-#
-# For a description of the syntax of this configuration file,
-# see Documentation/kbuild/kconfig-language.txt.
-#
-
-mainmenu "IA-64 Linux Kernel Configuration"
-
source "init/Kconfig"
+source "kernel/Kconfig.freezer"
+
menu "Processor type and features"
config IA64
select ACPI if (!IA64_HP_SIM)
select PM if (!IA64_HP_SIM)
select ARCH_SUPPORTS_MSI
+ select HAVE_UNSTABLE_SCHED_CLOCK
select HAVE_IDE
select HAVE_OPROFILE
select HAVE_KPROBES
select HAVE_KRETPROBES
+ select HAVE_FTRACE_MCOUNT_RECORD
+ select HAVE_DYNAMIC_FTRACE if (!ITANIUM)
+ select HAVE_FUNCTION_TRACER
select HAVE_DMA_ATTRS
select HAVE_KVM
+ select HAVE_ARCH_TRACEHOOK
+ select HAVE_DMA_API_DEBUG
default y
help
The Itanium Processor Family is Intel's 64-bit successor to
bool
default y
+config ARCH_DMA_ADDR_T_64BIT
+ def_bool y
+
+config NEED_DMA_MAP_STATE
+ def_bool y
+
+config NEED_SG_DMA_LENGTH
+ def_bool y
+
config SWIOTLB
bool
-config IOMMU_HELPER
- bool
+config STACKTRACE_SUPPORT
+ def_bool y
config GENERIC_LOCKBREAK
- bool
- default y
- depends on SMP && PREEMPT
+ def_bool n
config RWSEM_XCHGADD_ALGORITHM
bool
default y
-config ARCH_HAS_ILOG2_U32
- bool
- default n
-
-config ARCH_HAS_ILOG2_U64
- bool
- default n
-
config HUGETLB_PAGE_SIZE_VARIABLE
bool
depends on HUGETLB_PAGE
bool
default y
-config GENERIC_TIME
- bool
- default y
-
config GENERIC_TIME_VSYSCALL
bool
default y
bool
default y
-config SCHED_NO_NO_OMIT_FRAME_POINTER
+config SCHED_OMIT_FRAME_POINTER
bool
default y
bool
select GENERIC_ALLOCATOR
+config ARCH_USES_PG_UNCACHED
+ def_bool y
+ depends on IA64_UNCACHED_ALLOCATOR
+
config AUDIT_ARCH
bool
default y
+menuconfig PARAVIRT_GUEST
+ bool "Paravirtualized guest support"
+ help
+ Say Y here to get to see options related to running Linux under
+ various hypervisors. This option alone does not add any kernel code.
+
+ If you say N, all options in this submenu will be skipped and disabled.
+
+if PARAVIRT_GUEST
+
+config PARAVIRT
+ bool "Enable paravirtualization code"
+ depends on PARAVIRT_GUEST
+ default y
+ bool
+ default y
+ help
+ This changes the kernel so it can modify itself when it is run
+ under a hypervisor, potentially improving performance significantly
+ over full virtualization. However, when run without a hypervisor
+ the kernel is theoretically slower and slightly larger.
+
+
+source "arch/ia64/xen/Kconfig"
+
+endif
+
choice
prompt "System type"
default IA64_GENERIC
select NUMA
select ACPI_NUMA
select SWIOTLB
+ select PCI_MSI
+ select DMAR
help
This selects the system type of your hardware. A "generic" kernel
will run on any supported IA-64 system. However, if you configure
generic For any supported IA-64 system
DIG-compliant For DIG ("Developer's Interface Guide") compliant systems
+ DIG+Intel+IOMMU For DIG systems with Intel IOMMU
HP-zx1/sx1000 For HP systems
HP-zx1/sx1000+swiotlb For HP systems with (broken) DMA-constrained devices.
SGI-SN2 For SGI Altix systems
SGI-UV For SGI UV systems
Ski-simulator For the HP simulator <http://www.hpl.hp.com/research/linux/ski/>
+ Xen-domU For xen domU system
If you don't know what to do, choose "generic".
bool "DIG-compliant"
select SWIOTLB
+config IA64_DIG_VTD
+ bool "DIG+Intel+IOMMU"
+ select DMAR
+ select PCI_MSI
+
config IA64_HP_ZX1
bool "HP-zx1/sx1000"
help
to select this option. If in doubt, select ia64 generic support
instead.
