netdevice: safe convert to netdev_priv() #part-2
[linux-2.6.git] / drivers / net / irda / nsc-ircc.c
1 /*********************************************************************
2  *                
3  * Filename:      nsc-ircc.c
4  * Version:       1.0
5  * Description:   Driver for the NSC PC'108 and PC'338 IrDA chipsets
6  * Status:        Stable.
7  * Author:        Dag Brattli <dagb@cs.uit.no>
8  * Created at:    Sat Nov  7 21:43:15 1998
9  * Modified at:   Wed Mar  1 11:29:34 2000
10  * Modified by:   Dag Brattli <dagb@cs.uit.no>
11  * 
12  *     Copyright (c) 1998-2000 Dag Brattli <dagb@cs.uit.no>
13  *     Copyright (c) 1998 Lichen Wang, <lwang@actisys.com>
14  *     Copyright (c) 1998 Actisys Corp., www.actisys.com
15  *     Copyright (c) 2000-2004 Jean Tourrilhes <jt@hpl.hp.com>
16  *     All Rights Reserved
17  *      
18  *     This program is free software; you can redistribute it and/or 
19  *     modify it under the terms of the GNU General Public License as 
20  *     published by the Free Software Foundation; either version 2 of 
21  *     the License, or (at your option) any later version.
22  *  
23  *     Neither Dag Brattli nor University of Tromsø admit liability nor
24  *     provide warranty for any of this software. This material is 
25  *     provided "AS-IS" and at no charge.
26  *
27  *     Notice that all functions that needs to access the chip in _any_
28  *     way, must save BSR register on entry, and restore it on exit. 
29  *     It is _very_ important to follow this policy!
30  *
31  *         __u8 bank;
32  *     
33  *         bank = inb(iobase+BSR);
34  *  
35  *         do_your_stuff_here();
36  *
37  *         outb(bank, iobase+BSR);
38  *
39  *    If you find bugs in this file, its very likely that the same bug
40  *    will also be in w83977af_ir.c since the implementations are quite
41  *    similar.
42  *     
43  ********************************************************************/
44
45 #include <linux/module.h>
46
47 #include <linux/kernel.h>
48 #include <linux/types.h>
49 #include <linux/skbuff.h>
50 #include <linux/netdevice.h>
51 #include <linux/ioport.h>
52 #include <linux/delay.h>
53 #include <linux/slab.h>
54 #include <linux/init.h>
55 #include <linux/rtnetlink.h>
56 #include <linux/dma-mapping.h>
57 #include <linux/pnp.h>
58 #include <linux/platform_device.h>
59
60 #include <asm/io.h>
61 #include <asm/dma.h>
62 #include <asm/byteorder.h>
63
64 #include <net/irda/wrapper.h>
65 #include <net/irda/irda.h>
66 #include <net/irda/irda_device.h>
67
68 #include "nsc-ircc.h"
69
70 #define CHIP_IO_EXTENT 8
71 #define BROKEN_DONGLE_ID
72
73 static char *driver_name = "nsc-ircc";
74
75 /* Power Management */
76 #define NSC_IRCC_DRIVER_NAME                  "nsc-ircc"
77 static int nsc_ircc_suspend(struct platform_device *dev, pm_message_t state);
78 static int nsc_ircc_resume(struct platform_device *dev);
79
80 static struct platform_driver nsc_ircc_driver = {
81         .suspend        = nsc_ircc_suspend,
82         .resume         = nsc_ircc_resume,
83         .driver         = {
84                 .name   = NSC_IRCC_DRIVER_NAME,
85         },
86 };
87
88 /* Module parameters */
89 static int qos_mtt_bits = 0x07;  /* 1 ms or more */
90 static int dongle_id;
91
92 /* Use BIOS settions by default, but user may supply module parameters */
93 static unsigned int io[]  = { ~0, ~0, ~0, ~0, ~0 };
94 static unsigned int irq[] = {  0,  0,  0,  0,  0 };
95 static unsigned int dma[] = {  0,  0,  0,  0,  0 };
96
97 static int nsc_ircc_probe_108(nsc_chip_t *chip, chipio_t *info);
98 static int nsc_ircc_probe_338(nsc_chip_t *chip, chipio_t *info);
99 static int nsc_ircc_probe_39x(nsc_chip_t *chip, chipio_t *info);
100 static int nsc_ircc_init_108(nsc_chip_t *chip, chipio_t *info);
101 static int nsc_ircc_init_338(nsc_chip_t *chip, chipio_t *info);
102 static int nsc_ircc_init_39x(nsc_chip_t *chip, chipio_t *info);
103 #ifdef CONFIG_PNP
104 static int nsc_ircc_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *id);
105 #endif
106
107 /* These are the known NSC chips */
108 static nsc_chip_t chips[] = {
109 /*  Name, {cfg registers}, chip id index reg, chip id expected value, revision mask */
110         { "PC87108", { 0x150, 0x398, 0xea }, 0x05, 0x10, 0xf0, 
111           nsc_ircc_probe_108, nsc_ircc_init_108 },
112         { "PC87338", { 0x398, 0x15c, 0x2e }, 0x08, 0xb0, 0xf8, 
113           nsc_ircc_probe_338, nsc_ircc_init_338 },
114         /* Contributed by Steffen Pingel - IBM X40 */
115         { "PC8738x", { 0x164e, 0x4e, 0x2e }, 0x20, 0xf4, 0xff,
116           nsc_ircc_probe_39x, nsc_ircc_init_39x },
117         /* Contributed by Jan Frey - IBM A30/A31 */
118         { "PC8739x", { 0x2e, 0x4e, 0x0 }, 0x20, 0xea, 0xff, 
119           nsc_ircc_probe_39x, nsc_ircc_init_39x },
120         /* IBM ThinkPads using PC8738x (T60/X60/Z60) */
121         { "IBM-PC8738x", { 0x2e, 0x4e, 0x0 }, 0x20, 0xf4, 0xff,
122           nsc_ircc_probe_39x, nsc_ircc_init_39x },
123         /* IBM ThinkPads using PC8394T (T43/R52/?) */
124         { "IBM-PC8394T", { 0x2e, 0x4e, 0x0 }, 0x20, 0xf9, 0xff,
125           nsc_ircc_probe_39x, nsc_ircc_init_39x },
126         { NULL }
127 };
128
129 static struct nsc_ircc_cb *dev_self[] = { NULL, NULL, NULL, NULL, NULL };
130
131 static char *dongle_types[] = {
132         "Differential serial interface",
133         "Differential serial interface",
134         "Reserved",
135         "Reserved",
136         "Sharp RY5HD01",
137         "Reserved",
138         "Single-ended serial interface",
139         "Consumer-IR only",
140         "HP HSDL-2300, HP HSDL-3600/HSDL-3610",
141         "IBM31T1100 or Temic TFDS6000/TFDS6500",
142         "Reserved",
143         "Reserved",
144         "HP HSDL-1100/HSDL-2100",
145         "HP HSDL-1100/HSDL-2100",
146         "Supports SIR Mode only",
147         "No dongle connected",
148 };
149
150 /* PNP probing */
151 static chipio_t pnp_info;
152 static const struct pnp_device_id nsc_ircc_pnp_table[] = {
153         { .id = "NSC6001", .driver_data = 0 },
154         { .id = "HWPC224", .driver_data = 0 },
155         { .id = "IBM0071", .driver_data = NSC_FORCE_DONGLE_TYPE9 },
156         { }
157 };
158
159 MODULE_DEVICE_TABLE(pnp, nsc_ircc_pnp_table);
160
161 static struct pnp_driver nsc_ircc_pnp_driver = {
162 #ifdef CONFIG_PNP
163         .name = "nsc-ircc",
164         .id_table = nsc_ircc_pnp_table,
165         .probe = nsc_ircc_pnp_probe,
166 #endif
167 };
168
169 /* Some prototypes */
170 static int  nsc_ircc_open(chipio_t *info);
171 static int  nsc_ircc_close(struct nsc_ircc_cb *self);
172 static int  nsc_ircc_setup(chipio_t *info);
173 static void nsc_ircc_pio_receive(struct nsc_ircc_cb *self);
174 static int  nsc_ircc_dma_receive(struct nsc_ircc_cb *self); 
175 static int  nsc_ircc_dma_receive_complete(struct nsc_ircc_cb *self, int iobase);
176 static int  nsc_ircc_hard_xmit_sir(struct sk_buff *skb, struct net_device *dev);
177 static int  nsc_ircc_hard_xmit_fir(struct sk_buff *skb, struct net_device *dev);
178 static int  nsc_ircc_pio_write(int iobase, __u8 *buf, int len, int fifo_size);
179 static void nsc_ircc_dma_xmit(struct nsc_ircc_cb *self, int iobase);
180 static __u8 nsc_ircc_change_speed(struct nsc_ircc_cb *self, __u32 baud);
181 static int  nsc_ircc_is_receiving(struct nsc_ircc_cb *self);
182 static int  nsc_ircc_read_dongle_id (int iobase);
183 static void nsc_ircc_init_dongle_interface (int iobase, int dongle_id);
184
185 static int  nsc_ircc_net_open(struct net_device *dev);
186 static int  nsc_ircc_net_close(struct net_device *dev);
187 static int  nsc_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
188 static struct net_device_stats *nsc_ircc_net_get_stats(struct net_device *dev);
189
190 /* Globals */
191 static int pnp_registered;
192 static int pnp_succeeded;
193
194 /*
195  * Function nsc_ircc_init ()
196  *
197  *    Initialize chip. Just try to find out how many chips we are dealing with
198  *    and where they are
199  */
200 static int __init nsc_ircc_init(void)
201 {
202         chipio_t info;
203         nsc_chip_t *chip;
204         int ret;
205         int cfg_base;
206         int cfg, id;
207         int reg;
208         int i = 0;
209
210         ret = platform_driver_register(&nsc_ircc_driver);
211         if (ret) {
212                 IRDA_ERROR("%s, Can't register driver!\n", driver_name);
213                 return ret;
214         }
215
216         /* Register with PnP subsystem to detect disable ports */
217         ret = pnp_register_driver(&nsc_ircc_pnp_driver);
218
219         if (!ret)
220                 pnp_registered = 1;
221
222         ret = -ENODEV;
223
224         /* Probe for all the NSC chipsets we know about */
225         for (chip = chips; chip->name ; chip++) {
226                 IRDA_DEBUG(2, "%s(), Probing for %s ...\n", __func__,
227                            chip->name);
228                 
229                 /* Try all config registers for this chip */
230                 for (cfg = 0; cfg < ARRAY_SIZE(chip->cfg); cfg++) {
231                         cfg_base = chip->cfg[cfg];
232                         if (!cfg_base)
233                                 continue;
234
235                         /* Read index register */
236                         reg = inb(cfg_base);
237                         if (reg == 0xff) {
238                                 IRDA_DEBUG(2, "%s() no chip at 0x%03x\n", __func__, cfg_base);
239                                 continue;
240                         }
241                         
242                         /* Read chip identification register */
243                         outb(chip->cid_index, cfg_base);
244                         id = inb(cfg_base+1);
245                         if ((id & chip->cid_mask) == chip->cid_value) {
246                                 IRDA_DEBUG(2, "%s() Found %s chip, revision=%d\n",
247                                            __func__, chip->name, id & ~chip->cid_mask);
248
249                                 /*
250                                  * If we found a correct PnP setting,
251                                  * we first try it.
