]> nv-tegra.nvidia Code Review - linux-2.6.git/blob - drivers/ide/cmd64x.c
pdc202xx_old: fix 'pdc20246_dma_ops'
[linux-2.6.git] / drivers / ide / cmd64x.c
1 /*
2  * cmd64x.c: Enable interrupts at initialization time on Ultra/PCI machines.
3  *           Due to massive hardware bugs, UltraDMA is only supported
4  *           on the 646U2 and not on the 646U.
5  *
6  * Copyright (C) 1998           Eddie C. Dost  (ecd@skynet.be)
7  * Copyright (C) 1998           David S. Miller (davem@redhat.com)
8  *
9  * Copyright (C) 1999-2002      Andre Hedrick <andre@linux-ide.org>
10  * Copyright (C) 2007           MontaVista Software, Inc. <source@mvista.com>
11  */
12
13 #include <linux/module.h>
14 #include <linux/types.h>
15 #include <linux/pci.h>
16 #include <linux/ide.h>
17 #include <linux/init.h>
18
19 #include <asm/io.h>
20
21 #define DRV_NAME "cmd64x"
22
23 #define CMD_DEBUG 0
24
25 #if CMD_DEBUG
26 #define cmdprintk(x...) printk(x)
27 #else
28 #define cmdprintk(x...)
29 #endif
30
31 /*
32  * CMD64x specific registers definition.
33  */
34 #define CFR             0x50
35 #define   CFR_INTR_CH0          0x04
36
37 #define CMDTIM          0x52
38 #define ARTTIM0         0x53
39 #define DRWTIM0         0x54
40 #define ARTTIM1         0x55
41 #define DRWTIM1         0x56
42 #define ARTTIM23        0x57
43 #define   ARTTIM23_DIS_RA2      0x04
44 #define   ARTTIM23_DIS_RA3      0x08
45 #define   ARTTIM23_INTR_CH1     0x10
46 #define DRWTIM2         0x58
47 #define BRST            0x59
48 #define DRWTIM3         0x5b
49
50 #define BMIDECR0        0x70
51 #define MRDMODE         0x71
52 #define   MRDMODE_INTR_CH0      0x04
53 #define   MRDMODE_INTR_CH1      0x08
54 #define UDIDETCR0       0x73
55 #define DTPR0           0x74
56 #define BMIDECR1        0x78
57 #define BMIDECSR        0x79
58 #define UDIDETCR1       0x7B
59 #define DTPR1           0x7C
60
61 static u8 quantize_timing(int timing, int quant)
62 {
63         return (timing + quant - 1) / quant;
64 }
65
66 /*
67  * This routine calculates active/recovery counts and then writes them into
68  * the chipset registers.
69  */
70 static void program_cycle_times (ide_drive_t *drive, int cycle_time, int active_time)
71 {
72         struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
73         int clock_time = 1000 / (ide_pci_clk ? ide_pci_clk : 33);
74         u8  cycle_count, active_count, recovery_count, drwtim;
75         static const u8 recovery_values[] =
76                 {15, 15, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 0};
77         static const u8 drwtim_regs[4] = {DRWTIM0, DRWTIM1, DRWTIM2, DRWTIM3};
78
79         cmdprintk("program_cycle_times parameters: total=%d, active=%d\n",
80                   cycle_time, active_time);
81
82         cycle_count     = quantize_timing( cycle_time, clock_time);
83         active_count    = quantize_timing(active_time, clock_time);
84         recovery_count  = cycle_count - active_count;
85
86         /*
87          * In case we've got too long recovery phase, try to lengthen
88          * the active phase
89          */
90         if (recovery_count > 16) {
91                 active_count += recovery_count - 16;
92                 recovery_count = 16;
93         }
94         if (active_count > 16)          /* shouldn't actually happen... */
95                 active_count = 16;
96
97         cmdprintk("Final counts: total=%d, active=%d, recovery=%d\n",
98                   cycle_count, active_count, recovery_count);
99
100         /*
101          * Convert values to internal chipset representation
102          */
103         recovery_count = recovery_values[recovery_count];
104         active_count  &= 0x0f;
105
106         /* Program the active/recovery counts into the DRWTIM register */
107         drwtim = (active_count << 4) | recovery_count;
108         (void) pci_write_config_byte(dev, drwtim_regs[drive->dn], drwtim);
109         cmdprintk("Write 0x%02x to reg 0x%x\n", drwtim, drwtim_regs[drive->dn]);
110 }
111
112 /*
113  * This routine writes into the chipset registers
114  * PIO setup/active/recovery timings.
