2 * $Id: cx88-cards.c,v 1.66 2005/03/04 09:12:23 kraxel Exp $
4 * device driver for Conexant 2388x based TV cards
7 * (c) 2003 Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation; either version 2 of the License, or
12 * (at your option) any later version.
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
24 #include <linux/init.h>
25 #include <linux/module.h>
26 #include <linux/pci.h>
27 #include <linux/delay.h>
31 /* ------------------------------------------------------------------ */
32 /* board config info */
34 struct cx88_board cx88_boards[] = {
35 [CX88_BOARD_UNKNOWN] = {
36 .name = "UNKNOWN/GENERIC",
39 .type = CX88_VMUX_COMPOSITE1,
42 .type = CX88_VMUX_COMPOSITE2,
45 .type = CX88_VMUX_COMPOSITE3,
48 .type = CX88_VMUX_COMPOSITE4,
52 [CX88_BOARD_HAUPPAUGE] = {
53 .name = "Hauppauge WinTV 34xxx models",
55 .tda9887_conf = TDA9887_PRESENT,
57 .type = CX88_VMUX_TELEVISION,
59 .gpio0 = 0xff00, // internal decoder
61 .type = CX88_VMUX_DEBUG,
63 .gpio0 = 0xff01, // mono from tuner chip
65 .type = CX88_VMUX_COMPOSITE1,
69 .type = CX88_VMUX_SVIDEO,
79 .name = "GDI Black Gold",
82 .type = CX88_VMUX_TELEVISION,
86 [CX88_BOARD_PIXELVIEW] = {
90 .type = CX88_VMUX_TELEVISION,
92 .gpio0 = 0xff00, // internal decoder
94 .type = CX88_VMUX_COMPOSITE1,
97 .type = CX88_VMUX_SVIDEO,
105 [CX88_BOARD_ATI_WONDER_PRO] = {
106 .name = "ATI TV Wonder Pro",
108 .tda9887_conf = TDA9887_PRESENT | TDA9887_INTERCARRIER,
110 .type = CX88_VMUX_TELEVISION,
114 .type = CX88_VMUX_COMPOSITE1,
118 .type = CX88_VMUX_SVIDEO,
123 [CX88_BOARD_WINFAST2000XP_EXPERT] = {
124 .name = "Leadtek Winfast 2000XP Expert",
126 .tda9887_conf = TDA9887_PRESENT,
128 .type = CX88_VMUX_TELEVISION,
135 .type = CX88_VMUX_COMPOSITE1,
142 .type = CX88_VMUX_SVIDEO,
157 [CX88_BOARD_AVERTV_303] = {
158 .name = "AverTV Studio 303 (M126)",
160 .tda9887_conf = TDA9887_PRESENT,
162 .type = CX88_VMUX_TELEVISION,
166 .type = CX88_VMUX_COMPOSITE1,
170 .type = CX88_VMUX_SVIDEO,
178 [CX88_BOARD_MSI_TVANYWHERE_MASTER] = {
179 // added gpio values thanks to Michal
180 // values for PAL from DScaler
181 .name = "MSI TV-@nywhere Master",
183 .tda9887_conf = TDA9887_PRESENT,
185 .type = CX88_VMUX_TELEVISION,
191 .type = CX88_VMUX_COMPOSITE1,
197 .type = CX88_VMUX_SVIDEO,
207 [CX88_BOARD_WINFAST_DV2000] = {
208 .name = "Leadtek Winfast DV2000",
210 .tda9887_conf = TDA9887_PRESENT,
212 .type = CX88_VMUX_TELEVISION,
220 .type = CX88_VMUX_COMPOSITE1,
227 .type = CX88_VMUX_SVIDEO,
242 [CX88_BOARD_LEADTEK_PVR2000] = {
243 // gpio values for PAL version from regspy by DScaler
244 .name = "Leadtek PVR 2000",
246 .tda9887_conf = TDA9887_PRESENT,
248 .type = CX88_VMUX_TELEVISION,
252 .type = CX88_VMUX_COMPOSITE1,
256 .type = CX88_VMUX_SVIDEO,
266 [CX88_BOARD_IODATA_GVVCP3PCI] = {
267 .name = "IODATA GV-VCP3/PCI",
268 .tuner_type = TUNER_ABSENT,
270 .type = CX88_VMUX_COMPOSITE1,
273 .type = CX88_VMUX_COMPOSITE2,
276 .type = CX88_VMUX_SVIDEO,
280 [CX88_BOARD_PROLINK_PLAYTVPVR] = {
281 .name = "Prolink PlayTV PVR",
283 .tda9887_conf = TDA9887_PRESENT,
285 .type = CX88_VMUX_TELEVISION,
289 .type = CX88_VMUX_COMPOSITE1,
293 .type = CX88_VMUX_SVIDEO,
302 [CX88_BOARD_ASUS_PVR_416] = {
303 .name = "ASUS PVR-416",
305 .tda9887_conf = TDA9887_PRESENT,
307 .type = CX88_VMUX_TELEVISION,
311 .type = CX88_VMUX_SVIDEO,
313 .gpio0 = 0x0000fde6, // 0x0000fda6 L,R RCA audio in?
