*
* Copyright (C) 2005 James Chapman (ds1337 core)
* Copyright (C) 2006 David Brownell
+ * Copyright (C) 2009 Matthias Fuchs (rx8025 support)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* to have set the chip up as a clock (turning on the oscillator and
* setting the date and time), Linux can ignore the non-clock features.
* That's a natural job for a factory or repair bench.
- *
- * This is currently a simple no-alarms driver. If your board has the
- * alarm irq wired up on a ds1337 or ds1339, and you want to use that,
- * then look at the rtc-rs5c372 driver for code to steal...
- *
- * If the I2C "force" mechanism is used, we assume the chip is a ds1337.
- * (Much better would be board-specific tables of I2C devices, along with
- * the platform_data drivers would use to sort such issues out.)
*/
enum ds_type {
- unknown = 0,
ds_1307,
ds_1337,
ds_1338,
ds_1339,
ds_1340,
m41t00,
+ rx_8025,
// rs5c372 too? different address...
};
-static unsigned short normal_i2c[] = { 0x68, I2C_CLIENT_END };
-
-I2C_CLIENT_INSMOD;
-
-
/* RTC registers don't differ much, except for the century flag */
#define DS1307_REG_SECS 0x00 /* 00-59 */
# define DS1340_BIT_nEOSC 0x80
#define DS1307_REG_MIN 0x01 /* 00-59 */
#define DS1307_REG_HOUR 0x02 /* 00-23, or 1-12{am,pm} */
+# define DS1307_BIT_12HR 0x40 /* in REG_HOUR */
+# define DS1307_BIT_PM 0x20 /* in REG_HOUR */
# define DS1340_BIT_CENTURY_EN 0x80 /* in REG_HOUR */
# define DS1340_BIT_CENTURY 0x40 /* in REG_HOUR */
#define DS1307_REG_WDAY 0x03 /* 01-07 */
# define DS1307_BIT_RS0 0x01
#define DS1337_REG_CONTROL 0x0e
# define DS1337_BIT_nEOSC 0x80
+# define DS1339_BIT_BBSQI 0x20
# define DS1337_BIT_RS2 0x10
# define DS1337_BIT_RS1 0x08
# define DS1337_BIT_INTCN 0x04
# define DS1337_BIT_OSF 0x80
# define DS1337_BIT_A2I 0x02
# define DS1337_BIT_A1I 0x01
+#define DS1339_REG_ALARM1_SECS 0x07
#define DS1339_REG_TRICKLE 0x10
+#define RX8025_REG_CTRL1 0x0e
+# define RX8025_BIT_2412 0x20
+#define RX8025_REG_CTRL2 0x0f
+# define RX8025_BIT_PON 0x10
+# define RX8025_BIT_VDET 0x40
+# define RX8025_BIT_XST 0x20
struct ds1307 {
- u8 reg_addr;
- u8 regs[8];
+ u8 regs[11];
enum ds_type type;
- struct i2c_msg msg[2];
+ unsigned long flags;
+#define HAS_NVRAM 0 /* bit 0 == sysfs file active */
+#define HAS_ALARM 1 /* bit 1 == irq claimed */
struct i2c_client *client;
- struct i2c_client dev;
struct rtc_device *rtc;
+ struct work_struct work;
+ s32 (*read_block_data)(struct i2c_client *client, u8 command,
+ u8 length, u8 *values);
+ s32 (*write_block_data)(struct i2c_client *client, u8 command,
+ u8 length, const u8 *values);
};
struct chip_desc {
- char name[9];
unsigned nvram56:1;
unsigned alarm:1;
- enum ds_type type;
};
-static const struct chip_desc chips[] = { {
- .name = "ds1307",
- .type = ds_1307,
+static const struct chip_desc chips[] = {
+[ds_1307] = {
.nvram56 = 1,
-}, {
- .name = "ds1337",
- .type = ds_1337,
+},
+[ds_1337] = {
.alarm = 1,
-}, {
- .name = "ds1338",
- .type = ds_1338,
+},
+[ds_1338] = {
.nvram56 = 1,
-}, {
- .name = "ds1339",
- .type = ds_1339,
+},
+[ds_1339] = {
.alarm = 1,
-}, {
- .name = "ds1340",
- .type = ds_1340,
-}, {
- .name = "m41t00",
- .type = m41t00,
+},
+[ds_1340] = {
+},
+[m41t00] = {
+},
+[rx_8025] = {
}, };
-static inline const struct chip_desc *find_chip(const char *s)
+static const struct i2c_device_id ds1307_id[] = {
+ { "ds1307", ds_1307 },
+ { "ds1337", ds_1337 },
+ { "ds1338", ds_1338 },
+ { "ds1339", ds_1339 },
+ { "ds1340", ds_1340 },
