14 years ago[ARM] 3290/1: Fix the FIFO size detection
Catalin Marinas [Wed, 1 Feb 2006 19:25:58 +0000]
[ARM] 3290/1: Fix the FIFO size detection

Patch from Catalin Marinas

AACI reports TX FIFO full after the first write to it if the AC97 is not
enabled. This patch enables the AC97 probing before the check for the TX
FIFO size. The patch also adds a warning if the TX FIFO size is not
multiple of 16.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

14 years agoMerge branch 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband
Linus Torvalds [Wed, 1 Feb 2006 05:37:33 +0000]
Merge branch 'for-linus' of /linux/kernel/git/roland/infiniband

14 years agoMerge branch 'upstream-fixes' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik...
Linus Torvalds [Wed, 1 Feb 2006 05:22:45 +0000]
Merge branch 'upstream-fixes' of /linux/kernel/git/jgarzik/libata-dev

14 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/dtor/input
Linus Torvalds [Wed, 1 Feb 2006 05:18:17 +0000]
Merge /pub/scm/linux/kernel/git/dtor/input

14 years agoMerge git://oss.sgi.com:8090/oss/git/xfs-2.6
Linus Torvalds [Wed, 1 Feb 2006 03:30:48 +0000]
Merge git://oss.sgi.com:8090/oss/git/xfs-2.6

14 years ago[PATCH] Make sure to always check upper bits of tv_nsec in timespec_valid.
Chris Wright [Wed, 1 Feb 2006 03:10:23 +0000]
[PATCH] Make sure to always check upper bits of tv_nsec in timespec_valid.

Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/davem/bnx2-2.6
Linus Torvalds [Wed, 1 Feb 2006 03:26:25 +0000]
Merge /pub/scm/linux/kernel/git/davem/bnx2-2.6

14 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Wed, 1 Feb 2006 03:24:43 +0000]
Merge /pub/scm/linux/kernel/git/davem/net-2.6

14 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6
Linus Torvalds [Wed, 1 Feb 2006 02:13:32 +0000]
Merge /pub/scm/linux/kernel/git/gregkh/pci-2.6

14 years ago[PATCH] PCI: handle bogus MCFG entries
Andi Kleen [Fri, 27 Jan 2006 01:03:50 +0000]
[PATCH] PCI: handle bogus MCFG entries

Handle more bogus MCFG entries

Some Asus P4 boards seem to have broken MCFG tables with
only a single entry for busses 0-0.  Special case these
and assume they mean all busses can be accessed.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] PCI: cyblafb: remove pci_module_init() return, really.
Arthur Othieno [Thu, 19 Jan 2006 02:12:57 +0000]
[PATCH] PCI: cyblafb: remove pci_module_init() return, really.

Richard Knutsson <ricknu-0@student.ltu.se> did the original pci_module_init()
cleanups:

    http://marc.theaimsgroup.com/?l=linux-kernel&m=113330872125068&w=2
    http://marc.theaimsgroup.com/?l=linux-kernel&m=113330888507321&w=2

Greg, on it's way upstream, pci_module_init() return sneaked back in for
cyblafb?

    http://marc.theaimsgroup.com/?l=linux-pci&m=113652969209562&w=2
    http://marc.theaimsgroup.com/?l=linux-pci&m=113683930220421&w=2

Remove for good.

Signed-off-by: Arthur Othieno <apgo@patchbomb.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] powerpc/PCI hotplug: shuffle error checking to better location.
linas@austin.ibm.com [Fri, 13 Jan 2006 00:35:23 +0000]
[PATCH] powerpc/PCI hotplug: shuffle error checking to better location.

Error checking is scattered through various layers of the dlpar code,
leading to a somewhat opaque code structure. This patch consolidates
error checking in one routine, simplifying the code a tad. There's
also some whitespace cleanup here too.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Acked-by: John Rose <johnrose@austin.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] powerpc/PCI hotplug: minor cleanup forward decls
linas@austin.ibm.com [Fri, 13 Jan 2006 00:32:58 +0000]
[PATCH] powerpc/PCI hotplug: minor cleanup forward decls

Minor cleanup. Move structure initializer to bottom of file,
this allows elimination of eyeball-strain-inducing forward
declarations.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Acked-by: John Rose <johnrose@austin.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] powerpc/PCI hotplug: cleanup: add prefix
linas@austin.ibm.com [Fri, 13 Jan 2006 00:31:01 +0000]
[PATCH] powerpc/PCI hotplug: cleanup: add prefix

Minor cleanup. Add the prefix rpaphp_* to several generic-sounding routines.
Remove rpaphp_remove_slot(), which is a one-liner.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Acked-by: John Rose <johnrose@austin.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] powerpc/PCI hotplug: merge rpaphp_enable_pci_slot()
linas@austin.ibm.com [Fri, 13 Jan 2006 00:28:22 +0000]
[PATCH] powerpc/PCI hotplug: merge rpaphp_enable_pci_slot()

Remove general baroqueness.  The function rpaphp_enable_pci_slot()
has a fairly simple logic structure, once all of the debug printk's
are removed. Its called from only one place, and that place also
has a very simple structure once he printk's are removed.  Merge
the two together.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Acked-by: John Rose <johnrose@austin.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] powerpc/PCI hotplug: de-convolute rpaphp_unconfig_pci_adap
linas@austin.ibm.com [Fri, 13 Jan 2006 00:26:27 +0000]
[PATCH] powerpc/PCI hotplug: de-convolute rpaphp_unconfig_pci_adap

