12 years agoMerge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
Linus Torvalds [Sat, 11 Aug 2007 23:01:06 +0000]
Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  BLOCK: Hide the contents of linux/bio.h if CONFIG_BLOCK=n
  sysace: HDIO_GETGEO has it's own method for ages
  drivers/block/cpqarray.c: better error handling and kmalloc + memset conversion to k[cz]alloc
  drivers/block/cciss.c: kmalloc + memset conversion to kzalloc
  Clean up duplicate includes in drivers/block/
  Fix remap handling by blktrace
  [PATCH] remove mm/filemap.c:file_send_actor()

12 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched
Linus Torvalds [Sat, 11 Aug 2007 22:58:37 +0000]
Merge git://git./linux/kernel/git/mingo/linux-2.6-sched

* git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched:
  sched debug: dont print kernel address in /proc/sched_debug
  sched: fix typo in the FAIR_GROUP_SCHED branch
  sched: improve rq-clock overflow logic

12 years agoi386: Fix double fault handler
Chuck Ebbert [Fri, 10 Aug 2007 20:31:11 +0000]
i386: Fix double fault handler

The new percpu code has apparently broken the doublefault handler
when CONFIG_DEBUG_SPINLOCK is set. Doublefault is handled by
a hardware task, making the check

        SPIN_BUG_ON(lock->owner == current, lock, "recursion");

fault because it uses the FS register to access the percpu data
for current, and that register is zero in the new TSS. (The trace
I saw was on 2.6.20 where it was GS, but it looks like this will
still happen with FS on 2.6.22.)

Initializing FS in the doublefault_tss should fix it.

AK: Also fix broken ptr_ok() and turn printks into KERN_EMERG
AK: And add a PANIC prefix to make clear the system will hang
AK: (e.g. x86-64 will recover)

Signed-off-by: Chuck Ebbert <cebbert@redhat.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoi386: Fix start_kernel warning
Andi Kleen [Fri, 10 Aug 2007 20:31:10 +0000]
i386: Fix start_kernel warning

Fix

WARNING: vmlinux.o(.text+0x183): Section mismatch: reference to .init.text:start_kernel (between 'is386' and 'check_x87')

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agox86_64: vdso.lds in arch/x86_64/vdso/.gitignore
Pete Zaitcev [Fri, 10 Aug 2007 20:31:09 +0000]
x86_64: vdso.lds in arch/x86_64/vdso/.gitignore

Create arch/x86_64/vdso/.gitignore and put vdso.lds into it.

Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoi386: Add warning in Documentation that zero-page is not a stable ABI
Andi Kleen [Fri, 10 Aug 2007 20:31:08 +0000]
i386: Add warning in Documentation that zero-page is not a stable ABI

Some people writing boot loaders seem to falsely belief the 32bit zero page is a
stable interface for out of tree code like the real mode boot protocol. Add a comment
clarifying that is not true.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoi386: Use global flag to disable broken local apic timer on AMD CPUs.
Andi Kleen [Fri, 10 Aug 2007 20:31:07 +0000]
i386: Use global flag to disable broken local apic timer on AMD CPUs.

The Averatec 2370 and some other Turion laptop BIOS seems to program the
ENABLE_C1E MSR inconsistently between cores. This confuses the lapic
use heuristics because when C1E is enabled anywhere it seems to affect
the complete chip.

Use a global flag instead of a per cpu flag to handle this.
If any CPU has C1E enabled disabled lapic use.

Thanks to Cal Peake for debugging.

Cc: tglx@linutronix.de
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoi386: really stop MCEs during code patching
Adrian Bunk [Fri, 10 Aug 2007 20:31:06 +0000]
i386: really stop MCEs during code patching

It's CONFIG_X86_MCE, not CONFIG_MCE.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agox86_64: Early segment setup for VT
Zachary Amsden [Fri, 10 Aug 2007 20:31:05 +0000]
x86_64: Early segment setup for VT

VT is very picky about when it can enter execution.
Get all segments setup and get LDT and TR into valid state to allow
VT execution under VMware and KVM (untested).

This makes the boot decompression run under VT, which makes it several
orders of magnitude faster on 64-bit Intel hardware.

