V4L/DVB (7827): cx23885: add missing subsystem ID for Hauppauge HVR-1200 OEM
[linux-2.6.git] / drivers / media / video / cx23885 / cx23885-cards.c
1 /*
2  *  Driver for the Conexant CX23885 PCIe bridge
3  *
4  *  Copyright (c) 2006 Steven Toth <stoth@hauppauge.com>
5  *
6  *  This program is free software; you can redistribute it and/or modify
7  *  it under the terms of the GNU General Public License as published by
8  *  the Free Software Foundation; either version 2 of the License, or
9  *  (at your option) any later version.
10  *
11  *  This program is distributed in the hope that it will be useful,
12  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
13  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
14  *
15  *  GNU General Public License for more details.
16  *
17  *  You should have received a copy of the GNU General Public License
18  *  along with this program; if not, write to the Free Software
19  *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
20  */
21
22 #include <linux/init.h>
23 #include <linux/module.h>
24 #include <linux/pci.h>
25 #include <linux/delay.h>
26 #include <media/cx25840.h>
27
28 #include "cx23885.h"
29
30 /* ------------------------------------------------------------------ */
31 /* board config info                                                  */
32
33 struct cx23885_board cx23885_boards[] = {
34         [CX23885_BOARD_UNKNOWN] = {
35                 .name           = "UNKNOWN/GENERIC",
36                 /* Ensure safe default for unknown boards */
37                 .clk_freq       = 0,
38                 .input          = {{
39                         .type   = CX23885_VMUX_COMPOSITE1,
40                         .vmux   = 0,
41                 },{
42                         .type   = CX23885_VMUX_COMPOSITE2,
43                         .vmux   = 1,
44                 },{
45                         .type   = CX23885_VMUX_COMPOSITE3,
46                         .vmux   = 2,
47                 },{
48                         .type   = CX23885_VMUX_COMPOSITE4,
49                         .vmux   = 3,
50                 }},
51         },
52         [CX23885_BOARD_HAUPPAUGE_HVR1800lp] = {
53                 .name           = "Hauppauge WinTV-HVR1800lp",
54                 .portc          = CX23885_MPEG_DVB,
55                 .input          = {{
56                         .type   = CX23885_VMUX_TELEVISION,
57                         .vmux   = 0,
58                         .gpio0  = 0xff00,
59                 },{
60                         .type   = CX23885_VMUX_DEBUG,
61                         .vmux   = 0,
62                         .gpio0  = 0xff01,
63                 },{
64                         .type   = CX23885_VMUX_COMPOSITE1,
65                         .vmux   = 1,
66                         .gpio0  = 0xff02,
67                 },{
68                         .type   = CX23885_VMUX_SVIDEO,
69                         .vmux   = 2,
70                         .gpio0  = 0xff02,
71                 }},
72         },
73         [CX23885_BOARD_HAUPPAUGE_HVR1800] = {
74                 .name           = "Hauppauge WinTV-HVR1800",
75                 .porta          = CX23885_ANALOG_VIDEO,
76                 .portb          = CX23885_MPEG_ENCODER,
77                 .portc          = CX23885_MPEG_DVB,
78                 .tuner_type     = TUNER_PHILIPS_TDA8290,
79                 .tuner_addr     = 0x42, /* 0x84 >> 1 */
80                 .input          = {{
81                         .type   = CX23885_VMUX_TELEVISION,
82                         .vmux   =       CX25840_VIN7_CH3 |
83                                         CX25840_VIN5_CH2 |
84                                         CX25840_VIN2_CH1,
85                         .gpio0  = 0,
86                 },{
87                         .type   = CX23885_VMUX_COMPOSITE1,
88                         .vmux   =       CX25840_VIN7_CH3 |
89                                         CX25840_VIN4_CH2 |
90                                         CX25840_VIN6_CH1,
91                         .gpio0  = 0,
92                 },{
93                         .type   = CX23885_VMUX_SVIDEO,
94                         .vmux   =       CX25840_VIN7_CH3 |
95                                         CX25840_VIN4_CH2 |
96                                         CX25840_VIN8_CH1 |
97                                         CX25840_SVIDEO_ON,
98                         .gpio0  = 0,
99                 }},