Remove general baroqueness.  The function rpaphp_unconfig_pci_adapter()
is really just three lines of code, once all the dbg printks are removed.
And its called in only one place. So replace the call by the thre lines.
Also, provide proper semaphore locking in the affected function
disable_slot()

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Acked-by: John Rose <johnrose@austin.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] powerpc/PCI hotplug: remove remove_bus_device()
linas@austin.ibm.com [Fri, 13 Jan 2006 00:24:27 +0000]
[PATCH] powerpc/PCI hotplug: remove remove_bus_device()

The function rpaphp_eeh_remove_bus_device() is a dupe of
eeh_remove_bus_device(). Remove it.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Acked-by: John Rose <johnrose@austin.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] powerpc/PCI hotplug: merge config_pci_adapter
linas@austin.ibm.com [Fri, 13 Jan 2006 00:22:07 +0000]
[PATCH] powerpc/PCI hotplug: merge config_pci_adapter

Remove general baroqueness.  The function rpaphp_config_pci_adapter()
is really just one line of code, once all the dbg printks are removed.
And its called in only one place. So replace the call by the one line.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Acked-by: John Rose <johnrose@austin.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] powerpc/PCI hotplug: remove rpaphp_fixup_new_pci_devices()
linas@austin.ibm.com [Fri, 13 Jan 2006 00:20:26 +0000]
[PATCH] powerpc/PCI hotplug: remove rpaphp_fixup_new_pci_devices()

The function rpaphp_fixup_new_pci_devices() has been migrated to
pcibios_fixup_new_pci_devices() in
arch/powerpc/platforms/pseries/pci_dlpar.c
This patch removes the old version.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Acked-by: John Rose <johnrose@austin.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] powerpc/PCI hotplug: remove rpaphp_find_bus()
linas@austin.ibm.com [Fri, 13 Jan 2006 00:18:26 +0000]
[PATCH] powerpc/PCI hotplug: remove rpaphp_find_bus()

The function rpaphp_find_pci_bus() has been migrated to
pcibios_find_pci_bus() in arch/powerpc/platforms/pseries/pci_dlpar.c
This patch removes the old version.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Acked-by: John Rose <johnrose@austin.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] PCI Hotplug: shpchp: AMD POGO errata fix
Keck, David [Mon, 16 Jan 2006 21:22:36 +0000]
[PATCH] PCI Hotplug: shpchp: AMD POGO errata fix

This patch fixes the AMD POGO errata on the hotplug controller where the
platform will lock up or reboot if PERR/SERR generation is enabled and a
slot is sent an enable command.  This fix disables PERR/SERR generation
before a slot is sent the enable command by first saving related
registers, turning off SERR/PERR generation, enabling the slot, then
restoring the registers.

Signed-off-by: David Keck <david.keck@amd.com>
Cc: Kristen Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] PCI Hotplug: PCI panic on dlpar add (add pci slot to running partition)
linas [Thu, 12 Jan 2006 20:36:25 +0000]
[PATCH] PCI Hotplug: PCI panic on dlpar add (add pci slot to running partition)

Removing and then adding a PCI slot to a running partition results in
a kernel panic. The current code attempts to add iospace for an entire
root bus, which is inappropriate, and silently fails.  When a pci device
tries to use the iospace, a page fault is taken, as the iospace had not
been mapped, and of course the page fault cannot be resolved.

This only occurs for PCI adapters using pio, which may be why it hadn't
been seen earlier (this seems to have been broken for a while).
This patch has survived testing of dozens of slot add and removes.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Acked-by: John Rose <johnrose@austin.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] PCI Hotplug/powerpc: module build break
linas [Tue, 10 Jan 2006 21:15:47 +0000]
[PATCH] PCI Hotplug/powerpc: module build break

The RPAPHP hoplug driver will not build as a module, because it calls
on pci_claim_resource(), which is not exported. This exports the symbol.
Problem reported by Olaf Hering <olh@suse.de>

A grep indicates that building drivers/parisc/lba_pci.c
would have trouble building as a module for the same reason.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] PCI: pci_ids: remove duplicates gathered during merge period
Grant Coady [Sun, 15 Jan 2006 05:21:27 +0000]
[PATCH] PCI: pci_ids: remove duplicates gathered during merge period

pci_ids.h: remove duplicates.  Compile tested allmodconfig.

Signed-off-by: Grant Coady <gcoady@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] PCI: restore 2 missing pci ids
Mark Rustad [Fri, 6 Jan 2006 06:47:29 +0000]
[PATCH] PCI: restore 2 missing pci ids

Somewhere between 2.6.14 and 2.6.15-rc3, some PCI ids were apparently
removed.  The ecc.c module, which is not a part of the kernel.org tree, but
included in some distributions, fails to compile.

Signed-off-by: Mark Rustad <mrustad@mac.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] PCI Hotplug: fix up Kconfig help text
Pavel Machek [Mon, 9 Jan 2006 15:16:00 +0000]
[PATCH] PCI Hotplug: fix up Kconfig help text

Remove reference to pcihpfs that no longer exists.

Signed-off-by: Pavel Machek <pavel@suse.cz>

14 years ago[PATCH] PCI Hotplug: fix up coding style issues
Pavel Machek [Sun, 8 Jan 2006 19:11:59 +0000]
[PATCH] PCI Hotplug: fix up coding style issues

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] PCI: make it easier to see that set_msi_affinity() is used
Grant Grundler [Wed, 4 Jan 2006 02:51:46 +0000]
[PATCH] PCI: make it easier to see that set_msi_affinity() is used

I missed this usage in drivers/pci/msi.h:

#ifdef CONFIG_SMP
#define set_msi_irq_affinity    set_msi_affinity
#else
#define set_msi_irq_affinity    NULL
#endif

set_msi_affinity() is declared and exclusively used in msi.c.
Here's a better way so (hopefully) history doesn't repeat itself.

