e8cb87d906fcfa12b86a14cdc6b1d860c28cffbf
[linux-2.6.git] / drivers / net / hamradio / baycom_epp.c
1 /*****************************************************************************/
2
3 /*
4  *      baycom_epp.c  -- baycom epp radio modem driver.
5  *
6  *      Copyright (C) 1998-2000
7  *          Thomas Sailer (sailer@ife.ee.ethz.ch)
8  *
9  *      This program is free software; you can redistribute it and/or modify
10  *      it under the terms of the GNU General Public License as published by
11  *      the Free Software Foundation; either version 2 of the License, or
12  *      (at your option) any later version.
13  *
14  *      This program is distributed in the hope that it will be useful,
15  *      but WITHOUT ANY WARRANTY; without even the implied warranty of
16  *      MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17  *      GNU General Public License for more details.
18  *
19  *      You should have received a copy of the GNU General Public License
20  *      along with this program; if not, write to the Free Software
21  *      Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
22  *
23  *  Please note that the GPL allows you to use the driver, NOT the radio.
24  *  In order to use the radio, you need a license from the communications
25  *  authority of your country.
26  *
27  *
28  *  History:
29  *   0.1  xx.xx.1998  Initial version by Matthias Welwarsky (dg2fef)
30  *   0.2  21.04.1998  Massive rework by Thomas Sailer
31  *                    Integrated FPGA EPP modem configuration routines
32  *   0.3  11.05.1998  Took FPGA config out and moved it into a separate program
33  *   0.4  26.07.1999  Adapted to new lowlevel parport driver interface
34  *   0.5  03.08.1999  adapt to Linus' new __setup/__initcall
35  *                    removed some pre-2.2 kernel compatibility cruft
36  *   0.6  10.08.1999  Check if parport can do SPP and is safe to access during interrupt contexts
37  *   0.7  12.02.2000  adapted to softnet driver interface
38  *
39  */
40
41 /*****************************************************************************/
42
43 #include <linux/config.h>
44 #include <linux/module.h>
45 #include <linux/kernel.h>
46 #include <linux/init.h>
47 #include <linux/string.h>
48 #include <linux/workqueue.h>
49 #include <linux/fs.h>
50 #include <linux/parport.h>
51 #include <linux/smp_lock.h>
52 #include <asm/uaccess.h>
53 #include <linux/if_arp.h>
54 #include <linux/kmod.h>
55 #include <linux/hdlcdrv.h>
56 #include <linux/baycom.h>
57 #if defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE)
58 /* prototypes for ax25_encapsulate and ax25_rebuild_header */
59 #include <net/ax25.h> 
60 #endif /* CONFIG_AX25 || CONFIG_AX25_MODULE */
61 #include <linux/crc-ccitt.h>
62
63 /* --------------------------------------------------------------------- */
64
65 #define BAYCOM_DEBUG
66 #define BAYCOM_MAGIC 19730510
67
68 /* --------------------------------------------------------------------- */
69
70 static const char paranoia_str[] = KERN_ERR 
71         "baycom_epp: bad magic number for hdlcdrv_state struct in routine %s\n";
72
73 static const char bc_drvname[] = "baycom_epp";
74 static const char bc_drvinfo[] = KERN_INFO "baycom_epp: (C) 1998-2000 Thomas Sailer, HB9JNX/AE4WA\n"
75 KERN_INFO "baycom_epp: version 0.7 compiled " __TIME__ " " __DATE__ "\n";
76
77 /* --------------------------------------------------------------------- */
78
79 #define NR_PORTS 4
80
81 static struct net_device *baycom_device[NR_PORTS];
82
83 /* --------------------------------------------------------------------- */
84
85 /* EPP status register */
86 #define EPP_DCDBIT      0x80
87 #define EPP_PTTBIT      0x08
88 #define EPP_NREF        0x01
89 #define EPP_NRAEF       0x02
90 #define EPP_NRHF        0x04
91 #define EPP_NTHF        0x20
92 #define EPP_NTAEF       0x10
93 #define EPP_NTEF        EPP_PTTBIT
94
95 /* EPP control register */
96 #define EPP_TX_FIFO_ENABLE 0x10
97 #define EPP_RX_FIFO_ENABLE 0x08
98 #define EPP_MODEM_ENABLE   0x20
99 #define EPP_LEDS           0xC0
100 #define EPP_IRQ_ENABLE     0x10
101
102 /* LPT registers */
103 #define LPTREG_ECONTROL       0x402
104 #define LPTREG_CONFIGB        0x401
105 #define LPTREG_CONFIGA        0x400
106 #define LPTREG_EPPDATA        0x004
107 #define LPTREG_EPPADDR        0x003
108 #define LPTREG_CONTROL        0x002
109 #define LPTREG_STATUS         0x001
110 #define LPTREG_DATA           0x000
111
112 /* LPT control register */
113 #define LPTCTRL_PROGRAM       0x04   /* 0 to reprogram */
114 #define LPTCTRL_WRITE         0x01
115 #define LPTCTRL_ADDRSTB       0x08
116 #define LPTCTRL_DATASTB       0x02
117 #define LPTCTRL_INTEN         0x10
118
119 /* LPT status register */
120 #define LPTSTAT_SHIFT_NINTR   6
121 #define LPTSTAT_WAIT          0x80
122 #define LPTSTAT_NINTR         (1<<LPTSTAT_SHIFT_NINTR)
123 #define LPTSTAT_PE            0x20
124 #define LPTSTAT_DONE          0x10
125 #define LPTSTAT_NERROR        0x08
126 #define LPTSTAT_EPPTIMEOUT    0x01
127
128 /* LPT data register */
129 #define LPTDATA_SHIFT_TDI     0
130 #define LPTDATA_SHIFT_TMS     2
131 #define LPTDATA_TDI           (1<<LPTDATA_SHIFT_TDI)
132 #define LPTDATA_TCK           0x02
133 #define LPTDATA_TMS           (1<<LPTDATA_SHIFT_TMS)
134 #define LPTDATA_INITBIAS      0x80
135
136
137 /* EPP modem config/status bits */
138 #define EPP_DCDBIT            0x80
139 #define EPP_PTTBIT            0x08
140 #define EPP_RXEBIT            0x01
141 #define EPP_RXAEBIT           0x02
142 #define EPP_RXHFULL           0x04
143
144 #define EPP_NTHF              0x20
145 #define EPP_NTAEF             0x10
146 #define EPP_NTEF              EPP_PTTBIT
147
148 #define EPP_TX_FIFO_ENABLE    0x10
149 #define EPP_RX_FIFO_ENABLE    0x08
150 #define EPP_MODEM_ENABLE      0x20
151 #define EPP_LEDS              0xC0
152 #define EPP_IRQ_ENABLE        0x10
153
154 /* Xilinx 4k JTAG instructions */
155 #define XC4K_IRLENGTH   3
156 #define XC4K_EXTEST     0
157 #define XC4K_PRELOAD    1
158 #define XC4K_CONFIGURE  5
159 #define XC4K_BYPASS     7
160
161 #define EPP_CONVENTIONAL  0
162 #define EPP_FPGA          1
163 #define EPP_FPGAEXTSTATUS 2
164
165 #define TXBUFFER_SIZE     ((HDLCDRV_MAXFLEN*6/5)+8)
166
167 /* ---------------------------------------------------------------------- */
168 /*
169  * Information that need to be kept for each board.