100         },
101         [CX23885_BOARD_HAUPPAUGE_HVR1250] = {
102                 .name           = "Hauppauge WinTV-HVR1250",
103                 .portc          = CX23885_MPEG_DVB,
104                 .input          = {{
105                         .type   = CX23885_VMUX_TELEVISION,
106                         .vmux   = 0,
107                         .gpio0  = 0xff00,
108                 },{
109                         .type   = CX23885_VMUX_DEBUG,
110                         .vmux   = 0,
111                         .gpio0  = 0xff01,
112                 },{
113                         .type   = CX23885_VMUX_COMPOSITE1,
114                         .vmux   = 1,
115                         .gpio0  = 0xff02,
116                 },{
117                         .type   = CX23885_VMUX_SVIDEO,
118                         .vmux   = 2,
119                         .gpio0  = 0xff02,
120                 }},
121         },
122         [CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP] = {
123                 .name           = "DViCO FusionHDTV5 Express",
124                 .portb          = CX23885_MPEG_DVB,
125         },
126         [CX23885_BOARD_HAUPPAUGE_HVR1500Q] = {
127                 .name           = "Hauppauge WinTV-HVR1500Q",
128                 .portc          = CX23885_MPEG_DVB,
129         },
130         [CX23885_BOARD_HAUPPAUGE_HVR1500] = {
131                 .name           = "Hauppauge WinTV-HVR1500",
132                 .portc          = CX23885_MPEG_DVB,
133         },
134         [CX23885_BOARD_HAUPPAUGE_HVR1200] = {
135                 .name           = "Hauppauge WinTV-HVR1200",
136                 .portc          = CX23885_MPEG_DVB,
137         },
138         [CX23885_BOARD_HAUPPAUGE_HVR1700] = {
139                 .name           = "Hauppauge WinTV-HVR1700",
140                 .portc          = CX23885_MPEG_DVB,
141         },
142         [CX23885_BOARD_HAUPPAUGE_HVR1400] = {
143                 .name           = "Hauppauge WinTV-HVR1400",
144                 .portc          = CX23885_MPEG_DVB,
145         },
146 };
147 const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
148
149 /* ------------------------------------------------------------------ */
150 /* PCI subsystem IDs                                                  */
151
152 struct cx23885_subid cx23885_subids[] = {
153         {
154                 .subvendor = 0x0070,
155                 .subdevice = 0x3400,
156                 .card      = CX23885_BOARD_UNKNOWN,
157         },{
158                 .subvendor = 0x0070,
159                 .subdevice = 0x7600,
160                 .card      = CX23885_BOARD_HAUPPAUGE_HVR1800lp,
161         },{
162                 .subvendor = 0x0070,
163                 .subdevice = 0x7800,
164                 .card      = CX23885_BOARD_HAUPPAUGE_HVR1800,
165         },{
166                 .subvendor = 0x0070,
167                 .subdevice = 0x7801,
168                 .card      = CX23885_BOARD_HAUPPAUGE_HVR1800,
169         },{
170                 .subvendor = 0x0070,
171                 .subdevice = 0x7809,
172                 .card      = CX23885_BOARD_HAUPPAUGE_HVR1800,
173         },{
174                 .subvendor = 0x0070,
175                 .subdevice = 0x7911,
176                 .card      = CX23885_BOARD_HAUPPAUGE_HVR1250,
177         },{
178                 .subvendor = 0x18ac,
179                 .subdevice = 0xd500,
180                 .card      = CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP,
181         },{
182                 .subvendor = 0x0070,
183                 .subdevice = 0x7790,
184                 .card      = CX23885_BOARD_HAUPPAUGE_HVR1500Q,
185         },{
186                 .subvendor = 0x0070,
187                 .subdevice = 0x7797,
188                 .card      = CX23885_BOARD_HAUPPAUGE_HVR1500Q,
189         },{
190                 .subvendor = 0x0070,
191                 .subdevice = 0x7710,
192                 .card      = CX23885_BOARD_HAUPPAUGE_HVR1500,
193         },{
194                 .subvendor = 0x0070,
195                 .subdevice = 0x7717,
196                 .card      = CX23885_BOARD_HAUPPAUGE_HVR1500,
197         }, {
198                 .subvendor = 0x0070,
199                 .subdevice = 0x71d1,
200                 .card      = CX23885_BOARD_HAUPPAUGE_HVR1200,
201         }, {
202                 .subvendor = 0x0070,
203                 .subdevice = 0x71d3,