+ { "m41t00", m41t00 },
+ { "rx8025", rx_8025 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, ds1307_id);
+
+/*----------------------------------------------------------------------*/
+
+#define BLOCK_DATA_MAX_TRIES 10
+
+static s32 ds1307_read_block_data_once(struct i2c_client *client, u8 command,
+ u8 length, u8 *values)
+{
+ s32 i, data;
+
+ for (i = 0; i < length; i++) {
+ data = i2c_smbus_read_byte_data(client, command + i);
+ if (data < 0)
+ return data;
+ values[i] = data;
+ }
+ return i;
+}
+
+static s32 ds1307_read_block_data(struct i2c_client *client, u8 command,
+ u8 length, u8 *values)
{
- unsigned i;
+ u8 oldvalues[I2C_SMBUS_BLOCK_MAX];
+ s32 ret;
+ int tries = 0;
+
+ dev_dbg(&client->dev, "ds1307_read_block_data (length=%d)\n", length);
+ ret = ds1307_read_block_data_once(client, command, length, values);
+ if (ret < 0)
+ return ret;
+ do {
+ if (++tries > BLOCK_DATA_MAX_TRIES) {
+ dev_err(&client->dev,
+ "ds1307_read_block_data failed\n");
+ return -EIO;
+ }
+ memcpy(oldvalues, values, length);
+ ret = ds1307_read_block_data_once(client, command, length,
+ values);
+ if (ret < 0)
+ return ret;
+ } while (memcmp(oldvalues, values, length));
+ return length;
+}
+
+static s32 ds1307_write_block_data(struct i2c_client *client, u8 command,
+ u8 length, const u8 *values)
+{
+ u8 currvalues[I2C_SMBUS_BLOCK_MAX];
+ int tries = 0;
+
+ dev_dbg(&client->dev, "ds1307_write_block_data (length=%d)\n", length);
+ do {
+ s32 i, ret;
- for (i = 0; i < ARRAY_SIZE(chips); i++)
- if (strnicmp(s, chips[i].name, sizeof chips[i].name) == 0)
- return &chips[i];
- return NULL;
+ if (++tries > BLOCK_DATA_MAX_TRIES) {
+ dev_err(&client->dev,
+ "ds1307_write_block_data failed\n");
+ return -EIO;
+ }
+ for (i = 0; i < length; i++) {
+ ret = i2c_smbus_write_byte_data(client, command + i,
+ values[i]);
+ if (ret < 0)
+ return ret;
+ }
+ ret = ds1307_read_block_data_once(client, command, length,
+ currvalues);
+ if (ret < 0)
+ return ret;
+ } while (memcmp(currvalues, values, length));
+ return length;
}
+/*----------------------------------------------------------------------*/
+
+/*
+ * The IRQ logic includes a "real" handler running in IRQ context just
+ * long enough to schedule this workqueue entry. We need a task context
+ * to talk to the RTC, since I2C I/O calls require that; and disable the
+ * IRQ until we clear its status on the chip, so that this handler can
+ * work with any type of triggering (not just falling edge).
+ *
+ * The ds1337 and ds1339 both have two alarms, but we only use the first
+ * one (with a "seconds" field). For ds1337 we expect nINTA is our alarm
+ * signal; ds1339 chips have only one alarm signal.
+ */
+static void ds1307_work(struct work_struct *work)
+{
+ struct ds1307 *ds1307;
+ struct i2c_client *client;
+ struct mutex *lock;
+ int stat, control;
+
+ ds1307 = container_of(work, struct ds1307, work);
+ client = ds1307->client;
+ lock = &ds1307->rtc->ops_lock;
+
+ mutex_lock(lock);
+ stat = i2c_smbus_read_byte_data(client, DS1337_REG_STATUS);
+ if (stat < 0)
+ goto out;
+
+ if (stat & DS1337_BIT_A1I) {
+ stat &= ~DS1337_BIT_A1I;
+ i2c_smbus_write_byte_data(client, DS1337_REG_STATUS, stat);
+
+ control = i2c_smbus_read_byte_data(client, DS1337_REG_CONTROL);
+ if (control < 0)
+ goto out;
+
+ control &= ~DS1337_BIT_A1IE;
+ i2c_smbus_write_byte_data(client, DS1337_REG_CONTROL, control);
+
+ /* rtc_update_irq() assumes that it is called
+ * from IRQ-disabled context.
