13 years agoext2: fix return of uninitialised variable
Andrew Morton [Wed, 27 Jun 2007 21:10:08 +0000]
ext2: fix return of uninitialised variable

gcc correctly says

fs/ext2/super.c: In function 'ext2_remount':
fs/ext2/super.c:1055: warning: 'err' may be used uninitialized in this function

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agomips-jazz: correct flags for timer io resource
Alexey Dobriyan [Wed, 27 Jun 2007 21:10:06 +0000]
mips-jazz: correct flags for timer io resource

arch/mips/jazz/setup.c:55:4: error: Initializer entry defined twice

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agow1_therm_read_bin: don't call flush_signals()
Evgeniy Polyakov [Wed, 27 Jun 2007 21:10:04 +0000]
w1_therm_read_bin: don't call flush_signals()

This can disrupt userspace signal management.

Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Cc: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agorelayfs: fix overwrites
Masami Hiramatsu [Wed, 27 Jun 2007 21:10:04 +0000]
relayfs: fix overwrites

When I use relayfs with "overwrite" mode, read() still sets incorrect
number of consumed bytes.

Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Tom Zanussi <zanussi@us.ibm.com>
Acked-by: David Wilder <dwilder@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agorelay file read: start-pos fix
David Wilder [Wed, 27 Jun 2007 21:10:03 +0000]
relay file read: start-pos fix

Fix a bug in the relay read interface causing the number of consumed bytes
to be set incorrectly.

Signed-off-by: Tom Zanussi <zanussi@us.ibm.com>
Signed-off-by: David Wilder <dwilder@us.ibm.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agoALSA: use __devexit_p
Randy Dunlap [Wed, 27 Jun 2007 21:10:02 +0000]
ALSA: use __devexit_p

Change __devexit to __devexit_p:
sound/isa/opl3sa2.c:956: error: expected expression before '__attribute__'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Jaroslav Kysela <perex@suse.cz>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agoDocumentation/HOWTO: update URLs of git trees
Stefan Richter [Wed, 27 Jun 2007 21:10:01 +0000]
Documentation/HOWTO: update URLs of git trees

Also, remove outdated 1394 tree and mention MAINTAINERS as pointer to
development trees.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agofix section mismatch in chipsfb
Olaf Hering [Wed, 27 Jun 2007 21:10:00 +0000]
fix section mismatch in chipsfb

WARNING: drivers/built-in.o(.text+0x8742a): Section mismatch: reference to .init.data:chipsfb_fix (between 'chipsfb_pci_init' and 'chipsfb_set_par')
WARNING: drivers/built-in.o(.text+0x87432): Section mismatch: reference to .init.data:chipsfb_fix (between 'chipsfb_pci_init' and 'chipsfb_set_par')
WARNING: drivers/built-in.o(.text+0x87442): Section mismatch: reference to .init.data:chipsfb_var (between 'chipsfb_pci_init' and 'chipsfb_set_par')
WARNING: drivers/built-in.o(.text+0x8744a): Section mismatch: reference to .init.data:chipsfb_var (between 'chipsfb_pci_init' and 'chipsfb_set_par')

init_chips is only called from chipsfb_pci_init
chipsfb_fix and chipsfb_var are only referenced from init_chips

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agoavoid spurious POLLIN returns in signalfd
Davide Libenzi [Wed, 27 Jun 2007 21:09:59 +0000]
avoid spurious POLLIN returns in signalfd

The new code in kernel/signal.c does not allow fetching private signals
from another task.  This patch avoid spurious POLLIN returns from a
signalfd poll(2) operation.

Signed-off-by: Davide Libenzi <davidel@xmailserver.org>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agosaa7134: fix thread shutdown handling
Jeff Mahoney [Wed, 27 Jun 2007 21:09:58 +0000]
saa7134: fix thread shutdown handling

This patch changes the test for the thread pid from >= 0 to > 0.

When the saa8134 driver initialization fails after a certain point, it goes
through the complete shutdown process for the driver.  Part of shutting it
down includes tearing down the thread for tv audio.

The test for tearing down the thread tests for >= 0.  Since the dev
structure is kzalloc'd, the test will always be true if we haven't tried to
start the thread yet.  We end up waiting on pid 0 to complete, which will
never happen, so we lock up.

This bug was observed in Novell Bugzilla 284718, when request_irq() failed.

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agoALSA: fix ice1712 section mismatch
Randy Dunlap [Wed, 27 Jun 2007 21:09:57 +0000]
ALSA: fix ice1712 section mismatch

Cannot mix const and __initdata:
sound/pci/ice1712/prodigy192.c:708: error: ak4114_controls causes a section type conflict

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Jaroslav Kysela <perex@suse.cz>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agoIOATDMA: fix section mismatches
Randy Dunlap [Wed, 27 Jun 2007 21:09:56 +0000]
IOATDMA: fix section mismatches

Rename struct pci_driver data so that false section mismatch warnings won't
be produced.

Sam, ISTM that depending on variable names is the weakest & worst part of
modpost section checking.  Should __init_refok work here?  I got build
errors when I tried to use it, probably because the struct pci_driver probe
and remove methods are not marked "__init_refok".

WARNING: drivers/dma/ioatdma.o(.data+0x10): Section mismatch: reference to .init.text: (between 'ioat_pci_drv' and 'ioat_pci_tbl')
WARNING: drivers/dma/ioatdma.o(.data+0x14): Section mismatch: reference to .exit.text: (between 'ioat_pci_drv' and 'ioat_pci_tbl')

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Chris Leech <christopher.leech@intel.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agoFix Kconfig dependency problems wrt boolean menuconfigs
Trent Piepho [Wed, 27 Jun 2007 21:09:54 +0000]
Fix Kconfig dependency problems wrt boolean menuconfigs

If one has a dependency chain (tristate)FOO depends on (bool)BAR depends on
(tristate)BAZ, build problems will result.  If BAZ=m, then BAR can be set
y, which allows FOO=y.  It's possible to have FOO=y && BAZ=m, which
wouldn't be allowed if FOO depended directly on BAZ.  In effect, the bool
promotes the tristate from m to y.

This ends up causing a problem with several menuconfigs that look like:

menuconfig BAR
bool
depends on BAZ [tristate]
if BAR
config FOO
tristate
endif

The solution used here is to add the dependencies of BAR to the if
statement, so that items in the if block will gain a direct
non-bool-promoted dependency on BAZ.  This is how it would work if a menu
was used instead of an if block.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Acked-by: Jeff Garzik <jeff@garzik.org>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Chas Williams <chas@cmf.nrl.navy.mil>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agomm: kill validate_anon_vma to avoid mapcount BUG
Hugh Dickins [Wed, 27 Jun 2007 21:09:53 +0000]
mm: kill validate_anon_vma to avoid mapcount BUG

validate_anon_vma gave a useful check on the integrity of the anon_vma list
when Andrea was developing obj rmap; but it was not enabled in SLES9
itself, nor in mainline, until Nick changed commented-out RMAP_DEBUG to
configurable CONFIG_DEBUG_VM in 2.6.17.  Now Petr Vandrovec reports that
its BUG_ON(mapcount > 100000) can easily crash a CONFIG_DEBUG_VM=y system.

