mainmenu "Linux/PowerPC Kernel Configuration"
+config WORD_SIZE
+ int
+ default 32
+
config MMU
bool
default y
-config UID16
- bool
-
config GENERIC_HARDIRQS
bool
default y
bool
default y
-config GENERIC_CALIBRATE_DELAY
+config ARCH_HAS_ILOG2_U32
+ bool
+ default y
+
+config ARCH_HAS_ILOG2_U64
+ bool
+ default n
+
+config GENERIC_HWEIGHT
bool
default y
-config HAVE_DEC_LOCK
+config GENERIC_CALIBRATE_DELAY
bool
default y
bool
default y
+config GENERIC_FIND_NEXT_BIT
+ bool
+ default y
+
config SCHED_NO_NO_OMIT_FRAME_POINTER
bool
default y
+config ARCH_MAY_HAVE_PC_FDC
+ bool
+ default y
+
+config GENERIC_BUG
+ bool
+ default y
+ depends on BUG
+
source "init/Kconfig"
menu "Processor"
default 6xx
config 6xx
- bool "6xx/7xx/74xx/52xx/82xx/83xx"
+ bool "6xx/7xx/74xx/52xx/82xx"
select PPC_FPU
help
There are four types of PowerPC chips supported. The more common
- types (601, 603, 604, 740, 750, 7400), the Motorola embedded
- versions (821, 823, 850, 855, 860, 52xx, 82xx, 83xx), the IBM embedded
- versions (403 and 405) and the high end 64 bit Power processors
- (POWER 3, POWER4, and IBM 970 also known as G5)
+ types (601, 603, 604, 740, 750, 7400), the older Freescale
+ (formerly Motorola) embedded versions (821, 823, 850, 855, 860,
+ 52xx, 82xx), the IBM embedded versions (403 and 405) and
+ the Book E embedded processors from IBM (44x) and Freescale (85xx).
+ For support for 64-bit processors, set ARCH=powerpc.
Unless you are building a kernel for one of the embedded processor
- systems, 64 bit IBM RS/6000 or an Apple G5, choose 6xx.
- Note that the kernel runs in 32-bit mode even on 64-bit chips.
- Also note that because the 52xx, 82xx, & 83xx family has a 603e core,
- specific support for that chipset is asked later on.
+ systems, choose 6xx.
+ Also note that because the 52xx, 82xx family have a 603e
+ core, specific support for that chipset is asked later on.
config 40x
bool "40x"
+ select PPC_DCR_NATIVE
config 44x
bool "44x"
-
-config POWER3
- select PPC_FPU
- bool "POWER3"
-
-config POWER4
- select PPC_FPU
- bool "POWER4 and 970 (G5)"
+ select PPC_DCR_NATIVE
config 8xx
- depends on BROKEN
bool "8xx"
-
-config E200
- bool "e200"
-
-config E500
- bool "e500"
+ select PPC_LIB_RHEAP
endchoice
config PPC_FPU
bool
-config BOOKE
+config PPC_DCR_NATIVE
bool
- depends on E200 || E500
- default y
+ default n
-config FSL_BOOKE
+config PPC_DCR
bool
- depends on E200 || E500
+ depends on PPC_DCR_NATIVE
default y
config PTE_64BIT
bool
- depends on 44x || E500
+ depends on 44x
default y if 44x
- default y if E500 && PHYS_64BIT
config PHYS_64BIT
- bool 'Large physical address support' if E500
- depends on 44x || E500
+ bool
+ depends on 44x
default y if 44x
---help---
This option enables kernel support for larger than 32-bit physical
config ALTIVEC
bool "AltiVec Support"
- depends on 6xx || POWER4
- depends on !8260 && !83xx
+ depends on 6xx
+ depends on !8260
---help---
This option enables kernel support for the Altivec extensions to the
PowerPC processor. The kernel currently supports saving and restoring
If in doubt, say Y here.
-config SPE
- bool "SPE Support"
- depends on E200 || E500
- ---help---
- This option enables kernel support for the Signal Processing
- Extensions (SPE) to the PowerPC processor. The kernel currently
- supports saving and restoring SPE registers, and turning on the
- 'spe enable' bit so user processes can execute SPE instructions.