321 [CX88_BOARD_MSI_TVANYWHERE] = {
322 .name = "MSI TV-@nywhere",
324 .tda9887_conf = TDA9887_PRESENT,
326 .type = CX88_VMUX_TELEVISION,
331 .type = CX88_VMUX_COMPOSITE1,
336 .type = CX88_VMUX_SVIDEO,
342 [CX88_BOARD_KWORLD_DVB_T] = {
343 .name = "KWorld/VStream XPert DVB-T",
344 .tuner_type = TUNER_ABSENT,
346 .type = CX88_VMUX_COMPOSITE1,
351 .type = CX88_VMUX_SVIDEO,
358 [CX88_BOARD_DVICO_FUSIONHDTV_DVB_T1] = {
359 .name = "DVICO FusionHDTV DVB-T1",
360 .tuner_type = TUNER_ABSENT, /* No analog tuner */
362 .type = CX88_VMUX_COMPOSITE1,
366 .type = CX88_VMUX_SVIDEO,
372 [CX88_BOARD_KWORLD_LTV883] = {
373 .name = "KWorld LTV883RF",
376 .type = CX88_VMUX_TELEVISION,
380 .type = CX88_VMUX_DEBUG,
382 .gpio0 = 0x07f9, // mono from tuner chip
384 .type = CX88_VMUX_COMPOSITE1,
388 .type = CX88_VMUX_SVIDEO,
397 [CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD] = {
398 .name = "DViCO - FusionHDTV 3 Gold",
399 .tuner_type = TUNER_MICROTUNE_4042FI5,
401 GPIO[0] resets DT3302 DTV receiver
404 GPIO[1] mutes analog audio output connector
405 0 - enable selected source
407 GPIO[2] selects source for analog audio output connector
408 0 - analog audio input connector on tab
409 1 - analog DAC output from CX23881 chip
410 GPIO[3] selects RF input connector on tuner module
411 0 - RF connector labeled CABLE
412 1 - RF connector labeled ANT
415 .type = CX88_VMUX_TELEVISION,
419 .type = CX88_VMUX_CABLE,
423 .type = CX88_VMUX_COMPOSITE1,
427 .type = CX88_VMUX_SVIDEO,
434 .gpio0 = 0x00000f01, /* Hooked to tuner reset bit */
438 [CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_Q] = {
439 .name = "DViCO - FusionHDTV 3 Gold-Q",
440 .tuner_type = 52, /* Thomson DDT 7610 ATSC/NTSC - Its actually a 7611 chip, but this works */
442 .type = CX88_VMUX_TELEVISION,
446 .type = CX88_VMUX_CABLE,
450 .type = CX88_VMUX_COMPOSITE1,
454 .type = CX88_VMUX_SVIDEO,
461 .gpio0 = 0x00000f01, /* Hooked to tuner reset bit */
465 [CX88_BOARD_HAUPPAUGE_DVB_T1] = {
466 .name = "Hauppauge Nova-T DVB-T",
467 .tuner_type = TUNER_ABSENT,
469 .type = CX88_VMUX_DVB,
474 [CX88_BOARD_CONEXANT_DVB_T1] = {
475 .name = "Conexant DVB-T reference design",
476 .tuner_type = TUNER_ABSENT,
478 .type = CX88_VMUX_DVB,
483 [CX88_BOARD_PROVIDEO_PV259] = {
484 .name = "Provideo PV259",
485 .tuner_type = TUNER_PHILIPS_FQ1216ME,
487 .type = CX88_VMUX_TELEVISION,
492 [CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PLUS] = {
493 .name = "DVICO FusionHDTV DVB-T Plus",
494 .tuner_type = TUNER_ABSENT, /* No analog tuner */
496 .type = CX88_VMUX_COMPOSITE1,
500 .type = CX88_VMUX_SVIDEO,
506 [CX88_BOARD_DNTV_LIVE_DVB_T] = {
507 .name = "digitalnow DNTV Live! DVB-T",
508 .tuner_type = TUNER_ABSENT,
510 .type = CX88_VMUX_COMPOSITE1,
515 .type = CX88_VMUX_SVIDEO,
