Merge branch 'next' of git://git.monstr.eu/linux-2.6-microblaze
[linux-2.6.git] / drivers / usb / host / xhci-ring.c
1 /*
2  * xHCI host controller driver
3  *
4  * Copyright (C) 2008 Intel Corp.
5  *
6  * Author: Sarah Sharp
7  * Some code borrowed from the Linux EHCI driver.
8  *
9  * This program is free software; you can redistribute it and/or modify
10  * it under the terms of the GNU General Public License version 2 as
11  * published by the Free Software Foundation.
12  *
13  * This program is distributed in the hope that it will be useful, but
14  * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
15  * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
16  * for more details.
17  *
18  * You should have received a copy of the GNU General Public License
19  * along with this program; if not, write to the Free Software Foundation,
20  * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
21  */
22
23 /*
24  * Ring initialization rules:
25  * 1. Each segment is initialized to zero, except for link TRBs.
26  * 2. Ring cycle state = 0.  This represents Producer Cycle State (PCS) or
27  *    Consumer Cycle State (CCS), depending on ring function.
28  * 3. Enqueue pointer = dequeue pointer = address of first TRB in the segment.
29  *
30  * Ring behavior rules:
31  * 1. A ring is empty if enqueue == dequeue.  This means there will always be at
32  *    least one free TRB in the ring.  This is useful if you want to turn that
33  *    into a link TRB and expand the ring.
34  * 2. When incrementing an enqueue or dequeue pointer, if the next TRB is a
35  *    link TRB, then load the pointer with the address in the link TRB.  If the
36  *    link TRB had its toggle bit set, you may need to update the ring cycle
37  *    state (see cycle bit rules).  You may have to do this multiple times
38  *    until you reach a non-link TRB.
39  * 3. A ring is full if enqueue++ (for the definition of increment above)
40  *    equals the dequeue pointer.
41  *
42  * Cycle bit rules:
43  * 1. When a consumer increments a dequeue pointer and encounters a toggle bit
44  *    in a link TRB, it must toggle the ring cycle state.
45  * 2. When a producer increments an enqueue pointer and encounters a toggle bit
46  *    in a link TRB, it must toggle the ring cycle state.
47  *
48  * Producer rules:
49  * 1. Check if ring is full before you enqueue.
50  * 2. Write the ring cycle state to the cycle bit in the TRB you're enqueuing.
51  *    Update enqueue pointer between each write (which may update the ring
52  *    cycle state).
53  * 3. Notify consumer.  If SW is producer, it rings the doorbell for command
54  *    and endpoint rings.  If HC is the producer for the event ring,
55  *    and it generates an interrupt according to interrupt modulation rules.
56  *
57  * Consumer rules:
58  * 1. Check if TRB belongs to you.  If the cycle bit == your ring cycle state,
59  *    the TRB is owned by the consumer.
60  * 2. Update dequeue pointer (which may update the ring cycle state) and
61  *    continue processing TRBs until you reach a TRB which is not owned by you.
62  * 3. Notify the producer.  SW is the consumer for the event ring, and it
63  *   updates event ring dequeue pointer.  HC is the consumer for the command and
64  *   endpoint rings; it generates events on the event ring for these.
65  */
66
67 #include <linux/scatterlist.h>
68 #include <linux/slab.h>
69 #include "xhci.h"
70
71 static int handle_cmd_in_cmd_wait_list(struct xhci_hcd *xhci,
72                 struct xhci_virt_device *virt_dev,
73                 struct xhci_event_cmd *event);
74
75 /*
76  * Returns zero if the TRB isn't in this segment, otherwise it returns the DMA
77  * address of the TRB.
78  */
79 dma_addr_t xhci_trb_virt_to_dma(struct xhci_segment *seg,
80                 union xhci_trb *trb)
81 {
82         unsigned long segment_offset;
83
84         if (!seg || !trb || trb < seg->trbs)
85                 return 0;
86         /* offset in TRBs */
87         segment_offset = trb - seg->trbs;
88         if (segment_offset > TRBS_PER_SEGMENT)
89                 return 0;
90         return seg->dma + (segment_offset * sizeof(*trb));
91 }
92
93 /* Does this link TRB point to the first segment in a ring,
94  * or was the previous TRB the last TRB on the last segment in the ERST?
95  */
96 static inline bool last_trb_on_last_seg(struct xhci_hcd *xhci, struct xhci_ring *ring,
97                 struct xhci_segment *seg, union xhci_trb *trb)
98 {
99         if (ring == xhci->event_ring)
100                 return (trb == &seg->trbs[TRBS_PER_SEGMENT]) &&
101                         (seg->next == xhci->event_ring->first_seg);
102         else
103                 return trb->link.control & LINK_TOGGLE;
104 }
105
106 /* Is this TRB a link TRB or was the last TRB the last TRB in this event ring
107  * segment?  I.e. would the updated event TRB pointer step off the end of the
108  * event seg?
109  */
110 static inline int last_trb(struct xhci_hcd *xhci, struct xhci_ring *ring,
111                 struct xhci_segment *seg, union xhci_trb *trb)
112 {
113         if (ring == xhci->event_ring)
114                 return trb == &seg->trbs[TRBS_PER_SEGMENT];
115         else
116                 return (trb->link.control & TRB_TYPE_BITMASK) == TRB_TYPE(TRB_LINK);
117 }
118
119 static inline int enqueue_is_link_trb(struct xhci_ring *ring)
120 {
121         struct xhci_link_trb *link = &ring->enqueue->link;
122         return ((link->control & TRB_TYPE_BITMASK) == TRB_TYPE(TRB_LINK));
123 }
124
125 /* Updates trb to point to the next TRB in the ring, and updates seg if the next
126  * TRB is in a new segment.  This does not skip over link TRBs, and it does not
127  * effect the ring dequeue or enqueue pointers.
128  */
129 static void next_trb(struct xhci_hcd *xhci,
130                 struct xhci_ring *ring,
131                 struct xhci_segment **seg,
132                 union xhci_trb **trb)
133 {
134         if (last_trb(xhci, ring, *seg, *trb)) {
135                 *seg = (*seg)->next;
136                 *trb = ((*seg)->trbs);
137         } else {
138                 (*trb)++;
139         }
140 }
141
142 /*
143  * See Cycle bit rules. SW is the consumer for the event ring only.
144  * Don't make a ring full of link TRBs.  That would be dumb and this would loop.
145  */
146 static void inc_deq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer)
147 {
148         union xhci_trb *next = ++(ring->dequeue);
149         unsigned long long addr;
150
151         ring->deq_updates++;
152         /* Update the dequeue pointer further if that was a link TRB or we're at
153          * the end of an event ring segment (which doesn't have link TRBS)
154          */
155         while (last_trb(xhci, ring, ring->deq_seg, next)) {
156                 if (consumer && last_trb_on_last_seg(xhci, ring, ring->deq_seg, next)) {
157                         ring->cycle_state = (ring->cycle_state ? 0 : 1);
158                         if (!in_interrupt())
159                                 xhci_dbg(xhci, "Toggle cycle state for ring %p = %i\n",
160                                                 ring,
161                                                 (unsigned int) ring->cycle_state);
162                 }
163                 ring->deq_seg = ring->deq_seg->next;
164                 ring->dequeue = ring->deq_seg->trbs;
165                 next = ring->dequeue;
166         }
167         addr = (unsigned long long) xhci_trb_virt_to_dma(ring->deq_seg, ring->dequeue);
168         if (ring == xhci->event_ring)
169                 xhci_dbg(xhci, "Event ring deq = 0x%llx (DMA)\n", addr);
170         else if (ring == xhci->cmd_ring)
171                 xhci_dbg(xhci, "Command ring deq = 0x%llx (DMA)\n", addr);
172         else
173                 xhci_dbg(xhci, "Ring deq = 0x%llx (DMA)\n", addr);
174 }
175
176 /*
177  * See Cycle bit rules. SW is the consumer for the event ring only.
178  * Don't make a ring full of link TRBs.  That would be dumb and this would loop.
179  *
180  * If we've just enqueued a TRB that is in the middle of a TD (meaning the
181  * chain bit is set), then set the chain bit in all the following link TRBs.
182  * If we've enqueued the last TRB in a TD, make sure the following link TRBs
183  * have their chain bit cleared (so that each Link TRB is a separate TD).
184  *
185  * Section 6.4.4.1 of the 0.95 spec says link TRBs cannot have the chain bit
186  * set, but other sections talk about dealing with the chain bit set.  This was
187  * fixed in the 0.96 specification errata, but we have to assume that all 0.95
188  * xHCI hardware can't handle the chain bit being cleared on a link TRB.
189  *
190  * @more_trbs_coming:   Will you enqueue more TRBs before calling
191  *                      prepare_transfer()?
192  */
193 static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring,
194                 bool consumer, bool more_trbs_coming)
195 {
196         u32 chain;
197         union xhci_trb *next;
198         unsigned long long addr;
199
200         chain = ring->enqueue->generic.field[3] & TRB_CHAIN;
201         next = ++(ring->enqueue);
202
203         ring->enq_updates++;
204         /* Update the dequeue pointer further if that was a link TRB or we're at
205          * the end of an event ring segment (which doesn't have link TRBS)
206          */
207         while (last_trb(xhci, ring, ring->enq_seg, next)) {
208                 if (!consumer) {
209                         if (ring != xhci->event_ring) {
210                                 /*
211                                  * If the caller doesn't plan on enqueueing more
212                                  * TDs before ringing the doorbell, then we
213                                  * don't want to give the link TRB to the
214                                  * hardware just yet.  We'll give the link TRB
215                                  * back in prepare_ring() just before we enqueue
216                                  * the TD at the top of the ring.
217                                  */
218                                 if (!chain && !more_trbs_coming)
219                                         break;
220
221                                 /* If we're not dealing with 0.95 hardware,
222                                  * carry over the chain bit of the previous TRB
223                                  * (which may mean the chain bit is cleared).
224                                  */
225                                 if (!xhci_link_trb_quirk(xhci)) {
226                                         next->link.control &= ~TRB_CHAIN;
227                                         next->link.control |= chain;
228                                 }
229                                 /* Give this link TRB to the hardware */
230                                 wmb();
231                                 next->link.control ^= TRB_CYCLE;
232                         }
233                         /* Toggle the cycle bit after the last ring segment. */
234                         if (last_trb_on_last_seg(xhci, ring, ring->enq_seg, next)) {
235                                 ring->cycle_state = (ring->cycle_state ? 0 : 1);
236                                 if (!in_interrupt())
237                                         xhci_dbg(xhci, "Toggle cycle state for ring %p = %i\n",
238                                                         ring,
239                                                         (unsigned int) ring->cycle_state);
240                         }
241                 }
242                 ring->enq_seg = ring->enq_seg->next;
243                 ring->enqueue = ring->enq_seg->trbs;
244                 next = ring->enqueue;
245         }
246         addr = (unsigned long long) xhci_trb_virt_to_dma(ring->enq_seg, ring->enqueue);
247         if (ring == xhci->event_ring)
248                 xhci_dbg(xhci, "Event ring enq = 0x%llx (DMA)\n", addr);
249         else if (ring == xhci->cmd_ring)
250                 xhci_dbg(xhci, "Command ring enq = 0x%llx (DMA)\n", addr);
251         else
252                 xhci_dbg(xhci, "Ring enq = 0x%llx (DMA)\n", addr);
253 }
254
255 /*
256  * Check to see if there's room to enqueue num_trbs on the ring.  See rules
257  * above.
258  * FIXME: this would be simpler and faster if we just kept track of the number
259  * of free TRBs in a ring.
260  */
261 static int room_on_ring(struct xhci_hcd *xhci, struct xhci_ring *ring,
262                 unsigned int num_trbs)
263 {
264         int i;
265         union xhci_trb *enq = ring->enqueue;
266         struct xhci_segment *enq_seg = ring->enq_seg;
267         struct xhci_segment *cur_seg;
268         unsigned int left_on_ring;
269
270         /* If we are currently pointing to a link TRB, advance the
271          * enqueue pointer before checking for space */
272         while (last_trb(xhci, ring, enq_seg, enq)) {
273                 enq_seg = enq_seg->next;
274                 enq = enq_seg->trbs;
275         }
276
277         /* Check if ring is empty */
278         if (enq == ring->dequeue) {
279                 /* Can't use link trbs */
280                 left_on_ring = TRBS_PER_SEGMENT - 1;
281                 for (cur_seg = enq_seg->next; cur_seg != enq_seg;
282                                 cur_seg = cur_seg->next)
283                         left_on_ring += TRBS_PER_SEGMENT - 1;
284
285                 /* Always need one TRB free in the ring. */
286                 left_on_ring -= 1;
287                 if (num_trbs > left_on_ring) {
288                         xhci_warn(xhci, "Not enough room on ring; "
289                                         "need %u TRBs, %u TRBs left\n",
290                                         num_trbs, left_on_ring);
291                         return 0;
292                 }
293                 return 1;
294         }
295         /* Make sure there's an extra empty TRB available */
296         for (i = 0; i <= num_trbs; ++i) {
297                 if (enq == ring->dequeue)
298                         return 0;
299                 enq++;
300                 while (last_trb(xhci, ring, enq_seg, enq)) {
301                         enq_seg = enq_seg->next;
302                         enq = enq_seg->trbs;
303                 }
304         }
305         return 1;
306 }
307
308 /* Ring the host controller doorbell after placing a command on the ring */
309 void xhci_ring_cmd_db(struct xhci_hcd *xhci)
310 {
311         xhci_dbg(xhci, "// Ding dong!\n");
312         xhci_writel(xhci, DB_VALUE_HOST, &xhci->dba->doorbell[0]);
313         /* Flush PCI posted writes */
314         xhci_readl(xhci, &xhci->dba->doorbell[0]);
315 }
316
317 void xhci_ring_ep_doorbell(struct xhci_hcd *xhci,
318                 unsigned int slot_id,
319                 unsigned int ep_index,
320                 unsigned int stream_id)
321 {
322         __u32 __iomem *db_addr = &xhci->dba->doorbell[slot_id];
323         struct xhci_virt_ep *ep = &xhci->devs[slot_id]->eps[ep_index];
324         unsigned int ep_state = ep->ep_state;
325
326         /* Don't ring the doorbell for this endpoint if there are pending
327          * cancellations because we don't want to interrupt processing.
328          * We don't want to restart any stream rings if there's a set dequeue
329          * pointer command pending because the device can choose to start any
330          * stream once the endpoint is on the HW schedule.
331          * FIXME - check all the stream rings for pending cancellations.
332          */
333         if ((ep_state & EP_HALT_PENDING) || (ep_state & SET_DEQ_PENDING) ||
334             (ep_state & EP_HALTED))
335                 return;
336         xhci_writel(xhci, DB_VALUE(ep_index, stream_id), db_addr);
337         /* The CPU has better things to do at this point than wait for a
338          * write-posting flush.  It'll get there soon enough.
339          */
340 }
341
342 /* Ring the doorbell for any rings with pending URBs */
343 static void ring_doorbell_for_active_rings(struct xhci_hcd *xhci,
344                 unsigned int slot_id,
345                 unsigned int ep_index)
346 {
347         unsigned int stream_id;
348         struct xhci_virt_ep *ep;
349
350         ep = &xhci->devs[slot_id]->eps[ep_index];
351
352         /* A ring has pending URBs if its TD list is not empty */
353         if (!(ep->ep_state & EP_HAS_STREAMS)) {
354                 if (!(list_empty(&ep->ring->td_list)))
355                         xhci_ring_ep_doorbell(xhci, slot_id, ep_index, 0);
356                 return;
357         }
358
359         for (stream_id = 1; stream_id < ep->stream_info->num_streams;
360                         stream_id++) {
361                 struct xhci_stream_info *stream_info = ep->stream_info;
362                 if (!list_empty(&stream_info->stream_rings[stream_id]->td_list))
363                         xhci_ring_ep_doorbell(xhci, slot_id, ep_index,
364                                                 stream_id);
365         }
366 }
367
368 /*
369  * Find the segment that trb is in.  Start searching in start_seg.
370  * If we must move past a segment that has a link TRB with a toggle cycle state
371  * bit set, then we will toggle the value pointed at by cycle_state.
372  */
373 static struct xhci_segment *find_trb_seg(
374                 struct xhci_segment *start_seg,
375                 union xhci_trb  *trb, int *cycle_state)
376 {
377         struct xhci_segment *cur_seg = start_seg;
378         struct xhci_generic_trb *generic_trb;
379
380         while (cur_seg->trbs > trb ||
381                         &cur_seg->trbs[TRBS_PER_SEGMENT - 1] < trb) {
382                 generic_trb = &cur_seg->trbs[TRBS_PER_SEGMENT - 1].generic;
383                 if ((generic_trb->field[3] & TRB_TYPE_BITMASK) ==
384                                 TRB_TYPE(TRB_LINK) &&
385                                 (generic_trb->field[3] & LINK_TOGGLE))
386                         *cycle_state = ~(*cycle_state) & 0x1;
387                 cur_seg = cur_seg->next;
388                 if (cur_seg == start_seg)
389                         /* Looped over the entire list.  Oops! */
390                         return NULL;
391         }
392         return cur_seg;
393 }
394
395
396 static struct xhci_ring *xhci_triad_to_transfer_ring(struct xhci_hcd *xhci,
397                 unsigned int slot_id, unsigned int ep_index,
398                 unsigned int stream_id)
399 {
400         struct xhci_virt_ep *ep;
401
402         ep = &xhci->devs[slot_id]->eps[ep_index];
403         /* Common case: no streams */
404         if (!(ep->ep_state & EP_HAS_STREAMS))
405                 return ep->ring;
406
407         if (stream_id == 0) {
408                 xhci_warn(xhci,
409                                 "WARN: Slot ID %u, ep index %u has streams, "
410                                 "but URB has no stream ID.\n",
411                                 slot_id, ep_index);
412                 return NULL;
413         }
414
415         if (stream_id < ep->stream_info->num_streams)
416                 return ep->stream_info->stream_rings[stream_id];
417
418         xhci_warn(xhci,
419                         "WARN: Slot ID %u, ep index %u has "
420                         "stream IDs 1 to %u allocated, "
421                         "but stream ID %u is requested.\n",
422                         slot_id, ep_index,
423                         ep->stream_info->num_streams - 1,
424                         stream_id);
425         return NULL;
426 }
427
428 /* Get the right ring for the given URB.