That limit was just an arbitrary number to protect against an infinite
loop.  We could raise it to something enormous (depending on sizeof struct
vma and size of memory?); but I rather think validate_anon_vma has outlived
its usefulness, and is better just removed - which gives a magnificent
performance boost to anything like Petr's test program ;)

Of course, a very long anon_vma list is bad news for preemption latency,
and I believe there has been one recent report of such: let's not forget
that, but validate_anon_vma only makes it worse not better.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: Petr Vandrovec <petr@vmware.com>
Acked-by: Nick Piggin <npiggin@suse.de>
Cc: Andrea Arcangeli <andrea@suse.de>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agoPNP SMCf010 quirk: auto-config device if BIOS left it broken
Bjorn Helgaas [Wed, 27 Jun 2007 21:09:52 +0000]
PNP SMCf010 quirk: auto-config device if BIOS left it broken

Some HP firmware leaves the SMCf010 IRDA device incompletely configured, or
reports the wrong resources in _CRS.  As a workaround, when we find such a
device, try to auto-configure the device.

This ignores the _CRS data, picks a config from _PRS, and runs _SRS to
configure the device.  This makes smsc-ircc2 work correctly with PNP
resources (with no preconfiguration!) on all the machines I tested.

I think Windows does something like this by default for all devices,
so we should consider doing the same thing in Linux.

This patch addresses part of the 2.6.22 regression:
    "no irda0 interface (2.6.21 was OK), smsc does not find chip"
It fixes smsc-ircc2 PNP device detection on HP nc6000, nc6220, nw8000,
nw8240, and possibly other machines.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Samuel Ortiz <samuel@sortiz.org>
Cc: "Linus Walleij (LD/EAB)" <linus.walleij@ericsson.com>
Cc: Andrey Borzenkov <arvidjaar@mail.ru>
Cc: Michal Piotrowski <michal.k.k.piotrowski@gmail.com>
Cc: Adam Belay <ambx1@neo.rr.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agosmsc-ircc2: skip preconfiguration for PNP devices
Bjorn Helgaas [Wed, 27 Jun 2007 21:09:50 +0000]
smsc-ircc2: skip preconfiguration for PNP devices

If we rely on the device resources from PNPBIOS, we also have to rely on
the BIOS to configure any bridges on the way to the device.

Using the PNPBIOS resources but changing the configuration of a bridge
behind the back of the firmware is likely to make things inconsistent.

This patch addresses part of the 2.6.22 regression:
    "no irda0 interface (2.6.21 was OK), smsc does not find chip"
It fixes smsc-ircc2 PNP device detection on HP nx5000 laptops.
Other laptops, including HP nc6000, HP nc8000, HP nw8000, and Toshiba
Portege 4000, still need PNP quirks to make this work.

With "smsc-ircc2.nopnp", we do the legacy device probe, including manual
bridge preconfiguration, as before.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Samuel Ortiz <samuel@sortiz.org>
Acked-by: "Linus Walleij (LD/EAB)" <linus.walleij@ericsson.com>
Cc: Andrey Borzenkov <arvidjaar@mail.ru>
Cc: Michal Piotrowski <michal.k.k.piotrowski@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Adam Belay <ambx1@neo.rr.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agomtrr/cyrix: fix sections
Randy Dunlap [Wed, 27 Jun 2007 21:09:49 +0000]
mtrr/cyrix: fix sections

main.c::mtrr_add() or mtrr_del() [exported]
calls main.c::mtrr_add_page() or mtrr_del_page() or mtrr_restore() [resume]
calls main.c::set_mtrr()
calls main.c::ipi_handler()
calls main.c::mtrr_if->set_all() == which can be cyrix_set_all

WARNING: arch/i386/kernel/built-in.o(.text+0x8657): Section mismatch: reference to .init.data: (between 'cyrix_set_all' and 'centaur_get_free_region')
WARNING: arch/i386/kernel/built-in.o(.text+0x866b): Section mismatch: reference to .init.data: (between 'cyrix_set_all' and 'centaur_get_free_region')
WARNING: arch/i386/kernel/built-in.o(.text+0x867e): Section mismatch: reference to .init.data: (between 'cyrix_set_all' and 'centaur_get_free_region')
WARNING: arch/i386/kernel/built-in.o(.text+0x8684): Section mismatch: reference to .init.data: (between 'cyrix_set_all' and 'centaur_get_free_region')
WARNING: arch/i386/kernel/built-in.o(.text+0x868a): Section mismatch: reference to .init.data: (between 'cyrix_set_all' and 'centaur_get_free_region')

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agoeventfd: clean compile when CONFIG_EVENTFD=n
Randy Dunlap [Wed, 27 Jun 2007 21:09:48 +0000]
eventfd: clean compile when CONFIG_EVENTFD=n

Fix gcc warning and add parameter checking when CONFIG_EVENTFD=n:

fs/aio.c: In function 'aio_complete':
fs/aio.c:955: warning: statement with no effect

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Davide Libenzi <davidel@xmailserver.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agoatyfb: Fix XCLK frequency on Apple iBook1
Ville Syrjala [Wed, 27 Jun 2007 21:09:46 +0000]
atyfb: Fix XCLK frequency on Apple iBook1

Fix a regression on Apple iBook1.  Changes in the clock init code caused an
incorrect XCLK frequency to be used leading to a corrupted display.

Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Cc: Olaf Hering <olaf@aepfle.de>
Cc: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agozero out last page for llseek/write
Michael Halcrow [Wed, 27 Jun 2007 21:09:45 +0000]
zero out last page for llseek/write

When one llseek's past the end of the file and then writes, every page past
the previous end of the file should be cleared.  Trevor found that the code,
as is, does not assure that the very last page is always cleared.  This patch
takes care of that.

Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agoeCryptfs: initialize crypt_stat in setattr
Michael Halcrow [Wed, 27 Jun 2007 21:09:44 +0000]
eCryptfs: initialize crypt_stat in setattr

Recent changes in eCryptfs have made it possible to get to ecryptfs_setattr()
with an uninitialized crypt_stat struct.  This results in a wide and colorful
variety of unpleasantries.  This patch properly initializes the crypt_stat
structure in ecryptfs_setattr() when it is necessary to do so.

Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agoeCryptfs: fix write zeros behavior
Michael Halcrow [Wed, 27 Jun 2007 21:09:44 +0000]
eCryptfs: fix write zeros behavior

This patch fixes the processes involved in wiping regions of the data during
truncate and write events, fixing a kernel hang in 2.6.22-rc4 while assuring
that zero values are written out to the appropriate locations during events in
which the i_size will change.

The range passed to ecryptfs_truncate() from ecryptfs_prepare_write() includes
the page that is the object of ecryptfs_prepare_write().  This leads to a
kernel hang as read_cache_page() is executed on the same page in the
ecryptfs_truncate() execution path.  This patch remedies this by limiting the
range passed to ecryptfs_truncate() so as to exclude the page that is the
object of ecryptfs_prepare_write(); it also adds code to
ecryptfs_prepare_write() to zero out the region of its own page when writing
past the i_size position.  This patch also modifies ecryptfs_truncate() so
that when a file is truncated to a smaller size, eCryptfs will zero out the
contents of the new last page from the new size through to the end of the last
page.

Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agoMerge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
Linus Torvalds [Wed, 27 Jun 2007 17:04:02 +0000]
Merge branch 'release' of git://git./linux/kernel/git/aegl/linux-2.6

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] Make SN2 PCI code use ioremap rather than manually mangle the address
  [IA64] Force error to surface in nofault code
  [IA64] change sh_change_coherence oemcall to use nolock
  [IA64] remove duplicate header include line
  [IA64] Correct unwind validation code
  [IA64] is_power_of_2-ia64/mm/hugetlbpage.c

13 years agoMerge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik...
Linus Torvalds [Wed, 27 Jun 2007 17:00:23 +0000]
Merge branch 'upstream-linus' of /linux/kernel/git/jgarzik/libata-dev

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  libata: kill ATA_HORKAGE_DMA_RW_ONLY
  libata: use PIO for non-16 byte aligned ATAPI commands
  libata: call ata_check_atapi_dma() with qc better prepared
  libata: fix infinite EH waiting bug
  libata: fix ata_dev_disable()
  pata_it821x: fix section mismatch warning
  libata: remove unused variable from ata_eh_reset()
  libata: be less verbose about hpa
  libata: kill non-sense warning message
  libata: kill the infamous abnormal status message
  HPT374 is UDMA100 not UDMA133

13 years agoMerge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik...
Linus Torvalds [Wed, 27 Jun 2007 16:59:52 +0000]
Merge branch 'upstream-linus' of /linux/kernel/git/jgarzik/netdev-2.6

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6:
  2.6.22: ERROR: "__ucmpdi2" [drivers/net/s2io.ko] undefined!
  cxgb3 - fix register to stop bc/mc traffic
  au1000_eth: Fix warnings.

13 years agoremove leftover documentation of acpi_generic_hotkey
Stephen Hemminger [Wed, 27 Jun 2007 02:03:04 +0000]
remove leftover documentation of acpi_generic_hotkey

This looks like leftover text in the kernel parameter in documentation.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agoAdd support SiS based XGI chips to SiS DRM.
Ian Romanick [Tue, 26 Jun 2007 20:38:00 +0000]
Add support SiS based XGI chips to SiS DRM.

This adds support for some of the XGI Volari family that are based on the
SiS.

Signed-off-by: Dave Airlie <airlied@linux.ie>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agolibata: kill ATA_HORKAGE_DMA_RW_ONLY
Tejun Heo [Tue, 26 Jun 2007 17:49:38 +0000]
libata: kill ATA_HORKAGE_DMA_RW_ONLY

ATA_HORKAGE_DMA_RW_ONLY for TORiSAN is verified to be subset of using
DMA for ATAPI commands which aren't aligned to 16 bytes.  As libata
now doesn't use DMA for unaligned ATAPI commands, the horkage is
redundant.  Kill it.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

13 years agolibata: use PIO for non-16 byte aligned ATAPI commands
Tejun Heo [Tue, 26 Jun 2007 17:48:43 +0000]
libata: use PIO for non-16 byte aligned ATAPI commands

The IDE driver used DMA for ATAPI commands if READ/WRITE command is
multiple of sector size or sg command is multiple of 16 bytes.  For
libata, READ/WRITE sector alignment is guaranteed by the high level
driver (sr), so we only have to worry about the 16 byte alignment.

This patch makes ata_check_atapi_dma() always request PIO for all data
transfer commands which are not multiple of 16 bytes.

The following reports are related to this problem.

http://bugzilla.kernel.org/show_bug.cgi?id=8605 (confirmed)
http://thread.gmane.org/gmane.linux.kernel/476620 (confirmed)
https://bugzilla.novell.com/show_bug.cgi?id=229260 (probably)

Albert first pointed out the difference between IDE and libata.  Kudos
to him.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Albert Lee <albertcc@tw.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

13 years agolibata: call ata_check_atapi_dma() with qc better prepared
Tejun Heo [Tue, 26 Jun 2007 17:47:35 +0000]
libata: call ata_check_atapi_dma() with qc better prepared

In atapi_xlat(), prepare qc better before calling
ata_check_atapi_dma() such that ata_check_atapi_dma() can use info
from qc.  While at it, reformat weird looking if/else block in the
function.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

13 years agolibata: fix infinite EH waiting bug
Tejun Heo [Mon, 25 Jun 2007 12:47:11 +0000]
libata: fix infinite EH waiting bug

When EH gives up after repeated exceptions, it doesn't't clear the
PENDING bit on exit which leaves PENDING bit set without EH actually
scheduled.  This makes ata_port_wait_eh() to wait forever makes rmmod
hang on such port.  Fix it by clearing the flag.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

13 years agolibata: fix ata_dev_disable()
Tejun Heo [Mon, 25 Jun 2007 14:34:02 +0000]
libata: fix ata_dev_disable()

Fix silly condition check bug in ata_dev_disable().

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

13 years agopata_it821x: fix section mismatch warning
Randy Dunlap [Mon, 25 Jun 2007 17:42:22 +0000]
pata_it821x: fix section mismatch warning

Fix section mismatch when CONFIG_HOTPLUG=n (but functions are used
for resume):

WARNING: drivers/ata/pata_it821x.o(.text+0x3f): Section mismatch: reference to .init.text: (between 'it821x_reinit_one' and 'it821x_program_udma')
WARNING: drivers/ata/pata_it821x.o(.text+0x691): Section mismatch: reference to .init.text: (between 'it821x_init_one' and 'it821x_passthru_set_dmamode')

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

13 years agolibata: remove unused variable from ata_eh_reset()
Tejun Heo [Mon, 25 Jun 2007 12:43:04 +0000]
libata: remove unused variable from ata_eh_reset()

Removed unused variable did_followup_srst from ata_eh_reset().

