powerpc: Make the 64-bit kernel as a position-independent executable
[linux-2.6.git] / arch / powerpc / boot / Makefile
1 # Makefile for making ELF bootable images for booting on CHRP
2 # using Open Firmware.
3 #
4 # Geert Uytterhoeven    September 1997
5 #
6 # Based on coffboot by Paul Mackerras
7 # Simplified for ppc64 by Todd Inglett
8 #
9 # NOTE: this code is built for 32 bit in ELF32 format even though
10 #       it packages a 64 bit kernel.  We do this to simplify the
11 #       bootloader and increase compatibility with OpenFirmware.
12 #
13 #       To this end we need to define BOOTCC, etc, as the tools
14 #       needed to build the 32 bit image.  That's normally the same
15 #       compiler for the rest of the kernel, with the -m32 flag added.
16 #       To make it easier to setup a cross compiler,
17 #       CROSS32_COMPILE is setup as a prefix just like CROSS_COMPILE
18 #       in the toplevel makefile.
19
20 all: $(obj)/zImage
21
22 BOOTCFLAGS    := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
23                  -fno-strict-aliasing -Os -msoft-float -pipe \
24                  -fomit-frame-pointer -fno-builtin -fPIC -nostdinc \
25                  -isystem $(shell $(CROSS32CC) -print-file-name=include)
26 BOOTAFLAGS      := -D__ASSEMBLY__ $(BOOTCFLAGS) -traditional -nostdinc
27
28 ifdef CONFIG_DEBUG_INFO
29 BOOTCFLAGS      += -g
30 endif
31
32 ifeq ($(call cc-option-yn, -fstack-protector),y)
33 BOOTCFLAGS      += -fno-stack-protector
34 endif
35
36 BOOTCFLAGS      += -I$(obj) -I$(srctree)/$(obj) -I$(srctree)/$(src)/libfdt
37
38 DTS_FLAGS       ?= -p 1024
39
40 $(obj)/4xx.o: BOOTCFLAGS += -mcpu=405
41 $(obj)/ebony.o: BOOTCFLAGS += -mcpu=405
42 $(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=405
43 $(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=405
44 $(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405
45 $(obj)/virtex405-head.o: BOOTAFLAGS += -mcpu=405
46
47
48 zlib       := inffast.c inflate.c inftrees.c
49 zlibheader := inffast.h inffixed.h inflate.h inftrees.h infutil.h
50 zliblinuxheader := zlib.h zconf.h zutil.h
51
52 $(addprefix $(obj)/,$(zlib) cuboot-c2k.o gunzip_util.o main.o prpmc2800.o): \
53         $(addprefix $(obj)/,$(zliblinuxheader)) $(addprefix $(obj)/,$(zlibheader))
54
55 src-libfdt := fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c
56 src-wlib := string.S crt0.S crtsavres.S stdio.c main.c \
57                 $(addprefix libfdt/,$(src-libfdt)) libfdt-wrapper.c \
58                 ns16550.c serial.c simple_alloc.c div64.S util.S \
59                 gunzip_util.c elf_util.c $(zlib) devtree.c oflib.c ofconsole.c \
60                 4xx.c ebony.c mv64x60.c mpsc.c mv64x60_i2c.c cuboot.c bamboo.c \
61                 cpm-serial.c stdlib.c mpc52xx-psc.c planetcore.c uartlite.c \
62                 fsl-soc.c mpc8xx.c pq2.c
63 src-plat := of.c cuboot-52xx.c cuboot-824x.c cuboot-83xx.c cuboot-85xx.c holly.c \
64                 cuboot-ebony.c treeboot-ebony.c prpmc2800.c \