+ */
+ local_irq_disable();
+ rtc_update_irq(ds1307->rtc, 1, RTC_AF | RTC_IRQF);
+ local_irq_enable();
+ }
+
+out:
+ if (test_bit(HAS_ALARM, &ds1307->flags))
+ enable_irq(client->irq);
+ mutex_unlock(lock);
+}
+
+static irqreturn_t ds1307_irq(int irq, void *dev_id)
+{
+ struct i2c_client *client = dev_id;
+ struct ds1307 *ds1307 = i2c_get_clientdata(client);
+
+ disable_irq_nosync(irq);
+ schedule_work(&ds1307->work);
+ return IRQ_HANDLED;
+}
+
+/*----------------------------------------------------------------------*/
+
static int ds1307_get_time(struct device *dev, struct rtc_time *t)
{
struct ds1307 *ds1307 = dev_get_drvdata(dev);
int tmp;
/* read the RTC date and time registers all at once */
- ds1307->msg[1].flags = I2C_M_RD;
- ds1307->msg[1].len = 7;
-
- tmp = i2c_transfer(to_i2c_adapter(ds1307->client->dev.parent),
- ds1307->msg, 2);
- if (tmp != 2) {
+ tmp = ds1307->read_block_data(ds1307->client,
+ DS1307_REG_SECS, 7, ds1307->regs);
+ if (tmp != 7) {
dev_err(dev, "%s error %d\n", "read", tmp);
return -EIO;
}
ds1307->regs[4], ds1307->regs[5],
ds1307->regs[6]);
- t->tm_sec = BCD2BIN(ds1307->regs[DS1307_REG_SECS] & 0x7f);
- t->tm_min = BCD2BIN(ds1307->regs[DS1307_REG_MIN] & 0x7f);
+ t->tm_sec = bcd2bin(ds1307->regs[DS1307_REG_SECS] & 0x7f);
+ t->tm_min = bcd2bin(ds1307->regs[DS1307_REG_MIN] & 0x7f);
tmp = ds1307->regs[DS1307_REG_HOUR] & 0x3f;
- t->tm_hour = BCD2BIN(tmp);
- t->tm_wday = BCD2BIN(ds1307->regs[DS1307_REG_WDAY] & 0x07) - 1;
- t->tm_mday = BCD2BIN(ds1307->regs[DS1307_REG_MDAY] & 0x3f);
+ t->tm_hour = bcd2bin(tmp);
+ t->tm_wday = bcd2bin(ds1307->regs[DS1307_REG_WDAY] & 0x07) - 1;
+ t->tm_mday = bcd2bin(ds1307->regs[DS1307_REG_MDAY] & 0x3f);
tmp = ds1307->regs[DS1307_REG_MONTH] & 0x1f;
- t->tm_mon = BCD2BIN(tmp) - 1;
+ t->tm_mon = bcd2bin(tmp) - 1;
/* assume 20YY not 19YY, and ignore DS1337_BIT_CENTURY */
- t->tm_year = BCD2BIN(ds1307->regs[DS1307_REG_YEAR]) + 100;
+ t->tm_year = bcd2bin(ds1307->regs[DS1307_REG_YEAR]) + 100;
dev_dbg(dev, "%s secs=%d, mins=%d, "
"hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
t->tm_hour, t->tm_mday,
t->tm_mon, t->tm_year, t->tm_wday);
- *buf++ = 0; /* first register addr */
- buf[DS1307_REG_SECS] = BIN2BCD(t->tm_sec);
- buf[DS1307_REG_MIN] = BIN2BCD(t->tm_min);
- buf[DS1307_REG_HOUR] = BIN2BCD(t->tm_hour);
- buf[DS1307_REG_WDAY] = BIN2BCD(t->tm_wday + 1);
- buf[DS1307_REG_MDAY] = BIN2BCD(t->tm_mday);
- buf[DS1307_REG_MONTH] = BIN2BCD(t->tm_mon + 1);
+ buf[DS1307_REG_SECS] = bin2bcd(t->tm_sec);
+ buf[DS1307_REG_MIN] = bin2bcd(t->tm_min);
+ buf[DS1307_REG_HOUR] = bin2bcd(t->tm_hour);
+ buf[DS1307_REG_WDAY] = bin2bcd(t->tm_wday + 1);
+ buf[DS1307_REG_MDAY] = bin2bcd(t->tm_mday);
+ buf[DS1307_REG_MONTH] = bin2bcd(t->tm_mon + 1);
/* assume 20YY not 19YY */
tmp = t->tm_year - 100;
- buf[DS1307_REG_YEAR] = BIN2BCD(tmp);
+ buf[DS1307_REG_YEAR] = bin2bcd(tmp);
switch (ds1307->type) {
case ds_1337:
break;
}
- ds1307->msg[1].flags = 0;
- ds1307->msg[1].len = 8;
-
dev_dbg(dev, "%s: %02x %02x %02x %02x %02x %02x %02x\n",
"write", buf[0], buf[1], buf[2], buf[3],
buf[4], buf[5], buf[6]);
- result = i2c_transfer(to_i2c_adapter(ds1307->client->dev.parent),
- &ds1307->msg[1], 1);
- if (result != 1) {
- dev_err(dev, "%s error %d\n", "write", tmp);
+ result = ds1307->write_block_data(ds1307->client, 0, 7, buf);
+ if (result < 0) {
+ dev_err(dev, "%s error %d\n", "write", result);
+ return result;
+ }
+ return 0;
+}
+
+static int ds1337_read_alarm(struct device *dev, struct rtc_wkalrm *t)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct ds1307 *ds1307 = i2c_get_clientdata(client);