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

13 years agolibata: be less verbose about hpa
Tejun Heo [Mon, 25 Jun 2007 11:45:54 +0000]
libata: be less verbose about hpa

There's no reason to print out hpa related messages when HPA is not
active.  Kill the unconditional message and add a warning message
which is printed if HPA size is smaller than the current size.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

13 years agolibata: kill non-sense warning message
Tejun Heo [Mon, 25 Jun 2007 12:11:13 +0000]
libata: kill non-sense warning message

prereset() is now allowed to set flag for unsupported reset method.
EH layer is responsible for selecting the fallback.  Remove non-sense
warning message.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

13 years agolibata: kill the infamous abnormal status message
Tejun Heo [Mon, 25 Jun 2007 12:31:05 +0000]
libata: kill the infamous abnormal status message

The infamous abnormal status message triggers on not so abnormal cases
including empty port and even when it's being triggered on actual
errors the info it provides is redundant and out of context - higher
level functions will print the info in better safe later anyway.

Also, by being triggered all the time, it leads people to think that
the abnormality is somehow related to all ATA and system problems
they're experiencing and gives owners of healthy systems unfounded
doubts about the integrity of the universe.  Make it a DPRINTK and
save the universe.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

13 years agoHPT374 is UDMA100 not UDMA133
Alan Cox [Fri, 22 Jun 2007 13:17:28 +0000]
HPT374 is UDMA100 not UDMA133

Propogate change from drivers/ide

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

13 years ago2.6.22: ERROR: "__ucmpdi2" [drivers/net/s2io.ko] undefined!
Olaf Hering [Tue, 19 Jun 2007 20:41:10 +0000]
2.6.22: ERROR: "__ucmpdi2" [drivers/net/s2io.ko] undefined!

On Tue, Jun 19, Stephen Hemminger wrote:
> Olaf Hering <olaf@aepfle.de> wrote:
> > What happend to __ucmpdi2 from David Woodhouse?
> > google has a few hits about stuff like this on 32bit powerpc with gcc 4.1.2:
> >
> > ERROR: "__ucmpdi2" [drivers/net/s2io.ko] undefined!
> >
> > using the drivers/net/s2io* files from 2.6.21 with 2.6.22-rc5 fixes the
> > compile.
> >
> > 25805dcf9d83098cf5492117ad2669cd14cc9b24 adds two u64 >>= 48 followed by
> > a switch statement (line 2889 and 6816).
>
> Probably the "switch(err) {" needs a cast to a smaller type (like u8).

This change removes the compiler-generated calls to __ucmpdi2.

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

13 years agocxgb3 - fix register to stop bc/mc traffic
Divy Le Ray [Mon, 25 Jun 2007 22:19:30 +0000]
cxgb3 - fix register to stop bc/mc traffic

Use the right register to stop broadcast/multicast traffic.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

13 years agoau1000_eth: Fix warnings.
Ralf Baechle [Sun, 24 Jun 2007 13:59:54 +0000]
au1000_eth: Fix warnings.

Fixed by including <linux/dma-mapping.h>:

CC drivers/net/au1000_eth.o
drivers/net/au1000_eth.c: In function 'au1000_probe':
drivers/net/au1000_eth.c:661: warning: implicit declaration of function 'dma_alloc_noncoherent'
drivers/net/au1000_eth.c:802: warning: implicit declaration of function 'dma_free_noncoherent'

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

13 years agox86_64 irq: use mask/unmask and proper locking in fixup_irqs()
Siddha, Suresh B [Mon, 25 Jun 2007 22:52:35 +0000]
x86_64 irq: use mask/unmask and proper locking in fixup_irqs()

Force irq migration path during cpu offline, is not using proper locks and
irq_chip mask/unmask routines.  This will result in some races(especially
the device generating the interrupt can see some inconsistent state,
resulting in issues like stuck irq,..).

Appended patch fixes the issue by taking proper lock and encapsulating
irq_chip set_affinity() with a mask() before and an unmask() after.

This fixes a MSI irq stuck issue reported by Darrick Wong.

There are several more general bugs in this area(irq migration in the
process context). For example,

 1. Possibility of missing edge triggered irq.
 2. Reliable method of migrating level triggered irq in the process context.

We plan to look and close these in the near future.

Eric says:
In addition even with the fix from Suresh there is still at least one
nasty hardware race in fixup_irqs().   However we exercise that code
path rarely enough that we are unlikely to hit it in the real world,
and that race seems to have existed since the code was merged.  And a
fix for that is not coming soon as it is an open investigation area
if we can fix irq migration to work outside of irq context or if
we have to rework the requirements imposed by the generic cpu hotplug
and layer on fixup_irqs().  So this may come up again.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Reported-and-tested-by: Darrick Wong <djwong@us.ibm.com>
Cc: Andi Kleen <ak@suse.de>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agox86_64: set the irq_chip name for lapic
Suresh Siddha [Mon, 25 Jun 2007 22:31:37 +0000]
x86_64: set the irq_chip name for lapic

set the irq_chip name for lapic.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agoMerge master.kernel.org:/home/rmk/linux-2.6-arm
Linus Torvalds [Tue, 26 Jun 2007 23:51:23 +0000]
Merge master.kernel.org:/home/rmk/linux-2.6-arm

* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] 4449/1: more entries in arch/arm/boot/.gitignore
  [ARM] 4452/1: Force the literal pool dump before reloc_end
  [ARM] Update show_regs/oops register format
  [ARM] Add support for pause_on_oops and display preempt/smp options

13 years agoMerge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
Linus Torvalds [Tue, 26 Jun 2007 23:50:48 +0000]
Merge branch 'upstream' of git://ftp.linux-mips.org/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] Count timer interrupts correctly.
  [MIPS] SMTC and non-SMTC kernel and modules are incompatible
  [MIPS] EMMA2RH: Disable GEN_RTC, it can't possibly work.
  [MIPS] Remove a duplicated local variable in test_and_clear_bit()
  [MIPS] use compat_siginfo in rt_sigframe_n32
  [MIPS] 20K: Handle WAIT related bugs according to errata information
  [MIPS] AP/SP requires shadow registers, auto enable support.
  [MIPS] Fix pb1500 reg B access
  [MIPS] Alchemy: Fix wrong cast
  [MIPS] remove "support for" from system type entry
  [MIPS] add io_map_base to pci_controller on Cobalt
  [MIPS] __ucmpdi2 arguments are unsigned long long.