-
- This option is only useful if you have a processor that supports
- SPE (e500, otherwise known as 85xx series), but does not have any
- effect on a non-spe cpu (it does, however add code to the kernel).
-
- If in doubt, say Y here.
-
config TAU
bool "Thermal Management Support"
- depends on 6xx && !8260 && !83xx
+ depends on 6xx && !8260
help
G3 and G4 processors have an on-chip temperature sensor called the
'Thermal Assist Unit (TAU)', which, in theory, can measure the on-die
config MATH_EMULATION
bool "Math emulation"
- depends on 4xx || 8xx || E200 || E500
+ depends on 4xx || 8xx
---help---
Some PowerPC chips designed for embedded applications do not have
a floating-point unit and therefore do not implement the
help
kexec is a system call that implements the ability to shutdown your
current kernel, and to start another kernel. It is like a reboot
- but it is indepedent of the system firmware. And like a reboot
+ but it is independent of the system firmware. And like a reboot
you can start any kernel with it, not just Linux.
- The name comes from the similiarity to the exec system call.
+ The name comes from the similarity to the exec system call.
It is an ongoing process to be certain the hardware in a machine
is properly shutdown, so do not be surprised if this code does not
source "drivers/cpufreq/Kconfig"
-config CPU_FREQ_PMAC
- bool "Support for Apple PowerBooks"
- depends on CPU_FREQ && ADB_PMU
- select CPU_FREQ_TABLE
- help
- This adds support for frequency switching on Apple PowerBooks,
- this currently includes some models of iBook & Titanium
- PowerBook.
-
config PPC601_SYNC_FIX
bool "Workarounds for PPC601 bugs"
- depends on 6xx && (PPC_PREP || PPC_PMAC)
+ depends on 6xx && PPC_PREP
help
Some versions of the PPC601 (the first PowerPC chip) have bugs which
mean that extra synchronization instructions are required near
If in doubt, say Y here.
source arch/ppc/platforms/4xx/Kconfig
-source arch/ppc/platforms/85xx/Kconfig
-
-config PPC64BRIDGE
- bool
- depends on POWER3 || POWER4
- default y
config PPC_STD_MMU
bool
- depends on 6xx || POWER3 || POWER4
+ depends on 6xx
default y
config NOT_COHERENT_CACHE
bool
- depends on 4xx || 8xx || E200
+ depends on 4xx || 8xx
default y
endmenu
End of life: end 2000 ?
URL: see TQM850L
- SPD823TS:
- MPC823 based board used in the "Tele Server" product
- Manufacturer: Speech Design, <http://www.speech-design.de/>
- Date of Release: Mid 2000 (?)
- End of life: -
- URL: <http://www.speech-design.de/>
- select "English", then "Teleteam Solutions", then "TeleServer"
-
IVMS8:
MPC860 based board used in the "Integrated Voice Mail System",
Small Version (8 voice channels)
End of life: -
URL: <http://www.speech-design.de/>
- SM850:
- Service Module (based on TQM850L)
- Manufacturer: Dependable Computer Systems, <http://www.decomsys.com/>
- Date of Release: end 2000 (?)
- End of life: mid 2001 (?)
- URL: <http://www.tz-mikroelektronik.de/ServiceModule/index.html>
-
HERMES:
Hermes-Pro ISDN/LAN router with integrated 8 x hub
Manufacturer: Multidata Gesellschaft fur Datentechnik und Informatik
config FPS850L
bool "FPS850L"
-config SPD823TS
- bool "SPD823TS"
- help
- Say Y here to support the Speech Design 823 Tele-Server from Speech
- Design, released in 2000. The manufacturer's website is at
- <http://www.speech-design.de/>.
-
config IVMS8
bool "IVMS8"
help
from Speech Design, released March 2001. The manufacturer's website
is at <http://www.speech-design.de/>.
