i2c: Remove NOP i2c_algorithm.algo_control() methods
[linux-2.6.git] / drivers / media / video / em28xx / em28xx-i2c.c
1 /*
2    em28xx-i2c.c - driver for Empia EM2800/EM2820/2840 USB video capture devices
3
4    Copyright (C) 2005 Ludovico Cavedon <cavedon@sssup.it>
5                       Markus Rechberger <mrechberger@gmail.com>
6                       Mauro Carvalho Chehab <mchehab@infradead.org>
7                       Sascha Sommer <saschasommer@freenet.de>
8
9    This program is free software; you can redistribute it and/or modify
10    it under the terms of the GNU General Public License as published by
11    the Free Software Foundation; either version 2 of the License, or
12    (at your option) any later version.
13
14    This program is distributed in the hope that it will be useful,
15    but WITHOUT ANY WARRANTY; without even the implied warranty of
16    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17    GNU General Public License for more details.
18
19    You should have received a copy of the GNU General Public License
20    along with this program; if not, write to the Free Software
21    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
22  */
23
24 #include <linux/module.h>
25 #include <linux/kernel.h>
26 #include <linux/usb.h>
27 #include <linux/i2c.h>
28 #include <linux/video_decoder.h>
29
30 #include "em28xx.h"
31 #include <media/v4l2-common.h>
32 #include <media/tuner.h>
33
34 /* ----------------------------------------------------------- */
35
36 static unsigned int i2c_scan = 0;
37 module_param(i2c_scan, int, 0444);
38 MODULE_PARM_DESC(i2c_scan, "scan i2c bus at insmod time");
39
40 static unsigned int i2c_debug = 0;
41 module_param(i2c_debug, int, 0644);
42 MODULE_PARM_DESC(i2c_debug, "enable debug messages [i2c]");
43
44 #define dprintk1(lvl,fmt, args...) if (i2c_debug>=lvl) do {\
45                         printk(fmt, ##args); } while (0)
46 #define dprintk2(lvl,fmt, args...) if (i2c_debug>=lvl) do{ \
47                         printk(KERN_DEBUG "%s at %s: " fmt, \
48                         dev->name, __FUNCTION__ , ##args); } while (0)
49
50 /*
51  * em2800_i2c_send_max4()
52  * send up to 4 bytes to the i2c device
53  */
54 static int em2800_i2c_send_max4(struct em28xx *dev, unsigned char addr,
55                                 char *buf, int len)
56 {
57         int ret;
58         int write_timeout;
59         unsigned char b2[6];
60         BUG_ON(len < 1 || len > 4);
61         b2[5] = 0x80 + len - 1;
62         b2[4] = addr;
63         b2[3] = buf[0];
64         if (len > 1)
65                 b2[2] = buf[1];
66         if (len > 2)
67                 b2[1] = buf[2];
68         if (len > 3)
69                 b2[0] = buf[3];
70
71         ret = dev->em28xx_write_regs(dev, 4 - len, &b2[4 - len], 2 + len);
72         if (ret != 2 + len) {
73                 em28xx_warn("writing to i2c device failed (error=%i)\n", ret);
74                 return -EIO;
75         }
76         for (write_timeout = EM2800_I2C_WRITE_TIMEOUT; write_timeout > 0;
77              write_timeout -= 5) {
78                 ret = dev->em28xx_read_reg(dev, 0x05);
79                 if (ret == 0x80 + len - 1)
80                         return len;
81                 msleep(5);
82         }
83         em28xx_warn("i2c write timed out\n");
84         return -EIO;
85 }
86
87 /*
88  * em2800_i2c_send_bytes()
89  */
90 static int em2800_i2c_send_bytes(void *data, unsigned char addr, char *buf,
91                                  short len)
92 {
93         char *bufPtr = buf;
94         int ret;
95         int wrcount = 0;
96         int count;
97         int maxLen = 4;
98         struct em28xx *dev = (struct em28xx *)data;
99         while (len > 0) {
100                 count = (len > maxLen) ? maxLen : len;
101                 ret = em2800_i2c_send_max4(dev, addr, bufPtr, count);
102                 if (ret > 0) {
103                         len -= count;
104                         bufPtr += count;
105                         wrcount += count;
106                 } else
107                         return (ret < 0) ? ret : -EFAULT;
108         }
109         return wrcount;
110 }
111
112 /*
