#
config MMU
- bool
- default y
+ def_bool y
+
+config ZONE_DMA
+ def_bool y
+ depends on 64BIT
+
+config LOCKDEP_SUPPORT
+ def_bool y
+
+config STACKTRACE_SUPPORT
+ def_bool y
config RWSEM_GENERIC_SPINLOCK
bool
config RWSEM_XCHGADD_ALGORITHM
- bool
- default y
+ def_bool y
-config GENERIC_CALIBRATE_DELAY
+config ARCH_HAS_ILOG2_U32
bool
- default y
+ default n
-config GENERIC_BUST_SPINLOCK
+config ARCH_HAS_ILOG2_U64
bool
+ default n
-mainmenu "Linux Kernel Configuration"
+config GENERIC_HWEIGHT
+ def_bool y
-config ARCH_S390
- bool
- default y
+config GENERIC_TIME
+ def_bool y
-config UID16
+config GENERIC_BUG
bool
+ depends on BUG
default y
- depends on ARCH_S390X = 'n'
+
+config NO_IOMEM
+ def_bool y
+
+config NO_DMA
+ def_bool y
+
+mainmenu "Linux Kernel Configuration"
+
+config S390
+ def_bool y
source "init/Kconfig"
comment "Processor type and features"
-config ARCH_S390X
+config 64BIT
bool "64 bit kernel"
help
Select this option if you have a 64 bit IBM zSeries machine
and want to use the 64 bit addressing mode.
-config 64BIT
- def_bool ARCH_S390X
-
-config ARCH_S390_31
+config 32BIT
bool
- depends on ARCH_S390X = 'n'
- default y
+ default y if !64BIT
config SMP
bool "Symmetric multi-processing support"
on older S/390 machines. Say Y unless you know your machine doesn't
need this.
-config S390_SUPPORT
+config COMPAT
bool "Kernel support for 31 bit emulation"
- depends on ARCH_S390X
+ depends on 64BIT
help
Select this option if you want to enable your system kernel to
handle system-calls from ELF binaries for 31 bit ESA. This option
(and some other stuff like libraries and such) is needed for
executing 31 bit applications. It is safe to say "Y".
-config COMPAT
+config SYSVIPC_COMPAT
bool
- depends on S390_SUPPORT
+ depends on COMPAT && SYSVIPC
default y
-config SYSVIPC_COMPAT
+config AUDIT_ARCH
bool
- depends on COMPAT && SYSVIPC
default y
-config BINFMT_ELF32
- tristate "Kernel support for 31 bit ELF binaries"
- depends on S390_SUPPORT
+config S390_SWITCH_AMODE
+ bool "Switch kernel/user addressing modes"
+ help
+ This option allows to switch the addressing modes of kernel and user
+ space. The kernel parameter switch_amode=on will enable this feature,
+ default is disabled. Enabling this (via kernel parameter) on machines
+ earlier than IBM System z9-109 EC/BC will reduce system performance.
+
+ Note that this option will also be selected by selecting the execute
+ protection option below. Enabling the execute protection via the
+ noexec kernel parameter will also switch the addressing modes,
+ independent of the switch_amode kernel parameter.
+
+
+config S390_EXEC_PROTECT
+ bool "Data execute protection"
+ select S390_SWITCH_AMODE
help
- This allows you to run 32-bit Linux/ELF binaries on your zSeries
- in 64 bit mode. Everybody wants this; say Y.
+ This option allows to enable a buffer overflow protection for user
+ space programs and it also selects the addressing mode option above.
+ The kernel parameter noexec=on will enable this feature and also
+ switch the addressing modes, default is disabled. Enabling this (via
+ kernel parameter) on machines earlier than IBM System z9-109 EC/BC
+ will reduce system performance.
comment "Code generation options"
config MARCH_G5
bool "S/390 model G5 and G6"
- depends on ARCH_S390_31
+ depends on !64BIT
help
Select this to build a 31 bit kernel that works
on all S/390 and zSeries machines.
This will be slightly faster but does not work on
older machines such as the z900.
+config MARCH_Z9_109
+ bool "IBM System z9"
+ help
+ Select this to enable optimizations for IBM System z9-109, IBM
+ System z9 Enterprise Class (z9 EC), and IBM System z9 Business
+ Class (z9 BC). The kernel will be slightly faster but will not
+ work on older machines such as the z990, z890, z900, and z800.
+
endchoice
config PACK_STACK
config SMALL_STACK
bool "Use 4kb/8kb for kernel stack instead of 8kb/16kb"
- depends on PACK_STACK
+ depends on PACK_STACK && !LOCKDEP
help
If you say Y here and the compiler supports the -mkernel-backchain
option the kernel will use a smaller kernel stack size. For 31 bit
This allows you to specify the maximum frame size a function may
have without the compiler complaining about it.