522 [CX88_BOARD_PCHDTV_HD3000] = {
523 .name = "pcHDTV HD3000 HDTV",
524 .tuner_type = TUNER_THOMSON_DTT7610,
526 .type = CX88_VMUX_TELEVISION,
533 .type = CX88_VMUX_COMPOSITE1,
540 .type = CX88_VMUX_SVIDEO,
557 [CX88_BOARD_HAUPPAUGE_ROSLYN] = {
558 // entry added by Kaustubh D. Bhalerao <bhalerao.1@osu.edu>
559 // GPIO values obtained from regspy, courtesy Sean Covel
560 .name = "Hauppauge WinTV 28xxx (Roslyn) models",
563 .type = CX88_VMUX_TELEVISION,
565 .gpio0 = 0xed12, // internal decoder
568 .type = CX88_VMUX_DEBUG,
570 .gpio0 = 0xff01, // mono from tuner chip
572 .type = CX88_VMUX_COMPOSITE1,
576 .type = CX88_VMUX_SVIDEO,
588 [CX88_BOARD_DIGITALLOGIC_MEC] = {
589 /* params copied over from Leadtek PVR 2000 */
590 .name = "Digital-Logic MICROSPACE Entertainment Center (MEC)",
591 /* not sure yet about the tuner type */
593 .tda9887_conf = TDA9887_PRESENT,
595 .type = CX88_VMUX_TELEVISION,
599 .type = CX88_VMUX_COMPOSITE1,
603 .type = CX88_VMUX_SVIDEO,
613 [CX88_BOARD_IODATA_GVBCTV7E] = {
614 .name = "IODATA GV/BCTV7E",
615 .tuner_type = TUNER_PHILIPS_FQ1286,
616 .tda9887_conf = TDA9887_PRESENT,
618 .type = CX88_VMUX_TELEVISION,
622 .type = CX88_VMUX_COMPOSITE1,
626 .type = CX88_VMUX_SVIDEO,
631 [CX88_BOARD_PIXELVIEW_PLAYTV_ULTRA_PRO] = {
632 .name = "PixelView PlayTV Ultra Pro (Stereo)",
635 .type = CX88_VMUX_TELEVISION,
637 .gpio0 = 0xbf61, // internal decoder
639 .type = CX88_VMUX_COMPOSITE1,
643 .type = CX88_VMUX_SVIDEO,
653 const unsigned int cx88_bcount = ARRAY_SIZE(cx88_boards);
655 /* ------------------------------------------------------------------ */
656 /* PCI subsystem IDs */
658 struct cx88_subid cx88_subids[] = {
662 .card = CX88_BOARD_HAUPPAUGE,
666 .card = CX88_BOARD_HAUPPAUGE,
670 .card = CX88_BOARD_GDI,
673 .subdevice = 0x0107, /* with mpeg encoder */
674 .card = CX88_BOARD_GDI,
676 .subvendor = PCI_VENDOR_ID_ATI,
678 .card = CX88_BOARD_ATI_WONDER_PRO,
682 .card = CX88_BOARD_WINFAST2000XP_EXPERT,
685 .subdevice = 0x6613, /* NTSC */
686 .card = CX88_BOARD_WINFAST2000XP_EXPERT,
690 .card = CX88_BOARD_WINFAST_DV2000,
694 .card = CX88_BOARD_LEADTEK_PVR2000,
698 .card = CX88_BOARD_LEADTEK_PVR2000,
702 .card = CX88_BOARD_AVERTV_303,
706 .card = CX88_BOARD_MSI_TVANYWHERE_MASTER,
710 .card = CX88_BOARD_IODATA_GVVCP3PCI,
713 .subdevice = 0x4823, /* with mpeg encoder */
714 .card = CX88_BOARD_ASUS_PVR_416,
718 .card = CX88_BOARD_KWORLD_DVB_T,
722 .card = CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD,
726 .card = CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_Q,
730 .card = CX88_BOARD_DVICO_FUSIONHDTV_DVB_T1,
734 .card = CX88_BOARD_HAUPPAUGE_DVB_T1,
738 .card = CX88_BOARD_CONEXANT_DVB_T1,
742 .card = CX88_BOARD_PROVIDEO_PV259,
746 .card = CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PLUS,