+ int ret;
+
+ if (!test_bit(HAS_ALARM, &ds1307->flags))
+ return -EINVAL;
+
+ /* read all ALARM1, ALARM2, and status registers at once */
+ ret = ds1307->read_block_data(client,
+ DS1339_REG_ALARM1_SECS, 9, ds1307->regs);
+ if (ret != 9) {
+ dev_err(dev, "%s error %d\n", "alarm read", ret);
return -EIO;
}
+
+ dev_dbg(dev, "%s: %02x %02x %02x %02x, %02x %02x %02x, %02x %02x\n",
+ "alarm read",
+ ds1307->regs[0], ds1307->regs[1],
+ ds1307->regs[2], ds1307->regs[3],
+ ds1307->regs[4], ds1307->regs[5],
+ ds1307->regs[6], ds1307->regs[7],
+ ds1307->regs[8]);
+
+ /* report alarm time (ALARM1); assume 24 hour and day-of-month modes,
+ * and that all four fields are checked matches
+ */
+ t->time.tm_sec = bcd2bin(ds1307->regs[0] & 0x7f);
+ t->time.tm_min = bcd2bin(ds1307->regs[1] & 0x7f);
+ t->time.tm_hour = bcd2bin(ds1307->regs[2] & 0x3f);
+ t->time.tm_mday = bcd2bin(ds1307->regs[3] & 0x3f);
+ t->time.tm_mon = -1;
+ t->time.tm_year = -1;
+ t->time.tm_wday = -1;
+ t->time.tm_yday = -1;
+ t->time.tm_isdst = -1;
+
+ /* ... and status */
+ t->enabled = !!(ds1307->regs[7] & DS1337_BIT_A1IE);
+ t->pending = !!(ds1307->regs[8] & DS1337_BIT_A1I);
+
+ dev_dbg(dev, "%s secs=%d, mins=%d, "
+ "hours=%d, mday=%d, enabled=%d, pending=%d\n",
+ "alarm read", t->time.tm_sec, t->time.tm_min,
+ t->time.tm_hour, t->time.tm_mday,
+ t->enabled, t->pending);
+
+ return 0;
+}
+
+static int ds1337_set_alarm(struct device *dev, struct rtc_wkalrm *t)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct ds1307 *ds1307 = i2c_get_clientdata(client);
+ unsigned char *buf = ds1307->regs;
+ u8 control, status;
+ int ret;
+
+ if (!test_bit(HAS_ALARM, &ds1307->flags))
+ return -EINVAL;
+
+ dev_dbg(dev, "%s secs=%d, mins=%d, "
+ "hours=%d, mday=%d, enabled=%d, pending=%d\n",
+ "alarm set", t->time.tm_sec, t->time.tm_min,
+ t->time.tm_hour, t->time.tm_mday,
+ t->enabled, t->pending);
+
+ /* read current status of both alarms and the chip */
+ ret = ds1307->read_block_data(client,
+ DS1339_REG_ALARM1_SECS, 9, buf);
+ if (ret != 9) {
+ dev_err(dev, "%s error %d\n", "alarm write", ret);
+ return -EIO;
+ }
+ control = ds1307->regs[7];
+ status = ds1307->regs[8];
+
+ dev_dbg(dev, "%s: %02x %02x %02x %02x, %02x %02x %02x, %02x %02x\n",
+ "alarm set (old status)",
+ ds1307->regs[0], ds1307->regs[1],
+ ds1307->regs[2], ds1307->regs[3],
+ ds1307->regs[4], ds1307->regs[5],
+ ds1307->regs[6], control, status);
+
+ /* set ALARM1, using 24 hour and day-of-month modes */
+ buf[0] = bin2bcd(t->time.tm_sec);
+ buf[1] = bin2bcd(t->time.tm_min);
+ buf[2] = bin2bcd(t->time.tm_hour);
+ buf[3] = bin2bcd(t->time.tm_mday);
+
+ /* set ALARM2 to non-garbage */
+ buf[4] = 0;
+ buf[5] = 0;
+ buf[6] = 0;
+
+ /* optionally enable ALARM1 */
+ buf[7] = control & ~(DS1337_BIT_A1IE | DS1337_BIT_A2IE);
+ if (t->enabled) {
+ dev_dbg(dev, "alarm IRQ armed\n");
+ buf[7] |= DS1337_BIT_A1IE; /* only ALARM1 is used */
+ }
+ buf[8] = status & ~(DS1337_BIT_A1I | DS1337_BIT_A2I);
+
+ ret = ds1307->write_block_data(client,
+ DS1339_REG_ALARM1_SECS, 9, buf);
+ if (ret < 0) {
+ dev_err(dev, "can't set alarm time\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int ds1307_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct ds1307 *ds1307 = i2c_get_clientdata(client);
+ int ret;
+
+ switch (cmd) {
+ case RTC_AIE_OFF:
+ if (!test_bit(HAS_ALARM, &ds1307->flags))
+ return -ENOTTY;
+
+ ret = i2c_smbus_read_byte_data(client, DS1337_REG_CONTROL);
+ if (ret < 0)
+ return ret;
+
+ ret &= ~DS1337_BIT_A1IE;
+