170  */
171
172 struct baycom_state {
173         int magic;
174
175         struct pardevice *pdev;
176         unsigned int work_running;
177         struct work_struct run_work;
178         unsigned int modem;
179         unsigned int bitrate;
180         unsigned char stat;
181
182         struct {
183                 unsigned int intclk;
184                 unsigned int fclk;
185                 unsigned int bps;
186                 unsigned int extmodem;
187                 unsigned int loopback;
188         } cfg;
189
190         struct hdlcdrv_channel_params ch_params;
191
192         struct {
193                 unsigned int bitbuf, bitstream, numbits, state;
194                 unsigned char *bufptr;
195                 int bufcnt;
196                 unsigned char buf[TXBUFFER_SIZE];
197         } hdlcrx;
198
199         struct {
200                 int calibrate;
201                 int slotcnt;
202                 int flags;
203                 enum { tx_idle = 0, tx_keyup, tx_data, tx_tail } state;
204                 unsigned char *bufptr;
205                 int bufcnt;
206                 unsigned char buf[TXBUFFER_SIZE];
207         } hdlctx;
208
209         struct net_device_stats stats;
210         unsigned int ptt_keyed;
211         struct sk_buff *skb;  /* next transmit packet  */
212
213 #ifdef BAYCOM_DEBUG
214         struct debug_vals {
215                 unsigned long last_jiffies;
216                 unsigned cur_intcnt;
217                 unsigned last_intcnt;
218                 int cur_pllcorr;
219                 int last_pllcorr;
220                 unsigned int mod_cycles;
221                 unsigned int demod_cycles;
222         } debug_vals;
223 #endif /* BAYCOM_DEBUG */
224 };
225
226 /* --------------------------------------------------------------------- */
227
228 #define KISS_VERBOSE
229
230 /* --------------------------------------------------------------------- */
231
232 #define PARAM_TXDELAY   1
233 #define PARAM_PERSIST   2
234 #define PARAM_SLOTTIME  3
235 #define PARAM_TXTAIL    4
236 #define PARAM_FULLDUP   5
237 #define PARAM_HARDWARE  6
238 #define PARAM_RETURN    255
239
240 /* --------------------------------------------------------------------- */
241 /*
242  * the CRC routines are stolen from WAMPES
243  * by Dieter Deyke
244  */
245
246
247 /*---------------------------------------------------------------------------*/
248
249 #if 0
250 static inline void append_crc_ccitt(unsigned char *buffer, int len)
251 {
252         unsigned int crc = 0xffff;
253
254         for (;len>0;len--)
255                 crc = (crc >> 8) ^ crc_ccitt_table[(crc ^ *buffer++) & 0xff];
256         crc ^= 0xffff;
257         *buffer++ = crc;
258         *buffer++ = crc >> 8;
259 }
260 #endif
261
262 /*---------------------------------------------------------------------------*/
263
264 static inline int check_crc_ccitt(const unsigned char *buf, int cnt)
265 {
266         return (crc_ccitt(0xffff, buf, cnt) & 0xffff) == 0xf0b8;
267 }
268
269 /*---------------------------------------------------------------------------*/
270
271 static inline int calc_crc_ccitt(const unsigned char *buf, int cnt)
272 {
273         return (crc_ccitt(0xffff, buf, cnt) ^ 0xffff) & 0xffff;
274 }
275
276 /* ---------------------------------------------------------------------- */
277
278 #define tenms_to_flags(bc,tenms) ((tenms * bc->bitrate) / 800)
279
280 /* --------------------------------------------------------------------- */
281
282 static inline void baycom_int_freq(struct baycom_state *bc)
283 {
284 #ifdef BAYCOM_DEBUG
285         unsigned long cur_jiffies = jiffies;
286         /*
287          * measure the interrupt frequency
288          */
289         bc->debug_vals.cur_intcnt++;
290         if ((cur_jiffies - bc->debug_vals.last_jiffies) >= HZ) {
291                 bc->debug_vals.last_jiffies = cur_jiffies;
292                 bc->debug_vals.last_intcnt = bc->debug_vals.cur_intcnt;
293                 bc->debug_vals.cur_intcnt = 0;
294                 bc->debug_vals.last_pllcorr = bc->debug_vals.cur_pllcorr;
295                 bc->debug_vals.cur_pllcorr = 0;
296         }
297 #endif /* BAYCOM_DEBUG */
298 }
299
300 /* ---------------------------------------------------------------------- */
301 /*
302  *    eppconfig_path should be setable  via /proc/sys.
303  */
304
305 static char eppconfig_path[256] = "/usr/sbin/eppfpga";
306
307 static char *envp[] = { "HOME=/", "TERM=linux", "PATH=/usr/bin:/bin", NULL };
308
309 /* eppconfig: called during ifconfig up to configure the modem */
310 static int eppconfig(struct baycom_state *bc)
311 {
312         char modearg[256];
313         char portarg[16];
314         char *argv[] = { eppconfig_path, "-s", "-p", portarg, "-m", modearg,
315                          NULL };
316
317         /* set up arguments */
318         sprintf(modearg, "%sclk,%smodem,fclk=%d,bps=%d,divider=%d%s,extstat",
319                 bc->cfg.intclk ? "int" : "ext",
320                 bc->cfg.extmodem ? "ext" : "int", bc->cfg.fclk, bc->cfg.bps,
321                 (bc->cfg.fclk + 8 * bc->cfg.bps) / (16 * bc->cfg.bps),
322                 bc->cfg.loopback ? ",loopback" : "");
323         sprintf(portarg, "%ld", bc->pdev->port->base);
324         printk(KERN_DEBUG "%s: %s -s -p %s -m %s\n", bc_drvname, eppconfig_path, portarg, modearg);
325
326         return call_usermodehelper(eppconfig_path, argv, envp, 1);
327 }
328
329 /* ---------------------------------------------------------------------- */
330
331 static void epp_interrupt(int irq, void *dev_id, struct pt_regs *regs)
332 {
333 }
334
335 /* ---------------------------------------------------------------------- */
336
337 static inline void do_kiss_params(struct baycom_state *bc,
338                                   unsigned char *data, unsigned long len)
339 {
340
341 #ifdef KISS_VERBOSE
342 #define PKP(a,b) printk(KERN_INFO "baycomm_epp: channel params: " a "\n", b)
343 #else /* KISS_VERBOSE */              
344 #define PKP(a,b) 
345 #endif /* KISS_VERBOSE */             
346
347         if (len < 2)
348                 return;
349         switch(data[0]) {
350         case PARAM_TXDELAY:
351                 bc->ch_params.tx_delay = data[1];
352                 PKP("TX delay = %ums", 10 * bc->ch_params.tx_delay);
353                 break;
354         case PARAM_PERSIST:   
355                 bc->ch_params.ppersist = data[1];
356                 PKP("p persistence = %u", bc->ch_params.ppersist);
357                 break;
358         case PARAM_SLOTTIME:  
359                 bc->ch_params.slottime = data[1];
360                 PKP("slot time = %ums", bc->ch_params.slottime);
361                 break;
362         case PARAM_TXTAIL:    
363                 bc->ch_params.tx_tail = data[1];
364                 PKP("TX tail = %ums", bc->ch_params.tx_tail);
365                 break;
366         case PARAM_FULLDUP:   
367                 bc->ch_params.fulldup = !!data[1];
368                 PKP("%s duplex", bc->ch_params.fulldup ? "full" : "half");
369                 break;
370         default:
371                 break;
372         }
373 #undef PKP
374 }
375
376 /* --------------------------------------------------------------------- */
377 /*
378  * high performance HDLC encoder
379  * yes, it's ugly, but generates pretty good code
380  */
381
382 #define ENCODEITERA(j)                         \
383 ({                                             \
384         if (!(notbitstream & (0x1f0 << j)))    \