204                 .card      = CX23885_BOARD_HAUPPAUGE_HVR1200,
205         }, {
206                 .subvendor = 0x0070,
207                 .subdevice = 0x8101,
208                 .card      = CX23885_BOARD_HAUPPAUGE_HVR1700,
209         }, {
210                 .subvendor = 0x0070,
211                 .subdevice = 0x8010,
212                 .card      = CX23885_BOARD_HAUPPAUGE_HVR1400,
213         },
214 };
215 const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);
216
217 void cx23885_card_list(struct cx23885_dev *dev)
218 {
219         int i;
220
221         if (0 == dev->pci->subsystem_vendor &&
222             0 == dev->pci->subsystem_device) {
223                 printk("%s: Your board has no valid PCIe Subsystem ID and thus can't\n"
224                        "%s: be autodetected.  Please pass card=<n> insmod option to\n"
225                        "%s: workaround that.  Redirect complaints to the vendor of\n"
226                        "%s: the TV card.  Best regards,\n"
227                        "%s:         -- tux\n",
228                        dev->name, dev->name, dev->name, dev->name, dev->name);
229         } else {
230                 printk("%s: Your board isn't known (yet) to the driver.  You can\n"
231                        "%s: try to pick one of the existing card configs via\n"
232                        "%s: card=<n> insmod option.  Updating to the latest\n"
233                        "%s: version might help as well.\n",
234                        dev->name, dev->name, dev->name, dev->name);
235         }
236         printk("%s: Here is a list of valid choices for the card=<n> insmod option:\n",
237                dev->name);
238         for (i = 0; i < cx23885_bcount; i++)
239                 printk("%s:    card=%d -> %s\n",
240                        dev->name, i, cx23885_boards[i].name);
241 }
242
243 static void hauppauge_eeprom(struct cx23885_dev *dev, u8 *eeprom_data)
244 {
245         struct tveeprom tv;
246
247         tveeprom_hauppauge_analog(&dev->i2c_bus[0].i2c_client, &tv, eeprom_data);
248
249         /* Make sure we support the board model */
250         switch (tv.model)
251         {
252         case 76601: /* WinTV-HVR1800lp (PCIe, Retail, No IR, Dual channel ATSC and MPEG2 HW Encoder */
253         case 77001: /* WinTV-HVR1500 (Express Card, OEM, No IR, ATSC and Basic analog */
254         case 77011: /* WinTV-HVR1500 (Express Card, Retail, No IR, ATSC and Basic analog */
255         case 77041: /* WinTV-HVR1500Q (Express Card, OEM, No IR, ATSC/QAM and Basic analog */
256         case 77051: /* WinTV-HVR1500Q (Express Card, Retail, No IR, ATSC/QAM and Basic analog */
257         case 78011: /* WinTV-HVR1800 (PCIe, Retail, 3.5mm in, IR, No FM, Dual channel ATSC and MPEG2 HW Encoder */
258         case 78501: /* WinTV-HVR1800 (PCIe, OEM, RCA in, No IR, FM, Dual channel ATSC and MPEG2 HW Encoder */
259         case 78521: /* WinTV-HVR1800 (PCIe, OEM, RCA in, No IR, FM, Dual channel ATSC and MPEG2 HW Encoder */
260         case 78531: /* WinTV-HVR1800 (PCIe, OEM, RCA in, No IR, No FM, Dual channel ATSC and MPEG2 HW Encoder */
261         case 78631: /* WinTV-HVR1800 (PCIe, OEM, No IR, No FM, Dual channel ATSC and MPEG2 HW Encoder */
262         case 79001: /* WinTV-HVR1250 (PCIe, Retail, IR, full height, ATSC and Basic analog */
263         case 79101: /* WinTV-HVR1250 (PCIe, Retail, IR, half height, ATSC and Basic analog */
264         case 79561: /* WinTV-HVR1250 (PCIe, OEM, No IR, half height, ATSC and Basic analog */
265         case 79571: /* WinTV-HVR1250 (PCIe, OEM, No IR, full height, ATSC and Basic analog */
266         case 79671: /* WinTV-HVR1250 (PCIe, OEM, No IR, half height, ATSC and Basic analog */
267         case 80019:
268                 /* WinTV-HVR1400 (Express Card, Retail, IR,
269                  * DVB-T and Basic analog */
270         case 81519:
271                 /* WinTV-HVR1700 (PCIe, Retail, No IR, half height,
272                  * DVB-T and MPEG2 HW Encoder */
273                 break;
274         default:
275                 printk("%s: warning: unknown hauppauge model #%d\n", dev->name, tv.model);
276                 break;
277         }
278
279         printk(KERN_INFO "%s: hauppauge eeprom: model=%d\n",
280                         dev->name, tv.model);
281 }
282
283 /* Tuner callback function for cx23885 boards. Currently only needed
284  * for HVR1500Q, which has an xc5000 tuner.