+ ret = i2c_smbus_write_byte_data(client,
+ DS1337_REG_CONTROL, ret);
+ if (ret < 0)
+ return ret;
+
+ break;
+
+ case RTC_AIE_ON:
+ if (!test_bit(HAS_ALARM, &ds1307->flags))
+ return -ENOTTY;
+
+ ret = i2c_smbus_read_byte_data(client, DS1337_REG_CONTROL);
+ if (ret < 0)
+ return ret;
+
+ ret |= DS1337_BIT_A1IE;
+
+ ret = i2c_smbus_write_byte_data(client,
+ DS1337_REG_CONTROL, ret);
+ if (ret < 0)
+ return ret;
+
+ break;
+
+ default:
+ return -ENOIOCTLCMD;
+ }
+
return 0;
}
static const struct rtc_class_ops ds13xx_rtc_ops = {
.read_time = ds1307_get_time,
.set_time = ds1307_set_time,
+ .read_alarm = ds1337_read_alarm,
+ .set_alarm = ds1337_set_alarm,
+ .ioctl = ds1307_ioctl,
+};
+
+/*----------------------------------------------------------------------*/
+
+#define NVRAM_SIZE 56
+
+static ssize_t
+ds1307_nvram_read(struct kobject *kobj, struct bin_attribute *attr,
+ char *buf, loff_t off, size_t count)
+{
+ struct i2c_client *client;
+ struct ds1307 *ds1307;
+ int result;
+
+ client = kobj_to_i2c_client(kobj);
+ ds1307 = i2c_get_clientdata(client);
+
+ if (unlikely(off >= NVRAM_SIZE))
+ return 0;
+ if ((off + count) > NVRAM_SIZE)
+ count = NVRAM_SIZE - off;
+ if (unlikely(!count))
+ return count;
+
+ result = ds1307->read_block_data(client, 8 + off, count, buf);
+ if (result < 0)
+ dev_err(&client->dev, "%s error %d\n", "nvram read", result);
+ return result;
+}
+
+static ssize_t
+ds1307_nvram_write(struct kobject *kobj, struct bin_attribute *attr,
+ char *buf, loff_t off, size_t count)
+{
+ struct i2c_client *client;
+ struct ds1307 *ds1307;
+ int result;
+
+ client = kobj_to_i2c_client(kobj);
+ ds1307 = i2c_get_clientdata(client);
+
+ if (unlikely(off >= NVRAM_SIZE))
+ return -EFBIG;
+ if ((off + count) > NVRAM_SIZE)
+ count = NVRAM_SIZE - off;
+ if (unlikely(!count))
+ return count;
+
+ result = ds1307->write_block_data(client, 8 + off, count, buf);
+ if (result < 0) {
+ dev_err(&client->dev, "%s error %d\n", "nvram write", result);
+ return result;
+ }
+ return count;
+}
+
+static struct bin_attribute nvram = {
+ .attr = {
+ .name = "nvram",
+ .mode = S_IRUGO | S_IWUSR,
+ },
+
+ .read = ds1307_nvram_read,
+ .write = ds1307_nvram_write,
+ .size = NVRAM_SIZE,
};
+/*----------------------------------------------------------------------*/
+
static struct i2c_driver ds1307_driver;
-static int __devinit
-ds1307_detect(struct i2c_adapter *adapter, int address, int kind)
+static int __devinit ds1307_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
{
struct ds1307 *ds1307;
int err = -ENODEV;
- struct i2c_client *client;
int tmp;
- const struct chip_desc *chip;
+ const struct chip_desc *chip = &chips[id->driver_data];
+ struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
+ int want_irq = false;
+ unsigned char *buf;
- if (!(ds1307 = kzalloc(sizeof(struct ds1307), GFP_KERNEL))) {
- err = -ENOMEM;
- goto exit;
- }
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)
+ && !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_I2C_BLOCK))
+ return -EIO;
- /* REVISIT: pending driver model conversion, set up "client"
- * ourselves, and use a hack to determine the RTC type (instead
- * of reading the client->name we're given)
- */
- client = &ds1307->dev;
- client->addr = address;
- client->adapter = adapter;
- client->driver = &ds1307_driver;
-
- /* HACK: "force" implies "needs ds1337-style-oscillator setup", and
- * that's the only kind of chip setup we'll know about. Until the
- * driver model conversion, here's where to add any board-specific
- * code to say what kind of chip is present...
