# Misc strange devices
#
-menuconfig MISC_DEVICES
- bool "Misc devices"
- default y
- ---help---
- Say Y here to get to see options for device drivers from various
- different categories. This option alone does not add any kernel code.
+menu "Misc devices"
- If you say N, all options in this submenu will be skipped and disabled.
-
-if MISC_DEVICES
+config SENSORS_LIS3LV02D
+ tristate
+ depends on INPUT
+ select INPUT_POLLDEV
+ default n
config AD525X_DPOT
- tristate "Analog Devices AD525x Digital Potentiometers"
- depends on I2C && SYSFS
+ tristate "Analog Devices Digital Potentiometers"
+ depends on (I2C || SPI) && SYSFS
help
If you say yes here, you get support for the Analog Devices
- AD5258, AD5259, AD5251, AD5252, AD5253, AD5254 and AD5255
+ AD5258, AD5259, AD5251, AD5252, AD5253, AD5254, AD5255
+ AD5160, AD5161, AD5162, AD5165, AD5200, AD5201, AD5203,
+ AD5204, AD5206, AD5207, AD5231, AD5232, AD5233, AD5235,
+ AD5260, AD5262, AD5263, AD5290, AD5291, AD5292, AD5293,
+ AD7376, AD8400, AD8402, AD8403, ADN2850, AD5241, AD5242,
+ AD5243, AD5245, AD5246, AD5247, AD5248, AD5280, AD5282,
+ ADN2860, AD5273, AD5171, AD5170, AD5172, AD5173, AD5270,
+ AD5271, AD5272, AD5274
digital potentiometer chips.
See Documentation/misc-devices/ad525x_dpot.txt for the
This driver can also be built as a module. If so, the module
will be called ad525x_dpot.
+config AD525X_DPOT_I2C
+ tristate "support I2C bus connection"
+ depends on AD525X_DPOT && I2C
+ help
+ Say Y here if you have a digital potentiometers hooked to an I2C bus.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ad525x_dpot-i2c.
+
+config AD525X_DPOT_SPI
+ tristate "support SPI bus connection"
+ depends on AD525X_DPOT && SPI_MASTER
+ help
+ Say Y here if you have a digital potentiometers hooked to an SPI bus.
+
+ If unsure, say N (but it's safe to say "Y").
+
+ To compile this driver as a module, choose M here: the
+ module will be called ad525x_dpot-spi.
+
config ATMEL_PWM
tristate "Atmel AT32/AT91 PWM support"
- depends on AVR32 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9
+ depends on HAVE_CLK
help
This option enables device driver support for the PWM channels
on certain Atmel processors. Pulse Width Modulation is used for
purposes including software controlled power-efficient backlights
on LCD displays, motor control, and waveform generation.
+config AB8500_PWM
+ bool "AB8500 PWM support"
+ depends on AB8500_CORE && ARCH_U8500
+ select HAVE_PWM
+ help
+ This driver exports functions to enable/disble/config/free Pulse
+ Width Modulation in the Analog Baseband Chip AB8500.
+ It is used by led and backlight driver to control the intensity.
+
config ATMEL_TCLIB
bool "Atmel AT32/AT91 Timer/Counter Library"
depends on (AVR32 || ARCH_AT91)
config ATMEL_TCB_CLKSRC
bool "TC Block Clocksource"
- depends on ATMEL_TCLIB && GENERIC_TIME
+ depends on ATMEL_TCLIB
default y
help
Select this to get a high precision clocksource based on a
WARNING: This software may not be supported or function
correctly on your IBM server. Please consult the IBM ServerProven
- website <http://www.pc.ibm.com/ww/eserver/xseries/serverproven> for
- information on the specific driver level and support statement
+ website <http://www-03.ibm.com/systems/info/x86servers/serverproven/compat/us/>
+ for information on the specific driver level and support statement
for your IBM server.
config PHANTOM
If you choose to build module, its name will be phantom. If unsure,
say N here.