429  * If the endpoint supports streams, boundary check the URB's stream ID.
430  * If the endpoint doesn't support streams, return the singular endpoint ring.
431  */
432 static struct xhci_ring *xhci_urb_to_transfer_ring(struct xhci_hcd *xhci,
433                 struct urb *urb)
434 {
435         return xhci_triad_to_transfer_ring(xhci, urb->dev->slot_id,
436                 xhci_get_endpoint_index(&urb->ep->desc), urb->stream_id);
437 }
438
439 /*
440  * Move the xHC's endpoint ring dequeue pointer past cur_td.
441  * Record the new state of the xHC's endpoint ring dequeue segment,
442  * dequeue pointer, and new consumer cycle state in state.
443  * Update our internal representation of the ring's dequeue pointer.
444  *
445  * We do this in three jumps:
446  *  - First we update our new ring state to be the same as when the xHC stopped.
447  *  - Then we traverse the ring to find the segment that contains
448  *    the last TRB in the TD.  We toggle the xHC's new cycle state when we pass
449  *    any link TRBs with the toggle cycle bit set.
450  *  - Finally we move the dequeue state one TRB further, toggling the cycle bit
451  *    if we've moved it past a link TRB with the toggle cycle bit set.
452  */
453 void xhci_find_new_dequeue_state(struct xhci_hcd *xhci,
454                 unsigned int slot_id, unsigned int ep_index,
455                 unsigned int stream_id, struct xhci_td *cur_td,
456                 struct xhci_dequeue_state *state)
457 {
458         struct xhci_virt_device *dev = xhci->devs[slot_id];
459         struct xhci_ring *ep_ring;
460         struct xhci_generic_trb *trb;
461         struct xhci_ep_ctx *ep_ctx;
462         dma_addr_t addr;
463
464         ep_ring = xhci_triad_to_transfer_ring(xhci, slot_id,
465                         ep_index, stream_id);
466         if (!ep_ring) {
467                 xhci_warn(xhci, "WARN can't find new dequeue state "
468                                 "for invalid stream ID %u.\n",
469                                 stream_id);
470                 return;
471         }
472         state->new_cycle_state = 0;
473         xhci_dbg(xhci, "Finding segment containing stopped TRB.\n");
474         state->new_deq_seg = find_trb_seg(cur_td->start_seg,
475                         dev->eps[ep_index].stopped_trb,
476                         &state->new_cycle_state);
477         if (!state->new_deq_seg)
478                 BUG();
479         /* Dig out the cycle state saved by the xHC during the stop ep cmd */
480         xhci_dbg(xhci, "Finding endpoint context\n");
481         ep_ctx = xhci_get_ep_ctx(xhci, dev->out_ctx, ep_index);
482         state->new_cycle_state = 0x1 & ep_ctx->deq;
483
484         state->new_deq_ptr = cur_td->last_trb;
485         xhci_dbg(xhci, "Finding segment containing last TRB in TD.\n");
486         state->new_deq_seg = find_trb_seg(state->new_deq_seg,
487                         state->new_deq_ptr,
488                         &state->new_cycle_state);
489         if (!state->new_deq_seg)
490                 BUG();
491
492         trb = &state->new_deq_ptr->generic;
493         if ((trb->field[3] & TRB_TYPE_BITMASK) == TRB_TYPE(TRB_LINK) &&
494                                 (trb->field[3] & LINK_TOGGLE))
495                 state->new_cycle_state = ~(state->new_cycle_state) & 0x1;
496         next_trb(xhci, ep_ring, &state->new_deq_seg, &state->new_deq_ptr);
497
498         /* Don't update the ring cycle state for the producer (us). */
499         xhci_dbg(xhci, "New dequeue segment = %p (virtual)\n",
500                         state->new_deq_seg);
501         addr = xhci_trb_virt_to_dma(state->new_deq_seg, state->new_deq_ptr);
502         xhci_dbg(xhci, "New dequeue pointer = 0x%llx (DMA)\n",
503                         (unsigned long long) addr);
504         xhci_dbg(xhci, "Setting dequeue pointer in internal ring state.\n");
505         ep_ring->dequeue = state->new_deq_ptr;
506         ep_ring->deq_seg = state->new_deq_seg;
507 }
508
509 static void td_to_noop(struct xhci_hcd *xhci, struct xhci_ring *ep_ring,
510                 struct xhci_td *cur_td)
511 {
512         struct xhci_segment *cur_seg;
513         union xhci_trb *cur_trb;
514
515         for (cur_seg = cur_td->start_seg, cur_trb = cur_td->first_trb;
516                         true;
517                         next_trb(xhci, ep_ring, &cur_seg, &cur_trb)) {
518                 if ((cur_trb->generic.field[3] & TRB_TYPE_BITMASK) ==
519                                 TRB_TYPE(TRB_LINK)) {
520                         /* Unchain any chained Link TRBs, but
521                          * leave the pointers intact.
522                          */
523                         cur_trb->generic.field[3] &= ~TRB_CHAIN;
524                         xhci_dbg(xhci, "Cancel (unchain) link TRB\n");
525                         xhci_dbg(xhci, "Address = %p (0x%llx dma); "
526                                         "in seg %p (0x%llx dma)\n",
527                                         cur_trb,
528                                         (unsigned long long)xhci_trb_virt_to_dma(cur_seg, cur_trb),
529                                         cur_seg,
530                                         (unsigned long long)cur_seg->dma);
531                 } else {
532                         cur_trb->generic.field[0] = 0;
533                         cur_trb->generic.field[1] = 0;
534                         cur_trb->generic.field[2] = 0;
535                         /* Preserve only the cycle bit of this TRB */
536                         cur_trb->generic.field[3] &= TRB_CYCLE;
537                         cur_trb->generic.field[3] |= TRB_TYPE(TRB_TR_NOOP);
538                         xhci_dbg(xhci, "Cancel TRB %p (0x%llx dma) "
539                                         "in seg %p (0x%llx dma)\n",
540                                         cur_trb,
541                                         (unsigned long long)xhci_trb_virt_to_dma(cur_seg, cur_trb),
542                                         cur_seg,
543                                         (unsigned long long)cur_seg->dma);
544                 }
545                 if (cur_trb == cur_td->last_trb)
546                         break;
547         }
548 }
549
550 static int queue_set_tr_deq(struct xhci_hcd *xhci, int slot_id,
551                 unsigned int ep_index, unsigned int stream_id,
552                 struct xhci_segment *deq_seg,
553                 union xhci_trb *deq_ptr, u32 cycle_state);
554
555 void xhci_queue_new_dequeue_state(struct xhci_hcd *xhci,
556                 unsigned int slot_id, unsigned int ep_index,
557                 unsigned int stream_id,
558                 struct xhci_dequeue_state *deq_state)
559 {
560         struct xhci_virt_ep *ep = &xhci->devs[slot_id]->eps[ep_index];
561
562         xhci_dbg(xhci, "Set TR Deq Ptr cmd, new deq seg = %p (0x%llx dma), "
563                         "new deq ptr = %p (0x%llx dma), new cycle = %u\n",
564                         deq_state->new_deq_seg,
565                         (unsigned long long)deq_state->new_deq_seg->dma,
566                         deq_state->new_deq_ptr,
567                         (unsigned long long)xhci_trb_virt_to_dma(deq_state->new_deq_seg, deq_state->new_deq_ptr),
568                         deq_state->new_cycle_state);
569         queue_set_tr_deq(xhci, slot_id, ep_index, stream_id,
570                         deq_state->new_deq_seg,
571                         deq_state->new_deq_ptr,
572                         (u32) deq_state->new_cycle_state);
573         /* Stop the TD queueing code from ringing the doorbell until
574          * this command completes.  The HC won't set the dequeue pointer
575          * if the ring is running, and ringing the doorbell starts the
576          * ring running.
577          */
578         ep->ep_state |= SET_DEQ_PENDING;
579 }
580
581 static inline void xhci_stop_watchdog_timer_in_irq(struct xhci_hcd *xhci,
582                 struct xhci_virt_ep *ep)
583 {
584         ep->ep_state &= ~EP_HALT_PENDING;
585         /* Can't del_timer_sync in interrupt, so we attempt to cancel.  If the
586          * timer is running on another CPU, we don't decrement stop_cmds_pending
587          * (since we didn't successfully stop the watchdog timer).
588          */
589         if (del_timer(&ep->stop_cmd_timer))
590                 ep->stop_cmds_pending--;
591 }
592
593 /* Must be called with xhci->lock held in interrupt context */
594 static void xhci_giveback_urb_in_irq(struct xhci_hcd *xhci,
595                 struct xhci_td *cur_td, int status, char *adjective)
596 {
597         struct usb_hcd *hcd = xhci_to_hcd(xhci);
598         struct urb      *urb;
599         struct urb_priv *urb_priv;
600
601         urb = cur_td->urb;
602         urb_priv = urb->hcpriv;
603         urb_priv->td_cnt++;
604
605         /* Only giveback urb when this is the last td in urb */
606         if (urb_priv->td_cnt == urb_priv->length) {
607                 usb_hcd_unlink_urb_from_ep(hcd, urb);
608                 xhci_dbg(xhci, "Giveback %s URB %p\n", adjective, urb);
609
610                 spin_unlock(&xhci->lock);
611                 usb_hcd_giveback_urb(hcd, urb, status);
612                 xhci_urb_free_priv(xhci, urb_priv);
613                 spin_lock(&xhci->lock);
614                 xhci_dbg(xhci, "%s URB given back\n", adjective);
615         }
616 }
617
618 /*
619  * When we get a command completion for a Stop Endpoint Command, we need to
620  * unlink any cancelled TDs from the ring.  There are two ways to do that:
621  *
622  *  1. If the HW was in the middle of processing the TD that needs to be
623  *     cancelled, then we must move the ring's dequeue pointer past the last TRB
624  *     in the TD with a Set Dequeue Pointer Command.
625  *  2. Otherwise, we turn all the TRBs in the TD into No-op TRBs (with the chain
626  *     bit cleared) so that the HW will skip over them.
627  */
628 static void handle_stopped_endpoint(struct xhci_hcd *xhci,
629                 union xhci_trb *trb, struct xhci_event_cmd *event)
630 {
631         unsigned int slot_id;
632         unsigned int ep_index;
633         struct xhci_virt_device *virt_dev;
634         struct xhci_ring *ep_ring;
635         struct xhci_virt_ep *ep;
636         struct list_head *entry;
637         struct xhci_td *cur_td = NULL;
638         struct xhci_td *last_unlinked_td;
639
640         struct xhci_dequeue_state deq_state;
641
642         if (unlikely(TRB_TO_SUSPEND_PORT(
643                         xhci->cmd_ring->dequeue->generic.field[3]))) {
644                 slot_id = TRB_TO_SLOT_ID(
645                         xhci->cmd_ring->dequeue->generic.field[3]);
646                 virt_dev = xhci->devs[slot_id];
647                 if (virt_dev)
648                         handle_cmd_in_cmd_wait_list(xhci, virt_dev,
649                                 event);
650                 else
651                         xhci_warn(xhci, "Stop endpoint command "
652                                 "completion for disabled slot %u\n",
653                                 slot_id);
654                 return;
655         }
656
657         memset(&deq_state, 0, sizeof(deq_state));
658         slot_id = TRB_TO_SLOT_ID(trb->generic.field[3]);
659         ep_index = TRB_TO_EP_INDEX(trb->generic.field[3]);
660         ep = &xhci->devs[slot_id]->eps[ep_index];
661
662         if (list_empty(&ep->cancelled_td_list)) {
663                 xhci_stop_watchdog_timer_in_irq(xhci, ep);
664                 ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
665                 return;
666         }
667
668         /* Fix up the ep ring first, so HW stops executing cancelled TDs.
669          * We have the xHCI lock, so nothing can modify this list until we drop
670          * it.  We're also in the event handler, so we can't get re-interrupted
671          * if another Stop Endpoint command completes
672          */
673         list_for_each(entry, &ep->cancelled_td_list) {
674                 cur_td = list_entry(entry, struct xhci_td, cancelled_td_list);
675                 xhci_dbg(xhci, "Cancelling TD starting at %p, 0x%llx (dma).\n",
676                                 cur_td->first_trb,
677                                 (unsigned long long)xhci_trb_virt_to_dma(cur_td->start_seg, cur_td->first_trb));
678                 ep_ring = xhci_urb_to_transfer_ring(xhci, cur_td->urb);
679                 if (!ep_ring) {
680                         /* This shouldn't happen unless a driver is mucking
681                          * with the stream ID after submission.  This will
682                          * leave the TD on the hardware ring, and the hardware
683                          * will try to execute it, and may access a buffer
684                          * that has already been freed.  In the best case, the
685                          * hardware will execute it, and the event handler will
686                          * ignore the completion event for that TD, since it was
687                          * removed from the td_list for that endpoint.  In
688                          * short, don't muck with the stream ID after
689                          * submission.
690                          */
691                         xhci_warn(xhci, "WARN Cancelled URB %p "
692                                         "has invalid stream ID %u.\n",
693                                         cur_td->urb,
694                                         cur_td->urb->stream_id);
695                         goto remove_finished_td;
696                 }
697                 /*
698                  * If we stopped on the TD we need to cancel, then we have to
699                  * move the xHC endpoint ring dequeue pointer past this TD.
700                  */
701                 if (cur_td == ep->stopped_td)
702                         xhci_find_new_dequeue_state(xhci, slot_id, ep_index,
703                                         cur_td->urb->stream_id,
704                                         cur_td, &deq_state);
705                 else
706                         td_to_noop(xhci, ep_ring, cur_td);
707 remove_finished_td:
708                 /*
709                  * The event handler won't see a completion for this TD anymore,
710                  * so remove it from the endpoint ring's TD list.  Keep it in
711                  * the cancelled TD list for URB completion later.
712                  */
713                 list_del(&cur_td->td_list);
714         }
715         last_unlinked_td = cur_td;
716         xhci_stop_watchdog_timer_in_irq(xhci, ep);
717
718         /* If necessary, queue a Set Transfer Ring Dequeue Pointer command */
719         if (deq_state.new_deq_ptr && deq_state.new_deq_seg) {
720                 xhci_queue_new_dequeue_state(xhci,
721                                 slot_id, ep_index,
722                                 ep->stopped_td->urb->stream_id,
723                                 &deq_state);
724                 xhci_ring_cmd_db(xhci);
725         } else {
726                 /* Otherwise ring the doorbell(s) to restart queued transfers */
727                 ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
728         }
729         ep->stopped_td = NULL;
730         ep->stopped_trb = NULL;
731
732         /*
733          * Drop the lock and complete the URBs in the cancelled TD list.
734          * New TDs to be cancelled might be added to the end of the list before
735          * we can complete all the URBs for the TDs we already unlinked.
736          * So stop when we've completed the URB for the last TD we unlinked.
737          */
738         do {
739                 cur_td = list_entry(ep->cancelled_td_list.next,
740                                 struct xhci_td, cancelled_td_list);
741                 list_del(&cur_td->cancelled_td_list);
742
743                 /* Clean up the cancelled URB */
744                 /* Doesn't matter what we pass for status, since the core will
745                  * just overwrite it (because the URB has been unlinked).
746                  */
747                 xhci_giveback_urb_in_irq(xhci, cur_td, 0, "cancelled");
748
749                 /* Stop processing the cancelled list if the watchdog timer is
750                  * running.
751                  */
752                 if (xhci->xhc_state & XHCI_STATE_DYING)
753                         return;
754         } while (cur_td != last_unlinked_td);
755
756         /* Return to the event handler with xhci->lock re-acquired */
757 }
758
759 /* Watchdog timer function for when a stop endpoint command fails to complete.
760  * In this case, we assume the host controller is broken or dying or dead.  The
761  * host may still be completing some other events, so we have to be careful to
762  * let the event ring handler and the URB dequeueing/enqueueing functions know
763  * through xhci->state.
764  *
765  * The timer may also fire if the host takes a very long time to respond to the
766  * command, and the stop endpoint command completion handler cannot delete the
767  * timer before the timer function is called.  Another endpoint cancellation may
768  * sneak in before the timer function can grab the lock, and that may queue
769  * another stop endpoint command and add the timer back.  So we cannot use a
770  * simple flag to say whether there is a pending stop endpoint command for a
771  * particular endpoint.
772  *
773  * Instead we use a combination of that flag and a counter for the number of
774  * pending stop endpoint commands.  If the timer is the tail end of the last
775  * stop endpoint command, and the endpoint's command is still pending, we assume
776  * the host is dying.
777  */
778 void xhci_stop_endpoint_command_watchdog(unsigned long arg)
779 {
780         struct xhci_hcd *xhci;
781         struct xhci_virt_ep *ep;
782         struct xhci_virt_ep *temp_ep;
783         struct xhci_ring *ring;
784         struct xhci_td *cur_td;
785         int ret, i, j;
786
787         ep = (struct xhci_virt_ep *) arg;
788         xhci = ep->xhci;
789
790         spin_lock(&xhci->lock);
791
792         ep->stop_cmds_pending--;
793         if (xhci->xhc_state & XHCI_STATE_DYING) {
794                 xhci_dbg(xhci, "Stop EP timer ran, but another timer marked "
795                                 "xHCI as DYING, exiting.\n");
796                 spin_unlock(&xhci->lock);
797                 return;
798         }
799         if (!(ep->stop_cmds_pending == 0 && (ep->ep_state & EP_HALT_PENDING))) {
800                 xhci_dbg(xhci, "Stop EP timer ran, but no command pending, "
801                                 "exiting.\n");
802                 spin_unlock(&xhci->lock);
803                 return;
804         }
805
806         xhci_warn(xhci, "xHCI host not responding to stop endpoint command.\n");
807         xhci_warn(xhci, "Assuming host is dying, halting host.\n");
808         /* Oops, HC is dead or dying or at least not responding to the stop
809          * endpoint command.