Before, I was seeing times up to a minute or more to decompress a 1.3MB kernel
on a very fast box.

Signed-off-by: Zachary Amsden <zach@vmware.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoi386: Make patching more robust, fix paravirt issue
Andi Kleen [Fri, 10 Aug 2007 20:31:03 +0000]
i386: Make patching more robust, fix paravirt issue

Commit 19d36ccdc34f5ed444f8a6af0cbfdb6790eb1177 "x86: Fix alternatives
and kprobes to remap write-protected kernel text" uses code which is
being patched for patching.

In particular, paravirt_ops does patching in two stages: first it
calls paravirt_ops.patch, then it fills any remaining instructions
with nop_out().  nop_out calls text_poke() which calls
lookup_address() which calls pgd_val() (aka paravirt_ops.pgd_val):
that call site is one of the places we patch.

If we always do patching as one single call to text_poke(), we only
need make sure we're not patching the memcpy in text_poke itself.
This means the prototype to paravirt_ops.patch needs to change, to
marshal the new code into a buffer rather than patching in place as it
does now.  It also means all patching goes through text_poke(), which
is known to be safe (apply_alternatives is also changed to make a
single patch).

AK: fix compilation on x86-64 (bad rusty!)
AK: fix boot on x86-64 (sigh)
AK: merged with other patches

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agox86: Disable CLFLUSH support again
Andi Kleen [Fri, 10 Aug 2007 20:31:02 +0000]
x86: Disable CLFLUSH support again

It turns out CLFLUSH support is still not complete; we
flush the wrong pages.  Again disable it for the release.
Noticed by Jan Beulich who then also noticed a stupid typo later.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agox86_64: Don't mark __exitcall as __cold
Andi Kleen [Fri, 10 Aug 2007 20:31:01 +0000]
x86_64: Don't mark __exitcall as __cold

gcc currently doesn't support attributes on types, so we can't use it
function pointers.  This avoids some warnings on a gcc 4.3 build.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agox86_64: Calgary - Fix mis-handled PCI topology
Murillo Fernandes Bernardes [Fri, 10 Aug 2007 20:31:00 +0000]
x86_64: Calgary - Fix mis-handled PCI topology

Current code assumed that devices were directly connected to a Calgary
bridge, as it tried to get the iommu table directly from the parent bus
controller.

When we have another bridge between the Calgary/CalIOC2 bridge and the
device we should look upwards until we get to the top (Calgary/CalIOC2
bridge), where the iommu table resides.

Signed-off-by: Murillo Fernandes Bernardes <mfb@br.ibm.com>
Signed-off-by: Muli Ben-Yehuda <muli@il.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agox86: Work around mmio config space quirk on AMD Fam10h
dean gaudet [Fri, 10 Aug 2007 20:30:59 +0000]
x86: Work around mmio config space quirk on AMD Fam10h

Some broken devices have been discovered to require %al/%ax/%eax registers
for MMIO config space accesses.  Modify mmconfig.c to use these registers
explicitly (rather than modify the global readb/writeb/etc inlines).

AK: also changed i386 to always use eax
AK: moved change to extended space probing to different patch
AK: reworked with inlines according to Linus' requirements.
AK: improve comments.

Signed-off-by: dean gaudet <dean@arctic.org>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agochanging include/asm-generic/pgtable.h for non-mmu
Greg Ungerer [Fri, 10 Aug 2007 20:01:20 +0000]
changing include/asm-generic/pgtable.h for non-mmu

There are some parts of include/asm-generic/pgtable.h that are relevant to
the non-mmu architectures.  To make it easier to include this from them I
would like to ifdef the relevant parts.

Without this there is a handful of functions that are referenced in here
that are not defined on many non-mmu architectures.  They could be defined
out of course, as an alternative approach.

Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agofinish i386 and x86-64 sysdata conversion
Muli Ben-Yehuda [Fri, 10 Aug 2007 20:01:19 +0000]
finish i386 and x86-64 sysdata conversion

This patch finishes the i386 and x86-64 ->sysdata conversion and hopefully
also fixes Riku's and Andy's observed bugs.  It is based on Yinghai Lu's
and Andy Whitcroft's patches (thanks!) with some changes:

- introduce pci_scan_bus_with_sysdata() and use it instead of
  pci_scan_bus() where appropriate. pci_scan_bus_with_sysdata() will
  allocate the sysdata structure and then call pci_scan_bus().
- always allocate pci_sysdata dynamically. The whole point of this
  sysdata work is to make it easy to do root-bus specific things
  (e.g., support PCI domains and IOMMU's). I dislike using a default
  struct pci_sysdata in some places and a dynamically allocated
  pci_sysdata elsewhere - the potential for someone indavertantly
  changing the default structure is too high.
- this patch only makes the minimal changes necessary, i.e., the NUMA node is
  always initialized to -1. Patches to do the right thing with regards
  to the NUMA node can build on top of this (either add a 'node'
  parameter to pci_scan_bus_with_sysdata() or just update the node
  when it becomes known).

The patch was compile tested with various configurations (e.g., NUMAQ,
VISWS) and run-time tested on i386 and x86-64.  Unfortunately none of my
machines exhibited the bugs so caveat emptor.

Andy, could you please see if this fixes the NUMA issues you've seen?
Riku, does this fix "pci=noacpi" on your laptop?

Signed-off-by: Muli Ben-Yehuda <muli@il.ibm.com>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Chuck Ebbert <cebbert@redhat.com>
Cc: <riku.seppala@kymp.net>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoreadahead: docbook fix
Stephen Hemminger [Fri, 10 Aug 2007 20:01:16 +0000]
readahead: docbook fix

Minor docbook error since argument name in comment doesn't match function

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoalpha: -Werror fixes for sys_titan.c
Jay Estabrook [Fri, 10 Aug 2007 20:01:12 +0000]
alpha: -Werror fixes for sys_titan.c

This code corrects the usage of the request_irq() routine.

Signed-off-by: Jay Estabrook <jay.estabrook@hp.com>
Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agolguest files should explicitly include asm/paravirt.h
Jes Sorensen [Fri, 10 Aug 2007 20:01:11 +0000]
lguest files should explicitly include asm/paravirt.h

Files using bits from paravirt.h should explicitly include it rather than
relying on it being pulled in by something else.

Signed-off-by: Jes Sorensen <jes@sgi.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agofix compilation with gcc 4.2
Peter Chubb [Fri, 10 Aug 2007 20:01:10 +0000]
fix compilation with gcc 4.2

gcc-4.2 is a lot more picky about its symbol handling.  EXPORT_SYMBOL no
longer works on symbols that are undefined or defined with static scope.

For example, with CONFIG_PROFILE off, I see:

  kernel/profile.c:206: error: __ksymtab_profile_event_unregister causes a section type conflict
  kernel/profile.c:205: error: __ksymtab_profile_event_register causes a section type conflict

This patch moves the EXPORTs inside the #ifdef CONFIG_PROFILE, so we
only try to export symbols that are defined.

Also, in kernel/kprobes.c there's an EXPORT_SYMBOL_GPL() for
jprobes_return, which if CONFIG_JPROBES is undefined is a static
inline and gives the same error.

And in drivers/acpi/resources/rsxface.c, there's an
ACPI_EXPORT_SYMBOPL() for a static symbol. If it's static, it's not
accessible from outside the compilation unit, so should bot be exported.

These three changes allow building a zx1_defconfig kernel with gcc 4.2
on IA64.

[akpm@linux-foundation.org: export jpobe_return properly]
Signed-off-by: Peter Chubb <peterc@gelato.unsw.edu.au>
Cc: Prasanna S Panchamukhi <prasanna@in.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agotimer: remove clockevents_unregister_notifier
Miao Xie [Fri, 10 Aug 2007 20:01:09 +0000]
timer: remove clockevents_unregister_notifier

I find a function(clockevents_unregister_notifier) which is not called by
anything in tree.

Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agospidev warning fix
David Brownell [Fri, 10 Aug 2007 20:01:09 +0000]
spidev warning fix

Git rid of "warning: passing arg 2 of `access_ok' makes pointer from integer
without a cast" reported on SH ...  most architectures use macros in that
test, SH uses inlined functions.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agocris: drivers/cdrom/Kconfig no longer exists
Adrian Bunk [Fri, 10 Aug 2007 20:01:08 +0000]
cris: drivers/cdrom/Kconfig no longer exists

scripts/kconfig/conf -d arch/cris/Kconfig
arch/cris/Kconfig:183: can't open file "drivers/cdrom/Kconfig"

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: Mikael Starvik <starvik@axis.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoRCU: Remove prototype for nonexistent function synchronize_idle()
Josh Triplett [Fri, 10 Aug 2007 20:01:07 +0000]
RCU: Remove prototype for nonexistent function synchronize_idle()

synchronize_idle() sounds like an interesting function, but we don't
actually have it, so don't prototype it.  Introduced in commit
9b06e818985d139fd9e82c28297f7744e1b484e1, in 2005.

Signed-off-by: Josh Triplett <josh@kernel.org>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agohex_dump: add missing "const" qualifiers
Alan Stern [Fri, 10 Aug 2007 20:01:07 +0000]
hex_dump: add missing "const" qualifiers

Add missing "const" qualifiers to the print_hex_dump_bytes() library routines.

(akpm: rumoured to fix some compile warning somewhere)

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agomtdchar build fix
Andrew Morton [Fri, 10 Aug 2007 20:01:06 +0000]
mtdchar build fix

sh:

drivers/mtd/mtdchar.c: In function `mtd_mmap':
drivers/mtd/mtdchar.c:817: error: dereferencing pointer to incomplete type
drivers/mtd/mtdchar.c:817: error: `VM_SHARED' undeclared (first use in this function)
drivers/mtd/mtdchar.c:817: error: (Each undeclared identifier is reported only once

Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agofix serial buffer memory leak
Alan Cox [Fri, 10 Aug 2007 20:01:05 +0000]
fix serial buffer memory leak

Patch c5c34d4862e18ef07c1276d233507f540fb5a532 (tty: flush flip buffer on
ldisc input queue flush) introduces a race condition which can lead to memory
leaks.

The problem can be triggered when tcflush() is called when data are being
pushed to the line discipline driver by flush_to_ldisc().

flush_to_ldisc() releases tty->buf.lock when calling the line discipline
receive_buf function. At that poing tty_buffer_flush() kicks in and sets both
tty->buf.head and tty->buf.tail to NULL. When flush_to_ldisc() finishes, it
restores tty->buf.head but doesn't touch tty->buf.tail. This corrups the
buffer queue, and the next call to tty_buffer_request_room() will allocate a
new buffer and overwrite tty->buf.head. The previous buffer is then lost
forever without being released.

(Thanks to Laurent for the above text, for finding, disgnosing and reporting
the bug)

- Use tty->flags bits for the flush status.

- Wait for the flag to clear again before returning

- Fix the doc error noted

- Fix flush of empty queue leaving stale flushpending

[akpm@linux-foundation.org: cleanup]
Signed-off-by: Alan Cox <alan@redhat.com>
Acked-by: Paul Fulghum <paulkf@microgate.com>
Cc: Laurent Pinchart <laurentp@cse-semaphore.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agodocs: note about select in kconfig-language.txt
Jarek Poplawski [Fri, 10 Aug 2007 20:01:04 +0000]
docs: note about select in kconfig-language.txt

A warning note from Sam Ravnborg about kconfig's select evilness,
dependencies and the future (slightly corrected).

Signed-off-by: Jarek Poplawski <jarkao2@o2.pl>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoDocumentation: sysrq, description of 'h' slightly inaccurate
Jesper Juhl [Fri, 10 Aug 2007 20:01:04 +0000]
Documentation: sysrq, description of 'h' slightly inaccurate

In Documentation/sysrq.txt, the description of 'h' says that any key not
listed *above* will generate help.  That's obviously not true since all the
keys listed below 'h' will do what they are described to do, not display help.
 So change the text so that it says that any key not listed in the table will
generate help, which is what really happens.