- */
- if (kind >= 0)
- chip = find_chip("ds1337");
- else
- chip = find_chip("ds1307");
- strlcpy(client->name, chip->name, I2C_NAME_SIZE);
+ if (!(ds1307 = kzalloc(sizeof(struct ds1307), GFP_KERNEL)))
+ return -ENOMEM;
ds1307->client = client;
i2c_set_clientdata(client, ds1307);
-
- ds1307->msg[0].addr = client->addr;
- ds1307->msg[0].flags = 0;
- ds1307->msg[0].len = 1;
- ds1307->msg[0].buf = &ds1307->reg_addr;
-
- ds1307->msg[1].addr = client->addr;
- ds1307->msg[1].flags = I2C_M_RD;
- ds1307->msg[1].len = sizeof(ds1307->regs);
- ds1307->msg[1].buf = ds1307->regs;
-
- ds1307->type = chip->type;
+ ds1307->type = id->driver_data;
+ buf = ds1307->regs;
+ if (i2c_check_functionality(adapter, I2C_FUNC_SMBUS_I2C_BLOCK)) {
+ ds1307->read_block_data = i2c_smbus_read_i2c_block_data;
+ ds1307->write_block_data = i2c_smbus_write_i2c_block_data;
+ } else {
+ ds1307->read_block_data = ds1307_read_block_data;
+ ds1307->write_block_data = ds1307_write_block_data;
+ }
switch (ds1307->type) {
case ds_1337:
case ds_1339:
- ds1307->reg_addr = DS1337_REG_CONTROL;
- ds1307->msg[1].len = 2;
-
+ /* has IRQ? */
+ if (ds1307->client->irq > 0 && chip->alarm) {
+ INIT_WORK(&ds1307->work, ds1307_work);
+ want_irq = true;
+ }
/* get registers that the "rtc" read below won't read... */
- tmp = i2c_transfer(adapter, ds1307->msg, 2);
+ tmp = ds1307->read_block_data(ds1307->client,
+ DS1337_REG_CONTROL, 2, buf);
if (tmp != 2) {
pr_debug("read error %d\n", tmp);
err = -EIO;
goto exit_free;
}
- ds1307->reg_addr = 0;
- ds1307->msg[1].len = sizeof(ds1307->regs);
-
/* oscillator off? turn it on, so clock can tick. */
if (ds1307->regs[0] & DS1337_BIT_nEOSC)
- i2c_smbus_write_byte_data(client, DS1337_REG_CONTROL,
- ds1307->regs[0] & ~DS1337_BIT_nEOSC);
+ ds1307->regs[0] &= ~DS1337_BIT_nEOSC;
+
+ /* Using IRQ? Disable the square wave and both alarms.