252                                  */
253                                 if (pnp_succeeded) {
254                                         memset(&info, 0, sizeof(chipio_t));
255                                         info.cfg_base = cfg_base;
256                                         info.fir_base = pnp_info.fir_base;
257                                         info.dma = pnp_info.dma;
258                                         info.irq = pnp_info.irq;
259
260                                         if (info.fir_base < 0x2000) {
261                                                 IRDA_MESSAGE("%s, chip->init\n", driver_name);
262                                                 chip->init(chip, &info);
263                                         } else
264                                                 chip->probe(chip, &info);
265
266                                         if (nsc_ircc_open(&info) >= 0)
267                                                 ret = 0;
268                                 }
269
270                                 /*
271                                  * Opening based on PnP values failed.
272                                  * Let's fallback to user values, or probe
273                                  * the chip.
274                                  */
275                                 if (ret) {
276                                         IRDA_DEBUG(2, "%s, PnP init failed\n", driver_name);
277                                         memset(&info, 0, sizeof(chipio_t));
278                                         info.cfg_base = cfg_base;
279                                         info.fir_base = io[i];
280                                         info.dma = dma[i];
281                                         info.irq = irq[i];
282
283                                         /*
284                                          * If the user supplies the base address, then
285                                          * we init the chip, if not we probe the values
286                                          * set by the BIOS
287                                          */
288                                         if (io[i] < 0x2000) {
289                                                 chip->init(chip, &info);
290                                         } else
291                                                 chip->probe(chip, &info);
292
293                                         if (nsc_ircc_open(&info) >= 0)
294                                                 ret = 0;
295                                 }
296                                 i++;
297                         } else {
298                                 IRDA_DEBUG(2, "%s(), Wrong chip id=0x%02x\n", __func__, id);
299                         }
300                 } 
301         }
302
303         if (ret) {
304                 platform_driver_unregister(&nsc_ircc_driver);
305                 pnp_unregister_driver(&nsc_ircc_pnp_driver);
306                 pnp_registered = 0;
307         }
308
309         return ret;
310 }
311
312 /*
313  * Function nsc_ircc_cleanup ()
314  *
315  *    Close all configured chips
316  *
317  */
318 static void __exit nsc_ircc_cleanup(void)
319 {
320         int i;
321
322         for (i = 0; i < ARRAY_SIZE(dev_self); i++) {
323                 if (dev_self[i])
324                         nsc_ircc_close(dev_self[i]);
325         }
326
327         platform_driver_unregister(&nsc_ircc_driver);
328
329         if (pnp_registered)
330                 pnp_unregister_driver(&nsc_ircc_pnp_driver);
331
332         pnp_registered = 0;
333 }
334
335 /*
336  * Function nsc_ircc_open (iobase, irq)
337  *
338  *    Open driver instance
339  *
340  */
341 static int __init nsc_ircc_open(chipio_t *info)
342 {
343         struct net_device *dev;
344         struct nsc_ircc_cb *self;
345         void *ret;
346         int err, chip_index;
347
348         IRDA_DEBUG(2, "%s()\n", __func__);
349
350
351         for (chip_index = 0; chip_index < ARRAY_SIZE(dev_self); chip_index++) {
352                 if (!dev_self[chip_index])
353                         break;
354         }
355
356         if (chip_index == ARRAY_SIZE(dev_self)) {
357                 IRDA_ERROR("%s(), maximum number of supported chips reached!\n", __func__);
358                 return -ENOMEM;
359         }
360
361         IRDA_MESSAGE("%s, Found chip at base=0x%03x\n", driver_name,
362                      info->cfg_base);
363
364         if ((nsc_ircc_setup(info)) == -1)
365                 return -1;
366
367         IRDA_MESSAGE("%s, driver loaded (Dag Brattli)\n", driver_name);
368
369         dev = alloc_irdadev(sizeof(struct nsc_ircc_cb));
370         if (dev == NULL) {
371                 IRDA_ERROR("%s(), can't allocate memory for "
372                            "control block!\n", __func__);
373                 return -ENOMEM;
374         }
375
376         self = netdev_priv(dev);
377         self->netdev = dev;
378         spin_lock_init(&self->lock);
379    
380         /* Need to store self somewhere */
381         dev_self[chip_index] = self;
382         self->index = chip_index;
383
384         /* Initialize IO */
385         self->io.cfg_base  = info->cfg_base;
386         self->io.fir_base  = info->fir_base;
387         self->io.irq       = info->irq;
388         self->io.fir_ext   = CHIP_IO_EXTENT;
389         self->io.dma       = info->dma;
390         self->io.fifo_size = 32;
391         
392         /* Reserve the ioports that we need */
393         ret = request_region(self->io.fir_base, self->io.fir_ext, driver_name);
394         if (!ret) {
395                 IRDA_WARNING("%s(), can't get iobase of 0x%03x\n",
396                              __func__, self->io.fir_base);
397                 err = -ENODEV;
398                 goto out1;
399         }
400
401         /* Initialize QoS for this device */
402         irda_init_max_qos_capabilies(&self->qos);
403         
404         /* The only value we must override it the baudrate */
405         self->qos.baud_rate.bits = IR_9600|IR_19200|IR_38400|IR_57600|
406                 IR_115200|IR_576000|IR_1152000 |(IR_4000000 << 8);
407         
408         self->qos.min_turn_time.bits = qos_mtt_bits;
409         irda_qos_bits_to_value(&self->qos);
410         
411         /* Max DMA buffer size needed = (data_size + 6) * (window_size) + 6; */
412         self->rx_buff.truesize = 14384; 
413         self->tx_buff.truesize = 14384;
414
415         /* Allocate memory if needed */
416         self->rx_buff.head =
417                 dma_alloc_coherent(NULL, self->rx_buff.truesize,
418                                    &self->rx_buff_dma, GFP_KERNEL);
419         if (self->rx_buff.head == NULL) {
420                 err = -ENOMEM;
421                 goto out2;
422
423         }
424         memset(self->rx_buff.head, 0, self->rx_buff.truesize);
425         
426         self->tx_buff.head =
427                 dma_alloc_coherent(NULL, self->tx_buff.truesize,
428                                    &self->tx_buff_dma, GFP_KERNEL);
429         if (self->tx_buff.head == NULL) {
430                 err = -ENOMEM;
431                 goto out3;
432         }
433         memset(self->tx_buff.head, 0, self->tx_buff.truesize);
434
435         self->rx_buff.in_frame = FALSE;
436         self->rx_buff.state = OUTSIDE_FRAME;
437         self->tx_buff.data = self->tx_buff.head;
438         self->rx_buff.data = self->rx_buff.head;
439         
440         /* Reset Tx queue info */
441         self->tx_fifo.len = self->tx_fifo.ptr = self->tx_fifo.free = 0;
442         self->tx_fifo.tail = self->tx_buff.head;
443
444         /* Override the network functions we need to use */
445         dev->hard_start_xmit = nsc_ircc_hard_xmit_sir;
446         dev->open            = nsc_ircc_net_open;
447         dev->stop            = nsc_ircc_net_close;
448         dev->do_ioctl        = nsc_ircc_net_ioctl;
449         dev->get_stats       = nsc_ircc_net_get_stats;
450
451         err = register_netdev(dev);
452         if (err) {
453                 IRDA_ERROR("%s(), register_netdev() failed!\n", __func__);
454                 goto out4;
455         }
456         IRDA_MESSAGE("IrDA: Registered device %s\n", dev->name);
457
458         /* Check if user has supplied a valid dongle id or not */
459         if ((dongle_id <= 0) ||
460             (dongle_id >= ARRAY_SIZE(dongle_types))) {
461                 dongle_id = nsc_ircc_read_dongle_id(self->io.fir_base);
462                 
463                 IRDA_MESSAGE("%s, Found dongle: %s\n", driver_name,
464                              dongle_types[dongle_id]);
465         } else {
466                 IRDA_MESSAGE("%s, Using dongle: %s\n", driver_name,
467                              dongle_types[dongle_id]);
468         }
469         
470         self->io.dongle_id = dongle_id;
471         nsc_ircc_init_dongle_interface(self->io.fir_base, dongle_id);
472
473         self->pldev = platform_device_register_simple(NSC_IRCC_DRIVER_NAME,
474                                                       self->index, NULL, 0);
475         if (IS_ERR(self->pldev)) {
476                 err = PTR_ERR(self->pldev);
477                 goto out5;
478         }
479         platform_set_drvdata(self->pldev, self);
480
481         return chip_index;
482
483  out5:
484         unregister_netdev(dev);
485  out4:
486         dma_free_coherent(NULL, self->tx_buff.truesize,
487                           self->tx_buff.head, self->tx_buff_dma);
488  out3:
489         dma_free_coherent(NULL, self->rx_buff.truesize,
490                           self->rx_buff.head, self->rx_buff_dma);
491  out2:
492         release_region(self->io.fir_base, self->io.fir_ext);
493  out1:
494         free_netdev(dev);
495         dev_self[chip_index] = NULL;
496         return err;
497 }
498
499 /*
500  * Function nsc_ircc_close (self)
501  *
502  *    Close driver instance
503  *
504  */
505 static int __exit nsc_ircc_close(struct nsc_ircc_cb *self)
506 {
507         int iobase;
508
509         IRDA_DEBUG(4, "%s()\n", __func__);
510
511         IRDA_ASSERT(self != NULL, return -1;);
512
513         iobase = self->io.fir_base;
514
515         platform_device_unregister(self->pldev);
516
517         /* Remove netdevice */
518         unregister_netdev(self->netdev);
519
520         /* Release the PORT that this driver is using */
521         IRDA_DEBUG(4, "%s(), Releasing Region %03x\n", 
522                    __func__, self->io.fir_base);
523         release_region(self->io.fir_base, self->io.fir_ext);
524
525         if (self->tx_buff.head)
526                 dma_free_coherent(NULL, self->tx_buff.truesize,
527                                   self->tx_buff.head, self->tx_buff_dma);
528         
529         if (self->rx_buff.head)
530                 dma_free_coherent(NULL, self->rx_buff.truesize,
531                                   self->rx_buff.head, self->rx_buff_dma);
532
533         dev_self[self->index] = NULL;
534         free_netdev(self->netdev);
535         
536         return 0;
537 }
538
539 /*
540  * Function nsc_ircc_init_108 (iobase, cfg_base, irq, dma)
541  *
542  *    Initialize the NSC '108 chip
543  *
544  */
545 static int nsc_ircc_init_108(nsc_chip_t *chip, chipio_t *info)
546 {
547         int cfg_base = info->cfg_base;
548         __u8 temp=0;
549
550         outb(2, cfg_base);      /* Mode Control Register (MCTL) */
551         outb(0x00, cfg_base+1); /* Disable device */
552         
553         /* Base Address and Interrupt Control Register (BAIC) */
554         outb(CFG_108_BAIC, cfg_base);
555         switch (info->fir_base) {
556         case 0x3e8: outb(0x14, cfg_base+1); break;
557         case 0x2e8: outb(0x15, cfg_base+1); break;
558         case 0x3f8: outb(0x16, cfg_base+1); break;
559         case 0x2f8: outb(0x17, cfg_base+1); break;
560         default: IRDA_ERROR("%s(), invalid base_address", __func__);
561         }
562         
563         /* Control Signal Routing Register (CSRT) */
564         switch (info->irq) {
565         case 3:  temp = 0x01; break;
566         case 4:  temp = 0x02; break;
567         case 5:  temp = 0x03; break;
568         case 7:  temp = 0x04; break;
569         case 9:  temp = 0x05; break;
570         case 11: temp = 0x06; break;
571         case 15: temp = 0x07; break;
