[PATCH] at91_serial -> atmel_serial: Platform device name
[linux-2.6.git] / arch / avr32 / mach-at32ap / at32ap7000.c
index 37982b6..842e7be 100644 (file)
@@ -523,33 +523,33 @@ void __init at32_add_system_devices(void)
  *  USART
  * -------------------------------------------------------------------- */
 
-static struct resource usart0_resource[] = {
+static struct resource atmel_usart0_resource[] = {
        PBMEM(0xffe00c00),
        IRQ(7),
 };
-DEFINE_DEV(usart, 0);
-DEV_CLK(usart, usart0, pba, 4);
+DEFINE_DEV(atmel_usart, 0);
+DEV_CLK(usart, atmel_usart0, pba, 4);
 
-static struct resource usart1_resource[] = {
+static struct resource atmel_usart1_resource[] = {
        PBMEM(0xffe01000),
        IRQ(7),
 };
-DEFINE_DEV(usart, 1);
-DEV_CLK(usart, usart1, pba, 4);
+DEFINE_DEV(atmel_usart, 1);
+DEV_CLK(usart, atmel_usart1, pba, 4);
 
-static struct resource usart2_resource[] = {
+static struct resource atmel_usart2_resource[] = {
        PBMEM(0xffe01400),
        IRQ(8),
 };
-DEFINE_DEV(usart, 2);
-DEV_CLK(usart, usart2, pba, 5);
+DEFINE_DEV(atmel_usart, 2);
+DEV_CLK(usart, atmel_usart2, pba, 5);
 
-static struct resource usart3_resource[] = {
+static struct resource atmel_usart3_resource[] = {
        PBMEM(0xffe01800),
        IRQ(9),
 };
-DEFINE_DEV(usart, 3);
-DEV_CLK(usart, usart3, pba, 6);
+DEFINE_DEV(atmel_usart, 3);
+DEV_CLK(usart, atmel_usart3, pba, 6);
 
 static inline void configure_usart0_pins(void)
 {
@@ -581,19 +581,19 @@ static struct platform_device *setup_usart(unsigned int id)
 
        switch (id) {
        case 0:
-               pdev = &usart0_device;
+               pdev = &atmel_usart0_device;
                configure_usart0_pins();
                break;
        case 1:
-               pdev = &usart1_device;
+               pdev = &atmel_usart1_device;
                configure_usart1_pins();
                break;
        case 2:
-               pdev = &usart2_device;
+               pdev = &atmel_usart2_device;
                configure_usart2_pins();
                break;
        case 3:
-               pdev = &usart3_device;
+               pdev = &atmel_usart3_device;
                configure_usart3_pins();
                break;
        default:
@@ -813,10 +813,10 @@ struct clk *at32_clock_list[] = {
        &pio1_mck,
        &pio2_mck,
        &pio3_mck,
-       &usart0_usart,
-       &usart1_usart,
-       &usart2_usart,
-       &usart3_usart,
+       &atmel_usart0_usart,
+       &atmel_usart1_usart,
+       &atmel_usart2_usart,
+       &atmel_usart3_usart,
        &macb0_hclk,
        &macb0_pclk,
        &spi0_mck,