Signed-off-by: Grant Grundler <iod00d@hp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] PCI: drivers/pci/pci.c: #if 0 pci_find_ext_capability()
Adrian Bunk [Fri, 6 Jan 2006 02:25:37 +0000]
[PATCH] PCI: drivers/pci/pci.c: #if 0 pci_find_ext_capability()

This patch #if 0's the unused global function pci_find_ext_capability().

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] PCI: irq and pci_ids: patch for Intel ICH8
Jason Gaston [Mon, 9 Jan 2006 18:53:45 +0000]
[PATCH] PCI: irq and pci_ids: patch for Intel ICH8

This patch adds the Intel ICH8 DID's to the irq.c and pci_ids.h files.

Signed-off-by: Jason Gaston <Jason.d.gaston@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] pci: Schedule removal of pci_module_init
Richard Knutsson [Sat, 3 Dec 2005 01:34:12 +0000]
[PATCH] pci: Schedule removal of pci_module_init

Scheduled the removal of pci_module_init.

Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] PCI: schedule PCI_LEGACY_PROC for removal
Adrian Bunk [Thu, 29 Dec 2005 19:07:25 +0000]
[PATCH] PCI: schedule PCI_LEGACY_PROC for removal

PCI_LEGACY_PROC is deprecated since 2.5.53 in favor of lspci(8).

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[DCCP] ipv6: dccp_v6_send_response() has a DST leak too.
David S. Miller [Wed, 1 Feb 2006 01:53:37 +0000]
[DCCP] ipv6: dccp_v6_send_response() has a DST leak too.

It was copy&pasted from tcp_v6_send_synack() which has
a DST leak recently fixed by Eric W. Biederman.

So dccp_v6_send_response() needs the same fix too.

Signed-off-by: David S. Miller <davem@davemloft.net>

14 years ago[IPV6] tcp_v6_send_synack: release the destination
Eric W. Biederman [Wed, 1 Feb 2006 01:51:44 +0000]
[IPV6] tcp_v6_send_synack: release the destination

This patch fix dst reference counting in tcp_v6_send_synack

Analysis:
Currently tcp_v6_send_synack is never called with a dst entry
so dst always comes in as NULL.

ip6_dst_lookup calls ip6_route_output which calls dst_hold
before it returns the dst entry.   Neither xfrm_lookup
nor tcp_make_synack consume the dst entry so we still have
a dst_entry with a bumped refrence count at the end of
this function.

Therefore we need to call dst_release just before we return
just like tcp_v4_send_synack does.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

14 years ago[NET]: Do not export inet_bind_bucket_create twice.
Sam Ravnborg [Wed, 1 Feb 2006 01:47:02 +0000]
[NET]: Do not export inet_bind_bucket_create twice.

inet_bind_bucket_create was exported twice.  Keep the export in the
file where inet_bind_bucket_create is defined.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

14 years ago[BRIDGE]: Fix device delete race.
Stephen Hemminger [Wed, 1 Feb 2006 01:44:07 +0000]
[BRIDGE]: Fix device delete race.

This is a simpler fix for the two races in bridge device removal.
The Xen race of delif and notify is managed now by a new deleted flag.
No need for barriers or other locking because of rtnl mutex.

The del_timer_sync()'s are unnecessary, because br_stp_disable_port
delete's the timers, and they will finish running before RCU callback.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

14 years ago[IPV4]: Always set fl.proto in ip_route_newports
Patrick McHardy [Wed, 1 Feb 2006 01:35:35 +0000]
[IPV4]: Always set fl.proto in ip_route_newports

ip_route_newports uses the struct flowi from the struct rtable returned
by ip_route_connect for the new route lookup and just replaces the port
numbers if they have changed. If an IPsec policy exists which doesn't match
port 0 the struct flowi won't have the proto field set and no xfrm lookup
is done for the changed ports.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

14 years ago[PATCH] USB: gadget zero and dma-coherent buffers
David Brownell [Fri, 20 Jan 2006 22:38:49 +0000]
[PATCH] USB: gadget zero and dma-coherent buffers

This makes sure that the correct length is reported when freeing
a dma-coherent buffer; some platforms complain if that's wrong.
It also makes two parameters readonly in sysfs, as they're not
safe to change while tests are running.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] USB: USB authentication states
David Brownell [Fri, 20 Jan 2006 22:44:12 +0000]
[PATCH] USB: USB authentication states

Another hook needed for wireless USB:  there are states associated with the
device authentication protocol.  Wireless devices must authenticate using
the host system's keystore.

Note that wired connections could also use this authentication protocol, if
for no other reason than to support the most secure "simple" key exchange
protocols for wireless devices.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] USB: yealink printk warning fix
Andrew Morton [Fri, 20 Jan 2006 07:59:12 +0000]
[PATCH] USB: yealink printk warning fix

drivers/usb/input/yealink.c: In function `usb_probe':
drivers/usb/input/yealink.c:910: warning: int format, different type arg (arg 4)

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] USB: libusual: fix warning on 64bit boxes
Alan Cox [Tue, 17 Jan 2006 23:39:25 +0000]
[PATCH] USB: libusual: fix warning on 64bit boxes

We cast an int to a void * which not unreasonably makes gcc suspicious.
We don't actually care what type "type" is so use unsigned long so it
matches pointer length on all platforms.