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoupdate checkpatch.pl to version 0.09
Andy Whitcroft [Fri, 10 Aug 2007 20:01:03 +0000]
update checkpatch.pl to version 0.09

This version brings a number of new checks, and a number of bug
fixes.  Of note:

  - checks for spacing on round and square bracket combinations
  - loosening of the single statement brace checks, to allow
    them when they contain comments or where other blocks in a
    compound statement have them.
  - parks the multple declaration support
  - allows architecture defines in architecture specific headers

Andy Whitcroft (21):
      Version: 0.09
      loosen single statement brace checks
      fix up multiple declaration to avoid function arguments
      add some function space parenthesis check exceptions
      handle EXPORT_'s with parentheses in their names
      clean up some warnings in multi-line macro bracketing support
      park the multiple declaration checks
      make block brace checks count comments as a statement
      __volatile__ and __extension__ are not functions
      allow architecture specific defined within architecture includes
      check spacing on square brackets
      check spacing on parentheses
      ensure we apply checks to the part before start comment
      check #ifdef conditional spacing
      handle __init_refok and __must_check
      add noinline to inline checks
      prevent email addresses from tripping spacing checks
      handle typed initialiser spacing
      handle line contination as end of line
      add bool to the type matcher
      refine EXPORT_SYMBOL checks to handle pointers

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agospi_mpc83xx: fix prescale modulus calculation
Anton Vorontsov [Fri, 10 Aug 2007 20:01:02 +0000]
spi_mpc83xx: fix prescale modulus calculation

Long ago I've noticed (but didn't pay much attention) that
spi_mpc83xx using PM calculations that differs from what
specs describe. I.e.

u8 pm = mpc83xx_spi->spibrg / (spi->max_speed_hz * 4);

While specs says: "The SPI baud rate generator clock source (either
system clock or system clock divided by 16, depending on DIV16 bit) is
divided by 4 * ([PM] + 1), a range from 4 to 64.".

Thus " - 1" is missing in the spi_mpc83xx's formula.

Why nobody noticed that bug? Probably because sysclk usually less then
user expects, e.g. you expect 200 MHz, but real clock is 198 MHz,
and integer rounding helps when this formula is used.

Suppose it's SPI in QE, SYSCLK at 198 MHz, thus SPIBRG at 99MHz, 25 MHz
requested.

PM = (99MHz / ( 25 MHz * 4 )), PM == 0, output SPICLK will be 24.75 MHz

At lower frequencies this bug is more noticeable, though.

And this bug shows itself in all its beauty if SYSCLK is equal or a bit
more than you expect (200 MHz SYSCLK, 100 MHz SPIBRG):
PM = (100MHz / ( 25 MHz * 4 )), PM == 1, output SPICLK will be 12.625 MHz!

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agospi_mpc83xx: in "QE mode", use sysclk/2
Anton Vorontsov [Fri, 10 Aug 2007 20:01:01 +0000]
spi_mpc83xx: in "QE mode", use sysclk/2

For MPC8349E input to the SPI Baud Rate Generator is SYSCLK, but it's
SYSCLK/2 for MPC8323E (SPI in QE).  Fix this, and remove confusion by
renaming the mpc83xx_spi->sysclk member as mpc83xx_spi->spibrg.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agokernel-parameters.txt : watchdog.txt should be wdt.txt
Gabriel C [Fri, 10 Aug 2007 20:01:00 +0000]
kernel-parameters.txt : watchdog.txt should be wdt.txt

Documentation/watchdog/watchdog.txt does not exist, it is Documentation/watchdog/wdt.txt

Signed-off-by: Gabriel Craciunescu <nix.or.die@googlemail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoMemory hotplug document
Yasunori Goto [Fri, 10 Aug 2007 20:00:59 +0000]
Memory hotplug document

This is add a document for memory hotplug to describe "How to use" and
"Current status".

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agodrivers/char/pcmcia/cm40x0_cs.c: fix release function call
Daniel Ritz [Fri, 10 Aug 2007 20:00:58 +0000]
drivers/char/pcmcia/cm40x0_cs.c: fix release function call

cm4000_cs.c and cm4040_cs.c call the internal release function with
an argument of wrong type. this fixes bug #8485

Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch>
Cc: Bill McConnaughey <mcconnau@biochem.wustl.edu>
Cc: Natalie Protasevich <protasnb@gmail.com>
Cc: Harald Welte <laforge@gnumonks.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoHibernation: do not try to mark invalid PFNs as nosave
Rafael J. Wysocki [Fri, 10 Aug 2007 20:00:57 +0000]
Hibernation: do not try to mark invalid PFNs as nosave

On some systems some PFNs reported by the early initialization code as
'nosave' may be invalid.  If we try to set the corresponding bits in the
hibernation bitmap, BUG_ON() in memory_bm_find_bit() will be triggered and
the system won't be able to boot (cf.
https://bugzilla.novell.com/show_bug.cgi?id=296242).

