/* This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. * * Copyright (C) 1999-2007 by Helge Deller * Copyright 1999 SuSE GmbH (Philipp Rumpf) * Copyright 1999 Philipp Rumpf (prumpf@tux.org) * Copyright 2000 Hewlett Packard (Paul Bame, bame@puffin.external.hp.com) * Copyright (C) 2001 Grant Grundler (Hewlett Packard) * Copyright (C) 2004 Kyle McMartin * * Initial Version 04-23-1999 by Helge Deller */ #include #include #include #include #include #include #include .level LEVEL __INITDATA ENTRY(boot_args) .word 0 /* arg0 */ .word 0 /* arg1 */ .word 0 /* arg2 */ .word 0 /* arg3 */ END(boot_args) __HEAD .align 4 .import init_thread_union,data .import fault_vector_20,code /* IVA parisc 2.0 32 bit */ #ifndef CONFIG_64BIT .import fault_vector_11,code /* IVA parisc 1.1 32 bit */ .import $global$ /* forward declaration */ #endif /*!CONFIG_64BIT*/ .export _stext,data /* Kernel want it this way! */ _stext: ENTRY(stext) .proc .callinfo /* Make sure sr4-sr7 are set to zero for the kernel address space */ mtsp %r0,%sr4 mtsp %r0,%sr5 mtsp %r0,%sr6 mtsp %r0,%sr7 /* Clear BSS (shouldn't the boot loader do this?) */ .import __bss_start,data .import __bss_stop,data load32 PA(__bss_start),%r3 load32 PA(__bss_stop),%r4 $bss_loop: cmpb,<<,n %r3,%r4,$bss_loop stw,ma %r0,4(%r3) /* Save away the arguments the boot loader passed in (32 bit args) */ load32 PA(boot_args),%r1 stw,ma %arg0,4(%r1) stw,ma %arg1,4(%r1) stw,ma %arg2,4(%r1) stw,ma %arg3,4(%r1) /* Initialize startup VM. Just map first 8/16 MB of memory */ load32 PA(swapper_pg_dir),%r4 mtctl %r4,%cr24 /* Initialize kernel root pointer */ mtctl %r4,%cr25 /* Initialize user root pointer */ #if PT_NLEVELS == 3 /* Set pmd in pgd */ load32 PA(pmd0),%r5 shrd %r5,PxD_VALUE_SHIFT,%r3 ldo (PxD_FLAG_PRESENT+PxD_FLAG_VALID)(%r3),%r3 stw %r3,ASM_PGD_ENTRY*ASM_PGD_ENTRY_SIZE(%r4) ldo ASM_PMD_ENTRY*ASM_PMD_ENTRY_SIZE(%r5),%r4 #else /* 2-level page table, so pmd == pgd */ ldo ASM_PGD_ENTRY*ASM_PGD_ENTRY_SIZE(%r4),%r4 #endif /* Fill in pmd with enough pte directories */ load32 PA(pg0),%r1 SHRREG %r1,PxD_VALUE_SHIFT,%r3 ldo (PxD_FLAG_PRESENT+PxD_FLAG_VALID)(%r3),%r3 ldi ASM_PT_INITIAL,%r1 1: stw %r3,0(%r4) ldo (PAGE_SIZE >> PxD_VALUE_SHIFT)(%r3),%r3 addib,> -1,%r1,1b #if PT_NLEVELS == 3 ldo ASM_PMD_ENTRY_SIZE(%r4),%r4 #else ldo ASM_PGD_ENTRY_SIZE(%r4),%r4 #endif /* Now initialize the PTEs themselves */ ldo 0+_PAGE_KERNEL(%r0),%r3 /* Hardwired 0 phys addr start */ ldi (1<<(KERNEL_INITIAL_ORDER-PAGE_SHIFT)),%r11 /* PFN count */ load32 PA(pg0),%r1 $pgt_fill_loop: STREGM %r3,ASM_PTE_ENTRY_SIZE(%r1) ldo (1< -1,%r11,$pgt_fill_loop nop /* Load the return address...er...crash 'n burn */ copy %r0,%r2 /* And the RFI Target address too */ load32 start_parisc,%r11 /* And the initial task pointer */ load32 init_thread_union,%r6 mtctl %r6,%cr30 /* And the stack pointer too */ ldo THREAD_SZ_ALGN(%r6),%sp #ifdef CONFIG_SMP /* Set the smp rendevous address into page zero. ** It would be safer to do this in init_smp_config() but ** it's just way easier to deal with here because ** of 64-bit function ptrs and the address is local to this file. */ load32 PA(smp_slave_stext),%r10 stw %r10,0x10(%r0) /* MEM_RENDEZ */ stw %r0,0x28(%r0) /* MEM_RENDEZ_HI - assume addr < 4GB */ /* FALLTHROUGH */ .procend /* ** Code Common to both Monarch and Slave processors. ** Entry: ** ** 1.1: ** %r11 must contain RFI target address. ** %r25/%r26 args to pass to target function ** %r2 in case rfi target decides it didn't like something ** ** 2.0w: ** %r3 PDCE_PROC address ** %r11 RFI target address ** ** Caller must init: SR4-7, %sp, %r10, %cr24/25, */ common_stext: .proc .callinfo #else /* Clear PDC entry point - we won't use it */ stw %r0,0x10(%r0) /* MEM_RENDEZ */ stw %r0,0x28(%r0) /* MEM_RENDEZ_HI */ #endif /*CONFIG_SMP*/ #ifdef CONFIG_64BIT tophys_r1 %sp /* Save the rfi target address */ ldd TI_TASK-THREAD_SZ_ALGN(%sp), %r10 tophys_r1 %r10 std %r11, TASK_PT_GR11(%r10) /* Switch