115  */
116 static void cmd64x_tune_pio(ide_drive_t *drive, const u8 pio)
117 {
118         ide_hwif_t *hwif        = drive->hwif;
119         struct pci_dev *dev     = to_pci_dev(hwif->dev);
120         struct ide_timing *t    = ide_timing_find_mode(XFER_PIO_0 + pio);
121         unsigned int cycle_time;
122         u8 setup_count, arttim = 0;
123
124         static const u8 setup_values[] = {0x40, 0x40, 0x40, 0x80, 0, 0xc0};
125         static const u8 arttim_regs[4] = {ARTTIM0, ARTTIM1, ARTTIM23, ARTTIM23};
126
127         cycle_time = ide_pio_cycle_time(drive, pio);
128
129         program_cycle_times(drive, cycle_time, t->active);
130
131         setup_count = quantize_timing(t->setup,
132                         1000 / (ide_pci_clk ? ide_pci_clk : 33));
133
134         /*
135          * The primary channel has individual address setup timing registers
136          * for each drive and the hardware selects the slowest timing itself.
137          * The secondary channel has one common register and we have to select
138          * the slowest address setup timing ourselves.
139          */
140         if (hwif->channel) {
141                 ide_drive_t *pair = ide_get_pair_dev(drive);
142
143                 drive->drive_data = setup_count;
144
145                 if (pair)
146                         setup_count = max_t(u8, setup_count, pair->drive_data);
147         }
148
149         if (setup_count > 5)            /* shouldn't actually happen... */
150                 setup_count = 5;
151         cmdprintk("Final address setup count: %d\n", setup_count);
152
153         /*
154          * Program the address setup clocks into the ARTTIM registers.
155          * Avoid clearing the secondary channel's interrupt bit.
156          */
157         (void) pci_read_config_byte (dev, arttim_regs[drive->dn], &arttim);
158         if (hwif->channel)
159                 arttim &= ~ARTTIM23_INTR_CH1;
160         arttim &= ~0xc0;
161         arttim |= setup_values[setup_count];
162         (void) pci_write_config_byte(dev, arttim_regs[drive->dn], arttim);
163         cmdprintk("Write 0x%02x to reg 0x%x\n", arttim, arttim_regs[drive->dn]);
164 }
165
166 /*
167  * Attempts to set drive's PIO mode.
168  * Special cases are 8: prefetch off, 9: prefetch on (both never worked)
169  */
170
171 static void cmd64x_set_pio_mode(ide_drive_t *drive, const u8 pio)
172 {
173         /*
174          * Filter out the prefetch control values
175          * to prevent PIO5 from being programmed
176          */
177         if (pio == 8 || pio == 9)
178                 return;
179
180         cmd64x_tune_pio(drive, pio);
181 }
182
183 static void cmd64x_set_dma_mode(ide_drive_t *drive, const u8 speed)
184 {
185         ide_hwif_t *hwif        = drive->hwif;
186         struct pci_dev *dev     = to_pci_dev(hwif->dev);
187         u8 unit                 = drive->dn & 0x01;
188         u8 regU = 0, pciU       = hwif->channel ? UDIDETCR1 : UDIDETCR0;
189
190         if (speed >= XFER_SW_DMA_0) {
191                 (void) pci_read_config_byte(dev, pciU, &regU);
192                 regU &= ~(unit ? 0xCA : 0x35);
193         }
194
195         switch(speed) {
196         case XFER_UDMA_5:
197                 regU |= unit ? 0x0A : 0x05;
198                 break;
199         case XFER_UDMA_4:
200                 regU |= unit ? 0x4A : 0x15;
201                 break;
202         case XFER_UDMA_3:
203                 regU |= unit ? 0x8A : 0x25;
204                 break;
205         case XFER_UDMA_2:
206                 regU |= unit ? 0x42 : 0x11;
207                 break;
208         case XFER_UDMA_1:
209                 regU |= unit ? 0x82 : 0x21;
210                 break;
211         case XFER_UDMA_0:
212                 regU |= unit ? 0xC2 : 0x31;
213                 break;
214         case XFER_MW_DMA_2:
215                 program_cycle_times(drive, 120, 70);
216                 break;
217         case XFER_MW_DMA_1:
218                 program_cycle_times(drive, 150, 80);
219                 break;
220         case XFER_MW_DMA_0:
221                 program_cycle_times(drive, 480, 215);
222                 break;
223         }
224
225         if (speed >= XFER_SW_DMA_0)
226                 (void) pci_write_config_byte(dev, pciU, regU);
227 }
228
