]> nv-tegra.nvidia Code Review - linux-2.6.git/blob - drivers/ata/ahci.c
[libata] convert drivers to use ata.h mode mask defines
[linux-2.6.git] / drivers / ata / ahci.c
1 /*
2  *  ahci.c - AHCI SATA support
3  *
4  *  Maintained by:  Jeff Garzik <jgarzik@pobox.com>
5  *                  Please ALWAYS copy linux-ide@vger.kernel.org
6  *                  on emails.
7  *
8  *  Copyright 2004-2005 Red Hat, Inc.
9  *
10  *
11  *  This program is free software; you can redistribute it and/or modify
12  *  it under the terms of the GNU General Public License as published by
13  *  the Free Software Foundation; either version 2, or (at your option)
14  *  any later version.
15  *
16  *  This program is distributed in the hope that it will be useful,
17  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
18  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
19  *  GNU General Public License for more details.
20  *
21  *  You should have received a copy of the GNU General Public License
22  *  along with this program; see the file COPYING.  If not, write to
23  *  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
24  *
25  *
26  * libata documentation is available via 'make {ps|pdf}docs',
27  * as Documentation/DocBook/libata.*
28  *
29  * AHCI hardware documentation:
30  * http://www.intel.com/technology/serialata/pdf/rev1_0.pdf
31  * http://www.intel.com/technology/serialata/pdf/rev1_1.pdf
32  *
33  */
34
35 #include <linux/kernel.h>
36 #include <linux/module.h>
37 #include <linux/pci.h>
38 #include <linux/init.h>
39 #include <linux/blkdev.h>
40 #include <linux/delay.h>
41 #include <linux/interrupt.h>
42 #include <linux/dma-mapping.h>
43 #include <linux/device.h>
44 #include <linux/dmi.h>
45 #include <scsi/scsi_host.h>
46 #include <scsi/scsi_cmnd.h>
47 #include <linux/libata.h>
48
49 #define DRV_NAME        "ahci"
50 #define DRV_VERSION     "3.0"
51
52 /* Enclosure Management Control */
53 #define EM_CTRL_MSG_TYPE              0x000f0000
54
55 /* Enclosure Management LED Message Type */
56 #define EM_MSG_LED_HBA_PORT           0x0000000f
57 #define EM_MSG_LED_PMP_SLOT           0x0000ff00
58 #define EM_MSG_LED_VALUE              0xffff0000
59 #define EM_MSG_LED_VALUE_ACTIVITY     0x00070000
60 #define EM_MSG_LED_VALUE_OFF          0xfff80000
61 #define EM_MSG_LED_VALUE_ON           0x00010000
62
63 static int ahci_skip_host_reset;
64 static int ahci_ignore_sss;
65
66 module_param_named(skip_host_reset, ahci_skip_host_reset, int, 0444);
67 MODULE_PARM_DESC(skip_host_reset, "skip global host reset (0=don't skip, 1=skip)");
68
69 module_param_named(ignore_sss, ahci_ignore_sss, int, 0444);
70 MODULE_PARM_DESC(ignore_sss, "Ignore staggered spinup flag (0=don't ignore, 1=ignore)");
71
72 static int ahci_enable_alpm(struct ata_port *ap,
73                 enum link_pm policy);
74 static void ahci_disable_alpm(struct ata_port *ap);
75 static ssize_t ahci_led_show(struct ata_port *ap, char *buf);
76 static ssize_t ahci_led_store(struct ata_port *ap, const char *buf,
77                               size_t size);
78 static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state,
79                                         ssize_t size);
80 #define MAX_SLOTS 8
81
82 enum {
83         AHCI_PCI_BAR            = 5,
84         AHCI_MAX_PORTS          = 32,
85         AHCI_MAX_SG             = 168, /* hardware max is 64K */
86         AHCI_DMA_BOUNDARY       = 0xffffffff,
87         AHCI_MAX_CMDS           = 32,
88         AHCI_CMD_SZ             = 32,
89         AHCI_CMD_SLOT_SZ        = AHCI_MAX_CMDS * AHCI_CMD_SZ,
90         AHCI_RX_FIS_SZ          = 256,
91         AHCI_CMD_TBL_CDB        = 0x40,
92         AHCI_CMD_TBL_HDR_SZ     = 0x80,
93         AHCI_CMD_TBL_SZ         = AHCI_CMD_TBL_HDR_SZ + (AHCI_MAX_SG * 16),
94         AHCI_CMD_TBL_AR_SZ      = AHCI_CMD_TBL_SZ * AHCI_MAX_CMDS,
95         AHCI_PORT_PRIV_DMA_SZ   = AHCI_CMD_SLOT_SZ + AHCI_CMD_TBL_AR_SZ +
96                                   AHCI_RX_FIS_SZ,
97         AHCI_IRQ_ON_SG          = (1 << 31),
98         AHCI_CMD_ATAPI          = (1 << 5),
99         AHCI_CMD_WRITE          = (1 << 6),
100         AHCI_CMD_PREFETCH       = (1 << 7),
101         AHCI_CMD_RESET          = (1 << 8),
102         AHCI_CMD_CLR_BUSY       = (1 << 10),
103
104         RX_FIS_D2H_REG          = 0x40, /* offset of D2H Register FIS data */
105         RX_FIS_SDB              = 0x58, /* offset of SDB FIS data */
106         RX_FIS_UNK              = 0x60, /* offset of Unknown FIS data */
107
108         board_ahci              = 0,
109         board_ahci_vt8251       = 1,
110         board_ahci_ign_iferr    = 2,
111         board_ahci_sb600        = 3,
112         board_ahci_mv           = 4,
113         board_ahci_sb700        = 5, /* for SB700 and SB800 */
114         board_ahci_mcp65        = 6,
115         board_ahci_nopmp        = 7,
116
117         /* global controller registers */
118         HOST_CAP                = 0x00, /* host capabilities */
119         HOST_CTL                = 0x04, /* global host control */
120         HOST_IRQ_STAT           = 0x08, /* interrupt status */
121         HOST_PORTS_IMPL         = 0x0c, /* bitmap of implemented ports */
122         HOST_VERSION            = 0x10, /* AHCI spec. version compliancy */
123         HOST_EM_LOC             = 0x1c, /* Enclosure Management location */
124         HOST_EM_CTL             = 0x20, /* Enclosure Management Control */
125
126         /* HOST_CTL bits */
127         HOST_RESET              = (1 << 0),  /* reset controller; self-clear */
128         HOST_IRQ_EN             = (1 << 1),  /* global IRQ enable */
129         HOST_AHCI_EN            = (1 << 31), /* AHCI enabled */
130
131         /* HOST_CAP bits */
132         HOST_CAP_EMS            = (1 << 6),  /* Enclosure Management support */
133         HOST_CAP_SSC            = (1 << 14), /* Slumber capable */
134         HOST_CAP_PMP            = (1 << 17), /* Port Multiplier support */
135         HOST_CAP_CLO            = (1 << 24), /* Command List Override support */
136         HOST_CAP_ALPM           = (1 << 26), /* Aggressive Link PM support */
137         HOST_CAP_SSS            = (1 << 27), /* Staggered Spin-up */
138         HOST_CAP_SNTF           = (1 << 29), /* SNotification register */
139         HOST_CAP_NCQ            = (1 << 30), /* Native Command Queueing */
140         HOST_CAP_64             = (1 << 31), /* PCI DAC (64-bit DMA) support */
141
142         /* registers for each SATA port */
143         PORT_LST_ADDR           = 0x00, /* command list DMA addr */
144         PORT_LST_ADDR_HI        = 0x04, /* command list DMA addr hi */
145         PORT_FIS_ADDR           = 0x08, /* FIS rx buf addr */
146         PORT_FIS_ADDR_HI        = 0x0c, /* FIS rx buf addr hi */
147         PORT_IRQ_STAT           = 0x10, /* interrupt status */
148         PORT_IRQ_MASK           = 0x14, /* interrupt enable/disable mask */
149         PORT_CMD                = 0x18, /* port command */
150         PORT_TFDATA             = 0x20, /* taskfile data */
151         PORT_SIG                = 0x24, /* device TF signature */
152         PORT_CMD_ISSUE          = 0x38, /* command issue */
153         PORT_SCR_STAT           = 0x28, /* SATA phy register: SStatus */
154         PORT_SCR_CTL            = 0x2c, /* SATA phy register: SControl */
155         PORT_SCR_ERR            = 0x30, /* SATA phy register: SError */
156         PORT_SCR_ACT            = 0x34, /* SATA phy register: SActive */
157         PORT_SCR_NTF            = 0x3c, /* SATA phy register: SNotification */
158
159         /* PORT_IRQ_{STAT,MASK} bits */
160         PORT_IRQ_COLD_PRES      = (1 << 31), /* cold presence detect */
161         PORT_IRQ_TF_ERR         = (1 << 30), /* task file error */
162         PORT_IRQ_HBUS_ERR       = (1 << 29), /* host bus fatal error */
163         PORT_IRQ_HBUS_DATA_ERR  = (1 << 28), /* host bus data error */
164         PORT_IRQ_IF_ERR         = (1 << 27), /* interface fatal error */
165         PORT_IRQ_IF_NONFATAL    = (1 << 26), /* interface non-fatal error */
166         PORT_IRQ_OVERFLOW       = (1 << 24), /* xfer exhausted available S/G */
167         PORT_IRQ_BAD_PMP        = (1 << 23), /* incorrect port multiplier */
168
169         PORT_IRQ_PHYRDY         = (1 << 22), /* PhyRdy changed */
170         PORT_IRQ_DEV_ILCK       = (1 << 7), /* device interlock */
171         PORT_IRQ_CONNECT        = (1 << 6), /* port connect change status */
172         PORT_IRQ_SG_DONE        = (1 << 5), /* descriptor processed */
173         PORT_IRQ_UNK_FIS        = (1 << 4), /* unknown FIS rx'd */
174         PORT_IRQ_SDB_FIS        = (1 << 3), /* Set Device Bits FIS rx'd */
175         PORT_IRQ_DMAS_FIS       = (1 << 2), /* DMA Setup FIS rx'd */
176         PORT_IRQ_PIOS_FIS       = (1 << 1), /* PIO Setup FIS rx'd */
177         PORT_IRQ_D2H_REG_FIS    = (1 << 0), /* D2H Register FIS rx'd */
178
179         PORT_IRQ_FREEZE         = PORT_IRQ_HBUS_ERR |
180                                   PORT_IRQ_IF_ERR |
181                                   PORT_IRQ_CONNECT |
182                                   PORT_IRQ_PHYRDY |
183                                   PORT_IRQ_UNK_FIS |
184                                   PORT_IRQ_BAD_PMP,
185         PORT_IRQ_ERROR          = PORT_IRQ_FREEZE |
186                                   PORT_IRQ_TF_ERR |
187                                   PORT_IRQ_HBUS_DATA_ERR,
188         DEF_PORT_IRQ            = PORT_IRQ_ERROR | PORT_IRQ_SG_DONE |
189                                   PORT_IRQ_SDB_FIS | PORT_IRQ_DMAS_FIS |
190                                   PORT_IRQ_PIOS_FIS | PORT_IRQ_D2H_REG_FIS,
191
192         /* PORT_CMD bits */
193         PORT_CMD_ASP            = (1 << 27), /* Aggressive Slumber/Partial */
194         PORT_CMD_ALPE           = (1 << 26), /* Aggressive Link PM enable */
195         PORT_CMD_ATAPI          = (1 << 24), /* Device is ATAPI */
196         PORT_CMD_PMP            = (1 << 17), /* PMP attached */
197         PORT_CMD_LIST_ON        = (1 << 15), /* cmd list DMA engine running */
198         PORT_CMD_FIS_ON         = (1 << 14), /* FIS DMA engine running */
199         PORT_CMD_FIS_RX         = (1 << 4), /* Enable FIS receive DMA engine */
200         PORT_CMD_CLO            = (1 << 3), /* Command list override */
201         PORT_CMD_POWER_ON       = (1 << 2), /* Power up device */
202         PORT_CMD_SPIN_UP        = (1 << 1), /* Spin up device */
203         PORT_CMD_START          = (1 << 0), /* Enable port DMA engine */
204
205         PORT_CMD_ICC_MASK       = (0xf << 28), /* i/f ICC state mask */
206         PORT_CMD_ICC_ACTIVE     = (0x1 << 28), /* Put i/f in active state */
207         PORT_CMD_ICC_PARTIAL    = (0x2 << 28), /* Put i/f in partial state */
208         PORT_CMD_ICC_SLUMBER    = (0x6 << 28), /* Put i/f in slumber state */
209
210         /* hpriv->flags bits */
211         AHCI_HFLAG_NO_NCQ               = (1 << 0),
212         AHCI_HFLAG_IGN_IRQ_IF_ERR       = (1 << 1), /* ignore IRQ_IF_ERR */
213         AHCI_HFLAG_IGN_SERR_INTERNAL    = (1 << 2), /* ignore SERR_INTERNAL */
214         AHCI_HFLAG_32BIT_ONLY           = (1 << 3), /* force 32bit */
215         AHCI_HFLAG_MV_PATA              = (1 << 4), /* PATA port */
216         AHCI_HFLAG_NO_MSI               = (1 << 5), /* no PCI MSI */
217         AHCI_HFLAG_NO_PMP               = (1 << 6), /* no PMP */
218         AHCI_HFLAG_NO_HOTPLUG           = (1 << 7), /* ignore PxSERR.DIAG.N */
219         AHCI_HFLAG_SECT255              = (1 << 8), /* max 255 sectors */
220         AHCI_HFLAG_YES_NCQ              = (1 << 9), /* force NCQ cap on */
221
222         /* ap->flags bits */
223
224         AHCI_FLAG_COMMON                = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
225                                           ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
226                                           ATA_FLAG_ACPI_SATA | ATA_FLAG_AN |
227                                           ATA_FLAG_IPM,
228
229         ICH_MAP                         = 0x90, /* ICH MAP register */
230
231         /* em_ctl bits */
232         EM_CTL_RST                      = (1 << 9), /* Reset */
233         EM_CTL_TM                       = (1 << 8), /* Transmit Message */
234         EM_CTL_ALHD                     = (1 << 26), /* Activity LED */
235 };
236
237 struct ahci_cmd_hdr {
238         __le32                  opts;
239         __le32                  status;
240         __le32                  tbl_addr;
241         __le32                  tbl_addr_hi;
242         __le32                  reserved[4];
243 };
244
245 struct ahci_sg {
246         __le32                  addr;
247         __le32                  addr_hi;
248         __le32                  reserved;
249         __le32                  flags_size;
250 };
251
252 struct ahci_em_priv {
253         enum sw_activity blink_policy;
254         struct timer_list timer;
255         unsigned long saved_activity;
256         unsigned long activity;
257         unsigned long led_state;
258 };
259
260 struct ahci_host_priv {
261         unsigned int            flags;          /* AHCI_HFLAG_* */
262         u32                     cap;            /* cap to use */
263         u32                     port_map;       /* port map to use */
264         u32                     saved_cap;      /* saved initial cap */
