drivers/usb/musb/musb_virthub.c

   1 /*
   2  * MUSB OTG driver virtual root hub support
   3  *
   4  * Copyright 2005 Mentor Graphics Corporation
   5  * Copyright (C) 2005-2006 by Texas Instruments
   6  * Copyright (C) 2006-2007 Nokia Corporation
   7  *
   8  * This program is free software; you can redistribute it and/or
   9  * modify it under the terms of the GNU General Public License
  10  * version 2 as published by the Free Software Foundation.
  11  *
  12  * This program is distributed in the hope that it will be useful, but
  13  * WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  15  * General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program; if not, write to the Free Software
  19  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
  20  * 02110-1301 USA
  21  *
  22  * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
  23  * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
  24  * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
  25  * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
  26  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
  27  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
  28  * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
  29  * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  30  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
  31  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  32  *
  33  */
  34
  35 #include <linux/module.h>
  36 #include <linux/kernel.h>
  37 #include <linux/sched.h>
  38 #include <linux/slab.h>
  39 #include <linux/errno.h>
  40 #include <linux/init.h>
  41 #include <linux/time.h>
  42 #include <linux/timer.h>
  43
  44 #include <asm/unaligned.h>
  45
  46 #include "musb_core.h"
  47
  48
  49 static void musb_port_suspend(struct musb *musb, bool do_suspend)
  50 {
  51         u8              power;
  52         void __iomem    *mbase = musb->mregs;
  53
  54         if (!is_host_active(musb))
  55                 return;
  56
  57         /* NOTE:  this doesn't necessarily put PHY into low power mode,
  58          * turning off its clock; that's a function of PHY integration and
  59          * MUSB_POWER_ENSUSPEND.  PHY may need a clock (sigh) to detect
  60          * SE0 changing to connect (J) or wakeup (K) states.
  61          */
  62         power = musb_readb(mbase, MUSB_POWER);
  63         if (do_suspend) {
  64                 int retries = 10000;
  65
  66                 power &= ~MUSB_POWER_RESUME;
  67                 power |= MUSB_POWER_SUSPENDM;
  68                 musb_writeb(mbase, MUSB_POWER, power);
  69
  70                 /* Needed for OPT A tests */
  71                 power = musb_readb(mbase, MUSB_POWER);
  72                 while (power & MUSB_POWER_SUSPENDM) {
  73                         power = musb_readb(mbase, MUSB_POWER);
  74                         if (retries-- < 1)
  75                                 break;
  76                 }
  77
  78                 DBG(3, "Root port suspended, power %02x\n", power);
  79
  80                 musb->port1_status |= USB_PORT_STAT_SUSPEND;
  81                 switch (musb->xceiv.state) {
  82                 case OTG_STATE_A_HOST:
  83                         musb->xceiv.state = OTG_STATE_A_SUSPEND;
  84                         musb->is_active = is_otg_enabled(musb)
  85                                         && musb->xceiv.host->b_hnp_enable;
  86                         musb_platform_try_idle(musb, 0);
  87                         break;
  88 #ifdef  CONFIG_USB_MUSB_OTG
  89                 case OTG_STATE_B_HOST:
  90                         musb->xceiv.state = OTG_STATE_B_WAIT_ACON;
  91                         musb->is_active = is_otg_enabled(musb)
  92                                         && musb->xceiv.host->b_hnp_enable;
  93                         musb_platform_try_idle(musb, 0);
  94                         break;
  95 #endif
  96                 default:
  97                         DBG(1, "bogus rh suspend? %s\n",
  98                                 otg_state_string(musb));
  99                 }
 100         } else if (power & MUSB_POWER_SUSPENDM) {
 101                 power &= ~MUSB_POWER_SUSPENDM;
 102                 power |= MUSB_POWER_RESUME;
 103                 musb_writeb(mbase, MUSB_POWER, power);
 104
 105                 DBG(3, "Root port resuming, power %02x\n", power);
 106
 107                 /* later, GetPortStatus will stop RESUME signaling */
 108                 musb->port1_status |= MUSB_PORT_STAT_RESUME;
 109                 musb->rh_timer = jiffies + msecs_to_jiffies(20);
 110         }
 111 }
 112
 113 static void musb_port_reset(struct musb *musb, bool do_reset)
 114 {
 115         u8              power;
 116         void __iomem    *mbase = musb->mregs;
 117
 118 #ifdef CONFIG_USB_MUSB_OTG
 119         if (musb->xceiv.state == OTG_STATE_B_IDLE) {
 120                 DBG(2, "HNP: Returning from HNP; no hub reset from b_idle\n");
 121                 musb->port1_status &= ~USB_PORT_STAT_RESET;
 122                 return;
 123         }
 124 #endif
 125
 126         if (!is_host_active(musb))
 127                 return;
 128
 129         /* NOTE:  caller guarantees it will turn off the reset when
 130          * the appropriate amount of time has passed
 131          */
 132         power = musb_readb(mbase, MUSB_POWER);
 133         if (do_reset) {
 134
 135                 /*
 136                  * If RESUME is set, we must make sure it stays minimum 20 ms.