285  */
286 int cx23885_tuner_callback(void *priv, int command, int arg)
287 {
288         struct cx23885_i2c *bus = priv;
289         struct cx23885_dev *dev = bus->dev;
290
291         switch(dev->board) {
292         case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
293                 if(command == 0) {      /* Tuner Reset Command from xc5000 */
294                         /* Drive the tuner into reset and out */
295                         cx_clear(GP0_IO, 0x00000004);
296                         mdelay(200);
297                         cx_set(GP0_IO, 0x00000004);
298                         return 0;
299                 }
300                 else {
301                         printk(KERN_ERR
302                                 "%s(): Unknow command.\n", __func__);
303                         return -EINVAL;
304                 }
305                 break;
306         }
307
308         return 0; /* Should never be here */
309 }
310
311 void cx23885_gpio_setup(struct cx23885_dev *dev)
312 {
313         switch(dev->board) {
314         case CX23885_BOARD_HAUPPAUGE_HVR1250:
315                 /* GPIO-0 cx24227 demodulator reset */
316                 cx_set(GP0_IO, 0x00010001); /* Bring the part out of reset */
317                 break;
318         case CX23885_BOARD_HAUPPAUGE_HVR1500:
319                 /* GPIO-0 cx24227 demodulator */
320                 /* GPIO-2 xc3028 tuner */
321
322                 /* Put the parts into reset */
323                 cx_set(GP0_IO, 0x00050000);
324                 cx_clear(GP0_IO, 0x00000005);
325                 msleep(5);
326
327                 /* Bring the parts out of reset */
328                 cx_set(GP0_IO, 0x00050005);
329                 break;
330         case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
331                 /* GPIO-0 cx24227 demodulator reset */
332                 /* GPIO-2 xc5000 tuner reset */
333                 cx_set(GP0_IO, 0x00050005); /* Bring the part out of reset */
334                 break;
335         case CX23885_BOARD_HAUPPAUGE_HVR1800:
336                 /* GPIO-0 656_CLK */
337                 /* GPIO-1 656_D0 */
338                 /* GPIO-2 8295A Reset */
339                 /* GPIO-3-10 cx23417 data0-7 */
340                 /* GPIO-11-14 cx23417 addr0-3 */
341                 /* GPIO-15-18 cx23417 READY, CS, RD, WR */
342                 /* GPIO-19 IR_RX */
343
344                 /* CX23417 GPIO's */
345                 /* EIO15 Zilog Reset */
346                 /* EIO14 S5H1409/CX24227 Reset */
347
348                 /* Force the TDA8295A into reset and back */
349                 cx_set(GP0_IO, 0x00040004);
350                 mdelay(20);
351                 cx_clear(GP0_IO, 0x00000004);
352                 mdelay(20);
353                 cx_set(GP0_IO, 0x00040004);
354                 mdelay(20);
355                 break;
356         case CX23885_BOARD_HAUPPAUGE_HVR1200:
357                 /* GPIO-0 tda10048 demodulator reset */
358                 /* GPIO-2 tda18271 tuner reset */
359
360                 /* Put the parts into reset and back */
361                 cx_set(GP0_IO, 0x00050000);
362                 mdelay(20);
363                 cx_clear(GP0_IO, 0x00000005);
364                 mdelay(20);
365                 cx_set(GP0_IO, 0x00050005);
366                 break;
367         case CX23885_BOARD_HAUPPAUGE_HVR1700:
368                 /* GPIO-0 TDA10048 demodulator reset */
369                 /* GPIO-2 TDA8295A Reset */
370                 /* GPIO-3-10 cx23417 data0-7 */
371                 /* GPIO-11-14 cx23417 addr0-3 */
372                 /* GPIO-15-18 cx23417 READY, CS, RD, WR */
373
374                 /* The following GPIO's are on the interna AVCore (cx25840) */
375                 /* GPIO-19 IR_RX */
376                 /* GPIO-20 IR_TX 416/DVBT Select */
377                 /* GPIO-21 IIS DAT */
378                 /* GPIO-22 IIS WCLK */
379                 /* GPIO-23 IIS BCLK */
380
381                 /* Put the parts into reset and back */
382                 cx_set(GP0_IO, 0x00050000);
383                 mdelay(20);
384                 cx_clear(GP0_IO, 0x00000005);
385                 mdelay(20);
386                 cx_set(GP0_IO, 0x00050005);
387                 break;
388         case CX23885_BOARD_HAUPPAUGE_HVR1400:
389                 /* GPIO-0  Dibcom7000p demodulator reset */
390                 /* GPIO-2  xc3028L tuner reset */
391                 /* GPIO-13 LED */
392
393                 /* Put the parts into reset and back */
394                 cx_set(GP0_IO, 0x00050000);
395                 mdelay(20);
