APM Advanced Power Management support is enabled.
AX25 Appropriate AX.25 support is enabled.
CD Appropriate CD support is enabled.
- DEVFS devfs support is enabled.
DRM Direct Rendering Management support is enabled.
EDD BIOS Enhanced Disk Drive Services (EDD) is enabled
EFI EFI Partitioning (GPT) is enabled
MTD MTD support is enabled.
NET Appropriate network support is enabled.
NUMA NUMA support is enabled.
+ GENERIC_TIME The generic timeofday code is enabled.
NFS Appropriate NFS support is enabled.
OSS OSS sound support is enabled.
PARIDE The ParIDE subsystem is enabled.
it will appear as a kernel argument readable via /proc/cmdline by programs
running once the system is up.
+The number of kernel parameters is not limited, but the length of the
+complete command line (parameters including spaces etc.) is limited to
+a fixed number of characters. This limit depends on the architecture
+and is between 256 and 4096 characters. It is defined in the file
+./include/asm/setup.h as COMMAND_LINE_SIZE.
+
+
53c7xx= [HW,SCSI] Amiga SCSI controllers
See header of drivers/scsi/53c7xx.c.
See also Documentation/scsi/ncr53c7xx.txt.
acpi_skip_timer_override [HW,ACPI]
Recognize and ignore IRQ0/pin2 Interrupt Override.
For broken nForce2 BIOS resulting in XT-PIC timer.
+ acpi_use_timer_override [HW,ACPI}
+ Use timer override. For some broken Nvidia NF5 boards
+ that require a timer override, but don't have
+ HPET
acpi_dbg_layer= [HW,ACPI]
Format: <int>
override platform specific driver.
See also Documentation/acpi-hotkey.txt.
+ acpi_pm_good [IA-32,X86-64]
+ Override the pmtimer bug detection: force the kernel
+ to assume that this machine's pmtimer latches its value
+ and always returns good values.
+
enable_timer_pin_1 [i386,x86-64]
Enable PIN 1 of APIC timer
Can be useful to work around chipset bugs
autotest [IA64]
- awe= [HW,OSS] AWE32/SB32/AWE64 wave table synth
- Format: <io>,<memsize>,<isapnp>
-
aztcd= [HW,CD] Aztech CD268 CDROM driver
Format: <io>,0x79 (?)
Value can be changed at runtime via
/selinux/checkreqprot.
- clock= [BUGS=IA-32,HW] gettimeofday timesource override.
- Forces specified timesource (if avaliable) to be used
- when calculating gettimeofday(). If specicified
- timesource is not avalible, it defaults to PIT.
+ clock= [BUGS=IA-32, HW] gettimeofday clocksource override.
+ [Deprecated]
+ Forces specified clocksource (if available) to be used
+ when calculating gettimeofday(). If specified
+ clocksource is not available, it defaults to PIT.
Format: { pit | tsc | cyclone | pmtmr }
disable_8254_timer
debug [KNL] Enable kernel debugging (events log level).
+ debug_locks_verbose=
+ [KNL] verbose self-tests
+ Format=<0|1>
+ Print debugging info while doing the locking API
+ self-tests.
+ We default to 0 (no extra messages), setting it to
+ 1 will print _a lot_ more information - normally
+ only useful to kernel developers.
+
decnet= [HW,NET]
Format: <area>[,<node>]
See also Documentation/networking/decnet.txt.
- devfs= [DEVFS]
- See Documentation/filesystems/devfs/boot-options.
-
dhash_entries= [KNL]
Set number of hash buckets for dentry cache.
Default value is 0.
Value can be changed at runtime via /selinux/enforce.
- es1370= [HW,OSS]
- Format: <lineout>[,<micbias>]
- See also header of sound/oss/es1370.c.
-
es1371= [HW,OSS]
Format: <spdif>,[<nomix>,[<amplifier>]]
See also header of sound/oss/es1371.c.
eurwdt= [HW,WDT] Eurotech CPU-1220/1410 onboard watchdog.
Format: <io>[,<irq>]
+ failslab=
+ fail_page_alloc=
+ fail_make_request=[KNL]
+ General fault injection mechanism.
+ Format: <interval>,<probability>,<space>,<times>
+ See also /Documentation/fault-injection/.
+
fd_mcs= [HW,SCSI]
See header of drivers/scsi/fd_mcs.c.
floppy= [HW]
See Documentation/floppy.txt.
- ftape= [HW] Floppy Tape subsystem debugging options.
- See Documentation/ftape.txt.