 137                  * Then we must clear RESUME and wait a bit to let musb start
 138                  * generating SOFs. If we don't do this, OPT HS A 6.8 tests
 139                  * fail with "Error! Did not receive an SOF before suspend
 140                  * detected".
 141                  */
 142                 if (power &  MUSB_POWER_RESUME) {
 143                         while (time_before(jiffies, musb->rh_timer))
 144                                 msleep(1);
 145                         musb_writeb(mbase, MUSB_POWER,
 146                                 power & ~MUSB_POWER_RESUME);
 147                         msleep(1);
 148                 }
 149
 150                 musb->ignore_disconnect = true;
 151                 power &= 0xf0;
 152                 musb_writeb(mbase, MUSB_POWER,
 153                                 power | MUSB_POWER_RESET);
 154
 155                 musb->port1_status |= USB_PORT_STAT_RESET;
 156                 musb->port1_status &= ~USB_PORT_STAT_ENABLE;
 157                 musb->rh_timer = jiffies + msecs_to_jiffies(50);
 158         } else {
 159                 DBG(4, "root port reset stopped\n");
 160                 musb_writeb(mbase, MUSB_POWER,
 161                                 power & ~MUSB_POWER_RESET);
 162
 163                 musb->ignore_disconnect = false;
 164
 165                 power = musb_readb(mbase, MUSB_POWER);
 166                 if (power & MUSB_POWER_HSMODE) {
 167                         DBG(4, "high-speed device connected\n");
 168                         musb->port1_status |= USB_PORT_STAT_HIGH_SPEED;
 169                 }
 170
 171                 musb->port1_status &= ~USB_PORT_STAT_RESET;
 172                 musb->port1_status |= USB_PORT_STAT_ENABLE
 173                                         | (USB_PORT_STAT_C_RESET << 16)
 174                                         | (USB_PORT_STAT_C_ENABLE << 16);
 175                 usb_hcd_poll_rh_status(musb_to_hcd(musb));
 176
 177                 musb->vbuserr_retry = VBUSERR_RETRY_COUNT;
 178         }
 179 }
 180
 181 void musb_root_disconnect(struct musb *musb)
 182 {
 183         musb->port1_status = (1 << USB_PORT_FEAT_POWER)
 184                         | (1 << USB_PORT_FEAT_C_CONNECTION);
 185
 186         usb_hcd_poll_rh_status(musb_to_hcd(musb));
 187         musb->is_active = 0;
 188
 189         switch (musb->xceiv.state) {
 190         case OTG_STATE_A_HOST:
 191         case OTG_STATE_A_SUSPEND:
 192                 musb->xceiv.state = OTG_STATE_A_WAIT_BCON;
 193                 musb->is_active = 0;
 194                 break;
 195         case OTG_STATE_A_WAIT_VFALL:
 196                 musb->xceiv.state = OTG_STATE_B_IDLE;
 197                 break;
 198         default:
 199                 DBG(1, "host disconnect (%s)\n", otg_state_string(musb));
 200         }
 201 }
 202
 203
 204 /*---------------------------------------------------------------------*/
 205
 206 /* Caller may or may not hold musb->lock */
 207 int musb_hub_status_data(struct usb_hcd *hcd, char *buf)
 208 {
 209         struct musb     *musb = hcd_to_musb(hcd);
 210         int             retval = 0;
 211
 212         /* called in_irq() via usb_hcd_poll_rh_status() */
 213         if (musb->port1_status & 0xffff0000) {
 214                 *buf = 0x02;
 215                 retval = 1;
 216         }
 217         return retval;
 218 }
 219
 220 int musb_hub_control(
 221         struct usb_hcd  *hcd,
 222         u16             typeReq,
 223         u16             wValue,
 224         u16             wIndex,
 225         char            *buf,
 226         u16             wLength)
 227 {
 228         struct musb     *musb = hcd_to_musb(hcd);
 229         u32             temp;
 230         int             retval = 0;
 231         unsigned long   flags;
 232
 233         spin_lock_irqsave(&musb->lock, flags);
 234
 235         if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))) {
 236                 spin_unlock_irqrestore(&musb->lock, flags);