385                 goto stuff##j;                 \
386   encodeend##j:         ;                      \
387 })
388
389 #define ENCODEITERB(j)                                          \
390 ({                                                              \
391   stuff##j:                                                     \
392         bitstream &= ~(0x100 << j);                             \
393         bitbuf = (bitbuf & (((2 << j) << numbit) - 1)) |        \
394                 ((bitbuf & ~(((2 << j) << numbit) - 1)) << 1);  \
395         numbit++;                                               \
396         notbitstream = ~bitstream;                              \
397         goto encodeend##j;                                      \
398 })
399
400
401 static void encode_hdlc(struct baycom_state *bc)
402 {
403         struct sk_buff *skb;
404         unsigned char *wp, *bp;
405         int pkt_len;
406         unsigned bitstream, notbitstream, bitbuf, numbit, crc;
407         unsigned char crcarr[2];
408         
409         if (bc->hdlctx.bufcnt > 0)
410                 return;
411         skb = bc->skb;
412         if (!skb)
413                 return;
414         bc->skb = NULL;
415         pkt_len = skb->len-1; /* strip KISS byte */
416         wp = bc->hdlctx.buf;
417         bp = skb->data+1;
418         crc = calc_crc_ccitt(bp, pkt_len);
419         crcarr[0] = crc;
420         crcarr[1] = crc >> 8;
421         *wp++ = 0x7e;
422         bitstream = bitbuf = numbit = 0;
423         while (pkt_len > -2) {
424                 bitstream >>= 8;
425                 bitstream |= ((unsigned int)*bp) << 8;
426                 bitbuf |= ((unsigned int)*bp) << numbit;
427                 notbitstream = ~bitstream;
428                 bp++;
429                 pkt_len--;
430                 if (!pkt_len)
431                         bp = crcarr;
432                 ENCODEITERA(0);
433                 ENCODEITERA(1);
434                 ENCODEITERA(2);
435                 ENCODEITERA(3);
436                 ENCODEITERA(4);
437                 ENCODEITERA(5);
438                 ENCODEITERA(6);
439                 ENCODEITERA(7);
440                 goto enditer;
441                 ENCODEITERB(0);
442                 ENCODEITERB(1);
443                 ENCODEITERB(2);
444                 ENCODEITERB(3);
445                 ENCODEITERB(4);
446                 ENCODEITERB(5);
447                 ENCODEITERB(6);
448                 ENCODEITERB(7);
449         enditer:
450                 numbit += 8;
451                 while (numbit >= 8) {
452                         *wp++ = bitbuf;
453                         bitbuf >>= 8;
454                         numbit -= 8;
455                 }
456         }
457         bitbuf |= 0x7e7e << numbit;
458         numbit += 16;
459         while (numbit >= 8) {
460                 *wp++ = bitbuf;
461                 bitbuf >>= 8;
462                 numbit -= 8;
463         }
464         bc->hdlctx.bufptr = bc->hdlctx.buf;
465         bc->hdlctx.bufcnt = wp - bc->hdlctx.buf;
466         dev_kfree_skb(skb);
467         bc->stats.tx_packets++;
468 }
469
470 /* ---------------------------------------------------------------------- */
471
472 static unsigned short random_seed;
473
474 static inline unsigned short random_num(void)
475 {
476         random_seed = 28629 * random_seed + 157;
477         return random_seed;
478 }
479
480 /* ---------------------------------------------------------------------- */
481
482 static int transmit(struct baycom_state *bc, int cnt, unsigned char stat)
483 {
484         struct parport *pp = bc->pdev->port;
485         unsigned char tmp[128];
486         int i, j;
487
488         if (bc->hdlctx.state == tx_tail && !(stat & EPP_PTTBIT))
489                 bc->hdlctx.state = tx_idle;
490         if (bc->hdlctx.state == tx_idle && bc->hdlctx.calibrate <= 0) {
491                 if (bc->hdlctx.bufcnt <= 0)
492                         encode_hdlc(bc);
493                 if (bc->hdlctx.bufcnt <= 0)
494                         return 0;
495                 if (!bc->ch_params.fulldup) {
496                         if (!(stat & EPP_DCDBIT)) {
497                                 bc->hdlctx.slotcnt = bc->ch_params.slottime;
498                                 return 0;
499                         }
500                         if ((--bc->hdlctx.slotcnt) > 0)
501                                 return 0;
502                         bc->hdlctx.slotcnt = bc->ch_params.slottime;
503                         if ((random_num() % 256) > bc->ch_params.ppersist)
504                                 return 0;
505                 }
506         }
507         if (bc->hdlctx.state == tx_idle && bc->hdlctx.bufcnt > 0) {
508                 bc->hdlctx.state = tx_keyup;
509                 bc->hdlctx.flags = tenms_to_flags(bc, bc->ch_params.tx_delay);
510                 bc->ptt_keyed++;
511         }
512         while (cnt > 0) {
513                 switch (bc->hdlctx.state) {
514                 case tx_keyup:
515                         i = min_t(int, cnt, bc->hdlctx.flags);
516                         cnt -= i;
517                         bc->hdlctx.flags -= i;
518                         if (bc->hdlctx.flags <= 0)
519                                 bc->hdlctx.state = tx_data;
520                         memset(tmp, 0x7e, sizeof(tmp));
521                         while (i > 0) {
522                                 j = (i > sizeof(tmp)) ? sizeof(tmp) : i;
523                                 if (j != pp->ops->epp_write_data(pp, tmp, j, 0))
524                                         return -1;
525                                 i -= j;
526                         }
527                         break;
528
529                 case tx_data:
530                         if (bc->hdlctx.bufcnt <= 0) {
531                                 encode_hdlc(bc);
532                                 if (bc->hdlctx.bufcnt <= 0) {
533                                         bc->hdlctx.state = tx_tail;
534                                         bc->hdlctx.flags = tenms_to_flags(bc, bc->ch_params.tx_tail);
535                                         break;
536                                 }
537                         }
538                         i = min_t(int, cnt, bc->hdlctx.bufcnt);
539                         bc->hdlctx.bufcnt -= i;
540                         cnt -= i;
541                         if (i != pp->ops->epp_write_data(pp, bc->hdlctx.bufptr, i, 0))
542                                         return -1;
543                         bc->hdlctx.bufptr += i;
544                         break;
545                         
546                 case tx_tail:
547                         encode_hdlc(bc);
548                         if (bc->hdlctx.bufcnt > 0) {
549                                 bc->hdlctx.state = tx_data;
550                                 break;
551                         }
552                         i = min_t(int, cnt, bc->hdlctx.flags);
553                         if (i) {
554                                 cnt -= i;
555                                 bc->hdlctx.flags -= i;
556                                 memset(tmp, 0x7e, sizeof(tmp));
557                                 while (i > 0) {
558                                         j = (i > sizeof(tmp)) ? sizeof(tmp) : i;
559                                         if (j != pp->ops->epp_write_data(pp, tmp, j, 0))
560                                                 return -1;