810          */
811         xhci->xhc_state |= XHCI_STATE_DYING;
812         /* Disable interrupts from the host controller and start halting it */
813         xhci_quiesce(xhci);
814         spin_unlock(&xhci->lock);
815
816         ret = xhci_halt(xhci);
817
818         spin_lock(&xhci->lock);
819         if (ret < 0) {
820                 /* This is bad; the host is not responding to commands and it's
821                  * not allowing itself to be halted.  At least interrupts are
822                  * disabled, so we can set HC_STATE_HALT and notify the
823                  * USB core.  But if we call usb_hc_died(), it will attempt to
824                  * disconnect all device drivers under this host.  Those
825                  * disconnect() methods will wait for all URBs to be unlinked,
826                  * so we must complete them.
827                  */
828                 xhci_warn(xhci, "Non-responsive xHCI host is not halting.\n");
829                 xhci_warn(xhci, "Completing active URBs anyway.\n");
830                 /* We could turn all TDs on the rings to no-ops.  This won't
831                  * help if the host has cached part of the ring, and is slow if
832                  * we want to preserve the cycle bit.  Skip it and hope the host
833                  * doesn't touch the memory.
834                  */
835         }
836         for (i = 0; i < MAX_HC_SLOTS; i++) {
837                 if (!xhci->devs[i])
838                         continue;
839                 for (j = 0; j < 31; j++) {
840                         temp_ep = &xhci->devs[i]->eps[j];
841                         ring = temp_ep->ring;
842                         if (!ring)
843                                 continue;
844                         xhci_dbg(xhci, "Killing URBs for slot ID %u, "
845                                         "ep index %u\n", i, j);
846                         while (!list_empty(&ring->td_list)) {
847                                 cur_td = list_first_entry(&ring->td_list,
848                                                 struct xhci_td,
849                                                 td_list);
850                                 list_del(&cur_td->td_list);
851                                 if (!list_empty(&cur_td->cancelled_td_list))
852                                         list_del(&cur_td->cancelled_td_list);
853                                 xhci_giveback_urb_in_irq(xhci, cur_td,
854                                                 -ESHUTDOWN, "killed");
855                         }
856                         while (!list_empty(&temp_ep->cancelled_td_list)) {
857                                 cur_td = list_first_entry(
858                                                 &temp_ep->cancelled_td_list,
859                                                 struct xhci_td,
860                                                 cancelled_td_list);
861                                 list_del(&cur_td->cancelled_td_list);
862                                 xhci_giveback_urb_in_irq(xhci, cur_td,
863                                                 -ESHUTDOWN, "killed");
864                         }
865                 }
866         }
867         spin_unlock(&xhci->lock);
868         xhci_to_hcd(xhci)->state = HC_STATE_HALT;
869         xhci_dbg(xhci, "Calling usb_hc_died()\n");
870         usb_hc_died(xhci_to_hcd(xhci));
871         xhci_dbg(xhci, "xHCI host controller is dead.\n");
872 }
873
874 /*
875  * When we get a completion for a Set Transfer Ring Dequeue Pointer command,
876  * we need to clear the set deq pending flag in the endpoint ring state, so that
877  * the TD queueing code can ring the doorbell again.  We also need to ring the
878  * endpoint doorbell to restart the ring, but only if there aren't more
879  * cancellations pending.
880  */
881 static void handle_set_deq_completion(struct xhci_hcd *xhci,
882                 struct xhci_event_cmd *event,
883                 union xhci_trb *trb)
884 {
885         unsigned int slot_id;
886         unsigned int ep_index;
887         unsigned int stream_id;
888         struct xhci_ring *ep_ring;
889         struct xhci_virt_device *dev;
890         struct xhci_ep_ctx *ep_ctx;
891         struct xhci_slot_ctx *slot_ctx;
892
893         slot_id = TRB_TO_SLOT_ID(trb->generic.field[3]);
894         ep_index = TRB_TO_EP_INDEX(trb->generic.field[3]);
895         stream_id = TRB_TO_STREAM_ID(trb->generic.field[2]);
896         dev = xhci->devs[slot_id];
897
898         ep_ring = xhci_stream_id_to_ring(dev, ep_index, stream_id);
899         if (!ep_ring) {
900                 xhci_warn(xhci, "WARN Set TR deq ptr command for "
901                                 "freed stream ID %u\n",
902                                 stream_id);
903                 /* XXX: Harmless??? */
904                 dev->eps[ep_index].ep_state &= ~SET_DEQ_PENDING;
905                 return;
906         }
907
908         ep_ctx = xhci_get_ep_ctx(xhci, dev->out_ctx, ep_index);
909         slot_ctx = xhci_get_slot_ctx(xhci, dev->out_ctx);
910
911         if (GET_COMP_CODE(event->status) != COMP_SUCCESS) {
912                 unsigned int ep_state;
913                 unsigned int slot_state;
914
915                 switch (GET_COMP_CODE(event->status)) {
916                 case COMP_TRB_ERR:
917                         xhci_warn(xhci, "WARN Set TR Deq Ptr cmd invalid because "
918                                         "of stream ID configuration\n");
919                         break;
920                 case COMP_CTX_STATE:
921                         xhci_warn(xhci, "WARN Set TR Deq Ptr cmd failed due "
922                                         "to incorrect slot or ep state.\n");
923                         ep_state = ep_ctx->ep_info;
924                         ep_state &= EP_STATE_MASK;
925                         slot_state = slot_ctx->dev_state;
926                         slot_state = GET_SLOT_STATE(slot_state);
927                         xhci_dbg(xhci, "Slot state = %u, EP state = %u\n",
928                                         slot_state, ep_state);
929                         break;
930                 case COMP_EBADSLT:
931                         xhci_warn(xhci, "WARN Set TR Deq Ptr cmd failed because "
932                                         "slot %u was not enabled.\n", slot_id);
933                         break;
934                 default:
935                         xhci_warn(xhci, "WARN Set TR Deq Ptr cmd with unknown "
936                                         "completion code of %u.\n",
937                                         GET_COMP_CODE(event->status));
938                         break;
939                 }
940                 /* OK what do we do now?  The endpoint state is hosed, and we
941                  * should never get to this point if the synchronization between
942                  * queueing, and endpoint state are correct.  This might happen
943                  * if the device gets disconnected after we've finished
944                  * cancelling URBs, which might not be an error...
945                  */
946         } else {
947                 xhci_dbg(xhci, "Successful Set TR Deq Ptr cmd, deq = @%08llx\n",
948                                 ep_ctx->deq);
949         }
950
951         dev->eps[ep_index].ep_state &= ~SET_DEQ_PENDING;
952         /* Restart any rings with pending URBs */
953         ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
954 }
955
956 static void handle_reset_ep_completion(struct xhci_hcd *xhci,
957                 struct xhci_event_cmd *event,
958                 union xhci_trb *trb)
959 {
960         int slot_id;
961         unsigned int ep_index;
962
963         slot_id = TRB_TO_SLOT_ID(trb->generic.field[3]);
964         ep_index = TRB_TO_EP_INDEX(trb->generic.field[3]);
965         /* This command will only fail if the endpoint wasn't halted,
966          * but we don't care.
967          */
968         xhci_dbg(xhci, "Ignoring reset ep completion code of %u\n",
969                         (unsigned int) GET_COMP_CODE(event->status));
970
971         /* HW with the reset endpoint quirk needs to have a configure endpoint
972          * command complete before the endpoint can be used.  Queue that here
973          * because the HW can't handle two commands being queued in a row.
974          */
975         if (xhci->quirks & XHCI_RESET_EP_QUIRK) {
976                 xhci_dbg(xhci, "Queueing configure endpoint command\n");
977                 xhci_queue_configure_endpoint(xhci,
978                                 xhci->devs[slot_id]->in_ctx->dma, slot_id,
979                                 false);
980                 xhci_ring_cmd_db(xhci);
981         } else {
982                 /* Clear our internal halted state and restart the ring(s) */
983                 xhci->devs[slot_id]->eps[ep_index].ep_state &= ~EP_HALTED;
984                 ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
985         }
986 }
987
988 /* Check to see if a command in the device's command queue matches this one.
989  * Signal the completion or free the command, and return 1.  Return 0 if the
990  * completed command isn't at the head of the command list.
991  */
992 static int handle_cmd_in_cmd_wait_list(struct xhci_hcd *xhci,
993                 struct xhci_virt_device *virt_dev,
994                 struct xhci_event_cmd *event)
995 {
996         struct xhci_command *command;
997
998         if (list_empty(&virt_dev->cmd_list))
999                 return 0;
1000
1001         command = list_entry(virt_dev->cmd_list.next,
1002                         struct xhci_command, cmd_list);
1003         if (xhci->cmd_ring->dequeue != command->command_trb)
1004                 return 0;
1005
1006         command->status =
1007                 GET_COMP_CODE(event->status);
1008         list_del(&command->cmd_list);
1009         if (command->completion)
1010                 complete(command->completion);
1011         else
1012                 xhci_free_command(xhci, command);
1013         return 1;
1014 }
1015
1016 static void handle_cmd_completion(struct xhci_hcd *xhci,
1017                 struct xhci_event_cmd *event)
1018 {
1019         int slot_id = TRB_TO_SLOT_ID(event->flags);
1020         u64 cmd_dma;
1021         dma_addr_t cmd_dequeue_dma;
1022         struct xhci_input_control_ctx *ctrl_ctx;
1023         struct xhci_virt_device *virt_dev;
1024         unsigned int ep_index;
1025         struct xhci_ring *ep_ring;
1026         unsigned int ep_state;
1027
1028         cmd_dma = event->cmd_trb;
1029         cmd_dequeue_dma = xhci_trb_virt_to_dma(xhci->cmd_ring->deq_seg,
1030                         xhci->cmd_ring->dequeue);
1031         /* Is the command ring deq ptr out of sync with the deq seg ptr? */
1032         if (cmd_dequeue_dma == 0) {
1033                 xhci->error_bitmask |= 1 << 4;
1034                 return;
1035         }
1036         /* Does the DMA address match our internal dequeue pointer address? */
1037         if (cmd_dma != (u64) cmd_dequeue_dma) {
1038                 xhci->error_bitmask |= 1 << 5;
1039                 return;
1040         }
1041         switch (xhci->cmd_ring->dequeue->generic.field[3] & TRB_TYPE_BITMASK) {
1042         case TRB_TYPE(TRB_ENABLE_SLOT):
1043                 if (GET_COMP_CODE(event->status) == COMP_SUCCESS)
1044                         xhci->slot_id = slot_id;
1045                 else
1046                         xhci->slot_id = 0;
1047                 complete(&xhci->addr_dev);
1048                 break;
1049         case TRB_TYPE(TRB_DISABLE_SLOT):
1050                 if (xhci->devs[slot_id])
1051                         xhci_free_virt_device(xhci, slot_id);
1052                 break;
1053         case TRB_TYPE(TRB_CONFIG_EP):
1054                 virt_dev = xhci->devs[slot_id];
1055                 if (handle_cmd_in_cmd_wait_list(xhci, virt_dev, event))
1056                         break;
1057                 /*
1058                  * Configure endpoint commands can come from the USB core
1059                  * configuration or alt setting changes, or because the HW
1060                  * needed an extra configure endpoint command after a reset
1061                  * endpoint command or streams were being configured.
1062                  * If the command was for a halted endpoint, the xHCI driver
1063                  * is not waiting on the configure endpoint command.
1064                  */
1065                 ctrl_ctx = xhci_get_input_control_ctx(xhci,
1066                                 virt_dev->in_ctx);
1067                 /* Input ctx add_flags are the endpoint index plus one */
1068                 ep_index = xhci_last_valid_endpoint(ctrl_ctx->add_flags) - 1;
1069                 /* A usb_set_interface() call directly after clearing a halted
1070                  * condition may race on this quirky hardware.  Not worth
1071                  * worrying about, since this is prototype hardware.  Not sure
1072                  * if this will work for streams, but streams support was
1073                  * untested on this prototype.
1074                  */
1075                 if (xhci->quirks & XHCI_RESET_EP_QUIRK &&
1076                                 ep_index != (unsigned int) -1 &&
1077                                 ctrl_ctx->add_flags - SLOT_FLAG ==
1078                                         ctrl_ctx->drop_flags) {
1079                         ep_ring = xhci->devs[slot_id]->eps[ep_index].ring;
1080                         ep_state = xhci->devs[slot_id]->eps[ep_index].ep_state;
1081                         if (!(ep_state & EP_HALTED))
1082                                 goto bandwidth_change;
1083                         xhci_dbg(xhci, "Completed config ep cmd - "
1084                                         "last ep index = %d, state = %d\n",
1085                                         ep_index, ep_state);
1086                         /* Clear internal halted state and restart ring(s) */
1087                         xhci->devs[slot_id]->eps[ep_index].ep_state &=
1088                                 ~EP_HALTED;
1089                         ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
1090                         break;
1091                 }
1092 bandwidth_change:
1093                 xhci_dbg(xhci, "Completed config ep cmd\n");
1094                 xhci->devs[slot_id]->cmd_status =
1095                         GET_COMP_CODE(event->status);
1096                 complete(&xhci->devs[slot_id]->cmd_completion);
1097                 break;
1098         case TRB_TYPE(TRB_EVAL_CONTEXT):
1099                 virt_dev = xhci->devs[slot_id];
1100                 if (handle_cmd_in_cmd_wait_list(xhci, virt_dev, event))
1101                         break;
1102                 xhci->devs[slot_id]->cmd_status = GET_COMP_CODE(event->status);
1103                 complete(&xhci->devs[slot_id]->cmd_completion);
1104                 break;
1105         case TRB_TYPE(TRB_ADDR_DEV):
1106                 xhci->devs[slot_id]->cmd_status = GET_COMP_CODE(event->status);
1107                 complete(&xhci->addr_dev);
1108                 break;
1109         case TRB_TYPE(TRB_STOP_RING):
1110                 handle_stopped_endpoint(xhci, xhci->cmd_ring->dequeue, event);
1111                 break;
1112         case TRB_TYPE(TRB_SET_DEQ):
1113                 handle_set_deq_completion(xhci, event, xhci->cmd_ring->dequeue);
1114                 break;
1115         case TRB_TYPE(TRB_CMD_NOOP):
1116                 ++xhci->noops_handled;
1117                 break;
1118         case TRB_TYPE(TRB_RESET_EP):
1119                 handle_reset_ep_completion(xhci, event, xhci->cmd_ring->dequeue);
1120                 break;
1121         case TRB_TYPE(TRB_RESET_DEV):
1122                 xhci_dbg(xhci, "Completed reset device command.\n");
1123                 slot_id = TRB_TO_SLOT_ID(
1124                                 xhci->cmd_ring->dequeue->generic.field[3]);
1125                 virt_dev = xhci->devs[slot_id];
1126                 if (virt_dev)
1127                         handle_cmd_in_cmd_wait_list(xhci, virt_dev, event);
1128                 else
1129                         xhci_warn(xhci, "Reset device command completion "
1130                                         "for disabled slot %u\n", slot_id);
1131                 break;
1132         case TRB_TYPE(TRB_NEC_GET_FW):
1133                 if (!(xhci->quirks & XHCI_NEC_HOST)) {
1134                         xhci->error_bitmask |= 1 << 6;
1135                         break;
1136                 }
1137                 xhci_dbg(xhci, "NEC firmware version %2x.%02x\n",
1138                                 NEC_FW_MAJOR(event->status),
1139                                 NEC_FW_MINOR(event->status));
1140                 break;
1141         default:
1142                 /* Skip over unknown commands on the event ring */
1143                 xhci->error_bitmask |= 1 << 6;
1144                 break;
1145         }
1146         inc_deq(xhci, xhci->cmd_ring, false);
1147 }
1148
1149 static void handle_vendor_event(struct xhci_hcd *xhci,
1150                 union xhci_trb *event)
1151 {
1152         u32 trb_type;
1153
1154         trb_type = TRB_FIELD_TO_TYPE(event->generic.field[3]);
1155         xhci_dbg(xhci, "Vendor specific event TRB type = %u\n", trb_type);
1156         if (trb_type == TRB_NEC_CMD_COMP && (xhci->quirks & XHCI_NEC_HOST))
1157                 handle_cmd_completion(xhci, &event->event_cmd);
1158 }
1159
1160 static void handle_port_status(struct xhci_hcd *xhci,
1161                 union xhci_trb *event)
1162 {
1163         struct usb_hcd *hcd = xhci_to_hcd(xhci);
1164         u32 port_id;
1165         u32 temp, temp1;
1166         u32 __iomem *addr;
1167         int ports;
1168         int slot_id;
1169
1170         /* Port status change events always have a successful completion code */
1171         if (GET_COMP_CODE(event->generic.field[2]) != COMP_SUCCESS) {
1172                 xhci_warn(xhci, "WARN: xHC returned failed port status event\n");
1173                 xhci->error_bitmask |= 1 << 8;
1174         }
1175         port_id = GET_PORT_ID(event->generic.field[0]);
1176         xhci_dbg(xhci, "Port Status Change Event for port %d\n", port_id);
1177
1178         ports = HCS_MAX_PORTS(xhci->hcs_params1);
1179         if ((port_id <= 0) || (port_id > ports)) {
1180                 xhci_warn(xhci, "Invalid port id %d\n", port_id);
1181                 goto cleanup;
1182         }
1183
1184         addr = &xhci->op_regs->port_status_base + NUM_PORT_REGS * (port_id - 1);
1185         temp = xhci_readl(xhci, addr);
1186         if (hcd->state == HC_STATE_SUSPENDED) {
1187                 xhci_dbg(xhci, "resume root hub\n");
1188                 usb_hcd_resume_root_hub(hcd);
1189         }
1190
1191         if ((temp & PORT_PLC) && (temp & PORT_PLS_MASK) == XDEV_RESUME) {
1192                 xhci_dbg(xhci, "port resume event for port %d\n", port_id);
1193
1194                 temp1 = xhci_readl(xhci, &xhci->op_regs->command);
1195                 if (!(temp1 & CMD_RUN)) {
1196                         xhci_warn(xhci, "xHC is not running.\n");
1197                         goto cleanup;
1198                 }
1199
1200                 if (DEV_SUPERSPEED(temp)) {
1201                         xhci_dbg(xhci, "resume SS port %d\n", port_id);
1202                         temp = xhci_port_state_to_neutral(temp);
1203                         temp &= ~PORT_PLS_MASK;
1204                         temp |= PORT_LINK_STROBE | XDEV_U0;
1205                         xhci_writel(xhci, temp, addr);
1206                         slot_id = xhci_find_slot_id_by_port(xhci, port_id);
1207                         if (!slot_id) {
1208                                 xhci_dbg(xhci, "slot_id is zero\n");
1209                                 goto cleanup;
1210                         }
1211                         xhci_ring_device(xhci, slot_id);
1212                         xhci_dbg(xhci, "resume SS port %d finished\n", port_id);
1213                         /* Clear PORT_PLC */
1214                         temp = xhci_readl(xhci, addr);
1215                         temp = xhci_port_state_to_neutral(temp);
1216                         temp |= PORT_PLC;
1217                         xhci_writel(xhci, temp, addr);
1218                 } else {
1219                         xhci_dbg(xhci, "resume HS port %d\n", port_id);
1220                         xhci->resume_done[port_id - 1] = jiffies +
1221                                 msecs_to_jiffies(20);
1222                         mod_timer(&hcd->rh_timer,
1223                                   xhci->resume_done[port_id - 1]);
1224                         /* Do the rest in GetPortStatus */
1225                 }
1226         }
1227
1228 cleanup:
1229         /* Update event ring dequeue pointer before dropping the lock */
1230         inc_deq(xhci, xhci->event_ring, true);
1231
1232         spin_unlock(&xhci->lock);
1233         /* Pass this up to the core */
1234         usb_hcd_poll_rh_status(xhci_to_hcd(xhci));
1235         spin_lock(&xhci->lock);
1236 }
1237
1238 /*
1239  * This TD is defined by the TRBs starting at start_trb in start_seg and ending
1240  * at end_trb, which may be in another segment.  If the suspect DMA address is a
1241  * TRB in this TD, this function returns that TRB's segment.  Otherwise it
1242  * returns 0.