572         default: IRDA_ERROR("%s(), invalid irq", __func__);
573         }
574         outb(CFG_108_CSRT, cfg_base);
575         
576         switch (info->dma) {    
577         case 0: outb(0x08+temp, cfg_base+1); break;
578         case 1: outb(0x10+temp, cfg_base+1); break;
579         case 3: outb(0x18+temp, cfg_base+1); break;
580         default: IRDA_ERROR("%s(), invalid dma", __func__);
581         }
582         
583         outb(CFG_108_MCTL, cfg_base);      /* Mode Control Register (MCTL) */
584         outb(0x03, cfg_base+1); /* Enable device */
585
586         return 0;
587 }
588
589 /*
590  * Function nsc_ircc_probe_108 (chip, info)
591  *
592  *    
593  *
594  */
595 static int nsc_ircc_probe_108(nsc_chip_t *chip, chipio_t *info) 
596 {
597         int cfg_base = info->cfg_base;
598         int reg;
599
600         /* Read address and interrupt control register (BAIC) */
601         outb(CFG_108_BAIC, cfg_base);
602         reg = inb(cfg_base+1);
603         
604         switch (reg & 0x03) {
605         case 0:
606                 info->fir_base = 0x3e8;
607                 break;
608         case 1:
609                 info->fir_base = 0x2e8;
610                 break;
611         case 2:
612                 info->fir_base = 0x3f8;
613                 break;
614         case 3:
615                 info->fir_base = 0x2f8;
616                 break;
617         }
618         info->sir_base = info->fir_base;
619         IRDA_DEBUG(2, "%s(), probing fir_base=0x%03x\n", __func__,
620                    info->fir_base);
621
622         /* Read control signals routing register (CSRT) */
623         outb(CFG_108_CSRT, cfg_base);
624         reg = inb(cfg_base+1);
625
626         switch (reg & 0x07) {
627         case 0:
628                 info->irq = -1;
629                 break;
630         case 1:
631                 info->irq = 3;
632                 break;
633         case 2:
634                 info->irq = 4;
635                 break;
636         case 3:
637                 info->irq = 5;
638                 break;
639         case 4:
640                 info->irq = 7;
641                 break;
642         case 5:
643                 info->irq = 9;
644                 break;
645         case 6:
646                 info->irq = 11;
647                 break;
648         case 7:
649                 info->irq = 15;
650                 break;
651         }
652         IRDA_DEBUG(2, "%s(), probing irq=%d\n", __func__, info->irq);
653
654         /* Currently we only read Rx DMA but it will also be used for Tx */
655         switch ((reg >> 3) & 0x03) {
656         case 0:
657                 info->dma = -1;
658                 break;
659         case 1:
660                 info->dma = 0;
661                 break;
662         case 2:
663                 info->dma = 1;
664                 break;
665         case 3:
666                 info->dma = 3;
667                 break;
668         }
669         IRDA_DEBUG(2, "%s(), probing dma=%d\n", __func__, info->dma);
670
671         /* Read mode control register (MCTL) */
672         outb(CFG_108_MCTL, cfg_base);
673         reg = inb(cfg_base+1);
674
675         info->enabled = reg & 0x01;
676         info->suspended = !((reg >> 1) & 0x01);
677
678         return 0;
679 }
680
681 /*
682  * Function nsc_ircc_init_338 (chip, info)
683  *
684  *    Initialize the NSC '338 chip. Remember that the 87338 needs two 
685  *    consecutive writes to the data registers while CPU interrupts are
686  *    disabled. The 97338 does not require this, but shouldn't be any
687  *    harm if we do it anyway.
688  */
689 static int nsc_ircc_init_338(nsc_chip_t *chip, chipio_t *info) 
690 {
691         /* No init yet */
692         
693         return 0;
694 }
695
696 /*
697  * Function nsc_ircc_probe_338 (chip, info)
698  *
699  *    
700  *
701  */
702 static int nsc_ircc_probe_338(nsc_chip_t *chip, chipio_t *info) 
703 {
704         int cfg_base = info->cfg_base;
705         int reg, com = 0;
706         int pnp;
707
708         /* Read funtion enable register (FER) */
709         outb(CFG_338_FER, cfg_base);
710         reg = inb(cfg_base+1);
711
712         info->enabled = (reg >> 2) & 0x01;
713
714         /* Check if we are in Legacy or PnP mode */
715         outb(CFG_338_PNP0, cfg_base);
716         reg = inb(cfg_base+1);
717         
718         pnp = (reg >> 3) & 0x01;
719         if (pnp) {
720                 IRDA_DEBUG(2, "(), Chip is in PnP mode\n");
721                 outb(0x46, cfg_base);
722                 reg = (inb(cfg_base+1) & 0xfe) << 2;
723
724                 outb(0x47, cfg_base);
725                 reg |= ((inb(cfg_base+1) & 0xfc) << 8);
726
727                 info->fir_base = reg;
728         } else {
729                 /* Read function address register (FAR) */
730                 outb(CFG_338_FAR, cfg_base);
731                 reg = inb(cfg_base+1);
732                 
733                 switch ((reg >> 4) & 0x03) {
734                 case 0:
735                         info->fir_base = 0x3f8;
736                         break;
737                 case 1:
738                         info->fir_base = 0x2f8;
739                         break;
740                 case 2:
741                         com = 3;
742                         break;
743                 case 3:
744                         com = 4;
745                         break;
746                 }
747                 
748                 if (com) {
749                         switch ((reg >> 6) & 0x03) {
750                         case 0:
751                                 if (com == 3)
752                                         info->fir_base = 0x3e8;
753                                 else
754                                         info->fir_base = 0x2e8;
755                                 break;
756                         case 1:
757                                 if (com == 3)
758                                         info->fir_base = 0x338;
759                                 else
760                                         info->fir_base = 0x238;
761                                 break;
762                         case 2:
763                                 if (com == 3)
764                                         info->fir_base = 0x2e8;
765                                 else
766                                         info->fir_base = 0x2e0;
767                                 break;
768                         case 3:
769                                 if (com == 3)
770                                         info->fir_base = 0x220;
771                                 else
772                                         info->fir_base = 0x228;
773                                 break;
774                         }
775                 }
776         }
777         info->sir_base = info->fir_base;
778
779         /* Read PnP register 1 (PNP1) */
780         outb(CFG_338_PNP1, cfg_base);
781         reg = inb(cfg_base+1);
782         
783         info->irq = reg >> 4;
784         
785         /* Read PnP register 3 (PNP3) */
786         outb(CFG_338_PNP3, cfg_base);
787         reg = inb(cfg_base+1);
788
789         info->dma = (reg & 0x07) - 1;
790
791         /* Read power and test register (PTR) */
792         outb(CFG_338_PTR, cfg_base);
793         reg = inb(cfg_base+1);
794
795         info->suspended = reg & 0x01;
796
797         return 0;
798 }
799
800
801 /*
802  * Function nsc_ircc_init_39x (chip, info)
803  *
804  *    Now that we know it's a '39x (see probe below), we need to
805  *    configure it so we can use it.
806  *
807  * The NSC '338 chip is a Super I/O chip with a "bank" architecture,
808  * the configuration of the different functionality (serial, parallel,
809  * floppy...) are each in a different bank (Logical Device Number).
810  * The base address, irq and dma configuration registers are common
811  * to all functionalities (index 0x30 to 0x7F).
812  * There is only one configuration register specific to the
813  * serial port, CFG_39X_SPC.
814  * JeanII
815  *
816  * Note : this code was written by Jan Frey <janfrey@web.de>
817  */
818 static int nsc_ircc_init_39x(nsc_chip_t *chip, chipio_t *info) 
819 {
820         int cfg_base = info->cfg_base;
821         int enabled;
822
823         /* User is sure about his config... accept it. */
824         IRDA_DEBUG(2, "%s(): nsc_ircc_init_39x (user settings): "
825                    "io=0x%04x, irq=%d, dma=%d\n", 
826                    __func__, info->fir_base, info->irq, info->dma);
827
828         /* Access bank for SP2 */
829         outb(CFG_39X_LDN, cfg_base);
830         outb(0x02, cfg_base+1);
831
832         /* Configure SP2 */
833
834         /* We want to enable the device if not enabled */
835         outb(CFG_39X_ACT, cfg_base);
836         enabled = inb(cfg_base+1) & 0x01;
837         
838         if (!enabled) {
839                 /* Enable the device */
840                 outb(CFG_39X_SIOCF1, cfg_base);
841                 outb(0x01, cfg_base+1);
842                 /* May want to update info->enabled. Jean II */
843         }
844
845         /* Enable UART bank switching (bit 7) ; Sets the chip to normal
846          * power mode (wake up from sleep mode) (bit 1) */
847         outb(CFG_39X_SPC, cfg_base);
848         outb(0x82, cfg_base+1);
849
850         return 0;
851 }
852
853 /*
854  * Function nsc_ircc_probe_39x (chip, info)
855  *
856  *    Test if we really have a '39x chip at the given address
857  *
858  * Note : this code was written by Jan Frey <janfrey@web.de>
859  */
860 static int nsc_ircc_probe_39x(nsc_chip_t *chip, chipio_t *info) 
861 {
862         int cfg_base = info->cfg_base;
863         int reg1, reg2, irq, irqt, dma1, dma2;
864         int enabled, susp;
865
866         IRDA_DEBUG(2, "%s(), nsc_ircc_probe_39x, base=%d\n",
867                    __func__, cfg_base);
868
869         /* This function should be executed with irq off to avoid
870          * another driver messing with the Super I/O bank - Jean II */
871
872         /* Access bank for SP2 */
873         outb(CFG_39X_LDN, cfg_base);
874         outb(0x02, cfg_base+1);
875
876         /* Read infos about SP2 ; store in info struct */
877         outb(CFG_39X_BASEH, cfg_base);
878         reg1 = inb(cfg_base+1);
879         outb(CFG_39X_BASEL, cfg_base);
880         reg2 = inb(cfg_base+1);
881         info->fir_base = (reg1 << 8) | reg2;
882
883         outb(CFG_39X_IRQNUM, cfg_base);
884         irq = inb(cfg_base+1);
885         outb(CFG_39X_IRQSEL, cfg_base);
886         irqt = inb(cfg_base+1);
887         info->irq = irq;
888
889         outb(CFG_39X_DMA0, cfg_base);
890         dma1 = inb(cfg_base+1);
891         outb(CFG_39X_DMA1, cfg_base);
892         dma2 = inb(cfg_base+1);
893         info->dma = dma1 -1;
894
895         outb(CFG_39X_ACT, cfg_base);
896         info->enabled = enabled = inb(cfg_base+1) & 0x01;
897         
898         outb(CFG_39X_SPC, cfg_base);
899         susp = 1 - ((inb(cfg_base+1) & 0x02) >> 1);
900
901         IRDA_DEBUG(2, "%s(): io=0x%02x%02x, irq=%d (type %d), rxdma=%d, txdma=%d, enabled=%d (suspended=%d)\n", __func__, reg1,reg2,irq,irqt,dma1,dma2,enabled,susp);
902
903         /* Configure SP2 */
904
905         /* We want to enable the device if not enabled */
906         outb(CFG_39X_ACT, cfg_base);
907         enabled = inb(cfg_base+1) & 0x01;
908         
909         if (!enabled) {
910                 /* Enable the device */
911                 outb(CFG_39X_SIOCF1, cfg_base);
912                 outb(0x01, cfg_base+1);
913                 /* May want to update info->enabled. Jean II */
914         }
915
916         /* Enable UART bank switching (bit 7) ; Sets the chip to normal
917          * power mode (wake up from sleep mode) (bit 1) */
918         outb(CFG_39X_SPC, cfg_base);
919         outb(0x82, cfg_base+1);
920
921         return 0;
922 }
923
924 #ifdef CONFIG_PNP
925 /* PNP probing */
926 static int nsc_ircc_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *id)
927 {
928         memset(&pnp_info, 0, sizeof(chipio_t));
929         pnp_info.irq = -1;
930         pnp_info.dma = -1;
931         pnp_succeeded = 1;
932
933         if (id->driver_data & NSC_FORCE_DONGLE_TYPE9)
934                 dongle_id = 0x9;
935
936         /* There doesn't seem to be any way of getting the cfg_base.