-config SM850
- bool "SM850"
- help
- Say Y here to support the Service Module 850 from Dependable
- Computer Systems, an SBC based on the TQM850L module by TQ
- Components. This board is no longer in production. The
- manufacturer's website is at <http://www.decomsys.com/>.
-
config HERMES_PRO
bool "HERMES"
endchoice
+menu "Freescale Ethernet driver platform-specific options"
+ depends on FS_ENET
+
+ config MPC8xx_SECOND_ETH
+ bool "Second Ethernet channel"
+ depends on (MPC885ADS || MPC86XADS)
+ default y
+ help
+ This enables support for second Ethernet on MPC885ADS and MPC86xADS boards.
+ The latter will use SCC1, for 885ADS you can select it below.
+
+ choice
+ prompt "Second Ethernet channel"
+ depends on MPC8xx_SECOND_ETH
+ default MPC8xx_SECOND_ETH_FEC2
+
+ config MPC8xx_SECOND_ETH_FEC2
+ bool "FEC2"
+ depends on MPC885ADS
+ help
+ Enable FEC2 to serve as 2-nd Ethernet channel. Note that SMC2
+ (often 2-nd UART) will not work if this is enabled.
+
+ config MPC8xx_SECOND_ETH_SCC1
+ bool "SCC1"
+ depends on MPC86XADS
+ select MPC8xx_SCC_ENET_FIXED
+ help
+ Enable SCC1 to serve as 2-nd Ethernet channel. Note that SMC1
+ (often 1-nd UART) will not work if this is enabled.
+
+ config MPC8xx_SECOND_ETH_SCC3
+ bool "SCC3"
+ depends on MPC885ADS
+ help
+ Enable SCC3 to serve as 2-nd Ethernet channel. Note that SMC1
+ (often 1-nd UART) will not work if this is enabled.
+
+ endchoice
+
+ config MPC8xx_SCC_ENET_FIXED
+ depends on MPC8xx_SECOND_ETH_SCC
+ default n
+ bool "Use fixed MII-less mode for SCC Ethernet"
+
+endmenu
+
choice
prompt "Machine Type"
- depends on 6xx || POWER3 || POWER4
- default PPC_MULTIPLATFORM
+ depends on 6xx
+ default PPC_PREP
---help---
Linux currently supports several different kinds of PowerPC-based
machines: Apple Power Macintoshes and clones (such as the Motorola
Platform) machines (including all of the recent IBM RS/6000 and
pSeries machines), and several embedded PowerPC systems containing
4xx, 6xx, 7xx, 8xx, 74xx, and 82xx processors. Currently, the
- default option is to build a kernel which works on the first three.
-
- Select CHRP/PowerMac/PReP if configuring for an IBM RS/6000 or
- pSeries machine, a Power Macintosh (including iMacs, iBooks and
- Powerbooks), or a PReP machine.
-
- Select Gemini if configuring for a Synergy Microsystems' Gemini
- series Single Board Computer. More information is available at:
- <http://www.synergymicro.com/PressRel/97_10_15.html>.
+ default option is to build a kernel which works on PReP.
- Select APUS if configuring for a PowerUP Amiga. More information is
- available at: <http://linux-apus.sourceforge.net/>.
+ Note that support for Apple and CHRP machines is now only available
+ with ARCH=powerpc, and has been removed from this menu. If you
+ wish to build a kernel for an Apple or CHRP machine, exit this
+ configuration process and re-run it with ARCH=powerpc.
-config PPC_MULTIPLATFORM
- bool "CHRP/PowerMac/PReP"
+ Select PReP if configuring for a PReP machine.
-config APUS
- bool "Amiga-APUS"
- help
- Select APUS if configuring for a PowerUP Amiga.
- More information is available at:
- <http://linux-apus.sourceforge.net/>.
+config PPC_PREP
+ bool "PReP"
config KATANA
bool "Artesyn-Katana"
help
Select CPCI690 if configuring a Force CPCI690 cPCI board.