65                 ps3-head.S ps3-hvcall.S ps3.c treeboot-bamboo.c cuboot-8xx.c \
66                 cuboot-pq2.c cuboot-sequoia.c treeboot-walnut.c \
67                 cuboot-bamboo.c cuboot-mpc7448hpc2.c cuboot-taishan.c \
68                 fixed-head.S ep88xc.c ep405.c cuboot-c2k.c \
69                 cuboot-katmai.c cuboot-rainier.c redboot-8xx.c ep8248e.c \
70                 cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \
71                 virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c
72 src-boot := $(src-wlib) $(src-plat) empty.c
73
74 src-boot := $(addprefix $(obj)/, $(src-boot))
75 obj-boot := $(addsuffix .o, $(basename $(src-boot)))
76 obj-wlib := $(addsuffix .o, $(basename $(addprefix $(obj)/, $(src-wlib))))
77 obj-plat := $(addsuffix .o, $(basename $(addprefix $(obj)/, $(src-plat))))
78
79 quiet_cmd_copy_zlib = COPY    $@
80       cmd_copy_zlib = sed "s@__used@@;s@<linux/\([^>]*\).*@\"\1\"@" $< > $@
81
82 quiet_cmd_copy_zlibheader = COPY    $@
83       cmd_copy_zlibheader = sed "s@<linux/\([^>]*\).*@\"\1\"@" $< > $@
84 # stddef.h for NULL
85 quiet_cmd_copy_zliblinuxheader = COPY    $@
86       cmd_copy_zliblinuxheader = sed "s@<linux/string.h>@\"string.h\"@;s@<linux/kernel.h>@<stddef.h>@;s@<linux/\([^>]*\).*@\"\1\"@" $< > $@
87
88 $(addprefix $(obj)/,$(zlib)): $(obj)/%: $(srctree)/lib/zlib_inflate/%
89         $(call cmd,copy_zlib)
90
91 $(addprefix $(obj)/,$(zlibheader)): $(obj)/%: $(srctree)/lib/zlib_inflate/%
92         $(call cmd,copy_zlibheader)
93
94 $(addprefix $(obj)/,$(zliblinuxheader)): $(obj)/%: $(srctree)/include/linux/%
95         $(call cmd,copy_zliblinuxheader)
96
97 $(obj)/empty.c:
98         @touch $@
99
100 $(obj)/zImage.lds $(obj)/zImage.coff.lds $(obj)/zImage.ps3.lds: $(obj)/%: $(srctree)/$(src)/%.S
101         @cp $< $@
102
103 clean-files := $(zlib) $(zlibheader) $(zliblinuxheader) \
104                 empty.c zImage.coff.lds zImage.ps3.lds zImage.lds
105
106 quiet_cmd_bootcc = BOOTCC  $@
107       cmd_bootcc = $(CROSS32CC) -Wp,-MD,$(depfile) $(BOOTCFLAGS) -c -o $@ $<
108
109 quiet_cmd_bootas = BOOTAS  $@
110       cmd_bootas = $(CROSS32CC) -Wp,-MD,$(depfile) $(BOOTAFLAGS) -c -o $@ $<
111
112 quiet_cmd_bootar = BOOTAR  $@
113       cmd_bootar = $(CROSS32AR) -cr $@.$$$$ $(filter-out FORCE,$^); mv $@.$$$$ $@
114
115 $(patsubst %.c,%.o, $(filter %.c, $(src-boot))): %.o: %.c FORCE
116         $(Q)mkdir -p $(dir $@)
117         $(call if_changed_dep,bootcc)
118 $(patsubst %.S,%.o, $(filter %.S, $(src-boot))): %.o: %.S FORCE
119         $(Q)mkdir -p $(dir $@)
120         $(call if_changed_dep,bootas)
121
122 $(obj)/wrapper.a: $(obj-wlib) FORCE
123         $(call if_changed,bootar)
124
125 hostprogs-y     := addnote addRamDisk hack-coff mktree dtc
126
127 targets         += $(patsubst $(obj)/%,%,$(obj-boot) wrapper.a)
128 extra-y         := $(obj)/wrapper.a $(obj-plat) $(obj)/empty.o \
129                    $(obj)/zImage.lds $(obj)/zImage.coff.lds $(obj)/zImage.ps3.lds
130
131 dtstree         := $(srctree)/$(src)/dts