Prevent this from happening by verifying if the 'nosave' PFNs are valid in
mark_nosave_pages().

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoeCryptfs: fix error handling in ecryptfs_init
Ryusuke Konishi [Fri, 10 Aug 2007 20:00:56 +0000]
eCryptfs: fix error handling in ecryptfs_init

ecryptfs_init() exits without doing any cleanup jobs if
ecryptfs_init_messaging() fails.  In that case, eCryptfs leaves
sysfs entries, leaks memory, and causes an invalid page fault.
This patch fixes the problem.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Acked-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agolinux-audit list is subscribers-only
Gabriel C [Fri, 10 Aug 2007 20:00:56 +0000]
linux-audit list is subscribers-only

Signed-off-by: Gabriel Craciunescu <nix.or.die@googlemail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoRemove unused struct proc_dir_entry::set
Alexey Dobriyan [Fri, 10 Aug 2007 20:00:55 +0000]
Remove unused struct proc_dir_entry::set

After /proc/sys rewrite it was left unused.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoFix missing numa_zonelist_order sysctl
Lee Schermerhorn [Fri, 10 Aug 2007 20:00:51 +0000]
Fix missing numa_zonelist_order sysctl

Misplaced #endif is hiding the numa_zonelist_order sysctl when !SECURITY.

Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoeCryptfs: fix lookup error for special files
Ryusuke Konishi [Fri, 10 Aug 2007 20:00:51 +0000]
eCryptfs: fix lookup error for special files

When ecryptfs_lookup() is called against special files, eCryptfs generates
the following errors because it tries to treat them like regular eCryptfs
files.

Error opening lower file for lower_dentry [0xffff810233a6f150], lower_mnt [0xffff810235bb4c80], and flags
[0x8000]
Error opening lower_file to read header region
Error attempting to read the [user.ecryptfs] xattr from the lower file; return value = [-95]
Valid metadata not found in header region or xattr region; treating file as unencrypted

For instance, the problem can be reproduced by the steps below.

  # mkdir /root/crypt /mnt/crypt
  # mount -t ecryptfs /root/crypt /mnt/crypt
  # mknod /mnt/crypt/c0 c 0 0
  # umount /mnt/crypt
  # mount -t ecryptfs /root/crypt /mnt/crypt
  # ls -l /mnt/crypt

This patch fixes it by adding a check similar to directories and
symlinks.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Acked-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoFRV: connect up fallocate
David Howells [Fri, 10 Aug 2007 20:00:50 +0000]
FRV: connect up fallocate

Connect up the fallocate() system call.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agomatroxfb: rectify jitter (G450/G550)
Paul A. Clarke [Fri, 10 Aug 2007 20:00:49 +0000]
matroxfb: rectify jitter (G450/G550)

This builds upon my previous attempts to resolve some jitter problems seen
with the Matrox G450 and G550 -based cards, including odd disparities observed
between x86 and Power -based machines in a somewhat less hackish way (removing
the hacked ifdefs).

Apparently, preference should be given to use the DVI PLL when frequencies
permit, the Standard PLL otherwise.  The max pixel clock for the panellink
interface is extracted from the PInS information on the card and used as a
limit to determine which PLL to use.

Signed-off-by: Paul A. Clarke <pc@us.ibm.com>
Acked-by: Petr Vandrovec <petr@vandrovec.name>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agopvr2fb: update Documentation/fb/pvr2fb.txt
Adrian McMenamin [Fri, 10 Aug 2007 20:00:48 +0000]
pvr2fb: update Documentation/fb/pvr2fb.txt

The current version is very old and does not correctly specify how to
set the video mode.

Signed-off by: Adrian McMenamin <adrian@mcmen.demon.co.uk>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agopvr2fb: Consolidated cleanup of pvr2fb.c
Adrian McMenamin [Fri, 10 Aug 2007 20:00:48 +0000]
pvr2fb: Consolidated cleanup of pvr2fb.c

- better handling of the pvr2 registers based on more up to date information.