 237                 return -ESHUTDOWN;
 238         }
 239
 240         /* hub features:  always zero, setting is a NOP
 241          * port features: reported, sometimes updated when host is active
 242          * no indicators
 243          */
 244         switch (typeReq) {
 245         case ClearHubFeature:
 246         case SetHubFeature:
 247                 switch (wValue) {
 248                 case C_HUB_OVER_CURRENT:
 249                 case C_HUB_LOCAL_POWER:
 250                         break;
 251                 default:
 252                         goto error;
 253                 }
 254                 break;
 255         case ClearPortFeature:
 256                 if ((wIndex & 0xff) != 1)
 257                         goto error;
 258
 259                 switch (wValue) {
 260                 case USB_PORT_FEAT_ENABLE:
 261                         break;
 262                 case USB_PORT_FEAT_SUSPEND:
 263                         musb_port_suspend(musb, false);
 264                         break;
 265                 case USB_PORT_FEAT_POWER:
 266                         if (!(is_otg_enabled(musb) && hcd->self.is_b_host))
 267                                 musb_set_vbus(musb, 0);
 268                         break;
 269                 case USB_PORT_FEAT_C_CONNECTION:
 270                 case USB_PORT_FEAT_C_ENABLE:
 271                 case USB_PORT_FEAT_C_OVER_CURRENT:
 272                 case USB_PORT_FEAT_C_RESET:
 273                 case USB_PORT_FEAT_C_SUSPEND:
 274                         break;
 275                 default:
 276                         goto error;
 277                 }
 278                 DBG(5, "clear feature %d\n", wValue);
 279                 musb->port1_status &= ~(1 << wValue);
 280                 break;
 281         case GetHubDescriptor:
 282                 {
 283                 struct usb_hub_descriptor *desc = (void *)buf;
 284
 285                 desc->bDescLength = 9;
 286                 desc->bDescriptorType = 0x29;
 287                 desc->bNbrPorts = 1;
 288                 desc->wHubCharacteristics = __constant_cpu_to_le16(
 289                                   0x0001        /* per-port power switching */
 290                                 | 0x0010        /* no overcurrent reporting */
 291                                 );
 292                 desc->bPwrOn2PwrGood = 5;       /* msec/2 */
 293                 desc->bHubContrCurrent = 0;
 294
 295                 /* workaround bogus struct definition */
 296                 desc->DeviceRemovable[0] = 0x02;        /* port 1 */
 297                 desc->DeviceRemovable[1] = 0xff;
 298                 }
 299                 break;
 300         case GetHubStatus:
 301                 temp = 0;
 302                 *(__le32 *) buf = cpu_to_le32(temp);
 303                 break;
 304         case GetPortStatus:
 305                 if (wIndex != 1)
 306                         goto error;
 307
 308                 /* finish RESET signaling? */
 309                 if ((musb->port1_status & USB_PORT_STAT_RESET)
 310                                 && time_after_eq(jiffies, musb->rh_timer))
 311                         musb_port_reset(musb, false);
 312
 313                 /* finish RESUME signaling? */
 314                 if ((musb->port1_status & MUSB_PORT_STAT_RESUME)
 315                                 && time_after_eq(jiffies, musb->rh_timer)) {
 316                         u8              power;
 317
 318                         power = musb_readb(musb->mregs, MUSB_POWER);
 319                         power &= ~MUSB_POWER_RESUME;
 320                         DBG(4, "root port resume stopped, power %02x\n",
 321                                         power);
 322                         musb_writeb(musb->mregs, MUSB_POWER, power);
 323
 324                         /* ISSUE:  DaVinci (RTL 1.300) disconnects after
 325                          * resume of high speed peripherals (but not full
 326                          * speed ones).