937          * On my box, cfg_base is in the PnP descriptor of the
938          * motherboard. Oh well... Jean II */
939
940         if (pnp_port_valid(dev, 0) &&
941                 !(pnp_port_flags(dev, 0) & IORESOURCE_DISABLED))
942                 pnp_info.fir_base = pnp_port_start(dev, 0);
943
944         if (pnp_irq_valid(dev, 0) &&
945                 !(pnp_irq_flags(dev, 0) & IORESOURCE_DISABLED))
946                 pnp_info.irq = pnp_irq(dev, 0);
947
948         if (pnp_dma_valid(dev, 0) &&
949                 !(pnp_dma_flags(dev, 0) & IORESOURCE_DISABLED))
950                 pnp_info.dma = pnp_dma(dev, 0);
951
952         IRDA_DEBUG(0, "%s() : From PnP, found firbase 0x%03X ; irq %d ; dma %d.\n",
953                    __func__, pnp_info.fir_base, pnp_info.irq, pnp_info.dma);
954
955         if((pnp_info.fir_base == 0) ||
956            (pnp_info.irq == -1) || (pnp_info.dma == -1)) {
957                 /* Returning an error will disable the device. Yuck ! */
958                 //return -EINVAL;
959                 pnp_succeeded = 0;
960         }
961
962         return 0;
963 }
964 #endif
965
966 /*
967  * Function nsc_ircc_setup (info)
968  *
969  *    Returns non-negative on success.
970  *
971  */
972 static int nsc_ircc_setup(chipio_t *info)
973 {
974         int version;
975         int iobase = info->fir_base;
976
977         /* Read the Module ID */
978         switch_bank(iobase, BANK3);
979         version = inb(iobase+MID);
980
981         IRDA_DEBUG(2, "%s() Driver %s Found chip version %02x\n",
982                    __func__, driver_name, version);
983
984         /* Should be 0x2? */
985         if (0x20 != (version & 0xf0)) {
986                 IRDA_ERROR("%s, Wrong chip version %02x\n",
987                            driver_name, version);
988                 return -1;
989         }
990
991         /* Switch to advanced mode */
992         switch_bank(iobase, BANK2);
993         outb(ECR1_EXT_SL, iobase+ECR1);
994         switch_bank(iobase, BANK0);
995         
996         /* Set FIFO threshold to TX17, RX16, reset and enable FIFO's */
997         switch_bank(iobase, BANK0);
998         outb(FCR_RXTH|FCR_TXTH|FCR_TXSR|FCR_RXSR|FCR_FIFO_EN, iobase+FCR);
999
1000         outb(0x03, iobase+LCR);         /* 8 bit word length */
1001         outb(MCR_SIR, iobase+MCR);      /* Start at SIR-mode, also clears LSR*/
1002
1003         /* Set FIFO size to 32 */
1004         switch_bank(iobase, BANK2);
1005         outb(EXCR2_RFSIZ|EXCR2_TFSIZ, iobase+EXCR2);
1006
1007         /* IRCR2: FEND_MD is not set */
1008         switch_bank(iobase, BANK5);
1009         outb(0x02, iobase+4);
1010
1011         /* Make sure that some defaults are OK */
1012         switch_bank(iobase, BANK6);
1013         outb(0x20, iobase+0); /* Set 32 bits FIR CRC */
1014         outb(0x0a, iobase+1); /* Set MIR pulse width */
1015         outb(0x0d, iobase+2); /* Set SIR pulse width to 1.6us */
1016         outb(0x2a, iobase+4); /* Set beginning frag, and preamble length */
1017
1018         /* Enable receive interrupts */
1019         switch_bank(iobase, BANK0);
1020         outb(IER_RXHDL_IE, iobase+IER);
1021
1022         return 0;
1023 }
1024
1025 /*
1026  * Function nsc_ircc_read_dongle_id (void)
1027  *
1028  * Try to read dongle indentification. This procedure needs to be executed
1029  * once after power-on/reset. It also needs to be used whenever you suspect
1030  * that the user may have plugged/unplugged the IrDA Dongle.
1031  */
1032 static int nsc_ircc_read_dongle_id (int iobase)
1033 {
1034         int dongle_id;
1035         __u8 bank;
1036
1037         bank = inb(iobase+BSR);
1038
1039         /* Select Bank 7 */
1040         switch_bank(iobase, BANK7);
1041         
1042         /* IRCFG4: IRSL0_DS and IRSL21_DS are cleared */
1043         outb(0x00, iobase+7);
1044         
1045         /* ID0, 1, and 2 are pulled up/down very slowly */
1046         udelay(50);
1047         
1048         /* IRCFG1: read the ID bits */
1049         dongle_id = inb(iobase+4) & 0x0f;
1050
1051 #ifdef BROKEN_DONGLE_ID
1052         if (dongle_id == 0x0a)
1053                 dongle_id = 0x09;
1054 #endif  
1055         /* Go back to  bank 0 before returning */
1056         switch_bank(iobase, BANK0);
1057
1058         outb(bank, iobase+BSR);
1059
1060         return dongle_id;
1061 }
1062
1063 /*
1064  * Function nsc_ircc_init_dongle_interface (iobase, dongle_id)
1065  *
1066  *     This function initializes the dongle for the transceiver that is
1067  *     used. This procedure needs to be executed once after
1068  *     power-on/reset. It also needs to be used whenever you suspect that
1069  *     the dongle is changed. 
1070  */
1071 static void nsc_ircc_init_dongle_interface (int iobase, int dongle_id)
1072 {
1073         int bank;
1074
1075         /* Save current bank */
1076         bank = inb(iobase+BSR);
1077
1078         /* Select Bank 7 */
1079         switch_bank(iobase, BANK7);
1080         
1081         /* IRCFG4: set according to dongle_id */
1082         switch (dongle_id) {
1083         case 0x00: /* same as */
1084         case 0x01: /* Differential serial interface */
1085                 IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
1086                            __func__, dongle_types[dongle_id]);
1087                 break;
1088         case 0x02: /* same as */
1089         case 0x03: /* Reserved */
1090                 IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
1091                            __func__, dongle_types[dongle_id]);
1092                 break;
1093         case 0x04: /* Sharp RY5HD01 */
1094                 break;
1095         case 0x05: /* Reserved, but this is what the Thinkpad reports */
1096                 IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
1097                            __func__, dongle_types[dongle_id]);
1098                 break;
1099         case 0x06: /* Single-ended serial interface */
1100                 IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
1101                            __func__, dongle_types[dongle_id]);
1102                 break;
1103         case 0x07: /* Consumer-IR only */
1104                 IRDA_DEBUG(0, "%s(), %s is not for IrDA mode\n",
1105                            __func__, dongle_types[dongle_id]);
1106                 break;
1107         case 0x08: /* HP HSDL-2300, HP HSDL-3600/HSDL-3610 */
1108                 IRDA_DEBUG(0, "%s(), %s\n",
1109                            __func__, dongle_types[dongle_id]);
1110                 break;
1111         case 0x09: /* IBM31T1100 or Temic TFDS6000/TFDS6500 */
1112                 outb(0x28, iobase+7); /* Set irsl[0-2] as output */
1113                 break;
1114         case 0x0A: /* same as */
1115         case 0x0B: /* Reserved */
1116                 IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
1117                            __func__, dongle_types[dongle_id]);
1118                 break;
1119         case 0x0C: /* same as */
1120         case 0x0D: /* HP HSDL-1100/HSDL-2100 */
1121                 /* 
1122                  * Set irsl0 as input, irsl[1-2] as output, and separate 
1123                  * inputs are used for SIR and MIR/FIR 
1124                  */
1125                 outb(0x48, iobase+7); 
1126                 break;
1127         case 0x0E: /* Supports SIR Mode only */
1128                 outb(0x28, iobase+7); /* Set irsl[0-2] as output */
1129                 break;
1130         case 0x0F: /* No dongle connected */
1131                 IRDA_DEBUG(0, "%s(), %s\n",
1132                            __func__, dongle_types[dongle_id]);
1133
1134                 switch_bank(iobase, BANK0);
1135                 outb(0x62, iobase+MCR);
1136                 break;
1137         default: 
1138                 IRDA_DEBUG(0, "%s(), invalid dongle_id %#x", 
1139                            __func__, dongle_id);
1140         }
1141         
1142         /* IRCFG1: IRSL1 and 2 are set to IrDA mode */
1143         outb(0x00, iobase+4);
1144
1145         /* Restore bank register */
1146         outb(bank, iobase+BSR);
1147         
1148 } /* set_up_dongle_interface */
1149
1150 /*
1151  * Function nsc_ircc_change_dongle_speed (iobase, speed, dongle_id)
1152  *
1153  *    Change speed of the attach dongle
1154  *
1155  */
1156 static void nsc_ircc_change_dongle_speed(int iobase, int speed, int dongle_id)
1157 {
1158         __u8 bank;
1159
1160         /* Save current bank */
1161         bank = inb(iobase+BSR);
1162
1163         /* Select Bank 7 */
1164         switch_bank(iobase, BANK7);
1165         
1166         /* IRCFG1: set according to dongle_id */
1167         switch (dongle_id) {
1168         case 0x00: /* same as */
1169         case 0x01: /* Differential serial interface */
1170                 IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
1171                            __func__, dongle_types[dongle_id]);
1172                 break;
1173         case 0x02: /* same as */
1174         case 0x03: /* Reserved */
1175                 IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
1176                            __func__, dongle_types[dongle_id]);
1177                 break;
1178         case 0x04: /* Sharp RY5HD01 */
1179                 break;
1180         case 0x05: /* Reserved */
1181                 IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
1182                            __func__, dongle_types[dongle_id]);
1183                 break;
1184         case 0x06: /* Single-ended serial interface */
1185                 IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
1186                            __func__, dongle_types[dongle_id]);
1187                 break;
1188         case 0x07: /* Consumer-IR only */
1189                 IRDA_DEBUG(0, "%s(), %s is not for IrDA mode\n",
1190                            __func__, dongle_types[dongle_id]);
1191                 break;
1192         case 0x08: /* HP HSDL-2300, HP HSDL-3600/HSDL-3610 */
1193                 IRDA_DEBUG(0, "%s(), %s\n", 
1194                            __func__, dongle_types[dongle_id]);
1195                 outb(0x00, iobase+4);
1196                 if (speed > 115200)
1197                         outb(0x01, iobase+4);
1198                 break;
1199         case 0x09: /* IBM31T1100 or Temic TFDS6000/TFDS6500 */
1200                 outb(0x01, iobase+4);
1201
1202                 if (speed == 4000000) {
1203                         /* There was a cli() there, but we now are already
1204                          * under spin_lock_irqsave() - JeanII */
1205                         outb(0x81, iobase+4);
1206                         outb(0x80, iobase+4);
1207                 } else
1208                         outb(0x00, iobase+4);
1209                 break;
1210         case 0x0A: /* same as */
1211         case 0x0B: /* Reserved */
1212                 IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
1213                            __func__, dongle_types[dongle_id]);
1214                 break;
1215         case 0x0C: /* same as */
1216         case 0x0D: /* HP HSDL-1100/HSDL-2100 */
1217                 break;
1218         case 0x0E: /* Supports SIR Mode only */
1219                 break;
1220         case 0x0F: /* No dongle connected */
1221                 IRDA_DEBUG(0, "%s(), %s is not for IrDA mode\n",
1222                            __func__, dongle_types[dongle_id]);
1223
1224                 switch_bank(iobase, BANK0); 
1225                 outb(0x62, iobase+MCR);
1226                 break;
1227         default: 
1228                 IRDA_DEBUG(0, "%s(), invalid data_rate\n", __func__);
1229         }
1230         /* Restore bank register */
1231         outb(bank, iobase+BSR);
1232 }
1233
1234 /*
1235  * Function nsc_ircc_change_speed (self, baud)
1236  *
1237  *    Change the speed of the device
1238  *
1239  * This function *must* be called with irq off and spin-lock.