Testing shows that it seems to work pretty well at 16bpp, 24bpp and 32bpp -
including proper rendering of the boot logo at all levels (previously this was
a bit broken even at 16bpp) and giving white against black text.  Really
detailed testing (eg with X11) requires support for the maple bus - which
isn't (currently - next project assuming this is okay) available, but I have
no reason to think this is broken.

Signed-off by: Adrian McMenamin <adrian@mcmen.demon.co.uk>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agopvr2fb: Fix oops when pseudo_palette is written
Antonino A. Daplas [Fri, 10 Aug 2007 20:00:47 +0000]
pvr2fb: Fix oops when pseudo_palette is written

Reported by: Adrian McMenamin <adrianmcmenamin@gmail.com>

This driver will oops when the pseudo_palette[] is written as u32 but not when
written as u16.  When written as u32, it corrupts the adjacent 'mmio_base'
field of struct pvr2fb_par.  Fix by using framebuffer_alloc()/release() to
allocate struct fb_info and struct pvr2fb_par, and create the pseudo_palette[]
as part of struct pvr2fb_par.

Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agofbcon: Kill compile warning
Antonino A. Daplas [Fri, 10 Aug 2007 20:00:46 +0000]
fbcon: Kill compile warning

Fix compile warning ('map_override unused') if fbcon is compiled as a module
and CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=n.

[akpm@linux-foundation.org: cleanup]
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agostifb: detect cards in double buffer mode more reliably
Helge Deller [Fri, 10 Aug 2007 20:00:45 +0000]
stifb: detect cards in double buffer mode more reliably

Visualize-EG, Graffiti and A4450A graphics cards on PARISC can
be configured in double-buffer and standard mode, but the stifb
driver supports standard mode only.
This patch detects double-buffered cards more reliable.

It is a real bugfix for a very nasty problem for all parisc users which have
wrongly configured their graphic card.  The problem: The stifb graphics driver
will not detect that the card is wrongly configured and then nevertheless just
enables the graphics mode, which it shouldn't.  In the end, the user will see
no further updates / boot messages on the screen.

We had documented this problem already on our FAQ
(http://parisc-linux.org/faq/index.html#viseg "Why do I get corrupted graphics
with my Vis-EG/Graffiti/A4450A card?") but people still run into this problem.
 So having this fix in as early as possible can help us.

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Cc: <stable@kernel.org>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agodirect-io: fix error-path crashes
Badari Pulavarty [Fri, 10 Aug 2007 20:00:44 +0000]
direct-io: fix error-path crashes

Need to initialize map_bh.b_state to zero.  Otherwise, in case of a faulty
user-buffer its possible to go into dio_zero_block() and submit a page by
mistake - since it checks for buffer_new().

http://marc.info/?l=linux-kernel&m=118551339032528&w=2

akpm: Linus had a (better) patch to just do a kzalloc() in there, but it got
lost.  Probably this version is better for -stable anwyay.

Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Acked-by: Joe Jin <joe.jin@oracle.com>
Acked-by: Zach Brown <zach.brown@oracle.com>
Cc: gurudas pai <gurudas.pai@oracle.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agox86_64: fix HPET init race
Robin Holt [Fri, 10 Aug 2007 20:00:43 +0000]
x86_64: fix HPET init race

I have had four seperate system lockups attributable to this exact problem
in two days of testing.  Instead of trying to handle all the weird end
cases and wrap, how about changing it to look for exactly what we appear
to want.

The following patch removes a couple races in setup_APIC_timer.  One occurs
when the HPET advances the COUNTER past the T0_CMP value between the time
the T0_CMP was originally read and when COUNTER is read.  This results in
a delay waiting for the counter to wrap.  The other results from the counter
wrapping.

This change takes a snapshot of T0_CMP at the beginning of the loop and
simply loops until T0_CMP has changed (a tick has happened).

<later>

I have one small concern about the patch.  I am not sure it meets the intent
as well as it should.  I think we are trying to match APIC timer interrupts up
with the hpet counter increment.  The event which appears to be disturbing
this loop in our test environment is the NMI watchdog.  What we believe has
been happening with the existing code is the setup_APIC_timer loop has read
the CMP value, and the NMI watchdog code fires for the first time.  This
results in a series of icache miss slowdowns and by the time we get back to
things it has wrapped.