265         u32                     saved_port_map; /* saved initial port_map */
266         u32                     em_loc; /* enclosure management location */
267 };
268
269 struct ahci_port_priv {
270         struct ata_link         *active_link;
271         struct ahci_cmd_hdr     *cmd_slot;
272         dma_addr_t              cmd_slot_dma;
273         void                    *cmd_tbl;
274         dma_addr_t              cmd_tbl_dma;
275         void                    *rx_fis;
276         dma_addr_t              rx_fis_dma;
277         /* for NCQ spurious interrupt analysis */
278         unsigned int            ncq_saw_d2h:1;
279         unsigned int            ncq_saw_dmas:1;
280         unsigned int            ncq_saw_sdb:1;
281         u32                     intr_mask;      /* interrupts to enable */
282         struct ahci_em_priv     em_priv[MAX_SLOTS];/* enclosure management info
283                                                  * per PM slot */
284 };
285
286 static int ahci_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val);
287 static int ahci_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val);
288 static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
289 static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc);
290 static bool ahci_qc_fill_rtf(struct ata_queued_cmd *qc);
291 static int ahci_port_start(struct ata_port *ap);
292 static void ahci_port_stop(struct ata_port *ap);
293 static void ahci_qc_prep(struct ata_queued_cmd *qc);
294 static void ahci_freeze(struct ata_port *ap);
295 static void ahci_thaw(struct ata_port *ap);
296 static void ahci_pmp_attach(struct ata_port *ap);
297 static void ahci_pmp_detach(struct ata_port *ap);
298 static int ahci_softreset(struct ata_link *link, unsigned int *class,
299                           unsigned long deadline);
300 static int ahci_sb600_softreset(struct ata_link *link, unsigned int *class,
301                           unsigned long deadline);
302 static int ahci_hardreset(struct ata_link *link, unsigned int *class,
303                           unsigned long deadline);
304 static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class,
305                                  unsigned long deadline);
306 static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class,
307                                 unsigned long deadline);
308 static void ahci_postreset(struct ata_link *link, unsigned int *class);
309 static void ahci_error_handler(struct ata_port *ap);
310 static void ahci_post_internal_cmd(struct ata_queued_cmd *qc);
311 static int ahci_port_resume(struct ata_port *ap);
312 static void ahci_dev_config(struct ata_device *dev);
313 static unsigned int ahci_fill_sg(struct ata_queued_cmd *qc, void *cmd_tbl);
314 static void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag,
315                                u32 opts);
316 #ifdef CONFIG_PM
317 static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg);
318 static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg);
319 static int ahci_pci_device_resume(struct pci_dev *pdev);
320 #endif
321 static ssize_t ahci_activity_show(struct ata_device *dev, char *buf);
322 static ssize_t ahci_activity_store(struct ata_device *dev,
323                                    enum sw_activity val);
324 static void ahci_init_sw_activity(struct ata_link *link);
325
326 static struct device_attribute *ahci_shost_attrs[] = {
327         &dev_attr_link_power_management_policy,
328         &dev_attr_em_message_type,
329         &dev_attr_em_message,
330         NULL
331 };
332
333 static struct device_attribute *ahci_sdev_attrs[] = {
334         &dev_attr_sw_activity,
335         &dev_attr_unload_heads,
336         NULL
337 };
338
339 static struct scsi_host_template ahci_sht = {
340         ATA_NCQ_SHT(DRV_NAME),
341         .can_queue              = AHCI_MAX_CMDS - 1,
342         .sg_tablesize           = AHCI_MAX_SG,
343         .dma_boundary           = AHCI_DMA_BOUNDARY,
344         .shost_attrs            = ahci_shost_attrs,
345         .sdev_attrs             = ahci_sdev_attrs,
346 };
347
348 static struct ata_port_operations ahci_ops = {
349         .inherits               = &sata_pmp_port_ops,
350
351         .qc_defer               = sata_pmp_qc_defer_cmd_switch,
352         .qc_prep                = ahci_qc_prep,
353         .qc_issue               = ahci_qc_issue,
354         .qc_fill_rtf            = ahci_qc_fill_rtf,
355
356         .freeze                 = ahci_freeze,
357         .thaw                   = ahci_thaw,
358         .softreset              = ahci_softreset,
359         .hardreset              = ahci_hardreset,
360         .postreset              = ahci_postreset,
361         .pmp_softreset          = ahci_softreset,
362         .error_handler          = ahci_error_handler,
363         .post_internal_cmd      = ahci_post_internal_cmd,
364         .dev_config             = ahci_dev_config,
365
366         .scr_read               = ahci_scr_read,
367         .scr_write              = ahci_scr_write,
368         .pmp_attach             = ahci_pmp_attach,
369         .pmp_detach             = ahci_pmp_detach,
370
371         .enable_pm              = ahci_enable_alpm,
372         .disable_pm             = ahci_disable_alpm,
373         .em_show                = ahci_led_show,
374         .em_store               = ahci_led_store,
375         .sw_activity_show       = ahci_activity_show,
376         .sw_activity_store      = ahci_activity_store,
377 #ifdef CONFIG_PM
378         .port_suspend           = ahci_port_suspend,
379         .port_resume            = ahci_port_resume,
380 #endif
381         .port_start             = ahci_port_start,
382         .port_stop              = ahci_port_stop,
383 };
384
385 static struct ata_port_operations ahci_vt8251_ops = {
386         .inherits               = &ahci_ops,
387         .hardreset              = ahci_vt8251_hardreset,
388 };
389
390 static struct ata_port_operations ahci_p5wdh_ops = {
391         .inherits               = &ahci_ops,
392         .hardreset              = ahci_p5wdh_hardreset,
393 };
394
395 static struct ata_port_operations ahci_sb600_ops = {
396         .inherits               = &ahci_ops,
397         .softreset              = ahci_sb600_softreset,
398         .pmp_softreset          = ahci_sb600_softreset,
399 };
400
401 #define AHCI_HFLAGS(flags)      .private_data   = (void *)(flags)
402
403 static const struct ata_port_info ahci_port_info[] = {
404         /* board_ahci */
405         {
406                 .flags          = AHCI_FLAG_COMMON,
407                 .pio_mask       = ATA_PIO4,
408                 .udma_mask      = ATA_UDMA6,
409                 .port_ops       = &ahci_ops,
410         },
411         /* board_ahci_vt8251 */
412         {
413                 AHCI_HFLAGS     (AHCI_HFLAG_NO_NCQ | AHCI_HFLAG_NO_PMP),
414                 .flags          = AHCI_FLAG_COMMON,
415                 .pio_mask       = ATA_PIO4,
416                 .udma_mask      = ATA_UDMA6,
417                 .port_ops       = &ahci_vt8251_ops,
418         },
419         /* board_ahci_ign_iferr */
420         {
421                 AHCI_HFLAGS     (AHCI_HFLAG_IGN_IRQ_IF_ERR),
422                 .flags          = AHCI_FLAG_COMMON,
423                 .pio_mask       = ATA_PIO4,
424                 .udma_mask      = ATA_UDMA6,
425                 .port_ops       = &ahci_ops,
426         },
427         /* board_ahci_sb600 */
428         {
429                 AHCI_HFLAGS     (AHCI_HFLAG_IGN_SERR_INTERNAL |
430                                  AHCI_HFLAG_32BIT_ONLY | AHCI_HFLAG_NO_MSI |
431                                  AHCI_HFLAG_SECT255),
432                 .flags          = AHCI_FLAG_COMMON,
433                 .pio_mask       = ATA_PIO4,
434                 .udma_mask      = ATA_UDMA6,
435                 .port_ops       = &ahci_sb600_ops,
436         },
437         /* board_ahci_mv */
438         {
439                 AHCI_HFLAGS     (AHCI_HFLAG_NO_NCQ | AHCI_HFLAG_NO_MSI |
440                                  AHCI_HFLAG_MV_PATA | AHCI_HFLAG_NO_PMP),
441                 .flags          = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
442                                   ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA,
443                 .pio_mask       = ATA_PIO4,
444                 .udma_mask      = ATA_UDMA6,
445                 .port_ops       = &ahci_ops,
446         },
447         /* board_ahci_sb700, for SB700 and SB800 */
448         {
449                 AHCI_HFLAGS     (AHCI_HFLAG_IGN_SERR_INTERNAL),
450                 .flags          = AHCI_FLAG_COMMON,
451                 .pio_mask       = ATA_PIO4,
452                 .udma_mask      = ATA_UDMA6,
453                 .port_ops       = &ahci_sb600_ops,
454         },
455         /* board_ahci_mcp65 */
456         {
457                 AHCI_HFLAGS     (AHCI_HFLAG_YES_NCQ),
458                 .flags          = AHCI_FLAG_COMMON,
459                 .pio_mask       = ATA_PIO4,
460                 .udma_mask      = ATA_UDMA6,
461                 .port_ops       = &ahci_ops,
462         },
463         /* board_ahci_nopmp */
464         {
465                 AHCI_HFLAGS     (AHCI_HFLAG_NO_PMP),
466                 .flags          = AHCI_FLAG_COMMON,
467                 .pio_mask       = ATA_PIO4,
468                 .udma_mask      = ATA_UDMA6,
469                 .port_ops       = &ahci_ops,
470         },
471 };
472
473 static const struct pci_device_id ahci_pci_tbl[] = {
474         /* Intel */
475         { PCI_VDEVICE(INTEL, 0x2652), board_ahci }, /* ICH6 */
476         { PCI_VDEVICE(INTEL, 0x2653), board_ahci }, /* ICH6M */
477         { PCI_VDEVICE(INTEL, 0x27c1), board_ahci }, /* ICH7 */
478         { PCI_VDEVICE(INTEL, 0x27c5), board_ahci }, /* ICH7M */
479         { PCI_VDEVICE(INTEL, 0x27c3), board_ahci }, /* ICH7R */
480         { PCI_VDEVICE(AL, 0x5288), board_ahci_ign_iferr }, /* ULi M5288 */
481         { PCI_VDEVICE(INTEL, 0x2681), board_ahci }, /* ESB2 */
482         { PCI_VDEVICE(INTEL, 0x2682), board_ahci }, /* ESB2 */
483         { PCI_VDEVICE(INTEL, 0x2683), board_ahci }, /* ESB2 */
484         { PCI_VDEVICE(INTEL, 0x27c6), board_ahci }, /* ICH7-M DH */
485         { PCI_VDEVICE(INTEL, 0x2821), board_ahci }, /* ICH8 */
486         { PCI_VDEVICE(INTEL, 0x2822), board_ahci }, /* ICH8 */
487         { PCI_VDEVICE(INTEL, 0x2824), board_ahci }, /* ICH8 */
488         { PCI_VDEVICE(INTEL, 0x2829), board_ahci }, /* ICH8M */
489         { PCI_VDEVICE(INTEL, 0x282a), board_ahci }, /* ICH8M */
490         { PCI_VDEVICE(INTEL, 0x2922), board_ahci }, /* ICH9 */
491         { PCI_VDEVICE(INTEL, 0x2923), board_ahci }, /* ICH9 */
492         { PCI_VDEVICE(INTEL, 0x2924), board_ahci }, /* ICH9 */
493         { PCI_VDEVICE(INTEL, 0x2925), board_ahci }, /* ICH9 */
494         { PCI_VDEVICE(INTEL, 0x2927), board_ahci }, /* ICH9 */
495         { PCI_VDEVICE(INTEL, 0x2929), board_ahci }, /* ICH9M */
496         { PCI_VDEVICE(INTEL, 0x292a), board_ahci }, /* ICH9M */
497         { PCI_VDEVICE(INTEL, 0x292b), board_ahci }, /* ICH9M */
498         { PCI_VDEVICE(INTEL, 0x292c), board_ahci }, /* ICH9M */
499         { PCI_VDEVICE(INTEL, 0x292f), board_ahci }, /* ICH9M */
500         { PCI_VDEVICE(INTEL, 0x294d), board_ahci }, /* ICH9 */
501         { PCI_VDEVICE(INTEL, 0x294e), board_ahci }, /* ICH9M */
502         { PCI_VDEVICE(INTEL, 0x502a), board_ahci }, /* Tolapai */
503         { PCI_VDEVICE(INTEL, 0x502b), board_ahci }, /* Tolapai */
504         { PCI_VDEVICE(INTEL, 0x3a05), board_ahci }, /* ICH10 */
505         { PCI_VDEVICE(INTEL, 0x3a25), board_ahci }, /* ICH10 */
506         { PCI_VDEVICE(INTEL, 0x3b24), board_ahci }, /* PCH RAID */
507         { PCI_VDEVICE(INTEL, 0x3b25), board_ahci }, /* PCH RAID */
508         { PCI_VDEVICE(INTEL, 0x3b2b), board_ahci }, /* PCH RAID */
509         { PCI_VDEVICE(INTEL, 0x3b2c), board_ahci }, /* PCH RAID */
510
511         /* JMicron 360/1/3/5/6, match class to avoid IDE function */
512         { PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
513           PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff, board_ahci_ign_iferr },
514
515         /* ATI */
516         { PCI_VDEVICE(ATI, 0x4380), board_ahci_sb600 }, /* ATI SB600 */
517         { PCI_VDEVICE(ATI, 0x4390), board_ahci_sb700 }, /* ATI SB700/800 */
518         { PCI_VDEVICE(ATI, 0x4391), board_ahci_sb700 }, /* ATI SB700/800 */
519         { PCI_VDEVICE(ATI, 0x4392), board_ahci_sb700 }, /* ATI SB700/800 */
520         { PCI_VDEVICE(ATI, 0x4393), board_ahci_sb700 }, /* ATI SB700/800 */
521         { PCI_VDEVICE(ATI, 0x4394), board_ahci_sb700 }, /* ATI SB700/800 */
522         { PCI_VDEVICE(ATI, 0x4395), board_ahci_sb700 }, /* ATI SB700/800 */
523
524         /* VIA */
525         { PCI_VDEVICE(VIA, 0x3349), board_ahci_vt8251 }, /* VIA VT8251 */
526         { PCI_VDEVICE(VIA, 0x6287), board_ahci_vt8251 }, /* VIA VT8251 */
527
528         /* NVIDIA */
529         { PCI_VDEVICE(NVIDIA, 0x044c), board_ahci_mcp65 },      /* MCP65 */
530         { PCI_VDEVICE(NVIDIA, 0x044d), board_ahci_mcp65 },      /* MCP65 */
531         { PCI_VDEVICE(NVIDIA, 0x044e), board_ahci_mcp65 },      /* MCP65 */
532         { PCI_VDEVICE(NVIDIA, 0x044f), board_ahci_mcp65 },      /* MCP65 */
533         { PCI_VDEVICE(NVIDIA, 0x045c), board_ahci_mcp65 },      /* MCP65 */
534         { PCI_VDEVICE(NVIDIA, 0x045d), board_ahci_mcp65 },      /* MCP65 */