Signed-off-by: Alan Cox <alan@redhat.com>
Acked-by: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] USB: arm26: fix compilation of drivers/usb/core/message.c
Alexey Dobriyan [Wed, 18 Jan 2006 21:06:07 +0000]
[PATCH] USB: arm26: fix compilation of drivers/usb/core/message.c

drivers/usb/core/message.c:395: error: invalid use of undefined type `struct scatterlist'

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] USB: Au1xx0: replace casual readl() with au_readl() in the drivers
Sergei Shtylylov [Fri, 6 Jan 2006 06:50:39 +0000]
[PATCH] USB: Au1xx0: replace casual readl() with au_readl() in the drivers

au_readl() does needed byteswapping, etc.

Cc: Takashi Iwai <tiwai@suse.de>
Cc: Jaroslav Kysela <perex@perex.cz>
Acked-by: Jordan Crouse <jordan.crouse@amd.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] USB: remove extra newline in hid_init_reports
Olaf Hering [Fri, 6 Jan 2006 11:45:28 +0000]
[PATCH] USB: remove extra newline in hid_init_reports

The warn() macro in include/linux/usb.h adds a newline.

Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] USB: drivers/usb/media/ov511.c: remove hooks for the decomp module
Adrian Bunk [Fri, 6 Jan 2006 02:28:52 +0000]
[PATCH] USB: drivers/usb/media/ov511.c: remove hooks for the decomp module

- the decomp module is not intended for inclusion into the kernel
- people using the decomp module from upstream will usually simply use
  the complete upstream 2.xx driver

Therefore, there seems to be no good reason spending some bytes of
kernel memory for hooks for this module.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Mark McClelland <mark@ovcam.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] USB: drivers/usb/media/w9968cf.c: remove hooks for the vpp module
Adrian Bunk [Sun, 8 Jan 2006 23:43:39 +0000]
[PATCH] USB: drivers/usb/media/w9968cf.c: remove hooks for the vpp module

- the w9968cf-vpp module is not intended for inclusion into the kernel
- the upstream w9968cf package shipping the w9968cf-vpp module suggests
  to simply replace the w9968cf module shipped with the kernel

Therefore, there seems to be no good reason spending some bytes of
kernel memory for hooks for the w9968cf-vpp module.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Luca Risolia <luca.risolia@studio.unibo.it>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] USB EHCI: fix gfp_t sparse warning
Randy Dunlap [Mon, 26 Dec 2005 03:27:18 +0000]
[PATCH] USB EHCI: fix gfp_t sparse warning

Fix sparse warning:
drivers/usb/host/ehci-hcd.c:719:35: warning: incorrect type in argument 3 (different base types)
drivers/usb/host/ehci-hcd.c:719:35:    expected unsigned int [unsigned] mem_flags
drivers/usb/host/ehci-hcd.c:719:35:    got restricted unsigned int [usertype] mem_flags

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] USB: Remove LINUX_VERSION_CODE check in pwc/pwc-ctrl.c
Eric Sesterhenn / snakebyte [Wed, 4 Jan 2006 17:10:44 +0000]
[PATCH] USB: Remove LINUX_VERSION_CODE check in pwc/pwc-ctrl.c

this patch removes compatibility with 2.4 kernel, which makes
the code much easier to read.

Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] USB: gadgetfs: set "zero" flag for short control-IN response
Alan Stern [Tue, 3 Jan 2006 15:30:31 +0000]
[PATCH] USB: gadgetfs: set "zero" flag for short control-IN response

This patch (as622) makes gadgetfs set the "zero" flag for control-IN
responses, when the length of the response is shorter than the length of
the request.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: David Brownell <david-b@pacbell.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] USB: isp116x-hcd: replace mdelay() by msleep()
Olav Kongas [Tue, 27 Dec 2005 14:04:02 +0000]
[PATCH] USB: isp116x-hcd: replace mdelay() by msleep()

Replace mdelay() by msleep() in bus_suspend(); the rest of the system will
gain 7ms. The related code is reorganized to minimize the number of
locking/unlocking calls.

The last hunk of the patch is the formatting change by Lindent.

Signed-off-by: Olav Kongas <ok@artecdesign.ee>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] USB: add might_sleep() to usb_unlink_urb() to warn developers
Greg Kroah-Hartman [Mon, 23 Jan 2006 22:17:21 +0000]
[PATCH] USB: add might_sleep() to usb_unlink_urb() to warn developers

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] USB: net2280 warning fix
David Brownell [Thu, 19 Jan 2006 07:55:08 +0000]
[PATCH] USB: net2280 warning fix

For some reason alpha doesn't include <linux/dma-mapping.h> where other
architectures do; this makes net2280 include it explicitly.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] USB: remove some left over devfs droppings hanging around in the usb drivers
Greg Kroah-Hartman [Wed, 18 Jan 2006 22:36:58 +0000]
[PATCH] USB: remove some left over devfs droppings hanging around in the usb drivers

As there is no more usb devfs support, these bits would just confuse
people.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] USB: UHCI: No FSBR until device is configured
Alan Stern [Mon, 23 Jan 2006 22:17:21 +0000]
[PATCH] USB: UHCI: No FSBR until device is configured

Some USB devices don't enumerate well with FSBR turned on.  This patch
keeps devices on the low-speed part of the schedule (which doesn't use
FSBR) until they have been fully configured.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] USB: EHCI, another full speed iso fix
Clemens Ladisch [Sun, 22 Jan 2006 18:32:49 +0000]
[PATCH] USB: EHCI, another full speed iso fix

This patch adds a reinitializion for the uf variable that got modified
by the preceding start-split bandwidth check.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] USB HID: add blacklist entry for HP keyboard
Vojtech Pavlik [Thu, 26 Jan 2006 06:44:31 +0000]
[PATCH] USB HID: add blacklist entry for HP keyboard

My earlier experiment (adding a clear-halt for the interrupt-in
endpoint)  failed.  It turns out that it does cause problems for other
devices.  And it wasn't needed anyway; a simple blacklist entry was
enough to get my HP keyboard working.