1240  */
1241 static __u8 nsc_ircc_change_speed(struct nsc_ircc_cb *self, __u32 speed)
1242 {
1243         struct net_device *dev = self->netdev;
1244         __u8 mcr = MCR_SIR;
1245         int iobase; 
1246         __u8 bank;
1247         __u8 ier;                  /* Interrupt enable register */
1248
1249         IRDA_DEBUG(2, "%s(), speed=%d\n", __func__, speed);
1250
1251         IRDA_ASSERT(self != NULL, return 0;);
1252
1253         iobase = self->io.fir_base;
1254
1255         /* Update accounting for new speed */
1256         self->io.speed = speed;
1257
1258         /* Save current bank */
1259         bank = inb(iobase+BSR);
1260
1261         /* Disable interrupts */
1262         switch_bank(iobase, BANK0);
1263         outb(0, iobase+IER);
1264
1265         /* Select Bank 2 */
1266         switch_bank(iobase, BANK2);
1267
1268         outb(0x00, iobase+BGDH);
1269         switch (speed) {
1270         case 9600:   outb(0x0c, iobase+BGDL); break;
1271         case 19200:  outb(0x06, iobase+BGDL); break;
1272         case 38400:  outb(0x03, iobase+BGDL); break;
1273         case 57600:  outb(0x02, iobase+BGDL); break;
1274         case 115200: outb(0x01, iobase+BGDL); break;
1275         case 576000:
1276                 switch_bank(iobase, BANK5);
1277                 
1278                 /* IRCR2: MDRS is set */
1279                 outb(inb(iobase+4) | 0x04, iobase+4);
1280                
1281                 mcr = MCR_MIR;
1282                 IRDA_DEBUG(0, "%s(), handling baud of 576000\n", __func__);
1283                 break;
1284         case 1152000:
1285                 mcr = MCR_MIR;
1286                 IRDA_DEBUG(0, "%s(), handling baud of 1152000\n", __func__);
1287                 break;
1288         case 4000000:
1289                 mcr = MCR_FIR;
1290                 IRDA_DEBUG(0, "%s(), handling baud of 4000000\n", __func__);
1291                 break;
1292         default:
1293                 mcr = MCR_FIR;
1294                 IRDA_DEBUG(0, "%s(), unknown baud rate of %d\n", 
1295                            __func__, speed);
1296                 break;
1297         }
1298
1299         /* Set appropriate speed mode */
1300         switch_bank(iobase, BANK0);
1301         outb(mcr | MCR_TX_DFR, iobase+MCR);
1302
1303         /* Give some hits to the transceiver */
1304         nsc_ircc_change_dongle_speed(iobase, speed, self->io.dongle_id);
1305
1306         /* Set FIFO threshold to TX17, RX16 */
1307         switch_bank(iobase, BANK0);
1308         outb(0x00, iobase+FCR);
1309         outb(FCR_FIFO_EN, iobase+FCR);
1310         outb(FCR_RXTH|     /* Set Rx FIFO threshold */
1311              FCR_TXTH|     /* Set Tx FIFO threshold */
1312              FCR_TXSR|     /* Reset Tx FIFO */
1313              FCR_RXSR|     /* Reset Rx FIFO */
1314              FCR_FIFO_EN,  /* Enable FIFOs */
1315              iobase+FCR);
1316         
1317         /* Set FIFO size to 32 */
1318         switch_bank(iobase, BANK2);
1319         outb(EXCR2_RFSIZ|EXCR2_TFSIZ, iobase+EXCR2);
1320         
1321         /* Enable some interrupts so we can receive frames */
1322         switch_bank(iobase, BANK0); 
1323         if (speed > 115200) {
1324                 /* Install FIR xmit handler */
1325                 dev->hard_start_xmit = nsc_ircc_hard_xmit_fir;
1326                 ier = IER_SFIF_IE;
1327                 nsc_ircc_dma_receive(self);
1328         } else {
1329                 /* Install SIR xmit handler */
1330                 dev->hard_start_xmit = nsc_ircc_hard_xmit_sir;
1331                 ier = IER_RXHDL_IE;
1332         }
1333         /* Set our current interrupt mask */
1334         outb(ier, iobase+IER);
1335         
1336         /* Restore BSR */
1337         outb(bank, iobase+BSR);
1338
1339         /* Make sure interrupt handlers keep the proper interrupt mask */
1340         return(ier);
1341 }
1342
1343 /*
1344  * Function nsc_ircc_hard_xmit (skb, dev)
1345  *
1346  *    Transmit the frame!
1347  *
1348  */
1349 static int nsc_ircc_hard_xmit_sir(struct sk_buff *skb, struct net_device *dev)
1350 {
1351         struct nsc_ircc_cb *self;
1352         unsigned long flags;
1353         int iobase;
1354         __s32 speed;
1355         __u8 bank;
1356         
1357         self = netdev_priv(dev);
1358
1359         IRDA_ASSERT(self != NULL, return 0;);
1360
1361         iobase = self->io.fir_base;
1362
1363         netif_stop_queue(dev);
1364                 
1365         /* Make sure tests *& speed change are atomic */
1366         spin_lock_irqsave(&self->lock, flags);
1367         
1368         /* Check if we need to change the speed */
1369         speed = irda_get_next_speed(skb);
1370         if ((speed != self->io.speed) && (speed != -1)) {
1371                 /* Check for empty frame. */
1372                 if (!skb->len) {
1373                         /* If we just sent a frame, we get called before
1374                          * the last bytes get out (because of the SIR FIFO).
1375                          * If this is the case, let interrupt handler change
1376                          * the speed itself... Jean II */
1377                         if (self->io.direction == IO_RECV) {
1378                                 nsc_ircc_change_speed(self, speed); 
1379                                 /* TODO : For SIR->SIR, the next packet
1380                                  * may get corrupted - Jean II */
1381                                 netif_wake_queue(dev);
1382                         } else {
1383                                 self->new_speed = speed;
1384                                 /* Queue will be restarted after speed change
1385                                  * to make sure packets gets through the
1386                                  * proper xmit handler - Jean II */
1387                         }
1388                         dev->trans_start = jiffies;
1389                         spin_unlock_irqrestore(&self->lock, flags);
1390                         dev_kfree_skb(skb);
1391                         return 0;
1392                 } else
1393                         self->new_speed = speed;
1394         }
1395
1396         /* Save current bank */
1397         bank = inb(iobase+BSR);
1398         
1399         self->tx_buff.data = self->tx_buff.head;
1400         
1401         self->tx_buff.len = async_wrap_skb(skb, self->tx_buff.data, 
1402                                            self->tx_buff.truesize);
1403
1404         self->stats.tx_bytes += self->tx_buff.len;
1405         
1406         /* Add interrupt on tx low level (will fire immediately) */
1407         switch_bank(iobase, BANK0);
1408         outb(IER_TXLDL_IE, iobase+IER);
1409         
1410         /* Restore bank register */
1411         outb(bank, iobase+BSR);
1412
1413         dev->trans_start = jiffies;
1414         spin_unlock_irqrestore(&self->lock, flags);
1415
1416         dev_kfree_skb(skb);
1417
1418         return 0;
1419 }
1420
1421 static int nsc_ircc_hard_xmit_fir(struct sk_buff *skb, struct net_device *dev)
1422 {
1423         struct nsc_ircc_cb *self;
1424         unsigned long flags;
1425         int iobase;
1426         __s32 speed;
1427         __u8 bank;
1428         int mtt, diff;
1429         
1430         self = netdev_priv(dev);
1431         iobase = self->io.fir_base;
1432
1433         netif_stop_queue(dev);
1434         
1435         /* Make sure tests *& speed change are atomic */
1436         spin_lock_irqsave(&self->lock, flags);
1437
1438         /* Check if we need to change the speed */
1439         speed = irda_get_next_speed(skb);
1440         if ((speed != self->io.speed) && (speed != -1)) {
1441                 /* Check for empty frame. */
1442                 if (!skb->len) {
1443                         /* If we are currently transmitting, defer to
1444                          * interrupt handler. - Jean II */
1445                         if(self->tx_fifo.len == 0) {
1446                                 nsc_ircc_change_speed(self, speed); 
1447                                 netif_wake_queue(dev);
1448                         } else {
1449                                 self->new_speed = speed;
1450                                 /* Keep queue stopped :
1451                                  * the speed change operation may change the
1452                                  * xmit handler, and we want to make sure
1453                                  * the next packet get through the proper
1454                                  * Tx path, so block the Tx queue until
1455                                  * the speed change has been done.