561                                         i -= j;
562                                 }
563                                 break;
564                         }
565
566                 default:  /* fall through */
567                         if (bc->hdlctx.calibrate <= 0)
568                                 return 0;
569                         i = min_t(int, cnt, bc->hdlctx.calibrate);
570                         cnt -= i;
571                         bc->hdlctx.calibrate -= i;
572                         memset(tmp, 0, sizeof(tmp));
573                         while (i > 0) {
574                                 j = (i > sizeof(tmp)) ? sizeof(tmp) : i;
575                                 if (j != pp->ops->epp_write_data(pp, tmp, j, 0))
576                                         return -1;
577                                 i -= j;
578                         }
579                         break;
580                 }
581         }
582         return 0;
583 }
584
585 /* ---------------------------------------------------------------------- */
586
587 static void do_rxpacket(struct net_device *dev)
588 {
589         struct baycom_state *bc = netdev_priv(dev);
590         struct sk_buff *skb;
591         unsigned char *cp;
592         unsigned pktlen;
593
594         if (bc->hdlcrx.bufcnt < 4) 
595                 return;
596         if (!check_crc_ccitt(bc->hdlcrx.buf, bc->hdlcrx.bufcnt)) 
597                 return;
598         pktlen = bc->hdlcrx.bufcnt-2+1; /* KISS kludge */
599         if (!(skb = dev_alloc_skb(pktlen))) {
600                 printk("%s: memory squeeze, dropping packet\n", dev->name);
601                 bc->stats.rx_dropped++;
602                 return;
603         }
604         skb->dev = dev;
605         cp = skb_put(skb, pktlen);
606         *cp++ = 0; /* KISS kludge */
607         memcpy(cp, bc->hdlcrx.buf, pktlen - 1);
608         skb->protocol = htons(ETH_P_AX25);
609         skb->mac.raw = skb->data;
610         netif_rx(skb);
611         dev->last_rx = jiffies;
612         bc->stats.rx_packets++;
613 }
614
615 #define DECODEITERA(j)                                                        \
616 ({                                                                            \
617         if (!(notbitstream & (0x0fc << j)))              /* flag or abort */  \
618                 goto flgabrt##j;                                              \
619         if ((bitstream & (0x1f8 << j)) == (0xf8 << j))   /* stuffed bit */    \
620                 goto stuff##j;                                                \
621   enditer##j:      ;                                                           \
622 })
623
624 #define DECODEITERB(j)                                                                 \
625 ({                                                                                     \
626   flgabrt##j:                                                                          \
627         if (!(notbitstream & (0x1fc << j))) {              /* abort received */        \
628                 state = 0;                                                             \
629                 goto enditer##j;                                                       \
630         }                                                                              \
631         if ((bitstream & (0x1fe << j)) != (0x0fc << j))   /* flag received */          \
632                 goto enditer##j;                                                       \
633         if (state)                                                                     \
634                 do_rxpacket(dev);                                                      \
635         bc->hdlcrx.bufcnt = 0;                                                         \
636         bc->hdlcrx.bufptr = bc->hdlcrx.buf;                                            \
637         state = 1;                                                                     \
638         numbits = 7-j;                                                                 \
639         goto enditer##j;                                                               \
640   stuff##j:                                                                            \
641         numbits--;                                                                     \
642         bitbuf = (bitbuf & ((~0xff) << j)) | ((bitbuf & ~((~0xff) << j)) << 1);        \
643         goto enditer##j;                                                               \
644 })
645         
646 static int receive(struct net_device *dev, int cnt)
647 {
648         struct baycom_state *bc = netdev_priv(dev);
649         struct parport *pp = bc->pdev->port;
650         unsigned int bitbuf, notbitstream, bitstream, numbits, state;
651         unsigned char tmp[128];
652         unsigned char *cp;
653         int cnt2, ret = 0;
654         
655         numbits = bc->hdlcrx.numbits;
656         state = bc->hdlcrx.state;
657         bitstream = bc->hdlcrx.bitstream;
658         bitbuf = bc->hdlcrx.bitbuf;
659         while (cnt > 0) {
660                 cnt2 = (cnt > sizeof(tmp)) ? sizeof(tmp) : cnt;
661                 cnt -= cnt2;
662                 if (cnt2 != pp->ops->epp_read_data(pp, tmp, cnt2, 0)) {
663                         ret = -1;
664                         break;
665                 }
666                 cp = tmp;
667                 for (; cnt2 > 0; cnt2--, cp++) {
668                         bitstream >>= 8;
669                         bitstream |= (*cp) << 8;
670                         bitbuf >>= 8;
671                         bitbuf |= (*cp) << 8;
672                         numbits += 8;
673                         notbitstream = ~bitstream;
674                         DECODEITERA(0);
675                         DECODEITERA(1);
676                         DECODEITERA(2);
677                         DECODEITERA(3);
678                         DECODEITERA(4);
679                         DECODEITERA(5);
680                         DECODEITERA(6);
681                         DECODEITERA(7);
682                         goto enddec;
683                         DECODEITERB(0);
684                         DECODEITERB(1);
685                         DECODEITERB(2);
686                         DECODEITERB(3);
687                         DECODEITERB(4);
688                         DECODEITERB(5);
689                         DECODEITERB(6);
690                         DECODEITERB(7);
691                 enddec:
692                         while (state && numbits >= 8) {
693                                 if (bc->hdlcrx.bufcnt >= TXBUFFER_SIZE) {
694                                         state = 0;
695                                 } else {
696                                         *(bc->hdlcrx.bufptr)++ = bitbuf >> (16-numbits);
697                                         bc->hdlcrx.bufcnt++;
698                                         numbits -= 8;
699                                 }
700                         }
701                 }
702         }
703         bc->hdlcrx.numbits = numbits;
704         bc->hdlcrx.state = state;
705         bc->hdlcrx.bitstream = bitstream;
706         bc->hdlcrx.bitbuf = bitbuf;
707         return ret;
708 }
709
710 /* --------------------------------------------------------------------- */
711
712 #ifdef __i386__
713 #include <asm/msr.h>
714 #define GETTICK(x)                                                \