This patch (as643) removes the clear-halt call and adds the blacklist
entry.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] USB: add new auerswald device ids
Andrew Morton [Tue, 17 Jan 2006 23:37:22 +0000]
[PATCH] USB: add new auerswald device ids

Add device support for a couple more Auerswald TK-devices.

Via Thomas Jackle <dj-tj@gmx.de>, typed in from
http://bugzilla.kernel.org/show_bug.cgi?id=5908.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] UEAGLE : cmv name bug (was cosmetic)
matthieu castet [Wed, 18 Jan 2006 06:39:27 +0000]
[PATCH] UEAGLE : cmv name bug (was cosmetic)

this patch correct a possible bug with cmv_name being static. If there
is 2 modems and the driver is scheduled when filling cmv_name this could
result with garbage in cmv_name. We allocate cmv_name on the stack but
with a small size in order to avoid that.

Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] UEAGLE : cosmetic
matthieu castet [Wed, 18 Jan 2006 06:38:37 +0000]
[PATCH] UEAGLE : cosmetic

this patch is purely cosmetic. There is :
- indentation cleaning
- unneeded cast removing
- comments cleaning

Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] UEAGLE : add iso support
matthieu castet [Wed, 18 Jan 2006 06:38:19 +0000]
[PATCH] UEAGLE : add iso support

This patch adds the support for isochronous pipe.

A new module parameter is added to select iso mode.  It is set to iso by
default because bulk mode doesn't work well at high speed rate (>3 Mbps
for upload).

We use UDSL_IGNORE_EILSEQ flags because ADI firmware doesn't reply to
ISO IN when it has nothing to send [1].

[1]
from cypress datasheet :

The ISOSEND0 Bit (bit 7 in the USBPAIR Register) is used when the EZ-USB
FX chip receives an isochronous IN token while the IN FIFO is empty. If
ISOSEND0=0 (the default value), the USB core does not respond to the IN
token. If ISOSEND0=1, the USB core sends a zero-length data packet in
response to the IN token. The action to take depends on the overall
system design. The ISOSEND0 Bit applies to all of the isochronous IN
endpoints, IN-8 through IN-15.

Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] USBATM: semaphore to mutex conversion
Arjan van de Ven [Fri, 13 Jan 2006 14:52:55 +0000]
[PATCH] USBATM: semaphore to mutex conversion

This is the usbatm part of the Arjan, Jes and Ingo
mass semaphore to mutex conversion, reworked to apply on top
of the patches I just sent to you.  This time, with correct
attribution and signed-off lines.

Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Duncan Sands <baldrick@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] USBATM: -EILSEQ workaround
Duncan Sands [Fri, 13 Jan 2006 10:12:58 +0000]
[PATCH] USBATM: -EILSEQ workaround

Don't throttle on -EILSEQ urb status if requested by a minidriver.
It seems the ueagle modems are buggy, giving -EILSEQ when they
have no data to send.  The ueagle change will be sent separately
by the ueagle guys.  Patch by Matthieu Castet.

Signed-off-by: Duncan Sands <baldrick@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] USBATM: bump version numbers
Duncan Sands [Fri, 13 Jan 2006 10:08:05 +0000]
[PATCH] USBATM: bump version numbers

Signed-off-by: Duncan Sands <baldrick@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] USBATM: handle urbs containing partial cells
Duncan Sands [Fri, 13 Jan 2006 10:06:46 +0000]
[PATCH] USBATM: handle urbs containing partial cells

The receive logic has always assumed that urbs contain an integral
number of ATM cells, which is a bit naughty, though it never caused
any problems with bulk transfers.  Isochronous urbs spank us soundly
for this.  Fixed thanks to this patch, mostly by Stanislaw Gruszka.

Signed-off-by: Duncan Sands <baldrick@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] USBATM: allow isochronous transfer
Duncan Sands [Fri, 13 Jan 2006 09:59:23 +0000]
[PATCH] USBATM: allow isochronous transfer

While the usbatm core has had some support for using isoc urbs
for some time, there was no way for users to turn it on.  While
use of isoc transfer should still be considered experimental, it
now works well enough to let users turn it on.  Minidrivers signal
to the core that they want to use isoc transfer by setting the new
UDSL_USE_ISOC flag.  The speedtch minidriver gets a new module
parameter enable_isoc (defaults to false), plus some logic that
checks for the existence of an isoc receive endpoint (not all
speedtouch modems have one).

Signed-off-by: Duncan Sands <baldrick@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] USBATM: measure buffer size in bytes; force valid sizes
Duncan Sands [Fri, 13 Jan 2006 09:52:38 +0000]
[PATCH] USBATM: measure buffer size in bytes; force valid sizes

Change the module parameters rcv_buf_size and snd_buf_size to
specify buffer sizes in bytes rather than ATM cells.  Since
there is some danger that users may not notice this change,
the parameters are renamed to rcv_buf_bytes etc.  The transmit
buffer needs to be a multiple of the ATM cell size in length,
while the receive buffer should be a multiple of the endpoint
maxpacket size (this wasn't enforced before, which causes trouble
with isochronous transfers), so enforce these restrictions.  Now
that the usbatm probe method inspects the endpoint maxpacket size,
minidriver bind routines need to set the correct alternate setting
for the interface in their bind routine.  This is the reason for
the speedtch changes.

