config HAVE_FUNCTION_GRAPH_TRACER
bool
+config HAVE_FUNCTION_GRAPH_FP_TEST
+ bool
+ help
+ An arch may pass in a unique value (frame pointer) to both the
+ entering and exiting of a function. On exit, the value is compared
+ and if it does not match, then it will panic the kernel.
+
config HAVE_FUNCTION_TRACE_MCOUNT_TEST
bool
help
config HAVE_HW_BRANCH_TRACER
bool
+config HAVE_SYSCALL_TRACEPOINTS
+ bool
+
config TRACER_MAX_TRACE
bool
depends on HAVE_FTRACE_NMI_ENTER
default y
+config EVENT_TRACING
+ select CONTEXT_SWITCH_TRACER
+ bool
+
+config CONTEXT_SWITCH_TRACER
+ select MARKERS
+ bool
+
+# All tracer options should select GENERIC_TRACER. For those options that are
+# enabled by all tracers (context switch and event tracer) they select TRACING.
+# This allows those options to appear when no other tracer is selected. But the
+# options do not appear when something else selects it. We need the two options
+# GENERIC_TRACER and TRACING to avoid circular dependencies to accomplish the
+# hidding of the automatic options options.
+
config TRACING
bool
select DEBUG_FS
select STACKTRACE if STACKTRACE_SUPPORT
select TRACEPOINTS
select NOP_TRACER
+ select BINARY_PRINTF
+ select EVENT_TRACING
+
+config GENERIC_TRACER
+ bool
+ select TRACING
+
+#
+# Minimum requirements an architecture has to meet for us to
+# be able to offer generic tracing facilities:
+#
+config TRACING_SUPPORT
+ bool
+ # PPC32 has no irqflags tracing support, but it can use most of the
+ # tracers anyway, they were tested to build and work. Note that new
+ # exceptions to this list aren't welcomed, better implement the
+ # irqflags tracing for your architecture.
+ depends on TRACE_IRQFLAGS_SUPPORT || PPC32
+ depends on STACKTRACE_SUPPORT
+ default y
-menu "Tracers"
+if TRACING_SUPPORT
+
+menuconfig FTRACE
+ bool "Tracers"
+ default y if DEBUG_KERNEL
+ help
+ Enable the kernel tracing infrastructure.
+
+if FTRACE
config FUNCTION_TRACER
bool "Kernel Function Tracer"
depends on HAVE_FUNCTION_TRACER
- depends on DEBUG_KERNEL
select FRAME_POINTER
- select TRACING
+ select KALLSYMS
+ select GENERIC_TRACER
select CONTEXT_SWITCH_TRACER
help
Enable the kernel to trace every kernel function. This is done
bool "Kernel Function Graph Tracer"
depends on HAVE_FUNCTION_GRAPH_TRACER
depends on FUNCTION_TRACER
+ depends on !X86_32 || !CC_OPTIMIZE_FOR_SIZE
default y
help
Enable the kernel to trace a function at both its return
and its entry.
- It's first purpose is to trace the duration of functions and
- draw a call graph for each thread with some informations like
- the return value.
- This is done by setting the current return address on the current
- task structure into a stack of calls.
+ Its first purpose is to trace the duration of functions and
+ draw a call graph for each thread with some information like
+ the return value. This is done by setting the current return
+ address on the current task structure into a stack of calls.
+
config IRQSOFF_TRACER
bool "Interrupts-off Latency Tracer"
default n
depends on TRACE_IRQFLAGS_SUPPORT
depends on GENERIC_TIME
- depends on DEBUG_KERNEL
select TRACE_IRQFLAGS
- select TRACING
+ select GENERIC_TRACER
select TRACER_MAX_TRACE
help
This option measures the time spent in irqs-off critical
disabled by default and can be runtime (re-)started
via:
- echo 0 > /debugfs/tracing/tracing_max_latency
+ echo 0 > /sys/kernel/debug/tracing/tracing_max_latency
(Note that kernel size and overhead increases with this option
enabled. This option and the preempt-off timing option can be
default n
depends on GENERIC_TIME
depends on PREEMPT
- depends on DEBUG_KERNEL
- select TRACING
+ select GENERIC_TRACER
select TRACER_MAX_TRACE
help
This option measures the time spent in preemption off critical
disabled by default and can be runtime (re-)started
via:
- echo 0 > /debugfs/tracing/tracing_max_latency
+ echo 0 > /sys/kernel/debug/tracing/tracing_max_latency
(Note that kernel size and overhead increases with this option
enabled. This option and the irqs-off timing option can be
config SYSPROF_TRACER
bool "Sysprof Tracer"
depends on X86
- select TRACING
+ select GENERIC_TRACER
+ select CONTEXT_SWITCH_TRACER
help
This tracer provides the trace needed by the 'Sysprof' userspace
tool.
config SCHED_TRACER
bool "Scheduling Latency Tracer"
- depends on DEBUG_KERNEL
- select TRACING
+ select GENERIC_TRACER
select CONTEXT_SWITCH_TRACER
select TRACER_MAX_TRACE
help
This tracer tracks the latency of the highest priority task
to be scheduled in, starting from the point it has woken up.