13 years agoMerge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
Linus Torvalds [Tue, 26 Jun 2007 23:49:57 +0000]
Merge branch 'merge' of git://git./linux/kernel/git/paulus/powerpc

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  [POWERPC] Fix subtle FP state corruption bug in signal return on SMP
  [POWERPC] Fix VDSO gettimeofday() when called with NULL struct timeval
  [POWERPC] Update defconfigs
  [POWERPC] Update g5_defconfig

13 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6
Linus Torvalds [Tue, 26 Jun 2007 23:49:42 +0000]
Merge /pub/scm/linux/kernel/git/gregkh/usb-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  USB: ftdio_sio: New IPlus device ID
  USB: add new device id to option driver
  USB: fix race leading to use after free in io_edgeport
  USB: usblcd doesn't limit memory consumption during write
  USB: memory leak in iowarrior.c
  USB: ti serial driver sleeps with spinlock held
  USB: g_file_storage: call allow_signal()

13 years ago[IA64] Make SN2 PCI code use ioremap rather than manually mangle the address
Jes Sorensen [Mon, 18 Jun 2007 15:19:05 +0000]
[IA64] Make SN2 PCI code use ioremap rather than manually mangle the address

This one changes the SN2 specific PCI drivers to use ioremap() for
obtaining the real address to access for the PCI registers instead of
manually calculating them with __IA64_UNCACHED_OFFSET.

The patch should have no real change when running on a normal Linux
kernel, but when running as a paravirtualized it is needed.

Signed-off-by: Jes Sorenson <jes@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

13 years ago[IA64] Force error to surface in nofault code
Russ Anderson [Thu, 14 Jun 2007 21:01:24 +0000]
[IA64] Force error to surface in nofault code

Montecito behaves slightly differently than previous processors,
resulting in the MCA due to a failed PIO read to sometimes surfacing
outside the nofault code.  Adding an additional or and stop bits
ensures the MCA surfaces in the nofault code.

Signed-off-by: Russ Anderson <rja@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

13 years ago[IA64] change sh_change_coherence oemcall to use nolock
Dean Nelson [Tue, 19 Jun 2007 11:26:17 +0000]
[IA64] change sh_change_coherence oemcall to use nolock

Change sn_change_coherence's ia64_sal_oemcall to the nolock variety since
PROM does the locking for this function internally.

Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

13 years ago[IA64] remove duplicate header include line
MUNEDA Takahiro [Wed, 20 Jun 2007 04:00:00 +0000]
[IA64] remove duplicate header include line

Remove duplicate header include line from arch/ia64/kernel/time.c.

Signed-off-by: MUNEDA Takahiro <muneda.takahiro@jp.fujitsu.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

13 years ago[IA64] Correct unwind validation code
Keith Owens [Tue, 26 Jun 2007 06:25:22 +0000]
[IA64] Correct unwind validation code

Both rp_loc and pfs_loc can be in the register stack area _or_ they can
be in the memory stack area, the latter occurs when a struct pt_regs is
pushed.  Correct the validation check on these fields to check for both
stack areas.  Not allowing for memory stack locations means no
backtrace past ia64_leave_kernel, or any other code that uses
PT_REGS_UNWIND_INFO.

Signed-off-by: Keith Owens <kaos@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

13 years ago[IA64] is_power_of_2-ia64/mm/hugetlbpage.c
vignesh babu [Thu, 7 Jun 2007 09:57:46 +0000]
[IA64] is_power_of_2-ia64/mm/hugetlbpage.c

Replacing (n & (n-1)) in the context of power of 2 checks
with is_power_of_2

Signed-off-by: vignesh babu <vignesh.babu@wipro.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

13 years ago[MIPS] Count timer interrupts correctly.
Chris Dearman [Thu, 21 Jun 2007 11:59:58 +0000]
[MIPS] Count timer interrupts correctly.

Signed-off-by: Chris Dearman <chris@mips.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

13 years ago[MIPS] SMTC and non-SMTC kernel and modules are incompatible
Ralf Baechle [Wed, 20 Jun 2007 13:25:27 +0000]
[MIPS] SMTC and non-SMTC kernel and modules are incompatible

So don't allow mixing.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

13 years ago[MIPS] EMMA2RH: Disable GEN_RTC, it can't possibly work.
Ralf Baechle [Mon, 18 Jun 2007 15:36:11 +0000]
[MIPS] EMMA2RH: Disable GEN_RTC, it can't possibly work.

Neither rtc_mips_get_time nor rtc_mips_set_time are being initialized by
the EMMA2RH setup code, so genrtc at best was a RTC dummy avoiding a few
error messages but not providing actual functionality.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

13 years ago[MIPS] Remove a duplicated local variable in test_and_clear_bit()
Atsushi Nemoto [Wed, 13 Jun 2007 15:56:31 +0000]
[MIPS] Remove a duplicated local variable in test_and_clear_bit()

Fix a sparse warning caused by 2c921d07f8c641e691b0dfd80a5cfe14c60ec489

include2/asm/bitops.h:313:23: warning: symbol 'res' shadows an earlier one
include2/asm/bitops.h:309:16: originally declared here

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

13 years ago[MIPS] use compat_siginfo in rt_sigframe_n32
Pavel Kiryukhin [Tue, 5 Jun 2007 09:42:20 +0000]
[MIPS] use compat_siginfo in rt_sigframe_n32

Signed-off-by: Pavel Kiryukhin <vksavl@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

13 years ago[MIPS] 20K: Handle WAIT related bugs according to errata information
Ralf Baechle [Tue, 12 Jun 2007 12:04:09 +0000]
[MIPS] 20K: Handle WAIT related bugs according to errata information

We used to avoid the WAIT entirely on the 20K but really only need to do
this on early revs of the 20K.  Without this a 20K was a bit of a
power hog.  Well, in the lower power power hog category ;-)

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

13 years ago[MIPS] AP/SP requires shadow registers, auto enable support.
Ralf Baechle [Fri, 1 Jun 2007 14:47:46 +0000]
[MIPS] AP/SP requires shadow registers, auto enable support.

Noticed by Chris Dearman (chris@mips.com).

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

13 years ago[MIPS] Fix pb1500 reg B access
Yoichi Yuasa [Mon, 28 May 2007 14:26:56 +0000]
[MIPS] Fix pb1500 reg B access

au_readl() is correct here.

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

13 years ago[MIPS] Alchemy: Fix wrong cast
Yoichi Yuasa [Mon, 28 May 2007 14:13:50 +0000]
[MIPS] Alchemy: Fix wrong cast

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

13 years ago[MIPS] remove "support for" from system type entry
Yoichi Yuasa [Mon, 28 May 2007 13:54:28 +0000]
[MIPS] remove "support for" from system type entry

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

13 years ago[MIPS] add io_map_base to pci_controller on Cobalt
Yoichi Yuasa [Mon, 21 May 2007 14:02:34 +0000]
[MIPS] add io_map_base to pci_controller on Cobalt

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

13 years ago[MIPS] __ucmpdi2 arguments are unsigned long long.
Ralf Baechle [Tue, 26 Jun 2007 17:37:20 +0000]
[MIPS] __ucmpdi2 arguments are unsigned long long.

