* Copyright (C) 2007-2009 PetaLogix
* Copyright (C) 2006 Atmark Techno, Inc.
*
+ * MMU code derived from arch/ppc/kernel/head_4xx.S:
+ * Copyright (c) 1995-1996 Gary Thomas <gdt@linuxppc.org>
+ * Initial PowerPC version.
+ * Copyright (c) 1996 Cort Dougan <cort@cs.nmt.edu>
+ * Rewritten for PReP
+ * Copyright (c) 1996 Paul Mackerras <paulus@cs.anu.edu.au>
+ * Low-level exception handers, MMU support, and rewrite.
+ * Copyright (c) 1997 Dan Malek <dmalek@jlc.net>
+ * PowerPC 8xx modifications.
+ * Copyright (c) 1998-1999 TiVo, Inc.
+ * PowerPC 403GCX modifications.
+ * Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
+ * PowerPC 403GCX/405GP modifications.
+ * Copyright 2000 MontaVista Software Inc.
+ * PPC405 modifications
+ * PowerPC 403GCX/405GP modifications.
+ * Author: MontaVista Software, Inc.
+ * frank_rowand@mvista.com or source@mvista.com
+ * debbie_chu@mvista.com
+ *
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
#include <asm/thread_info.h>
#include <asm/page.h>
+#ifdef CONFIG_MMU
+#include <asm/setup.h> /* COMMAND_LINE_SIZE */
+#include <asm/mmu.h>
+#include <asm/processor.h>
+
+.data
+.global empty_zero_page
+.align 12
+empty_zero_page:
+ .space 4096
+.global swapper_pg_dir
+swapper_pg_dir:
+ .space 4096
+
+#endif /* CONFIG_MMU */
+
.text
ENTRY(_start)
mfs r1, rmsr
addik r3, r3, -4 /* descrement loop */
no_fdt_arg:
+#ifdef CONFIG_MMU
+
+#ifndef CONFIG_CMDLINE_BOOL
+/*
+ * handling command line
+ * copy command line to __init_end. There is space for storing command line.
+ */
+ or r6, r0, r0 /* incremment */
+ ori r4, r0, __init_end /* load address of command line */
+ tophys(r4,r4) /* convert to phys address */
+ ori r3, r0, COMMAND_LINE_SIZE - 1 /* number of loops */
+_copy_command_line:
+ lbu r7, r5, r6 /* r7=r5+r6 - r5 contain pointer to command line */
+ sb r7, r4, r6 /* addr[r4+r6]= r7*/
+ addik r6, r6, 1 /* increment counting */
+ bgtid r3, _copy_command_line /* loop for all entries */
+ addik r3, r3, -1 /* descrement loop */
+ addik r5, r4, 0 /* add new space for command line */
+ tovirt(r5,r5)
+#endif /* CONFIG_CMDLINE_BOOL */
+
+#ifdef NOT_COMPILE
+/* save bram context */
+ or r6, r0, r0 /* incremment */
+ ori r4, r0, TOPHYS(_bram_load_start) /* save bram context */
+ ori r3, r0, (LMB_SIZE - 4)
+_copy_bram:
+ lw r7, r0, r6 /* r7 = r0 + r6 */
+ sw r7, r4, r6 /* addr[r4 + r6] = r7*/
+ addik r6, r6, 4 /* increment counting */
+ bgtid r3, _copy_bram /* loop for all entries */
+ addik r3, r3, -4 /* descrement loop */
+#endif
+ /* We have to turn on the MMU right away. */
+
+ /*
+ * Set up the initial MMU state so we can do the first level of
+ * kernel initialization. This maps the first 16 MBytes of memory 1:1
+ * virtual to physical.
+ */
+ nop
+ addik r3, r0, 63 /* Invalidate all TLB entries */
+_invalidate:
+ mts rtlbx, r3
+ mts rtlbhi, r0 /* flush: ensure V is clear */
+ bgtid r3, _invalidate /* loop for all entries */
+ addik r3, r3, -1
+ /* sync */
+
+ /*
+ * We should still be executing code at physical address area
+ * RAM_BASEADDR at this point. However, kernel code is at
+ * a virtual address. So, set up a TLB mapping to cover this once
+ * translation is enabled.