1456                                  * Jean II */
1457                         }
1458                         dev->trans_start = jiffies;
1459                         spin_unlock_irqrestore(&self->lock, flags);
1460                         dev_kfree_skb(skb);
1461                         return 0;
1462                 } else {
1463                         /* Change speed after current frame */
1464                         self->new_speed = speed;
1465                 }
1466         }
1467
1468         /* Save current bank */
1469         bank = inb(iobase+BSR);
1470
1471         /* Register and copy this frame to DMA memory */
1472         self->tx_fifo.queue[self->tx_fifo.free].start = self->tx_fifo.tail;
1473         self->tx_fifo.queue[self->tx_fifo.free].len = skb->len;
1474         self->tx_fifo.tail += skb->len;
1475
1476         self->stats.tx_bytes += skb->len;
1477
1478         skb_copy_from_linear_data(skb, self->tx_fifo.queue[self->tx_fifo.free].start,
1479                       skb->len);
1480         self->tx_fifo.len++;
1481         self->tx_fifo.free++;
1482
1483         /* Start transmit only if there is currently no transmit going on */
1484         if (self->tx_fifo.len == 1) {
1485                 /* Check if we must wait the min turn time or not */
1486                 mtt = irda_get_mtt(skb);
1487                 if (mtt) {
1488                         /* Check how much time we have used already */
1489                         do_gettimeofday(&self->now);
1490                         diff = self->now.tv_usec - self->stamp.tv_usec;
1491                         if (diff < 0) 
1492                                 diff += 1000000;
1493                         
1494                         /* Check if the mtt is larger than the time we have
1495                          * already used by all the protocol processing
1496                          */
1497                         if (mtt > diff) {
1498                                 mtt -= diff;
1499
1500                                 /* 
1501                                  * Use timer if delay larger than 125 us, and
1502                                  * use udelay for smaller values which should
1503                                  * be acceptable
1504                                  */
1505                                 if (mtt > 125) {
1506                                         /* Adjust for timer resolution */
1507                                         mtt = mtt / 125;
1508                                         
1509                                         /* Setup timer */
1510                                         switch_bank(iobase, BANK4);
1511                                         outb(mtt & 0xff, iobase+TMRL);
1512                                         outb((mtt >> 8) & 0x0f, iobase+TMRH);
1513                                         
1514                                         /* Start timer */
1515                                         outb(IRCR1_TMR_EN, iobase+IRCR1);
1516                                         self->io.direction = IO_XMIT;
1517                                         
1518                                         /* Enable timer interrupt */
1519                                         switch_bank(iobase, BANK0);
1520                                         outb(IER_TMR_IE, iobase+IER);
1521                                         
1522                                         /* Timer will take care of the rest */
1523                                         goto out; 
1524                                 } else
1525                                         udelay(mtt);
1526                         }
1527                 }               
1528                 /* Enable DMA interrupt */
1529                 switch_bank(iobase, BANK0);
1530                 outb(IER_DMA_IE, iobase+IER);
1531
1532                 /* Transmit frame */
1533                 nsc_ircc_dma_xmit(self, iobase);
1534         }
1535  out:
1536         /* Not busy transmitting anymore if window is not full,
1537          * and if we don't need to change speed */
1538         if ((self->tx_fifo.free < MAX_TX_WINDOW) && (self->new_speed == 0))
1539                 netif_wake_queue(self->netdev);
1540
1541         /* Restore bank register */
1542         outb(bank, iobase+BSR);
1543
1544         dev->trans_start = jiffies;
1545         spin_unlock_irqrestore(&self->lock, flags);
1546         dev_kfree_skb(skb);
1547
1548         return 0;
1549 }
1550
1551 /*
1552  * Function nsc_ircc_dma_xmit (self, iobase)
1553  *
1554  *    Transmit data using DMA
1555  *
1556  */
1557 static void nsc_ircc_dma_xmit(struct nsc_ircc_cb *self, int iobase)
1558 {
1559         int bsr;
1560
1561         /* Save current bank */
1562         bsr = inb(iobase+BSR);
1563
1564         /* Disable DMA */
1565         switch_bank(iobase, BANK0);
1566         outb(inb(iobase+MCR) & ~MCR_DMA_EN, iobase+MCR);
1567         
1568         self->io.direction = IO_XMIT;
1569         
1570         /* Choose transmit DMA channel  */ 
1571         switch_bank(iobase, BANK2);
1572         outb(ECR1_DMASWP|ECR1_DMANF|ECR1_EXT_SL, iobase+ECR1);
1573         
1574         irda_setup_dma(self->io.dma, 
1575                        ((u8 *)self->tx_fifo.queue[self->tx_fifo.ptr].start -
1576                         self->tx_buff.head) + self->tx_buff_dma,
1577                        self->tx_fifo.queue[self->tx_fifo.ptr].len, 
1578                        DMA_TX_MODE);
1579
1580         /* Enable DMA and SIR interaction pulse */
1581         switch_bank(iobase, BANK0);     
1582         outb(inb(iobase+MCR)|MCR_TX_DFR|MCR_DMA_EN|MCR_IR_PLS, iobase+MCR);
1583
1584         /* Restore bank register */
1585         outb(bsr, iobase+BSR);
1586 }
1587
1588 /*
1589  * Function nsc_ircc_pio_xmit (self, iobase)
1590  *
1591  *    Transmit data using PIO. Returns the number of bytes that actually
1592  *    got transferred
1593  *
1594  */
1595 static int nsc_ircc_pio_write(int iobase, __u8 *buf, int len, int fifo_size)
1596 {
1597         int actual = 0;
1598         __u8 bank;
1599         
1600         IRDA_DEBUG(4, "%s()\n", __func__);
1601
1602         /* Save current bank */
1603         bank = inb(iobase+BSR);
1604
1605         switch_bank(iobase, BANK0);
1606         if (!(inb_p(iobase+LSR) & LSR_TXEMP)) {
1607                 IRDA_DEBUG(4, "%s(), warning, FIFO not empty yet!\n",
1608                            __func__);
1609
1610                 /* FIFO may still be filled to the Tx interrupt threshold */
1611                 fifo_size -= 17;
1612         }
1613
1614         /* Fill FIFO with current frame */
1615         while ((fifo_size-- > 0) && (actual < len)) {
1616                 /* Transmit next byte */
1617                 outb(buf[actual++], iobase+TXD);
1618         }
1619         
1620         IRDA_DEBUG(4, "%s(), fifo_size %d ; %d sent of %d\n", 
1621                    __func__, fifo_size, actual, len);
1622         
1623         /* Restore bank */
1624         outb(bank, iobase+BSR);
1625
1626         return actual;
1627 }
1628
1629 /*
1630  * Function nsc_ircc_dma_xmit_complete (self)
1631  *
1632  *    The transfer of a frame in finished. This function will only be called 
1633  *    by the interrupt handler
1634  *
1635  */
1636 static int nsc_ircc_dma_xmit_complete(struct nsc_ircc_cb *self)
1637 {
1638         int iobase;
1639         __u8 bank;
1640         int ret = TRUE;
1641
1642         IRDA_DEBUG(2, "%s()\n", __func__);
1643
1644         iobase = self->io.fir_base;
1645
1646         /* Save current bank */
1647         bank = inb(iobase+BSR);
1648
1649         /* Disable DMA */
1650         switch_bank(iobase, BANK0);
1651         outb(inb(iobase+MCR) & ~MCR_DMA_EN, iobase+MCR);
1652         
1653         /* Check for underrrun! */
1654         if (inb(iobase+ASCR) & ASCR_TXUR) {
1655                 self->stats.tx_errors++;
1656                 self->stats.tx_fifo_errors++;
1657                 
1658                 /* Clear bit, by writing 1 into it */
1659                 outb(ASCR_TXUR, iobase+ASCR);
1660         } else {
1661                 self->stats.tx_packets++;
1662         }
1663
1664         /* Finished with this frame, so prepare for next */
1665         self->tx_fifo.ptr++;
1666         self->tx_fifo.len--;
1667
1668         /* Any frames to be sent back-to-back? */
1669         if (self->tx_fifo.len) {
1670                 nsc_ircc_dma_xmit(self, iobase);
1671                 
1672                 /* Not finished yet! */
1673                 ret = FALSE;
1674         } else {
1675                 /* Reset Tx FIFO info */
1676                 self->tx_fifo.len = self->tx_fifo.ptr = self->tx_fifo.free = 0;
1677                 self->tx_fifo.tail = self->tx_buff.head;
1678         }
1679
1680         /* Make sure we have room for more frames and
1681          * that we don't need to change speed */
1682         if ((self->tx_fifo.free < MAX_TX_WINDOW) && (self->new_speed == 0)) {
1683                 /* Not busy transmitting anymore */
1684                 /* Tell the network layer, that we can accept more frames */
1685                 netif_wake_queue(self->netdev);
1686         }
1687
1688         /* Restore bank */
1689         outb(bank, iobase+BSR);
1690         
1691         return ret;
1692 }
1693
1694 /*
1695  * Function nsc_ircc_dma_receive (self)
1696  *
1697  *    Get ready for receiving a frame. The device will initiate a DMA
1698  *    if it starts to receive a frame.
1699  *
1700  */
1701 static int nsc_ircc_dma_receive(struct nsc_ircc_cb *self) 
1702 {
1703         int iobase;
1704         __u8 bsr;
1705
1706         iobase = self->io.fir_base;
1707
1708         /* Reset Tx FIFO info */
1709         self->tx_fifo.len = self->tx_fifo.ptr = self->tx_fifo.free = 0;
1710         self->tx_fifo.tail = self->tx_buff.head;
1711
1712         /* Save current bank */
1713         bsr = inb(iobase+BSR);
1714
1715         /* Disable DMA */
1716         switch_bank(iobase, BANK0);
1717         outb(inb(iobase+MCR) & ~MCR_DMA_EN, iobase+MCR);
1718
1719         /* Choose DMA Rx, DMA Fairness, and Advanced mode */
1720         switch_bank(iobase, BANK2);
1721         outb(ECR1_DMANF|ECR1_EXT_SL, iobase+ECR1);
1722
1723         self->io.direction = IO_RECV;
1724         self->rx_buff.data = self->rx_buff.head;
1725         
1726         /* Reset Rx FIFO. This will also flush the ST_FIFO */
1727         switch_bank(iobase, BANK0);
1728         outb(FCR_RXSR|FCR_FIFO_EN, iobase+FCR);
1729
1730         self->st_fifo.len = self->st_fifo.pending_bytes = 0;
1731         self->st_fifo.tail = self->st_fifo.head = 0;
1732         
1733         irda_setup_dma(self->io.dma, self->rx_buff_dma, self->rx_buff.truesize,
1734                        DMA_RX_MODE);
1735
1736         /* Enable DMA */
1737         switch_bank(iobase, BANK0);
1738         outb(inb(iobase+MCR)|MCR_DMA_EN, iobase+MCR);
1739
1740         /* Restore bank register */
1741         outb(bsr, iobase+BSR);
1742         
1743         return 0;
1744 }
1745
1746 /*
1747  * Function nsc_ircc_dma_receive_complete (self)
1748  *
1749  *    Finished with receiving frames
1750  *
1751  *    
1752  */
1753 static int nsc_ircc_dma_receive_complete(struct nsc_ircc_cb *self, int iobase)
1754 {
1755         struct st_fifo *st_fifo;
1756         struct sk_buff *skb;
1757         __u8 status;
1758         __u8 bank;
1759         int len;
1760
1761         st_fifo = &self->st_fifo;
1762
1763         /* Save current bank */
1764         bank = inb(iobase+BSR);
1765         
1766         /* Read all entries in status FIFO */
1767         switch_bank(iobase, BANK5);
1768         while ((status = inb(iobase+FRM_ST)) & FRM_ST_VLD) {
1769                 /* We must empty the status FIFO no matter what */
1770                 len = inb(iobase+RFLFL) | ((inb(iobase+RFLFH) & 0x1f) << 8);
1771
1772                 if (st_fifo->tail >= MAX_RX_WINDOW) {
1773                         IRDA_DEBUG(0, "%s(), window is full!\n", __func__);
1774                         continue;
1775                 }
1776                         
1777                 st_fifo->entries[st_fifo->tail].status = status;
1778                 st_fifo->entries[st_fifo->tail].len = len;
1779                 st_fifo->pending_bytes += len;
1780                 st_fifo->tail++;
1781                 st_fifo->len++;
1782         }
1783         /* Try to process all entries in status FIFO */
1784         while (st_fifo->len > 0) {
1785                 /* Get first entry */
1786                 status = st_fifo->entries[st_fifo->head].status;
1787                 len    = st_fifo->entries[st_fifo->head].len;
1788                 st_fifo->pending_bytes -= len;
1789                 st_fifo->head++;
1790                 st_fifo->len--;
1791
1792                 /* Check for errors */
1793                 if (status & FRM_ST_ERR_MSK) {
1794                         if (status & FRM_ST_LOST_FR) {
1795                                 /* Add number of lost frames to stats */
1796                                 self->stats.rx_errors += len;   
1797                         } else {
1798                                 /* Skip frame */
1799                                 self->stats.rx_errors++;
1800                                 
1801                                 self->rx_buff.data += len;
1802                         
1803                                 if (status & FRM_ST_MAX_LEN)
1804                                         self->stats.rx_length_errors++;
1805                                 
1806                                 if (status & FRM_ST_PHY_ERR) 
1807                                         self->stats.rx_frame_errors++;
1808                                 
1809                                 if (status & FRM_ST_BAD_CRC) 
1810                                         self->stats.rx_crc_errors++;
1811                         }
1812                         /* The errors below can be reported in both cases */
1813                         if (status & FRM_ST_OVR1)
1814                                 self->stats.rx_fifo_errors++;                  
1815                         
1816                         if (status & FRM_ST_OVR2)
1817                                 self->stats.rx_fifo_errors++;
1818                 } else {
1819                         /*  
1820                          * First we must make sure that the frame we
1821                          * want to deliver is all in main memory. If we
1822                          * cannot tell, then we check if the Rx FIFO is
1823                          * empty. If not then we will have to take a nap
1824                          * and try again later.  