229 static int cmd648_dma_end(ide_drive_t *drive)
230 {
231         ide_hwif_t *hwif        = drive->hwif;
232         unsigned long base      = hwif->dma_base - (hwif->channel * 8);
233         int err                 = ide_dma_end(drive);
234         u8  irq_mask            = hwif->channel ? MRDMODE_INTR_CH1 :
235                                                   MRDMODE_INTR_CH0;
236         u8  mrdmode             = inb(base + 1);
237
238         /* clear the interrupt bit */
239         outb((mrdmode & ~(MRDMODE_INTR_CH0 | MRDMODE_INTR_CH1)) | irq_mask,
240              base + 1);
241
242         return err;
243 }
244
245 static int cmd64x_dma_end(ide_drive_t *drive)
246 {
247         ide_hwif_t *hwif        = drive->hwif;
248         struct pci_dev *dev     = to_pci_dev(hwif->dev);
249         int irq_reg             = hwif->channel ? ARTTIM23 : CFR;
250         u8  irq_mask            = hwif->channel ? ARTTIM23_INTR_CH1 :
251                                                   CFR_INTR_CH0;
252         u8  irq_stat            = 0;
253         int err                 = ide_dma_end(drive);
254
255         (void) pci_read_config_byte(dev, irq_reg, &irq_stat);
256         /* clear the interrupt bit */
257         (void) pci_write_config_byte(dev, irq_reg, irq_stat | irq_mask);
258
259         return err;
260 }
261
262 static int cmd648_dma_test_irq(ide_drive_t *drive)
263 {
264         ide_hwif_t *hwif        = drive->hwif;
265         unsigned long base      = hwif->dma_base - (hwif->channel * 8);
266         u8 irq_mask             = hwif->channel ? MRDMODE_INTR_CH1 :
267                                                   MRDMODE_INTR_CH0;
268         u8 dma_stat             = inb(hwif->dma_base + ATA_DMA_STATUS);
269         u8 mrdmode              = inb(base + 1);
270
271 #ifdef DEBUG
272         printk("%s: dma_stat: 0x%02x mrdmode: 0x%02x irq_mask: 0x%02x\n",
273                drive->name, dma_stat, mrdmode, irq_mask);
274 #endif
275         if (!(mrdmode & irq_mask))
276                 return 0;
277
278         /* return 1 if INTR asserted */
279         if (dma_stat & 4)
280                 return 1;
281
282         return 0;
283 }
284
285 static int cmd64x_dma_test_irq(ide_drive_t *drive)
286 {
287         ide_hwif_t *hwif        = drive->hwif;
288         struct pci_dev *dev     = to_pci_dev(hwif->dev);
289         int irq_reg             = hwif->channel ? ARTTIM23 : CFR;
290         u8  irq_mask            = hwif->channel ? ARTTIM23_INTR_CH1 :
291                                                   CFR_INTR_CH0;
292         u8  dma_stat            = inb(hwif->dma_base + ATA_DMA_STATUS);
293         u8  irq_stat            = 0;
294
295         (void) pci_read_config_byte(dev, irq_reg, &irq_stat);
296
297 #ifdef DEBUG
298         printk("%s: dma_stat: 0x%02x irq_stat: 0x%02x irq_mask: 0x%02x\n",
299                drive->name, dma_stat, irq_stat, irq_mask);
300 #endif
301         if (!(irq_stat & irq_mask))
302                 return 0;
303
304         /* return 1 if INTR asserted */
305         if (dma_stat & 4)
306                 return 1;
307
308         return 0;
309 }
310
311 /*
312  * ASUS P55T2P4D with CMD646 chipset revision 0x01 requires the old
313  * event order for DMA transfers.
314  */
315
316 static int cmd646_1_dma_end(ide_drive_t *drive)
317 {
318         ide_hwif_t *hwif = drive->hwif;
319         u8 dma_stat = 0, dma_cmd = 0;
320
321         /* get DMA status */
322         dma_stat = inb(hwif->dma_base + ATA_DMA_STATUS);
323         /* read DMA command state */
324         dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD);
325         /* stop DMA */
326         outb(dma_cmd & ~1, hwif->dma_base + ATA_DMA_CMD);
327         /* clear the INTR & ERROR bits */
328         outb(dma_stat | 6, hwif->dma_base + ATA_DMA_STATUS);
329         /* verify good DMA status */
330         return (dma_stat & 7) != 4;
331 }
332
333 static int init_chipset_cmd64x(struct pci_dev *dev)
334 {
335         u8 mrdmode = 0;
336
337         /* Set a good latency timer and cache line size value. */
338         (void) pci_write_config_byte(dev, PCI_LATENCY_TIMER, 64);
339         /* FIXME: pci_set_master() to ensure a good latency timer value */
340
341         /*
342          * Enable interrupts, select MEMORY READ LINE for reads.