715 ({                                                                \
716         if (cpu_has_tsc)                                          \
717                 rdtscl(x);                                        \
718 })
719 #else /* __i386__ */
720 #define GETTICK(x)
721 #endif /* __i386__ */
722
723 static void epp_bh(struct net_device *dev)
724 {
725         struct baycom_state *bc;
726         struct parport *pp;
727         unsigned char stat;
728         unsigned char tmp[2];
729         unsigned int time1 = 0, time2 = 0, time3 = 0;
730         int cnt, cnt2;
731         
732         bc = netdev_priv(dev);
733         if (!bc->work_running)
734                 return;
735         baycom_int_freq(bc);
736         pp = bc->pdev->port;
737         /* update status */
738         if (pp->ops->epp_read_addr(pp, &stat, 1, 0) != 1)
739                 goto epptimeout;
740         bc->stat = stat;
741         bc->debug_vals.last_pllcorr = stat;
742         GETTICK(time1);
743         if (bc->modem == EPP_FPGAEXTSTATUS) {
744                 /* get input count */
745                 tmp[0] = EPP_TX_FIFO_ENABLE|EPP_RX_FIFO_ENABLE|EPP_MODEM_ENABLE|1;
746                 if (pp->ops->epp_write_addr(pp, tmp, 1, 0) != 1)
747                         goto epptimeout;
748                 if (pp->ops->epp_read_addr(pp, tmp, 2, 0) != 2)
749                         goto epptimeout;
750                 cnt = tmp[0] | (tmp[1] << 8);
751                 cnt &= 0x7fff;
752                 /* get output count */
753                 tmp[0] = EPP_TX_FIFO_ENABLE|EPP_RX_FIFO_ENABLE|EPP_MODEM_ENABLE|2;
754                 if (pp->ops->epp_write_addr(pp, tmp, 1, 0) != 1)
755                         goto epptimeout;
756                 if (pp->ops->epp_read_addr(pp, tmp, 2, 0) != 2)
757                         goto epptimeout;
758                 cnt2 = tmp[0] | (tmp[1] << 8);
759                 cnt2 = 16384 - (cnt2 & 0x7fff);
760                 /* return to normal */
761                 tmp[0] = EPP_TX_FIFO_ENABLE|EPP_RX_FIFO_ENABLE|EPP_MODEM_ENABLE;
762                 if (pp->ops->epp_write_addr(pp, tmp, 1, 0) != 1)
763                         goto epptimeout;
764                 if (transmit(bc, cnt2, stat))
765                         goto epptimeout;
766                 GETTICK(time2);
767                 if (receive(dev, cnt))
768                         goto epptimeout;
769                 if (pp->ops->epp_read_addr(pp, &stat, 1, 0) != 1)
770                         goto epptimeout;
771                 bc->stat = stat;
772         } else {
773                 /* try to tx */
774                 switch (stat & (EPP_NTAEF|EPP_NTHF)) {
775                 case EPP_NTHF:
776                         cnt = 2048 - 256;
777                         break;
778                 
779                 case EPP_NTAEF:
780                         cnt = 2048 - 1793;
781                         break;
782                 
783                 case 0:
784                         cnt = 0;
785                         break;
786                 
787                 default:
788                         cnt = 2048 - 1025;
789                         break;
790                 }
791                 if (transmit(bc, cnt, stat))
792                         goto epptimeout;
793                 GETTICK(time2);
794                 /* do receiver */
795                 while ((stat & (EPP_NRAEF|EPP_NRHF)) != EPP_NRHF) {
796                         switch (stat & (EPP_NRAEF|EPP_NRHF)) {
797                         case EPP_NRAEF:
798                                 cnt = 1025;
799                                 break;
800
801                         case 0:
802                                 cnt = 1793;
803                                 break;
804
805                         default:
806                                 cnt = 256;
807                                 break;
808                         }
809                         if (receive(dev, cnt))
810                                 goto epptimeout;
811                         if (pp->ops->epp_read_addr(pp, &stat, 1, 0) != 1)
812                                 goto epptimeout;
813                 }
814                 cnt = 0;
815                 if (bc->bitrate < 50000)
816                         cnt = 256;
817                 else if (bc->bitrate < 100000)
818                         cnt = 128;
819                 while (cnt > 0 && stat & EPP_NREF) {
820                         if (receive(dev, 1))
821                                 goto epptimeout;
822                         cnt--;
823                         if (pp->ops->epp_read_addr(pp, &stat, 1, 0) != 1)
824                                 goto epptimeout;
825                 }
826         }
827         GETTICK(time3);
828 #ifdef BAYCOM_DEBUG
829         bc->debug_vals.mod_cycles = time2 - time1;
830         bc->debug_vals.demod_cycles = time3 - time2;
831 #endif /* BAYCOM_DEBUG */
832         schedule_delayed_work(&bc->run_work, 1);
833         if (!bc->skb)
834                 netif_wake_queue(dev);
835         return;
836  epptimeout:
837         printk(KERN_ERR "%s: EPP timeout!\n", bc_drvname);
838 }
839
840 /* ---------------------------------------------------------------------- */
841 /*
842  * ===================== network driver interface =========================
843  */
844
845 static int baycom_send_packet(struct sk_buff *skb, struct net_device *dev)
846 {
847         struct baycom_state *bc = netdev_priv(dev);
848
849         if (skb->data[0] != 0) {
850                 do_kiss_params(bc, skb->data, skb->len);
851                 dev_kfree_skb(skb);
852                 return 0;
853         }
854         if (bc->skb)
855                 return -1;
856         /* strip KISS byte */
857         if (skb->len >= HDLCDRV_MAXFLEN+1 || skb->len < 3) {
858                 dev_kfree_skb(skb);
859                 return 0;
860         }
861         netif_stop_queue(dev);
862         bc->skb = skb;
863         return 0;
864 }
865
866 /* --------------------------------------------------------------------- */
867
868 static int baycom_set_mac_address(struct net_device *dev, void *addr)
869 {
870         struct sockaddr *sa = (struct sockaddr *)addr;
871
872         /* addr is an AX.25 shifted ASCII mac address */
873         memcpy(dev->dev_addr, sa->sa_data, dev->addr_len); 
874         return 0;                                         
875 }
876
877 /* --------------------------------------------------------------------- */
878
879 static struct net_device_stats *baycom_get_stats(struct net_device *dev)
880 {
881         struct baycom_state *bc = netdev_priv(dev);
882
883         /* 
884          * Get the current statistics.  This may be called with the
885          * card open or closed. 
886          */
887         return &bc->stats;
888 }
889
890 /* --------------------------------------------------------------------- */
891
892 static void epp_wakeup(void *handle)
893 {
894         struct net_device *dev = (struct net_device *)handle;
895         struct baycom_state *bc = netdev_priv(dev);
896
897         printk(KERN_DEBUG "baycom_epp: %s: why am I being woken up?\n", dev->name);
898         if (!parport_claim(bc->pdev))
899                 printk(KERN_DEBUG "baycom_epp: %s: I'm broken.\n", dev->name);
900 }
901
902 /* --------------------------------------------------------------------- */
903
904 /*
905  * Open/initialize the board. This is called (in the current kernel)
906  * sometime after booting when the 'ifconfig' program is run.