1825                          */
1826                         if (st_fifo->pending_bytes < self->io.fifo_size) {
1827                                 switch_bank(iobase, BANK0);
1828                                 if (inb(iobase+LSR) & LSR_RXDA) {
1829                                         /* Put this entry back in fifo */
1830                                         st_fifo->head--;
1831                                         st_fifo->len++;
1832                                         st_fifo->pending_bytes += len;
1833                                         st_fifo->entries[st_fifo->head].status = status;
1834                                         st_fifo->entries[st_fifo->head].len = len;
1835                                         /*  
1836                                          * DMA not finished yet, so try again 
1837                                          * later, set timer value, resolution 
1838                                          * 125 us 
1839                                          */
1840                                         switch_bank(iobase, BANK4);
1841                                         outb(0x02, iobase+TMRL); /* x 125 us */
1842                                         outb(0x00, iobase+TMRH);
1843
1844                                         /* Start timer */
1845                                         outb(IRCR1_TMR_EN, iobase+IRCR1);
1846
1847                                         /* Restore bank register */
1848                                         outb(bank, iobase+BSR);
1849                                         
1850                                         return FALSE; /* I'll be back! */
1851                                 }
1852                         }
1853
1854                         /* 
1855                          * Remember the time we received this frame, so we can
1856                          * reduce the min turn time a bit since we will know
1857                          * how much time we have used for protocol processing
1858                          */
1859                         do_gettimeofday(&self->stamp);
1860
1861                         skb = dev_alloc_skb(len+1);
1862                         if (skb == NULL)  {
1863                                 IRDA_WARNING("%s(), memory squeeze, "
1864                                              "dropping frame.\n",
1865                                              __func__);
1866                                 self->stats.rx_dropped++;
1867
1868                                 /* Restore bank register */
1869                                 outb(bank, iobase+BSR);
1870
1871                                 return FALSE;
1872                         }
1873                         
1874                         /* Make sure IP header gets aligned */
1875                         skb_reserve(skb, 1); 
1876
1877                         /* Copy frame without CRC */
1878                         if (self->io.speed < 4000000) {
1879                                 skb_put(skb, len-2);
1880                                 skb_copy_to_linear_data(skb,
1881                                                         self->rx_buff.data,
1882                                                         len - 2);
1883                         } else {
1884                                 skb_put(skb, len-4);
1885                                 skb_copy_to_linear_data(skb,
1886                                                         self->rx_buff.data,
1887                                                         len - 4);
1888                         }
1889
1890                         /* Move to next frame */
1891                         self->rx_buff.data += len;
1892                         self->stats.rx_bytes += len;
1893                         self->stats.rx_packets++;
1894
1895                         skb->dev = self->netdev;
1896                         skb_reset_mac_header(skb);
1897                         skb->protocol = htons(ETH_P_IRDA);
1898                         netif_rx(skb);
1899                 }
1900         }
1901         /* Restore bank register */
1902         outb(bank, iobase+BSR);
1903
1904         return TRUE;
1905 }
1906
1907 /*
1908  * Function nsc_ircc_pio_receive (self)
1909  *
1910  *    Receive all data in receiver FIFO
1911  *
1912  */
1913 static void nsc_ircc_pio_receive(struct nsc_ircc_cb *self) 
1914 {
1915         __u8 byte;
1916         int iobase;
1917
1918         iobase = self->io.fir_base;
1919         
1920         /*  Receive all characters in Rx FIFO */
1921         do {
1922                 byte = inb(iobase+RXD);
1923                 async_unwrap_char(self->netdev, &self->stats, &self->rx_buff, 
1924                                   byte);
1925         } while (inb(iobase+LSR) & LSR_RXDA); /* Data available */      
1926 }
1927
1928 /*
1929  * Function nsc_ircc_sir_interrupt (self, eir)
1930  *
1931  *    Handle SIR interrupt
1932  *
1933  */
1934 static void nsc_ircc_sir_interrupt(struct nsc_ircc_cb *self, int eir)
1935 {
1936         int actual;
1937
1938         /* Check if transmit FIFO is low on data */
1939         if (eir & EIR_TXLDL_EV) {
1940                 /* Write data left in transmit buffer */
1941                 actual = nsc_ircc_pio_write(self->io.fir_base, 
1942                                            self->tx_buff.data, 
1943                                            self->tx_buff.len, 
1944                                            self->io.fifo_size);
1945                 self->tx_buff.data += actual;
1946                 self->tx_buff.len  -= actual;
1947                 
1948                 self->io.direction = IO_XMIT;
1949
1950                 /* Check if finished */
1951                 if (self->tx_buff.len > 0)
1952                         self->ier = IER_TXLDL_IE;
1953                 else { 
1954
1955                         self->stats.tx_packets++;
1956                         netif_wake_queue(self->netdev);
1957                         self->ier = IER_TXEMP_IE;
1958                 }
1959                         
1960         }
1961         /* Check if transmission has completed */
1962         if (eir & EIR_TXEMP_EV) {
1963                 /* Turn around and get ready to receive some data */
1964                 self->io.direction = IO_RECV;
1965                 self->ier = IER_RXHDL_IE;
1966                 /* Check if we need to change the speed?
1967                  * Need to be after self->io.direction to avoid race with
1968                  * nsc_ircc_hard_xmit_sir() - Jean II */
1969                 if (self->new_speed) {
1970                         IRDA_DEBUG(2, "%s(), Changing speed!\n", __func__);
1971                         self->ier = nsc_ircc_change_speed(self,
1972                                                           self->new_speed);
1973                         self->new_speed = 0;
1974                         netif_wake_queue(self->netdev);
1975
1976                         /* Check if we are going to FIR */
1977                         if (self->io.speed > 115200) {
1978                                 /* No need to do anymore SIR stuff */
1979                                 return;
1980                         }
1981                 }
1982         }
1983
1984         /* Rx FIFO threshold or timeout */
1985         if (eir & EIR_RXHDL_EV) {
1986                 nsc_ircc_pio_receive(self);
1987
1988                 /* Keep receiving */
1989                 self->ier = IER_RXHDL_IE;
1990         }
1991 }
1992
1993 /*
1994  * Function nsc_ircc_fir_interrupt (self, eir)
1995  *
1996  *    Handle MIR/FIR interrupt
1997  *
1998  */
1999 static void nsc_ircc_fir_interrupt(struct nsc_ircc_cb *self, int iobase, 
2000                                    int eir)
2001 {
2002         __u8 bank;
2003
2004         bank = inb(iobase+BSR);
2005         
2006         /* Status FIFO event*/
2007         if (eir & EIR_SFIF_EV) {
2008                 /* Check if DMA has finished */
2009                 if (nsc_ircc_dma_receive_complete(self, iobase)) {
2010                         /* Wait for next status FIFO interrupt */
2011                         self->ier = IER_SFIF_IE;
2012                 } else {
2013                         self->ier = IER_SFIF_IE | IER_TMR_IE;
2014                 }
2015         } else if (eir & EIR_TMR_EV) { /* Timer finished */
2016                 /* Disable timer */
2017                 switch_bank(iobase, BANK4);
2018                 outb(0, iobase+IRCR1);
2019
2020                 /* Clear timer event */
2021                 switch_bank(iobase, BANK0);
2022                 outb(ASCR_CTE, iobase+ASCR);
2023
2024                 /* Check if this is a Tx timer interrupt */
2025                 if (self->io.direction == IO_XMIT) {
2026                         nsc_ircc_dma_xmit(self, iobase);
2027
2028                         /* Interrupt on DMA */
2029                         self->ier = IER_DMA_IE;
2030                 } else {
2031                         /* Check (again) if DMA has finished */
2032                         if (nsc_ircc_dma_receive_complete(self, iobase)) {
2033                                 self->ier = IER_SFIF_IE;
2034                         } else {
2035                                 self->ier = IER_SFIF_IE | IER_TMR_IE;
2036                         }
2037                 }
2038         } else if (eir & EIR_DMA_EV) {
2039                 /* Finished with all transmissions? */
2040                 if (nsc_ircc_dma_xmit_complete(self)) {
2041                         if(self->new_speed != 0) {
2042                                 /* As we stop the Tx queue, the speed change
2043                                  * need to be done when the Tx fifo is
2044                                  * empty. Ask for a Tx done interrupt */
2045                                 self->ier = IER_TXEMP_IE;
2046                         } else {
2047                                 /* Check if there are more frames to be
2048                                  * transmitted */
2049                                 if (irda_device_txqueue_empty(self->netdev)) {
2050                                         /* Prepare for receive */
2051                                         nsc_ircc_dma_receive(self);
2052                                         self->ier = IER_SFIF_IE;
2053                                 } else
2054                                         IRDA_WARNING("%s(), potential "
2055                                                      "Tx queue lockup !\n",
2056                                                      __func__);
2057                         }
2058                 } else {
2059                         /*  Not finished yet, so interrupt on DMA again */
2060                         self->ier = IER_DMA_IE;
2061                 }
2062         } else if (eir & EIR_TXEMP_EV) {
2063                 /* The Tx FIFO has totally drained out, so now we can change
2064                  * the speed... - Jean II */
2065                 self->ier = nsc_ircc_change_speed(self, self->new_speed);
2066                 self->new_speed = 0;
2067                 netif_wake_queue(self->netdev);
2068                 /* Note : nsc_ircc_change_speed() restarted Rx fifo */
2069         }
2070
2071         outb(bank, iobase+BSR);
2072 }
2073
2074 /*
2075  * Function nsc_ircc_interrupt (irq, dev_id, regs)
2076  *
2077  *    An interrupt from the chip has arrived. Time to do some work
2078  *
2079  */
2080 static irqreturn_t nsc_ircc_interrupt(int irq, void *dev_id)
2081 {
2082         struct net_device *dev = dev_id;
2083         struct nsc_ircc_cb *self;
2084         __u8 bsr, eir;
2085         int iobase;
2086
2087         self = netdev_priv(dev);
2088
2089         spin_lock(&self->lock); 
2090
2091         iobase = self->io.fir_base;
2092
2093         bsr = inb(iobase+BSR);  /* Save current bank */
2094
2095         switch_bank(iobase, BANK0);     
2096         self->ier = inb(iobase+IER); 
2097         eir = inb(iobase+EIR) & self->ier; /* Mask out the interesting ones */ 
2098
2099         outb(0, iobase+IER); /* Disable interrupts */
2100         
2101         if (eir) {
2102                 /* Dispatch interrupt handler for the current speed */
2103                 if (self->io.speed > 115200)
2104                         nsc_ircc_fir_interrupt(self, iobase, eir);
2105                 else
2106                         nsc_ircc_sir_interrupt(self, eir);
2107         }
2108         
2109         outb(self->ier, iobase+IER); /* Restore interrupts */
2110         outb(bsr, iobase+BSR);       /* Restore bank register */
2111
2112         spin_unlock(&self->lock);
2113         return IRQ_RETVAL(eir);
2114 }
2115
2116 /*
2117  * Function nsc_ircc_is_receiving (self)
2118  *
2119  *    Return TRUE is we are currently receiving a frame
2120  *
2121  */
2122 static int nsc_ircc_is_receiving(struct nsc_ircc_cb *self)
2123 {
2124         unsigned long flags;
2125         int status = FALSE;
2126         int iobase;
2127         __u8 bank;
2128
2129         IRDA_ASSERT(self != NULL, return FALSE;);
2130
2131         spin_lock_irqsave(&self->lock, flags);
2132
2133         if (self->io.speed > 115200) {
2134                 iobase = self->io.fir_base;
2135
2136                 /* Check if rx FIFO is not empty */
2137                 bank = inb(iobase+BSR);
2138                 switch_bank(iobase, BANK2);
2139                 if ((inb(iobase+RXFLV) & 0x3f) != 0) {
2140                         /* We are receiving something */
2141                         status =  TRUE;
2142                 }
2143                 outb(bank, iobase+BSR);
2144         } else 
2145                 status = (self->rx_buff.state != OUTSIDE_FRAME);
2146         
2147         spin_unlock_irqrestore(&self->lock, flags);
2148
2149         return status;
2150 }
2151
2152 /*
2153  * Function nsc_ircc_net_open (dev)
2154  *
2155  *    Start the device
2156  *
2157  */
2158 static int nsc_ircc_net_open(struct net_device *dev)
2159 {
2160         struct nsc_ircc_cb *self;
2161         int iobase;
2162         char hwname[32];
2163         __u8 bank;
2164         
2165         IRDA_DEBUG(4, "%s()\n", __func__);
2166         
2167         IRDA_ASSERT(dev != NULL, return -1;);
2168         self = netdev_priv(dev);
2169         
2170         IRDA_ASSERT(self != NULL, return 0;);
2171         
2172         iobase = self->io.fir_base;
2173         
2174         if (request_irq(self->io.irq, nsc_ircc_interrupt, 0, dev->name, dev)) {
2175                 IRDA_WARNING("%s, unable to allocate irq=%d\n",
2176                              driver_name, self->io.irq);
2177                 return -EAGAIN;
2178         }
2179         /*
2180          * Always allocate the DMA channel after the IRQ, and clean up on 
2181          * failure.