+config INTEL_MID_PTI
+ tristate "Parallel Trace Interface for MIPI P1149.7 cJTAG standard"
+ depends on PCI
+ default n
+ help
+ The PTI (Parallel Trace Interface) driver directs
+ trace data routed from various parts in the system out
+ through an Intel Penwell PTI port and out of the mobile
+ device for analysis with a debugging tool (Lauterbach or Fido).
+
+ You should select this driver if the target kernel is meant for
+ an Intel Atom (non-netbook) mobile device containing a MIPI
+ P1149.7 standard implementation.
+
config SGI_IOC4
tristate "SGI IOC4 Base IO support"
depends on PCI
driver (SCSI/ATA) which supports enclosures
or a SCSI enclosure device (SES) to use these services.
+config KERNEL_DEBUGGER_CORE
+ bool "Kernel Debugger Core"
+ default n
+ ---help---
+ Generic kernel debugging command processor used by low level
+ (interrupt context) platform-specific debuggers.
+
config SGI_XP
tristate "Support communication between SGI SSIs"
depends on NET
this feature will allow for direct communication between SSIs
based on a network adapter and DMA messaging.
+config CS5535_MFGPT
+ tristate "CS5535/CS5536 Geode Multi-Function General Purpose Timer (MFGPT) support"
+ depends on PCI && X86 && MFD_CS5535
+ default n
+ help
+ This driver provides access to MFGPT functionality for other
+ drivers that need timers. MFGPTs are available in the CS5535 and
+ CS5536 companion chips that are found in AMD Geode and several
+ other platforms. They have a better resolution and max interval
+ than the generic PIT, and are suitable for use as high-res timers.
+ You probably don't want to enable this manually; other drivers that
+ make use of it should enable it.
+
+config CS5535_MFGPT_DEFAULT_IRQ
+ int
+ depends on CS5535_MFGPT
+ default 7
+ help
+ MFGPTs on the CS5535 require an interrupt. The selected IRQ
+ can be overridden as a module option as well as by driver that
+ use the cs5535_mfgpt_ API; however, different architectures might
+ want to use a different IRQ by default. This is here for
+ architectures to set as necessary.
+
+config CS5535_CLOCK_EVENT_SRC
+ tristate "CS5535/CS5536 high-res timer (MFGPT) events"
+ depends on GENERIC_CLOCKEVENTS && CS5535_MFGPT
+ help
+ This driver provides a clock event source based on the MFGPT
+ timer(s) in the CS5535 and CS5536 companion chips.
+ MFGPTs have a better resolution and max interval than the
+ generic PIT, and are suitable for use as high-res timers.
+
config HP_ILO
- tristate "Channel interface driver for HP iLO/iLO2 processor"
+ tristate "Channel interface driver for the HP iLO processor"
depends on PCI
default n
help
The channel interface driver allows applications to communicate
- with iLO/iLO2 management processors present on HP ProLiant
- servers. Upon loading, the driver creates /dev/hpilo/dXccbN files,
- which can be used to gather data from the management processor,
- via read and write system calls.
+ with iLO management processors present on HP ProLiant servers.
+ Upon loading, the driver creates /dev/hpilo/dXccbN files, which
+ can be used to gather data from the management processor, via
+ read and write system calls.
To compile this driver as a module, choose M here: the
module will be called hpilo.
This option enables addition debugging code for the SGI GRU driver. If
you are unsure, say N.
-config DELL_LAPTOP
- tristate "Dell Laptop Extras (EXPERIMENTAL)"
- depends on X86
- depends on DCDBAS
- depends on EXPERIMENTAL
- depends on BACKLIGHT_CLASS_DEVICE
- depends on RFKILL
- depends on POWER_SUPPLY
- default n
- ---help---
- This driver adds support for rfkill and backlight control to Dell
- laptops.
+config APDS9802ALS
+ tristate "Medfield Avago APDS9802 ALS Sensor module"
+ depends on I2C
+ help
+ If you say yes here you get support for the ALS APDS9802 ambient
+ light sensor.
+
+ This driver can also be built as a module. If so, the module
+ will be called apds9802als.
config ISL29003
tristate "Intersil ISL29003 ambient light sensor"
This driver can also be built as a module. If so, the module
will be called isl29003.