 327                          */
 328
 329                         musb->is_active = 1;
 330                         musb->port1_status &= ~(USB_PORT_STAT_SUSPEND
 331                                         | MUSB_PORT_STAT_RESUME);
 332                         musb->port1_status |= USB_PORT_STAT_C_SUSPEND << 16;
 333                         usb_hcd_poll_rh_status(musb_to_hcd(musb));
 334                         /* NOTE: it might really be A_WAIT_BCON ... */
 335                         musb->xceiv.state = OTG_STATE_A_HOST;
 336                 }
 337
 338                 put_unaligned(cpu_to_le32(musb->port1_status
 339                                         & ~MUSB_PORT_STAT_RESUME),
 340                                 (__le32 *) buf);
 341
 342                 /* port change status is more interesting */
 343                 DBG(get_unaligned((u16 *)(buf+2)) ? 2 : 5, "port status %08x\n",
 344                                 musb->port1_status);
 345                 break;
 346         case SetPortFeature:
 347                 if ((wIndex & 0xff) != 1)
 348                         goto error;
 349
 350                 switch (wValue) {
 351                 case USB_PORT_FEAT_POWER:
 352                         /* NOTE: this controller has a strange state machine
 353                          * that involves "requesting sessions" according to
 354                          * magic side effects from incompletely-described
 355                          * rules about startup...
 356                          *
 357                          * This call is what really starts the host mode; be
 358                          * very careful about side effects if you reorder any
 359                          * initialization logic, e.g. for OTG, or change any
 360                          * logic relating to VBUS power-up.
 361                          */
 362                         if (!(is_otg_enabled(musb) && hcd->self.is_b_host))
 363                                 musb_start(musb);
 364                         break;
 365                 case USB_PORT_FEAT_RESET:
 366                         musb_port_reset(musb, true);
 367                         break;
 368                 case USB_PORT_FEAT_SUSPEND:
 369                         musb_port_suspend(musb, true);
 370                         break;
 371                 case USB_PORT_FEAT_TEST:
 372                         if (unlikely(is_host_active(musb)))
 373                                 goto error;
 374
 375                         wIndex >>= 8;
 376                         switch (wIndex) {
 377                         case 1:
 378                                 pr_debug("TEST_J\n");
 379                                 temp = MUSB_TEST_J;
 380                                 break;
 381                         case 2:
 382                                 pr_debug("TEST_K\n");
 383                                 temp = MUSB_TEST_K;
 384                                 break;
 385                         case 3:
 386                                 pr_debug("TEST_SE0_NAK\n");
 387                                 temp = MUSB_TEST_SE0_NAK;
 388                                 break;
 389                         case 4:
 390                                 pr_debug("TEST_PACKET\n");
 391                                 temp = MUSB_TEST_PACKET;
 392                                 musb_load_testpacket(musb);
 393                                 break;
 394                         case 5:
 395                                 pr_debug("TEST_FORCE_ENABLE\n");
 396                                 temp = MUSB_TEST_FORCE_HOST
 397                                         | MUSB_TEST_FORCE_HS;
 398
 399                                 musb_writeb(musb->mregs, MUSB_DEVCTL,
 400                                                 MUSB_DEVCTL_SESSION);
 401                                 break;
 402                         case 6:
 403                                 pr_debug("TEST_FIFO_ACCESS\n");
 404                                 temp = MUSB_TEST_FIFO_ACCESS;
 405                                 break;
 406                         default:
 407                                 goto error;
 408                         }
 409                         musb_writeb(musb->mregs, MUSB_TESTMODE, temp);
 410                         break;
 411                 default:
 412                         goto error;
 413                 }
 414                 DBG(5, "set feature %d\n", wValue);
 415                 musb->port1_status |= 1 << wValue;
 416                 break;
 417
 418         default:
 419 error:
 420                 /* "protocol stall" on error */
 421                 retval = -EPIPE;
 422         }
 423         spin_unlock_irqrestore(&musb->lock, flags);
 424         return retval;
 425 }