113  * em2800_i2c_check_for_device()
114  * check if there is a i2c_device at the supplied address
115  */
116 static int em2800_i2c_check_for_device(struct em28xx *dev, unsigned char addr)
117 {
118         char msg;
119         int ret;
120         int write_timeout;
121         msg = addr;
122         ret = dev->em28xx_write_regs(dev, 0x04, &msg, 1);
123         if (ret < 0) {
124                 em28xx_warn("setting i2c device address failed (error=%i)\n",
125                             ret);
126                 return ret;
127         }
128         msg = 0x84;
129         ret = dev->em28xx_write_regs(dev, 0x05, &msg, 1);
130         if (ret < 0) {
131                 em28xx_warn("preparing i2c read failed (error=%i)\n", ret);
132                 return ret;
133         }
134         for (write_timeout = EM2800_I2C_WRITE_TIMEOUT; write_timeout > 0;
135              write_timeout -= 5) {
136                 unsigned msg = dev->em28xx_read_reg(dev, 0x5);
137                 if (msg == 0x94)
138                         return -ENODEV;
139                 else if (msg == 0x84)
140                         return 0;
141                 msleep(5);
142         }
143         return -ENODEV;
144 }
145
146 /*
147  * em2800_i2c_recv_bytes()
148  * read from the i2c device
149  */
150 static int em2800_i2c_recv_bytes(struct em28xx *dev, unsigned char addr,
151                                  char *buf, int len)
152 {
153         int ret;
154         /* check for the device and set i2c read address */
155         ret = em2800_i2c_check_for_device(dev, addr);
156         if (ret) {
157                 em28xx_warn
158                     ("preparing read at i2c address 0x%x failed (error=%i)\n",
159                      addr, ret);
160                 return ret;
161         }
162         ret = dev->em28xx_read_reg_req_len(dev, 0x0, 0x3, buf, len);
163         if (ret < 0) {
164                 em28xx_warn("reading from i2c device at 0x%x failed (error=%i)",
165                             addr, ret);
166                 return ret;
167         }
168         return ret;
169 }
170
171 /*
172  * em28xx_i2c_send_bytes()
173  * untested for more than 4 bytes
174  */
175 static int em28xx_i2c_send_bytes(void *data, unsigned char addr, char *buf,
176                                  short len, int stop)
177 {
178         int wrcount = 0;
179         struct em28xx *dev = (struct em28xx *)data;
180
181         wrcount = dev->em28xx_write_regs_req(dev, stop ? 2 : 3, addr, buf, len);
182
183         return wrcount;
184 }
185
186 /*
187  * em28xx_i2c_recv_bytes()
188  * read a byte from the i2c device
189  */
190 static int em28xx_i2c_recv_bytes(struct em28xx *dev, unsigned char addr,
191                                  char *buf, int len)
192 {
193         int ret;
194         ret = dev->em28xx_read_reg_req_len(dev, 2, addr, buf, len);
195         if (ret < 0) {
196                 em28xx_warn("reading i2c device failed (error=%i)\n", ret);
197                 return ret;
198         }
199         if (dev->em28xx_read_reg(dev, 0x5) != 0)
200                 return -ENODEV;
201         return ret;
202 }
203
204 /*
205  * em28xx_i2c_check_for_device()
206  * check if there is a i2c_device at the supplied address
207  */
208 static int em28xx_i2c_check_for_device(struct em28xx *dev, unsigned char addr)
209 {
210         char msg;
211         int ret;
212         msg = addr;
213
214         ret = dev->em28xx_read_reg_req(dev, 2, addr);
215         if (ret < 0) {
216                 em28xx_warn("reading from i2c device failed (error=%i)\n", ret);
217                 return ret;
218         }
219         if (dev->em28xx_read_reg(dev, 0x5) != 0)
220                 return -ENODEV;
221         return 0;
222 }
223
224 /*
225  * em28xx_i2c_xfer()
226  * the main i2c transfer function
227  */
228 static int em28xx_i2c_xfer(struct i2c_adapter *i2c_adap,
229                            struct i2c_msg msgs[], int num)
230 {
231         struct em28xx *dev = i2c_adap->algo_data;
232         int addr, rc, i, byte;
233
234         if (num <= 0)
235                 return 0;
236         for (i = 0; i < num; i++) {
237                 addr = msgs[i].addr << 1;