Reported by Eugene Surovegin <ebs@ebshome.net>.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

13 years agoUSB: ftdio_sio: New IPlus device ID
Luiz Fernando N. Capitulino [Fri, 22 Jun 2007 01:34:23 +0000]
USB: ftdio_sio: New IPlus device ID

Reported by Grzegorz Chimosz <gchimi@gmail.com>

Signed-off-by: Luiz Fernando N. Capitulino <lcapitulino@mandriva.com.br>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years agoUSB: add new device id to option driver
Alexander Gattin [Tue, 19 Jun 2007 21:48:10 +0000]
USB: add new device id to option driver

Cc: Matthias Urlichs <smurf@smurf.noris.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years agoUSB: fix race leading to use after free in io_edgeport
Oliver Neukum [Wed, 13 Jun 2007 16:50:41 +0000]
USB: fix race leading to use after free in io_edgeport

usb_unlink_urb() is asynchronous, therefore an URB's buffer may not
be freed without waiting for the completion handler. This patch switches
to usb_kill_urb(), which is synchronous.
Thanks to Alan for making me look at the remaining users of usb_unlink_urb()

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Al Borchers <alborchers@steinerpoint.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years agoUSB: usblcd doesn't limit memory consumption during write
Oliver Neukum [Mon, 11 Jun 2007 13:36:02 +0000]
USB: usblcd doesn't limit memory consumption during write

usblcd currently has no way to limit memory consumption by fast writers.
This is a security problem, as it allows users with write access to this
device to drive the system into oom despite resource limits.
Here's the fix taken from the modern skeleton driver.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years agoUSB: memory leak in iowarrior.c
Oliver Neukum [Tue, 12 Jun 2007 13:36:07 +0000]
USB: memory leak in iowarrior.c

this is a classical memory leak in the ioctl handler. The buffer is simply
never freed. This fixes it the obvious way.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years agoUSB: ti serial driver sleeps with spinlock held
Oliver Neukum [Mon, 7 May 2007 06:33:18 +0000]
USB: ti serial driver sleeps with spinlock held

you are submitting an URB with GFP_KERNEL holding a spinlock.
In this case the spinlock can be dropped earlier.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Cc: Al Borchers <alborchers@steinerpoint.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years agoUSB: g_file_storage: call allow_signal()
Oleg Nesterov [Wed, 30 May 2007 15:06:33 +0000]
USB: g_file_storage: call allow_signal()

New changes in the signal-handling code require compensating changes
in g_file_storage.  This patch (as913) by Oleg Nesterov makes the
code use allow_signal() instead of sigprocmask().

From: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[POWERPC] Fix subtle FP state corruption bug in signal return on SMP
Paul Mackerras [Tue, 26 Jun 2007 04:49:11 +0000]
[POWERPC] Fix subtle FP state corruption bug in signal return on SMP

This fixes a bug which can cause corruption of the floating-point state
on return from a signal handler.  If we have a signal handler that has
used the floating-point registers, and it happens to context-switch to
another task while copying the interrupted floating-point state from the
user stack into the thread struct (e.g. because of a page fault, or
because it gets preempted), the context switch code will think that the
FP registers contain valid FP state that needs to be copied into the
thread_struct, and will thus overwrite the values that the signal return
code has put into the thread_struct.

This can occur because we clear the MSR bits that indicate the presence
of valid FP state after copying the state into the thread_struct.  To fix
this we just move the clearing of the MSR bits to before the copy.  A
similar potential problem also occurs with the Altivec state, and this
fixes that in the same way.

Signed-off-by: Paul Mackerras <paulus@samba.org>

13 years ago[POWERPC] Fix VDSO gettimeofday() when called with NULL struct timeval
Tony Breeds [Mon, 25 Jun 2007 23:50:32 +0000]
[POWERPC] Fix VDSO gettimeofday() when called with NULL struct timeval

Consider the prototype for gettimeofday():
int gettimofday(struct timeval *tv, struct timezone *tz);

Although it is valid to call with /either/ tv or tz being NULL, and
the C version of sys_gettimeofday() supports this, the current version
of gettimeofday() in the VDSO will SEGV if called with a NULL tv.

This adds a check for tv being NULL so that it doesn't SEGV.

Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

13 years ago[POWERPC] Update defconfigs
Paul Mackerras [Tue, 26 Jun 2007 04:19:35 +0000]
[POWERPC] Update defconfigs

Signed-off-by: Paul Mackerras <paulus@samba.org>

13 years ago[POWERPC] Update g5_defconfig
will schmidt [Fri, 22 Jun 2007 15:24:56 +0000]
[POWERPC] Update g5_defconfig

Update the g5_defconfig with default settings.
This is to keep things up to date, and specifically to ensure that the
CONFIG_MACINTOSH_DRIVERS option is enabled.  This also turns on
CONFIG_MSI.

Signed-off-by: Will Schmidt <will_schmidt@vnet.ibm.com>
cc: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

13 years agofix nmi_watchdog=2 bootup hang
Björn Steinbrink [Mon, 25 Jun 2007 21:04:37 +0000]
fix nmi_watchdog=2 bootup hang

wrmsrl() is broken, dropping the upper 32bits of the value to be
written. This broke the NMI watchdog on AMD hardware. (and it
probably broke other code too.)

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years ago[ARM] 4449/1: more entries in arch/arm/boot/.gitignore
Nicolas Pitre [Wed, 20 Jun 2007 18:10:34 +0000]
[ARM] 4449/1: more entries in arch/arm/boot/.gitignore

Signed-off-by: Nicolas Pitre <npitre@mvista.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[ARM] 4452/1: Force the literal pool dump before reloc_end
Catalin Marinas [Fri, 22 Jun 2007 13:27:50 +0000]
[ARM] 4452/1: Force the literal pool dump before reloc_end

In the arch/arm/boot/compressed/head.S file, the contents of the
literal pool accumulated during the relocatable code must be dumped
before reloc_end.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years agoLinus 2.6.22-rc6
Linus Torvalds [Sun, 24 Jun 2007 23:21:48 +0000]
Linus 2.6.22-rc6

13 years agoFUTEX: Restore the dropped ERSCH fix
Thomas Gleixner [Sat, 23 Jun 2007 09:48:40 +0000]
FUTEX: Restore the dropped ERSCH fix

The return value of futex_find_get_task() needs to be -ESRCH in case
that the search fails.  This was part of the original futex fixes and
got accidentally dropped, when the futex-tidy-up patch was split out.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Stable Team <stable@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agoMerge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Sun, 24 Jun 2007 16:42:15 +0000]
Merge branch 'master' of /linux/kernel/git/davem/net-2.6

* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [NET]: Make skb_seq_read unmap the last fragment
  [NET]: Re-enable irqs before pushing pending DMA requests
  [TCP] tcp_read_sock: Allow recv_actor() return return negative error value.
  [PPP]: Fix osize too small errors when decoding mppe.
  [PPP]: Revert 606f585e363527da9feaed79465132c0c661fd9e
  [TIPC]: Fix infinite loop in netlink handler
  [SKBUFF]: Fix incorrect config #ifdef around skb_copy_secmark
  [IPV4]: include sysctl.h from inetdevice.h
  [IPV6] NDISC: Fix thinko to control Router Preference support.
  [NETFILTER]: nfctnetlink: Don't allow to change helper
  [NETFILTER]: nf_conntrack_sip: add missing message types containing RTP info

13 years agoACPI: preserve the ebx value in acpi_copy_wakeup_routine
Tian Kevin [Sun, 24 Jun 2007 00:16:52 +0000]
ACPI: preserve the ebx value in acpi_copy_wakeup_routine

Register %ebx serves as the "global offset table base register" for
position-independent code.  For absolute code, %ebx serves as a local
register and has no specified role in the function calling sequence.  In
either case, a function must preserve the register value for the caller.

acpi_copy_wakeup_routine overrides %ebx without saving it, this may corrupt
the called data.

Kevin found that most time the value of Sx is saved in %esi, however
sometimes compiler also uses %ebx.  When this happens, suspends fails since
sleep value in ebx is changed by acpi_copy_wakeup_routine.

The same funtion in X86_64 doesn't have this problem.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Looks-okay-to: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Len Brown <lenb@kernel.org>
Acked-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agoext4: lost brelse in ext4_read_inode()
Kirill Korotaev [Sun, 24 Jun 2007 00:16:51 +0000]
ext4: lost brelse in ext4_read_inode()

One of error path in ext4_read_inode() leaks bh since brelse is forgoten.

Signed-off-by: Kirill Korotaev <dev@openvz.org>
Acked-by: Vasily Averin <vvs@sw.ru>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agoext3: lost brelse in ext3_read_inode()
Kirill Korotaev [Sun, 24 Jun 2007 00:16:48 +0000]
ext3: lost brelse in ext3_read_inode()

One of error path in ext3_read_inode() leaks bh since brelse is forgoten.

Signed-off-by: Kirill Korotaev <dev@openvz.org>
Acked-by: Vasily Averin <vvs@sw.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agoaudit: fix oops removing watch if audit disabled
Tony Jones [Sun, 24 Jun 2007 00:16:47 +0000]
audit: fix oops removing watch if audit disabled

Removing a watched file will oops if audit is disabled (auditctl -e 0).

To reproduce:
- auditctl -e 1
- touch /tmp/foo
- auditctl -w /tmp/foo
- auditctl -e 0
- rm /tmp/foo (or mv)

Signed-off-by: Tony Jones <tonyj@suse.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agoext2: disallow setting xip on remount
Carsten Otte [Sun, 24 Jun 2007 00:16:46 +0000]
ext2: disallow setting xip on remount

Yan Zheng pointed out that ext2_remount lacks checking if -o xip should be
enabled or not.  This patch checks for presence of direct_access on the
backing block device and if the blocksize meets the requirements.

Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Cc: Yan Zheng <yanzheng@21cn.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agox86_64: fix misplaced `continue' in mce.c
Joshua Wise [Sun, 24 Jun 2007 00:16:45 +0000]
x86_64: fix misplaced `continue' in mce.c

Background:
  When a userspace application wants to know about machine check events, it
  opens /dev/mcelog and does a read(). Usually, we found that this interface
  works well, but in some cases, when the system was taking large numbers of
  machine check exceptions, the read() would hang. The system would output a
  soft-lockup warning, and the daemon reading from /dev/mcelog would suck up
  as much of a single CPU as it could spinning in system space.

Description:
  This patch fixes this bug. In particular, there was a "continue" inside a
  timeout loop that presumably was intended to break out of the outer loop,
  but instead caused the inner loop to continue. This patch also makes the
  condition for the break-out a little more evident by changing a
  !time_before to a time_after_eq.

Result:
  The read() no longer hangs in this test case.

Testing:
  On my system, I could replicate the bug with the following command:
    # for i in `seq 15000`; do ./inject_sbe.sh; done
  where inject_sbe.sh contains commands to inject a single-bit error into the
  next memory write transaction.

Patch:
  This patch is against git f1518a088bde6aea49e7c472ed6ab96178fcba3e.

Signed-off-by: Joshua Wise <jwise@google.com>
Signed-off-by: Tim Hockin <thockin@google.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agoupdate checkpatch.pl to version 0.06
Andy Whitcroft [Sun, 24 Jun 2007 00:16:44 +0000]
update checkpatch.pl to version 0.06

Update to checkpatch.pl v0.06.  Of note:

 - do { and else handled correctly as control structures for { matching
 - trailing whitespace correctly tripped when line otherwise empty
 - support for const, including const foo * const bar
 - multiline macros defining values correctly reported

This version of checkpatch.pl can be found at the following URL:

http://www.kernel.org/pub/linux/kernel/people/apw/checkpatch/checkpatch.pl-0.06

Full Changelog:

Andy Whitcroft (14):
      Version: 0.06
      cleanup the Type regular expression declarations
      fix up block counting
      end of line counts as a space for ++ and --
      do { needs the same checks as if, for et al
      handle "const foo * const a" as a valid type
      add spacing checks following ;
      complete whitespace lines should trip trailing whitespace check
      else is also a block control structure
      badly formatted else can trip function declaration
      detect and report trailing statements after else
      types need to be terminated by a boundary
      multiline macros defining values should be surrounded by parentheses
      soften the wording of the Signed-off-by: warnings

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agoslab allocators: MAX_ORDER one off fix
Christoph Lameter [Sun, 24 Jun 2007 00:16:43 +0000]
slab allocators: MAX_ORDER one off fix

MAX_ORDER is the first order that is not possible.

Use MAX_ORDER - 1 to calculate the larges possible object size in slab.h

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agodocument nlink function
Dave Hansen [Sun, 24 Jun 2007 00:16:42 +0000]
document nlink function

These should have been documented from the beginning.  Fix it.

Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years ago"volatile considered harmful"
Jonathan Corbet [Sun, 24 Jun 2007 00:16:41 +0000]
"volatile considered harmful"

Encourage developers to avoid the volatile type class in kernel code.

Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agouml: add asm/paravirt.h
Jeff Dike [Sun, 24 Jun 2007 00:16:39 +0000]
uml: add asm/paravirt.h

Add asm-um/paravirt.h so that i386 headers that get pulled into UML
don't cause build failures when they want asm/paravirt.h.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agouml: use generic BUG
Nick Piggin [Sun, 24 Jun 2007 00:16:37 +0000]
uml: use generic BUG

Get UML to use the generic bug support rather than arch specific one.