+ * For ds1339, be sure alarms can trigger when we're
+ * running on Vbackup (BBSQI); we assume ds1337 will
+ * ignore that bit
+ */
+ if (want_irq) {
+ ds1307->regs[0] |= DS1337_BIT_INTCN | DS1339_BIT_BBSQI;
+ ds1307->regs[0] &= ~(DS1337_BIT_A2IE | DS1337_BIT_A1IE);
+ }
+
+ i2c_smbus_write_byte_data(client, DS1337_REG_CONTROL,
+ ds1307->regs[0]);
/* oscillator fault? clear flag, and warn */
if (ds1307->regs[1] & DS1337_BIT_OSF) {
dev_warn(&client->dev, "SET TIME!\n");
}
break;
+
+ case rx_8025:
+ tmp = i2c_smbus_read_i2c_block_data(ds1307->client,
+ RX8025_REG_CTRL1 << 4 | 0x08, 2, buf);
+ if (tmp != 2) {
+ pr_debug("read error %d\n", tmp);
+ err = -EIO;
+ goto exit_free;
+ }
+
+ /* oscillator off? turn it on, so clock can tick. */
+ if (!(ds1307->regs[1] & RX8025_BIT_XST)) {
+ ds1307->regs[1] |= RX8025_BIT_XST;
+ i2c_smbus_write_byte_data(client,
+ RX8025_REG_CTRL2 << 4 | 0x08,
+ ds1307->regs[1]);
+ dev_warn(&client->dev,
+ "oscillator stop detected - SET TIME!\n");
+ }
+
+ if (ds1307->regs[1] & RX8025_BIT_PON) {
+ ds1307->regs[1] &= ~RX8025_BIT_PON;
+ i2c_smbus_write_byte_data(client,
+ RX8025_REG_CTRL2 << 4 | 0x08,
+ ds1307->regs[1]);
+ dev_warn(&client->dev, "power-on detected\n");
+ }
+
+ if (ds1307->regs[1] & RX8025_BIT_VDET) {
+ ds1307->regs[1] &= ~RX8025_BIT_VDET;
+ i2c_smbus_write_byte_data(client,
+ RX8025_REG_CTRL2 << 4 | 0x08,
+ ds1307->regs[1]);
+ dev_warn(&client->dev, "voltage drop detected\n");
+ }
+
+ /* make sure we are running in 24hour mode */
+ if (!(ds1307->regs[0] & RX8025_BIT_2412)) {
+ u8 hour;
+
+ /* switch to 24 hour mode */
+ i2c_smbus_write_byte_data(client,
+ RX8025_REG_CTRL1 << 4 | 0x08,
+ ds1307->regs[0] |
+ RX8025_BIT_2412);
+
+ tmp = i2c_smbus_read_i2c_block_data(ds1307->client,
+ RX8025_REG_CTRL1 << 4 | 0x08, 2, buf);
+ if (tmp != 2) {
+ pr_debug("read error %d\n", tmp);
+ err = -EIO;
+ goto exit_free;
+ }
+
+ /* correct hour */
+ hour = bcd2bin(ds1307->regs[DS1307_REG_HOUR]);
+ if (hour == 12)
+ hour = 0;
+ if (ds1307->regs[DS1307_REG_HOUR] & DS1307_BIT_PM)
+ hour += 12;
+
+ i2c_smbus_write_byte_data(client,
+ DS1307_REG_HOUR << 4 | 0x08,
+ hour);
+ }
+ break;
default:
break;
}
read_rtc:
/* read RTC registers */
-
- tmp = i2c_transfer(adapter, ds1307->msg, 2);
- if (tmp != 2) {
+ tmp = ds1307->read_block_data(ds1307->client, 0, 8, buf);
+ if (tmp != 8) {
pr_debug("read error %d\n", tmp);
err = -EIO;
goto exit_free;
*/
tmp = ds1307->regs[DS1307_REG_SECS];
switch (ds1307->type) {
- case ds_1340:
- /* FIXME read register with DS1340_BIT_OSF, use that to
- * trigger the "set time" warning (*after* restarting the
- * oscillator!) instead of this weaker ds1307/m41t00 test.
- */
case ds_1307:
case m41t00:
/* clock halted? turn it on, so clock can tick. */
/* oscillator fault? clear flag, and warn */
if (ds1307->regs[DS1307_REG_CONTROL] & DS1338_BIT_OSF) {
i2c_smbus_write_byte_data(client, DS1307_REG_CONTROL,
- ds1307->regs[DS1337_REG_CONTROL]
+ ds1307->regs[DS1307_REG_CONTROL]
& ~DS1338_BIT_OSF);
dev_warn(&client->dev, "SET TIME!\n");
goto read_rtc;
}
break;
- default:
- break;
- }
-
- tmp = ds1307->regs[DS1307_REG_SECS];
- tmp = BCD2BIN(tmp & 0x7f);
- if (tmp > 60)
- goto exit_free;
- tmp = BCD2BIN(ds1307->regs[DS1307_REG_MIN] & 0x7f);
- if (tmp > 60)
- goto exit_free;
+ case ds_1340:
+ /* clock halted? turn it on, so clock can tick. */
+ if (tmp & DS1340_BIT_nEOSC)
+ i2c_smbus_write_byte_data(client, DS1307_REG_SECS, 0);
- tmp = BCD2BIN(ds1307->regs[DS1307_REG_MDAY] & 0x3f);
- if (tmp == 0 || tmp > 31)
- goto exit_free;
+ tmp = i2c_smbus_read_byte_data(client, DS1340_REG_FLAG);
+ if (tmp < 0) {
+ pr_debug("read error %d\n", tmp);
+ err = -EIO;
+ goto exit_free;
+ }
- tmp = BCD2BIN(ds1307->regs[DS1307_REG_MONTH] & 0x1f);
- if (tmp == 0 || tmp > 12)
- goto exit_free;
+ /* oscillator fault? clear flag, and warn */
+ if (tmp & DS1340_BIT_OSF) {
+ i2c_smbus_write_byte_data(client, DS1340_REG_FLAG, 0);
+ dev_warn(&client->dev, "SET TIME!\n");
+ }
+ break;
+ case rx_8025:
+ case ds_1337:
+ case ds_1339:
+ break;
+ }
- /* force into in 24 hour mode (most chips) or
- * disable century bit (ds1340)
- *
- * REVISIT forcing 24 hour mode can prevent multi-master
- * configs from sharing this RTC ... don't do this.