132
133 wrapper         :=$(srctree)/$(src)/wrapper
134 wrapperbits     := $(extra-y) $(addprefix $(obj)/,addnote hack-coff mktree dtc) \
135                         $(wrapper) FORCE
136
137 #############
138 # Bits for building dtc
139 # DTC_GENPARSER      := 1    # Uncomment to rebuild flex/bison output
140
141 dtc-objs := dtc.o flattree.o fstree.o data.o livetree.o treesource.o srcpos.o checks.o
142 dtc-objs += dtc-lexer.lex.o dtc-parser.tab.o
143 dtc-objs := $(addprefix dtc-src/, $(dtc-objs))
144
145 # prerequisites on generated files needs to be explicit
146 $(obj)/dtc-src/dtc-parser.tab.o: $(obj)/dtc-src/dtc-parser.tab.c $(obj)/dtc-src/dtc-parser.tab.h
147 $(obj)/dtc-src/dtc-lexer.lex.o:  $(obj)/dtc-src/dtc-lexer.lex.c $(obj)/dtc-src/dtc-parser.tab.h
148
149 HOSTCFLAGS += -I$(src)/dtc-src/ -I$(src)/libfdt/
150
151 targets += dtc-src/dtc-parser.tab.c
152 targets += dtc-src/dtc-lexer.lex.c
153
154 clean-files += dtc-src/dtc-parser.tab.h
155
156 ifdef DTC_GENPARSER
157 BISON = bison
158 FLEX = flex
159
160 quiet_cmd_bison = BISON   $@
161       cmd_bison = $(BISON) -o$@ -d $<; cp $@ $@_shipped
162 quiet_cmd_flex = FLEX    $@
163       cmd_flex = $(FLEX) -o$@ $<; cp $@ $@_shipped
164
165 $(obj)/dtc-src/dtc-parser.tab.c: $(src)/dtc-src/dtc-parser.y FORCE
166         $(call if_changed,bison)
167
168 $(obj)/dtc-src/dtc-parser.tab.h: $(obj)/dtc-src/dtc-parser.tab.c
169
170 $(obj)/dtc-src/dtc-lexer.lex.c: $(src)/dtc-src/dtc-lexer.l FORCE
171         $(call if_changed,flex)
172 endif
173
174 #############
175 # Bits for building various flavours of zImage
176
177 ifneq ($(CROSS32_COMPILE),)
178 CROSSWRAP := -C "$(CROSS32_COMPILE)"
179 else
180 ifneq ($(CROSS_COMPILE),)
181 CROSSWRAP := -C "$(CROSS_COMPILE)"
182 endif
183 endif
184
185 # args (to if_changed): 1 = (this rule), 2 = platform, 3 = dts 4=dtb 5=initrd
186 quiet_cmd_wrap  = WRAP    $@
187       cmd_wrap  =$(CONFIG_SHELL) $(wrapper) -c -o $@ -p $2 $(CROSSWRAP) \
188                 $(if $3, -s $3)$(if $4, -d $4)$(if $5, -i $5) vmlinux
189
190 image-$(CONFIG_PPC_PSERIES)             += zImage.pseries
191 image-$(CONFIG_PPC_MAPLE)               += zImage.pseries
192 image-$(CONFIG_PPC_IBM_CELL_BLADE)      += zImage.pseries
193 image-$(CONFIG_PPC_PS3)                 += dtbImage.ps3
194 image-$(CONFIG_PPC_CELLEB)              += zImage.pseries
195 image-$(CONFIG_PPC_CHRP)                += zImage.chrp
196 image-$(CONFIG_PPC_EFIKA)               += zImage.chrp
197 image-$(CONFIG_PPC_PMAC)                += zImage.pmac
198 image-$(CONFIG_PPC_HOLLY)               += zImage.holly
199 image-$(CONFIG_PPC_PRPMC2800)           += dtbImage.prpmc2800
200 image-$(CONFIG_PPC_ISERIES)             += zImage.iseries
201 image-$(CONFIG_DEFAULT_UIMAGE)          += uImage
202
203 #
204 # Targets which embed a device tree blob
205 #
206 # Theses are default targets to build images which embed device tree blobs.
207 # They are only required on boards which do not have FDT support in firmware.