-config PCORE
- bool "Force-PowerCore"
-
config POWERPMC250
bool "Force-PowerPMC250"
config SPRUCE
bool "IBM-Spruce"
+ select PPC_INDIRECT_PCI
config HDPU
bool "Sky-HDPU"
Select HDPU if configuring a Sky Computers Compute Blade.
config HDPU_FEATURES
- depends HDPU
+ depends on HDPU
tristate "HDPU-Features"
help
Select to enable HDPU enhanced features.
config LOPEC
bool "Motorola-LoPEC"
-
-config MCPN765
- bool "Motorola-MCPN765"
+ select PPC_I8259
config MVME5100
bool "Motorola-MVME5100"
+ select PPC_INDIRECT_PCI
config PPLUS
bool "Motorola-PowerPlus"
+ select PPC_I8259
+ select PPC_INDIRECT_PCI
config PRPMC750
bool "Motorola-PrPMC750"
+ select PPC_INDIRECT_PCI
config PRPMC800
bool "Motorola-PrPMC800"
+ select PPC_INDIRECT_PCI
config SANDPOINT
bool "Motorola-Sandpoint"
+ select PPC_I8259
help
Select SANDPOINT if configuring for a Motorola Sandpoint X3
(any flavor).
config RADSTONE_PPC7D
bool "Radstone Technology PPC7D board"
-
-config ADIR
- bool "SBS-Adirondack"
-
-config K2
- bool "SBS-K2"
+ select PPC_I8259
config PAL4
bool "SBS-Palomar4"
-config GEMINI
- bool "Synergy-Gemini"
- help
- Select Gemini if configuring for a Synergy Microsystems' Gemini
- series Single Board Computer. More information is available at:
- <http://www.synergymicro.com/PressRel/97_10_15.html>.
-
config EST8260
bool "EST8260"
---help---
much but it's only been tested on this board version. I think this
board is also known as IceCube.
-config MPC834x_SYS
- bool "Freescale MPC834x SYS"
+config LITE5200B
+ bool "Freescale LITE5200B"
+ depends on LITE5200
help
- This option enables support for the MPC 834x SYS evaluation board.
+ Support for the LITE5200B dev board for the MPC5200 from Freescale.
+ This is the new board with 2 PCI slots.
+config EV64360
+ bool "Marvell-EV64360BP"
+ help
+ Select EV64360 if configuring a Marvell EV64360BP Evaluation
+ platform.
endchoice
config PQ2ADS
config TQM8xxL
bool
- depends on 8xx && (TQM823L || TQM850L || FPS850L || TQM855L || TQM860L || SM850)
+ depends on 8xx && (TQM823L || TQM850L || FPS850L || TQM855L || TQM860L)
default y
config EMBEDDEDBOOT
The MPC8272 CPM has a different internal dpram setup than other CPM2
devices
-config 83xx
- bool
- default y if MPC834x_SYS
-
-config MPC834x
+config CPM1
bool
- default y if MPC834x_SYS
+ depends on 8xx
+ default y
+ help
+ The CPM1 (Communications Processor Module) is a coprocessor on
+ embedded CPUs made by Motorola. Selecting this option means that
+ you wish to build a kernel for a machine with a CPM1 coprocessor
+ on it (8xx, 827x, 8560).
config CPM2
bool
depends on 8260 || MPC8560 || MPC8555
+ select PPC_LIB_RHEAP
default y
help
The CPM2 (Communications Processor Module) is a coprocessor on
you wish to build a kernel for a machine with a CPM2 coprocessor
on it (826x, 827x, 8560).