1243  */
1244 struct xhci_segment *trb_in_td(struct xhci_segment *start_seg,
1245                 union xhci_trb  *start_trb,
1246                 union xhci_trb  *end_trb,
1247                 dma_addr_t      suspect_dma)
1248 {
1249         dma_addr_t start_dma;
1250         dma_addr_t end_seg_dma;
1251         dma_addr_t end_trb_dma;
1252         struct xhci_segment *cur_seg;
1253
1254         start_dma = xhci_trb_virt_to_dma(start_seg, start_trb);
1255         cur_seg = start_seg;
1256
1257         do {
1258                 if (start_dma == 0)
1259                         return NULL;
1260                 /* We may get an event for a Link TRB in the middle of a TD */
1261                 end_seg_dma = xhci_trb_virt_to_dma(cur_seg,
1262                                 &cur_seg->trbs[TRBS_PER_SEGMENT - 1]);
1263                 /* If the end TRB isn't in this segment, this is set to 0 */
1264                 end_trb_dma = xhci_trb_virt_to_dma(cur_seg, end_trb);
1265
1266                 if (end_trb_dma > 0) {
1267                         /* The end TRB is in this segment, so suspect should be here */
1268                         if (start_dma <= end_trb_dma) {
1269                                 if (suspect_dma >= start_dma && suspect_dma <= end_trb_dma)
1270                                         return cur_seg;
1271                         } else {
1272                                 /* Case for one segment with
1273                                  * a TD wrapped around to the top
1274                                  */
1275                                 if ((suspect_dma >= start_dma &&
1276                                                         suspect_dma <= end_seg_dma) ||
1277                                                 (suspect_dma >= cur_seg->dma &&
1278                                                  suspect_dma <= end_trb_dma))
1279                                         return cur_seg;
1280                         }
1281                         return NULL;
1282                 } else {
1283                         /* Might still be somewhere in this segment */
1284                         if (suspect_dma >= start_dma && suspect_dma <= end_seg_dma)
1285                                 return cur_seg;
1286                 }
1287                 cur_seg = cur_seg->next;
1288                 start_dma = xhci_trb_virt_to_dma(cur_seg, &cur_seg->trbs[0]);
1289         } while (cur_seg != start_seg);
1290
1291         return NULL;
1292 }
1293
1294 static void xhci_cleanup_halted_endpoint(struct xhci_hcd *xhci,
1295                 unsigned int slot_id, unsigned int ep_index,
1296                 unsigned int stream_id,
1297                 struct xhci_td *td, union xhci_trb *event_trb)
1298 {
1299         struct xhci_virt_ep *ep = &xhci->devs[slot_id]->eps[ep_index];
1300         ep->ep_state |= EP_HALTED;
1301         ep->stopped_td = td;
1302         ep->stopped_trb = event_trb;
1303         ep->stopped_stream = stream_id;
1304
1305         xhci_queue_reset_ep(xhci, slot_id, ep_index);
1306         xhci_cleanup_stalled_ring(xhci, td->urb->dev, ep_index);
1307
1308         ep->stopped_td = NULL;
1309         ep->stopped_trb = NULL;
1310         ep->stopped_stream = 0;
1311
1312         xhci_ring_cmd_db(xhci);
1313 }
1314
1315 /* Check if an error has halted the endpoint ring.  The class driver will
1316  * cleanup the halt for a non-default control endpoint if we indicate a stall.
1317  * However, a babble and other errors also halt the endpoint ring, and the class
1318  * driver won't clear the halt in that case, so we need to issue a Set Transfer
1319  * Ring Dequeue Pointer command manually.
1320  */
1321 static int xhci_requires_manual_halt_cleanup(struct xhci_hcd *xhci,
1322                 struct xhci_ep_ctx *ep_ctx,
1323                 unsigned int trb_comp_code)
1324 {
1325         /* TRB completion codes that may require a manual halt cleanup */
1326         if (trb_comp_code == COMP_TX_ERR ||
1327                         trb_comp_code == COMP_BABBLE ||
1328                         trb_comp_code == COMP_SPLIT_ERR)
1329                 /* The 0.96 spec says a babbling control endpoint
1330                  * is not halted. The 0.96 spec says it is.  Some HW
1331                  * claims to be 0.95 compliant, but it halts the control
1332                  * endpoint anyway.  Check if a babble halted the
1333                  * endpoint.
1334                  */
1335                 if ((ep_ctx->ep_info & EP_STATE_MASK) == EP_STATE_HALTED)
1336                         return 1;
1337
1338         return 0;
1339 }
1340
1341 int xhci_is_vendor_info_code(struct xhci_hcd *xhci, unsigned int trb_comp_code)
1342 {
1343         if (trb_comp_code >= 224 && trb_comp_code <= 255) {
1344                 /* Vendor defined "informational" completion code,
1345                  * treat as not-an-error.
1346                  */
1347                 xhci_dbg(xhci, "Vendor defined info completion code %u\n",
1348                                 trb_comp_code);
1349                 xhci_dbg(xhci, "Treating code as success.\n");
1350                 return 1;
1351         }
1352         return 0;
1353 }
1354
1355 /*
1356  * Finish the td processing, remove the td from td list;
1357  * Return 1 if the urb can be given back.
1358  */
1359 static int finish_td(struct xhci_hcd *xhci, struct xhci_td *td,
1360         union xhci_trb *event_trb, struct xhci_transfer_event *event,
1361         struct xhci_virt_ep *ep, int *status, bool skip)
1362 {
1363         struct xhci_virt_device *xdev;
1364         struct xhci_ring *ep_ring;
1365         unsigned int slot_id;
1366         int ep_index;
1367         struct urb *urb = NULL;
1368         struct xhci_ep_ctx *ep_ctx;
1369         int ret = 0;
1370         struct urb_priv *urb_priv;
1371         u32 trb_comp_code;
1372
1373         slot_id = TRB_TO_SLOT_ID(event->flags);
1374         xdev = xhci->devs[slot_id];
1375         ep_index = TRB_TO_EP_ID(event->flags) - 1;
1376         ep_ring = xhci_dma_to_transfer_ring(ep, event->buffer);
1377         ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index);
1378         trb_comp_code = GET_COMP_CODE(event->transfer_len);
1379
1380         if (skip)
1381                 goto td_cleanup;
1382
1383         if (trb_comp_code == COMP_STOP_INVAL ||
1384                         trb_comp_code == COMP_STOP) {
1385                 /* The Endpoint Stop Command completion will take care of any
1386                  * stopped TDs.  A stopped TD may be restarted, so don't update
1387                  * the ring dequeue pointer or take this TD off any lists yet.
1388                  */
1389                 ep->stopped_td = td;
1390                 ep->stopped_trb = event_trb;
1391                 return 0;
1392         } else {
1393                 if (trb_comp_code == COMP_STALL) {
1394                         /* The transfer is completed from the driver's
1395                          * perspective, but we need to issue a set dequeue
1396                          * command for this stalled endpoint to move the dequeue
1397                          * pointer past the TD.  We can't do that here because
1398                          * the halt condition must be cleared first.  Let the
1399                          * USB class driver clear the stall later.
1400                          */
1401                         ep->stopped_td = td;
1402                         ep->stopped_trb = event_trb;
1403                         ep->stopped_stream = ep_ring->stream_id;
1404                 } else if (xhci_requires_manual_halt_cleanup(xhci,
1405                                         ep_ctx, trb_comp_code)) {
1406                         /* Other types of errors halt the endpoint, but the
1407                          * class driver doesn't call usb_reset_endpoint() unless
1408                          * the error is -EPIPE.  Clear the halted status in the
1409                          * xHCI hardware manually.
1410                          */
1411                         xhci_cleanup_halted_endpoint(xhci,
1412                                         slot_id, ep_index, ep_ring->stream_id,
1413                                         td, event_trb);
1414                 } else {
1415                         /* Update ring dequeue pointer */
1416                         while (ep_ring->dequeue != td->last_trb)
1417                                 inc_deq(xhci, ep_ring, false);
1418                         inc_deq(xhci, ep_ring, false);
1419                 }
1420
1421 td_cleanup:
1422                 /* Clean up the endpoint's TD list */
1423                 urb = td->urb;
1424                 urb_priv = urb->hcpriv;
1425
1426                 /* Do one last check of the actual transfer length.
1427                  * If the host controller said we transferred more data than
1428                  * the buffer length, urb->actual_length will be a very big
1429                  * number (since it's unsigned).  Play it safe and say we didn't
1430                  * transfer anything.
1431                  */
1432                 if (urb->actual_length > urb->transfer_buffer_length) {
1433                         xhci_warn(xhci, "URB transfer length is wrong, "
1434                                         "xHC issue? req. len = %u, "
1435                                         "act. len = %u\n",
1436                                         urb->transfer_buffer_length,
1437                                         urb->actual_length);
1438                         urb->actual_length = 0;
1439                         if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
1440                                 *status = -EREMOTEIO;
1441                         else
1442                                 *status = 0;
1443                 }
1444                 list_del(&td->td_list);
1445                 /* Was this TD slated to be cancelled but completed anyway? */
1446                 if (!list_empty(&td->cancelled_td_list))
1447                         list_del(&td->cancelled_td_list);
1448
1449                 urb_priv->td_cnt++;
1450                 /* Giveback the urb when all the tds are completed */
1451                 if (urb_priv->td_cnt == urb_priv->length)
1452                         ret = 1;
1453         }
1454
1455         return ret;
1456 }
1457
1458 /*
1459  * Process control tds, update urb status and actual_length.
1460  */
1461 static int process_ctrl_td(struct xhci_hcd *xhci, struct xhci_td *td,
1462         union xhci_trb *event_trb, struct xhci_transfer_event *event,
1463         struct xhci_virt_ep *ep, int *status)
1464 {
1465         struct xhci_virt_device *xdev;
1466         struct xhci_ring *ep_ring;
1467         unsigned int slot_id;
1468         int ep_index;
1469         struct xhci_ep_ctx *ep_ctx;
1470         u32 trb_comp_code;
1471
1472         slot_id = TRB_TO_SLOT_ID(event->flags);
1473         xdev = xhci->devs[slot_id];
1474         ep_index = TRB_TO_EP_ID(event->flags) - 1;
1475         ep_ring = xhci_dma_to_transfer_ring(ep, event->buffer);
1476         ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index);
1477         trb_comp_code = GET_COMP_CODE(event->transfer_len);
1478
1479         xhci_debug_trb(xhci, xhci->event_ring->dequeue);
1480         switch (trb_comp_code) {
1481         case COMP_SUCCESS:
1482                 if (event_trb == ep_ring->dequeue) {
1483                         xhci_warn(xhci, "WARN: Success on ctrl setup TRB "
1484                                         "without IOC set??\n");
1485                         *status = -ESHUTDOWN;
1486                 } else if (event_trb != td->last_trb) {
1487                         xhci_warn(xhci, "WARN: Success on ctrl data TRB "
1488                                         "without IOC set??\n");
1489                         *status = -ESHUTDOWN;
1490                 } else {
1491                         xhci_dbg(xhci, "Successful control transfer!\n");
1492                         *status = 0;
1493                 }
1494                 break;
1495         case COMP_SHORT_TX:
1496                 xhci_warn(xhci, "WARN: short transfer on control ep\n");
1497                 if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
1498                         *status = -EREMOTEIO;
1499                 else
1500                         *status = 0;
1501                 break;
1502         default:
1503                 if (!xhci_requires_manual_halt_cleanup(xhci,
1504                                         ep_ctx, trb_comp_code))
1505                         break;
1506                 xhci_dbg(xhci, "TRB error code %u, "
1507                                 "halted endpoint index = %u\n",
1508                                 trb_comp_code, ep_index);
1509                 /* else fall through */
1510         case COMP_STALL:
1511                 /* Did we transfer part of the data (middle) phase? */
1512                 if (event_trb != ep_ring->dequeue &&
1513                                 event_trb != td->last_trb)
1514                         td->urb->actual_length =
1515                                 td->urb->transfer_buffer_length
1516                                 - TRB_LEN(event->transfer_len);
1517                 else
1518                         td->urb->actual_length = 0;
1519
1520                 xhci_cleanup_halted_endpoint(xhci,
1521                         slot_id, ep_index, 0, td, event_trb);
1522                 return finish_td(xhci, td, event_trb, event, ep, status, true);
1523         }
1524         /*
1525          * Did we transfer any data, despite the errors that might have
1526          * happened?  I.e. did we get past the setup stage?
1527          */
1528         if (event_trb != ep_ring->dequeue) {
1529                 /* The event was for the status stage */
1530                 if (event_trb == td->last_trb) {
1531                         if (td->urb->actual_length != 0) {
1532                                 /* Don't overwrite a previously set error code
1533                                  */
1534                                 if ((*status == -EINPROGRESS || *status == 0) &&
1535                                                 (td->urb->transfer_flags
1536                                                  & URB_SHORT_NOT_OK))
1537                                         /* Did we already see a short data
1538                                          * stage? */
1539                                         *status = -EREMOTEIO;
1540                         } else {
1541                                 td->urb->actual_length =
1542                                         td->urb->transfer_buffer_length;
1543                         }
1544                 } else {
1545                 /* Maybe the event was for the data stage? */
1546                         if (trb_comp_code != COMP_STOP_INVAL) {
1547                                 /* We didn't stop on a link TRB in the middle */
1548                                 td->urb->actual_length =
1549                                         td->urb->transfer_buffer_length -
1550                                         TRB_LEN(event->transfer_len);
1551                                 xhci_dbg(xhci, "Waiting for status "
1552                                                 "stage event\n");
1553                                 return 0;
1554                         }
1555                 }
1556         }
1557
1558         return finish_td(xhci, td, event_trb, event, ep, status, false);
1559 }
1560
1561 /*
1562  * Process isochronous tds, update urb packet status and actual_length.