343          *
344          * NOTE: although not mentioned in the PCI0646U specs,
345          * bits 0-1 are write only and won't be read back as
346          * set or not -- PCI0646U2 specs clarify this point.
347          */
348         (void) pci_read_config_byte (dev, MRDMODE, &mrdmode);
349         mrdmode &= ~0x30;
350         (void) pci_write_config_byte(dev, MRDMODE, (mrdmode | 0x02));
351
352         return 0;
353 }
354
355 static u8 cmd64x_cable_detect(ide_hwif_t *hwif)
356 {
357         struct pci_dev  *dev    = to_pci_dev(hwif->dev);
358         u8 bmidecsr = 0, mask   = hwif->channel ? 0x02 : 0x01;
359
360         switch (dev->device) {
361         case PCI_DEVICE_ID_CMD_648:
362         case PCI_DEVICE_ID_CMD_649:
363                 pci_read_config_byte(dev, BMIDECSR, &bmidecsr);
364                 return (bmidecsr & mask) ? ATA_CBL_PATA80 : ATA_CBL_PATA40;
365         default:
366                 return ATA_CBL_PATA40;
367         }
368 }
369
370 static const struct ide_port_ops cmd64x_port_ops = {
371         .set_pio_mode           = cmd64x_set_pio_mode,
372         .set_dma_mode           = cmd64x_set_dma_mode,
373         .cable_detect           = cmd64x_cable_detect,
374 };
375
376 static const struct ide_dma_ops cmd64x_dma_ops = {
377         .dma_host_set           = ide_dma_host_set,
378         .dma_setup              = ide_dma_setup,
379         .dma_start              = ide_dma_start,
380         .dma_end                = cmd64x_dma_end,
381         .dma_test_irq           = cmd64x_dma_test_irq,
382         .dma_lost_irq           = ide_dma_lost_irq,
383         .dma_timer_expiry       = ide_dma_sff_timer_expiry,
384         .dma_sff_read_status    = ide_dma_sff_read_status,
385 };
386
387 static const struct ide_dma_ops cmd646_rev1_dma_ops = {
388         .dma_host_set           = ide_dma_host_set,
389         .dma_setup              = ide_dma_setup,
390         .dma_start              = ide_dma_start,
391         .dma_end                = cmd646_1_dma_end,
392         .dma_test_irq           = ide_dma_test_irq,
393         .dma_lost_irq           = ide_dma_lost_irq,
394         .dma_timer_expiry       = ide_dma_sff_timer_expiry,
395         .dma_sff_read_status    = ide_dma_sff_read_status,
396 };
397
398 static const struct ide_dma_ops cmd648_dma_ops = {
399         .dma_host_set           = ide_dma_host_set,
400         .dma_setup              = ide_dma_setup,
401         .dma_start              = ide_dma_start,
402         .dma_end                = cmd648_dma_end,
403         .dma_test_irq           = cmd648_dma_test_irq,
404         .dma_lost_irq           = ide_dma_lost_irq,
405         .dma_timer_expiry       = ide_dma_sff_timer_expiry,
406         .dma_sff_read_status    = ide_dma_sff_read_status,
407 };
408
409 static const struct ide_port_info cmd64x_chipsets[] __devinitdata = {
410         {       /* 0: CMD643 */
411                 .name           = DRV_NAME,
412                 .init_chipset   = init_chipset_cmd64x,
413                 .enablebits     = {{0x00,0x00,0x00}, {0x51,0x08,0x08}},
414                 .port_ops       = &cmd64x_port_ops,
415                 .dma_ops        = &cmd64x_dma_ops,
416                 .host_flags     = IDE_HFLAG_CLEAR_SIMPLEX |
417                                   IDE_HFLAG_ABUSE_PREFETCH,
418                 .pio_mask       = ATA_PIO5,
419                 .mwdma_mask     = ATA_MWDMA2,
420                 .udma_mask      = 0x00, /* no udma */
421         },
422         {       /* 1: CMD646 */
423                 .name           = DRV_NAME,
424                 .init_chipset   = init_chipset_cmd64x,
425                 .enablebits     = {{0x51,0x04,0x04}, {0x51,0x08,0x08}},
426                 .port_ops       = &cmd64x_port_ops,
427                 .dma_ops        = &cmd648_dma_ops,
428                 .host_flags     = IDE_HFLAG_SERIALIZE |
429                                   IDE_HFLAG_ABUSE_PREFETCH,
430                 .pio_mask       = ATA_PIO5,
431                 .mwdma_mask     = ATA_MWDMA2,
432                 .udma_mask      = ATA_UDMA2,
433         },