Signed-off-by: Duncan Sands <baldrick@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] USBATM: use dev_kfree_skb_any rather than dev_kfree_skb
Duncan Sands [Fri, 13 Jan 2006 09:13:19 +0000]
[PATCH] USBATM: use dev_kfree_skb_any rather than dev_kfree_skb

In one spot (usbatm_cancel_send) we were calling dev_kfree_skb with irqs
disabled.  This mistake is just too easy to make, so systematically use
dev_kfree_skb_any rather than dev_kfree_skb.

Signed-off-by: Duncan Sands <baldrick@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] USBATM: return correct error code when out of memory
Duncan Sands [Fri, 13 Jan 2006 09:07:08 +0000]
[PATCH] USBATM: return correct error code when out of memory

We weren't always returning -ENOMEM.

Signed-off-by: Duncan Sands <baldrick@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] USBATM: shutdown open connections when disconnected
Duncan Sands [Fri, 13 Jan 2006 09:05:15 +0000]
[PATCH] USBATM: shutdown open connections when disconnected

This patch causes vcc_release_async to be applied to any open
vcc's when the modem is disconnected.  This signals a socket
shutdown, letting the socket user know that the game is up.
I wrote this patch because of reports that pppd would keep
connections open forever when the modem is disconnected.
This patch does not fix that problem, but it's a step in the
right direction.  It doesn't help because the pppoatm module
doesn't yet monitor state changes on the ATM socket, so simply
never realises that the ATM connection has gone down (meaning
it doesn't tell the ppp layer).  But at least there is a socket
state change now.  Unfortunately this patch may create problems
for those rare users like me who use routed IP or some other
non-ppp connection method that goes via the ATM ARP daemon: the
daemon is buggy, and with this patch will crash when the modem
is disconnected.  Users with a buggy atmarpd can simply restart
it after disconnecting the modem.

Signed-off-by: Duncan Sands <baldrick@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] USBATM: xusbatm rewrite
Duncan Sands [Fri, 13 Jan 2006 08:48:36 +0000]
[PATCH] USBATM: xusbatm rewrite

The xusbatm driver is for otherwise unsupported modems.
All it does is grab hold of a user-specified set of
interfaces - the generic usbatm core methods (hopefully)
do the rest.  As Aurelio Arroyo discovered when he tried
to use xusbatm (big mistake!), the interface grabbing logic
was completely borked.  Here is a rewrite that works.

Signed-off-by: Duncan Sands <baldrick@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] USBATM: kzalloc conversion
Duncan Sands [Fri, 13 Jan 2006 08:38:22 +0000]
[PATCH] USBATM: kzalloc conversion

Convert kmalloc + memset to kzalloc.

Signed-off-by: Duncan Sands <baldrick@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] USBATM: remove .owner
Duncan Sands [Fri, 13 Jan 2006 08:36:20 +0000]
[PATCH] USBATM: remove .owner

Remove the unused .owner field in struct usbatm_driver.

Signed-off-by: Duncan Sands <baldrick@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] USBATM: add flags field
Duncan Sands [Tue, 17 Jan 2006 10:16:13 +0000]
[PATCH] USBATM: add flags field

Have minidrivers and the core signal special requirements
using a flags field in struct usbatm_data.  For the moment
this is only used to replace the need_heavy_init bind
parameter, but there'll be new flags in later patches.

Signed-off-by: Duncan Sands <baldrick@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] USBATM: trivial modifications
Duncan Sands [Tue, 17 Jan 2006 10:15:13 +0000]
[PATCH] USBATM: trivial modifications

Formatting, changes to variable names, comments, log level changes,
printk rate limiting.

Signed-off-by: Duncan Sands <baldrick@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] USB: Add ET61X[12]51 Video4Linux2 driver
Luca Risolia [Wed, 11 Jan 2006 02:06:59 +0000]
[PATCH] USB: Add ET61X[12]51 Video4Linux2 driver

This patch adds a Video4Linux2 driver giving support
to ET61X151 and ET61X251 PC Camera Controllers made by
Etoms Electronics.

Signed-off-by: Luca Risolia <luca.risolia@studio.unibo.it>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] USB: SN9C10x driver updates
Luca Risolia [Fri, 13 Jan 2006 17:19:43 +0000]
[PATCH] USB: SN9C10x driver updates

SN9C10x driver updates:

- Use kzalloc() instead of kmalloc()
- Move some macro definitions from sn9c102.h to sn9c102_core.c
- Use vfree() and vmalloc_32() instead of rvfree() and rvmalloc()
- Fix mmap() sys call
- Documentation updates

Signed-off-by: Luca Risolia <luca.risolia@studio.unibo.it>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] USB: cp2101 Add new device IDs
Craig Shelley [Fri, 20 Jan 2006 00:06:19 +0000]
[PATCH] USB: cp2101 Add new device IDs

The attached patch adds four new device IDs for the CP2101 driver.
Also 3 tab characters have been removed from device ID table.