1563  */
1564 static int process_isoc_td(struct xhci_hcd *xhci, struct xhci_td *td,
1565         union xhci_trb *event_trb, struct xhci_transfer_event *event,
1566         struct xhci_virt_ep *ep, int *status)
1567 {
1568         struct xhci_ring *ep_ring;
1569         struct urb_priv *urb_priv;
1570         int idx;
1571         int len = 0;
1572         int skip_td = 0;
1573         union xhci_trb *cur_trb;
1574         struct xhci_segment *cur_seg;
1575         u32 trb_comp_code;
1576
1577         ep_ring = xhci_dma_to_transfer_ring(ep, event->buffer);
1578         trb_comp_code = GET_COMP_CODE(event->transfer_len);
1579         urb_priv = td->urb->hcpriv;
1580         idx = urb_priv->td_cnt;
1581
1582         if (ep->skip) {
1583                 /* The transfer is partly done */
1584                 *status = -EXDEV;
1585                 td->urb->iso_frame_desc[idx].status = -EXDEV;
1586         } else {
1587                 /* handle completion code */
1588                 switch (trb_comp_code) {
1589                 case COMP_SUCCESS:
1590                         td->urb->iso_frame_desc[idx].status = 0;
1591                         xhci_dbg(xhci, "Successful isoc transfer!\n");
1592                         break;
1593                 case COMP_SHORT_TX:
1594                         if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
1595                                 td->urb->iso_frame_desc[idx].status =
1596                                          -EREMOTEIO;
1597                         else
1598                                 td->urb->iso_frame_desc[idx].status = 0;
1599                         break;
1600                 case COMP_BW_OVER:
1601                         td->urb->iso_frame_desc[idx].status = -ECOMM;
1602                         skip_td = 1;
1603                         break;
1604                 case COMP_BUFF_OVER:
1605                 case COMP_BABBLE:
1606                         td->urb->iso_frame_desc[idx].status = -EOVERFLOW;
1607                         skip_td = 1;
1608                         break;
1609                 case COMP_STALL:
1610                         td->urb->iso_frame_desc[idx].status = -EPROTO;
1611                         skip_td = 1;
1612                         break;
1613                 case COMP_STOP:
1614                 case COMP_STOP_INVAL:
1615                         break;
1616                 default:
1617                         td->urb->iso_frame_desc[idx].status = -1;
1618                         break;
1619                 }
1620         }
1621
1622         /* calc actual length */
1623         if (ep->skip) {
1624                 td->urb->iso_frame_desc[idx].actual_length = 0;
1625                 /* Update ring dequeue pointer */
1626                 while (ep_ring->dequeue != td->last_trb)
1627                         inc_deq(xhci, ep_ring, false);
1628                 inc_deq(xhci, ep_ring, false);
1629                 return finish_td(xhci, td, event_trb, event, ep, status, true);
1630         }
1631
1632         if (trb_comp_code == COMP_SUCCESS || skip_td == 1) {
1633                 td->urb->iso_frame_desc[idx].actual_length =
1634                         td->urb->iso_frame_desc[idx].length;
1635                 td->urb->actual_length +=
1636                         td->urb->iso_frame_desc[idx].length;
1637         } else {
1638                 for (cur_trb = ep_ring->dequeue,
1639                      cur_seg = ep_ring->deq_seg; cur_trb != event_trb;
1640                      next_trb(xhci, ep_ring, &cur_seg, &cur_trb)) {
1641                         if ((cur_trb->generic.field[3] &
1642                          TRB_TYPE_BITMASK) != TRB_TYPE(TRB_TR_NOOP) &&
1643                             (cur_trb->generic.field[3] &
1644                          TRB_TYPE_BITMASK) != TRB_TYPE(TRB_LINK))
1645                                 len +=
1646                                     TRB_LEN(cur_trb->generic.field[2]);
1647                 }
1648                 len += TRB_LEN(cur_trb->generic.field[2]) -
1649                         TRB_LEN(event->transfer_len);
1650
1651                 if (trb_comp_code != COMP_STOP_INVAL) {
1652                         td->urb->iso_frame_desc[idx].actual_length = len;
1653                         td->urb->actual_length += len;
1654                 }
1655         }
1656
1657         if ((idx == urb_priv->length - 1) && *status == -EINPROGRESS)
1658                 *status = 0;
1659
1660         return finish_td(xhci, td, event_trb, event, ep, status, false);
1661 }
1662
1663 /*
1664  * Process bulk and interrupt tds, update urb status and actual_length.
1665  */
1666 static int process_bulk_intr_td(struct xhci_hcd *xhci, struct xhci_td *td,
1667         union xhci_trb *event_trb, struct xhci_transfer_event *event,
1668         struct xhci_virt_ep *ep, int *status)
1669 {
1670         struct xhci_ring *ep_ring;
1671         union xhci_trb *cur_trb;
1672         struct xhci_segment *cur_seg;
1673         u32 trb_comp_code;
1674
1675         ep_ring = xhci_dma_to_transfer_ring(ep, event->buffer);
1676         trb_comp_code = GET_COMP_CODE(event->transfer_len);
1677
1678         switch (trb_comp_code) {
1679         case COMP_SUCCESS:
1680                 /* Double check that the HW transferred everything. */
1681                 if (event_trb != td->last_trb) {
1682                         xhci_warn(xhci, "WARN Successful completion "
1683                                         "on short TX\n");
1684                         if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
1685                                 *status = -EREMOTEIO;
1686                         else
1687                                 *status = 0;
1688                 } else {
1689                         if (usb_endpoint_xfer_bulk(&td->urb->ep->desc))
1690                                 xhci_dbg(xhci, "Successful bulk "
1691                                                 "transfer!\n");
1692                         else
1693                                 xhci_dbg(xhci, "Successful interrupt "
1694                                                 "transfer!\n");
1695                         *status = 0;
1696                 }
1697                 break;
1698         case COMP_SHORT_TX:
1699                 if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
1700                         *status = -EREMOTEIO;
1701                 else
1702                         *status = 0;
1703                 break;
1704         default:
1705                 /* Others already handled above */
1706                 break;
1707         }
1708         xhci_dbg(xhci, "ep %#x - asked for %d bytes, "
1709                         "%d bytes untransferred\n",
1710                         td->urb->ep->desc.bEndpointAddress,
1711                         td->urb->transfer_buffer_length,
1712                         TRB_LEN(event->transfer_len));
1713         /* Fast path - was this the last TRB in the TD for this URB? */
1714         if (event_trb == td->last_trb) {
1715                 if (TRB_LEN(event->transfer_len) != 0) {
1716                         td->urb->actual_length =
1717                                 td->urb->transfer_buffer_length -
1718                                 TRB_LEN(event->transfer_len);
1719                         if (td->urb->transfer_buffer_length <
1720                                         td->urb->actual_length) {
1721                                 xhci_warn(xhci, "HC gave bad length "
1722                                                 "of %d bytes left\n",
1723                                                 TRB_LEN(event->transfer_len));
1724                                 td->urb->actual_length = 0;
1725                                 if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
1726                                         *status = -EREMOTEIO;
1727                                 else
1728                                         *status = 0;
1729                         }
1730                         /* Don't overwrite a previously set error code */
1731                         if (*status == -EINPROGRESS) {
1732                                 if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
1733                                         *status = -EREMOTEIO;
1734                                 else
1735                                         *status = 0;
1736                         }
1737                 } else {
1738                         td->urb->actual_length =
1739                                 td->urb->transfer_buffer_length;
1740                         /* Ignore a short packet completion if the
1741                          * untransferred length was zero.
1742                          */
1743                         if (*status == -EREMOTEIO)
1744                                 *status = 0;
1745                 }
1746         } else {
1747                 /* Slow path - walk the list, starting from the dequeue
1748                  * pointer, to get the actual length transferred.
1749                  */
1750                 td->urb->actual_length = 0;
1751                 for (cur_trb = ep_ring->dequeue, cur_seg = ep_ring->deq_seg;
1752                                 cur_trb != event_trb;
1753                                 next_trb(xhci, ep_ring, &cur_seg, &cur_trb)) {
1754                         if ((cur_trb->generic.field[3] &
1755                          TRB_TYPE_BITMASK) != TRB_TYPE(TRB_TR_NOOP) &&
1756                             (cur_trb->generic.field[3] &
1757                          TRB_TYPE_BITMASK) != TRB_TYPE(TRB_LINK))
1758                                 td->urb->actual_length +=
1759                                         TRB_LEN(cur_trb->generic.field[2]);
1760                 }
1761                 /* If the ring didn't stop on a Link or No-op TRB, add
1762                  * in the actual bytes transferred from the Normal TRB
1763                  */
1764                 if (trb_comp_code != COMP_STOP_INVAL)
1765                         td->urb->actual_length +=
1766                                 TRB_LEN(cur_trb->generic.field[2]) -
1767                                 TRB_LEN(event->transfer_len);
1768         }
1769
1770         return finish_td(xhci, td, event_trb, event, ep, status, false);
1771 }
1772
1773 /*
1774  * If this function returns an error condition, it means it got a Transfer
1775  * event with a corrupted Slot ID, Endpoint ID, or TRB DMA address.
1776  * At this point, the host controller is probably hosed and should be reset.
1777  */
1778 static int handle_tx_event(struct xhci_hcd *xhci,
1779                 struct xhci_transfer_event *event)
1780 {
1781         struct xhci_virt_device *xdev;
1782         struct xhci_virt_ep *ep;
1783         struct xhci_ring *ep_ring;
1784         unsigned int slot_id;
1785         int ep_index;
1786         struct xhci_td *td = NULL;
1787         dma_addr_t event_dma;
1788         struct xhci_segment *event_seg;
1789         union xhci_trb *event_trb;
1790         struct urb *urb = NULL;
1791         int status = -EINPROGRESS;
1792         struct urb_priv *urb_priv;
1793         struct xhci_ep_ctx *ep_ctx;
1794         u32 trb_comp_code;
1795         int ret = 0;
1796
1797         slot_id = TRB_TO_SLOT_ID(event->flags);
1798         xdev = xhci->devs[slot_id];
1799         if (!xdev) {
1800                 xhci_err(xhci, "ERROR Transfer event pointed to bad slot\n");
1801                 return -ENODEV;
1802         }
1803
1804         /* Endpoint ID is 1 based, our index is zero based */
1805         ep_index = TRB_TO_EP_ID(event->flags) - 1;
1806         xhci_dbg(xhci, "%s - ep index = %d\n", __func__, ep_index);
1807         ep = &xdev->eps[ep_index];
1808         ep_ring = xhci_dma_to_transfer_ring(ep, event->buffer);
1809         ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index);
1810         if (!ep_ring ||
1811                 (ep_ctx->ep_info & EP_STATE_MASK) == EP_STATE_DISABLED) {
1812                 xhci_err(xhci, "ERROR Transfer event for disabled endpoint "
1813                                 "or incorrect stream ring\n");
1814                 return -ENODEV;
1815         }
1816
1817         event_dma = event->buffer;
1818         trb_comp_code = GET_COMP_CODE(event->transfer_len);
1819         /* Look for common error cases */
1820         switch (trb_comp_code) {
1821         /* Skip codes that require special handling depending on
1822          * transfer type
1823          */
1824         case COMP_SUCCESS:
1825         case COMP_SHORT_TX:
1826                 break;
1827         case COMP_STOP:
1828                 xhci_dbg(xhci, "Stopped on Transfer TRB\n");
1829                 break;
1830         case COMP_STOP_INVAL:
1831                 xhci_dbg(xhci, "Stopped on No-op or Link TRB\n");
1832                 break;
1833         case COMP_STALL:
1834                 xhci_warn(xhci, "WARN: Stalled endpoint\n");
1835                 ep->ep_state |= EP_HALTED;
1836                 status = -EPIPE;
1837                 break;
1838         case COMP_TRB_ERR:
1839                 xhci_warn(xhci, "WARN: TRB error on endpoint\n");
1840                 status = -EILSEQ;
1841                 break;
1842         case COMP_SPLIT_ERR:
1843         case COMP_TX_ERR:
1844                 xhci_warn(xhci, "WARN: transfer error on endpoint\n");
1845                 status = -EPROTO;
1846                 break;
1847         case COMP_BABBLE:
1848                 xhci_warn(xhci, "WARN: babble error on endpoint\n");
1849                 status = -EOVERFLOW;
1850                 break;
1851         case COMP_DB_ERR:
1852                 xhci_warn(xhci, "WARN: HC couldn't access mem fast enough\n");
1853                 status = -ENOSR;
1854                 break;
1855         case COMP_BW_OVER:
1856                 xhci_warn(xhci, "WARN: bandwidth overrun event on endpoint\n");
1857                 break;
1858         case COMP_BUFF_OVER:
1859                 xhci_warn(xhci, "WARN: buffer overrun event on endpoint\n");
1860                 break;
1861         case COMP_UNDERRUN:
1862                 /*
1863                  * When the Isoch ring is empty, the xHC will generate
1864                  * a Ring Overrun Event for IN Isoch endpoint or Ring
1865                  * Underrun Event for OUT Isoch endpoint.
1866                  */
1867                 xhci_dbg(xhci, "underrun event on endpoint\n");
1868                 if (!list_empty(&ep_ring->td_list))
1869                         xhci_dbg(xhci, "Underrun Event for slot %d ep %d "
1870                                         "still with TDs queued?\n",
1871                                 TRB_TO_SLOT_ID(event->flags), ep_index);
1872                 goto cleanup;
1873         case COMP_OVERRUN:
1874                 xhci_dbg(xhci, "overrun event on endpoint\n");
1875                 if (!list_empty(&ep_ring->td_list))
1876                         xhci_dbg(xhci, "Overrun Event for slot %d ep %d "
1877                                         "still with TDs queued?\n",
1878                                 TRB_TO_SLOT_ID(event->flags), ep_index);
1879                 goto cleanup;
1880         case COMP_MISSED_INT:
1881                 /*
1882                  * When encounter missed service error, one or more isoc tds
1883                  * may be missed by xHC.
1884                  * Set skip flag of the ep_ring; Complete the missed tds as
1885                  * short transfer when process the ep_ring next time.
1886                  */
1887                 ep->skip = true;
1888                 xhci_dbg(xhci, "Miss service interval error, set skip flag\n");
1889                 goto cleanup;
1890         default:
1891                 if (xhci_is_vendor_info_code(xhci, trb_comp_code)) {
1892                         status = 0;
1893                         break;
1894                 }
1895                 xhci_warn(xhci, "ERROR Unknown event condition, HC probably "
1896                                 "busted\n");
1897                 goto cleanup;
1898         }
1899
1900         do {
1901                 /* This TRB should be in the TD at the head of this ring's
1902                  * TD list.
1903                  */
1904                 if (list_empty(&ep_ring->td_list)) {
1905                         xhci_warn(xhci, "WARN Event TRB for slot %d ep %d "
1906                                         "with no TDs queued?\n",
1907                                   TRB_TO_SLOT_ID(event->flags), ep_index);
1908                         xhci_dbg(xhci, "Event TRB with TRB type ID %u\n",
1909                           (unsigned int) (event->flags & TRB_TYPE_BITMASK)>>10);
1910                         xhci_print_trb_offsets(xhci, (union xhci_trb *) event);
1911                         if (ep->skip) {
1912                                 ep->skip = false;
1913                                 xhci_dbg(xhci, "td_list is empty while skip "
1914                                                 "flag set. Clear skip flag.\n");
1915                         }
1916                         ret = 0;
1917                         goto cleanup;
1918                 }
1919
1920                 td = list_entry(ep_ring->td_list.next, struct xhci_td, td_list);
1921                 /* Is this a TRB in the currently executing TD? */
1922                 event_seg = trb_in_td(ep_ring->deq_seg, ep_ring->dequeue,
1923                                 td->last_trb, event_dma);
1924                 if (event_seg && ep->skip) {
1925                         xhci_dbg(xhci, "Found td. Clear skip flag.\n");
1926                         ep->skip = false;
1927                 }
1928                 if (!event_seg &&
1929                    (!ep->skip || !usb_endpoint_xfer_isoc(&td->urb->ep->desc))) {
1930                         /* HC is busted, give up! */
1931                         xhci_err(xhci, "ERROR Transfer event TRB DMA ptr not "
1932                                         "part of current TD\n");
1933                         return -ESHUTDOWN;
1934                 }
1935
1936                 if (event_seg) {
1937                         event_trb = &event_seg->trbs[(event_dma -
1938                                          event_seg->dma) / sizeof(*event_trb)];
1939                         /*
1940                          * No-op TRB should not trigger interrupts.
1941                          * If event_trb is a no-op TRB, it means the
1942                          * corresponding TD has been cancelled. Just ignore
1943                          * the TD.
1944                          */
1945                         if ((event_trb->generic.field[3] & TRB_TYPE_BITMASK)
1946                                          == TRB_TYPE(TRB_TR_NOOP)) {
1947                                 xhci_dbg(xhci, "event_trb is a no-op TRB. "
1948                                                 "Skip it\n");
1949                                 goto cleanup;
1950                         }
1951                 }
1952
1953                 /* Now update the urb's actual_length and give back to
1954                  * the core
1955                  */
1956                 if (usb_endpoint_xfer_control(&td->urb->ep->desc))
1957                         ret = process_ctrl_td(xhci, td, event_trb, event, ep,
1958                                                  &status);
1959                 else if (usb_endpoint_xfer_isoc(&td->urb->ep->desc))
1960                         ret = process_isoc_td(xhci, td, event_trb, event, ep,
1961                                                  &status);
1962                 else
1963                         ret = process_bulk_intr_td(xhci, td, event_trb, event,
1964                                                  ep, &status);
1965
1966 cleanup:
1967                 /*
1968                  * Do not update event ring dequeue pointer if ep->skip is set.
1969                  * Will roll back to continue process missed tds.
1970                  */
1971                 if (trb_comp_code == COMP_MISSED_INT || !ep->skip) {
1972                         inc_deq(xhci, xhci->event_ring, true);
1973                 }
1974
1975                 if (ret) {
1976                         urb = td->urb;
1977                         urb_priv = urb->hcpriv;
1978                         /* Leave the TD around for the reset endpoint function
1979                          * to use(but only if it's not a control endpoint,
1980                          * since we already queued the Set TR dequeue pointer
1981                          * command for stalled control endpoints).
1982                          */
1983                         if (usb_endpoint_xfer_control(&urb->ep->desc) ||
1984                                 (trb_comp_code != COMP_STALL &&
1985                                         trb_comp_code != COMP_BABBLE))
1986                                 xhci_urb_free_priv(xhci, urb_priv);
1987
1988                         usb_hcd_unlink_urb_from_ep(xhci_to_hcd(xhci), urb);
1989                         xhci_dbg(xhci, "Giveback URB %p, len = %d, "
1990                                         "status = %d\n",
1991                                         urb, urb->actual_length, status);
1992                         spin_unlock(&xhci->lock);
1993                         usb_hcd_giveback_urb(xhci_to_hcd(xhci), urb, status);
1994                         spin_lock(&xhci->lock);
1995                 }
1996
1997         /*
1998          * If ep->skip is set, it means there are missed tds on the
1999          * endpoint ring need to take care of.
2000          * Process them as short transfer until reach the td pointed by
2001          * the event.
2002          */
2003         } while (ep->skip && trb_comp_code != COMP_MISSED_INT);
2004
2005         return 0;
2006 }
2007
2008 /*
2009  * This function handles all OS-owned events on the event ring.  It may drop
2010  * xhci->lock between event processing (e.g. to pass up port status changes).