396                 cx_clear(GP0_IO, 0x00000005);
397                 mdelay(20);
398                 cx_set(GP0_IO, 0x00050005);
399                 break;
400         }
401 }
402
403 int cx23885_ir_init(struct cx23885_dev *dev)
404 {
405         switch (dev->board) {
406         case CX23885_BOARD_HAUPPAUGE_HVR1250:
407         case CX23885_BOARD_HAUPPAUGE_HVR1500:
408         case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
409         case CX23885_BOARD_HAUPPAUGE_HVR1800:
410         case CX23885_BOARD_HAUPPAUGE_HVR1200:
411         case CX23885_BOARD_HAUPPAUGE_HVR1400:
412                 /* FIXME: Implement me */
413                 break;
414         }
415
416         return 0;
417 }
418
419 void cx23885_card_setup(struct cx23885_dev *dev)
420 {
421         struct cx23885_tsport *ts1 = &dev->ts1;
422         struct cx23885_tsport *ts2 = &dev->ts2;
423
424         static u8 eeprom[256];
425
426         if (dev->i2c_bus[0].i2c_rc == 0) {
427                 dev->i2c_bus[0].i2c_client.addr = 0xa0 >> 1;
428                 tveeprom_read(&dev->i2c_bus[0].i2c_client,
429                               eeprom, sizeof(eeprom));
430         }
431
432         switch (dev->board) {
433         case CX23885_BOARD_HAUPPAUGE_HVR1250:
434         case CX23885_BOARD_HAUPPAUGE_HVR1500:
435         case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
436         case CX23885_BOARD_HAUPPAUGE_HVR1400:
437                 if (dev->i2c_bus[0].i2c_rc == 0)
438                         hauppauge_eeprom(dev, eeprom+0x80);
439                 break;
440         case CX23885_BOARD_HAUPPAUGE_HVR1800:
441         case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
442         case CX23885_BOARD_HAUPPAUGE_HVR1200:
443         case CX23885_BOARD_HAUPPAUGE_HVR1700:
444                 if (dev->i2c_bus[0].i2c_rc == 0)
445                         hauppauge_eeprom(dev, eeprom+0xc0);
446                 break;
447         }
448
449         switch (dev->board) {
450         case CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP:
451                 ts1->gen_ctrl_val  = 0xc; /* Serial bus + punctured clock */
452                 ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
453                 ts1->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
454                 break;
455         case CX23885_BOARD_HAUPPAUGE_HVR1800:
456                 /* Defaults for VID B - Analog encoder */
457                 /* DREQ_POL, SMODE, PUNC_CLK, MCLK_POL Serial bus + punc clk */
458                 ts1->gen_ctrl_val    = 0x10e;
459                 ts1->ts_clk_en_val   = 0x1; /* Enable TS_CLK */
460                 ts1->src_sel_val     = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
461
462                 /* APB_TSVALERR_POL (active low)*/
463                 ts1->vld_misc_val    = 0x2000;
464                 ts1->hw_sop_ctrl_val = (0x47 << 16 | 188 << 4 | 0xc);
465
466                 /* Defaults for VID C */
467                 ts2->gen_ctrl_val  = 0xc; /* Serial bus + punctured clock */
468                 ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
469                 ts2->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
470                 break;
471         case CX23885_BOARD_HAUPPAUGE_HVR1250:
472         case CX23885_BOARD_HAUPPAUGE_HVR1500:
473         case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
474         case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
475         case CX23885_BOARD_HAUPPAUGE_HVR1200:
476         case CX23885_BOARD_HAUPPAUGE_HVR1700:
477         case CX23885_BOARD_HAUPPAUGE_HVR1400:
478         default:
479                 ts2->gen_ctrl_val  = 0xc; /* Serial bus + punctured clock */
480                 ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
481                 ts2->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
482         }
483
484         /* Certain boards support analog, or require the avcore to be
485          * loaded, ensure this happens.
486          */
487         switch (dev->board) {
488         case CX23885_BOARD_HAUPPAUGE_HVR1800:
489         case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
490         case CX23885_BOARD_HAUPPAUGE_HVR1700:
491                 request_module("cx25840");
492                 break;
493         }
494 }
495
496 /* ------------------------------------------------------------------ */
497
498 /*
499  * Local variables:
500  * c-basic-offset: 8
501  * End:
502  * kate: eol "unix"; indent-width 3; remove-trailing-space on; replace-trailing-space-save on; tab-width 8; replace-tabs off; space-indent off; mixed-indent off
503  */