Signed-off-by: Craig Shelley <craig@microtron.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] USB: add new pl2303 device ids
Denis MONTERRAT [Thu, 19 Jan 2006 13:52:38 +0000]
[PATCH] USB: add new pl2303 device ids

Signed-off-by: FALIPOU F Developer <fred.falipou@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] USB: pl2303: Added support for CA-42 clone cable
Martin Gingras [Mon, 9 Jan 2006 17:35:41 +0000]
[PATCH] USB: pl2303: Added support for CA-42 clone cable

Added support for CA-42 clone cable (www.ca-42.com)

Signed-off-by: Martin Gingras <martin.gingras@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] USB: touchkitusb.c (eGalax driver) fix
Juergen Schindele [Mon, 9 Jan 2006 07:51:48 +0000]
[PATCH] USB: touchkitusb.c (eGalax driver) fix

This patch corrects the URB initialisation for transfers
like this is done in other drivers too.
Without this patch no data was transmitted on a PXA270 OHCI
platform. May apply to others too.

Signed-off-by: Juergen Schindele <schindele@nentec.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] USB: asix - Add device IDs for 0G0 Cable Ethernet
David Hollis [Thu, 5 Jan 2006 19:39:49 +0000]
[PATCH] USB: asix - Add device IDs for 0G0 Cable Ethernet

Add device IDs for the 0G0 Cable Ethernet device as reported by
Charles Lepple <clepple@gmail.com>.

Signed-off-by: David Hollis <dhollis@davehollis.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] USB: SN9C10x driver updates and bugfixes
Luca Risolia [Thu, 5 Jan 2006 18:14:04 +0000]
[PATCH] USB: SN9C10x driver updates and bugfixes

SN9C10x driver updates and bugfixes.

Changes: + new, - removed, * cleanup, @ bugfix:

@ fix poll()
@ Remove bad get_ctrl()'s
* Reduce ioctl stack usage
* Remove final ";" from some macro definitions
* Better support for SN9C103
+ Add sn9c102_write_regs()
+ Add 0x0c45/0x602d to the list of SN9C10x based devices
+ Add support for OV7630 image sensors
+ Provide support for the built-in microphone interface of the SN9C103
+ Documentation updates
+ Add 0x0c45/0x602e to the list of SN9C10x based devices

Signed-off-by: Luca Risolia <luca.risolia@studio.unibo.it>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] USB: usb-storage support for SONY DSC-T5 still camera
Alexandre Duret-Lutz [Tue, 27 Dec 2005 07:04:24 +0000]
[PATCH] USB: usb-storage support for SONY DSC-T5 still camera

I've been offered a nice Sony DSC-T5 digital camera, with a USB connection.
Unfortunately it is not recognized by Linux 2.6.14.4's usb-storage.

With the following change I'm able to mount and read my pictures:

Signed-off-by: Phil Dibowitz <phil@ipom.com>

14 years ago[PATCH] USB: fix oops in acm disconnect
Oliver Neukum [Sun, 8 Jan 2006 11:39:13 +0000]
[PATCH] USB: fix oops in acm disconnect

this fixes an oops with disconnection in acm.

Signed-off-by: Oliver Neukum <oliver@neukum.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] USB: cleanup of usblp
Oliver Neukum [Sat, 7 Jan 2006 20:35:20 +0000]
[PATCH] USB: cleanup of usblp

this fixes
-potential hang by disconnecting through usbfs
-kzalloc
-general cleanup
-micro optimisation in interrupt handlers

It compiles and I am printing.

Signed-off-by: Oliver Neukum <oliver@neukum.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] USB: usb-storage: Add support for Rio Karma
Matthew Dharm [Sat, 31 Dec 2005 03:06:53 +0000]
[PATCH] USB: usb-storage: Add support for Rio Karma

This patch from Bob Copeland adds support for the Rio Karma portable
digital audio player to the usb-storage driver.  The only thing needed to
support this device is a one-time (per plugin) init command which is sent
to the device.

Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: Matthew Dharm <mdharm-usb@one-eyed-alien.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] drivers/usb/input/yealink.c: Cleanup device matching code
Henk [Fri, 30 Dec 2005 18:41:11 +0000]
[PATCH] drivers/usb/input/yealink.c: Cleanup device matching code

This should fix things mentioned below:

"I was curious why my firewall was loading a 'phone driver'.
It turns out that the probing in the yealink driver is
a little too assuming..

static struct usb_device_id usb_table [] = {
    { USB_INTERFACE_INFO(USB_CLASS_HID, 0, 0) },
    { }
};

So it picked up my UPS, and loaded the driver.
Whilst no harm came, because it later checks the vendor/product IDs,
this driver should probably be rewritten to only probe
for the device IDs it actually knows about.

Dave"

Signed-off-by: Henk Vergonet <henk.vergonet@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] USB: ftdi: Two new ATIK based USB astronomical CCD cameras
Rui Santos [Mon, 9 Jan 2006 13:12:40 +0000]
[PATCH] USB: ftdi: Two new ATIK based USB astronomical CCD cameras

Documentation: Specify grayscale specification on ATIK-ATK16
   and ATIK-ATK16HR comments.
New: Add ProductID and VendorID for devices ATIK-ATK16C and
   ATIK-ATK16HRC. These devices are also USB Astronomical CCD
   cameras that work through an FTDI 245BM chip, share the
   same base hardware but, it has a colour CCD chip instead
   of a grayscale one.