535         { PCI_VDEVICE(NVIDIA, 0x045e), board_ahci_mcp65 },      /* MCP65 */
536         { PCI_VDEVICE(NVIDIA, 0x045f), board_ahci_mcp65 },      /* MCP65 */
537         { PCI_VDEVICE(NVIDIA, 0x0550), board_ahci },            /* MCP67 */
538         { PCI_VDEVICE(NVIDIA, 0x0551), board_ahci },            /* MCP67 */
539         { PCI_VDEVICE(NVIDIA, 0x0552), board_ahci },            /* MCP67 */
540         { PCI_VDEVICE(NVIDIA, 0x0553), board_ahci },            /* MCP67 */
541         { PCI_VDEVICE(NVIDIA, 0x0554), board_ahci },            /* MCP67 */
542         { PCI_VDEVICE(NVIDIA, 0x0555), board_ahci },            /* MCP67 */
543         { PCI_VDEVICE(NVIDIA, 0x0556), board_ahci },            /* MCP67 */
544         { PCI_VDEVICE(NVIDIA, 0x0557), board_ahci },            /* MCP67 */
545         { PCI_VDEVICE(NVIDIA, 0x0558), board_ahci },            /* MCP67 */
546         { PCI_VDEVICE(NVIDIA, 0x0559), board_ahci },            /* MCP67 */
547         { PCI_VDEVICE(NVIDIA, 0x055a), board_ahci },            /* MCP67 */
548         { PCI_VDEVICE(NVIDIA, 0x055b), board_ahci },            /* MCP67 */
549         { PCI_VDEVICE(NVIDIA, 0x07f0), board_ahci },            /* MCP73 */
550         { PCI_VDEVICE(NVIDIA, 0x07f1), board_ahci },            /* MCP73 */
551         { PCI_VDEVICE(NVIDIA, 0x07f2), board_ahci },            /* MCP73 */
552         { PCI_VDEVICE(NVIDIA, 0x07f3), board_ahci },            /* MCP73 */
553         { PCI_VDEVICE(NVIDIA, 0x07f4), board_ahci },            /* MCP73 */
554         { PCI_VDEVICE(NVIDIA, 0x07f5), board_ahci },            /* MCP73 */
555         { PCI_VDEVICE(NVIDIA, 0x07f6), board_ahci },            /* MCP73 */
556         { PCI_VDEVICE(NVIDIA, 0x07f7), board_ahci },            /* MCP73 */
557         { PCI_VDEVICE(NVIDIA, 0x07f8), board_ahci },            /* MCP73 */
558         { PCI_VDEVICE(NVIDIA, 0x07f9), board_ahci },            /* MCP73 */
559         { PCI_VDEVICE(NVIDIA, 0x07fa), board_ahci },            /* MCP73 */
560         { PCI_VDEVICE(NVIDIA, 0x07fb), board_ahci },            /* MCP73 */
561         { PCI_VDEVICE(NVIDIA, 0x0ad0), board_ahci },            /* MCP77 */
562         { PCI_VDEVICE(NVIDIA, 0x0ad1), board_ahci },            /* MCP77 */
563         { PCI_VDEVICE(NVIDIA, 0x0ad2), board_ahci },            /* MCP77 */
564         { PCI_VDEVICE(NVIDIA, 0x0ad3), board_ahci },            /* MCP77 */
565         { PCI_VDEVICE(NVIDIA, 0x0ad4), board_ahci },            /* MCP77 */
566         { PCI_VDEVICE(NVIDIA, 0x0ad5), board_ahci },            /* MCP77 */
567         { PCI_VDEVICE(NVIDIA, 0x0ad6), board_ahci },            /* MCP77 */
568         { PCI_VDEVICE(NVIDIA, 0x0ad7), board_ahci },            /* MCP77 */
569         { PCI_VDEVICE(NVIDIA, 0x0ad8), board_ahci },            /* MCP77 */
570         { PCI_VDEVICE(NVIDIA, 0x0ad9), board_ahci },            /* MCP77 */
571         { PCI_VDEVICE(NVIDIA, 0x0ada), board_ahci },            /* MCP77 */
572         { PCI_VDEVICE(NVIDIA, 0x0adb), board_ahci },            /* MCP77 */
573         { PCI_VDEVICE(NVIDIA, 0x0ab4), board_ahci },            /* MCP79 */
574         { PCI_VDEVICE(NVIDIA, 0x0ab5), board_ahci },            /* MCP79 */
575         { PCI_VDEVICE(NVIDIA, 0x0ab6), board_ahci },            /* MCP79 */
576         { PCI_VDEVICE(NVIDIA, 0x0ab7), board_ahci },            /* MCP79 */
577         { PCI_VDEVICE(NVIDIA, 0x0ab8), board_ahci },            /* MCP79 */
578         { PCI_VDEVICE(NVIDIA, 0x0ab9), board_ahci },            /* MCP79 */
579         { PCI_VDEVICE(NVIDIA, 0x0aba), board_ahci },            /* MCP79 */
580         { PCI_VDEVICE(NVIDIA, 0x0abb), board_ahci },            /* MCP79 */
581         { PCI_VDEVICE(NVIDIA, 0x0abc), board_ahci },            /* MCP79 */
582         { PCI_VDEVICE(NVIDIA, 0x0abd), board_ahci },            /* MCP79 */
583         { PCI_VDEVICE(NVIDIA, 0x0abe), board_ahci },            /* MCP79 */
584         { PCI_VDEVICE(NVIDIA, 0x0abf), board_ahci },            /* MCP79 */
585         { PCI_VDEVICE(NVIDIA, 0x0d84), board_ahci },            /* MCP89 */
586         { PCI_VDEVICE(NVIDIA, 0x0d85), board_ahci },            /* MCP89 */
587         { PCI_VDEVICE(NVIDIA, 0x0d86), board_ahci },            /* MCP89 */
588         { PCI_VDEVICE(NVIDIA, 0x0d87), board_ahci },            /* MCP89 */
589         { PCI_VDEVICE(NVIDIA, 0x0d88), board_ahci },            /* MCP89 */
590         { PCI_VDEVICE(NVIDIA, 0x0d89), board_ahci },            /* MCP89 */
591         { PCI_VDEVICE(NVIDIA, 0x0d8a), board_ahci },            /* MCP89 */
592         { PCI_VDEVICE(NVIDIA, 0x0d8b), board_ahci },            /* MCP89 */
593         { PCI_VDEVICE(NVIDIA, 0x0d8c), board_ahci },            /* MCP89 */
594         { PCI_VDEVICE(NVIDIA, 0x0d8d), board_ahci },            /* MCP89 */
595         { PCI_VDEVICE(NVIDIA, 0x0d8e), board_ahci },            /* MCP89 */
596         { PCI_VDEVICE(NVIDIA, 0x0d8f), board_ahci },            /* MCP89 */
597
598         /* SiS */
599         { PCI_VDEVICE(SI, 0x1184), board_ahci },                /* SiS 966 */
600         { PCI_VDEVICE(SI, 0x1185), board_ahci },                /* SiS 968 */
601         { PCI_VDEVICE(SI, 0x0186), board_ahci },                /* SiS 968 */
602
603         /* Marvell */
604         { PCI_VDEVICE(MARVELL, 0x6145), board_ahci_mv },        /* 6145 */
605         { PCI_VDEVICE(MARVELL, 0x6121), board_ahci_mv },        /* 6121 */
606
607         /* Promise */
608         { PCI_VDEVICE(PROMISE, 0x3f20), board_ahci },   /* PDC42819 */
609
610         /* Generic, PCI class code for AHCI */
611         { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
612           PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff, board_ahci },
613
614         { }     /* terminate list */
615 };
616
617
618 static struct pci_driver ahci_pci_driver = {
619         .name                   = DRV_NAME,
620         .id_table               = ahci_pci_tbl,
621         .probe                  = ahci_init_one,
622         .remove                 = ata_pci_remove_one,
623 #ifdef CONFIG_PM
624         .suspend                = ahci_pci_device_suspend,
625         .resume                 = ahci_pci_device_resume,
626 #endif
627 };
628
629 static int ahci_em_messages = 1;
630 module_param(ahci_em_messages, int, 0444);
631 /* add other LED protocol types when they become supported */
632 MODULE_PARM_DESC(ahci_em_messages,
633         "Set AHCI Enclosure Management Message type (0 = disabled, 1 = LED");
634
635 #if defined(CONFIG_PATA_MARVELL) || defined(CONFIG_PATA_MARVELL_MODULE)
636 static int marvell_enable;
637 #else
638 static int marvell_enable = 1;
639 #endif
640 module_param(marvell_enable, int, 0644);
641 MODULE_PARM_DESC(marvell_enable, "Marvell SATA via AHCI (1 = enabled)");
642
643
644 static inline int ahci_nr_ports(u32 cap)
645 {
646         return (cap & 0x1f) + 1;
647 }
648
649 static inline void __iomem *__ahci_port_base(struct ata_host *host,
650                                              unsigned int port_no)
651 {
652         void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
653
654         return mmio + 0x100 + (port_no * 0x80);
655 }
656
657 static inline void __iomem *ahci_port_base(struct ata_port *ap)
658 {
659         return __ahci_port_base(ap->host, ap->port_no);
660 }
661
662 static void ahci_enable_ahci(void __iomem *mmio)
663 {
664         int i;
665         u32 tmp;
666
667         /* turn on AHCI_EN */
668         tmp = readl(mmio + HOST_CTL);
669         if (tmp & HOST_AHCI_EN)
670                 return;
671
672         /* Some controllers need AHCI_EN to be written multiple times.
673          * Try a few times before giving up.
674          */
675         for (i = 0; i < 5; i++) {
676                 tmp |= HOST_AHCI_EN;
677                 writel(tmp, mmio + HOST_CTL);
678                 tmp = readl(mmio + HOST_CTL);   /* flush && sanity check */
679                 if (tmp & HOST_AHCI_EN)
680                         return;
681                 msleep(10);
682         }
683
684         WARN_ON(1);
685 }
686
687 /**
688  *      ahci_save_initial_config - Save and fixup initial config values
689  *      @pdev: target PCI device
690  *      @hpriv: host private area to store config values
691  *
692  *      Some registers containing configuration info might be setup by
693  *      BIOS and might be cleared on reset.  This function saves the
694  *      initial values of those registers into @hpriv such that they
695  *      can be restored after controller reset.
696  *
697  *      If inconsistent, config values are fixed up by this function.
698  *
699  *      LOCKING:
700  *      None.
701  */
702 static void ahci_save_initial_config(struct pci_dev *pdev,
703                                      struct ahci_host_priv *hpriv)
704 {
705         void __iomem *mmio = pcim_iomap_table(pdev)[AHCI_PCI_BAR];
706         u32 cap, port_map;
707         int i;
708         int mv;
709
710         /* make sure AHCI mode is enabled before accessing CAP */
711         ahci_enable_ahci(mmio);
712
713         /* Values prefixed with saved_ are written back to host after
714          * reset.  Values without are used for driver operation.
715          */
716         hpriv->saved_cap = cap = readl(mmio + HOST_CAP);
717         hpriv->saved_port_map = port_map = readl(mmio + HOST_PORTS_IMPL);
718
719         /* some chips have errata preventing 64bit use */
720         if ((cap & HOST_CAP_64) && (hpriv->flags & AHCI_HFLAG_32BIT_ONLY)) {
721                 dev_printk(KERN_INFO, &pdev->dev,
722                            "controller can't do 64bit DMA, forcing 32bit\n");
723                 cap &= ~HOST_CAP_64;
724         }
725
726         if ((cap & HOST_CAP_NCQ) && (hpriv->flags & AHCI_HFLAG_NO_NCQ)) {
727                 dev_printk(KERN_INFO, &pdev->dev,
728                            "controller can't do NCQ, turning off CAP_NCQ\n");
729                 cap &= ~HOST_CAP_NCQ;
730         }
731
732         if (!(cap & HOST_CAP_NCQ) && (hpriv->flags & AHCI_HFLAG_YES_NCQ)) {
733                 dev_printk(KERN_INFO, &pdev->dev,
734                            "controller can do NCQ, turning on CAP_NCQ\n");
735                 cap |= HOST_CAP_NCQ;
736         }
737
738         if ((cap & HOST_CAP_PMP) && (hpriv->flags & AHCI_HFLAG_NO_PMP)) {
739                 dev_printk(KERN_INFO, &pdev->dev,
740                            "controller can't do PMP, turning off CAP_PMP\n");
741                 cap &= ~HOST_CAP_PMP;
742         }
743
744         if (pdev->vendor == PCI_VENDOR_ID_JMICRON && pdev->device == 0x2361 &&
745             port_map != 1) {
746                 dev_printk(KERN_INFO, &pdev->dev,
747                            "JMB361 has only one port, port_map 0x%x -> 0x%x\n",
748                            port_map, 1);
749                 port_map = 1;
750         }
751
752         /*
753          * Temporary Marvell 6145 hack: PATA port presence
754          * is asserted through the standard AHCI port
755          * presence register, as bit 4 (counting from 0)
756          */
757         if (hpriv->flags & AHCI_HFLAG_MV_PATA) {
758                 if (pdev->device == 0x6121)
759                         mv = 0x3;
760                 else
761                         mv = 0xf;
762                 dev_printk(KERN_ERR, &pdev->dev,
763                            "MV_AHCI HACK: port_map %x -> %x\n",
764                            port_map,
765                            port_map & mv);
766                 dev_printk(KERN_ERR, &pdev->dev,
767                           "Disabling your PATA port. Use the boot option 'ahci.marvell_enable=0' to avoid this.\n");
768
769                 port_map &= mv;
770         }
771
772         /* cross check port_map and cap.n_ports */
773         if (port_map) {
774                 int map_ports = 0;
775
776                 for (i = 0; i < AHCI_MAX_PORTS; i++)
777                         if (port_map & (1 << i))
778                                 map_ports++;
779
780                 /* If PI has more ports than n_ports, whine, clear
781                  * port_map and let it be generated from n_ports.
782                  */
783                 if (map_ports > ahci_nr_ports(cap)) {
784                         dev_printk(KERN_WARNING, &pdev->dev,
785                                    "implemented port map (0x%x) contains more "
786                                    "ports than nr_ports (%u), using nr_ports\n",
787                                    port_map, ahci_nr_ports(cap));
788                         port_map = 0;
789                 }
790         }
791
792         /* fabricate port_map from cap.nr_ports */
793         if (!port_map) {
794                 port_map = (1 << ahci_nr_ports(cap)) - 1;
795                 dev_printk(KERN_WARNING, &pdev->dev,
796                            "forcing PORTS_IMPL to 0x%x\n", port_map);
797
798                 /* write the fixed up value to the PI register */
799                 hpriv->saved_port_map = port_map;
800         }
801
802         /* record values to use during operation */
803         hpriv->cap = cap;
804         hpriv->port_map = port_map;
805 }
806
807 /**
808  *      ahci_restore_initial_config - Restore initial config
809  *      @host: target ATA host
810  *
811  *      Restore initial config stored by ahci_save_initial_config().
812  *
813  *      LOCKING:
814  *      None.