238                 dprintk2(2,"%s %s addr=%x len=%d:",
239                          (msgs[i].flags & I2C_M_RD) ? "read" : "write",
240                          i == num - 1 ? "stop" : "nonstop", addr, msgs[i].len);
241                 if (!msgs[i].len) {     /* no len: check only for device presence */
242                         if (dev->is_em2800)
243                                 rc = em2800_i2c_check_for_device(dev, addr);
244                         else
245                                 rc = em28xx_i2c_check_for_device(dev, addr);
246                         if (rc < 0) {
247                                 dprintk2(2," no device\n");
248                                 return rc;
249                         }
250
251                 } else if (msgs[i].flags & I2C_M_RD) {
252                         /* read bytes */
253                         if (dev->is_em2800)
254                                 rc = em2800_i2c_recv_bytes(dev, addr,
255                                                            msgs[i].buf,
256                                                            msgs[i].len);
257                         else
258                                 rc = em28xx_i2c_recv_bytes(dev, addr,
259                                                            msgs[i].buf,
260                                                            msgs[i].len);
261                         if (i2c_debug>=2) {
262                                 for (byte = 0; byte < msgs[i].len; byte++) {
263                                         printk(" %02x", msgs[i].buf[byte]);
264                                 }
265                         }
266                 } else {
267                         /* write bytes */
268                         if (i2c_debug>=2) {
269                                 for (byte = 0; byte < msgs[i].len; byte++)
270                                         printk(" %02x", msgs[i].buf[byte]);
271                         }
272                         if (dev->is_em2800)
273                                 rc = em2800_i2c_send_bytes(dev, addr,
274                                                            msgs[i].buf,
275                                                            msgs[i].len);
276                         else
277                                 rc = em28xx_i2c_send_bytes(dev, addr,
278                                                            msgs[i].buf,
279                                                            msgs[i].len,
280                                                            i == num - 1);
281                 }
282                 if (rc < 0)
283                         goto err;
284                 if (i2c_debug>=2)
285                         printk("\n");
286         }
287
288         return num;
289       err:
290         dprintk2(2," ERROR: %i\n", rc);
291         return rc;
292 }
293
294 static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned char *eedata, int len)
295 {
296         unsigned char buf, *p = eedata;
297         struct em28xx_eeprom *em_eeprom = (void *)eedata;
298         int i, err, size = len, block;
299
300         dev->i2c_client.addr = 0xa0 >> 1;
301
302         /* Check if board has eeprom */
303         err = i2c_master_recv(&dev->i2c_client, &buf, 0);
304         if (err < 0)
305                 return -1;
306
307         buf = 0;
308         if (1 != (err = i2c_master_send(&dev->i2c_client, &buf, 1))) {
309                 printk(KERN_INFO "%s: Huh, no eeprom present (err=%d)?\n",
310                        dev->name, err);
311                 return -1;
312         }
313         while (size > 0) {
314                 if (size > 16)
315                         block = 16;
316                 else
317                         block = size;
318
319                 if (block !=
320                     (err = i2c_master_recv(&dev->i2c_client, p, block))) {
321                         printk(KERN_WARNING
322                                "%s: i2c eeprom read error (err=%d)\n",
323                                dev->name, err);
324                         return -1;
325                 }
326                 size -= block;
