#include <linux/bootmem.h>
#include <linux/efi.h>
#include <linux/mm.h>
+#include <linux/nmi.h>
#include <linux/swap.h>
#include <asm/meminit.h>
printk(KERN_INFO "Mem-info:\n");
show_free_areas();
- printk(KERN_INFO "Free swap: %6ldkB\n",
- nr_swap_pages<<(PAGE_SHIFT-10));
printk(KERN_INFO "Node memory in pages:\n");
for_each_online_pgdat(pgdat) {
unsigned long present;
present = pgdat->node_present_pages;
for(i = 0; i < pgdat->node_spanned_pages; i++) {
struct page *page;
+ if (unlikely(i % MAX_ORDER_NR_PAGES == 0))
+ touch_nmi_watchdog();
if (pfn_valid(pgdat->node_start_pfn + i))
page = pfn_to_page(pgdat->node_start_pfn + i);
else {
* bootmap_start. This address must be page-aligned.
*/
static int __init
-find_bootmap_location (unsigned long start, unsigned long end, void *arg)
+find_bootmap_location (u64 start, u64 end, void *arg)
{
- unsigned long needed = *(unsigned long *)arg;
- unsigned long range_start, range_end, free_start;
+ u64 needed = *(unsigned long *)arg;
+ u64 range_start, range_end, free_start;
int i;
#if IGNORE_PFN0
return 0;
}
+#ifdef CONFIG_SMP
+static void *cpu_data;
+/**
+ * per_cpu_init - setup per-cpu variables
+ *
+ * Allocate and setup per-cpu data areas.
+ */
+void * __cpuinit
+per_cpu_init (void)
+{
+ static bool first_time = true;
+ void *cpu0_data = __cpu0_per_cpu;
+ unsigned int cpu;
+
+ if (!first_time)
+ goto skip;
+ first_time = false;
+
+ /*
+ * get_free_pages() cannot be used before cpu_init() done.
+ * BSP allocates PERCPU_PAGE_SIZE bytes for all possible CPUs
+ * to avoid that AP calls get_zeroed_page().
+ */
+ for_each_possible_cpu(cpu) {
+ void *src = cpu == 0 ? cpu0_data : __phys_per_cpu_start;
+
+ memcpy(cpu_data, src, __per_cpu_end - __per_cpu_start);
+ __per_cpu_offset[cpu] = (char *)cpu_data - __per_cpu_start;
+ per_cpu(local_per_cpu_offset, cpu) = __per_cpu_offset[cpu];
+
+ /*
+ * percpu area for cpu0 is moved from the __init area
+ * which is setup by head.S and used till this point.
+ * Update ar.k3. This move is ensures that percpu
+ * area for cpu0 is on the correct node and its
+ * virtual address isn't insanely far from other
+ * percpu areas which is important for congruent
+ * percpu allocator.
+ */
+ if (cpu == 0)
+ ia64_set_kr(IA64_KR_PER_CPU_DATA, __pa(cpu_data) -
+ (unsigned long)__per_cpu_start);
+
+ cpu_data += PERCPU_PAGE_SIZE;
+ }
+skip:
+ return __per_cpu_start + __per_cpu_offset[smp_processor_id()];
+}
+
+static inline void
+alloc_per_cpu_data(void)
+{
+ cpu_data = __alloc_bootmem(PERCPU_PAGE_SIZE * num_possible_cpus(),
+ PERCPU_PAGE_SIZE, __pa(MAX_DMA_ADDRESS));
+}
+
+/**
+ * setup_per_cpu_areas - setup percpu areas
+ *
+ * Arch code has already allocated and initialized percpu areas. All
+ * this function has to do is to teach the determined layout to the
+ * dynamic percpu allocator, which happens to be more complex than
+ * creating whole new ones using helpers.