815  */
816 static void ahci_restore_initial_config(struct ata_host *host)
817 {
818         struct ahci_host_priv *hpriv = host->private_data;
819         void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
820
821         writel(hpriv->saved_cap, mmio + HOST_CAP);
822         writel(hpriv->saved_port_map, mmio + HOST_PORTS_IMPL);
823         (void) readl(mmio + HOST_PORTS_IMPL);   /* flush */
824 }
825
826 static unsigned ahci_scr_offset(struct ata_port *ap, unsigned int sc_reg)
827 {
828         static const int offset[] = {
829                 [SCR_STATUS]            = PORT_SCR_STAT,
830                 [SCR_CONTROL]           = PORT_SCR_CTL,
831                 [SCR_ERROR]             = PORT_SCR_ERR,
832                 [SCR_ACTIVE]            = PORT_SCR_ACT,
833                 [SCR_NOTIFICATION]      = PORT_SCR_NTF,
834         };
835         struct ahci_host_priv *hpriv = ap->host->private_data;
836
837         if (sc_reg < ARRAY_SIZE(offset) &&
838             (sc_reg != SCR_NOTIFICATION || (hpriv->cap & HOST_CAP_SNTF)))
839                 return offset[sc_reg];
840         return 0;
841 }
842
843 static int ahci_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val)
844 {
845         void __iomem *port_mmio = ahci_port_base(link->ap);
846         int offset = ahci_scr_offset(link->ap, sc_reg);
847
848         if (offset) {
849                 *val = readl(port_mmio + offset);
850                 return 0;
851         }
852         return -EINVAL;
853 }
854
855 static int ahci_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val)
856 {
857         void __iomem *port_mmio = ahci_port_base(link->ap);
858         int offset = ahci_scr_offset(link->ap, sc_reg);
859
860         if (offset) {
861                 writel(val, port_mmio + offset);
862                 return 0;
863         }
864         return -EINVAL;
865 }
866
867 static void ahci_start_engine(struct ata_port *ap)
868 {
869         void __iomem *port_mmio = ahci_port_base(ap);
870         u32 tmp;
871
872         /* start DMA */
873         tmp = readl(port_mmio + PORT_CMD);
874         tmp |= PORT_CMD_START;
875         writel(tmp, port_mmio + PORT_CMD);
876         readl(port_mmio + PORT_CMD); /* flush */
877 }
878
879 static int ahci_stop_engine(struct ata_port *ap)
880 {
881         void __iomem *port_mmio = ahci_port_base(ap);
882         u32 tmp;
883
884         tmp = readl(port_mmio + PORT_CMD);
885
886         /* check if the HBA is idle */
887         if ((tmp & (PORT_CMD_START | PORT_CMD_LIST_ON)) == 0)
888                 return 0;
889
890         /* setting HBA to idle */
891         tmp &= ~PORT_CMD_START;
892         writel(tmp, port_mmio + PORT_CMD);
893
894         /* wait for engine to stop. This could be as long as 500 msec */
895         tmp = ata_wait_register(port_mmio + PORT_CMD,
896                                 PORT_CMD_LIST_ON, PORT_CMD_LIST_ON, 1, 500);
897         if (tmp & PORT_CMD_LIST_ON)
898                 return -EIO;
899
900         return 0;
901 }
902
903 static void ahci_start_fis_rx(struct ata_port *ap)
904 {
905         void __iomem *port_mmio = ahci_port_base(ap);
906         struct ahci_host_priv *hpriv = ap->host->private_data;
907         struct ahci_port_priv *pp = ap->private_data;
908         u32 tmp;
909
910         /* set FIS registers */
911         if (hpriv->cap & HOST_CAP_64)
912                 writel((pp->cmd_slot_dma >> 16) >> 16,
913                        port_mmio + PORT_LST_ADDR_HI);
914         writel(pp->cmd_slot_dma & 0xffffffff, port_mmio + PORT_LST_ADDR);
915
916         if (hpriv->cap & HOST_CAP_64)
917                 writel((pp->rx_fis_dma >> 16) >> 16,
918                        port_mmio + PORT_FIS_ADDR_HI);
919         writel(pp->rx_fis_dma & 0xffffffff, port_mmio + PORT_FIS_ADDR);
920
921         /* enable FIS reception */
922         tmp = readl(port_mmio + PORT_CMD);
923         tmp |= PORT_CMD_FIS_RX;
924         writel(tmp, port_mmio + PORT_CMD);
925
926         /* flush */
927         readl(port_mmio + PORT_CMD);
928 }
929
930 static int ahci_stop_fis_rx(struct ata_port *ap)
931 {
932         void __iomem *port_mmio = ahci_port_base(ap);
933         u32 tmp;
934
935         /* disable FIS reception */
936         tmp = readl(port_mmio + PORT_CMD);
937         tmp &= ~PORT_CMD_FIS_RX;
938         writel(tmp, port_mmio + PORT_CMD);
939
940         /* wait for completion, spec says 500ms, give it 1000 */
941         tmp = ata_wait_register(port_mmio + PORT_CMD, PORT_CMD_FIS_ON,
942                                 PORT_CMD_FIS_ON, 10, 1000);
943         if (tmp & PORT_CMD_FIS_ON)
944                 return -EBUSY;
945
946         return 0;
947 }
948
949 static void ahci_power_up(struct ata_port *ap)
950 {
951         struct ahci_host_priv *hpriv = ap->host->private_data;
952         void __iomem *port_mmio = ahci_port_base(ap);
953         u32 cmd;
954
955         cmd = readl(port_mmio + PORT_CMD) & ~PORT_CMD_ICC_MASK;
956
957         /* spin up device */
958         if (hpriv->cap & HOST_CAP_SSS) {
959                 cmd |= PORT_CMD_SPIN_UP;
960                 writel(cmd, port_mmio + PORT_CMD);
961         }
962
963         /* wake up link */
964         writel(cmd | PORT_CMD_ICC_ACTIVE, port_mmio + PORT_CMD);
965 }
966
967 static void ahci_disable_alpm(struct ata_port *ap)
968 {
969         struct ahci_host_priv *hpriv = ap->host->private_data;
970         void __iomem *port_mmio = ahci_port_base(ap);
971         u32 cmd;
972         struct ahci_port_priv *pp = ap->private_data;
973
974         /* IPM bits should be disabled by libata-core */
975         /* get the existing command bits */
976         cmd = readl(port_mmio + PORT_CMD);
977
978         /* disable ALPM and ASP */
979         cmd &= ~PORT_CMD_ASP;
980         cmd &= ~PORT_CMD_ALPE;
981
982         /* force the interface back to active */
983         cmd |= PORT_CMD_ICC_ACTIVE;
984
985         /* write out new cmd value */
986         writel(cmd, port_mmio + PORT_CMD);
987         cmd = readl(port_mmio + PORT_CMD);
988
989         /* wait 10ms to be sure we've come out of any low power state */
990         msleep(10);
991
992         /* clear out any PhyRdy stuff from interrupt status */
993         writel(PORT_IRQ_PHYRDY, port_mmio + PORT_IRQ_STAT);
994
995         /* go ahead and clean out PhyRdy Change from Serror too */
996         ahci_scr_write(&ap->link, SCR_ERROR, ((1 << 16) | (1 << 18)));
997
998         /*
999          * Clear flag to indicate that we should ignore all PhyRdy
1000          * state changes
1001          */
1002         hpriv->flags &= ~AHCI_HFLAG_NO_HOTPLUG;
1003
1004         /*
1005          * Enable interrupts on Phy Ready.
1006          */
1007         pp->intr_mask |= PORT_IRQ_PHYRDY;
1008         writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
1009
1010         /*
1011          * don't change the link pm policy - we can be called
1012          * just to turn of link pm temporarily
1013          */
1014 }
1015
1016 static int ahci_enable_alpm(struct ata_port *ap,
1017         enum link_pm policy)
1018 {
1019         struct ahci_host_priv *hpriv = ap->host->private_data;
1020         void __iomem *port_mmio = ahci_port_base(ap);
1021         u32 cmd;
1022         struct ahci_port_priv *pp = ap->private_data;
1023         u32 asp;
1024
1025         /* Make sure the host is capable of link power management */
1026         if (!(hpriv->cap & HOST_CAP_ALPM))
1027                 return -EINVAL;
1028
1029         switch (policy) {
1030         case MAX_PERFORMANCE:
1031         case NOT_AVAILABLE:
1032                 /*
1033                  * if we came here with NOT_AVAILABLE,
1034                  * it just means this is the first time we
1035                  * have tried to enable - default to max performance,
1036                  * and let the user go to lower power modes on request.
1037                  */
1038                 ahci_disable_alpm(ap);
1039                 return 0;
1040         case MIN_POWER:
1041                 /* configure HBA to enter SLUMBER */
1042                 asp = PORT_CMD_ASP;
1043                 break;
1044         case MEDIUM_POWER:
1045                 /* configure HBA to enter PARTIAL */
1046                 asp = 0;
1047                 break;
1048         default:
1049                 return -EINVAL;
1050         }
1051
1052         /*
1053          * Disable interrupts on Phy Ready. This keeps us from
1054          * getting woken up due to spurious phy ready interrupts
1055          * TBD - Hot plug should be done via polling now, is
1056          * that even supported?
1057          */
1058         pp->intr_mask &= ~PORT_IRQ_PHYRDY;
1059         writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
1060
1061         /*
1062          * Set a flag to indicate that we should ignore all PhyRdy
1063          * state changes since these can happen now whenever we
1064          * change link state
1065          */
1066         hpriv->flags |= AHCI_HFLAG_NO_HOTPLUG;
1067
1068         /* get the existing command bits */
1069         cmd = readl(port_mmio + PORT_CMD);
1070
1071         /*
1072          * Set ASP based on Policy
1073          */
1074         cmd |= asp;
1075
1076         /*
1077          * Setting this bit will instruct the HBA to aggressively
1078          * enter a lower power link state when it's appropriate and
1079          * based on the value set above for ASP
1080          */
1081         cmd |= PORT_CMD_ALPE;
1082
1083         /* write out new cmd value */
1084         writel(cmd, port_mmio + PORT_CMD);
1085         cmd = readl(port_mmio + PORT_CMD);
1086
1087         /* IPM bits should be set by libata-core */
1088         return 0;
1089 }
1090
1091 #ifdef CONFIG_PM
1092 static void ahci_power_down(struct ata_port *ap)
1093 {
1094         struct ahci_host_priv *hpriv = ap->host->private_data;
1095         void __iomem *port_mmio = ahci_port_base(ap);
1096         u32 cmd, scontrol;
1097
1098         if (!(hpriv->cap & HOST_CAP_SSS))
1099                 return;
1100
1101         /* put device into listen mode, first set PxSCTL.DET to 0 */
1102         scontrol = readl(port_mmio + PORT_SCR_CTL);
1103         scontrol &= ~0xf;
1104         writel(scontrol, port_mmio + PORT_SCR_CTL);
1105
1106         /* then set PxCMD.SUD to 0 */
1107         cmd = readl(port_mmio + PORT_CMD) & ~PORT_CMD_ICC_MASK;
1108         cmd &= ~PORT_CMD_SPIN_UP;
1109         writel(cmd, port_mmio + PORT_CMD);
1110 }
1111 #endif
1112
1113 static void ahci_start_port(struct ata_port *ap)
1114 {
1115         struct ahci_port_priv *pp = ap->private_data;
1116         struct ata_link *link;
1117         struct ahci_em_priv *emp;
1118
1119         /* enable FIS reception */
1120         ahci_start_fis_rx(ap);
1121
1122         /* enable DMA */
1123         ahci_start_engine(ap);
1124
1125         /* turn on LEDs */
1126         if (ap->flags & ATA_FLAG_EM) {
1127                 ata_for_each_link(link, ap, EDGE) {
1128                         emp = &pp->em_priv[link->pmp];
1129                         ahci_transmit_led_message(ap, emp->led_state, 4);
1130                 }
1131         }
1132
1133         if (ap->flags & ATA_FLAG_SW_ACTIVITY)
1134                 ata_for_each_link(link, ap, EDGE)
1135                         ahci_init_sw_activity(link);
1136
1137 }
1138
1139 static int ahci_deinit_port(struct ata_port *ap, const char **emsg)
1140 {
1141         int rc;
1142
1143         /* disable DMA */
1144         rc = ahci_stop_engine(ap);
1145         if (rc) {
1146                 *emsg = "failed to stop engine";
1147                 return rc;
1148         }
1149
1150         /* disable FIS reception */
1151         rc = ahci_stop_fis_rx(ap);
1152         if (rc) {
1153                 *emsg = "failed stop FIS RX";
1154                 return rc;
1155         }
1156
1157         return 0;
1158 }
1159
1160 static int ahci_reset_controller(struct ata_host *host)
1161 {
1162         struct pci_dev *pdev = to_pci_dev(host->dev);
1163         struct ahci_host_priv *hpriv = host->private_data;
1164         void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
1165         u32 tmp;
1166
1167         /* we must be in AHCI mode, before using anything
1168          * AHCI-specific, such as HOST_RESET.
1169          */
1170         ahci_enable_ahci(mmio);
1171
1172         /* global controller reset */
1173         if (!ahci_skip_host_reset) {
1174                 tmp = readl(mmio + HOST_CTL);
1175                 if ((tmp & HOST_RESET) == 0) {
1176                         writel(tmp | HOST_RESET, mmio + HOST_CTL);
1177                         readl(mmio + HOST_CTL); /* flush */
1178                 }
1179
1180                 /*
1181                  * to perform host reset, OS should set HOST_RESET
1182                  * and poll until this bit is read to be "0".
1183                  * reset must complete within 1 second, or
1184                  * the hardware should be considered fried.
1185                  */
1186                 tmp = ata_wait_register(mmio + HOST_CTL, HOST_RESET,
1187                                         HOST_RESET, 10, 1000);
1188
1189                 if (tmp & HOST_RESET) {
1190                         dev_printk(KERN_ERR, host->dev,
1191                                    "controller reset failed (0x%x)\n", tmp);
1192                         return -EIO;
1193                 }
1194
1195                 /* turn on AHCI mode */
1196                 ahci_enable_ahci(mmio);
1197
1198                 /* Some registers might be cleared on reset.  Restore
1199                  * initial values.
1200                  */
1201                 ahci_restore_initial_config(host);
1202         } else
1203                 dev_printk(KERN_INFO, host->dev,
1204                            "skipping global host reset\n");
1205
1206         if (pdev->vendor == PCI_VENDOR_ID_INTEL) {
1207                 u16 tmp16;
1208
1209                 /* configure PCS */
1210                 pci_read_config_word(pdev, 0x92, &tmp16);
1211                 if ((tmp16 & hpriv->port_map) != hpriv->port_map) {
1212                         tmp16 |= hpriv->port_map;
1213                         pci_write_config_word(pdev, 0x92, tmp16);
1214                 }
1215         }
1216
1217         return 0;
1218 }
1219
1220 static void ahci_sw_activity(struct ata_link *link)
1221 {
1222         struct ata_port *ap = link->ap;
1223         struct ahci_port_priv *pp = ap->private_data;
1224         struct ahci_em_priv *emp = &pp->em_priv[link->pmp];
1225
1226         if (!(link->flags & ATA_LFLAG_SW_ACTIVITY))
1227                 return;
1228
1229         emp->activity++;
1230         if (!timer_pending(&emp->timer))
1231                 mod_timer(&emp->timer, jiffies + msecs_to_jiffies(10));
1232 }
1233
1234 static void ahci_sw_activity_blink(unsigned long arg)
1235 {
1236         struct ata_link *link = (struct ata_link *)arg;
1237         struct ata_port *ap = link->ap;
1238         struct ahci_port_priv *pp = ap->private_data;
1239         struct ahci_em_priv *emp = &pp->em_priv[link->pmp];
1240         unsigned long led_message = emp->led_state;
1241         u32 activity_led_state;
1242         unsigned long flags;
1243
1244         led_message &= EM_MSG_LED_VALUE;
1245         led_message |= ap->port_no | (link->pmp << 8);
1246
1247         /* check to see if we've had activity.  If so,
1248          * toggle state of LED and reset timer.  If not,
1249          * turn LED to desired idle state.