2011  */
2012 static void xhci_handle_event(struct xhci_hcd *xhci)
2013 {
2014         union xhci_trb *event;
2015         int update_ptrs = 1;
2016         int ret;
2017
2018         xhci_dbg(xhci, "In %s\n", __func__);
2019         if (!xhci->event_ring || !xhci->event_ring->dequeue) {
2020                 xhci->error_bitmask |= 1 << 1;
2021                 return;
2022         }
2023
2024         event = xhci->event_ring->dequeue;
2025         /* Does the HC or OS own the TRB? */
2026         if ((event->event_cmd.flags & TRB_CYCLE) !=
2027                         xhci->event_ring->cycle_state) {
2028                 xhci->error_bitmask |= 1 << 2;
2029                 return;
2030         }
2031         xhci_dbg(xhci, "%s - OS owns TRB\n", __func__);
2032
2033         /* FIXME: Handle more event types. */
2034         switch ((event->event_cmd.flags & TRB_TYPE_BITMASK)) {
2035         case TRB_TYPE(TRB_COMPLETION):
2036                 xhci_dbg(xhci, "%s - calling handle_cmd_completion\n", __func__);
2037                 handle_cmd_completion(xhci, &event->event_cmd);
2038                 xhci_dbg(xhci, "%s - returned from handle_cmd_completion\n", __func__);
2039                 break;
2040         case TRB_TYPE(TRB_PORT_STATUS):
2041                 xhci_dbg(xhci, "%s - calling handle_port_status\n", __func__);
2042                 handle_port_status(xhci, event);
2043                 xhci_dbg(xhci, "%s - returned from handle_port_status\n", __func__);
2044                 update_ptrs = 0;
2045                 break;
2046         case TRB_TYPE(TRB_TRANSFER):
2047                 xhci_dbg(xhci, "%s - calling handle_tx_event\n", __func__);
2048                 ret = handle_tx_event(xhci, &event->trans_event);
2049                 xhci_dbg(xhci, "%s - returned from handle_tx_event\n", __func__);
2050                 if (ret < 0)
2051                         xhci->error_bitmask |= 1 << 9;
2052                 else
2053                         update_ptrs = 0;
2054                 break;
2055         default:
2056                 if ((event->event_cmd.flags & TRB_TYPE_BITMASK) >= TRB_TYPE(48))
2057                         handle_vendor_event(xhci, event);
2058                 else
2059                         xhci->error_bitmask |= 1 << 3;
2060         }
2061         /* Any of the above functions may drop and re-acquire the lock, so check
2062          * to make sure a watchdog timer didn't mark the host as non-responsive.
2063          */
2064         if (xhci->xhc_state & XHCI_STATE_DYING) {
2065                 xhci_dbg(xhci, "xHCI host dying, returning from "
2066                                 "event handler.\n");
2067                 return;
2068         }
2069
2070         if (update_ptrs)
2071                 /* Update SW event ring dequeue pointer */
2072                 inc_deq(xhci, xhci->event_ring, true);
2073
2074         /* Are there more items on the event ring? */
2075         xhci_handle_event(xhci);
2076 }
2077
2078 /*
2079  * xHCI spec says we can get an interrupt, and if the HC has an error condition,
2080  * we might get bad data out of the event ring.  Section 4.10.2.7 has a list of
2081  * indicators of an event TRB error, but we check the status *first* to be safe.
2082  */
2083 irqreturn_t xhci_irq(struct usb_hcd *hcd)
2084 {
2085         struct xhci_hcd *xhci = hcd_to_xhci(hcd);
2086         u32 status;
2087         union xhci_trb *trb;
2088         u64 temp_64;
2089         union xhci_trb *event_ring_deq;
2090         dma_addr_t deq;
2091
2092         spin_lock(&xhci->lock);
2093         trb = xhci->event_ring->dequeue;
2094         /* Check if the xHC generated the interrupt, or the irq is shared */
2095         status = xhci_readl(xhci, &xhci->op_regs->status);
2096         if (status == 0xffffffff)
2097                 goto hw_died;
2098
2099         if (!(status & STS_EINT)) {
2100                 spin_unlock(&xhci->lock);
2101                 return IRQ_NONE;
2102         }
2103         xhci_dbg(xhci, "op reg status = %08x\n", status);
2104         xhci_dbg(xhci, "Event ring dequeue ptr:\n");
2105         xhci_dbg(xhci, "@%llx %08x %08x %08x %08x\n",
2106                         (unsigned long long)
2107                         xhci_trb_virt_to_dma(xhci->event_ring->deq_seg, trb),
2108                         lower_32_bits(trb->link.segment_ptr),
2109                         upper_32_bits(trb->link.segment_ptr),
2110                         (unsigned int) trb->link.intr_target,
2111                         (unsigned int) trb->link.control);
2112
2113         if (status & STS_FATAL) {
2114                 xhci_warn(xhci, "WARNING: Host System Error\n");
2115                 xhci_halt(xhci);
2116 hw_died:
2117                 xhci_to_hcd(xhci)->state = HC_STATE_HALT;
2118                 spin_unlock(&xhci->lock);
2119                 return -ESHUTDOWN;
2120         }
2121
2122         /*
2123          * Clear the op reg interrupt status first,
2124          * so we can receive interrupts from other MSI-X interrupters.
2125          * Write 1 to clear the interrupt status.
2126          */
2127         status |= STS_EINT;
2128         xhci_writel(xhci, status, &xhci->op_regs->status);
2129         /* FIXME when MSI-X is supported and there are multiple vectors */
2130         /* Clear the MSI-X event interrupt status */
2131
2132         if (hcd->irq != -1) {
2133                 u32 irq_pending;
2134                 /* Acknowledge the PCI interrupt */
2135                 irq_pending = xhci_readl(xhci, &xhci->ir_set->irq_pending);
2136                 irq_pending |= 0x3;
2137                 xhci_writel(xhci, irq_pending, &xhci->ir_set->irq_pending);
2138         }
2139
2140         if (xhci->xhc_state & XHCI_STATE_DYING) {
2141                 xhci_dbg(xhci, "xHCI dying, ignoring interrupt. "
2142                                 "Shouldn't IRQs be disabled?\n");
2143                 /* Clear the event handler busy flag (RW1C);
2144                  * the event ring should be empty.
2145                  */
2146                 temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
2147                 xhci_write_64(xhci, temp_64 | ERST_EHB,
2148                                 &xhci->ir_set->erst_dequeue);
2149                 spin_unlock(&xhci->lock);
2150
2151                 return IRQ_HANDLED;
2152         }
2153
2154         event_ring_deq = xhci->event_ring->dequeue;
2155         /* FIXME this should be a delayed service routine
2156          * that clears the EHB.
2157          */
2158         xhci_handle_event(xhci);
2159
2160         temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
2161         /* If necessary, update the HW's version of the event ring deq ptr. */
2162         if (event_ring_deq != xhci->event_ring->dequeue) {
2163                 deq = xhci_trb_virt_to_dma(xhci->event_ring->deq_seg,
2164                                 xhci->event_ring->dequeue);
2165                 if (deq == 0)
2166                         xhci_warn(xhci, "WARN something wrong with SW event "
2167                                         "ring dequeue ptr.\n");
2168                 /* Update HC event ring dequeue pointer */
2169                 temp_64 &= ERST_PTR_MASK;
2170                 temp_64 |= ((u64) deq & (u64) ~ERST_PTR_MASK);
2171         }
2172
2173         /* Clear the event handler busy flag (RW1C); event ring is empty. */
2174         temp_64 |= ERST_EHB;
2175         xhci_write_64(xhci, temp_64, &xhci->ir_set->erst_dequeue);
2176
2177         spin_unlock(&xhci->lock);
2178
2179         return IRQ_HANDLED;
2180 }
2181
2182 irqreturn_t xhci_msi_irq(int irq, struct usb_hcd *hcd)
2183 {
2184         irqreturn_t ret;
2185
2186         set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
2187
2188         ret = xhci_irq(hcd);
2189
2190         return ret;
2191 }
2192
2193 /****           Endpoint Ring Operations        ****/
2194
2195 /*
2196  * Generic function for queueing a TRB on a ring.
2197  * The caller must have checked to make sure there's room on the ring.
2198  *
2199  * @more_trbs_coming:   Will you enqueue more TRBs before calling
2200  *                      prepare_transfer()?
2201  */
2202 static void queue_trb(struct xhci_hcd *xhci, struct xhci_ring *ring,
2203                 bool consumer, bool more_trbs_coming,
2204                 u32 field1, u32 field2, u32 field3, u32 field4)
2205 {
2206         struct xhci_generic_trb *trb;
2207
2208         trb = &ring->enqueue->generic;
2209         trb->field[0] = field1;
2210         trb->field[1] = field2;
2211         trb->field[2] = field3;
2212         trb->field[3] = field4;
2213         inc_enq(xhci, ring, consumer, more_trbs_coming);
2214 }
2215
2216 /*
2217  * Does various checks on the endpoint ring, and makes it ready to queue num_trbs.
2218  * FIXME allocate segments if the ring is full.
2219  */
2220 static int prepare_ring(struct xhci_hcd *xhci, struct xhci_ring *ep_ring,
2221                 u32 ep_state, unsigned int num_trbs, gfp_t mem_flags)
2222 {
2223         /* Make sure the endpoint has been added to xHC schedule */
2224         xhci_dbg(xhci, "Endpoint state = 0x%x\n", ep_state);
2225         switch (ep_state) {
2226         case EP_STATE_DISABLED:
2227                 /*
2228                  * USB core changed config/interfaces without notifying us,
2229                  * or hardware is reporting the wrong state.
2230                  */
2231                 xhci_warn(xhci, "WARN urb submitted to disabled ep\n");
2232                 return -ENOENT;
2233         case EP_STATE_ERROR:
2234                 xhci_warn(xhci, "WARN waiting for error on ep to be cleared\n");
2235                 /* FIXME event handling code for error needs to clear it */
2236                 /* XXX not sure if this should be -ENOENT or not */
2237                 return -EINVAL;
2238         case EP_STATE_HALTED:
2239                 xhci_dbg(xhci, "WARN halted endpoint, queueing URB anyway.\n");
2240         case EP_STATE_STOPPED:
2241         case EP_STATE_RUNNING:
2242                 break;
2243         default:
2244                 xhci_err(xhci, "ERROR unknown endpoint state for ep\n");
2245                 /*
2246                  * FIXME issue Configure Endpoint command to try to get the HC
2247                  * back into a known state.
2248                  */
2249                 return -EINVAL;
2250         }
2251         if (!room_on_ring(xhci, ep_ring, num_trbs)) {
2252                 /* FIXME allocate more room */
2253                 xhci_err(xhci, "ERROR no room on ep ring\n");
2254                 return -ENOMEM;
2255         }
2256
2257         if (enqueue_is_link_trb(ep_ring)) {
2258                 struct xhci_ring *ring = ep_ring;
2259                 union xhci_trb *next;
2260
2261                 xhci_dbg(xhci, "prepare_ring: pointing to link trb\n");
2262                 next = ring->enqueue;
2263
2264                 while (last_trb(xhci, ring, ring->enq_seg, next)) {
2265
2266                         /* If we're not dealing with 0.95 hardware,
2267                          * clear the chain bit.
2268                          */
2269                         if (!xhci_link_trb_quirk(xhci))
2270                                 next->link.control &= ~TRB_CHAIN;
2271                         else
2272                                 next->link.control |= TRB_CHAIN;
2273
2274                         wmb();
2275                         next->link.control ^= (u32) TRB_CYCLE;
2276
2277                         /* Toggle the cycle bit after the last ring segment. */
2278                         if (last_trb_on_last_seg(xhci, ring, ring->enq_seg, next)) {
2279                                 ring->cycle_state = (ring->cycle_state ? 0 : 1);
2280                                 if (!in_interrupt()) {
2281                                         xhci_dbg(xhci, "queue_trb: Toggle cycle "
2282                                                 "state for ring %p = %i\n",
2283                                                 ring, (unsigned int)ring->cycle_state);
2284                                 }
2285                         }
2286                         ring->enq_seg = ring->enq_seg->next;
2287                         ring->enqueue = ring->enq_seg->trbs;
2288                         next = ring->enqueue;
2289                 }
2290         }
2291
2292         return 0;
2293 }
2294
2295 static int prepare_transfer(struct xhci_hcd *xhci,
2296                 struct xhci_virt_device *xdev,
2297                 unsigned int ep_index,
2298                 unsigned int stream_id,
2299                 unsigned int num_trbs,
2300                 struct urb *urb,
2301                 unsigned int td_index,
2302                 gfp_t mem_flags)
2303 {
2304         int ret;
2305         struct urb_priv *urb_priv;
2306         struct xhci_td  *td;
2307         struct xhci_ring *ep_ring;
2308         struct xhci_ep_ctx *ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index);
2309
2310         ep_ring = xhci_stream_id_to_ring(xdev, ep_index, stream_id);
2311         if (!ep_ring) {
2312                 xhci_dbg(xhci, "Can't prepare ring for bad stream ID %u\n",
2313                                 stream_id);
2314                 return -EINVAL;
2315         }
2316
2317         ret = prepare_ring(xhci, ep_ring,
2318                         ep_ctx->ep_info & EP_STATE_MASK,
2319                         num_trbs, mem_flags);
2320         if (ret)
2321                 return ret;
2322
2323         urb_priv = urb->hcpriv;
2324         td = urb_priv->td[td_index];
2325
2326         INIT_LIST_HEAD(&td->td_list);
2327         INIT_LIST_HEAD(&td->cancelled_td_list);
2328
2329         if (td_index == 0) {
2330                 ret = usb_hcd_link_urb_to_ep(xhci_to_hcd(xhci), urb);
2331                 if (unlikely(ret)) {
2332                         xhci_urb_free_priv(xhci, urb_priv);
2333                         urb->hcpriv = NULL;
2334                         return ret;
2335                 }
2336         }
2337
2338         td->urb = urb;
2339         /* Add this TD to the tail of the endpoint ring's TD list */
2340         list_add_tail(&td->td_list, &ep_ring->td_list);
2341         td->start_seg = ep_ring->enq_seg;
2342         td->first_trb = ep_ring->enqueue;
2343
2344         urb_priv->td[td_index] = td;
2345
2346         return 0;
2347 }
2348
2349 static unsigned int count_sg_trbs_needed(struct xhci_hcd *xhci, struct urb *urb)
2350 {
2351         int num_sgs, num_trbs, running_total, temp, i;
2352         struct scatterlist *sg;
2353
2354         sg = NULL;
2355         num_sgs = urb->num_sgs;
2356         temp = urb->transfer_buffer_length;
2357
2358         xhci_dbg(xhci, "count sg list trbs: \n");
2359         num_trbs = 0;
2360         for_each_sg(urb->sg, sg, num_sgs, i) {
2361                 unsigned int previous_total_trbs = num_trbs;
2362                 unsigned int len = sg_dma_len(sg);
2363
2364                 /* Scatter gather list entries may cross 64KB boundaries */
2365                 running_total = TRB_MAX_BUFF_SIZE -
2366                         (sg_dma_address(sg) & ((1 << TRB_MAX_BUFF_SHIFT) - 1));
2367                 if (running_total != 0)
2368                         num_trbs++;
2369
2370                 /* How many more 64KB chunks to transfer, how many more TRBs? */
2371                 while (running_total < sg_dma_len(sg)) {
2372                         num_trbs++;
2373                         running_total += TRB_MAX_BUFF_SIZE;
2374                 }
2375                 xhci_dbg(xhci, " sg #%d: dma = %#llx, len = %#x (%d), num_trbs = %d\n",
2376                                 i, (unsigned long long)sg_dma_address(sg),
2377                                 len, len, num_trbs - previous_total_trbs);
2378
2379                 len = min_t(int, len, temp);
2380                 temp -= len;
2381                 if (temp == 0)
2382                         break;
2383         }
2384         xhci_dbg(xhci, "\n");
2385         if (!in_interrupt())
2386                 xhci_dbg(xhci, "ep %#x - urb len = %d, sglist used, "
2387                                 "num_trbs = %d\n",
2388                                 urb->ep->desc.bEndpointAddress,
2389                                 urb->transfer_buffer_length,
2390                                 num_trbs);
2391         return num_trbs;
2392 }
2393
2394 static void check_trb_math(struct urb *urb, int num_trbs, int running_total)
2395 {
2396         if (num_trbs != 0)
2397                 dev_dbg(&urb->dev->dev, "%s - ep %#x - Miscalculated number of "
2398                                 "TRBs, %d left\n", __func__,
2399                                 urb->ep->desc.bEndpointAddress, num_trbs);
2400         if (running_total != urb->transfer_buffer_length)
2401                 dev_dbg(&urb->dev->dev, "%s - ep %#x - Miscalculated tx length, "
2402                                 "queued %#x (%d), asked for %#x (%d)\n",
2403                                 __func__,
2404                                 urb->ep->desc.bEndpointAddress,
2405                                 running_total, running_total,
2406                                 urb->transfer_buffer_length,
2407                                 urb->transfer_buffer_length);
2408 }
2409
2410 static void giveback_first_trb(struct xhci_hcd *xhci, int slot_id,
2411                 unsigned int ep_index, unsigned int stream_id, int start_cycle,
2412                 struct xhci_generic_trb *start_trb)
2413 {
2414         /*
2415          * Pass all the TRBs to the hardware at once and make sure this write
2416          * isn't reordered.
2417          */
2418         wmb();
2419         if (start_cycle)
2420                 start_trb->field[3] |= start_cycle;
2421         else
2422                 start_trb->field[3] &= ~0x1;
2423         xhci_ring_ep_doorbell(xhci, slot_id, ep_index, stream_id);
2424 }
2425
2426 /*
2427  * xHCI uses normal TRBs for both bulk and interrupt.  When the interrupt
2428  * endpoint is to be serviced, the xHC will consume (at most) one TD.  A TD
2429  * (comprised of sg list entries) can take several service intervals to
2430  * transmit.
