x86: fix pageattr handling for lpage percpu allocator and re-enable it
[linux-2.6.git] / arch / x86 / include / asm / percpu.h
1 #ifndef _ASM_X86_PERCPU_H
2 #define _ASM_X86_PERCPU_H
3
4 #ifdef CONFIG_X86_64
5 #define __percpu_seg            gs
6 #define __percpu_mov_op         movq
7 #else
8 #define __percpu_seg            fs
9 #define __percpu_mov_op         movl
10 #endif
11
12 #ifdef __ASSEMBLY__
13
14 /*
15  * PER_CPU finds an address of a per-cpu variable.
16  *
17  * Args:
18  *    var - variable name
19  *    reg - 32bit register
20  *
21  * The resulting address is stored in the "reg" argument.
22  *
23  * Example:
24  *    PER_CPU(cpu_gdt_descr, %ebx)
25  */
26 #ifdef CONFIG_SMP
27 #define PER_CPU(var, reg)                                               \
28         __percpu_mov_op %__percpu_seg:per_cpu__this_cpu_off, reg;       \
29         lea per_cpu__##var(reg), reg
30 #define PER_CPU_VAR(var)        %__percpu_seg:per_cpu__##var
31 #else /* ! SMP */
32 #define PER_CPU(var, reg)                                               \
33         __percpu_mov_op $per_cpu__##var, reg
34 #define PER_CPU_VAR(var)        per_cpu__##var
35 #endif  /* SMP */
36
37 #ifdef CONFIG_X86_64_SMP
38 #define INIT_PER_CPU_VAR(var)  init_per_cpu__##var
39 #else
40 #define INIT_PER_CPU_VAR(var)  per_cpu__##var
41 #endif
42
43 #else /* ...!ASSEMBLY */
44
45 #include <linux/kernel.h>
46 #include <linux/stringify.h>
47
48 #ifdef CONFIG_SMP
49 #define __percpu_arg(x)         "%%"__stringify(__percpu_seg)":%P" #x
50 #define __my_cpu_offset         percpu_read(this_cpu_off)
51 #else
52 #define __percpu_arg(x)         "%" #x
53 #endif
54
55 /*
56  * Initialized pointers to per-cpu variables needed for the boot
57  * processor need to use these macros to get the proper address
58  * offset from __per_cpu_load on SMP.
59  *
60  * There also must be an entry in vmlinux_64.lds.S
61  */
62 #define DECLARE_INIT_PER_CPU(var) \
63        extern typeof(per_cpu_var(var)) init_per_cpu_var(var)
64
65 #ifdef CONFIG_X86_64_SMP
66 #define init_per_cpu_var(var)  init_per_cpu__##var
67 #else
68 #define init_per_cpu_var(var)  per_cpu_var(var)
69 #endif
70
71 /* For arch-specific code, we can use direct single-insn ops (they
72  * don't give an lvalue though). */
73 extern void __bad_percpu_size(void);
74
75 #define percpu_to_op(op, var, val)                      \
76 do {                                                    \
77         typedef typeof(var) T__;                        \
78         if (0) {                                        \
79                 T__ tmp__;                              \
80                 tmp__ = (val);                          \
81         }                                               \
82         switch (sizeof(var)) {                          \
83         case 1:                                         \
84                 asm(op "b %1,"__percpu_arg(0)           \
85                     : "+m" (var)                        \
86                     : "qi" ((T__)(val)));               \
87                 break;                                  \
88         case 2:                                         \
89                 asm(op "w %1,"__percpu_arg(0)           \
90                     : "+m" (var)                        \
91                     : "ri" ((T__)(val)));               \
92                 break;                                  \
93         case 4:                                         \
94                 asm(op "l %1,"__percpu_arg(0)           \
95                     : "+m" (var)                        \
96                     : "ri" ((T__)(val)));               \
97                 break;                                  \
98         case 8:                                         \
99                 asm(op "q %1,"__percpu_arg(0)           \
100                     : "+m" (var)                        \
101                     : "re" ((T__)(val)));               \
102                 break;                                  \
103         default: __bad_percpu_size();                   \
104         }                                               \
105 } while (0)
106
107 #define percpu_from_op(op, var)                         \
108 ({                                                      \
109         typeof(var) ret__;                              \
110         switch (sizeof(var)) {                          \
111         case 1:                                         \
112                 asm(op "b "__percpu_arg(1)",%0"         \
113                     : "=q" (ret__)                      \
114                     : "m" (var));                       \
115                 break;                                  \