750 .card = CX88_BOARD_PIXELVIEW,
753 .subdevice = 0x3000, /* HD-3000 card */
754 .card = CX88_BOARD_PCHDTV_HD3000,
758 .card = CX88_BOARD_DNTV_LIVE_DVB_T,
762 .card = CX88_BOARD_HAUPPAUGE_ROSLYN,
766 .card = CX88_BOARD_DIGITALLOGIC_MEC,
770 .card = CX88_BOARD_IODATA_GVBCTV7E,
773 const unsigned int cx88_idcount = ARRAY_SIZE(cx88_subids);
775 /* ----------------------------------------------------------------------- */
776 /* some leadtek specific stuff */
778 static void __devinit leadtek_eeprom(struct cx88_core *core, u8 *eeprom_data)
780 /* This is just for the "Winfast 2000XP Expert" board ATM; I don't have data on
783 * Byte 0 is 1 on the NTSC board.
786 if (eeprom_data[4] != 0x7d ||
787 eeprom_data[5] != 0x10 ||
788 eeprom_data[7] != 0x66) {
789 printk(KERN_WARNING "%s: Leadtek eeprom invalid.\n",
795 core->tuner_type = (eeprom_data[6] == 0x13) ? 43 : 38;
797 printk(KERN_INFO "%s: Leadtek Winfast 2000XP Expert config: "
798 "tuner=%d, eeprom[0]=0x%02x\n",
799 core->name, core->tuner_type, eeprom_data[0]);
803 /* ----------------------------------------------------------------------- */
805 static void hauppauge_eeprom(struct cx88_core *core, u8 *eeprom_data)
809 tveeprom_hauppauge_analog(&tv, eeprom_data);
810 core->tuner_type = tv.tuner_type;
811 core->has_radio = tv.has_radio;
814 static int hauppauge_eeprom_dvb(struct cx88_core *core, u8 *ee)
819 /* Make sure we support the board model */
820 model = ee[0x1f] << 24 | ee[0x1e] << 16 | ee[0x1d] << 8 | ee[0x1c];
828 printk("%s: warning: unknown hauppauge model #%d\n",
833 /* Make sure we support the tuner */
836 case 0x4B: /* dtt 7595 */
837 case 0x4C: /* dtt 7592 */
840 printk("%s: error: unknown hauppauge tuner 0x%02x\n",
844 printk(KERN_INFO "%s: hauppauge eeprom: model=%d, tuner=%d\n",
845 core->name, model, tuner);
849 /* ----------------------------------------------------------------------- */
850 /* some GDI (was: Modular Technology) specific stuff */
857 [ 0x01 ] = { .id = TUNER_ABSENT,
859 [ 0x02 ] = { .id = TUNER_ABSENT,
861 [ 0x03 ] = { .id = TUNER_ABSENT,
863 [ 0x04 ] = { .id = TUNER_ABSENT,
865 [ 0x05 ] = { .id = TUNER_ABSENT,
868 [ 0x10 ] = { .id = TUNER_ABSENT,
870 .name = "TEMIC_4049" },
871 [ 0x11 ] = { .id = TUNER_TEMIC_4136FY5,
872 .name = "TEMIC_4136" },
873 [ 0x12 ] = { .id = TUNER_ABSENT,
874 .name = "TEMIC_4146" },
876 [ 0x20 ] = { .id = TUNER_PHILIPS_FQ1216ME,
878 .name = "PHILIPS_FQ1216_MK3" },
879 [ 0x21 ] = { .id = TUNER_ABSENT, .fm = 1,
880 .name = "PHILIPS_FQ1236_MK3" },
881 [ 0x22 ] = { .id = TUNER_ABSENT,
882 .name = "PHILIPS_FI1236_MK3" },
883 [ 0x23 ] = { .id = TUNER_ABSENT,
884 .name = "PHILIPS_FI1216_MK3" },
887 static void gdi_eeprom(struct cx88_core *core, u8 *eeprom_data)
889 char *name = (eeprom_data[0x0d] < ARRAY_SIZE(gdi_tuner))