2431  */
2432 int xhci_queue_intr_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
2433                 struct urb *urb, int slot_id, unsigned int ep_index)
2434 {
2435         struct xhci_ep_ctx *ep_ctx = xhci_get_ep_ctx(xhci,
2436                         xhci->devs[slot_id]->out_ctx, ep_index);
2437         int xhci_interval;
2438         int ep_interval;
2439
2440         xhci_interval = EP_INTERVAL_TO_UFRAMES(ep_ctx->ep_info);
2441         ep_interval = urb->interval;
2442         /* Convert to microframes */
2443         if (urb->dev->speed == USB_SPEED_LOW ||
2444                         urb->dev->speed == USB_SPEED_FULL)
2445                 ep_interval *= 8;
2446         /* FIXME change this to a warning and a suggestion to use the new API
2447          * to set the polling interval (once the API is added).
2448          */
2449         if (xhci_interval != ep_interval) {
2450                 if (printk_ratelimit())
2451                         dev_dbg(&urb->dev->dev, "Driver uses different interval"
2452                                         " (%d microframe%s) than xHCI "
2453                                         "(%d microframe%s)\n",
2454                                         ep_interval,
2455                                         ep_interval == 1 ? "" : "s",
2456                                         xhci_interval,
2457                                         xhci_interval == 1 ? "" : "s");
2458                 urb->interval = xhci_interval;
2459                 /* Convert back to frames for LS/FS devices */
2460                 if (urb->dev->speed == USB_SPEED_LOW ||
2461                                 urb->dev->speed == USB_SPEED_FULL)
2462                         urb->interval /= 8;
2463         }
2464         return xhci_queue_bulk_tx(xhci, GFP_ATOMIC, urb, slot_id, ep_index);
2465 }
2466
2467 /*
2468  * The TD size is the number of bytes remaining in the TD (including this TRB),
2469  * right shifted by 10.
2470  * It must fit in bits 21:17, so it can't be bigger than 31.
2471  */
2472 static u32 xhci_td_remainder(unsigned int remainder)
2473 {
2474         u32 max = (1 << (21 - 17 + 1)) - 1;
2475
2476         if ((remainder >> 10) >= max)
2477                 return max << 17;
2478         else
2479                 return (remainder >> 10) << 17;
2480 }
2481
2482 static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
2483                 struct urb *urb, int slot_id, unsigned int ep_index)
2484 {
2485         struct xhci_ring *ep_ring;
2486         unsigned int num_trbs;
2487         struct urb_priv *urb_priv;
2488         struct xhci_td *td;
2489         struct scatterlist *sg;
2490         int num_sgs;
2491         int trb_buff_len, this_sg_len, running_total;
2492         bool first_trb;
2493         u64 addr;
2494         bool more_trbs_coming;
2495
2496         struct xhci_generic_trb *start_trb;
2497         int start_cycle;
2498
2499         ep_ring = xhci_urb_to_transfer_ring(xhci, urb);
2500         if (!ep_ring)
2501                 return -EINVAL;
2502
2503         num_trbs = count_sg_trbs_needed(xhci, urb);
2504         num_sgs = urb->num_sgs;
2505
2506         trb_buff_len = prepare_transfer(xhci, xhci->devs[slot_id],
2507                         ep_index, urb->stream_id,
2508                         num_trbs, urb, 0, mem_flags);
2509         if (trb_buff_len < 0)
2510                 return trb_buff_len;
2511
2512         urb_priv = urb->hcpriv;
2513         td = urb_priv->td[0];
2514
2515         /*
2516          * Don't give the first TRB to the hardware (by toggling the cycle bit)
2517          * until we've finished creating all the other TRBs.  The ring's cycle
2518          * state may change as we enqueue the other TRBs, so save it too.
2519          */
2520         start_trb = &ep_ring->enqueue->generic;
2521         start_cycle = ep_ring->cycle_state;
2522
2523         running_total = 0;
2524         /*
2525          * How much data is in the first TRB?
2526          *
2527          * There are three forces at work for TRB buffer pointers and lengths:
2528          * 1. We don't want to walk off the end of this sg-list entry buffer.
2529          * 2. The transfer length that the driver requested may be smaller than
2530          *    the amount of memory allocated for this scatter-gather list.
2531          * 3. TRBs buffers can't cross 64KB boundaries.
2532          */
2533         sg = urb->sg;
2534         addr = (u64) sg_dma_address(sg);
2535         this_sg_len = sg_dma_len(sg);
2536         trb_buff_len = TRB_MAX_BUFF_SIZE -
2537                 (addr & ((1 << TRB_MAX_BUFF_SHIFT) - 1));
2538         trb_buff_len = min_t(int, trb_buff_len, this_sg_len);
2539         if (trb_buff_len > urb->transfer_buffer_length)
2540                 trb_buff_len = urb->transfer_buffer_length;
2541         xhci_dbg(xhci, "First length to xfer from 1st sglist entry = %u\n",
2542                         trb_buff_len);
2543
2544         first_trb = true;
2545         /* Queue the first TRB, even if it's zero-length */
2546         do {
2547                 u32 field = 0;
2548                 u32 length_field = 0;
2549                 u32 remainder = 0;
2550
2551                 /* Don't change the cycle bit of the first TRB until later */
2552                 if (first_trb) {
2553                         first_trb = false;
2554                         if (start_cycle == 0)
2555                                 field |= 0x1;
2556                 } else
2557                         field |= ep_ring->cycle_state;
2558
2559                 /* Chain all the TRBs together; clear the chain bit in the last
2560                  * TRB to indicate it's the last TRB in the chain.
2561                  */
2562                 if (num_trbs > 1) {
2563                         field |= TRB_CHAIN;
2564                 } else {
2565                         /* FIXME - add check for ZERO_PACKET flag before this */
2566                         td->last_trb = ep_ring->enqueue;
2567                         field |= TRB_IOC;
2568                 }
2569                 xhci_dbg(xhci, " sg entry: dma = %#x, len = %#x (%d), "
2570                                 "64KB boundary at %#x, end dma = %#x\n",
2571                                 (unsigned int) addr, trb_buff_len, trb_buff_len,
2572                                 (unsigned int) (addr + TRB_MAX_BUFF_SIZE) & ~(TRB_MAX_BUFF_SIZE - 1),
2573                                 (unsigned int) addr + trb_buff_len);
2574                 if (TRB_MAX_BUFF_SIZE -
2575                                 (addr & ((1 << TRB_MAX_BUFF_SHIFT) - 1)) < trb_buff_len) {
2576                         xhci_warn(xhci, "WARN: sg dma xfer crosses 64KB boundaries!\n");
2577                         xhci_dbg(xhci, "Next boundary at %#x, end dma = %#x\n",
2578                                         (unsigned int) (addr + TRB_MAX_BUFF_SIZE) & ~(TRB_MAX_BUFF_SIZE - 1),
2579                                         (unsigned int) addr + trb_buff_len);
2580                 }
2581                 remainder = xhci_td_remainder(urb->transfer_buffer_length -
2582                                 running_total) ;
2583                 length_field = TRB_LEN(trb_buff_len) |
2584                         remainder |
2585                         TRB_INTR_TARGET(0);
2586                 if (num_trbs > 1)
2587                         more_trbs_coming = true;
2588                 else
2589                         more_trbs_coming = false;
2590                 queue_trb(xhci, ep_ring, false, more_trbs_coming,
2591                                 lower_32_bits(addr),
2592                                 upper_32_bits(addr),
2593                                 length_field,
2594                                 /* We always want to know if the TRB was short,
2595                                  * or we won't get an event when it completes.
2596                                  * (Unless we use event data TRBs, which are a
2597                                  * waste of space and HC resources.)
2598                                  */
2599                                 field | TRB_ISP | TRB_TYPE(TRB_NORMAL));
2600                 --num_trbs;
2601                 running_total += trb_buff_len;
2602
2603                 /* Calculate length for next transfer --
2604                  * Are we done queueing all the TRBs for this sg entry?
2605                  */
2606                 this_sg_len -= trb_buff_len;
2607                 if (this_sg_len == 0) {
2608                         --num_sgs;
2609                         if (num_sgs == 0)
2610                                 break;
2611                         sg = sg_next(sg);
2612                         addr = (u64) sg_dma_address(sg);
2613                         this_sg_len = sg_dma_len(sg);
2614                 } else {
2615                         addr += trb_buff_len;
2616                 }
2617
2618                 trb_buff_len = TRB_MAX_BUFF_SIZE -
2619                         (addr & ((1 << TRB_MAX_BUFF_SHIFT) - 1));
2620                 trb_buff_len = min_t(int, trb_buff_len, this_sg_len);
2621                 if (running_total + trb_buff_len > urb->transfer_buffer_length)
2622                         trb_buff_len =
2623                                 urb->transfer_buffer_length - running_total;
2624         } while (running_total < urb->transfer_buffer_length);
2625
2626         check_trb_math(urb, num_trbs, running_total);
2627         giveback_first_trb(xhci, slot_id, ep_index, urb->stream_id,
2628                         start_cycle, start_trb);
2629         return 0;
2630 }
2631
2632 /* This is very similar to what ehci-q.c qtd_fill() does */
2633 int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
2634                 struct urb *urb, int slot_id, unsigned int ep_index)
2635 {
2636         struct xhci_ring *ep_ring;
2637         struct urb_priv *urb_priv;
2638         struct xhci_td *td;
2639         int num_trbs;
2640         struct xhci_generic_trb *start_trb;
2641         bool first_trb;
2642         bool more_trbs_coming;
2643         int start_cycle;
2644         u32 field, length_field;
2645
2646         int running_total, trb_buff_len, ret;
2647         u64 addr;
2648
2649         if (urb->num_sgs)
2650                 return queue_bulk_sg_tx(xhci, mem_flags, urb, slot_id, ep_index);
2651
2652         ep_ring = xhci_urb_to_transfer_ring(xhci, urb);
2653         if (!ep_ring)
2654                 return -EINVAL;
2655
2656         num_trbs = 0;
2657         /* How much data is (potentially) left before the 64KB boundary? */
2658         running_total = TRB_MAX_BUFF_SIZE -
2659                 (urb->transfer_dma & ((1 << TRB_MAX_BUFF_SHIFT) - 1));
2660
2661         /* If there's some data on this 64KB chunk, or we have to send a
2662          * zero-length transfer, we need at least one TRB
2663          */
2664         if (running_total != 0 || urb->transfer_buffer_length == 0)
2665                 num_trbs++;
2666         /* How many more 64KB chunks to transfer, how many more TRBs? */
2667         while (running_total < urb->transfer_buffer_length) {
2668                 num_trbs++;
2669                 running_total += TRB_MAX_BUFF_SIZE;
2670         }
2671         /* FIXME: this doesn't deal with URB_ZERO_PACKET - need one more */
2672
2673         if (!in_interrupt())
2674                 xhci_dbg(xhci, "ep %#x - urb len = %#x (%d), "
2675                                 "addr = %#llx, num_trbs = %d\n",
2676                                 urb->ep->desc.bEndpointAddress,
2677                                 urb->transfer_buffer_length,
2678                                 urb->transfer_buffer_length,
2679                                 (unsigned long long)urb->transfer_dma,
2680                                 num_trbs);
2681
2682         ret = prepare_transfer(xhci, xhci->devs[slot_id],
2683                         ep_index, urb->stream_id,
2684                         num_trbs, urb, 0, mem_flags);
2685         if (ret < 0)
2686                 return ret;
2687
2688         urb_priv = urb->hcpriv;
2689         td = urb_priv->td[0];
2690
2691         /*
2692          * Don't give the first TRB to the hardware (by toggling the cycle bit)
2693          * until we've finished creating all the other TRBs.  The ring's cycle
2694          * state may change as we enqueue the other TRBs, so save it too.
2695          */
2696         start_trb = &ep_ring->enqueue->generic;
2697         start_cycle = ep_ring->cycle_state;
2698
2699         running_total = 0;
2700         /* How much data is in the first TRB? */
2701         addr = (u64) urb->transfer_dma;
2702         trb_buff_len = TRB_MAX_BUFF_SIZE -
2703                 (urb->transfer_dma & ((1 << TRB_MAX_BUFF_SHIFT) - 1));
2704         if (urb->transfer_buffer_length < trb_buff_len)
2705                 trb_buff_len = urb->transfer_buffer_length;
2706
2707         first_trb = true;
2708
2709         /* Queue the first TRB, even if it's zero-length */
2710         do {
2711                 u32 remainder = 0;
2712                 field = 0;
2713
2714                 /* Don't change the cycle bit of the first TRB until later */
2715                 if (first_trb) {
2716                         first_trb = false;
2717                         if (start_cycle == 0)
2718                                 field |= 0x1;
2719                 } else
2720                         field |= ep_ring->cycle_state;
2721
2722                 /* Chain all the TRBs together; clear the chain bit in the last
2723                  * TRB to indicate it's the last TRB in the chain.
2724                  */
2725                 if (num_trbs > 1) {
2726                         field |= TRB_CHAIN;
2727                 } else {
2728                         /* FIXME - add check for ZERO_PACKET flag before this */
2729                         td->last_trb = ep_ring->enqueue;
2730                         field |= TRB_IOC;
2731                 }
2732                 remainder = xhci_td_remainder(urb->transfer_buffer_length -
2733                                 running_total);
2734                 length_field = TRB_LEN(trb_buff_len) |
2735                         remainder |
2736                         TRB_INTR_TARGET(0);
2737                 if (num_trbs > 1)
2738                         more_trbs_coming = true;
2739                 else
2740                         more_trbs_coming = false;
2741                 queue_trb(xhci, ep_ring, false, more_trbs_coming,
2742                                 lower_32_bits(addr),
2743                                 upper_32_bits(addr),
2744                                 length_field,
2745                                 /* We always want to know if the TRB was short,
2746                                  * or we won't get an event when it completes.
2747                                  * (Unless we use event data TRBs, which are a
2748                                  * waste of space and HC resources.)
2749                                  */
2750                                 field | TRB_ISP | TRB_TYPE(TRB_NORMAL));
2751                 --num_trbs;
2752                 running_total += trb_buff_len;
2753
2754                 /* Calculate length for next transfer */
2755                 addr += trb_buff_len;
2756                 trb_buff_len = urb->transfer_buffer_length - running_total;
2757                 if (trb_buff_len > TRB_MAX_BUFF_SIZE)
2758                         trb_buff_len = TRB_MAX_BUFF_SIZE;
2759         } while (running_total < urb->transfer_buffer_length);
2760
2761         check_trb_math(urb, num_trbs, running_total);
2762         giveback_first_trb(xhci, slot_id, ep_index, urb->stream_id,
2763                         start_cycle, start_trb);
2764         return 0;
2765 }
2766
2767 /* Caller must have locked xhci->lock */
2768 int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
2769                 struct urb *urb, int slot_id, unsigned int ep_index)
2770 {
2771         struct xhci_ring *ep_ring;
2772         int num_trbs;
2773         int ret;
2774         struct usb_ctrlrequest *setup;
2775         struct xhci_generic_trb *start_trb;
2776         int start_cycle;
2777         u32 field, length_field;
2778         struct urb_priv *urb_priv;
2779         struct xhci_td *td;
2780
2781         ep_ring = xhci_urb_to_transfer_ring(xhci, urb);
2782         if (!ep_ring)
2783                 return -EINVAL;
2784
2785         /*
2786          * Need to copy setup packet into setup TRB, so we can't use the setup
2787          * DMA address.
2788          */
2789         if (!urb->setup_packet)
2790                 return -EINVAL;
2791
2792         if (!in_interrupt())
2793                 xhci_dbg(xhci, "Queueing ctrl tx for slot id %d, ep %d\n",
2794                                 slot_id, ep_index);
2795         /* 1 TRB for setup, 1 for status */
2796         num_trbs = 2;
2797         /*
2798          * Don't need to check if we need additional event data and normal TRBs,
2799          * since data in control transfers will never get bigger than 16MB
2800          * XXX: can we get a buffer that crosses 64KB boundaries?
2801          */
2802         if (urb->transfer_buffer_length > 0)
2803                 num_trbs++;
2804         ret = prepare_transfer(xhci, xhci->devs[slot_id],
2805                         ep_index, urb->stream_id,
2806                         num_trbs, urb, 0, mem_flags);
2807         if (ret < 0)
2808                 return ret;
2809
2810         urb_priv = urb->hcpriv;
2811         td = urb_priv->td[0];
2812
2813         /*
2814          * Don't give the first TRB to the hardware (by toggling the cycle bit)
2815          * until we've finished creating all the other TRBs.  The ring's cycle
2816          * state may change as we enqueue the other TRBs, so save it too.