+config ISL29020
+ tristate "Intersil ISL29020 ambient light sensor"
+ depends on I2C
+ help
+ If you say yes here you get support for the Intersil ISL29020
+ ambient light sensor.
+
+ This driver can also be built as a module. If so, the module
+ will be called isl29020.
+
+config SENSORS_TSL2550
+ tristate "Taos TSL2550 ambient light sensor"
+ depends on I2C && SYSFS
+ help
+ If you say yes here you get support for the Taos TSL2550
+ ambient light sensor.
+
+ This driver can also be built as a module. If so, the module
+ will be called tsl2550.
+
+config SENSORS_BH1780
+ tristate "ROHM BH1780GLI ambient light sensor"
+ depends on I2C && SYSFS
+ help
+ If you say yes here you get support for the ROHM BH1780GLI
+ ambient light sensor.
+
+ This driver can also be built as a module. If so, the module
+ will be called bh1780gli.
+
+config SENSORS_BH1770
+ tristate "BH1770GLC / SFH7770 combined ALS - Proximity sensor"
+ depends on I2C
+ ---help---
+ Say Y here if you want to build a driver for BH1770GLC (ROHM) or
+ SFH7770 (Osram) combined ambient light and proximity sensor chip.
+
+ To compile this driver as a module, choose M here: the
+ module will be called bh1770glc. If unsure, say N here.
+
+config SENSORS_APDS990X
+ tristate "APDS990X combined als and proximity sensors"
+ depends on I2C
+ default n
+ ---help---
+ Say Y here if you want to build a driver for Avago APDS990x
+ combined ambient light and proximity sensor chip.
+
+ To compile this driver as a module, choose M here: the
+ module will be called apds990x. If unsure, say N here.
+
+config HMC6352
+ tristate "Honeywell HMC6352 compass"
+ depends on I2C
+ help
+ This driver provides support for the Honeywell HMC6352 compass,
+ providing configuration and heading data via sysfs.
+
+config SENSORS_NCT1008
+ tristate "ON Semiconductor Temperature Sensor"
+ default n
+ depends on I2C
+ help
+ Say yes here if you wish to include the ON Semiconductor
+ NCT1008 Temperature sensor.
+
+config SENSORS_AK8975
+ tristate "AK8975 compass support"
+ default n
+ depends on I2C
+ help
+ If you say yes here you get support for Asahi Kasei's
+ orientation sensor AK8975.
+
config EP93XX_PWM
tristate "EP93xx PWM support"
depends on ARCH_EP93XX
This driver can also be built as a module. If so, the module
will be called ds1682.
+config SPEAR13XX_PCIE_GADGET
+ bool "PCIe gadget support for SPEAr13XX platform"
+ depends on ARCH_SPEAR13XX
+ default n
+ help
+ This option enables gadget support for PCIe controller. If
+ board file defines any controller as PCIe endpoint then a sysfs
+ entry will be created for that controller. User can use these
+ sysfs node to configure PCIe EP as per his requirements.
+
+config TI_DAC7512
+ tristate "Texas Instruments DAC7512"
+ depends on SPI && SYSFS
+ help
+ If you say yes here you get support for the Texas Instruments
+ DAC7512 16-bit digital-to-analog converter.
+
+ This driver can also be built as a module. If so, the module
+ will be called ti_dac7512.
+
+config UID_STAT
+ bool "UID based statistics tracking exported to /proc/uid_stat"
+ default n
+
+config VMWARE_BALLOON
+ tristate "VMware Balloon Driver"
+ depends on X86
+ help
+ This is VMware physical memory management driver which acts
+ like a "balloon" that can be inflated to reclaim physical pages
+ by reserving them in the guest and invalidating them in the
+ monitor, freeing up the underlying machine pages so they can
+ be allocated to other guests. The balloon can also be deflated
+ to allow the guest to use more physical memory.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called vmw_balloon.
+
+config ARM_CHARLCD
+ bool "ARM Ltd. Character LCD Driver"
+ depends on PLAT_VERSATILE
+ help
+ This is a driver for the character LCD found on the ARM Ltd.