-
gamecon.map[2|3]=
[HW,JOY] Multisystem joystick and NES/SNES/PSX pad
support via parallel port (up to 5 devices per port)
gscd= [HW,CD]
Format: <io>
- gt96100eth= [NET] MIPS GT96100 Advanced Communication Controller
-
- gus= [HW,OSS]
- Format: <io>,<irq>,<dma>,<dma16>
-
gvp11= [HW,SCSI]
hashdist= [KNL,NUMA] Large hashes allocated during boot
hugepages= [HW,IA-32,IA-64] Maximal number of HugeTLB pages.
- noirqbalance [IA-32,SMP,KNL] Disable kernel irq balancing
-
i8042.direct [HW] Put keyboard port into non-translated mode
- i8042.dumbkbd [HW] Pretend that controlled can only read data from
- keyboard and can not control its state
+ i8042.dumbkbd [HW] Pretend that controller can only read data from
+ keyboard and cannot control its state
(Don't attempt to blink the leds)
i8042.noaux [HW] Don't check for auxiliary (== mouse) port
i8042.nokbd [HW] Don't check/create keyboard port
idle= [HW]
Format: idle=poll or idle=halt
+ ignore_loglevel [KNL]
+ Ignore loglevel setting - this will print /all/
+ kernel messages to the console. Useful for debugging.
+
ihash_entries= [KNL]
Set number of hash buckets for inode cache.
ips= [HW,SCSI] Adaptec / IBM ServeRAID controller
See header of drivers/scsi/ips.c.
+ ports= [IP_VS_FTP] IPVS ftp helper module
+ Default is 21.
+ Up to 8 (IP_VS_APP_MAX_PORTS) ports
+ may be specified.
+ Format: <port>,<port>....
+
irqfixup [HW]
When an interrupt is not handled search all handlers
for it. Intended to get systems with badly broken
Format: <RDP>,<reset>,<pci_scan>,<verbosity>
isolcpus= [KNL,SMP] Isolate CPUs from the general scheduler.
- Format: <cpu number>,...,<cpu number>
+ Format:
+ <cpu number>,...,<cpu number>
+ or
+ <cpu number>-<cpu number> (must be a positive range in ascending order)
+ or a mixture
+ <cpu number>,...,<cpu number>-<cpu number>
This option can be used to specify one or more CPUs
to isolate from the general SMP balancing and scheduling
algorithms. The only way to move a process onto or off
(machvec) in a generic kernel.
Example: machvec=hpzx1_swiotlb
- mad16= [HW,OSS] Format:
- <io>,<irq>,<dma>,<dma16>,<mpu_io>,<mpu_irq>,<joystick>
-
- maui= [HW,OSS]
- Format: <io>,<irq>
-
max_loop= [LOOP] Maximum number of loopback devices that can
be mounted
Format: <1-256>
emulation library even if a 387 maths coprocessor
is present.
+ noaliencache [MM, NUMA] Disables the allcoation of alien caches in
+ the slab allocator. Saves per-node memory, but will
+ impact performance on real NUMA hardware.
+
noalign [KNL,ARM]
noapic [SMP,APIC] Tells the kernel to not make use of any
nocache [ARM]
+ nodelayacct [KNL] Disable per-task delay accounting
+
nodisconnect [HW,SCSI,M68K] Disables SCSI disconnects.
noexec [IA-64]
in certain environments such as networked servers or
real-time systems.
+ noirqbalance [IA-32,SMP,KNL] Disable kernel irq balancing
+
noirqdebug [IA-32] Disables the code which attempts to detect and
disable unhandled interrupt sources.
+ no_timer_check [IA-32,X86_64,APIC] Disables the code which tests for
+ broken timer IRQ sources.
+
noisapnp [ISAPNP] Disables ISA PnP code.
noinitrd [RAM] Tells the kernel not to load any configured
opl3= [HW,OSS]
Format: <io>
- opl3sa= [HW,OSS]
- Format: <io>,<irq>,<dma>,<dma2>,<mpu_io>,<mpu_irq>
-
opl3sa2= [HW,OSS] Format:
<io>,<irq>,<dma>,<dma2>,<mss_io>,<mpu_io>,<ymode>,<loopback>[,<isapnp>,<multiple]
bootloader. This is currently used on
IXP2000 systems where the bus has to be
configured a certain way for adjunct CPUs.
+ noearly [X86] Don't do any early type 1 scanning.
+ This might help on some broken boards which
+ machine check when some devices' config space
+ is read. But various workarounds are disabled
+ and some IOMMU drivers will not work.
+ bfsort Sort PCI devices into breadth-first order.
+ This sorting is done to get a device
+ order compatible with older (<= 2.4) kernels.
+ nobfsort Don't sort PCI devices into breadth-first order.
pcmv= [HW,PCMCIA] BadgePAD 4
Param: "schedule" - profile schedule points.
Param: <number> - step/bucket size as a power of 2 for
statistical time based profiling.