+config ARCH_POPULATES_NODE_MAP
+ def_bool y
+
+comment "Kernel preemption"
+
+source "kernel/Kconfig.preempt"
+
source "mm/Kconfig"
+config HOLES_IN_ZONE
+ def_bool y
+
comment "I/O subsystem configuration"
config MACHCHK_WARNING
config QDIO
tristate "QDIO support"
---help---
- This driver provides the Queued Direct I/O base support for the
- IBM S/390 (G5 and G6) and eServer zSeries (z800, z890, z900 and z990).
+ This driver provides the Queued Direct I/O base support for
+ IBM mainframes.
For details please refer to the documentation provided by IBM at
<http://www10.software.ibm.com/developerworks/opensource/linux390>
If unsure, say Y.
-config QDIO_PERF_STATS
- bool "Performance statistics in /proc"
- depends on QDIO
- help
- Say Y here to get performance statistics in /proc/qdio_perf
-
- If unsure, say N.
-
config QDIO_DEBUG
bool "Extended debugging information"
depends on QDIO
help
- Say Y here to get extended debugging output in /proc/s390dbf/qdio...
+ Say Y here to get extended debugging output in
+ /sys/kernel/debug/s390dbf/qdio...
Warning: this option reduces the performance of the QDIO module.
If unsure, say N.
comment "Misc"
-config PREEMPT
- bool "Preemptible Kernel"
- help
- This option reduces the latency of the kernel when reacting to
- real-time or interactive events by allowing a low priority process to
- be preempted even if it is in kernel mode executing a system call.
- This allows applications to run more reliably even when the system is
- under load.
-
- Say N if you are unsure.
-
config IPL
bool "Builtin IPL record support"
help
Select this option, if you want to share the text segment of the
Linux kernel between different VM guests. This reduces memory
usage with lots of guests but greatly increases kernel size.
+ Also if a kernel was IPL'ed from a shared segment the kexec system
+ call will not work.
You should only select this option if you know what you are
doing and want to exploit this feature.
config APPLDATA_MEM
tristate "Monitor memory management statistics"
- depends on APPLDATA_BASE
+ depends on APPLDATA_BASE && VM_EVENT_COUNTERS
help
This provides memory management related data to the Linux - VM Monitor
Stream, like paging/swapping rate, memory utilisation, etc.
This can also be compiled as a module, which will be called
appldata_net_sum.o.
+source kernel/Kconfig.hz
+
config NO_IDLE_HZ
bool "No HZ timer ticks in idle"
help
The HZ timer is switched off in idle by default. That means the
HZ timer is already disabled at boot time.
+config S390_HYPFS_FS
+ bool "s390 hypervisor file system support"
+ select SYS_HYPERVISOR
+ default y
+ help
+ This is a virtual file system intended to provide accounting
+ information in an s390 hypervisor environment.
+
config KEXEC
- bool "kexec system call (EXPERIMENTAL)"
- depends on EXPERIMENTAL
+ bool "kexec system call"
help
kexec is a system call that implements the ability to shutdown your
current kernel, and to start another kernel. It is like a reboot
but is independent of hardware/microcode support.
+config ZFCPDUMP
+ tristate "zfcpdump support"
+ select SMP
+ default n
+ help
+ Select this option if you want to build an zfcpdump enabled kernel.
+ Refer to "Documentation/s390/zfcpdump.txt" for more details on this.
+
endmenu
source "net/Kconfig"
config PCMCIA
- bool
- default n
-
-source "drivers/base/Kconfig"
+ def_bool n
-source "drivers/scsi/Kconfig"
+config CCW
+ def_bool y
-source "drivers/s390/Kconfig"
-
-source "drivers/net/Kconfig"
+source "drivers/Kconfig"
source "fs/Kconfig"
+menu "Instrumentation Support"
+
source "arch/s390/oprofile/Kconfig"
+config KPROBES
+ bool "Kprobes (EXPERIMENTAL)"
+ depends on EXPERIMENTAL && MODULES
+ help
+ Kprobes allows you to trap at almost any kernel address and
+ execute a callback function. register_kprobe() establishes
+ a probepoint and specifies the callback. Kprobes is useful
+ for kernel debugging, non-intrusive instrumentation and testing.
+ If in doubt, say "N".
+
+endmenu
+
source "arch/s390/Kconfig.debug"
source "security/Kconfig"
Code Review / linux-2.6.git / blobdiff