+ Versatile and RealView Platform Baseboards. It doesn't do
+ very much more than display the text "ARM Linux" on the first
+ line and the Linux version on the second line, but that's
+ still useful.
+
+config BMP085
+ tristate "BMP085 digital pressure sensor"
+ depends on I2C && SYSFS
+ help
+ If you say yes here you get support for the Bosch Sensortec
+ BMP085 digital pressure sensor.
+
+ To compile this driver as a module, choose M here: the
+ module will be called bmp085.
+
+config PCH_PHUB
+ tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) PHUB"
+ depends on PCI
+ help
+ This driver is for PCH(Platform controller Hub) PHUB(Packet Hub) of
+ Intel Topcliff which is an IOH(Input/Output Hub) for x86 embedded
+ processor. The Topcliff has MAC address and Option ROM data in SROM.
+ This driver can access MAC address and Option ROM data in SROM.
+
+ This driver also can be used for LAPIS Semiconductor's IOH,
+ ML7213/ML7223/ML7831.
+ ML7213 which is for IVI(In-Vehicle Infotainment) use.
+ ML7223 IOH is for MP(Media Phone) use.
+ ML7831 IOH is for general purpose use.
+ ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series.
+ ML7213/ML7223/ML7831 is completely compatible for Intel EG20T PCH.
+
+ To compile this driver as a module, choose M here: the module will
+ be called pch_phub.
+
+config USB_SWITCH_FSA9480
+ tristate "FSA9480 USB Switch"
+ depends on I2C
+ help
+ The FSA9480 is a USB port accessory detector and switch.
+ The FSA9480 is fully controlled using I2C and enables USB data,
+ stereo and mono audio, video, microphone and UART data to use
+ a common connector port.
+
+config MAX8997_MUIC
+ tristate "MAX8997 MUIC Support"
+ depends on MFD_MAX8997
+ help
+ If you say yes here you get support for the MUIC device of
+ Maxim MAX8997 PMIC.
+ The MAX8997 MUIC is a USB port accessory detector and switch.
+
+config WL127X_RFKILL
+ tristate "Bluetooth power control driver for TI wl127x"
+ depends on RFKILL
+ default n
+ ---help---
+ Creates an rfkill entry in sysfs for power control of Bluetooth
+ TI wl127x chips.
+
+config BCM4329_RFKILL
+ bool "Enable BCM4329 RFKILL driver"
+ default n
+ ---help---
+ Adds BCM4329 RFKILL driver for Broadcom BCM4329 chipset
+
+config TEGRA_CRYPTO_DEV
+ bool "Device node to access tegra aes hardware"
+ ---help---
+ Dev node /dev/tegra-crypto in order to get access to tegra aes
+ hardware from user space
+
+config MAX1749_VIBRATOR
+ bool "MAX1749 vibrator device driver"
+ depends on ANDROID_TIMED_OUTPUT
+ default n
+ ---help---
+ Adds a timed output vibrator device node for MAX1749 vibrator motor
+
+config APANIC
+ bool "Android kernel panic diagnostics driver"
+ default n
+ ---help---
+ Driver which handles kernel panics and attempts to write
+ critical debugging data to flash.
+
+config APANIC_PLABEL
+ string "Android panic dump flash partition label"
+ default "kpanic"
+ ---help---
+ If your platform uses a different flash partition label for storing
+ crashdumps, enter it here.
+
source "drivers/misc/c2port/Kconfig"
source "drivers/misc/eeprom/Kconfig"
source "drivers/misc/cb710/Kconfig"
source "drivers/misc/iwmc3200top/Kconfig"
-
-endif # MISC_DEVICES
+source "drivers/misc/ti-st/Kconfig"
+source "drivers/misc/lis3lv02d/Kconfig"
+source "drivers/misc/carma/Kconfig"
+source "drivers/misc/altera-stapl/Kconfig"
+source "drivers/misc/inv_mpu/Kconfig"
+source "drivers/misc/tegra-baseband/Kconfig"
+endmenu
Code Review / linux-2.6.git / blobdiff