to wide mode Superdome doesn't support narrow PDC ** calls. */ 1: mfia %rp /* clear upper part of pcoq */ ldo 2f-1b(%rp),%rp depdi 0,31,32,%rp bv (%rp) ssm PSW_SM_W,%r0 /* Set Wide mode as the "Default" (eg for traps) ** First trap occurs *right* after (or part of) rfi for slave CPUs. ** Someday, palo might not do this for the Monarch either. */ 2: #define MEM_PDC_LO 0x388 #define MEM_PDC_HI 0x35C ldw MEM_PDC_LO(%r0),%r3 ldw MEM_PDC_HI(%r0),%r6 depd %r6, 31, 32, %r3 /* move to upper word */ ldo PDC_PSW(%r0),%arg0 /* 21 */ ldo PDC_PSW_SET_DEFAULTS(%r0),%arg1 /* 2 */ ldo PDC_PSW_WIDE_BIT(%r0),%arg2 /* 2 */ load32 PA(stext_pdc_ret), %rp bv (%r3) copy %r0,%arg3 stext_pdc_ret: /* restore rfi target address*/ ldd TI_TASK-THREAD_SZ_ALGN(%sp), %r10 tophys_r1 %r10 ldd TASK_PT_GR11(%r10), %r11 tovirt_r1 %sp #endif /* PARANOID: clear user scratch/user space SR's */ mtsp %r0,%sr0 mtsp %r0,%sr1 mtsp %r0,%sr2 mtsp %r0,%sr3 /* Initialize Protection Registers */ mtctl %r0,%cr8 mtctl %r0,%cr9 mtctl %r0,%cr12 mtctl %r0,%cr13 /* Initialize the global data pointer */ loadgp /* Set up our interrupt table. HPMCs might not work after this! * * We need to install the correct iva for PA1.1 or PA2.0. The * following short sequence of instructions can determine this * (without being illegal on a PA1.1 machine). */ #ifndef CONFIG_64BIT ldi 32,%r10 mtctl %r10,%cr11 .level 2.0 mfctl,w %cr11,%r10 .level 1.1 comib,<>,n 0,%r10,$is_pa20 ldil L%PA(fault_vector_11),%r10 b $install_iva ldo R%PA(fault_vector_11)(%r10),%r10 $is_pa20: .level LEVEL /* restore 1.1 || 2.0w */ #endif /*!CONFIG_64BIT*/ load32 PA(fault_vector_20),%r10 $install_iva: mtctl %r10,%cr14 b aligned_rfi /* Prepare to RFI! Man all the cannons! */ nop .align 128 aligned_rfi: pcxt_ssm_bug rsm PSW_SM_QUIET,%r0 /* off troublesome PSW bits */ /* Don't need NOPs, have 8 compliant insn before rfi */ mtctl %r0,%cr17 /* Clear IIASQ tail */ mtctl %r0,%cr17 /* Clear IIASQ head */ /* Load RFI target into PC queue */ mtctl %r11,%cr18 /* IIAOQ head */ ldo 4(%r11),%r11 mtctl %r11,%cr18 /* IIAOQ tail */ load32 KERNEL_PSW,%r10 mtctl %r10,%ipsw /* Jump through hyperspace to Virt Mode */ rfi nop .procend #ifdef CONFIG_SMP .import smp_init_current_idle_task,data .import smp_callin,code #ifndef CONFIG_64BIT smp_callin_rtn: .proc .callinfo break 1,1 /* Break if returned from start_secondary */ nop nop .procend #endif /*!CONFIG_64BIT*/ /*************************************************************************** * smp_slave_stext is executed by all non-monarch Processors when the Monarch * pokes the slave CPUs in smp.c:smp_boot_cpus(). * * Once here, registers values are initialized in order to branch to virtual * mode. Once all available/eligible CPUs are in virtual mode, all are * released and start out by executing their own idle task. *****************************************************************************/ smp_slave_stext: .proc .callinfo /* ** Initialize Space registers */ mtsp %r0,%sr4 mtsp %r0,%sr5 mtsp %r0,%sr6 mtsp %r0,%sr7 /* Initialize the SP - monarch sets up smp_init_current_idle_task */ load32 PA(smp_init_current_idle_task),%sp LDREG 0(%sp),%sp /* load task address */ tophys_r1 %sp LDREG TASK_THREAD_INFO(%sp),%sp mtctl %sp,%cr30 /* store in cr30 */ ldo THREAD_SZ_ALGN(%sp),%sp /* point CPU to kernel page tables */ load32 PA(swapper_pg_dir),%r4 mtctl %r4,%cr24 /* Initialize kernel root pointer */ mtctl %r4,%cr25 /* Initialize user root pointer */ #ifdef CONFIG_64BIT /* Setup PDCE_PROC entry */ copy %arg0,%r3 #else /* Load RFI *return* address in case smp_callin bails */ load32 smp_callin_rtn,%r2 #endif /* Load RFI target address. */ load32 smp_callin,%r11 /* ok...common code can handle the rest */ b common_stext nop .procend #endif /* CONFIG_SMP */ ENDPROC(stext) #ifndef CONFIG_64BIT .section .data.read_mostly .align 4 .export $global$,data .type $global$,@object .size $global$,4 $global$: .word 0 #endif /*!CONFIG_64BIT*/