208 # Boards with newish u-boot firmare can use the uImage target above
209 #
210
211 # Board ports in arch/powerpc/platform/40x/Kconfig
212 image-$(CONFIG_EP405)                   += dtbImage.ep405
213 image-$(CONFIG_WALNUT)                  += treeImage.walnut
214
215 # Board ports in arch/powerpc/platform/44x/Kconfig
216 image-$(CONFIG_EBONY)                   += treeImage.ebony cuImage.ebony
217 image-$(CONFIG_BAMBOO)                  += treeImage.bamboo cuImage.bamboo
218 image-$(CONFIG_SAM440EP)                += cuImage.sam440ep
219 image-$(CONFIG_SEQUOIA)                 += cuImage.sequoia
220 image-$(CONFIG_RAINIER)                 += cuImage.rainier
221 image-$(CONFIG_TAISHAN)                 += cuImage.taishan
222 image-$(CONFIG_KATMAI)                  += cuImage.katmai
223 image-$(CONFIG_WARP)                    += cuImage.warp
224 image-$(CONFIG_YOSEMITE)                += cuImage.yosemite
225
226 # Board ports in arch/powerpc/platform/8xx/Kconfig
227 image-$(CONFIG_MPC86XADS)               += cuImage.mpc866ads
228 image-$(CONFIG_MPC885ADS)               += cuImage.mpc885ads
229 image-$(CONFIG_PPC_EP88XC)              += dtbImage.ep88xc
230 image-$(CONFIG_PPC_ADDER875)            += cuImage.adder875-uboot \
231                                            dtbImage.adder875-redboot
232
233 # Board ports in arch/powerpc/platform/52xx/Kconfig
234 image-$(CONFIG_PPC_LITE5200)            += cuImage.lite5200 cuImage.lite5200b
235
236 # Board ports in arch/powerpc/platform/82xx/Kconfig
237 image-$(CONFIG_MPC8272_ADS)             += cuImage.mpc8272ads
238 image-$(CONFIG_PQ2FADS)                 += cuImage.pq2fads
239 image-$(CONFIG_EP8248E)                 += dtbImage.ep8248e
240
241 # Board ports in arch/powerpc/platform/83xx/Kconfig
242 image-$(CONFIG_MPC832x_MDS)             += cuImage.mpc832x_mds
243 image-$(CONFIG_MPC832x_RDB)             += cuImage.mpc832x_rdb
244 image-$(CONFIG_MPC834x_ITX)             += cuImage.mpc8349emitx \
245                                            cuImage.mpc8349emitxgp
246 image-$(CONFIG_MPC834x_MDS)             += cuImage.mpc834x_mds
247 image-$(CONFIG_MPC836x_MDS)             += cuImage.mpc836x_mds
248 image-$(CONFIG_ASP834x)                 += dtbImage.asp834x-redboot
249
250 # Board ports in arch/powerpc/platform/85xx/Kconfig
251 image-$(CONFIG_MPC8540_ADS)             += cuImage.mpc8540ads
252 image-$(CONFIG_MPC8560_ADS)             += cuImage.mpc8560ads
253 image-$(CONFIG_MPC85xx_CDS)             += cuImage.mpc8541cds \
254                                            cuImage.mpc8548cds \
255                                            cuImage.mpc8555cds
256 image-$(CONFIG_MPC85xx_MDS)             += cuImage.mpc8568mds
257 image-$(CONFIG_MPC85xx_DS)              += cuImage.mpc8544ds \
258                                            cuImage.mpc8572ds
259 image-$(CONFIG_TQM8540)                 += cuImage.tqm8540
260 image-$(CONFIG_TQM8541)                 += cuImage.tqm8541
261 image-$(CONFIG_TQM8548)                 += cuImage.tqm8548
262 image-$(CONFIG_TQM8555)                 += cuImage.tqm8555
263 image-$(CONFIG_TQM8560)                 += cuImage.tqm8560
264 image-$(CONFIG_SBC8548)                 += cuImage.sbc8548
265 image-$(CONFIG_SBC8560)                 += cuImage.sbc8560
266 image-$(CONFIG_KSI8560)                 += cuImage.ksi8560
267
268 # Board ports in arch/powerpc/platform/embedded6xx/Kconfig
269 image-$(CONFIG_STORCENTER)              += cuImage.storcenter
270 image-$(CONFIG_MPC7448HPC2)             += cuImage.mpc7448hpc2
271 image-$(CONFIG_PPC_C2K)                 += cuImage.c2k
272
273 # For 32-bit powermacs, build the COFF and miboot images
274 # as well as the ELF images.