Signed-off-by: Rui Santos <rsantos@grupopie.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] USB: ftdi_sio: new PID for PCDJ DAC2
Wouter Paesen [Tue, 3 Jan 2006 13:30:31 +0000]
[PATCH] USB: ftdi_sio: new PID for PCDJ DAC2

The attached patch adds a new PID for the ftdi_sio driver.  It will
enable support for PC-DJ's DAC-2 controller module
(more information on http://www.pcdjhardware.com/DAC2.asp)

Signed-off-by: Wouter Paesen <wouter@kangaroot.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] USB: ftdi_sio: new IDs for Westrex devices
Ian Abbott [Mon, 9 Jan 2006 17:11:40 +0000]
[PATCH] USB: ftdi_sio: new IDs for Westrex devices

This patch adds two new devices to the ftdi_sio driver's device ID
table.  The device IDs were supplied by Cory Lee to support two POS
printers made by Westrex International (Model 777 and Model 8900F).

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] USB: new id for ftdi_sio.c and ftdi_sio.h
Louis Nyffenegger [Thu, 5 Jan 2006 16:20:37 +0000]
[PATCH] USB: new id for ftdi_sio.c and ftdi_sio.h

this patch includes the Vendor Id for a optic fiber to USB device named
TTUSB from thought Technology. It's just add the vendor Id to
ftdi_sio.h and add the Vendor ID and model Id to table_combined.

Signed-off-by: Louis Nyffenegger <louis.nyffenegger@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] USB: ub 05 Bulk reset
Pete Zaitcev [Thu, 5 Jan 2006 08:26:30 +0000]
[PATCH] USB: ub 05 Bulk reset

For crying out loud, they have devices which do not like port resets.
So, do what usb-storage does and try both bulk and port resets.
We start with a port reset (which usb-storage does at the end of transport),
then do a Bulk reset, then a port reset again. This seems to work for me.

The code is getting dirtier and dirtier here, but I swear that I'll
do something about it (see those two new XXX). Honest.

Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] USB: ub 04 Loss of timer and a hang
Pete Zaitcev [Thu, 5 Jan 2006 08:14:02 +0000]
[PATCH] USB: ub 04 Loss of timer and a hang

If SCSI commands are submitted while other commands are still processed,
the dispatch loop turns, and we stop the work_timer. Then, if URB fails
to complete, ub hangs until the device is unplugged.

This does not happen often, becase we only allow one SCSI command per
block device, but does happen (on multi-LUN devices, for example).

The fix is to stop timer only when we actually going to change the state.

The nicest code would be to have the timer stopped in URB callback, but
this is impossible, because it can be called from inside a timer, through
the urb_unlink. Then we get BUG in timer.c:cascade(). So, we do it a
little dirtier.

Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] USB: ub 03 Oops with CFQ
Pete Zaitcev [Wed, 28 Dec 2005 22:22:17 +0000]
[PATCH] USB: ub 03 Oops with CFQ

The blk_cleanup_queue does not necesserily destroy the queue. When we
destroy the corresponding ub_dev, it may leave the queue spinlock pointer
dangling.

This patch moves spinlocks from ub_dev to static memory. The locking
scheme is not changed. These spinlocks are still separate from the ub_lock.

Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] USB: fix ehci early handoff issues warning
Andrew Morton [Wed, 25 Jan 2006 01:42:24 +0000]
[PATCH] USB: fix ehci early handoff issues warning

Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] USB: fix EHCI early handoff issues
David Brownell [Tue, 24 Jan 2006 15:15:30 +0000]
[PATCH] USB: fix EHCI early handoff issues

This moves the previously widely-used ehci-pci.c BIOS handoff
code into the pci-quirks.c file, replacing the less widely used
"early handoff" version that seems to cause problems lately.

One notable change:  the "early handoff" version always enabled
an SMI IRQ ... and did so even if the pre-Linux code said it was
not using EHCI (and not expecting EHCI SMIs).  Looks like a goof
in a workaround for some unknown BIOS version.

This merged version only forcibly enables those IRQs when pre-Linux
code says it's using EHCI.  And now it always forces them off "just
in case".

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[XFS] Fix regression in xfs_buf_rele dealing with non-hashed buffers, as
Nathan Scott [Wed, 1 Feb 2006 01:14:52 +0000]
[XFS] Fix regression in xfs_buf_rele dealing with non-hashed buffers, as
occur during log replay.  Novell bug 145204, Fedora bug 177848.

SGI-PV: 948860
SGI-Modid: xfs-linux-melb:xfs-kern:25064a

Signed-off-by: Nathan Scott <nathans@sgi.com>

14 years ago[XFS] Interim solution for attribute insertion failure during file
Yingping Lu [Wed, 1 Feb 2006 01:14:34 +0000]
[XFS] Interim solution for attribute insertion failure during file
creation due to ENOSPC. The current solution removes the inode when the
attribute insertion fails. Long term solution would be to make the inode
creation and attribute insertion atomic.

SGI-PV: 947610
SGI-Modid: xfs-linux-melb:xfs-kern:205193a

Signed-off-by: Yingping Lu <yingping@sgi.com>
Signed-off-by: Nathan Scott <nathans@sgi.com>

14 years ago[SUNGEM]: Unbreak Sun GEM chips.
David S. Miller [Wed, 1 Feb 2006 01:09:20 +0000]
[SUNGEM]: Unbreak Sun GEM chips.

Revert: 40727198bfb2ce5842a6e8c7f89cf8a40ff7bf14

These PHY changes hang the sungem driver on startup with Sun chips on
sparc64.  Hopefully we can redo these changes in a way that doesn't
break non-Apple systems.

Signed-off-by: David S. Miller <davem@davemloft.net>

14 years ago[PATCH] "Fix uidhash_lock <-> RXU deadlock" fix
Andrew Morton [Wed, 1 Feb 2006 00:34:26 +0000]
[PATCH] "Fix uidhash_lock <-> RXU deadlock" fix

I get storms of warnings from local_bh_enable().  Better-tested patches,
please.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>