-config IA64_SGI_UV`
- bool "SGI-UV`"
+config IA64_SGI_UV
+ bool "SGI-UV"
select NUMA
select ACPI_NUMA
select SWIOTLB
bool "Ski-simulator"
select SWIOTLB
+config IA64_XEN_GUEST
+ bool "Xen guest"
+ select SWIOTLB
+ depends on XEN
+ help
+ Build a kernel that runs on Xen guest domain. At this moment only
+ 16KB page size in supported.
+
endchoice
choice
If you don't know what to do here, say N.
config NR_CPUS
- int "Maximum number of CPUs (2-1024)"
- range 2 1024
+ int "Maximum number of CPUs (2-4096)"
+ range 2 4096
depends on SMP
- default "1024"
+ default "4096"
help
You should set this to the number of CPUs in your system, but
keep in mind that a kernel compiled for, e.g., 2 CPUs will boot but
default y if VIRTUAL_MEM_MAP
config HAVE_ARCH_EARLY_PFN_TO_NID
- def_bool y
- depends on NEED_MULTIPLE_NODES
+ def_bool NUMA && SPARSEMEM
config HAVE_ARCH_NODEDATA_EXTENSION
def_bool y
depends on NUMA
-config IA32_SUPPORT
- bool "Support for Linux/x86 binaries"
- help
- IA-64 processors can execute IA-32 (X86) instructions. By
- saying Y here, the kernel will include IA-32 system call
- emulation support which makes it possible to transparently
- run IA-32 Linux binaries on an IA-64 Linux system.
- If in doubt, say Y.
+config USE_PERCPU_NUMA_NODE_ID
+ def_bool y
+ depends on NUMA
-config COMPAT
- bool
- depends on IA32_SUPPORT
- default y
+config HAVE_MEMORYLESS_NODES
+ def_bool NUMA
-config COMPAT_FOR_U64_ALIGNMENT
- def_bool COMPAT
+config ARCH_PROC_KCORE_TEXT
+ def_bool y
+ depends on PROC_KCORE
config IA64_MCA_RECOVERY
tristate "MCA recovery from errors other than TLB."
endmenu
-menu "Power management and ACPI"
+menu "Power management and ACPI options"
source "kernel/power/Kconfig"
source "drivers/pcmcia/Kconfig"
+config DMAR
+ bool "Support for DMA Remapping Devices (EXPERIMENTAL)"
+ depends on IA64_GENERIC && ACPI && EXPERIMENTAL
+ help
+ DMA remapping (DMAR) devices support enables independent address
+ translations for Direct Memory Access (DMA) from devices.
+ These DMA remapping devices are reported via ACPI tables
+ and include PCI device scope covered by these DMA
+ remapping devices.
+
+config DMAR_DEFAULT_ON
+ def_bool y
+ prompt "Enable DMA Remapping Devices by default"
+ depends on DMAR
+ help
+ Selecting this option will enable a DMAR device at boot time if
+ one is found. If this option is not selected, DMAR support can
+ be enabled by passing intel_iommu=on to the kernel. It is
+ recommended you say N here while the DMAR code remains
+ experimental.
+
endmenu
endif
source "drivers/Kconfig"
+source "arch/ia64/hp/sim/Kconfig"
+
config MSPEC
tristate "Memory special operations driver"
depends on IA64
source "fs/Kconfig"
+source "arch/ia64/Kconfig.debug"
+
+source "security/Kconfig"
+
+source "crypto/Kconfig"
+
source "arch/ia64/kvm/Kconfig"
source "lib/Kconfig"
# Use the generic interrupt handling code in kernel/irq/:
#
config GENERIC_HARDIRQS
- bool
- default y
+ def_bool y
+
+config GENERIC_HARDIRQS_NO__DO_IRQ
+ def_bool y
config GENERIC_IRQ_PROBE
bool
config IOMMU_HELPER
def_bool (IA64_HP_ZX1 || IA64_HP_ZX1_SWIOTLB || IA64_GENERIC || SWIOTLB)
-source "arch/ia64/hp/sim/Kconfig"
-
-source "arch/ia64/Kconfig.debug"
-
-source "security/Kconfig"
-
-source "crypto/Kconfig"
+config IOMMU_API
+ def_bool (DMAR)
Code Review / linux-2.6.git / blobdiff