275 ifeq ($(CONFIG_PPC32),y)
276 image-$(CONFIG_PPC_PMAC)        += zImage.coff zImage.miboot
277 endif
278
279 # Allow extra targets to be added to the defconfig
280 image-y += $(subst ",,$(CONFIG_EXTRA_TARGETS))
281
282 initrd-  := $(patsubst zImage%, zImage.initrd%, $(image-n) $(image-))
283 initrd-y := $(patsubst zImage%, zImage.initrd%, \
284                 $(patsubst dtbImage%, dtbImage.initrd%, \
285                 $(patsubst simpleImage%, simpleImage.initrd%, \
286                 $(patsubst treeImage%, treeImage.initrd%, $(image-y)))))
287 initrd-y := $(filter-out $(image-y), $(initrd-y))
288 targets += $(image-y) $(initrd-y)
289
290 $(addprefix $(obj)/, $(initrd-y)): $(obj)/ramdisk.image.gz
291
292 # Don't put the ramdisk on the pattern rule; when its missing make will try
293 # the pattern rule with less dependencies that also matches (even with the
294 # hard dependency listed).
295 $(obj)/zImage.initrd.%: vmlinux $(wrapperbits)
296         $(call if_changed,wrap,$*,,,$(obj)/ramdisk.image.gz)
297
298 $(obj)/zImage.%: vmlinux $(wrapperbits)
299         $(call if_changed,wrap,$*)
300
301 # dtbImage% - a dtbImage is a zImage with an embedded device tree blob
302 $(obj)/dtbImage.initrd.%: vmlinux $(wrapperbits) $(obj)/%.dtb
303         $(call if_changed,wrap,$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
304
305 $(obj)/dtbImage.%: vmlinux $(wrapperbits) $(obj)/%.dtb
306         $(call if_changed,wrap,$*,,$(obj)/$*.dtb)
307
308 # This cannot be in the root of $(src) as the zImage rule always adds a $(obj)
309 # prefix
310 $(obj)/vmlinux.strip: vmlinux
311         $(STRIP) -s -R .comment $< -o $@
312
313 # The iseries hypervisor won't take an ET_DYN executable, so this
314 # changes the type (byte 17) in the file to ET_EXEC (2).
315 $(obj)/zImage.iseries: vmlinux
316         $(STRIP) -s -R .comment $< -o $@
317         printf "\x02" | dd of=$@ conv=notrunc bs=1 seek=17
318
319 $(obj)/uImage: vmlinux $(wrapperbits)
320         $(call if_changed,wrap,uboot)
321
322 $(obj)/cuImage.%: vmlinux $(obj)/%.dtb $(wrapperbits)
323         $(call if_changed,wrap,cuboot-$*,,$(obj)/$*.dtb)
324
325 $(obj)/simpleImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits)
326         $(call if_changed,wrap,simpleboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
327
328 $(obj)/simpleImage.%: vmlinux $(obj)/%.dtb $(wrapperbits)
329         $(call if_changed,wrap,simpleboot-$*,,$(obj)/$*.dtb)
330
331 $(obj)/treeImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits)
332         $(call if_changed,wrap,treeboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
333
334 $(obj)/treeImage.%: vmlinux $(obj)/%.dtb $(wrapperbits)
335         $(call if_changed,wrap,treeboot-$*,,$(obj)/$*.dtb)
336
337 # Rule to build device tree blobs
338 $(obj)/%.dtb: $(dtstree)/%.dts $(obj)/dtc
339         $(obj)/dtc -O dtb -o $(obj)/$*.dtb -b 0 $(DTS_FLAGS) $(dtstree)/$*.dts
340
341 # If there isn't a platform selected then just strip the vmlinux.
342 ifeq (,$(image-y))
343 image-y := vmlinux.strip
344 endif
345
346 $(obj)/zImage:          $(addprefix $(obj)/, $(image-y))
347         @rm -f $@; ln $< $@
348 $(obj)/zImage.initrd:   $(addprefix $(obj)/, $(initrd-y))
349         @rm -f $@; ln $< $@
350
351 install: $(CONFIGURE) $(addprefix $(obj)/, $(image-y))
352         sh -x $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" vmlinux System.map "$(INSTALL_PATH)" $<
353
354 # anything not in $(targets)
355 clean-files += $(image-) $(initrd-) cuImage.* dtbImage.* treeImage.* \
356         zImage zImage.initrd zImage.chrp zImage.coff zImage.holly \
357         zImage.iseries zImage.miboot zImage.pmac zImage.pseries \
358         otheros.bld *.dtb
359
360 # clean up files cached by wrapper
361 clean-kernel := vmlinux.strip vmlinux.bin
362 clean-kernel += $(addsuffix .gz,$(clean-kernel))
363 # If not absolute clean-files are relative to $(obj).