-config PPC_CHRP
- bool
- depends on PPC_MULTIPLATFORM
- default y
-
-config PPC_PMAC
- bool
- depends on PPC_MULTIPLATFORM
- default y
-
-config PPC_PMAC64
+config PPC_GEN550
bool
- depends on PPC_PMAC && POWER4
+ depends on SANDPOINT || SPRUCE || PPLUS || \
+ PRPMC750 || PRPMC800 || LOPEC || \
+ (EV64260 && !SERIAL_MPSC) || CHESTNUT || RADSTONE_PPC7D
default y
-config PPC_PREP
+config FORCE
bool
- depends on PPC_MULTIPLATFORM
+ depends on 6xx && POWERPMC250
default y
-config PPC_OF
+config GT64260
bool
- depends on PPC_PMAC || PPC_CHRP
+ depends on EV64260 || CPCI690
default y
-config PPC_GEN550
+config MV64360 # Really MV64360 & MV64460
bool
- depends on SANDPOINT || MCPN765 || SPRUCE || PPLUS || PCORE || \
- PRPMC750 || K2 || PRPMC800 || LOPEC || \
- (EV64260 && !SERIAL_MPSC) || CHESTNUT || RADSTONE_PPC7D || \
- 83xx
+ depends on CHESTNUT || KATANA || RADSTONE_PPC7D || HDPU || EV64360
default y
-config FORCE
+config MV64X60
bool
- depends on 6xx && (PCORE || POWERPMC250)
+ depends on (GT64260 || MV64360)
+ select PPC_INDIRECT_PCI
default y
-config GT64260
+config MV643XX_ETH_0
bool
- depends on EV64260 || CPCI690
+ depends on MV643XX_ETH && (KATANA || RADSTONE_PPC7D || EV64360 || HDPU)
default y
-config MV64360 # Really MV64360 & MV64460
+config MV643XX_ETH_1
bool
- depends on CHESTNUT || KATANA || RADSTONE_PPC7D || HDPU
+ depends on MV643XX_ETH && (KATANA || RADSTONE_PPC7D || EV64360)
default y
-config MV64X60
+config MV643XX_ETH_2
bool
- depends on (GT64260 || MV64360)
+ depends on MV643XX_ETH && (KATANA || RADSTONE_PPC7D || EV64360)
default y
menu "Set bridge options"
config MPC10X_BRIDGE
bool
- depends on PCORE || POWERPMC250 || LOPEC || SANDPOINT
+ depends on POWERPMC250 || LOPEC || SANDPOINT
+ select PPC_INDIRECT_PCI
default y
config MPC10X_OPENPIC
bool "Enable MPC10x store gathering"
depends on MPC10X_BRIDGE
-config CPC710_DATA_GATHERING
- bool "Enable CPC710 data gathering"
- depends on K2
+config SANDPOINT_ENABLE_UART1
+ bool "Enable DUART mode on Sandpoint"
+ depends on SANDPOINT
+ help
+ If this option is enabled then the MPC824x processor will run
+ in DUART mode instead of UART mode.
config HARRIER_STORE_GATHERING
bool "Enable Harrier store gathering"
config MVME5100_IPMC761_PRESENT
bool "MVME5100 configured with an IPMC761"
depends on MVME5100
+ select PPC_I8259
config SPRUCE_BAUD_33M
bool "Spruce baud clock support"
default y if PPC_PREP
config SMP
+ depends on PPC_STD_MMU
bool "Symmetric multi-processing support"
---help---
This enables support for systems with more than one CPU. If you have
config IRQ_ALL_CPUS
bool "Distribute interrupts on all CPUs by default"
- depends on SMP
+ depends on SMP && !MV64360
help
This option gives the kernel permission to distribute IRQs across
multiple CPUs. Saying N here will route all IRQs to the first
config HIGHMEM
bool "High memory support"
+config ARCH_POPULATES_NODE_MAP
+ def_bool y
+
source kernel/Kconfig.hz
source kernel/Kconfig.preempt
source "mm/Kconfig"
source "fs/Kconfig.binfmt"
-config PROC_DEVICETREE
- bool "Support for Open Firmware device tree in /proc"
- depends on PPC_OF && PROC_FS
- help
- This option adds a device-tree directory under /proc which contains
- an image of the device tree that the kernel copies from Open
- Firmware. If unsure, say Y here.
-
config PREP_RESIDUAL
bool "Support for PReP Residual Data"
depends on PPC_PREP
some command-line options at build time by entering them here. In
most cases you will need to specify the root device here.
-config AMIGA
- bool
- depends on APUS
- default y
- help
- This option enables support for the Amiga series of computers.
-
-config ZORRO
- bool
- depends on APUS
- default y
- help
- This enables support for the Zorro bus in the Amiga. If you have
- expansion cards in your Amiga that conform to the Amiga
- AutoConfig(tm) specification, say Y, otherwise N. Note that even
- expansion cards that do not fit in the Zorro slots but fit in e.g.