2817          */
2818         start_trb = &ep_ring->enqueue->generic;
2819         start_cycle = ep_ring->cycle_state;
2820
2821         /* Queue setup TRB - see section 6.4.1.2.1 */
2822         /* FIXME better way to translate setup_packet into two u32 fields? */
2823         setup = (struct usb_ctrlrequest *) urb->setup_packet;
2824         field = 0;
2825         field |= TRB_IDT | TRB_TYPE(TRB_SETUP);
2826         if (start_cycle == 0)
2827                 field |= 0x1;
2828         queue_trb(xhci, ep_ring, false, true,
2829                         /* FIXME endianness is probably going to bite my ass here. */
2830                         setup->bRequestType | setup->bRequest << 8 | setup->wValue << 16,
2831                         setup->wIndex | setup->wLength << 16,
2832                         TRB_LEN(8) | TRB_INTR_TARGET(0),
2833                         /* Immediate data in pointer */
2834                         field);
2835
2836         /* If there's data, queue data TRBs */
2837         field = 0;
2838         length_field = TRB_LEN(urb->transfer_buffer_length) |
2839                 xhci_td_remainder(urb->transfer_buffer_length) |
2840                 TRB_INTR_TARGET(0);
2841         if (urb->transfer_buffer_length > 0) {
2842                 if (setup->bRequestType & USB_DIR_IN)
2843                         field |= TRB_DIR_IN;
2844                 queue_trb(xhci, ep_ring, false, true,
2845                                 lower_32_bits(urb->transfer_dma),
2846                                 upper_32_bits(urb->transfer_dma),
2847                                 length_field,
2848                                 /* Event on short tx */
2849                                 field | TRB_ISP | TRB_TYPE(TRB_DATA) | ep_ring->cycle_state);
2850         }
2851
2852         /* Save the DMA address of the last TRB in the TD */
2853         td->last_trb = ep_ring->enqueue;
2854
2855         /* Queue status TRB - see Table 7 and sections 4.11.2.2 and 6.4.1.2.3 */
2856         /* If the device sent data, the status stage is an OUT transfer */
2857         if (urb->transfer_buffer_length > 0 && setup->bRequestType & USB_DIR_IN)
2858                 field = 0;
2859         else
2860                 field = TRB_DIR_IN;
2861         queue_trb(xhci, ep_ring, false, false,
2862                         0,
2863                         0,
2864                         TRB_INTR_TARGET(0),
2865                         /* Event on completion */
2866                         field | TRB_IOC | TRB_TYPE(TRB_STATUS) | ep_ring->cycle_state);
2867
2868         giveback_first_trb(xhci, slot_id, ep_index, 0,
2869                         start_cycle, start_trb);
2870         return 0;
2871 }
2872
2873 static int count_isoc_trbs_needed(struct xhci_hcd *xhci,
2874                 struct urb *urb, int i)
2875 {
2876         int num_trbs = 0;
2877         u64 addr, td_len, running_total;
2878
2879         addr = (u64) (urb->transfer_dma + urb->iso_frame_desc[i].offset);
2880         td_len = urb->iso_frame_desc[i].length;
2881
2882         running_total = TRB_MAX_BUFF_SIZE -
2883                         (addr & ((1 << TRB_MAX_BUFF_SHIFT) - 1));
2884         if (running_total != 0)
2885                 num_trbs++;
2886
2887         while (running_total < td_len) {
2888                 num_trbs++;
2889                 running_total += TRB_MAX_BUFF_SIZE;
2890         }
2891
2892         return num_trbs;
2893 }
2894
2895 /* This is for isoc transfer */
2896 static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
2897                 struct urb *urb, int slot_id, unsigned int ep_index)
2898 {
2899         struct xhci_ring *ep_ring;
2900         struct urb_priv *urb_priv;
2901         struct xhci_td *td;
2902         int num_tds, trbs_per_td;
2903         struct xhci_generic_trb *start_trb;
2904         bool first_trb;
2905         int start_cycle;
2906         u32 field, length_field;
2907         int running_total, trb_buff_len, td_len, td_remain_len, ret;
2908         u64 start_addr, addr;
2909         int i, j;
2910         bool more_trbs_coming;
2911
2912         ep_ring = xhci->devs[slot_id]->eps[ep_index].ring;
2913
2914         num_tds = urb->number_of_packets;
2915         if (num_tds < 1) {
2916                 xhci_dbg(xhci, "Isoc URB with zero packets?\n");
2917                 return -EINVAL;
2918         }
2919
2920         if (!in_interrupt())
2921                 xhci_dbg(xhci, "ep %#x - urb len = %#x (%d),"
2922                                 " addr = %#llx, num_tds = %d\n",
2923                                 urb->ep->desc.bEndpointAddress,
2924                                 urb->transfer_buffer_length,
2925                                 urb->transfer_buffer_length,
2926                                 (unsigned long long)urb->transfer_dma,
2927                                 num_tds);
2928
2929         start_addr = (u64) urb->transfer_dma;
2930         start_trb = &ep_ring->enqueue->generic;
2931         start_cycle = ep_ring->cycle_state;
2932
2933         /* Queue the first TRB, even if it's zero-length */
2934         for (i = 0; i < num_tds; i++) {
2935                 first_trb = true;
2936
2937                 running_total = 0;
2938                 addr = start_addr + urb->iso_frame_desc[i].offset;
2939                 td_len = urb->iso_frame_desc[i].length;
2940                 td_remain_len = td_len;
2941
2942                 trbs_per_td = count_isoc_trbs_needed(xhci, urb, i);
2943
2944                 ret = prepare_transfer(xhci, xhci->devs[slot_id], ep_index,
2945                                 urb->stream_id, trbs_per_td, urb, i, mem_flags);
2946                 if (ret < 0)
2947                         return ret;
2948
2949                 urb_priv = urb->hcpriv;
2950                 td = urb_priv->td[i];
2951
2952                 for (j = 0; j < trbs_per_td; j++) {
2953                         u32 remainder = 0;
2954                         field = 0;
2955
2956                         if (first_trb) {
2957                                 /* Queue the isoc TRB */
2958                                 field |= TRB_TYPE(TRB_ISOC);
2959                                 /* Assume URB_ISO_ASAP is set */
2960                                 field |= TRB_SIA;
2961                                 if (i == 0) {
2962                                         if (start_cycle == 0)
2963                                                 field |= 0x1;
2964                                 } else
2965                                         field |= ep_ring->cycle_state;
2966                                 first_trb = false;
2967                         } else {
2968                                 /* Queue other normal TRBs */
2969                                 field |= TRB_TYPE(TRB_NORMAL);
2970                                 field |= ep_ring->cycle_state;
2971                         }
2972
2973                         /* Chain all the TRBs together; clear the chain bit in
2974                          * the last TRB to indicate it's the last TRB in the
2975                          * chain.
2976                          */
2977                         if (j < trbs_per_td - 1) {
2978                                 field |= TRB_CHAIN;
2979                                 more_trbs_coming = true;
2980                         } else {
2981                                 td->last_trb = ep_ring->enqueue;
2982                                 field |= TRB_IOC;
2983                                 more_trbs_coming = false;
2984                         }
2985
2986                         /* Calculate TRB length */
2987                         trb_buff_len = TRB_MAX_BUFF_SIZE -
2988                                 (addr & ((1 << TRB_MAX_BUFF_SHIFT) - 1));
2989                         if (trb_buff_len > td_remain_len)
2990                                 trb_buff_len = td_remain_len;
2991
2992                         remainder = xhci_td_remainder(td_len - running_total);
2993                         length_field = TRB_LEN(trb_buff_len) |
2994                                 remainder |
2995                                 TRB_INTR_TARGET(0);
2996                         queue_trb(xhci, ep_ring, false, more_trbs_coming,
2997                                 lower_32_bits(addr),
2998                                 upper_32_bits(addr),
2999                                 length_field,
3000                                 /* We always want to know if the TRB was short,
3001                                  * or we won't get an event when it completes.
3002                                  * (Unless we use event data TRBs, which are a
3003                                  * waste of space and HC resources.)
3004                                  */
3005                                 field | TRB_ISP);
3006                         running_total += trb_buff_len;
3007
3008                         addr += trb_buff_len;
3009                         td_remain_len -= trb_buff_len;
3010                 }
3011
3012                 /* Check TD length */
3013                 if (running_total != td_len) {
3014                         xhci_err(xhci, "ISOC TD length unmatch\n");
3015                         return -EINVAL;
3016                 }
3017         }
3018
3019         giveback_first_trb(xhci, slot_id, ep_index, urb->stream_id,
3020                         start_cycle, start_trb);
3021         return 0;
3022 }
3023
3024 /*
3025  * Check transfer ring to guarantee there is enough room for the urb.
3026  * Update ISO URB start_frame and interval.
3027  * Update interval as xhci_queue_intr_tx does. Just use xhci frame_index to
3028  * update the urb->start_frame by now.
3029  * Always assume URB_ISO_ASAP set, and NEVER use urb->start_frame as input.
3030  */
3031 int xhci_queue_isoc_tx_prepare(struct xhci_hcd *xhci, gfp_t mem_flags,
3032                 struct urb *urb, int slot_id, unsigned int ep_index)
3033 {
3034         struct xhci_virt_device *xdev;
3035         struct xhci_ring *ep_ring;
3036         struct xhci_ep_ctx *ep_ctx;
3037         int start_frame;
3038         int xhci_interval;
3039         int ep_interval;
3040         int num_tds, num_trbs, i;
3041         int ret;
3042
3043         xdev = xhci->devs[slot_id];
3044         ep_ring = xdev->eps[ep_index].ring;
3045         ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index);
3046
3047         num_trbs = 0;
3048         num_tds = urb->number_of_packets;
3049         for (i = 0; i < num_tds; i++)
3050                 num_trbs += count_isoc_trbs_needed(xhci, urb, i);
3051
3052         /* Check the ring to guarantee there is enough room for the whole urb.
3053          * Do not insert any td of the urb to the ring if the check failed.
3054          */
3055         ret = prepare_ring(xhci, ep_ring, ep_ctx->ep_info & EP_STATE_MASK,
3056                                 num_trbs, mem_flags);
3057         if (ret)
3058                 return ret;
3059
3060         start_frame = xhci_readl(xhci, &xhci->run_regs->microframe_index);
3061         start_frame &= 0x3fff;
3062
3063         urb->start_frame = start_frame;
3064         if (urb->dev->speed == USB_SPEED_LOW ||
3065                         urb->dev->speed == USB_SPEED_FULL)
3066                 urb->start_frame >>= 3;
3067
3068         xhci_interval = EP_INTERVAL_TO_UFRAMES(ep_ctx->ep_info);
3069         ep_interval = urb->interval;
3070         /* Convert to microframes */
3071         if (urb->dev->speed == USB_SPEED_LOW ||
3072                         urb->dev->speed == USB_SPEED_FULL)
3073                 ep_interval *= 8;
3074         /* FIXME change this to a warning and a suggestion to use the new API
3075          * to set the polling interval (once the API is added).
3076          */
3077         if (xhci_interval != ep_interval) {
3078                 if (printk_ratelimit())
3079                         dev_dbg(&urb->dev->dev, "Driver uses different interval"
3080                                         " (%d microframe%s) than xHCI "
3081                                         "(%d microframe%s)\n",
3082                                         ep_interval,
3083                                         ep_interval == 1 ? "" : "s",
3084                                         xhci_interval,
3085                                         xhci_interval == 1 ? "" : "s");
3086                 urb->interval = xhci_interval;
3087                 /* Convert back to frames for LS/FS devices */
3088                 if (urb->dev->speed == USB_SPEED_LOW ||
3089                                 urb->dev->speed == USB_SPEED_FULL)
3090                         urb->interval /= 8;
3091         }
3092         return xhci_queue_isoc_tx(xhci, GFP_ATOMIC, urb, slot_id, ep_index);
3093 }
3094
3095 /****           Command Ring Operations         ****/
3096
3097 /* Generic function for queueing a command TRB on the command ring.
3098  * Check to make sure there's room on the command ring for one command TRB.
3099  * Also check that there's room reserved for commands that must not fail.
3100  * If this is a command that must not fail, meaning command_must_succeed = TRUE,
3101  * then only check for the number of reserved spots.
3102  * Don't decrement xhci->cmd_ring_reserved_trbs after we've queued the TRB
3103  * because the command event handler may want to resubmit a failed command.
3104  */
3105 static int queue_command(struct xhci_hcd *xhci, u32 field1, u32 field2,
3106                 u32 field3, u32 field4, bool command_must_succeed)
3107 {
3108         int reserved_trbs = xhci->cmd_ring_reserved_trbs;
3109         int ret;
3110
3111         if (!command_must_succeed)
3112                 reserved_trbs++;
3113
3114         ret = prepare_ring(xhci, xhci->cmd_ring, EP_STATE_RUNNING,
3115                         reserved_trbs, GFP_ATOMIC);
3116         if (ret < 0) {
3117                 xhci_err(xhci, "ERR: No room for command on command ring\n");
3118                 if (command_must_succeed)
3119                         xhci_err(xhci, "ERR: Reserved TRB counting for "
3120                                         "unfailable commands failed.\n");
3121                 return ret;
3122         }
3123         queue_trb(xhci, xhci->cmd_ring, false, false, field1, field2, field3,
3124                         field4 | xhci->cmd_ring->cycle_state);
3125         return 0;
3126 }
3127
3128 /* Queue a no-op command on the command ring */
3129 static int queue_cmd_noop(struct xhci_hcd *xhci)
3130 {
3131         return queue_command(xhci, 0, 0, 0, TRB_TYPE(TRB_CMD_NOOP), false);
3132 }
3133
3134 /*
3135  * Place a no-op command on the command ring to test the command and
3136  * event ring.
3137  */
3138 void *xhci_setup_one_noop(struct xhci_hcd *xhci)
3139 {
3140         if (queue_cmd_noop(xhci) < 0)
3141                 return NULL;
3142         xhci->noops_submitted++;
3143         return xhci_ring_cmd_db;
3144 }
3145
3146 /* Queue a slot enable or disable request on the command ring */
3147 int xhci_queue_slot_control(struct xhci_hcd *xhci, u32 trb_type, u32 slot_id)
3148 {
3149         return queue_command(xhci, 0, 0, 0,
3150                         TRB_TYPE(trb_type) | SLOT_ID_FOR_TRB(slot_id), false);
3151 }
3152
3153 /* Queue an address device command TRB */
3154 int xhci_queue_address_device(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
3155                 u32 slot_id)
3156 {
3157         return queue_command(xhci, lower_32_bits(in_ctx_ptr),
3158                         upper_32_bits(in_ctx_ptr), 0,
3159                         TRB_TYPE(TRB_ADDR_DEV) | SLOT_ID_FOR_TRB(slot_id),
3160                         false);
3161 }
3162
3163 int xhci_queue_vendor_command(struct xhci_hcd *xhci,
3164                 u32 field1, u32 field2, u32 field3, u32 field4)
3165 {
3166         return queue_command(xhci, field1, field2, field3, field4, false);
3167 }
3168
3169 /* Queue a reset device command TRB */
3170 int xhci_queue_reset_device(struct xhci_hcd *xhci, u32 slot_id)
3171 {
3172         return queue_command(xhci, 0, 0, 0,
3173                         TRB_TYPE(TRB_RESET_DEV) | SLOT_ID_FOR_TRB(slot_id),
3174                         false);
3175 }
3176
3177 /* Queue a configure endpoint command TRB */
3178 int xhci_queue_configure_endpoint(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
3179                 u32 slot_id, bool command_must_succeed)
3180 {
3181         return queue_command(xhci, lower_32_bits(in_ctx_ptr),
3182                         upper_32_bits(in_ctx_ptr), 0,
3183                         TRB_TYPE(TRB_CONFIG_EP) | SLOT_ID_FOR_TRB(slot_id),
3184                         command_must_succeed);
3185 }
3186
3187 /* Queue an evaluate context command TRB */
3188 int xhci_queue_evaluate_context(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
3189                 u32 slot_id)
3190 {
3191         return queue_command(xhci, lower_32_bits(in_ctx_ptr),
3192                         upper_32_bits(in_ctx_ptr), 0,
3193                         TRB_TYPE(TRB_EVAL_CONTEXT) | SLOT_ID_FOR_TRB(slot_id),
3194                         false);
3195 }
3196
3197 /*
3198  * Suspend is set to indicate "Stop Endpoint Command" is being issued to stop
3199  * activity on an endpoint that is about to be suspended.
3200  */
3201 int xhci_queue_stop_endpoint(struct xhci_hcd *xhci, int slot_id,
3202                 unsigned int ep_index, int suspend)
3203 {
3204         u32 trb_slot_id = SLOT_ID_FOR_TRB(slot_id);
3205         u32 trb_ep_index = EP_ID_FOR_TRB(ep_index);
3206         u32 type = TRB_TYPE(TRB_STOP_RING);
3207         u32 trb_suspend = SUSPEND_PORT_FOR_TRB(suspend);
3208
3209         return queue_command(xhci, 0, 0, 0,
3210                         trb_slot_id | trb_ep_index | type | trb_suspend, false);
3211 }
3212
3213 /* Set Transfer Ring Dequeue Pointer command.
3214  * This should not be used for endpoints that have streams enabled.
3215  */
3216 static int queue_set_tr_deq(struct xhci_hcd *xhci, int slot_id,
3217                 unsigned int ep_index, unsigned int stream_id,
3218                 struct xhci_segment *deq_seg,
3219                 union xhci_trb *deq_ptr, u32 cycle_state)
3220 {
3221         dma_addr_t addr;
3222         u32 trb_slot_id = SLOT_ID_FOR_TRB(slot_id);
3223         u32 trb_ep_index = EP_ID_FOR_TRB(ep_index);
3224         u32 trb_stream_id = STREAM_ID_FOR_TRB(stream_id);
3225         u32 type = TRB_TYPE(TRB_SET_DEQ);
3226
3227         addr = xhci_trb_virt_to_dma(deq_seg, deq_ptr);
3228         if (addr == 0) {
3229                 xhci_warn(xhci, "WARN Cannot submit Set TR Deq Ptr\n");
3230                 xhci_warn(xhci, "WARN deq seg = %p, deq pt = %p\n",
3231                                 deq_seg, deq_ptr);
3232                 return 0;
3233         }
3234         return queue_command(xhci, lower_32_bits(addr) | cycle_state,
3235                         upper_32_bits(addr), trb_stream_id,
3236                         trb_slot_id | trb_ep_index | type, false);
3237 }
3238
3239 int xhci_queue_reset_ep(struct xhci_hcd *xhci, int slot_id,
3240                 unsigned int ep_index)
3241 {
3242         u32 trb_slot_id = SLOT_ID_FOR_TRB(slot_id);
3243         u32 trb_ep_index = EP_ID_FOR_TRB(ep_index);
3244         u32 type = TRB_TYPE(TRB_RESET_EP);
3245
3246         return queue_command(xhci, 0, 0, 0, trb_slot_id | trb_ep_index | type,
3247                         false);
3248 }