907  *
908  * This routine should set everything up anew at each open, even
909  * registers that "should" only need to be set once at boot, so that
910  * there is non-reboot way to recover if something goes wrong.
911  */
912
913 static int epp_open(struct net_device *dev)
914 {
915         struct baycom_state *bc = netdev_priv(dev);
916         struct parport *pp = parport_find_base(dev->base_addr);
917         unsigned int i, j;
918         unsigned char tmp[128];
919         unsigned char stat;
920         unsigned long tstart;
921         
922         if (!pp) {
923                 printk(KERN_ERR "%s: parport at 0x%lx unknown\n", bc_drvname, dev->base_addr);
924                 return -ENXIO;
925         }
926 #if 0
927         if (pp->irq < 0) {
928                 printk(KERN_ERR "%s: parport at 0x%lx has no irq\n", bc_drvname, pp->base);
929                 parport_put_port(pp);
930                 return -ENXIO;
931         }
932 #endif
933         if ((~pp->modes) & (PARPORT_MODE_TRISTATE | PARPORT_MODE_PCSPP | PARPORT_MODE_SAFEININT)) {
934                 printk(KERN_ERR "%s: parport at 0x%lx cannot be used\n",
935                        bc_drvname, pp->base);
936                 parport_put_port(pp);
937                 return -EIO;
938         }
939         memset(&bc->modem, 0, sizeof(bc->modem));
940         bc->pdev = parport_register_device(pp, dev->name, NULL, epp_wakeup, 
941                                         epp_interrupt, PARPORT_DEV_EXCL, dev);
942         parport_put_port(pp);
943         if (!bc->pdev) {
944                 printk(KERN_ERR "%s: cannot register parport at 0x%lx\n", bc_drvname, pp->base);
945                 return -ENXIO;
946         }
947         if (parport_claim(bc->pdev)) {
948                 printk(KERN_ERR "%s: parport at 0x%lx busy\n", bc_drvname, pp->base);
949                 parport_unregister_device(bc->pdev);
950                 return -EBUSY;
951         }
952         dev->irq = /*pp->irq*/ 0;
953         INIT_WORK(&bc->run_work, (void *)(void *)epp_bh, dev);
954         bc->work_running = 1;
955         bc->modem = EPP_CONVENTIONAL;
956         if (eppconfig(bc))
957                 printk(KERN_INFO "%s: no FPGA detected, assuming conventional EPP modem\n", bc_drvname);
958         else
959                 bc->modem = /*EPP_FPGA*/ EPP_FPGAEXTSTATUS;
960         parport_write_control(pp, LPTCTRL_PROGRAM); /* prepare EPP mode; we aren't using interrupts */
961         /* reset the modem */
962         tmp[0] = 0;
963         tmp[1] = EPP_TX_FIFO_ENABLE|EPP_RX_FIFO_ENABLE|EPP_MODEM_ENABLE;
964         if (pp->ops->epp_write_addr(pp, tmp, 2, 0) != 2)
965                 goto epptimeout;
966         /* autoprobe baud rate */
967         tstart = jiffies;
968         i = 0;
969         while ((signed)(jiffies-tstart-HZ/3) < 0) {
970                 if (pp->ops->epp_read_addr(pp, &stat, 1, 0) != 1)
971                         goto epptimeout;
972                 if ((stat & (EPP_NRAEF|EPP_NRHF)) == EPP_NRHF) {
973                         schedule();
974                         continue;
975                 }
976                 if (pp->ops->epp_read_data(pp, tmp, 128, 0) != 128)
977                         goto epptimeout;
978                 if (pp->ops->epp_read_data(pp, tmp, 128, 0) != 128)
979                         goto epptimeout;
980                 i += 256;
981         }
982         for (j = 0; j < 256; j++) {
983                 if (pp->ops->epp_read_addr(pp, &stat, 1, 0) != 1)
984                         goto epptimeout;
985                 if (!(stat & EPP_NREF))
986                         break;
987                 if (pp->ops->epp_read_data(pp, tmp, 1, 0) != 1)
988                         goto epptimeout;
989                 i++;
990         }
991         tstart = jiffies - tstart;
992         bc->bitrate = i * (8 * HZ) / tstart;
993         j = 1;
994         i = bc->bitrate >> 3;
995         while (j < 7 && i > 150) {
996                 j++;
997                 i >>= 1;
998         }
999         printk(KERN_INFO "%s: autoprobed bitrate: %d  int divider: %d  int rate: %d\n", 
1000                bc_drvname, bc->bitrate, j, bc->bitrate >> (j+2));
1001         tmp[0] = EPP_TX_FIFO_ENABLE|EPP_RX_FIFO_ENABLE|EPP_MODEM_ENABLE/*|j*/;
1002         if (pp->ops->epp_write_addr(pp, tmp, 1, 0) != 1)
1003                 goto epptimeout;
1004         /*
1005          * initialise hdlc variables
1006          */
1007         bc->hdlcrx.state = 0;
1008         bc->hdlcrx.numbits = 0;
1009         bc->hdlctx.state = tx_idle;
1010         bc->hdlctx.bufcnt = 0;
1011         bc->hdlctx.slotcnt = bc->ch_params.slottime;
1012         bc->hdlctx.calibrate = 0;
1013         /* start the bottom half stuff */
1014         schedule_delayed_work(&bc->run_work, 1);
1015         netif_start_queue(dev);
1016         return 0;
1017
1018  epptimeout:
1019         printk(KERN_ERR "%s: epp timeout during bitrate probe\n", bc_drvname);
1020         parport_write_control(pp, 0); /* reset the adapter */
1021         parport_release(bc->pdev);
1022         parport_unregister_device(bc->pdev);
1023         return -EIO;
1024 }
1025
1026 /* --------------------------------------------------------------------- */
1027
1028 static int epp_close(struct net_device *dev)
1029 {
1030         struct baycom_state *bc = netdev_priv(dev);
1031         struct parport *pp = bc->pdev->port;
1032         unsigned char tmp[1];
1033
1034         bc->work_running = 0;
1035         flush_scheduled_work();
1036         bc->stat = EPP_DCDBIT;
1037         tmp[0] = 0;
1038         pp->ops->epp_write_addr(pp, tmp, 1, 0);
1039         parport_write_control(pp, 0); /* reset the adapter */
1040         parport_release(bc->pdev);
1041         parport_unregister_device(bc->pdev);
1042         if (bc->skb)
1043                 dev_kfree_skb(bc->skb);
1044         bc->skb = NULL;
1045         printk(KERN_INFO "%s: close epp at iobase 0x%lx irq %u\n",
1046                bc_drvname, dev->base_addr, dev->irq);
1047         return 0;
1048 }
1049
1050 /* --------------------------------------------------------------------- */
1051
1052 static int baycom_setmode(struct baycom_state *bc, const char *modestr)
