASHMAP - bool "Axis flash-map support" - depends on ETRAX_ARCH_V10 - select MTD - select MTD_CFI - select MTD_CFI_AMDSTD - select MTD_OBSOLETE_CHIPS - select MTD_AMDSTD - select MTD_CHAR - select MTD_BLOCK - select MTD_PARTITIONS - select MTD_CONCAT - select MTD_COMPLEX_MAPPINGS - help - This option enables MTD mapping of flash devices. Needed to use - flash memories. If unsure, say Y. - config ETRAX_PTABLE_SECTOR int "Byte-offset of partition table sector" depends on ETRAX_AXISFLASHMAP @@ -769,37 +581,6 @@ config ETRAX_PB_CHANGEABLE_BITS Bit set = changeable. You probably want 00 here. -config ETRAX_RTC - bool "Real Time Clock support" - depends on ETRAX_ARCH_V10 - help - Enables drivers for the Real-Time Clock battery-backed chips on - some products. The kernel reads the time when booting, and - the date can be set using ioctl(fd, RTC_SET_TIME, &rt) with rt a - rtc_time struct (see ) on the /dev/rtc - device, major 121. You can check the time with cat /proc/rtc, but - normal time reading should be done using libc function time and - friends. - -choice - prompt "RTC chip" - depends on ETRAX_RTC - default ETRAX_DS1302 - -config ETRAX_DS1302 - bool "DS1302" - help - Enables the driver for the DS1302 Real-Time Clock battery-backed - chip on some products. - -config ETRAX_PCF8563 - bool "PCF8563" - help - Enables the driver for the PCF8563 Real-Time Clock battery-backed - chip on some products. - -endchoice - config ETRAX_DS1302_RST_ON_GENERIC_PORT bool "DS1302 RST on Generic Port" depends on ETRAX_DS1302 @@ -846,3 +627,5 @@ config ETRAX_DS1302_TRICKLE_CHARGE 1 = 2kohm, 2 = 4kohm, 3 = 4kohm 4 = 1 diode, 8 = 2 diodes Allowed values are (increasing current): 0, 11, 10, 9, 7, 6, 5 + +endif