-config CONTEXT_SWITCH_TRACER
- bool "Trace process context switches"
- depends on DEBUG_KERNEL
+config ENABLE_DEFAULT_TRACERS
+ bool "Trace process context switches and events"
+ depends on !GENERIC_TRACER
select TRACING
- select MARKERS
help
- This tracer gets called from the context switch and records
- all switching of tasks.
+ This tracer hooks to various trace points in the kernel
+ allowing the user to pick and choose which trace point they
+ want to trace. It also includes the sched_switch tracer plugin.
+
+config FTRACE_SYSCALLS
+ bool "Trace syscalls"
+ depends on HAVE_SYSCALL_TRACEPOINTS
+ select GENERIC_TRACER
+ select KALLSYMS
+ help
+ Basic tracer to catch the syscall entry and exit events.
config BOOT_TRACER
bool "Trace boot initcalls"
- depends on DEBUG_KERNEL
- select TRACING
+ select GENERIC_TRACER
select CONTEXT_SWITCH_TRACER
help
This tracer helps developers to optimize boot times: it records
the timings of the initcalls and traces key events and the identity
of tasks that can cause boot delays, such as context-switches.
- Its aim is to be parsed by the /scripts/bootgraph.pl tool to
+ Its aim is to be parsed by the scripts/bootgraph.pl tool to
produce pretty graphics about boot inefficiencies, giving a visual
representation of the delays during initcalls - but the raw
/debug/tracing/trace text output is readable too.
- You must pass in ftrace=initcall to the kernel command line
- to enable this on bootup.
+ You must pass in initcall_debug and ftrace=initcall to the kernel
+ command line to enable this on bootup.
config TRACE_BRANCH_PROFILING
+ bool
+ select GENERIC_TRACER
+
+choice
+ prompt "Branch Profiling"
+ default BRANCH_PROFILE_NONE
+ help
+ The branch profiling is a software profiler. It will add hooks
+ into the C conditionals to test which path a branch takes.
+
+ The likely/unlikely profiler only looks at the conditions that
+ are annotated with a likely or unlikely macro.
+
+ The "all branch" profiler will profile every if statement in the
+ kernel. This profiler will also enable the likely/unlikely
+ profiler as well.
+
+ Either of the above profilers add a bit of overhead to the system.
+ If unsure choose "No branch profiling".
+
+config BRANCH_PROFILE_NONE
+ bool "No branch profiling"
+ help
+ No branch profiling. Branch profiling adds a bit of overhead.
+ Only enable it if you want to analyse the branching behavior.
+ Otherwise keep it disabled.
+
+config PROFILE_ANNOTATED_BRANCHES
bool "Trace likely/unlikely profiler"
- depends on DEBUG_KERNEL
- select TRACING
+ select TRACE_BRANCH_PROFILING
help
This tracer profiles all the the likely and unlikely macros
in the kernel. It will display the results in:
- /debugfs/tracing/profile_annotated_branch
+ /sys/kernel/debug/tracing/profile_annotated_branch
Note: this will add a significant overhead, only turn this
on if you need to profile the system's use of these macros.
- Say N if unsure.
-
config PROFILE_ALL_BRANCHES
bool "Profile all if conditionals"
- depends on TRACE_BRANCH_PROFILING
+ select TRACE_BRANCH_PROFILING
help
This tracer profiles all branch conditions. Every if ()
taken in the kernel is recorded whether it hit or miss.
The results will be displayed in:
- /debugfs/tracing/profile_branch
+ /sys/kernel/debug/tracing/profile_branch
+
+ This option also enables the likely/unlikely profiler.
This configuration, when enabled, will impose a great overhead
on the system. This should only be enabled when the system
is to be analyzed
-
- Say N if unsure.