- * The clock needs to be reset after changing it, too...
- */
tmp = ds1307->regs[DS1307_REG_HOUR];
- if (tmp & (1 << 6)) {
- if (tmp & (1 << 5))
- tmp = BCD2BIN(tmp & 0x1f) + 12;
- else
- tmp = BCD2BIN(tmp);
+ switch (ds1307->type) {
+ case ds_1340:
+ case m41t00:
+ /* NOTE: ignores century bits; fix before deploying
+ * systems that will run through year 2100.
+ */
+ break;
+ case rx_8025:
+ break;
+ default:
+ if (!(tmp & DS1307_BIT_12HR))
+ break;
+
+ /* Be sure we're in 24 hour mode. Multi-master systems
+ * take note...
+ */
+ tmp = bcd2bin(tmp & 0x1f);
+ if (tmp == 12)
+ tmp = 0;
+ if (ds1307->regs[DS1307_REG_HOUR] & DS1307_BIT_PM)
+ tmp += 12;
i2c_smbus_write_byte_data(client,
DS1307_REG_HOUR,
- BIN2BCD(tmp));
+ bin2bcd(tmp));
}
- /* Tell the I2C layer a new client has arrived */
- if ((err = i2c_attach_client(client)))
- goto exit_free;
-
ds1307->rtc = rtc_device_register(client->name, &client->dev,
&ds13xx_rtc_ops, THIS_MODULE);
if (IS_ERR(ds1307->rtc)) {
err = PTR_ERR(ds1307->rtc);
dev_err(&client->dev,
"unable to register the class device\n");
- goto exit_detach;
+ goto exit_free;
+ }
+
+ if (want_irq) {
+ err = request_irq(client->irq, ds1307_irq, 0,
+ ds1307->rtc->name, client);
+ if (err) {
+ dev_err(&client->dev,
+ "unable to request IRQ!\n");
+ goto exit_irq;
+ }
+ set_bit(HAS_ALARM, &ds1307->flags);
+ dev_dbg(&client->dev, "got IRQ %d\n", client->irq);
+ }
+
+ if (chip->nvram56) {
+ err = sysfs_create_bin_file(&client->dev.kobj, &nvram);
+ if (err == 0) {
+ set_bit(HAS_NVRAM, &ds1307->flags);
+ dev_info(&client->dev, "56 bytes nvram\n");
+ }
}
return 0;
-exit_detach:
- i2c_detach_client(client);
+exit_irq:
+ if (ds1307->rtc)
+ rtc_device_unregister(ds1307->rtc);
exit_free:
kfree(ds1307);
-exit:
return err;
}
-static int __devinit
-ds1307_attach_adapter(struct i2c_adapter *adapter)
+static int __devexit ds1307_remove(struct i2c_client *client)
{
- if (!i2c_check_functionality(adapter, I2C_FUNC_I2C))
- return 0;
- return i2c_probe(adapter, &addr_data, ds1307_detect);
-}
+ struct ds1307 *ds1307 = i2c_get_clientdata(client);
-static int __devexit ds1307_detach_client(struct i2c_client *client)
-{
- int err;
- struct ds1307 *ds1307 = i2c_get_clientdata(client);
+ if (test_and_clear_bit(HAS_ALARM, &ds1307->flags)) {
+ free_irq(client->irq, client);
+ cancel_work_sync(&ds1307->work);
+ }
+
+ if (test_and_clear_bit(HAS_NVRAM, &ds1307->flags))
+ sysfs_remove_bin_file(&client->dev.kobj, &nvram);
rtc_device_unregister(ds1307->rtc);
- if ((err = i2c_detach_client(client)))
- return err;
kfree(ds1307);
return 0;
}
static struct i2c_driver ds1307_driver = {
.driver = {
- .name = "ds1307",
+ .name = "rtc-ds1307",
.owner = THIS_MODULE,
},
- .attach_adapter = ds1307_attach_adapter,
- .detach_client = __devexit_p(ds1307_detach_client),
+ .probe = ds1307_probe,
+ .remove = __devexit_p(ds1307_remove),
+ .id_table = ds1307_id,
};
static int __init ds1307_init(void)
Code Review / linux-2.6.git / blobdiff