1250          */
1251         spin_lock_irqsave(ap->lock, flags);
1252         if (emp->saved_activity != emp->activity) {
1253                 emp->saved_activity = emp->activity;
1254                 /* get the current LED state */
1255                 activity_led_state = led_message & EM_MSG_LED_VALUE_ON;
1256
1257                 if (activity_led_state)
1258                         activity_led_state = 0;
1259                 else
1260                         activity_led_state = 1;
1261
1262                 /* clear old state */
1263                 led_message &= ~EM_MSG_LED_VALUE_ACTIVITY;
1264
1265                 /* toggle state */
1266                 led_message |= (activity_led_state << 16);
1267                 mod_timer(&emp->timer, jiffies + msecs_to_jiffies(100));
1268         } else {
1269                 /* switch to idle */
1270                 led_message &= ~EM_MSG_LED_VALUE_ACTIVITY;
1271                 if (emp->blink_policy == BLINK_OFF)
1272                         led_message |= (1 << 16);
1273         }
1274         spin_unlock_irqrestore(ap->lock, flags);
1275         ahci_transmit_led_message(ap, led_message, 4);
1276 }
1277
1278 static void ahci_init_sw_activity(struct ata_link *link)
1279 {
1280         struct ata_port *ap = link->ap;
1281         struct ahci_port_priv *pp = ap->private_data;
1282         struct ahci_em_priv *emp = &pp->em_priv[link->pmp];
1283
1284         /* init activity stats, setup timer */
1285         emp->saved_activity = emp->activity = 0;
1286         setup_timer(&emp->timer, ahci_sw_activity_blink, (unsigned long)link);
1287
1288         /* check our blink policy and set flag for link if it's enabled */
1289         if (emp->blink_policy)
1290                 link->flags |= ATA_LFLAG_SW_ACTIVITY;
1291 }
1292
1293 static int ahci_reset_em(struct ata_host *host)
1294 {
1295         void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
1296         u32 em_ctl;
1297
1298         em_ctl = readl(mmio + HOST_EM_CTL);
1299         if ((em_ctl & EM_CTL_TM) || (em_ctl & EM_CTL_RST))
1300                 return -EINVAL;
1301
1302         writel(em_ctl | EM_CTL_RST, mmio + HOST_EM_CTL);
1303         return 0;
1304 }
1305
1306 static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state,
1307                                         ssize_t size)
1308 {
1309         struct ahci_host_priv *hpriv = ap->host->private_data;
1310         struct ahci_port_priv *pp = ap->private_data;
1311         void __iomem *mmio = ap->host->iomap[AHCI_PCI_BAR];
1312         u32 em_ctl;
1313         u32 message[] = {0, 0};
1314         unsigned long flags;
1315         int pmp;
1316         struct ahci_em_priv *emp;
1317
1318         /* get the slot number from the message */
1319         pmp = (state & EM_MSG_LED_PMP_SLOT) >> 8;
1320         if (pmp < MAX_SLOTS)
1321                 emp = &pp->em_priv[pmp];
1322         else
1323                 return -EINVAL;
1324
1325         spin_lock_irqsave(ap->lock, flags);
1326
1327         /*
1328          * if we are still busy transmitting a previous message,
1329          * do not allow
1330          */
1331         em_ctl = readl(mmio + HOST_EM_CTL);
1332         if (em_ctl & EM_CTL_TM) {
1333                 spin_unlock_irqrestore(ap->lock, flags);
1334                 return -EINVAL;
1335         }
1336
1337         /*
1338          * create message header - this is all zero except for
1339          * the message size, which is 4 bytes.
1340          */
1341         message[0] |= (4 << 8);
1342
1343         /* ignore 0:4 of byte zero, fill in port info yourself */
1344         message[1] = ((state & ~EM_MSG_LED_HBA_PORT) | ap->port_no);
1345
1346         /* write message to EM_LOC */
1347         writel(message[0], mmio + hpriv->em_loc);
1348         writel(message[1], mmio + hpriv->em_loc+4);
1349
1350         /* save off new led state for port/slot */
1351         emp->led_state = message[1];
1352
1353         /*
1354          * tell hardware to transmit the message
1355          */
1356         writel(em_ctl | EM_CTL_TM, mmio + HOST_EM_CTL);
1357
1358         spin_unlock_irqrestore(ap->lock, flags);
1359         return size;
1360 }
1361
1362 static ssize_t ahci_led_show(struct ata_port *ap, char *buf)
1363 {
1364         struct ahci_port_priv *pp = ap->private_data;
1365         struct ata_link *link;
1366         struct ahci_em_priv *emp;
1367         int rc = 0;
1368
1369         ata_for_each_link(link, ap, EDGE) {
1370                 emp = &pp->em_priv[link->pmp];
1371                 rc += sprintf(buf, "%lx\n", emp->led_state);
1372         }
1373         return rc;
1374 }
1375
1376 static ssize_t ahci_led_store(struct ata_port *ap, const char *buf,
1377                                 size_t size)
1378 {
1379         int state;
1380         int pmp;
1381         struct ahci_port_priv *pp = ap->private_data;
1382         struct ahci_em_priv *emp;
1383
1384         state = simple_strtoul(buf, NULL, 0);
1385
1386         /* get the slot number from the message */
1387         pmp = (state & EM_MSG_LED_PMP_SLOT) >> 8;
1388         if (pmp < MAX_SLOTS)
1389                 emp = &pp->em_priv[pmp];
1390         else
1391                 return -EINVAL;
1392
1393         /* mask off the activity bits if we are in sw_activity
1394          * mode, user should turn off sw_activity before setting
1395          * activity led through em_message
1396          */
1397         if (emp->blink_policy)
1398                 state &= ~EM_MSG_LED_VALUE_ACTIVITY;
1399
1400         return ahci_transmit_led_message(ap, state, size);
1401 }
1402
1403 static ssize_t ahci_activity_store(struct ata_device *dev, enum sw_activity val)
1404 {
1405         struct ata_link *link = dev->link;
1406         struct ata_port *ap = link->ap;
1407         struct ahci_port_priv *pp = ap->private_data;
1408         struct ahci_em_priv *emp = &pp->em_priv[link->pmp];
1409         u32 port_led_state = emp->led_state;
1410
1411         /* save the desired Activity LED behavior */
1412         if (val == OFF) {
1413                 /* clear LFLAG */
1414                 link->flags &= ~(ATA_LFLAG_SW_ACTIVITY);
1415
1416                 /* set the LED to OFF */
1417                 port_led_state &= EM_MSG_LED_VALUE_OFF;
1418                 port_led_state |= (ap->port_no | (link->pmp << 8));
1419                 ahci_transmit_led_message(ap, port_led_state, 4);
1420         } else {
1421                 link->flags |= ATA_LFLAG_SW_ACTIVITY;
1422                 if (val == BLINK_OFF) {
1423                         /* set LED to ON for idle */
1424                         port_led_state &= EM_MSG_LED_VALUE_OFF;
1425                         port_led_state |= (ap->port_no | (link->pmp << 8));
1426                         port_led_state |= EM_MSG_LED_VALUE_ON; /* check this */
1427                         ahci_transmit_led_message(ap, port_led_state, 4);
1428                 }
1429         }
1430         emp->blink_policy = val;
1431         return 0;
1432 }
1433
1434 static ssize_t ahci_activity_show(struct ata_device *dev, char *buf)
1435 {
1436         struct ata_link *link = dev->link;
1437         struct ata_port *ap = link->ap;
1438         struct ahci_port_priv *pp = ap->private_data;
1439         struct ahci_em_priv *emp = &pp->em_priv[link->pmp];
1440
1441         /* display the saved value of activity behavior for this
1442          * disk.
1443          */
1444         return sprintf(buf, "%d\n", emp->blink_policy);
1445 }
1446
1447 static void ahci_port_init(struct pci_dev *pdev, struct ata_port *ap,
1448                            int port_no, void __iomem *mmio,
1449                            void __iomem *port_mmio)
1450 {
1451         const char *emsg = NULL;
1452         int rc;
1453         u32 tmp;
1454
1455         /* make sure port is not active */
1456         rc = ahci_deinit_port(ap, &emsg);
1457         if (rc)
1458                 dev_printk(KERN_WARNING, &pdev->dev,
1459                            "%s (%d)\n", emsg, rc);
1460
1461         /* clear SError */
1462         tmp = readl(port_mmio + PORT_SCR_ERR);
1463         VPRINTK("PORT_SCR_ERR 0x%x\n", tmp);
1464         writel(tmp, port_mmio + PORT_SCR_ERR);
1465
1466         /* clear port IRQ */
1467         tmp = readl(port_mmio + PORT_IRQ_STAT);
1468         VPRINTK("PORT_IRQ_STAT 0x%x\n", tmp);
1469         if (tmp)
1470                 writel(tmp, port_mmio + PORT_IRQ_STAT);
1471
1472         writel(1 << port_no, mmio + HOST_IRQ_STAT);
1473 }
1474
1475 static void ahci_init_controller(struct ata_host *host)
1476 {
1477         struct ahci_host_priv *hpriv = host->private_data;
1478         struct pci_dev *pdev = to_pci_dev(host->dev);
1479         void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
1480         int i;
1481         void __iomem *port_mmio;
1482         u32 tmp;
1483         int mv;
1484
1485         if (hpriv->flags & AHCI_HFLAG_MV_PATA) {
1486                 if (pdev->device == 0x6121)
1487                         mv = 2;
1488                 else
1489                         mv = 4;
1490                 port_mmio = __ahci_port_base(host, mv);
1491
1492                 writel(0, port_mmio + PORT_IRQ_MASK);
1493
1494                 /* clear port IRQ */
1495                 tmp = readl(port_mmio + PORT_IRQ_STAT);
1496                 VPRINTK("PORT_IRQ_STAT 0x%x\n", tmp);
1497                 if (tmp)
1498                         writel(tmp, port_mmio + PORT_IRQ_STAT);
1499         }
1500
1501         for (i = 0; i < host->n_ports; i++) {
1502                 struct ata_port *ap = host->ports[i];
1503
1504                 port_mmio = ahci_port_base(ap);
1505                 if (ata_port_is_dummy(ap))
1506                         continue;
1507
1508                 ahci_port_init(pdev, ap, i, mmio, port_mmio);
1509         }
1510
1511         tmp = readl(mmio + HOST_CTL);
1512         VPRINTK("HOST_CTL 0x%x\n", tmp);
1513         writel(tmp | HOST_IRQ_EN, mmio + HOST_CTL);
1514         tmp = readl(mmio + HOST_CTL);
1515         VPRINTK("HOST_CTL 0x%x\n", tmp);
1516 }
1517
1518 static void ahci_dev_config(struct ata_device *dev)
1519 {
1520         struct ahci_host_priv *hpriv = dev->link->ap->host->private_data;
1521
1522         if (hpriv->flags & AHCI_HFLAG_SECT255) {
1523                 dev->max_sectors = 255;
1524                 ata_dev_printk(dev, KERN_INFO,
1525                                "SB600 AHCI: limiting to 255 sectors per cmd\n");
1526         }
1527 }
1528
1529 static unsigned int ahci_dev_classify(struct ata_port *ap)
1530 {
1531         void __iomem *port_mmio = ahci_port_base(ap);
1532         struct ata_taskfile tf;
1533         u32 tmp;
1534
1535         tmp = readl(port_mmio + PORT_SIG);
1536         tf.lbah         = (tmp >> 24)   & 0xff;
1537         tf.lbam         = (tmp >> 16)   & 0xff;
1538         tf.lbal         = (tmp >> 8)    & 0xff;
1539         tf.nsect        = (tmp)         & 0xff;
1540
1541         return ata_dev_classify(&tf);
1542 }
1543
1544 static void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag,
1545                                u32 opts)
1546 {
1547         dma_addr_t cmd_tbl_dma;
1548
1549         cmd_tbl_dma = pp->cmd_tbl_dma + tag * AHCI_CMD_TBL_SZ;
1550
1551         pp->cmd_slot[tag].opts = cpu_to_le32(opts);
1552         pp->cmd_slot[tag].status = 0;
1553         pp->cmd_slot[tag].tbl_addr = cpu_to_le32(cmd_tbl_dma & 0xffffffff);
1554         pp->cmd_slot[tag].tbl_addr_hi = cpu_to_le32((cmd_tbl_dma >> 16) >> 16);
1555 }
1556
1557 static int ahci_kick_engine(struct ata_port *ap, int force_restart)
1558 {
1559         void __iomem *port_mmio = ahci_port_base(ap);
1560         struct ahci_host_priv *hpriv = ap->host->private_data;
1561         u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF;
1562         u32 tmp;
1563         int busy, rc;
1564
1565         /* do we need to kick the port? */
1566         busy = status & (ATA_BUSY | ATA_DRQ);
1567         if (!busy && !force_restart)
1568                 return 0;
1569
1570         /* stop engine */
1571         rc = ahci_stop_engine(ap);
1572         if (rc)
1573                 goto out_restart;
1574
1575         /* need to do CLO? */
1576         if (!busy) {
1577                 rc = 0;
1578                 goto out_restart;
1579         }
1580
1581         if (!(hpriv->cap & HOST_CAP_CLO)) {
1582                 rc = -EOPNOTSUPP;
1583                 goto out_restart;
1584         }
1585
1586         /* perform CLO */
1587         tmp = readl(port_mmio + PORT_CMD);
1588         tmp |= PORT_CMD_CLO;
1589         writel(tmp, port_mmio + PORT_CMD);
1590
1591         rc = 0;
1592         tmp = ata_wait_register(port_mmio + PORT_CMD,
1593                                 PORT_CMD_CLO, PORT_CMD_CLO, 1, 500);
1594         if (tmp & PORT_CMD_CLO)
1595                 rc = -EIO;
1596
1597         /* restart engine */
1598  out_restart:
1599         ahci_start_engine(ap);
1600         return rc;
1601 }
1602
1603 static int ahci_exec_polled_cmd(struct ata_port *ap, int pmp,
1604                                 struct ata_taskfile *tf, int is_cmd, u16 flags,
1605                                 unsigned long timeout_msec)
1606 {
1607         const u32 cmd_fis_len = 5; /* five dwords */
1608         struct ahci_port_priv *pp = ap->private_data;
1609         void __iomem *port_mmio = ahci_port_base(ap);
1610         u8 *fis = pp->cmd_tbl;
1611         u32 tmp;
1612
1613         /* prep the command */
1614         ata_tf_to_fis(tf, pmp, is_cmd, fis);
1615         ahci_fill_cmd_slot(pp, 0, cmd_fis_len | flags | (pmp << 12));
1616
1617         /* issue & wait */
1618         writel(1, port_mmio + PORT_CMD_ISSUE);
1619
1620         if (timeout_msec) {
1621                 tmp = ata_wait_register(port_mmio + PORT_CMD_ISSUE, 0x1, 0x1,
1622                                         1, timeout_msec);
1623                 if (tmp & 0x1) {
1624                         ahci_kick_engine(ap, 1);
1625                         return -EBUSY;
1626                 }
1627         } else
1628                 readl(port_mmio + PORT_CMD_ISSUE);      /* flush */
1629
1630         return 0;
1631 }
1632
1633 static int ahci_do_softreset(struct ata_link *link, unsigned int *class,
1634                              int pmp, unsigned long deadline,
1635                              int (*check_ready)(struct ata_link *link))
1636 {
1637         struct ata_port *ap = link->ap;
1638         const char *reason = NULL;
1639         unsigned long now, msecs;
1640         struct ata_taskfile tf;
1641         int rc;
1642
1643         DPRINTK("ENTER\n");
1644
1645         /* prepare for SRST (AHCI-1.1 10.4.1) */
1646         rc = ahci_kick_engine(ap, 1);
1647         if (rc && rc != -EOPNOTSUPP)
1648                 ata_link_printk(link, KERN_WARNING,
1649                                 "failed to reset engine (errno=%d)\n", rc);
1650
1651         ata_tf_init(link->device, &tf);
1652
1653         /* issue the first D2H Register FIS */
1654         msecs = 0;
1655         now = jiffies;
1656         if (time_after(now, deadline))
1657                 msecs = jiffies_to_msecs(deadline - now);
1658
1659         tf.ctl |= ATA_SRST;
1660         if (ahci_exec_polled_cmd(ap, pmp, &tf, 0,
1661                                  AHCI_CMD_RESET | AHCI_CMD_CLR_BUSY, msecs)) {
1662                 rc = -EIO;
1663                 reason = "1st FIS failed";
1664                 goto fail;
1665         }
1666
1667         /* spec says at least 5us, but be generous and sleep for 1ms */
1668         msleep(1);
1669
1670         /* issue the second D2H Register FIS */
1671         tf.ctl &= ~ATA_SRST;
1672         ahci_exec_polled_cmd(ap, pmp, &tf, 0, 0, 0);
1673
1674         /* wait for link to become ready */
1675         rc = ata_wait_after_reset(link, deadline, check_ready);
1676         /* link occupied, -ENODEV too is an error */
1677         if (rc) {
1678                 reason = "device not ready";
1679                 goto fail;
1680         }
1681         *class = ahci_dev_classify(ap);
1682
1683         DPRINTK("EXIT, class=%u\n", *class);
1684         return 0;
1685
1686  fail:
1687         ata_link_printk(link, KERN_ERR, "softreset failed (%s)\n", reason);
1688         return rc;
1689 }
1690
1691 static int ahci_check_ready(struct ata_link *link)
1692 {
1693         void __iomem *port_mmio = ahci_port_base(link->ap);
1694         u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF;
1695
1696         return ata_check_ready(status);
1697 }
1698
1699 static int ahci_softreset(struct ata_link *link, unsigned int *class,
1700                           unsigned long deadline)
1701 {
1702         int pmp = sata_srst_pmp(link);
1703
1704         DPRINTK("ENTER\n");
1705
1706         return ahci_do_softreset(link, class, pmp, deadline, ahci_check_ready);
1707 }
1708
1709 static int ahci_sb600_check_ready(struct ata_link *link)
1710 {
1711         void __iomem *port_mmio = ahci_port_base(link->ap);
1712         u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF;
1713         u32 irq_status = readl(port_mmio + PORT_IRQ_STAT);
1714
1715         /*
1716          * There is no need to check TFDATA if BAD PMP is found due to HW bug,
1717          * which can save timeout delay.