+endchoice
config TRACING_BRANCHES
bool
config POWER_TRACER
bool "Trace power consumption behavior"
- depends on DEBUG_KERNEL
depends on X86
- select TRACING
+ select GENERIC_TRACER
help
This tracer helps developers to analyze and optimize the kernels
power management decisions, specifically the C-state and P-state
config STACK_TRACER
bool "Trace max stack"
depends on HAVE_FUNCTION_TRACER
- depends on DEBUG_KERNEL
select FUNCTION_TRACER
select STACKTRACE
+ select KALLSYMS
help
This special tracer records the maximum stack footprint of the
- kernel and displays it in debugfs/tracing/stack_trace.
+ kernel and displays it in /sys/kernel/debug/tracing/stack_trace.
This tracer works by hooking into every function call that the
kernel executes, and keeping a maximum stack depth value and
config HW_BRANCH_TRACER
depends on HAVE_HW_BRANCH_TRACER
bool "Trace hw branches"
- select TRACING
+ select GENERIC_TRACER
help
This tracer records all branches on the system in a circular
buffer giving access to the last N branches for each cpu.
config KMEMTRACE
bool "Trace SLAB allocations"
- select TRACING
+ select GENERIC_TRACER
help
kmemtrace provides tracing for slab allocator functions, such as
kmalloc, kfree, kmem_cache_alloc, kmem_cache_free etc.. Collected
and profile kernel code.
This requires an userspace application to use. See
- Documentation/vm/kmemtrace.txt for more information.
+ Documentation/trace/kmemtrace.txt for more information.
Saying Y will make the kernel somewhat larger and slower. However,
if you disable kmemtrace at run-time or boot-time, the performance
config WORKQUEUE_TRACER
bool "Trace workqueues"
- select TRACING
+ select GENERIC_TRACER
help
The workqueue tracer provides some statistical informations
about each cpu workqueue thread such as the number of the
config BLK_DEV_IO_TRACE
bool "Support for tracing block io actions"
depends on SYSFS
+ depends on BLOCK
select RELAY
select DEBUG_FS
select TRACEPOINTS
- select TRACING
+ select GENERIC_TRACER
select STACKTRACE
help
Say Y here if you want to be able to trace the block layer actions
bool "enable/disable ftrace tracepoints dynamically"
depends on FUNCTION_TRACER
depends on HAVE_DYNAMIC_FTRACE
- depends on DEBUG_KERNEL
default y
help
This option will modify all the calls to ftrace dynamically
were made. If so, it runs stop_machine (stops all CPUS)
and modifies the code to jump over the call to ftrace.
+config FUNCTION_PROFILER
+ bool "Kernel function profiler"
+ depends on FUNCTION_TRACER
+ default n
+ help
+ This option enables the kernel function profiler. A file is created
+ in debugfs called function_profile_enabled which defaults to zero.
+ When a 1 is echoed into this file profiling begins, and when a
+ zero is entered, profiling stops. A file in the trace_stats
+ directory called functions, that show the list of functions that
+ have been hit and their counters.
+
+ If in doubt, say N
+
config FTRACE_MCOUNT_RECORD
def_bool y
depends on DYNAMIC_FTRACE
config FTRACE_STARTUP_TEST
bool "Perform a startup test on ftrace"
- depends on TRACING && DEBUG_KERNEL
+ depends on GENERIC_TRACER
select FTRACE_SELFTEST
help
This option performs a series of startup tests on ftrace. On bootup
config MMIOTRACE
bool "Memory mapped IO tracing"
- depends on HAVE_MMIOTRACE_SUPPORT && DEBUG_KERNEL && PCI
- select TRACING
+ depends on HAVE_MMIOTRACE_SUPPORT && PCI
+ select GENERIC_TRACER
help
Mmiotrace traces Memory Mapped I/O access and is meant for
debugging and reverse engineering. It is called from the ioremap
implementation and works via page faults. Tracing is disabled by
default and can be enabled at run-time.
- See Documentation/tracers/mmiotrace.txt.
+ See Documentation/trace/mmiotrace.txt.
If you are not helping to develop drivers, say N.
config MMIOTRACE_TEST
Say N, unless you absolutely know what you are doing.
-endmenu
+config RING_BUFFER_BENCHMARK
+ tristate "Ring buffer benchmark stress tester"
+ depends on RING_BUFFER
+ help
+ This option creates a test to stress the ring buffer and bench mark it.
+ It creates its own ring buffer such that it will not interfer with
+ any other users of the ring buffer (such as ftrace). It then creates
+ a producer and consumer that will run for 10 seconds and sleep for
+ 10 seconds. Each interval it will print out the number of events
+ it recorded and give a rough estimate of how long each iteration took.
+
+ It does not disable interrupts or raise its priority, so it may be
+ affected by processes that are running.
+
+ If unsure, say N
+
+endif # FTRACE
+
+endif # TRACING_SUPPORT
+