- the CPU slot may fall in this category, so you have to say Y to let
- Linux use these.
-
-config ABSTRACT_CONSOLE
- bool
- depends on APUS
- default y
-
-config APUS_FAST_EXCEPT
- bool
- depends on APUS
- default y
-
-config AMIGA_PCMCIA
- bool "Amiga 1200/600 PCMCIA support"
- depends on APUS && EXPERIMENTAL
- help
- Include support in the kernel for pcmcia on Amiga 1200 and Amiga
- 600. If you intend to use pcmcia cards say Y; otherwise say N.
-
-config AMIGA_BUILTIN_SERIAL
- tristate "Amiga builtin serial support"
- depends on APUS
- help
- If you want to use your Amiga's built-in serial port in Linux,
- answer Y.
-
- To compile this driver as a module, choose M here.
-
-config GVPIOEXT
- tristate "GVP IO-Extender support"
- depends on APUS
- help
- If you want to use a GVP IO-Extender serial card in Linux, say Y.
- Otherwise, say N.
-
-config GVPIOEXT_LP
- tristate "GVP IO-Extender parallel printer support"
- depends on GVPIOEXT
- help
- Say Y to enable driving a printer from the parallel port on your
- GVP IO-Extender card, N otherwise.
-
-config GVPIOEXT_PLIP
- tristate "GVP IO-Extender PLIP support"
- depends on GVPIOEXT
- help
- Say Y to enable doing IP over the parallel port on your GVP
- IO-Extender card, N otherwise.
-
-config MULTIFACE_III_TTY
- tristate "Multiface Card III serial support"
- depends on APUS
- help
- If you want to use a Multiface III card's serial port in Linux,
- answer Y.
-
- To compile this driver as a module, choose M here.
-
-config A2232
- tristate "Commodore A2232 serial support (EXPERIMENTAL)"
- depends on EXPERIMENTAL && APUS
- ---help---
- This option supports the 2232 7-port serial card shipped with the
- Amiga 2000 and other Zorro-bus machines, dating from 1989. At
- a max of 19,200 bps, the ports are served by a 6551 ACIA UART chip
- each, plus a 8520 CIA, and a master 6502 CPU and buffer as well. The
- ports were connected with 8 pin DIN connectors on the card bracket,
- for which 8 pin to DB25 adapters were supplied. The card also had
- jumpers internally to toggle various pinning configurations.
-
- This driver can be built as a module; but then "generic_serial"
- will also be built as a module. This has to be loaded before
- "ser_a2232". If you want to do this, answer M here.
-
-config WHIPPET_SERIAL
- tristate "Hisoft Whippet PCMCIA serial support"
- depends on AMIGA_PCMCIA
- help
- HiSoft has a web page at <http://www.hisoft.co.uk/>, but there
- is no listing for the Whippet in their Amiga section.
-
-config APNE
- tristate "PCMCIA NE2000 support"
- depends on AMIGA_PCMCIA
- help
- If you have a PCMCIA NE2000 compatible adapter, say Y. Otherwise,
- say N.
-
- To compile this driver as a module, choose M here: the
- module will be called apne.
-
-config SERIAL_CONSOLE
- bool "Support for serial port console"
- depends on APUS && (AMIGA_BUILTIN_SERIAL=y || GVPIOEXT=y || MULTIFACE_III_TTY=y)
-
-config HEARTBEAT
- bool "Use power LED as a heartbeat"
- depends on APUS
- help
- Use the power-on LED on your machine as a load meter. The exact
- behavior is platform-dependent, but normally the flash frequency is
- a hyperbolic function of the 5-minute load average.
-
-config PROC_HARDWARE
- bool "/proc/hardware support"
- depends on APUS
-
-source "drivers/zorro/Kconfig"
-
+if BROKEN
source kernel/power/Kconfig
+endif
config SECCOMP
bool "Enable seccomp to safely compute untrusted bytecode"
config ISA
bool "Support for ISA-bus hardware"
- depends on PPC_PREP || PPC_CHRP
+ depends on PPC_PREP
help
Find out whether you have ISA slots on your motherboard. ISA is the
name of a bus system, i.e. the way the CPU talks to the other stuff
have an IBM RS/6000 or pSeries machine or a PReP machine, say Y. If
you have an embedded board, consult your board documentation.