1718          */
1719         if (irq_status & PORT_IRQ_BAD_PMP)
1720                 return -EIO;
1721
1722         return ata_check_ready(status);
1723 }
1724
1725 static int ahci_sb600_softreset(struct ata_link *link, unsigned int *class,
1726                                 unsigned long deadline)
1727 {
1728         struct ata_port *ap = link->ap;
1729         void __iomem *port_mmio = ahci_port_base(ap);
1730         int pmp = sata_srst_pmp(link);
1731         int rc;
1732         u32 irq_sts;
1733
1734         DPRINTK("ENTER\n");
1735
1736         rc = ahci_do_softreset(link, class, pmp, deadline,
1737                                ahci_sb600_check_ready);
1738
1739         /*
1740          * Soft reset fails on some ATI chips with IPMS set when PMP
1741          * is enabled but SATA HDD/ODD is connected to SATA port,
1742          * do soft reset again to port 0.
1743          */
1744         if (rc == -EIO) {
1745                 irq_sts = readl(port_mmio + PORT_IRQ_STAT);
1746                 if (irq_sts & PORT_IRQ_BAD_PMP) {
1747                         ata_link_printk(link, KERN_WARNING,
1748                                         "failed due to HW bug, retry pmp=0\n");
1749                         rc = ahci_do_softreset(link, class, 0, deadline,
1750                                                ahci_check_ready);
1751                 }
1752         }
1753
1754         return rc;
1755 }
1756
1757 static int ahci_hardreset(struct ata_link *link, unsigned int *class,
1758                           unsigned long deadline)
1759 {
1760         const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context);
1761         struct ata_port *ap = link->ap;
1762         struct ahci_port_priv *pp = ap->private_data;
1763         u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
1764         struct ata_taskfile tf;
1765         bool online;
1766         int rc;
1767
1768         DPRINTK("ENTER\n");
1769
1770         ahci_stop_engine(ap);
1771
1772         /* clear D2H reception area to properly wait for D2H FIS */
1773         ata_tf_init(link->device, &tf);
1774         tf.command = 0x80;
1775         ata_tf_to_fis(&tf, 0, 0, d2h_fis);
1776
1777         rc = sata_link_hardreset(link, timing, deadline, &online,
1778                                  ahci_check_ready);
1779
1780         ahci_start_engine(ap);
1781
1782         if (online)
1783                 *class = ahci_dev_classify(ap);
1784
1785         DPRINTK("EXIT, rc=%d, class=%u\n", rc, *class);
1786         return rc;
1787 }
1788
1789 static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class,
1790                                  unsigned long deadline)
1791 {
1792         struct ata_port *ap = link->ap;
1793         bool online;
1794         int rc;
1795
1796         DPRINTK("ENTER\n");
1797
1798         ahci_stop_engine(ap);
1799
1800         rc = sata_link_hardreset(link, sata_ehc_deb_timing(&link->eh_context),
1801                                  deadline, &online, NULL);
1802
1803         ahci_start_engine(ap);
1804
1805         DPRINTK("EXIT, rc=%d, class=%u\n", rc, *class);
1806
1807         /* vt8251 doesn't clear BSY on signature FIS reception,
1808          * request follow-up softreset.
1809          */
1810         return online ? -EAGAIN : rc;
1811 }
1812
1813 static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class,
1814                                 unsigned long deadline)
1815 {
1816         struct ata_port *ap = link->ap;
1817         struct ahci_port_priv *pp = ap->private_data;
1818         u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
1819         struct ata_taskfile tf;
1820         bool online;
1821         int rc;
1822
1823         ahci_stop_engine(ap);
1824
1825         /* clear D2H reception area to properly wait for D2H FIS */
1826         ata_tf_init(link->device, &tf);
1827         tf.command = 0x80;
1828         ata_tf_to_fis(&tf, 0, 0, d2h_fis);
1829
1830         rc = sata_link_hardreset(link, sata_ehc_deb_timing(&link->eh_context),
1831                                  deadline, &online, NULL);
1832
1833         ahci_start_engine(ap);
1834
1835         /* The pseudo configuration device on SIMG4726 attached to
1836          * ASUS P5W-DH Deluxe doesn't send signature FIS after
1837          * hardreset if no device is attached to the first downstream
1838          * port && the pseudo device locks up on SRST w/ PMP==0.  To
1839          * work around this, wait for !BSY only briefly.  If BSY isn't
1840          * cleared, perform CLO and proceed to IDENTIFY (achieved by
1841          * ATA_LFLAG_NO_SRST and ATA_LFLAG_ASSUME_ATA).
1842          *
1843          * Wait for two seconds.  Devices attached to downstream port
1844          * which can't process the following IDENTIFY after this will
1845          * have to be reset again.  For most cases, this should
1846          * suffice while making probing snappish enough.
1847          */
1848         if (online) {
1849                 rc = ata_wait_after_reset(link, jiffies + 2 * HZ,
1850                                           ahci_check_ready);
1851                 if (rc)
1852                         ahci_kick_engine(ap, 0);
1853         }
1854         return rc;
1855 }
1856
1857 static void ahci_postreset(struct ata_link *link, unsigned int *class)
1858 {
1859         struct ata_port *ap = link->ap;
1860         void __iomem *port_mmio = ahci_port_base(ap);
1861         u32 new_tmp, tmp;
1862
1863         ata_std_postreset(link, class);
1864
1865         /* Make sure port's ATAPI bit is set appropriately */
1866         new_tmp = tmp = readl(port_mmio + PORT_CMD);
1867         if (*class == ATA_DEV_ATAPI)
1868                 new_tmp |= PORT_CMD_ATAPI;
1869         else
1870                 new_tmp &= ~PORT_CMD_ATAPI;
1871         if (new_tmp != tmp) {
1872                 writel(new_tmp, port_mmio + PORT_CMD);
1873                 readl(port_mmio + PORT_CMD); /* flush */
1874         }
1875 }
1876
1877 static unsigned int ahci_fill_sg(struct ata_queued_cmd *qc, void *cmd_tbl)
1878 {
1879         struct scatterlist *sg;
1880         struct ahci_sg *ahci_sg = cmd_tbl + AHCI_CMD_TBL_HDR_SZ;
1881         unsigned int si;
1882
1883         VPRINTK("ENTER\n");
1884
1885         /*
1886          * Next, the S/G list.
1887          */
1888         for_each_sg(qc->sg, sg, qc->n_elem, si) {
1889                 dma_addr_t addr = sg_dma_address(sg);
1890                 u32 sg_len = sg_dma_len(sg);
1891
1892                 ahci_sg[si].addr = cpu_to_le32(addr & 0xffffffff);
1893                 ahci_sg[si].addr_hi = cpu_to_le32((addr >> 16) >> 16);
1894                 ahci_sg[si].flags_size = cpu_to_le32(sg_len - 1);
1895         }
1896
1897         return si;
1898 }
1899
1900 static void ahci_qc_prep(struct ata_queued_cmd *qc)
1901 {
1902         struct ata_port *ap = qc->ap;
1903         struct ahci_port_priv *pp = ap->private_data;
1904         int is_atapi = ata_is_atapi(qc->tf.protocol);
1905         void *cmd_tbl;
1906         u32 opts;
1907         const u32 cmd_fis_len = 5; /* five dwords */
1908         unsigned int n_elem;
1909
1910         /*
1911          * Fill in command table information.  First, the header,
1912          * a SATA Register - Host to Device command FIS.
1913          */
1914         cmd_tbl = pp->cmd_tbl + qc->tag * AHCI_CMD_TBL_SZ;
1915
1916         ata_tf_to_fis(&qc->tf, qc->dev->link->pmp, 1, cmd_tbl);
1917         if (is_atapi) {
1918                 memset(cmd_tbl + AHCI_CMD_TBL_CDB, 0, 32);
1919                 memcpy(cmd_tbl + AHCI_CMD_TBL_CDB, qc->cdb, qc->dev->cdb_len);
1920         }
1921
1922         n_elem = 0;
1923         if (qc->flags & ATA_QCFLAG_DMAMAP)
1924                 n_elem = ahci_fill_sg(qc, cmd_tbl);
1925
1926         /*
1927          * Fill in command slot information.
1928          */
1929         opts = cmd_fis_len | n_elem << 16 | (qc->dev->link->pmp << 12);
1930         if (qc->tf.flags & ATA_TFLAG_WRITE)
1931                 opts |= AHCI_CMD_WRITE;
1932         if (is_atapi)
1933                 opts |= AHCI_CMD_ATAPI | AHCI_CMD_PREFETCH;
1934
1935         ahci_fill_cmd_slot(pp, qc->tag, opts);
1936 }
1937
1938 static void ahci_error_intr(struct ata_port *ap, u32 irq_stat)
1939 {
1940         struct ahci_host_priv *hpriv = ap->host->private_data;
1941         struct ahci_port_priv *pp = ap->private_data;
1942         struct ata_eh_info *host_ehi = &ap->link.eh_info;
1943         struct ata_link *link = NULL;
1944         struct ata_queued_cmd *active_qc;
1945         struct ata_eh_info *active_ehi;
1946         u32 serror;
1947
1948         /* determine active link */
1949         ata_for_each_link(link, ap, EDGE)
1950                 if (ata_link_active(link))
1951                         break;
1952         if (!link)
1953                 link = &ap->link;
1954
1955         active_qc = ata_qc_from_tag(ap, link->active_tag);
1956         active_ehi = &link->eh_info;
1957
1958         /* record irq stat */
1959         ata_ehi_clear_desc(host_ehi);
1960         ata_ehi_push_desc(host_ehi, "irq_stat 0x%08x", irq_stat);
1961
1962         /* AHCI needs SError cleared; otherwise, it might lock up */
1963         ahci_scr_read(&ap->link, SCR_ERROR, &serror);
1964         ahci_scr_write(&ap->link, SCR_ERROR, serror);
1965         host_ehi->serror |= serror;
1966
1967         /* some controllers set IRQ_IF_ERR on device errors, ignore it */
1968         if (hpriv->flags & AHCI_HFLAG_IGN_IRQ_IF_ERR)
1969                 irq_stat &= ~PORT_IRQ_IF_ERR;
1970
1971         if (irq_stat & PORT_IRQ_TF_ERR) {
1972                 /* If qc is active, charge it; otherwise, the active
1973                  * link.  There's no active qc on NCQ errors.  It will
1974                  * be determined by EH by reading log page 10h.