+ */
+void __init
+setup_per_cpu_areas(void)
+{
+ struct pcpu_alloc_info *ai;
+ struct pcpu_group_info *gi;
+ unsigned int cpu;
+ ssize_t static_size, reserved_size, dyn_size;
+ int rc;
+
+ ai = pcpu_alloc_alloc_info(1, num_possible_cpus());
+ if (!ai)
+ panic("failed to allocate pcpu_alloc_info");
+ gi = &ai->groups[0];
+
+ /* units are assigned consecutively to possible cpus */
+ for_each_possible_cpu(cpu)
+ gi->cpu_map[gi->nr_units++] = cpu;
+
+ /* set parameters */
+ static_size = __per_cpu_end - __per_cpu_start;
+ reserved_size = PERCPU_MODULE_RESERVE;
+ dyn_size = PERCPU_PAGE_SIZE - static_size - reserved_size;
+ if (dyn_size < 0)
+ panic("percpu area overflow static=%zd reserved=%zd\n",
+ static_size, reserved_size);
+
+ ai->static_size = static_size;
+ ai->reserved_size = reserved_size;
+ ai->dyn_size = dyn_size;
+ ai->unit_size = PERCPU_PAGE_SIZE;
+ ai->atom_size = PAGE_SIZE;
+ ai->alloc_size = PERCPU_PAGE_SIZE;
+
+ rc = pcpu_setup_first_chunk(ai, __per_cpu_start + __per_cpu_offset[0]);
+ if (rc)
+ panic("failed to setup percpu area (err=%d)", rc);
+
+ pcpu_free_alloc_info(ai);
+}
+#else
+#define alloc_per_cpu_data() do { } while (0)
+#endif /* CONFIG_SMP */
+
/**
* find_memory - setup memory map
*
/* Free all available memory, then mark bootmem-map as being in use. */
efi_memmap_walk(filter_rsvd_memory, free_bootmem);
- reserve_bootmem(bootmap_start, bootmap_size);
+ reserve_bootmem(bootmap_start, bootmap_size, BOOTMEM_DEFAULT);
find_initrd();
+ alloc_per_cpu_data();
}
-#ifdef CONFIG_SMP
-/**
- * per_cpu_init - setup per-cpu variables
- *
- * Allocate and setup per-cpu data areas.
- */
-void * __cpuinit
-per_cpu_init (void)
-{
- void *cpu_data;
- int cpu;
- static int first_time=1;
-
- /*
- * get_free_pages() cannot be used before cpu_init() done. BSP
- * allocates "NR_CPUS" pages for all CPUs to avoid that AP calls
- * get_zeroed_page().
- */
- if (first_time) {
- first_time=0;
- cpu_data = __alloc_bootmem(PERCPU_PAGE_SIZE * NR_CPUS,
- PERCPU_PAGE_SIZE, __pa(MAX_DMA_ADDRESS));
- for (cpu = 0; cpu < NR_CPUS; cpu++) {
- memcpy(cpu_data, __phys_per_cpu_start, __per_cpu_end - __per_cpu_start);
- __per_cpu_offset[cpu] = (char *) cpu_data - __per_cpu_start;
- cpu_data += PERCPU_PAGE_SIZE;
- per_cpu(local_per_cpu_offset, cpu) = __per_cpu_offset[cpu];
- }
- }
- return __per_cpu_start + __per_cpu_offset[smp_processor_id()];
-}
-#endif /* CONFIG_SMP */
-
-static int
-count_pages (u64 start, u64 end, void *arg)
+static int count_pages(u64 start, u64 end, void *arg)
{
unsigned long *count = arg;
max_zone_pfns[ZONE_NORMAL] = max_low_pfn;
#ifdef CONFIG_VIRTUAL_MEM_MAP
- efi_memmap_walk(register_active_ranges, NULL);
+ efi_memmap_walk(filter_memory, register_active_ranges);
efi_memmap_walk(find_largest_hole, (u64 *)&max_gap);
if (max_gap < LARGE_GAP) {
vmem_map = (struct page *) 0;
map_size = PAGE_ALIGN(ALIGN(max_low_pfn, MAX_ORDER_NR_PAGES) *
sizeof(struct page));
- vmalloc_end -= map_size;
- vmem_map = (struct page *) vmalloc_end;
+ VMALLOC_END -= map_size;
+ vmem_map = (struct page *) VMALLOC_END;
efi_memmap_walk(create_mem_map_page_table, NULL);
/*