890 ? gdi_tuner[eeprom_data[0x0d]].name : NULL;
892 printk(KERN_INFO "%s: GDI: tuner=%s\n", core->name,
893 name ? name : "unknown");
896 core->tuner_type = gdi_tuner[eeprom_data[0x0d]].id;
897 core->has_radio = gdi_tuner[eeprom_data[0x0d]].fm;
900 /* ----------------------------------------------------------------------- */
902 void cx88_card_list(struct cx88_core *core, struct pci_dev *pci)
906 if (0 == pci->subsystem_vendor &&
907 0 == pci->subsystem_device) {
908 printk("%s: Your board has no valid PCI Subsystem ID and thus can't\n"
909 "%s: be autodetected. Please pass card=<n> insmod option to\n"
910 "%s: workaround that. Redirect complaints to the vendor of\n"
911 "%s: the TV card. Best regards,\n"
913 core->name,core->name,core->name,core->name,core->name);
915 printk("%s: Your board isn't known (yet) to the driver. You can\n"
916 "%s: try to pick one of the existing card configs via\n"
917 "%s: card=<n> insmod option. Updating to the latest\n"
918 "%s: version might help as well.\n",
919 core->name,core->name,core->name,core->name);
921 printk("%s: Here is a list of valid choices for the card=<n> insmod option:\n",
923 for (i = 0; i < cx88_bcount; i++)
924 printk("%s: card=%d -> %s\n",
925 core->name, i, cx88_boards[i].name);
928 void cx88_card_setup(struct cx88_core *core)
930 static u8 eeprom[128];
932 if (0 == core->i2c_rc) {
933 core->i2c_client.addr = 0xa0 >> 1;
934 tveeprom_read(&core->i2c_client,eeprom,sizeof(eeprom));
937 switch (core->board) {
938 case CX88_BOARD_HAUPPAUGE:
939 case CX88_BOARD_HAUPPAUGE_ROSLYN:
940 if (0 == core->i2c_rc)
941 hauppauge_eeprom(core,eeprom+8);
944 if (0 == core->i2c_rc)
945 gdi_eeprom(core,eeprom);
947 case CX88_BOARD_WINFAST2000XP_EXPERT:
948 if (0 == core->i2c_rc)
949 leadtek_eeprom(core,eeprom);
951 case CX88_BOARD_HAUPPAUGE_DVB_T1:
952 if (0 == core->i2c_rc)
953 hauppauge_eeprom_dvb(core,eeprom);
955 case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T1:
956 case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PLUS:
957 /* GPIO0:0 is hooked to mt352 reset pin */
958 cx_set(MO_GP0_IO, 0x00000101);
959 cx_clear(MO_GP0_IO, 0x00000001);
961 cx_set(MO_GP0_IO, 0x00000101);
963 case CX88_BOARD_KWORLD_DVB_T:
964 case CX88_BOARD_DNTV_LIVE_DVB_T:
965 cx_set(MO_GP0_IO, 0x00000707);
966 cx_set(MO_GP2_IO, 0x00000101);
967 cx_clear(MO_GP2_IO, 0x00000001);
969 cx_clear(MO_GP0_IO, 0x00000007);
970 cx_set(MO_GP2_IO, 0x00000101);
973 if (cx88_boards[core->board].radio.type == CX88_RADIO)
977 /* ------------------------------------------------------------------ */
979 EXPORT_SYMBOL(cx88_boards);
980 EXPORT_SYMBOL(cx88_bcount);
981 EXPORT_SYMBOL(cx88_subids);
982 EXPORT_SYMBOL(cx88_idcount);
983 EXPORT_SYMBOL(cx88_card_list);
984 EXPORT_SYMBOL(cx88_card_setup);