434         {       /* 2: CMD648 */
435                 .name           = DRV_NAME,
436                 .init_chipset   = init_chipset_cmd64x,
437                 .enablebits     = {{0x51,0x04,0x04}, {0x51,0x08,0x08}},
438                 .port_ops       = &cmd64x_port_ops,
439                 .dma_ops        = &cmd648_dma_ops,
440                 .host_flags     = IDE_HFLAG_ABUSE_PREFETCH,
441                 .pio_mask       = ATA_PIO5,
442                 .mwdma_mask     = ATA_MWDMA2,
443                 .udma_mask      = ATA_UDMA4,
444         },
445         {       /* 3: CMD649 */
446                 .name           = DRV_NAME,
447                 .init_chipset   = init_chipset_cmd64x,
448                 .enablebits     = {{0x51,0x04,0x04}, {0x51,0x08,0x08}},
449                 .port_ops       = &cmd64x_port_ops,
450                 .dma_ops        = &cmd648_dma_ops,
451                 .host_flags     = IDE_HFLAG_ABUSE_PREFETCH,
452                 .pio_mask       = ATA_PIO5,
453                 .mwdma_mask     = ATA_MWDMA2,
454                 .udma_mask      = ATA_UDMA5,
455         }
456 };
457
458 static int __devinit cmd64x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
459 {
460         struct ide_port_info d;
461         u8 idx = id->driver_data;
462
463         d = cmd64x_chipsets[idx];
464
465         if (idx == 1) {
466                 /*
467                  * UltraDMA only supported on PCI646U and PCI646U2, which
468                  * correspond to revisions 0x03, 0x05 and 0x07 respectively.
469                  * Actually, although the CMD tech support people won't
470                  * tell me the details, the 0x03 revision cannot support
471                  * UDMA correctly without hardware modifications, and even
472                  * then it only works with Quantum disks due to some
473                  * hold time assumptions in the 646U part which are fixed
474                  * in the 646U2.
475                  *
476                  * So we only do UltraDMA on revision 0x05 and 0x07 chipsets.
477                  */
478                 if (dev->revision < 5) {
479                         d.udma_mask = 0x00;
480                         /*
481                          * The original PCI0646 didn't have the primary
482                          * channel enable bit, it appeared starting with
483                          * PCI0646U (i.e. revision ID 3).
484                          */
485                         if (dev->revision < 3) {
486                                 d.enablebits[0].reg = 0;
487                                 if (dev->revision == 1)
488                                         d.dma_ops = &cmd646_rev1_dma_ops;
489                                 else
490                                         d.dma_ops = &cmd64x_dma_ops;
491                         }
492                 }
493         }
494
495         return ide_pci_init_one(dev, &d, NULL);
496 }
497
498 static const struct pci_device_id cmd64x_pci_tbl[] = {
499         { PCI_VDEVICE(CMD, PCI_DEVICE_ID_CMD_643), 0 },
500         { PCI_VDEVICE(CMD, PCI_DEVICE_ID_CMD_646), 1 },
501         { PCI_VDEVICE(CMD, PCI_DEVICE_ID_CMD_648), 2 },
502         { PCI_VDEVICE(CMD, PCI_DEVICE_ID_CMD_649), 3 },
503         { 0, },
504 };
505 MODULE_DEVICE_TABLE(pci, cmd64x_pci_tbl);
506
507 static struct pci_driver cmd64x_pci_driver = {
508         .name           = "CMD64x_IDE",
509         .id_table       = cmd64x_pci_tbl,
510         .probe          = cmd64x_init_one,
511         .remove         = ide_pci_remove,
512         .suspend        = ide_pci_suspend,
513         .resume         = ide_pci_resume,
514 };
515
516 static int __init cmd64x_ide_init(void)
517 {
518         return ide_pci_register_driver(&cmd64x_pci_driver);
519 }
520
521 static void __exit cmd64x_ide_exit(void)
522 {
523         pci_unregister_driver(&cmd64x_pci_driver);
524 }
525
526 module_init(cmd64x_ide_init);
527 module_exit(cmd64x_ide_exit);
528
529 MODULE_AUTHOR("Eddie Dost, David Miller, Andre Hedrick");
530 MODULE_DESCRIPTION("PCI driver module for CMD64x IDE");
531 MODULE_LICENSE("GPL");