116         case 2:                                         \
117                 asm(op "w "__percpu_arg(1)",%0"         \
118                     : "=r" (ret__)                      \
119                     : "m" (var));                       \
120                 break;                                  \
121         case 4:                                         \
122                 asm(op "l "__percpu_arg(1)",%0"         \
123                     : "=r" (ret__)                      \
124                     : "m" (var));                       \
125                 break;                                  \
126         case 8:                                         \
127                 asm(op "q "__percpu_arg(1)",%0"         \
128                     : "=r" (ret__)                      \
129                     : "m" (var));                       \
130                 break;                                  \
131         default: __bad_percpu_size();                   \
132         }                                               \
133         ret__;                                          \
134 })
135
136 #define percpu_read(var)        percpu_from_op("mov", per_cpu__##var)
137 #define percpu_write(var, val)  percpu_to_op("mov", per_cpu__##var, val)
138 #define percpu_add(var, val)    percpu_to_op("add", per_cpu__##var, val)
139 #define percpu_sub(var, val)    percpu_to_op("sub", per_cpu__##var, val)
140 #define percpu_and(var, val)    percpu_to_op("and", per_cpu__##var, val)
141 #define percpu_or(var, val)     percpu_to_op("or", per_cpu__##var, val)
142 #define percpu_xor(var, val)    percpu_to_op("xor", per_cpu__##var, val)
143
144 /* This is not atomic against other CPUs -- CPU preemption needs to be off */
145 #define x86_test_and_clear_bit_percpu(bit, var)                         \
146 ({                                                                      \
147         int old__;                                                      \
148         asm volatile("btr %2,"__percpu_arg(1)"\n\tsbbl %0,%0"           \
149                      : "=r" (old__), "+m" (per_cpu__##var)              \
150                      : "dIr" (bit));                                    \
151         old__;                                                          \
152 })
153
154 #include <asm-generic/percpu.h>
155
156 /* We can use this directly for local CPU (faster). */
157 DECLARE_PER_CPU(unsigned long, this_cpu_off);
158
159 #ifdef CONFIG_NEED_MULTIPLE_NODES
160 void *pcpu_lpage_remapped(void *kaddr);
161 #else
162 static inline void *pcpu_lpage_remapped(void *kaddr)
163 {
164         return NULL;
165 }
166 #endif
167
168 #endif /* !__ASSEMBLY__ */
169
170 #ifdef CONFIG_SMP
171
172 /*
173  * Define the "EARLY_PER_CPU" macros.  These are used for some per_cpu
174  * variables that are initialized and accessed before there are per_cpu
175  * areas allocated.
176  */
177
178 #define DEFINE_EARLY_PER_CPU(_type, _name, _initvalue)                  \
179         DEFINE_PER_CPU(_type, _name) = _initvalue;                      \
180         __typeof__(_type) _name##_early_map[NR_CPUS] __initdata =       \
181                                 { [0 ... NR_CPUS-1] = _initvalue };     \
182         __typeof__(_type) *_name##_early_ptr __refdata = _name##_early_map
183
184 #define EXPORT_EARLY_PER_CPU_SYMBOL(_name)                      \
185         EXPORT_PER_CPU_SYMBOL(_name)
186
187 #define DECLARE_EARLY_PER_CPU(_type, _name)                     \
188         DECLARE_PER_CPU(_type, _name);                          \
189         extern __typeof__(_type) *_name##_early_ptr;            \
190         extern __typeof__(_type)  _name##_early_map[]
191
192 #define early_per_cpu_ptr(_name) (_name##_early_ptr)
193 #define early_per_cpu_map(_name, _idx) (_name##_early_map[_idx])
194 #define early_per_cpu(_name, _cpu)                              \
195         *(early_per_cpu_ptr(_name) ?                            \
196                 &early_per_cpu_ptr(_name)[_cpu] :               \
197                 &per_cpu(_name, _cpu))
198
199 #else   /* !CONFIG_SMP */
200 #define DEFINE_EARLY_PER_CPU(_type, _name, _initvalue)          \
201         DEFINE_PER_CPU(_type, _name) = _initvalue
202
203 #define EXPORT_EARLY_PER_CPU_SYMBOL(_name)                      \
204         EXPORT_PER_CPU_SYMBOL(_name)
205
206 #define DECLARE_EARLY_PER_CPU(_type, _name)                     \
207         DECLARE_PER_CPU(_type, _name)
208
209 #define early_per_cpu(_name, _cpu) per_cpu(_name, _cpu)
210 #define early_per_cpu_ptr(_name) NULL
211 /* no early_per_cpu_map() */
212
213 #endif  /* !CONFIG_SMP */
214
215 #endif /* _ASM_X86_PERCPU_H */