2182          */
2183         if (request_dma(self->io.dma, dev->name)) {
2184                 IRDA_WARNING("%s, unable to allocate dma=%d\n",
2185                              driver_name, self->io.dma);
2186                 free_irq(self->io.irq, dev);
2187                 return -EAGAIN;
2188         }
2189         
2190         /* Save current bank */
2191         bank = inb(iobase+BSR);
2192         
2193         /* turn on interrupts */
2194         switch_bank(iobase, BANK0);
2195         outb(IER_LS_IE | IER_RXHDL_IE, iobase+IER);
2196
2197         /* Restore bank register */
2198         outb(bank, iobase+BSR);
2199
2200         /* Ready to play! */
2201         netif_start_queue(dev);
2202         
2203         /* Give self a hardware name */
2204         sprintf(hwname, "NSC-FIR @ 0x%03x", self->io.fir_base);
2205
2206         /* 
2207          * Open new IrLAP layer instance, now that everything should be
2208          * initialized properly 
2209          */
2210         self->irlap = irlap_open(dev, &self->qos, hwname);
2211
2212         return 0;
2213 }
2214
2215 /*
2216  * Function nsc_ircc_net_close (dev)
2217  *
2218  *    Stop the device
2219  *
2220  */
2221 static int nsc_ircc_net_close(struct net_device *dev)
2222 {
2223         struct nsc_ircc_cb *self;
2224         int iobase;
2225         __u8 bank;
2226
2227         IRDA_DEBUG(4, "%s()\n", __func__);
2228         
2229         IRDA_ASSERT(dev != NULL, return -1;);
2230
2231         self = netdev_priv(dev);
2232         IRDA_ASSERT(self != NULL, return 0;);
2233
2234         /* Stop device */
2235         netif_stop_queue(dev);
2236         
2237         /* Stop and remove instance of IrLAP */
2238         if (self->irlap)
2239                 irlap_close(self->irlap);
2240         self->irlap = NULL;
2241         
2242         iobase = self->io.fir_base;
2243
2244         disable_dma(self->io.dma);
2245
2246         /* Save current bank */
2247         bank = inb(iobase+BSR);
2248
2249         /* Disable interrupts */
2250         switch_bank(iobase, BANK0);
2251         outb(0, iobase+IER); 
2252        
2253         free_irq(self->io.irq, dev);
2254         free_dma(self->io.dma);
2255
2256         /* Restore bank register */
2257         outb(bank, iobase+BSR);
2258
2259         return 0;
2260 }
2261
2262 /*
2263  * Function nsc_ircc_net_ioctl (dev, rq, cmd)
2264  *
2265  *    Process IOCTL commands for this device
2266  *
2267  */
2268 static int nsc_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
2269 {
2270         struct if_irda_req *irq = (struct if_irda_req *) rq;
2271         struct nsc_ircc_cb *self;
2272         unsigned long flags;
2273         int ret = 0;
2274
2275         IRDA_ASSERT(dev != NULL, return -1;);
2276
2277         self = netdev_priv(dev);
2278
2279         IRDA_ASSERT(self != NULL, return -1;);
2280
2281         IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __func__, dev->name, cmd);
2282         
2283         switch (cmd) {
2284         case SIOCSBANDWIDTH: /* Set bandwidth */
2285                 if (!capable(CAP_NET_ADMIN)) {
2286                         ret = -EPERM;
2287                         break;
2288                 }
2289                 spin_lock_irqsave(&self->lock, flags);
2290                 nsc_ircc_change_speed(self, irq->ifr_baudrate);
2291                 spin_unlock_irqrestore(&self->lock, flags);
2292                 break;
2293         case SIOCSMEDIABUSY: /* Set media busy */
2294                 if (!capable(CAP_NET_ADMIN)) {
2295                         ret = -EPERM;
2296                         break;
2297                 }
2298                 irda_device_set_media_busy(self->netdev, TRUE);
2299                 break;
2300         case SIOCGRECEIVING: /* Check if we are receiving right now */
2301                 /* This is already protected */
2302                 irq->ifr_receiving = nsc_ircc_is_receiving(self);
2303                 break;
2304         default:
2305                 ret = -EOPNOTSUPP;
2306         }
2307         return ret;
2308 }
2309
2310 static struct net_device_stats *nsc_ircc_net_get_stats(struct net_device *dev)
2311 {
2312         struct nsc_ircc_cb *self = netdev_priv(dev);
2313         
2314         return &self->stats;
2315 }
2316
2317 static int nsc_ircc_suspend(struct platform_device *dev, pm_message_t state)
2318 {
2319         struct nsc_ircc_cb *self = platform_get_drvdata(dev);
2320         int bank;
2321         unsigned long flags;
2322         int iobase = self->io.fir_base;
2323
2324         if (self->io.suspended)
2325                 return 0;
2326
2327         IRDA_DEBUG(1, "%s, Suspending\n", driver_name);
2328
2329         rtnl_lock();
2330         if (netif_running(self->netdev)) {
2331                 netif_device_detach(self->netdev);
2332                 spin_lock_irqsave(&self->lock, flags);
2333                 /* Save current bank */
2334                 bank = inb(iobase+BSR);
2335
2336                 /* Disable interrupts */
2337                 switch_bank(iobase, BANK0);
2338                 outb(0, iobase+IER);
2339
2340                 /* Restore bank register */
2341                 outb(bank, iobase+BSR);
2342
2343                 spin_unlock_irqrestore(&self->lock, flags);
2344                 free_irq(self->io.irq, self->netdev);
2345                 disable_dma(self->io.dma);
2346         }
2347         self->io.suspended = 1;
2348         rtnl_unlock();
2349
2350         return 0;
2351 }
2352
2353 static int nsc_ircc_resume(struct platform_device *dev)
2354 {
2355         struct nsc_ircc_cb *self = platform_get_drvdata(dev);
2356         unsigned long flags;
2357
2358         if (!self->io.suspended)
2359                 return 0;
2360
2361         IRDA_DEBUG(1, "%s, Waking up\n", driver_name);
2362
2363         rtnl_lock();
2364         nsc_ircc_setup(&self->io);
2365         nsc_ircc_init_dongle_interface(self->io.fir_base, self->io.dongle_id);
2366
2367         if (netif_running(self->netdev)) {
2368                 if (request_irq(self->io.irq, nsc_ircc_interrupt, 0,
2369                                 self->netdev->name, self->netdev)) {
2370                         IRDA_WARNING("%s, unable to allocate irq=%d\n",
2371                                      driver_name, self->io.irq);
2372
2373                         /*
2374                          * Don't fail resume process, just kill this
2375                          * network interface
2376                          */
2377                         unregister_netdevice(self->netdev);
2378                 } else {
2379                         spin_lock_irqsave(&self->lock, flags);
2380                         nsc_ircc_change_speed(self, self->io.speed);
2381                         spin_unlock_irqrestore(&self->lock, flags);
2382                         netif_device_attach(self->netdev);
2383                 }
2384
2385         } else {
2386                 spin_lock_irqsave(&self->lock, flags);
2387                 nsc_ircc_change_speed(self, 9600);
2388                 spin_unlock_irqrestore(&self->lock, flags);
2389         }
2390         self->io.suspended = 0;
2391         rtnl_unlock();
2392
2393         return 0;
2394 }
2395
2396 MODULE_AUTHOR("Dag Brattli <dagb@cs.uit.no>");
2397 MODULE_DESCRIPTION("NSC IrDA Device Driver");
2398 MODULE_LICENSE("GPL");
2399
2400
2401 module_param(qos_mtt_bits, int, 0);
2402 MODULE_PARM_DESC(qos_mtt_bits, "Minimum Turn Time");
2403 module_param_array(io, int, NULL, 0);
2404 MODULE_PARM_DESC(io, "Base I/O addresses");
2405 module_param_array(irq, int, NULL, 0);
2406 MODULE_PARM_DESC(irq, "IRQ lines");
2407 module_param_array(dma, int, NULL, 0);
2408 MODULE_PARM_DESC(dma, "DMA channels");
2409 module_param(dongle_id, int, 0);
2410 MODULE_PARM_DESC(dongle_id, "Type-id of used dongle");
2411
2412 module_init(nsc_ircc_init);
2413 module_exit(nsc_ircc_cleanup);
2414