+ */
+
+ addik r3,r0, CONFIG_KERNEL_START /* Load the kernel virtual address */
+ tophys(r4,r3) /* Load the kernel physical address */
+
+ mts rpid,r0 /* Load the kernel PID */
+ nop
+ bri 4
+
+ /*
+ * Configure and load two entries into TLB slots 0 and 1.
+ * In case we are pinning TLBs, these are reserved in by the
+ * other TLB functions. If not reserving, then it doesn't
+ * matter where they are loaded.
+ */
+ andi r4,r4,0xfffffc00 /* Mask off the real page number */
+ ori r4,r4,(TLB_WR | TLB_EX) /* Set the write and execute bits */
+
+ andi r3,r3,0xfffffc00 /* Mask off the effective page number */
+ ori r3,r3,(TLB_VALID | TLB_PAGESZ(PAGESZ_16M))
+
+ mts rtlbx,r0 /* TLB slow 0 */
+
+ mts rtlblo,r4 /* Load the data portion of the entry */
+ mts rtlbhi,r3 /* Load the tag portion of the entry */
+
+ addik r4, r4, 0x01000000 /* Map next 16 M entries */
+ addik r3, r3, 0x01000000
+
+ ori r6,r0,1 /* TLB slot 1 */
+ mts rtlbx,r6
+
+ mts rtlblo,r4 /* Load the data portion of the entry */
+ mts rtlbhi,r3 /* Load the tag portion of the entry */
+
+ /*
+ * Load a TLB entry for LMB, since we need access to
+ * the exception vectors, using a 4k real==virtual mapping.
+ */
+ ori r6,r0,3 /* TLB slot 3 */
+ mts rtlbx,r6
+
+ ori r4,r0,(TLB_WR | TLB_EX)
+ ori r3,r0,(TLB_VALID | TLB_PAGESZ(PAGESZ_4K))
+
+ mts rtlblo,r4 /* Load the data portion of the entry */
+ mts rtlbhi,r3 /* Load the tag portion of the entry */
+
+ /*
+ * We now have the lower 16 Meg of RAM mapped into TLB entries, and the
+ * caches ready to work.
+ */
+turn_on_mmu:
+ ori r15,r0,start_here
+ ori r4,r0,MSR_KERNEL_VMS
+ mts rmsr,r4
+ nop
+ rted r15,0 /* enables MMU */
+ nop
+
+start_here:
+#endif /* CONFIG_MMU */
+
/* Initialize small data anchors */
la r13, r0, _KERNEL_SDA_BASE_
la r2, r0, _KERNEL_SDA2_BASE_
brald r15, r8
nop
+#ifndef CONFIG_MMU
la r15, r0, machine_halt
braid start_kernel
nop
+#else
+ /*
+ * Initialize the MMU.
+ */
+ bralid r15, mmu_init
+ nop
+
+ /* Go back to running unmapped so we can load up new values
+ * and change to using our exception vectors.
+ * On the MicroBlaze, all we invalidate the used TLB entries to clear
+ * the old 16M byte TLB mappings.
+ */
+ ori r15,r0,TOPHYS(kernel_load_context)
+ ori r4,r0,MSR_KERNEL
+ mts rmsr,r4
+ nop
+ bri 4
+ rted r15,0
+ nop
+
+ /* Load up the kernel context */
+kernel_load_context:
+ # Keep entry 0 and 1 valid. Entry 3 mapped to LMB can go away.
+ ori r5,r0,3
+ mts rtlbx,r5
+ nop
+ mts rtlbhi,r0
+ nop
+ addi r15, r0, machine_halt
+ ori r17, r0, start_kernel
+ ori r4, r0, MSR_KERNEL_VMS
+ mts rmsr, r4
+ nop
+ rted r17, 0 /* enable MMU and jump to start_kernel */
+ nop
+#endif /* CONFIG_MMU */
Code Review / linux-2.6.git / blobdiff