+ Param: "sleep" - profile D-state sleeping (millisecs)
processor.max_cstate= [HW,ACPI]
Limit processor to maximum C-state
pt. [PARIDE]
See Documentation/paride.txt.
- quiet= [KNL] Disable log messages
+ quiet [KNL] Disable most log messages
r128= [HW,DRM]
rcu.qlowmark= [KNL,BOOT] Set threshold of queued
RCU callbacks below which batch limiting is re-enabled.
- rcu.rsinterval= [KNL,BOOT,SMP] Set the number of additional
- RCU callbacks to queued before forcing reschedule
- on all cpus.
-
rdinit= [KNL]
Format: <full_path>
Run specified binary instead of /init from the ramdisk,
reboot= [BUGS=IA-32,BUGS=ARM,BUGS=IA-64] Rebooting mode
Format: <reboot_mode>[,<reboot_mode2>[,...]]
- See arch/*/kernel/reboot.c.
+ See arch/*/kernel/reboot.c or arch/*/kernel/process.c
reserve= [KNL,BUGS] Force the kernel to ignore some iomem area
+ reservetop= [IA-32]
+ Format: nn[KMG]
+ Reserves a hole at the top of the kernel virtual
+ address space.
+
+ reset_devices [KNL] Force drivers to reset the underlying device
+ during initialization.
+
resume= [SWSUSP]
Specify the partition device for software suspend
+ resume_offset= [SWSUSP]
+ Specify the offset from the beginning of the partition
+ given by "resume=" at which the swap header is located,
+ in <PAGE_SIZE> units (needed only for swap files).
+ See Documentation/power/swsusp-and-swap-files.txt
+
+ retain_initrd [RAM] Keep initrd memory after extraction
+
rhash_entries= [KNL,NET]
Set number of hash buckets for route cache
scsi_logging= [SCSI]
+ scsi_mod.scan= [SCSI] sync (default) scans SCSI busses as they are
+ discovered. async scans them in kernel threads,
+ allowing boot to proceed. none ignores them, expecting
+ user space to do the scan.
+
selinux [SELINUX] Disable or enable SELinux at boot time.
Format: { "0" | "1" }
See security/selinux/Kconfig help text.
sg_def_reserved_size= [SCSI]
- sgalaxy= [HW,OSS]
- Format: <io>,<irq>,<dma>,<dma2>,<sgbase>
-
shapers= [NET]
Maximal number of shapers.
snd-ymfpci= [HW,ALSA]
- sonicvibes= [HW,OSS]
- Format: <reverb>
-
sonycd535= [HW,CD]
Format: <io>[,<irq>]
sym53c416= [HW,SCSI]
See header of drivers/scsi/sym53c416.c.
+ sysrq_always_enabled
+ [KNL]
+ Ignore sysrq setting - this boot parameter will
+ neutralize any effect of /proc/sys/kernel/sysrq.
+ Useful for debugging.
+
t128= [HW,SCSI]
See header of drivers/scsi/t128.c.
time Show timing data prefixed to each printk message line
+ clocksource= [GENERIC_TIME] Override the default clocksource
+ Override the default clocksource and use the clocksource
+ with the name specified.
+
tipar.timeout= [HW,PPT]
Set communications timeout in tenths of a second
(default 15).
uart6850= [HW,OSS]
Format: <io>,<irq>
+ uhci-hcd.ignore_oc=
+ [USB] Ignore overcurrent events (default N).
+ Some badly-designed motherboards generate lots of
+ bogus events, for ports that aren't wired to
+ anything. Set this parameter to avoid log spamming.
+ Note that genuine overcurrent events won't be
+ reported either.
+
usbhid.mousepoll=
[USBHID] The interval which mice are to be polled at.
+ vdso= [IA-32]
+ vdso=1: enable VDSO (default)
+ vdso=0: disable VDSO mapping
+
video= [FB] Frame buffer configuration
See Documentation/fb/modedb.txt.
decrease the size and leave more room for directly
mapped kernel RAM.
- vmhalt= [KNL,S390]
+ vmhalt= [KNL,S390] Perform z/VM CP command after system halt.
+ Format: <command>
+
+ vmpanic= [KNL,S390] Perform z/VM CP command after kernel panic.
+ Format: <command>
- vmpoff= [KNL,S390]
+ vmpoff= [KNL,S390] Perform z/VM CP command after power off.
+ Format: <command>
waveartist= [HW,OSS]
Format: <io>,<irq>,<dma>,<dma2>
norandmaps Don't use address space randomization
Equivalent to echo 0 > /proc/sys/kernel/randomize_va_space
+ unwind_debug=N N > 0 will enable dwarf2 unwinder debugging
+ This is useful to get more information why
+ you got a "dwarf2 unwinder stuck"
______________________________________________________________________