1975                  */
1976                 if (active_qc)
1977                         active_qc->err_mask |= AC_ERR_DEV;
1978                 else
1979                         active_ehi->err_mask |= AC_ERR_DEV;
1980
1981                 if (hpriv->flags & AHCI_HFLAG_IGN_SERR_INTERNAL)
1982                         host_ehi->serror &= ~SERR_INTERNAL;
1983         }
1984
1985         if (irq_stat & PORT_IRQ_UNK_FIS) {
1986                 u32 *unk = (u32 *)(pp->rx_fis + RX_FIS_UNK);
1987
1988                 active_ehi->err_mask |= AC_ERR_HSM;
1989                 active_ehi->action |= ATA_EH_RESET;
1990                 ata_ehi_push_desc(active_ehi,
1991                                   "unknown FIS %08x %08x %08x %08x" ,
1992                                   unk[0], unk[1], unk[2], unk[3]);
1993         }
1994
1995         if (sata_pmp_attached(ap) && (irq_stat & PORT_IRQ_BAD_PMP)) {
1996                 active_ehi->err_mask |= AC_ERR_HSM;
1997                 active_ehi->action |= ATA_EH_RESET;
1998                 ata_ehi_push_desc(active_ehi, "incorrect PMP");
1999         }
2000
2001         if (irq_stat & (PORT_IRQ_HBUS_ERR | PORT_IRQ_HBUS_DATA_ERR)) {
2002                 host_ehi->err_mask |= AC_ERR_HOST_BUS;
2003                 host_ehi->action |= ATA_EH_RESET;
2004                 ata_ehi_push_desc(host_ehi, "host bus error");
2005         }
2006
2007         if (irq_stat & PORT_IRQ_IF_ERR) {
2008                 host_ehi->err_mask |= AC_ERR_ATA_BUS;
2009                 host_ehi->action |= ATA_EH_RESET;
2010                 ata_ehi_push_desc(host_ehi, "interface fatal error");
2011         }
2012
2013         if (irq_stat & (PORT_IRQ_CONNECT | PORT_IRQ_PHYRDY)) {
2014                 ata_ehi_hotplugged(host_ehi);
2015                 ata_ehi_push_desc(host_ehi, "%s",
2016                         irq_stat & PORT_IRQ_CONNECT ?
2017                         "connection status changed" : "PHY RDY changed");
2018         }
2019
2020         /* okay, let's hand over to EH */
2021
2022         if (irq_stat & PORT_IRQ_FREEZE)
2023                 ata_port_freeze(ap);
2024         else
2025                 ata_port_abort(ap);
2026 }
2027
2028 static void ahci_port_intr(struct ata_port *ap)
2029 {
2030         void __iomem *port_mmio = ahci_port_base(ap);
2031         struct ata_eh_info *ehi = &ap->link.eh_info;
2032         struct ahci_port_priv *pp = ap->private_data;
2033         struct ahci_host_priv *hpriv = ap->host->private_data;
2034         int resetting = !!(ap->pflags & ATA_PFLAG_RESETTING);
2035         u32 status, qc_active;
2036         int rc;
2037
2038         status = readl(port_mmio + PORT_IRQ_STAT);
2039         writel(status, port_mmio + PORT_IRQ_STAT);
2040
2041         /* ignore BAD_PMP while resetting */
2042         if (unlikely(resetting))
2043                 status &= ~PORT_IRQ_BAD_PMP;
2044
2045         /* If we are getting PhyRdy, this is
2046          * just a power state change, we should
2047          * clear out this, plus the PhyRdy/Comm
2048          * Wake bits from Serror
2049          */
2050         if ((hpriv->flags & AHCI_HFLAG_NO_HOTPLUG) &&
2051                 (status & PORT_IRQ_PHYRDY)) {
2052                 status &= ~PORT_IRQ_PHYRDY;
2053                 ahci_scr_write(&ap->link, SCR_ERROR, ((1 << 16) | (1 << 18)));
2054         }
2055
2056         if (unlikely(status & PORT_IRQ_ERROR)) {
2057                 ahci_error_intr(ap, status);
2058                 return;
2059         }
2060
2061         if (status & PORT_IRQ_SDB_FIS) {
2062                 /* If SNotification is available, leave notification
2063                  * handling to sata_async_notification().  If not,
2064                  * emulate it by snooping SDB FIS RX area.
2065                  *
2066                  * Snooping FIS RX area is probably cheaper than
2067                  * poking SNotification but some constrollers which
2068                  * implement SNotification, ICH9 for example, don't
2069                  * store AN SDB FIS into receive area.
2070                  */
2071                 if (hpriv->cap & HOST_CAP_SNTF)
2072                         sata_async_notification(ap);
2073                 else {
2074                         /* If the 'N' bit in word 0 of the FIS is set,
2075                          * we just received asynchronous notification.
2076                          * Tell libata about it.
2077                          */
2078                         const __le32 *f = pp->rx_fis + RX_FIS_SDB;
2079                         u32 f0 = le32_to_cpu(f[0]);
2080
2081                         if (f0 & (1 << 15))
2082                                 sata_async_notification(ap);
2083                 }
2084         }
2085
2086         /* pp->active_link is valid iff any command is in flight */
2087         if (ap->qc_active && pp->active_link->sactive)
2088                 qc_active = readl(port_mmio + PORT_SCR_ACT);
2089         else
2090                 qc_active = readl(port_mmio + PORT_CMD_ISSUE);
2091
2092         rc = ata_qc_complete_multiple(ap, qc_active);
2093
2094         /* while resetting, invalid completions are expected */
2095         if (unlikely(rc < 0 && !resetting)) {
2096                 ehi->err_mask |= AC_ERR_HSM;
2097                 ehi->action |= ATA_EH_RESET;
2098                 ata_port_freeze(ap);
2099         }
2100 }
2101
2102 static irqreturn_t ahci_interrupt(int irq, void *dev_instance)
2103 {
2104         struct ata_host *host = dev_instance;
2105         struct ahci_host_priv *hpriv;
2106         unsigned int i, handled = 0;
2107         void __iomem *mmio;
2108         u32 irq_stat, irq_masked;
2109
2110         VPRINTK("ENTER\n");
2111
2112         hpriv = host->private_data;
2113         mmio = host->iomap[AHCI_PCI_BAR];
2114
2115         /* sigh.  0xffffffff is a valid return from h/w */
2116         irq_stat = readl(mmio + HOST_IRQ_STAT);
2117         if (!irq_stat)
2118                 return IRQ_NONE;
2119
2120         irq_masked = irq_stat & hpriv->port_map;
2121
2122         spin_lock(&host->lock);
2123
2124         for (i = 0; i < host->n_ports; i++) {
2125                 struct ata_port *ap;
2126
2127                 if (!(irq_masked & (1 << i)))
2128                         continue;
2129
2130                 ap = host->ports[i];
2131                 if (ap) {
2132                         ahci_port_intr(ap);
2133                         VPRINTK("port %u\n", i);
2134                 } else {
2135                         VPRINTK("port %u (no irq)\n", i);
2136                         if (ata_ratelimit())
2137                                 dev_printk(KERN_WARNING, host->dev,
2138                                         "interrupt on disabled port %u\n", i);
2139                 }
2140
2141                 handled = 1;
2142         }
2143
2144         /* HOST_IRQ_STAT behaves as level triggered latch meaning that
2145          * it should be cleared after all the port events are cleared;
2146          * otherwise, it will raise a spurious interrupt after each
2147          * valid one.  Please read section 10.6.2 of ahci 1.1 for more
2148          * information.
2149          *
2150          * Also, use the unmasked value to clear interrupt as spurious
2151          * pending event on a dummy port might cause screaming IRQ.
2152          */
2153         writel(irq_stat, mmio + HOST_IRQ_STAT);
2154
2155         spin_unlock(&host->lock);
2156
2157         VPRINTK("EXIT\n");
2158
2159         return IRQ_RETVAL(handled);
2160 }
2161
2162 static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc)
2163 {
2164         struct ata_port *ap = qc->ap;
2165         void __iomem *port_mmio = ahci_port_base(ap);
2166         struct ahci_port_priv *pp = ap->private_data;
2167
2168         /* Keep track of the currently active link.  It will be used
2169          * in completion path to determine whether NCQ phase is in
2170          * progress.
2171          */
2172         pp->active_link = qc->dev->link;
2173
2174         if (qc->tf.protocol == ATA_PROT_NCQ)
2175                 writel(1 << qc->tag, port_mmio + PORT_SCR_ACT);
2176         writel(1 << qc->tag, port_mmio + PORT_CMD_ISSUE);
2177
2178         ahci_sw_activity(qc->dev->link);
2179
2180         return 0;
2181 }
2182
2183 static bool ahci_qc_fill_rtf(struct ata_queued_cmd *qc)
2184 {
2185         struct ahci_port_priv *pp = qc->ap->private_data;
2186         u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
2187
2188         ata_tf_from_fis(d2h_fis, &qc->result_tf);
2189         return true;
2190 }
2191
2192 static void ahci_freeze(struct ata_port *ap)
2193 {
2194         void __iomem *port_mmio = ahci_port_base(ap);
2195
2196         /* turn IRQ off */
2197         writel(0, port_mmio + PORT_IRQ_MASK);
2198 }
2199
2200 static void ahci_thaw(struct ata_port *ap)
2201 {
2202         void __iomem *mmio = ap->host->iomap[AHCI_PCI_BAR];
2203         void __iomem *port_mmio = ahci_port_base(ap);
2204         u32 tmp;
2205         struct ahci_port_priv *pp = ap->private_data;
2206
2207         /* clear IRQ */
2208         tmp = readl(port_mmio + PORT_IRQ_STAT);
2209         writel(tmp, port_mmio + PORT_IRQ_STAT);
2210         writel(1 << ap->port_no, mmio + HOST_IRQ_STAT);
2211
2212         /* turn IRQ back on */
2213         writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
2214 }
2215
2216 static void ahci_error_handler(struct ata_port *ap)
2217 {
2218         if (!(ap->pflags & ATA_PFLAG_FROZEN)) {
2219                 /* restart engine */
2220                 ahci_stop_engine(ap);
2221                 ahci_start_engine(ap);
2222         }
2223
2224         sata_pmp_error_handler(ap);
2225 }
2226
2227 static void ahci_post_internal_cmd(struct ata_queued_cmd *qc)
2228 {
2229         struct ata_port *ap = qc->ap;
2230
2231         /* make DMA engine forget about the failed command */
2232         if (qc->flags & ATA_QCFLAG_FAILED)
2233                 ahci_kick_engine(ap, 1);
2234 }
2235
2236 static void ahci_pmp_attach(struct ata_port *ap)
2237 {
2238         void __iomem *port_mmio = ahci_port_base(ap);
2239         struct ahci_port_priv *pp = ap->private_data;
2240         u32 cmd;
2241
2242         cmd = readl(port_mmio + PORT_CMD);
2243         cmd |= PORT_CMD_PMP;
2244         writel(cmd, port_mmio + PORT_CMD);
2245
2246         pp->intr_mask |= PORT_IRQ_BAD_PMP;
2247         writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
2248 }
2249
2250 static void ahci_pmp_detach(struct ata_port *ap)
2251 {
2252         void __iomem *port_mmio = ahci_port_base(ap);
2253         struct ahci_port_priv *pp = ap->private_data;
2254         u32 cmd;
2255
2256         cmd = readl(port_mmio + PORT_CMD);
2257         cmd &= ~PORT_CMD_PMP;
2258         writel(cmd, port_mmio + PORT_CMD);
2259
2260         pp->intr_mask &= ~PORT_IRQ_BAD_PMP;
2261         writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
2262 }
2263
2264 static int ahci_port_resume(struct ata_port *ap)
2265 {
2266         ahci_power_up(ap);
2267         ahci_start_port(ap);
2268
2269         if (sata_pmp_attached(ap))
2270                 ahci_pmp_attach(ap);
2271         else
2272                 ahci_pmp_detach(ap);
2273
2274         return 0;
2275 }
2276
2277 #ifdef CONFIG_PM
2278 static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg)
2279 {
2280         const char *emsg = NULL;
2281         int rc;
2282
2283         rc = ahci_deinit_port(ap, &emsg);
2284         if (rc == 0)
2285                 ahci_power_down(ap);
2286         else {
2287                 ata_port_printk(ap, KERN_ERR, "%s (%d)\n", emsg, rc);
2288                 ahci_start_port(ap);
2289         }
2290
2291         return rc;
2292 }
2293
2294 static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg)
2295 {
2296         struct ata_host *host = dev_get_drvdata(&pdev->dev);
2297         void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
2298         u32 ctl;
2299
2300         if (mesg.event & PM_EVENT_SLEEP) {
2301                 /* AHCI spec rev1.1 section 8.3.3:
2302                  * Software must disable interrupts prior to requesting a
2303                  * transition of the HBA to D3 state.
2304                  */
2305                 ctl = readl(mmio + HOST_CTL);
2306                 ctl &= ~HOST_IRQ_EN;
2307                 writel(ctl, mmio + HOST_CTL);
2308                 readl(mmio + HOST_CTL); /* flush */
2309         }
2310
2311         return ata_pci_device_suspend(pdev, mesg);
2312 }
2313
2314 static int ahci_pci_device_resume(struct pci_dev *pdev)
2315 {
2316         struct ata_host *host = dev_get_drvdata(&pdev->dev);
2317         int rc;
2318
2319         rc = ata_pci_device_do_resume(pdev);
2320         if (rc)
2321                 return rc;
2322
2323         if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) {
2324                 rc = ahci_reset_controller(host);
2325                 if (rc)
2326                         return rc;
2327
2328                 ahci_init_controller(host);
2329         }
2330
2331         ata_host_resume(host);
2332
2333         return 0;
2334 }
2335 #endif
2336
2337 static int ahci_port_start(struct ata_port *ap)
2338 {
2339         struct device *dev = ap->host->dev;
2340         struct ahci_port_priv *pp;
2341         void *mem;
2342         dma_addr_t mem_dma;
2343
2344         pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL);
2345         if (!pp)
2346                 return -ENOMEM;
2347
2348         mem = dmam_alloc_coherent(dev, AHCI_PORT_PRIV_DMA_SZ, &mem_dma,
2349                                   GFP_KERNEL);
2350         if (!mem)
2351                 return -ENOMEM;
2352         memset(mem, 0, AHCI_PORT_PRIV_DMA_SZ);
2353
2354         /*
2355          * First item in chunk of DMA memory: 32-slot command table,
2356          * 32 bytes each in size
2357          */
2358         pp->cmd_slot = mem;
2359         pp->cmd_slot_dma = mem_dma;
2360
2361         mem += AHCI_CMD_SLOT_SZ;
2362         mem_dma += AHCI_CMD_SLOT_SZ;
2363
2364         /*
2365          * Second item: Received-FIS area
2366          */
2367         pp->rx_fis = mem;
2368         pp->rx_fis_dma = mem_dma;
2369
2370         mem += AHCI_RX_FIS_SZ;
2371         mem_dma += AHCI_RX_FIS_SZ;
2372
2373         /*
2374          * Third item: data area for storing a single command
2375          * and its scatter-gather table
2376          */
2377         pp->cmd_tbl = mem;
2378         pp->cmd_tbl_dma = mem_dma;
2379
2380         /*
2381          * Save off initial list of interrupts to be enabled.