327                 p += block;
328         }
329         for (i = 0; i < len; i++) {
330                 if (0 == (i % 16))
331                         printk(KERN_INFO "%s: i2c eeprom %02x:", dev->name, i);
332                 printk(" %02x", eedata[i]);
333                 if (15 == (i % 16))
334                         printk("\n");
335         }
336
337         printk(KERN_INFO "EEPROM ID= 0x%08x\n", em_eeprom->id);
338         printk(KERN_INFO "Vendor/Product ID= %04x:%04x\n", em_eeprom->vendor_ID,
339                em_eeprom->product_ID);
340
341         switch (em_eeprom->chip_conf >> 4 & 0x3) {
342         case 0:
343                 printk(KERN_INFO "No audio on board.\n");
344                 break;
345         case 1:
346                 printk(KERN_INFO "AC97 audio (5 sample rates)\n");
347                 break;
348         case 2:
349                 printk(KERN_INFO "I2S audio, sample rate=32k\n");
350                 break;
351         case 3:
352                 printk(KERN_INFO "I2S audio, 3 sample rates\n");
353                 break;
354         }
355
356         if (em_eeprom->chip_conf & 1 << 3)
357                 printk(KERN_INFO "USB Remote wakeup capable\n");
358
359         if (em_eeprom->chip_conf & 1 << 2)
360                 printk(KERN_INFO "USB Self power capable\n");
361
362         switch (em_eeprom->chip_conf & 0x3) {
363         case 0:
364                 printk(KERN_INFO "500mA max power\n");
365                 break;
366         case 1:
367                 printk(KERN_INFO "400mA max power\n");
368                 break;
369         case 2:
370                 printk(KERN_INFO "300mA max power\n");
371                 break;
372         case 3:
373                 printk(KERN_INFO "200mA max power\n");
374                 break;
375         }
376         printk(KERN_INFO "Table at 0x%02x, strings=0x%04x, 0x%04x, 0x%04x\n",
377                                 em_eeprom->string_idx_table,em_eeprom->string1,
378                                 em_eeprom->string2,em_eeprom->string3);
379
380         return 0;
381 }
382
383 /* ----------------------------------------------------------- */
384
385 /*
386  * functionality()
387  */
388 static u32 functionality(struct i2c_adapter *adap)
389 {
390         return I2C_FUNC_SMBUS_EMUL;
391 }
392
393
394 static int em28xx_set_tuner(int check_eeprom, struct i2c_client *client)
395 {
396         struct em28xx *dev = client->adapter->algo_data;
397         struct tuner_setup tun_setup;
398
399         if (dev->has_tuner) {
400                 tun_setup.mode_mask = T_ANALOG_TV | T_RADIO;
401                 tun_setup.type = dev->tuner_type;
402                 tun_setup.addr = dev->tuner_addr;
403                 em28xx_i2c_call_clients(dev, TUNER_SET_TYPE_ADDR, &tun_setup);
404         }
405
406         return (0);
407 }
408
409 /*
410  * attach_inform()
411  * gets called when a device attaches to the i2c bus
412  * does some basic configuration
413  */
414 static int attach_inform(struct i2c_client *client)
415 {
416         struct em28xx *dev = client->adapter->algo_data;
417
418         switch (client->addr << 1) {
419                 case 0x43:
420                 case 0x4b:
421                 {
422                         struct tuner_setup tun_setup;
423
424                         tun_setup.mode_mask = T_ANALOG_TV | T_RADIO;
425                         tun_setup.type = TUNER_TDA9887;
426                         tun_setup.addr = client->addr;
427
428                         em28xx_i2c_call_clients(dev, TUNER_SET_TYPE_ADDR, &tun_setup);
429                         em28xx_i2c_call_clients(dev, TDA9887_SET_CONFIG, &dev->tda9887_conf);
430                         break;
431                 }
432                 case 0x42:
433                         dprintk1(1,"attach_inform: saa7114 detected.\n");
434                         break;
435                 case 0x4a:
436                         dprintk1(1,"attach_inform: saa7113 detected.\n");
437                         break;
438                 case 0xa0:
439                         dprintk1(1,"attach_inform: eeprom detected.\n");
440                         break;