1053 {
1054         const char *cp;
1055
1056         if (strstr(modestr,"intclk"))
1057                 bc->cfg.intclk = 1;
1058         if (strstr(modestr,"extclk"))
1059                 bc->cfg.intclk = 0;
1060         if (strstr(modestr,"intmodem"))
1061                 bc->cfg.extmodem = 0;
1062         if (strstr(modestr,"extmodem"))
1063                 bc->cfg.extmodem = 1;
1064         if (strstr(modestr,"noloopback"))
1065                 bc->cfg.loopback = 0;
1066         if (strstr(modestr,"loopback"))
1067                 bc->cfg.loopback = 1;
1068         if ((cp = strstr(modestr,"fclk="))) {
1069                 bc->cfg.fclk = simple_strtoul(cp+5, NULL, 0);
1070                 if (bc->cfg.fclk < 1000000)
1071                         bc->cfg.fclk = 1000000;
1072                 if (bc->cfg.fclk > 25000000)
1073                         bc->cfg.fclk = 25000000;
1074         }
1075         if ((cp = strstr(modestr,"bps="))) {
1076                 bc->cfg.bps = simple_strtoul(cp+4, NULL, 0);
1077                 if (bc->cfg.bps < 1000)
1078                         bc->cfg.bps = 1000;
1079                 if (bc->cfg.bps > 1500000)
1080                         bc->cfg.bps = 1500000;
1081         }
1082         return 0;
1083 }
1084
1085 /* --------------------------------------------------------------------- */
1086
1087 static int baycom_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
1088 {
1089         struct baycom_state *bc = netdev_priv(dev);
1090         struct hdlcdrv_ioctl hi;
1091
1092         if (cmd != SIOCDEVPRIVATE)
1093                 return -ENOIOCTLCMD;
1094
1095         if (copy_from_user(&hi, ifr->ifr_data, sizeof(hi)))
1096                 return -EFAULT;
1097         switch (hi.cmd) {
1098         default:
1099                 return -ENOIOCTLCMD;
1100
1101         case HDLCDRVCTL_GETCHANNELPAR:
1102                 hi.data.cp.tx_delay = bc->ch_params.tx_delay;
1103                 hi.data.cp.tx_tail = bc->ch_params.tx_tail;
1104                 hi.data.cp.slottime = bc->ch_params.slottime;
1105                 hi.data.cp.ppersist = bc->ch_params.ppersist;
1106                 hi.data.cp.fulldup = bc->ch_params.fulldup;
1107                 break;
1108
1109         case HDLCDRVCTL_SETCHANNELPAR:
1110                 if (!capable(CAP_NET_ADMIN))
1111                         return -EACCES;
1112                 bc->ch_params.tx_delay = hi.data.cp.tx_delay;
1113                 bc->ch_params.tx_tail = hi.data.cp.tx_tail;
1114                 bc->ch_params.slottime = hi.data.cp.slottime;
1115                 bc->ch_params.ppersist = hi.data.cp.ppersist;
1116                 bc->ch_params.fulldup = hi.data.cp.fulldup;
1117                 bc->hdlctx.slotcnt = 1;
1118                 return 0;
1119                 
1120         case HDLCDRVCTL_GETMODEMPAR:
1121                 hi.data.mp.iobase = dev->base_addr;
1122                 hi.data.mp.irq = dev->irq;
1123                 hi.data.mp.dma = dev->dma;
1124                 hi.data.mp.dma2 = 0;
1125                 hi.data.mp.seriobase = 0;
1126                 hi.data.mp.pariobase = 0;
1127                 hi.data.mp.midiiobase = 0;
1128                 break;
1129
1130         case HDLCDRVCTL_SETMODEMPAR:
1131                 if ((!capable(CAP_SYS_RAWIO)) || netif_running(dev))
1132                         return -EACCES;
1133                 dev->base_addr = hi.data.mp.iobase;
1134                 dev->irq = /*hi.data.mp.irq*/0;
1135                 dev->dma = /*hi.data.mp.dma*/0;
1136                 return 0;       
1137                 
1138         case HDLCDRVCTL_GETSTAT:
1139                 hi.data.cs.ptt = !!(bc->stat & EPP_PTTBIT);
1140                 hi.data.cs.dcd = !(bc->stat & EPP_DCDBIT);
1141                 hi.data.cs.ptt_keyed = bc->ptt_keyed;
1142                 hi.data.cs.tx_packets = bc->stats.tx_packets;
1143                 hi.data.cs.tx_errors = bc->stats.tx_errors;
1144                 hi.data.cs.rx_packets = bc->stats.rx_packets;
1145                 hi.data.cs.rx_errors = bc->stats.rx_errors;
1146                 break;          
1147
1148         case HDLCDRVCTL_OLDGETSTAT:
1149                 hi.data.ocs.ptt = !!(bc->stat & EPP_PTTBIT);
1150                 hi.data.ocs.dcd = !(bc->stat & EPP_DCDBIT);
1151                 hi.data.ocs.ptt_keyed = bc->ptt_keyed;
1152                 break;          
1153
1154         case HDLCDRVCTL_CALIBRATE:
1155                 if (!capable(CAP_SYS_RAWIO))
1156                         return -EACCES;
1157                 bc->hdlctx.calibrate = hi.data.calibrate * bc->bitrate / 8;
1158                 return 0;
1159
1160         case HDLCDRVCTL_DRIVERNAME:
1161                 strncpy(hi.data.drivername, "baycom_epp", sizeof(hi.data.drivername));
1162                 break;
1163                 
1164         case HDLCDRVCTL_GETMODE:
1165                 sprintf(hi.data.modename, "%sclk,%smodem,fclk=%d,bps=%d%s", 
1166                         bc->cfg.intclk ? "int" : "ext",
1167                         bc->cfg.extmodem ? "ext" : "int", bc->cfg.fclk, bc->cfg.bps,
1168                         bc->cfg.loopback ? ",loopback" : "");
1169                 break;
1170
1171         case HDLCDRVCTL_SETMODE:
1172                 if (!capable(CAP_NET_ADMIN) || netif_running(dev))
1173                         return -EACCES;
1174                 hi.data.modename[sizeof(hi.data.modename)-1] = '\0';
1175                 return baycom_setmode(bc, hi.data.modename);
1176
1177         case HDLCDRVCTL_MODELIST:
1178                 strncpy(hi.data.modename, "intclk,extclk,intmodem,extmodem,divider=x",
1179                         sizeof(hi.data.modename));
1180                 break;
1181
1182         case HDLCDRVCTL_MODEMPARMASK:
1183                 return HDLCDRV_PARMASK_IOBASE;
1184
1185         }
1186         if (copy_to_user(ifr->ifr_data, &hi, sizeof(hi)))
1187                 return -EFAULT;
1188         return 0;
1189 }
1190
1191 /* --------------------------------------------------------------------- */
1192
1193 /*
1194  * Check for a network adaptor of this type, and return '0' if one exists.
1195  * If dev->base_addr == 0, probe all likely locations.