2382          * This could be changed later
2383          */
2384         pp->intr_mask = DEF_PORT_IRQ;
2385
2386         ap->private_data = pp;
2387
2388         /* engage engines, captain */
2389         return ahci_port_resume(ap);
2390 }
2391
2392 static void ahci_port_stop(struct ata_port *ap)
2393 {
2394         const char *emsg = NULL;
2395         int rc;
2396
2397         /* de-initialize port */
2398         rc = ahci_deinit_port(ap, &emsg);
2399         if (rc)
2400                 ata_port_printk(ap, KERN_WARNING, "%s (%d)\n", emsg, rc);
2401 }
2402
2403 static int ahci_configure_dma_masks(struct pci_dev *pdev, int using_dac)
2404 {
2405         int rc;
2406
2407         if (using_dac &&
2408             !pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
2409                 rc = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
2410                 if (rc) {
2411                         rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
2412                         if (rc) {
2413                                 dev_printk(KERN_ERR, &pdev->dev,
2414                                            "64-bit DMA enable failed\n");
2415                                 return rc;
2416                         }
2417                 }
2418         } else {
2419                 rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
2420                 if (rc) {
2421                         dev_printk(KERN_ERR, &pdev->dev,
2422                                    "32-bit DMA enable failed\n");
2423                         return rc;
2424                 }
2425                 rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
2426                 if (rc) {
2427                         dev_printk(KERN_ERR, &pdev->dev,
2428                                    "32-bit consistent DMA enable failed\n");
2429                         return rc;
2430                 }
2431         }
2432         return 0;
2433 }
2434
2435 static void ahci_print_info(struct ata_host *host)
2436 {
2437         struct ahci_host_priv *hpriv = host->private_data;
2438         struct pci_dev *pdev = to_pci_dev(host->dev);
2439         void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
2440         u32 vers, cap, impl, speed;
2441         const char *speed_s;
2442         u16 cc;
2443         const char *scc_s;
2444
2445         vers = readl(mmio + HOST_VERSION);
2446         cap = hpriv->cap;
2447         impl = hpriv->port_map;
2448
2449         speed = (cap >> 20) & 0xf;
2450         if (speed == 1)
2451                 speed_s = "1.5";
2452         else if (speed == 2)
2453                 speed_s = "3";
2454         else if (speed == 3)
2455                 speed_s = "6";
2456         else
2457                 speed_s = "?";
2458
2459         pci_read_config_word(pdev, 0x0a, &cc);
2460         if (cc == PCI_CLASS_STORAGE_IDE)
2461                 scc_s = "IDE";
2462         else if (cc == PCI_CLASS_STORAGE_SATA)
2463                 scc_s = "SATA";
2464         else if (cc == PCI_CLASS_STORAGE_RAID)
2465                 scc_s = "RAID";
2466         else
2467                 scc_s = "unknown";
2468
2469         dev_printk(KERN_INFO, &pdev->dev,
2470                 "AHCI %02x%02x.%02x%02x "
2471                 "%u slots %u ports %s Gbps 0x%x impl %s mode\n"
2472                 ,
2473
2474                 (vers >> 24) & 0xff,
2475                 (vers >> 16) & 0xff,
2476                 (vers >> 8) & 0xff,
2477                 vers & 0xff,
2478
2479                 ((cap >> 8) & 0x1f) + 1,
2480                 (cap & 0x1f) + 1,
2481                 speed_s,
2482                 impl,
2483                 scc_s);
2484
2485         dev_printk(KERN_INFO, &pdev->dev,
2486                 "flags: "
2487                 "%s%s%s%s%s%s%s"
2488                 "%s%s%s%s%s%s%s"
2489                 "%s\n"
2490                 ,
2491
2492                 cap & (1 << 31) ? "64bit " : "",
2493                 cap & (1 << 30) ? "ncq " : "",
2494                 cap & (1 << 29) ? "sntf " : "",
2495                 cap & (1 << 28) ? "ilck " : "",
2496                 cap & (1 << 27) ? "stag " : "",
2497                 cap & (1 << 26) ? "pm " : "",
2498                 cap & (1 << 25) ? "led " : "",
2499
2500                 cap & (1 << 24) ? "clo " : "",
2501                 cap & (1 << 19) ? "nz " : "",
2502                 cap & (1 << 18) ? "only " : "",
2503                 cap & (1 << 17) ? "pmp " : "",
2504                 cap & (1 << 15) ? "pio " : "",
2505                 cap & (1 << 14) ? "slum " : "",
2506                 cap & (1 << 13) ? "part " : "",
2507                 cap & (1 << 6) ? "ems ": ""
2508                 );
2509 }
2510
2511 /* On ASUS P5W DH Deluxe, the second port of PCI device 00:1f.2 is
2512  * hardwired to on-board SIMG 4726.  The chipset is ICH8 and doesn't
2513  * support PMP and the 4726 either directly exports the device
2514  * attached to the first downstream port or acts as a hardware storage
2515  * controller and emulate a single ATA device (can be RAID 0/1 or some
2516  * other configuration).
2517  *
2518  * When there's no device attached to the first downstream port of the
2519  * 4726, "Config Disk" appears, which is a pseudo ATA device to
2520  * configure the 4726.  However, ATA emulation of the device is very
2521  * lame.  It doesn't send signature D2H Reg FIS after the initial
2522  * hardreset, pukes on SRST w/ PMP==0 and has bunch of other issues.
2523  *
2524  * The following function works around the problem by always using
2525  * hardreset on the port and not depending on receiving signature FIS
2526  * afterward.  If signature FIS isn't received soon, ATA class is
2527  * assumed without follow-up softreset.
2528  */
2529 static void ahci_p5wdh_workaround(struct ata_host *host)
2530 {
2531         static struct dmi_system_id sysids[] = {
2532                 {
2533                         .ident = "P5W DH Deluxe",
2534                         .matches = {
2535                                 DMI_MATCH(DMI_SYS_VENDOR,
2536                                           "ASUSTEK COMPUTER INC"),
2537                                 DMI_MATCH(DMI_PRODUCT_NAME, "P5W DH Deluxe"),
2538                         },
2539                 },
2540                 { }
2541         };
2542         struct pci_dev *pdev = to_pci_dev(host->dev);
2543
2544         if (pdev->bus->number == 0 && pdev->devfn == PCI_DEVFN(0x1f, 2) &&
2545             dmi_check_system(sysids)) {
2546                 struct ata_port *ap = host->ports[1];
2547
2548                 dev_printk(KERN_INFO, &pdev->dev, "enabling ASUS P5W DH "
2549                            "Deluxe on-board SIMG4726 workaround\n");
2550
2551                 ap->ops = &ahci_p5wdh_ops;
2552                 ap->link.flags |= ATA_LFLAG_NO_SRST | ATA_LFLAG_ASSUME_ATA;
2553         }
2554 }
2555
2556 static bool ahci_broken_system_poweroff(struct pci_dev *pdev)
2557 {
2558         static const struct dmi_system_id broken_systems[] = {
2559                 {
2560                         .ident = "HP Compaq nx6310",
2561                         .matches = {
2562                                 DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
2563                                 DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nx6310"),
2564                         },
2565                         /* PCI slot number of the controller */
2566                         .driver_data = (void *)0x1FUL,
2567                 },
2568                 {
2569                         .ident = "HP Compaq 6720s",
2570                         .matches = {
2571                                 DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
2572                                 DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq 6720s"),
2573                         },
2574                         /* PCI slot number of the controller */
2575                         .driver_data = (void *)0x1FUL,
2576                 },
2577
2578                 { }     /* terminate list */
2579         };
2580         const struct dmi_system_id *dmi = dmi_first_match(broken_systems);
2581
2582         if (dmi) {
2583                 unsigned long slot = (unsigned long)dmi->driver_data;
2584                 /* apply the quirk only to on-board controllers */
2585                 return slot == PCI_SLOT(pdev->devfn);
2586         }
2587
2588         return false;
2589 }
2590
2591 static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
2592 {
2593         static int printed_version;
2594         unsigned int board_id = ent->driver_data;
2595         struct ata_port_info pi = ahci_port_info[board_id];
2596         const struct ata_port_info *ppi[] = { &pi, NULL };
2597         struct device *dev = &pdev->dev;
2598         struct ahci_host_priv *hpriv;
2599         struct ata_host *host;
2600         int n_ports, i, rc;
2601
2602         VPRINTK("ENTER\n");
2603
2604         WARN_ON(ATA_MAX_QUEUE > AHCI_MAX_CMDS);
2605
2606         if (!printed_version++)
2607                 dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
2608
2609         /* The AHCI driver can only drive the SATA ports, the PATA driver
2610            can drive them all so if both drivers are selected make sure
2611            AHCI stays out of the way */
2612         if (pdev->vendor == PCI_VENDOR_ID_MARVELL && !marvell_enable)
2613                 return -ENODEV;
2614
2615         /* acquire resources */
2616         rc = pcim_enable_device(pdev);
2617         if (rc)
2618                 return rc;
2619
2620         /* AHCI controllers often implement SFF compatible interface.
2621          * Grab all PCI BARs just in case.
2622          */
2623         rc = pcim_iomap_regions_request_all(pdev, 1 << AHCI_PCI_BAR, DRV_NAME);
2624         if (rc == -EBUSY)
2625                 pcim_pin_device(pdev);
2626         if (rc)
2627                 return rc;
2628
2629         if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
2630             (pdev->device == 0x2652 || pdev->device == 0x2653)) {
2631                 u8 map;
2632
2633                 /* ICH6s share the same PCI ID for both piix and ahci
2634                  * modes.  Enabling ahci mode while MAP indicates
2635                  * combined mode is a bad idea.  Yield to ata_piix.
2636                  */
2637                 pci_read_config_byte(pdev, ICH_MAP, &map);
2638                 if (map & 0x3) {
2639                         dev_printk(KERN_INFO, &pdev->dev, "controller is in "
2640                                    "combined mode, can't enable AHCI mode\n");
2641                         return -ENODEV;
2642                 }
2643         }
2644
2645         hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
2646         if (!hpriv)
2647                 return -ENOMEM;
2648         hpriv->flags |= (unsigned long)pi.private_data;
2649
2650         /* MCP65 revision A1 and A2 can't do MSI */
2651         if (board_id == board_ahci_mcp65 &&
2652             (pdev->revision == 0xa1 || pdev->revision == 0xa2))
2653                 hpriv->flags |= AHCI_HFLAG_NO_MSI;
2654
2655         /* SB800 does NOT need the workaround to ignore SERR_INTERNAL */
2656         if (board_id == board_ahci_sb700 && pdev->revision >= 0x40)
2657                 hpriv->flags &= ~AHCI_HFLAG_IGN_SERR_INTERNAL;
2658
2659         if (!(hpriv->flags & AHCI_HFLAG_NO_MSI))
2660                 pci_enable_msi(pdev);
2661
2662         /* save initial config */
2663         ahci_save_initial_config(pdev, hpriv);
2664
2665         /* prepare host */
2666         if (hpriv->cap & HOST_CAP_NCQ)
2667                 pi.flags |= ATA_FLAG_NCQ;
2668
2669         if (hpriv->cap & HOST_CAP_PMP)
2670                 pi.flags |= ATA_FLAG_PMP;
2671
2672         if (ahci_em_messages && (hpriv->cap & HOST_CAP_EMS)) {
2673                 u8 messages;
2674                 void __iomem *mmio = pcim_iomap_table(pdev)[AHCI_PCI_BAR];
2675                 u32 em_loc = readl(mmio + HOST_EM_LOC);
2676                 u32 em_ctl = readl(mmio + HOST_EM_CTL);
2677
2678                 messages = (em_ctl & EM_CTRL_MSG_TYPE) >> 16;
2679
2680                 /* we only support LED message type right now */
2681                 if ((messages & 0x01) && (ahci_em_messages == 1)) {
2682                         /* store em_loc */
2683                         hpriv->em_loc = ((em_loc >> 16) * 4);
2684                         pi.flags |= ATA_FLAG_EM;
2685                         if (!(em_ctl & EM_CTL_ALHD))
2686                                 pi.flags |= ATA_FLAG_SW_ACTIVITY;
2687                 }
2688         }
2689
2690         if (ahci_broken_system_poweroff(pdev)) {
2691                 pi.flags |= ATA_FLAG_NO_POWEROFF_SPINDOWN;
2692                 dev_info(&pdev->dev,
2693                         "quirky BIOS, skipping spindown on poweroff\n");
2694         }
2695
2696         /* CAP.NP sometimes indicate the index of the last enabled
2697          * port, at other times, that of the last possible port, so
2698          * determining the maximum port number requires looking at
2699          * both CAP.NP and port_map.
2700          */
2701         n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map));
2702
2703         host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports);
2704         if (!host)
2705                 return -ENOMEM;
2706         host->iomap = pcim_iomap_table(pdev);
2707         host->private_data = hpriv;
2708
2709         if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss)
2710                 host->flags |= ATA_HOST_PARALLEL_SCAN;
2711         else
2712                 printk(KERN_INFO "ahci: SSS flag set, parallel bus scan disabled\n");
2713
2714         if (pi.flags & ATA_FLAG_EM)
2715                 ahci_reset_em(host);
2716
2717         for (i = 0; i < host->n_ports; i++) {
2718                 struct ata_port *ap = host->ports[i];
2719
2720                 ata_port_pbar_desc(ap, AHCI_PCI_BAR, -1, "abar");
2721                 ata_port_pbar_desc(ap, AHCI_PCI_BAR,
2722                                    0x100 + ap->port_no * 0x80, "port");
2723
2724                 /* set initial link pm policy */
2725                 ap->pm_policy = NOT_AVAILABLE;
2726
2727                 /* set enclosure management message type */
2728                 if (ap->flags & ATA_FLAG_EM)
2729                         ap->em_message_type = ahci_em_messages;
2730
2731
2732                 /* disabled/not-implemented port */
2733                 if (!(hpriv->port_map & (1 << i)))
2734                         ap->ops = &ata_dummy_port_ops;
2735         }
2736
2737         /* apply workaround for ASUS P5W DH Deluxe mainboard */
2738         ahci_p5wdh_workaround(host);
2739
2740         /* initialize adapter */
2741         rc = ahci_configure_dma_masks(pdev, hpriv->cap & HOST_CAP_64);
2742         if (rc)
2743                 return rc;
2744
2745         rc = ahci_reset_controller(host);
2746         if (rc)
2747                 return rc;
2748
2749         ahci_init_controller(host);
2750         ahci_print_info(host);
2751
2752         pci_set_master(pdev);
2753         return ata_host_activate(host, pdev->irq, ahci_interrupt, IRQF_SHARED,
2754                                  &ahci_sht);
2755 }
2756
2757 static int __init ahci_init(void)
2758 {
2759         return pci_register_driver(&ahci_pci_driver);
2760 }
2761
2762 static void __exit ahci_exit(void)
2763 {
2764         pci_unregister_driver(&ahci_pci_driver);
2765 }
2766
2767
2768 MODULE_AUTHOR("Jeff Garzik");
2769 MODULE_DESCRIPTION("AHCI SATA low-level driver");
2770 MODULE_LICENSE("GPL");
2771 MODULE_DEVICE_TABLE(pci, ahci_pci_tbl);
2772 MODULE_VERSION(DRV_VERSION);
2773
2774 module_init(ahci_init);
2775 module_exit(ahci_exit);