441                 case 0x60:
442                 case 0x8e:
443                 {
444                         struct IR_i2c *ir = i2c_get_clientdata(client);
445                         dprintk1(1,"attach_inform: IR detected (%s).\n",ir->phys);
446                         em28xx_set_ir(dev,ir);
447                         break;
448                 }
449                 case 0x80:
450                 case 0x88:
451                         dprintk1(1,"attach_inform: msp34xx detected.\n");
452                         break;
453                 case 0xb8:
454                 case 0xba:
455                         dprintk1(1,"attach_inform: tvp5150 detected.\n");
456                         break;
457
458                 default:
459                         dprintk1(1,"attach inform: detected I2C address %x\n", client->addr << 1);
460                         dev->tuner_addr = client->addr;
461                         em28xx_set_tuner(-1, client);
462         }
463
464         return 0;
465 }
466
467 static struct i2c_algorithm em28xx_algo = {
468         .master_xfer   = em28xx_i2c_xfer,
469         .functionality = functionality,
470 };
471
472 static struct i2c_adapter em28xx_adap_template = {
473         .owner = THIS_MODULE,
474         .class = I2C_CLASS_TV_ANALOG,
475         .name = "em28xx",
476         .id = I2C_HW_B_EM28XX,
477         .algo = &em28xx_algo,
478         .client_register = attach_inform,
479 };
480
481 static struct i2c_client em28xx_client_template = {
482         .name = "em28xx internal",
483 };
484
485 /* ----------------------------------------------------------- */
486
487 /*
488  * i2c_devs
489  * incomplete list of known devices
490  */
491 static char *i2c_devs[128] = {
492         [0x4a >> 1] = "saa7113h",
493         [0x60 >> 1] = "remote IR sensor",
494         [0x8e >> 1] = "remote IR sensor",
495         [0x86 >> 1] = "tda9887",
496         [0x80 >> 1] = "msp34xx",
497         [0x88 >> 1] = "msp34xx",
498         [0xa0 >> 1] = "eeprom",
499         [0xb8 >> 1] = "tvp5150a",
500         [0xba >> 1] = "tvp5150a",
501         [0xc0 >> 1] = "tuner (analog)",
502         [0xc2 >> 1] = "tuner (analog)",
503         [0xc4 >> 1] = "tuner (analog)",
504         [0xc6 >> 1] = "tuner (analog)",
505 };
506
507 /*
508  * do_i2c_scan()
509  * check i2c address range for devices
510  */
511 static void do_i2c_scan(char *name, struct i2c_client *c)
512 {
513         unsigned char buf;
514         int i, rc;
515
516         for (i = 0; i < ARRAY_SIZE(i2c_devs); i++) {
517                 c->addr = i;
518                 rc = i2c_master_recv(c, &buf, 0);
519                 if (rc < 0)
520                         continue;
521                 printk(KERN_INFO "%s: found i2c device @ 0x%x [%s]\n", name,
522                        i << 1, i2c_devs[i] ? i2c_devs[i] : "???");
523         }
524 }
525
526 /*
527  * em28xx_i2c_call_clients()
528  * send commands to all attached i2c devices
529  */
530 void em28xx_i2c_call_clients(struct em28xx *dev, unsigned int cmd, void *arg)
531 {
532         BUG_ON(NULL == dev->i2c_adap.algo_data);
533         i2c_clients_command(&dev->i2c_adap, cmd, arg);
534 }
535
536 /*
537  * em28xx_i2c_register()
538  * register i2c bus
539  */
540 int em28xx_i2c_register(struct em28xx *dev)
541 {
542         BUG_ON(!dev->em28xx_write_regs || !dev->em28xx_read_reg);
543         BUG_ON(!dev->em28xx_write_regs_req || !dev->em28xx_read_reg_req);
544         dev->i2c_adap = em28xx_adap_template;
545         dev->i2c_adap.dev.parent = &dev->udev->dev;
546         strcpy(dev->i2c_adap.name, dev->name);
547         dev->i2c_adap.algo_data = dev;
548         i2c_add_adapter(&dev->i2c_adap);
549
550         dev->i2c_client = em28xx_client_template;
551         dev->i2c_client.adapter = &dev->i2c_adap;
552
553         em28xx_i2c_eeprom(dev, dev->eedata, sizeof(dev->eedata));
554
555         if (i2c_scan)
556                 do_i2c_scan(dev->name, &dev->i2c_client);
557         return 0;
558 }
559
560 /*
561  * em28xx_i2c_unregister()
562  * unregister i2c_bus
563  */
564 int em28xx_i2c_unregister(struct em28xx *dev)
565 {
566         i2c_del_adapter(&dev->i2c_adap);
567         return 0;
568 }