If I insert an artificial bug right before loading init, I get this:

 Kernel panic - not syncing: Kernel mode signal 4

 EIP: 0023:[<0819d501>] CPU: 0 Not tainted ESP: 002b:f7fd4fbc EFLAGS: 00000246
    Not tainted
    EAX: 00000000 EBX: 00007870 ECX: 00000013 EDX: 00007870
    ESI: 0000786d EDI: 00000011 EBP: f7fd4fd8 DS: 002b ES: 002b
    08273bec:  [<0806e814>] show_regs+0x104/0x106
    08273c08:  [<08058927>] panic_exit+0x2c/0x4b
    08273c18:  [<08080ee7>] notifier_call_chain+0x32/0x5b
    08273c38:  [<08080fbd>] __atomic_notifier_call_chain+0x30/0x32
    08273c54:  [<08080fee>] atomic_notifier_call_chain+0x2f/0x31
    08273c70:  [<08073b88>] panic+0x75/0x131
    08273c94:  [<080586c7>] relay_signal+0x87/0x95
    08273cb0:  [<0806b9ee>] sig_handler_common_skas+0x9e/0x120
    08273cd8:  [<08067738>] sig_handler+0x28/0x4f
    08273cec:  [<0806792e>] handle_signal+0x53/0x89
    08273d0c:  [<08069f60>] hard_handler+0x18/0x28
    08273d1c:  [<ffffe500>] transitions+0xf7d598b8/0xfffffff0

With this patch in place, this is how it looks:

 BUG: failure at init/main.c:779/init_post()!
 Kernel panic - not syncing: BUG!

 EIP: 0023:[<081a65d1>] CPU: 0 Not tainted ESP: 002b:f7f0dfbc EFLAGS: 00000246
    Not tainted
    EAX: 00000000 EBX: 000069db ECX: 00000013 EDX: 000069db
    ESI: 000069d8 EDI: 00000011 EBP: f7f0dfd8 DS: 002b ES: 002b
    098efedc:  [<0806e9a4>] show_regs+0x104/0x106
    098efef8:  [<080589c7>] panic_exit+0x2c/0x4b
    098eff08:  [<080818d7>] notifier_call_chain+0x32/0x5b
    098eff28:  [<080819ad>] __atomic_notifier_call_chain+0x30/0x32
    098eff44:  [<080819de>] atomic_notifier_call_chain+0x2f/0x31
    098eff60:  [<08073f28>] panic+0x75/0x131
    098eff84:  [<080541d5>] init_post+0xcd/0xe8
    098eff9c:  [<08048ad4>] kernel_init+0x8e/0x9a
    098effb4:  [<08066dee>] run_kernel_thread+0x41/0x53
    098effe0:  [<08058e75>] new_thread_handler+0x62/0x8b
    098efffc:  [<a55a5a5a>] 0xa55a5a5a

[ jdike - added BUG_TABLE to linker script ]

Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agoChar: stallion, fix oops during init with ISA cards
Ingo Korb [Sun, 24 Jun 2007 00:16:35 +0000]
Char: stallion, fix oops during init with ISA cards

The stallion driver oopses while initializing ISA cards due to an
uninitialized variable.  This patch changes the initialisation order to
match the PCI code path.

Signed-off-by: Ingo Korb <ml@akana.de>
Acked-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agoalpha: fix alignment problem in csum_ipv6_magic()
Ivan Kokshaysky [Sun, 24 Jun 2007 00:16:35 +0000]
alpha: fix alignment problem in csum_ipv6_magic()

Hopefully this fixes http://bugzilla.kernel.org/show_bug.cgi?id=8635

The struct in6_addr passed to csum_ipv6_magic() is 4 byte aligned, so we
can't use the regular 64-bit loads.  Since the cost of handling of 4 byte
and 1 byte aligned 64-bit data is roughly the same, this code can cope with
any src/dst [mis]alignment.

Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Dustin Marquess <jailbird@alcatraz.fdf.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agoupdate checkpatch.pl to version 0.05
Andy Whitcroft [Sun, 24 Jun 2007 00:16:34 +0000]
update checkpatch.pl to version 0.05

This version brings a some new tests, and a host of changes to fix
false positives, of particular note:

 - detect 'var ++;' and 'var --;' as a bad combination
 - multistatement #defines are now checked based on statement count
 - multistatement #defines with initialisation correctly reported
 - checks the location of the inline keywords
 - EXPORT_SYMBOL for variables are now understood
 - typedefs are loosened to handle sparse etc

This version of checkpatch.pl can be found at the following URL:

      http://www.shadowen.org/~apw/public/checkpatch/checkpatch.pl-0.05

Full Changelog:

Andy Whitcroft (18):
      Version: 0.05
      macro definition checks should be for a single statement
      avoid assignements only in if conditionals
      declarations of function pointers need no space
      multiline macros which are purely initialisation cannot be wrapped
      EXPORT_SYMBOL can also directly follow a variable definition
      check on the location of the inline keyword
      EXPORT_SYMBOL needs to allow for attributes
      ensure we do not find C99 // in strings
      handle malformed #include lines
      accept the {0,} form
      typedefs are sensible for defining function pointer parameters
      ensure { handling correctly handles nested switch() statements
      trailing whitespace checks are not anchored
      typedefs for sparse bitwise annotations make sense
      update the type matcher to include sparse annotations
      clean up indent and spacing

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agosched: fix next_interval determination in idle_balance()
Christoph Lameter [Sun, 24 Jun 2007 00:16:33 +0000]
sched: fix next_interval determination in idle_balance()

The intervals of domains that do not have SD_BALANCE_NEWIDLE must be
considered for the calculation of the time of the next balance.  Otherwise
we may defer rebalancing forever.

Siddha also spotted that the conversion of the balance interval
to jiffies is missing. Fix that to.

From: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>

also continue the loop if !(sd->flags & SD_LOAD_BALANCE).

Tested-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

It did in fact trigger under all three of mainline, CFS, and -rt including CFS
-- see below for a couple of emails from last Friday giving results for these
three on the AMD box (where it happened) and on a single-quad NUMA-Q system
(where it did not, at least not with such severity).

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agoSLUB: fix behavior if the text output of list_locations overflows PAGE_SIZE
Christoph Lameter [Sun, 24 Jun 2007 00:16:32 +0000]
SLUB: fix behavior if the text output of list_locations overflows PAGE_SIZE

If slabs are allocated or freed from a large set of call sites (typical for
the kmalloc area) then we may create more output than fits into a single
PAGE and sysfs only gives us one page.  The output should be truncated.
This patch fixes the checks to do the truncation properly.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agoSM501: Check SM501 ID register on initialisation
Ben Dooks [Sun, 24 Jun 2007 00:16:31 +0000]
SM501: Check SM501 ID register on initialisation

When binding the driver, check the ID register for a valid identity, in case
the SM501 is not functioning correctly.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>