1196  * If dev->base_addr == 1, always return failure.
1197  * If dev->base_addr == 2, allocate space for the device and return success
1198  * (detachable devices only).
1199  */
1200 static void baycom_probe(struct net_device *dev)
1201 {
1202         static char ax25_bcast[AX25_ADDR_LEN] = {
1203                 'Q' << 1, 'S' << 1, 'T' << 1, ' ' << 1, ' ' << 1, ' ' << 1, '0' << 1
1204         };
1205         static char ax25_nocall[AX25_ADDR_LEN] = {
1206                 'L' << 1, 'I' << 1, 'N' << 1, 'U' << 1, 'X' << 1, ' ' << 1, '1' << 1
1207         };
1208         const struct hdlcdrv_channel_params dflt_ch_params = { 
1209                 20, 2, 10, 40, 0 
1210         };
1211         struct baycom_state *bc;
1212
1213         /*
1214          * not a real probe! only initialize data structures
1215          */
1216         bc = netdev_priv(dev);
1217         /*
1218          * initialize the baycom_state struct
1219          */
1220         bc->ch_params = dflt_ch_params;
1221         bc->ptt_keyed = 0;
1222
1223         /*
1224          * initialize the device struct
1225          */
1226         dev->open = epp_open;
1227         dev->stop = epp_close;
1228         dev->do_ioctl = baycom_ioctl;
1229         dev->hard_start_xmit = baycom_send_packet;
1230         dev->get_stats = baycom_get_stats;
1231
1232         /* Fill in the fields of the device structure */
1233         bc->skb = NULL;
1234         
1235 #if defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE)
1236         dev->hard_header = ax25_encapsulate;
1237         dev->rebuild_header = ax25_rebuild_header;
1238 #else /* CONFIG_AX25 || CONFIG_AX25_MODULE */
1239         dev->hard_header = NULL;
1240         dev->rebuild_header = NULL;
1241 #endif /* CONFIG_AX25 || CONFIG_AX25_MODULE */
1242         dev->set_mac_address = baycom_set_mac_address;
1243         
1244         dev->type = ARPHRD_AX25;           /* AF_AX25 device */
1245         dev->hard_header_len = AX25_MAX_HEADER_LEN + AX25_BPQ_HEADER_LEN;
1246         dev->mtu = AX25_DEF_PACLEN;        /* eth_mtu is the default */
1247         dev->addr_len = AX25_ADDR_LEN;     /* sizeof an ax.25 address */
1248         memcpy(dev->broadcast, ax25_bcast, AX25_ADDR_LEN);
1249         memcpy(dev->dev_addr, ax25_nocall, AX25_ADDR_LEN);
1250         dev->tx_queue_len = 16;
1251
1252         /* New style flags */
1253         dev->flags = 0;
1254 }
1255
1256 /* --------------------------------------------------------------------- */
1257
1258 /*
1259  * command line settable parameters
1260  */
1261 static const char *mode[NR_PORTS] = { "", };
1262 static int iobase[NR_PORTS] = { 0x378, };
1263
1264 module_param_array(mode, charp, NULL, 0);
1265 MODULE_PARM_DESC(mode, "baycom operating mode");
1266 module_param_array(iobase, int, NULL, 0);
1267 MODULE_PARM_DESC(iobase, "baycom io base address");
1268
1269 MODULE_AUTHOR("Thomas M. Sailer, sailer@ife.ee.ethz.ch, hb9jnx@hb9w.che.eu");
1270 MODULE_DESCRIPTION("Baycom epp amateur radio modem driver");
1271 MODULE_LICENSE("GPL");
1272
1273 /* --------------------------------------------------------------------- */
1274
1275 static void __init baycom_epp_dev_setup(struct net_device *dev)
1276 {
1277         struct baycom_state *bc = netdev_priv(dev);
1278
1279         /*
1280          * initialize part of the baycom_state struct
1281          */
1282         bc->magic = BAYCOM_MAGIC;
1283         bc->cfg.fclk = 19666600;
1284         bc->cfg.bps = 9600;
1285         /*
1286          * initialize part of the device struct
1287          */
1288         baycom_probe(dev);
1289 }
1290
1291 static int __init init_baycomepp(void)
1292 {
1293         int i, found = 0;
1294         char set_hw = 1;
1295
1296         printk(bc_drvinfo);
1297         /*
1298          * register net devices
1299          */
1300         for (i = 0; i < NR_PORTS; i++) {
1301                 struct net_device *dev;
1302                 
1303                 dev = alloc_netdev(sizeof(struct baycom_state), "bce%d",
1304                                    baycom_epp_dev_setup);
1305
1306                 if (!dev) {
1307                         printk(KERN_WARNING "bce%d : out of memory\n", i);
1308                         return found ? 0 : -ENOMEM;
1309                 }
1310                         
1311                 sprintf(dev->name, "bce%d", i);
1312                 dev->base_addr = iobase[i];
1313
1314                 if (!mode[i])
1315                         set_hw = 0;
1316                 if (!set_hw)
1317                         iobase[i] = 0;
1318
1319                 if (register_netdev(dev)) {
1320                         printk(KERN_WARNING "%s: cannot register net device %s\n", bc_drvname, dev->name);
1321                         free_netdev(dev);
1322                         break;
1323                 }
1324                 if (set_hw && baycom_setmode(netdev_priv(dev), mode[i]))
1325                         set_hw = 0;
1326                 baycom_device[i] = dev;
1327                 found++;
1328         }
1329
1330         return found ? 0 : -ENXIO;
1331 }
1332
1333 static void __exit cleanup_baycomepp(void)
1334 {
1335         int i;
1336
1337         for(i = 0; i < NR_PORTS; i++) {
1338                 struct net_device *dev = baycom_device[i];
1339
1340                 if (dev) {
1341                         struct baycom_state *bc = netdev_priv(dev);
1342                         if (bc->magic == BAYCOM_MAGIC) {
1343                                 unregister_netdev(dev);
1344                                 free_netdev(dev);
1345                         } else
1346                                 printk(paranoia_str, "cleanup_module");
1347                 }
1348         }
1349 }
1350
1351 module_init(init_baycomepp);
1352 module_exit(cleanup_baycomepp);
1353
1354 /* --------------------------------------------------------------------- */
1355
1356 #ifndef MODULE
1357
1358 /*
1359  * format: baycom_epp=io,mode
1360  * mode: fpga config options
1361  */
1362
1363 static int __init baycom_epp_setup(char *str)
1364 {
1365         static unsigned __initdata nr_dev = 0;
1366         int ints[2];
1367
1368         if (nr_dev >= NR_PORTS)
1369                 return 0;
1370         str = get_options(str, 2, ints);
1371         if (ints[0] < 1)
1372                 return 0;
1373         mode[nr_dev] = str;
1374         iobase[nr_dev] = ints[1];
1375         nr_dev++;
1376         return 1;
1377 }
1378
1379 __setup("baycom_epp=", baycom_epp_setup);
1380
1381 #endif /* MODULE */
1382 /* --------------------------------------------------------------------- */