# Misc strange devices
#
-# This one has to live outside of the MISC_DEVICES conditional,
-# because it may be selected by drivers/platform/x86/hp_accel.
+menu "Misc devices"
+
config SENSORS_LIS3LV02D
tristate
depends on INPUT
select INPUT_POLLDEV
default n
-menuconfig MISC_DEVICES
- bool "Misc devices"
- ---help---
- Say Y here to get to see options for device drivers from various
- different categories. This option alone does not add any kernel code.
-
- If you say N, all options in this submenu will be skipped and disabled.
-
-if MISC_DEVICES
-
config AD525X_DPOT
tristate "Analog Devices Digital Potentiometers"
depends on (I2C || SPI) && SYSFS
config ATMEL_PWM
tristate "Atmel AT32/AT91 PWM support"
- depends on AVR32 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9
+ depends on HAVE_CLK
help
This option enables device driver support for the PWM channels
on certain Atmel processors. Pulse Width Modulation is used for
If you choose to build module, its name will be phantom. If unsure,
say N here.
+config INTEL_MID_PTI
+ tristate "Parallel Trace Interface for MIPI P1149.7 cJTAG standard"
+ depends on PCI
+ default n
+ help
+ The PTI (Parallel Trace Interface) driver directs
+ trace data routed from various parts in the system out
+ through an Intel Penwell PTI port and out of the mobile
+ device for analysis with a debugging tool (Lauterbach or Fido).
+
+ You should select this driver if the target kernel is meant for
+ an Intel Atom (non-netbook) mobile device containing a MIPI
+ P1149.7 standard implementation.
+
config SGI_IOC4
tristate "SGI IOC4 Base IO support"
depends on PCI
config CS5535_MFGPT
tristate "CS5535/CS5536 Geode Multi-Function General Purpose Timer (MFGPT) support"
- depends on PCI
- depends on X86
+ depends on PCI && X86 && MFD_CS5535
default n
help
This driver provides access to MFGPT functionality for other
This driver provides support for the Honeywell HMC6352 compass,
providing configuration and heading data via sysfs.
+config SENSORS_NCT1008
+ tristate "ON Semiconductor Temperature Sensor"
+ default n
+ depends on I2C
+ help
+ Say yes here if you wish to include the ON Semiconductor
+ NCT1008 Temperature sensor.
+
config EP93XX_PWM
tristate "EP93xx PWM support"
depends on ARCH_EP93XX
module will be called bmp085.
config PCH_PHUB
- tristate "PCH Packet Hub of Intel Topcliff / OKI SEMICONDUCTOR ML7213"
+ tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) PHUB"
depends on PCI
help
This driver is for PCH(Platform controller Hub) PHUB(Packet Hub) of
processor. The Topcliff has MAC address and Option ROM data in SROM.
This driver can access MAC address and Option ROM data in SROM.
- This driver also can be used for OKI SEMICONDUCTOR's ML7213 which is
- for IVI(In-Vehicle Infotainment) use.
- ML7213 is companion chip for Intel Atom E6xx series.
- ML7213 is completely compatible for Intel EG20T PCH.
+ This driver also can be used for LAPIS Semiconductor's IOH,
+ ML7213/ML7223/ML7831.
+ ML7213 which is for IVI(In-Vehicle Infotainment) use.
+ ML7223 IOH is for MP(Media Phone) use.
+ ML7831 IOH is for general purpose use.
+ ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series.
+ ML7213/ML7223/ML7831 is completely compatible for Intel EG20T PCH.
To compile this driver as a module, choose M here: the module will
be called pch_phub.
+config USB_SWITCH_FSA9480
+ tristate "FSA9480 USB Switch"
+ depends on I2C
+ help
+ The FSA9480 is a USB port accessory detector and switch.
+ The FSA9480 is fully controlled using I2C and enables USB data,
+ stereo and mono audio, video, microphone and UART data to use
+ a common connector port.
+
+config MAX8997_MUIC
+ tristate "MAX8997 MUIC Support"
+ depends on MFD_MAX8997
+ help
+ If you say yes here you get support for the MUIC device of
+ Maxim MAX8997 PMIC.
+ The MAX8997 MUIC is a USB port accessory detector and switch.
+
+config BCM4329_RFKILL
+ bool "Enable BCM4329 RFKILL driver"
+ default n
+ ---help---
+ Adds BCM4329 RFKILL driver for Broadcom BCM4329 chipset
+
+config TEGRA_CRYPTO_DEV
+ bool "Device node to access tegra aes hardware"
+ ---help---
+ Dev node /dev/tegra-crypto in order to get access to tegra aes
+ hardware from user space
+
+config MAX1749_VIBRATOR
+ bool "MAX1749 vibrator device driver"
+ depends on ANDROID_TIMED_OUTPUT
+ default n
+ ---help---
+ Adds a timed output vibrator device node for MAX1749 vibrator motor
+
source "drivers/misc/c2port/Kconfig"
source "drivers/misc/eeprom/Kconfig"
source "drivers/misc/cb710/Kconfig"
source "drivers/misc/iwmc3200top/Kconfig"
source "drivers/misc/ti-st/Kconfig"
source "drivers/misc/lis3lv02d/Kconfig"
-
-endif # MISC_DEVICES
+source "drivers/misc/carma/Kconfig"
+source "drivers/misc/altera-stapl/Kconfig"
+source "drivers/misc/inv_mpu/Kconfig"
+endmenu