+config ZONE_DMA
+ bool
+ default y
+
config GENERIC_ISA_DMA
bool
- depends on POWER3 || POWER4 || 6xx && !CPM2
+ depends on 6xx && !CPM2
default y
+config PPC_I8259
+ bool
+ default y if PPC_PREP
+ default n
+
+config PPC_INDIRECT_PCI
+ bool
+ depends on PCI
+ default y if 40x || 44x || PPC_PREP
+ default n
+
config EISA
bool
help
bool
config PCI
- bool "PCI support" if 40x || CPM2 || 83xx || 85xx || PPC_MPC52xx
- default y if !40x && !CPM2 && !8xx && !APUS && !83xx && !85xx
- default PCI_PERMEDIA if !4xx && !CPM2 && !8xx && APUS
+ bool "PCI support" if 40x || CPM2 || PPC_MPC52xx
+ default y if !40x && !CPM2 && !8xx
default PCI_QSPAN if !4xx && !CPM2 && 8xx
help
Find out whether your system includes a PCI bus. PCI is the name of
infrastructure code to support PCI bus devices.
config PCI_DOMAINS
- bool
- default PCI
+ def_bool PCI
+
+config PCI_SYSCALL
+ def_bool PCI
config PCI_QSPAN
bool "QSpan PCI"
depends on !4xx && !CPM2 && 8xx
+ select PPC_I8259
help
Say Y here if you have a system based on a Motorola 8xx-series
embedded processor with a QSPAN PCI interface, otherwise say N.
config PCI_8260
bool
depends on PCI && 8260
+ select PPC_INDIRECT_PCI
default y
config 8260_PCI9
- bool " Enable workaround for MPC826x erratum PCI 9"
+ bool "Enable workaround for MPC826x erratum PCI 9"
depends on PCI_8260 && !ADS8272
default y
choice
- prompt " IDMA channel for PCI 9 workaround"
+ prompt "IDMA channel for PCI 9 workaround"
depends on 8260_PCI9
config 8260_PCI9_IDMA1
endchoice
-config PCI_PERMEDIA
- bool "PCI for Permedia2"
- depends on !4xx && !8xx && APUS
-
source "drivers/pci/Kconfig"
source "drivers/pcmcia/Kconfig"
+config RAPIDIO
+ bool "RapidIO support" if MPC8540 || MPC8560
+ help
+ If you say Y here, the kernel will include drivers and
+ infrastructure code to support RapidIO interconnect devices.
+
+source "drivers/rapidio/Kconfig"
+
endmenu
menu "Advanced setup"
depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE
help
This option allows you to set the base virtual address
- of the the consistent memory pool. This pool of virtual
+ of the consistent memory pool. This pool of virtual
memory is used to make consistent memory allocations.
config CONSISTENT_START
bool "Set custom consistent memory pool size"
depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE
help
- This option allows you to set the size of the the
+ This option allows you to set the size of the
consistent memory pool. This pool of virtual memory
is used to make consistent memory allocations.
config BOOT_LOAD_BOOL
bool "Set the boot link/load address"
- depends on ADVANCED_OPTIONS && !PPC_MULTIPLATFORM
+ depends on ADVANCED_OPTIONS && !PPC_PREP
help
This option allows you to set the initial load address of the zImage
or zImage.initrd file. This can be useful if you are on a board
config PIN_TLB
bool "Pinned Kernel TLBs (860 ONLY)"
depends on ADVANCED_OPTIONS && 8xx
+
+config PPC_LIB_RHEAP
+ bool
+
endmenu
source "net/Kconfig"
source "lib/Kconfig"
-source "arch/ppc/oprofile/Kconfig"
+source "kernel/Kconfig.instrumentation"
source "arch/ppc/Kconfig.debug"