364 clean-files += $(addprefix $(objtree)/, $(clean-kernel))
365
366 WRAPPER_OBJDIR := /usr/lib/kernel-wrapper
367 WRAPPER_DTSDIR := /usr/lib/kernel-wrapper/dts
368 WRAPPER_BINDIR := /usr/sbin
369 INSTALL := install
370
371 extra-installed         := $(patsubst $(obj)/%, $(DESTDIR)$(WRAPPER_OBJDIR)/%, $(extra-y))
372 hostprogs-installed     := $(patsubst %, $(DESTDIR)$(WRAPPER_BINDIR)/%, $(hostprogs-y))
373 wrapper-installed       := $(DESTDIR)$(WRAPPER_BINDIR)/wrapper
374 dts-installed           := $(patsubst $(obj)/dts/%, $(DESTDIR)$(WRAPPER_DTSDIR)/%, $(wildcard $(obj)/dts/*.dts))
375
376 all-installed           := $(extra-installed) $(hostprogs-installed) $(wrapper-installed) $(dts-installed)
377
378 quiet_cmd_mkdir           = MKDIR   $(patsubst $(INSTALL_HDR_PATH)/%,%,$@)
379       cmd_mkdir           = mkdir -p $@
380
381 quiet_cmd_install         = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_OBJDIR)/%,%,$@)
382       cmd_install         = $(INSTALL)  -m0644 $(patsubst $(DESTDIR)$(WRAPPER_OBJDIR)/%,$(obj)/%,$@) $@
383
384 quiet_cmd_install_dts     = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_DTSDIR)/%,dts/%,$@)
385       cmd_install_dts     = $(INSTALL)  -m0644 $(patsubst $(DESTDIR)$(WRAPPER_DTSDIR)/%,$(srctree)/$(obj)/dts/%,$@) $@
386
387 quiet_cmd_install_exe     = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,%,$@)
388       cmd_install_exe     = $(INSTALL)  -m0755 $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,$(obj)/%,$@) $@
389
390 quiet_cmd_install_wrapper = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,%,$@)
391       cmd_install_wrapper = $(INSTALL)  -m0755 $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,$(srctree)/$(obj)/%,$@) $@ ;\
392                                 sed -i $@ -e 's%^object=.*%object=$(WRAPPER_OBJDIR)%' \
393                                           -e 's%^objbin=.*%objbin=$(WRAPPER_BINDIR)%' \
394
395
396 $(DESTDIR)$(WRAPPER_OBJDIR) $(DESTDIR)$(WRAPPER_DTSDIR) $(DESTDIR)$(WRAPPER_BINDIR):
397         $(call cmd,mkdir)
398
399 $(extra-installed)      : $(DESTDIR)$(WRAPPER_OBJDIR)/% : $(obj)/% | $(DESTDIR)$(WRAPPER_OBJDIR)
400         $(call cmd,install)
401
402 $(hostprogs-installed)  : $(DESTDIR)$(WRAPPER_BINDIR)/% : $(obj)/% | $(DESTDIR)$(WRAPPER_BINDIR)
403         $(call cmd,install_exe)
404
405 $(dts-installed)        : $(DESTDIR)$(WRAPPER_DTSDIR)/% : $(srctree)/$(obj)/dts/% | $(DESTDIR)$(WRAPPER_DTSDIR)
406         $(call cmd,install_dts)
407
408 $(wrapper-installed): $(DESTDIR)$(WRAPPER_BINDIR) $(srctree)/$(obj)/wrapper | $(DESTDIR)$(WRAPPER_BINDIR)
409         $(call cmd,install_wrapper)
410
411 $(obj)/bootwrapper_install: $(all-installed)
412