I think this code is trying to get the CMP as close to the counter value as
possible.  If that is the intent, maybe we should really be testing against a
"window" around the CMP.  Something like COUNTER = CMP+/2.  It appears COUNTER
should get advanced every 89nSec (IIRC).  The above seems like an unreasonably
small window, but may be necessary.  Without documentation, I am not sure of
the original intent with this code.

In summary, this code fixes my boot hangs, but since I am not certain of the
intent of the existing code, I am not certain this has not introduced new bugs
or unexpected behaviors.

Signed-off-by: Robin Holt <holt@sgi.com>
Acked-by: Andi Kleen <ak@suse.de>
Cc: Vojtech Pavlik <vojtech@suse.cz>
Cc: "Aaron Durbin" <adurbin@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoBlackfin arch: after removing fs.h from mm.h, fix the broken on Blackfin arch
Bryan Wu [Fri, 10 Aug 2007 20:00:42 +0000]
Blackfin arch: after removing fs.h from mm.h, fix the broken on Blackfin arch

Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoBLOCK: Hide the contents of linux/bio.h if CONFIG_BLOCK=n
David Howells [Sat, 11 Aug 2007 20:34:32 +0000]
BLOCK: Hide the contents of linux/bio.h if CONFIG_BLOCK=n

Hide the contents of linux/bio.h if CONFIG_BLOCK=n as there shouldn't be
compiled code that uses it.

Signed-off-by: David Howells <dhowells@redhat.com>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

12 years agosysace: HDIO_GETGEO has it's own method for ages
Christoph Hellwig [Sat, 11 Aug 2007 20:34:31 +0000]
sysace: HDIO_GETGEO has it's own method for ages

The way this driver tries to implement HDIO_GETGEO it'll never be called.
Then again on ppc it probably will never be called anyway because it's
utterly pointless.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

12 years agodrivers/block/cpqarray.c: better error handling and kmalloc + memset conversion to...
Mariusz Kozlowski [Sat, 11 Aug 2007 20:34:30 +0000]
drivers/block/cpqarray.c: better error handling and kmalloc + memset conversion to k[cz]alloc

This patch removes some redundant casts, does the kmalloc + memset to
k[cz]alloc conversion and it changes the error path to use goto (to avoid code
duplication).

 drivers/block/cpqarray.c | 49567 -> 48623 (-944 bytes)
 drivers/block/cpqarray.o | 178820 -> 178288 (-532 bytes)

Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Acked-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

12 years agodrivers/block/cciss.c: kmalloc + memset conversion to kzalloc
Mariusz Kozlowski [Sat, 11 Aug 2007 20:34:29 +0000]
drivers/block/cciss.c: kmalloc + memset conversion to kzalloc

 drivers/block/cciss.c | 104285 -> 104168 (-117 bytes)
 drivers/block/cciss.o | 277400 -> 277124 (-276 bytes)

Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Acked-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

12 years agoClean up duplicate includes in drivers/block/
Jesper Juhl [Sat, 11 Aug 2007 20:34:27 +0000]
Clean up duplicate includes in drivers/block/

This patch cleans up duplicate includes in
drivers/block/

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Satyam Sharma <satyam.sharma@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

12 years agoFix remap handling by blktrace
Alan D. Brunelle [Tue, 7 Aug 2007 13:30:23 +0000]
Fix remap handling by blktrace

This patch provides more information concerning REMAP operations on block
IOs. The additional information provides clearer details at the user level,
and supports post-processing analysis in btt.

o  Adds in partition remaps on the same device.
o  Fixed up the remap information in DM to be in the right order
o  Sent up mapped-from and mapped-to device information

Signed-off-by: Alan D. Brunelle <alan.brunelle@hp.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

12 years ago[PATCH] remove mm/filemap.c:file_send_actor()
Adrian Bunk [Mon, 30 Jul 2007 06:24:27 +0000]
[PATCH] remove mm/filemap.c:file_send_actor()

This patch removes the no longer used file_send_actor().

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

12 years agosched debug: dont print kernel address in /proc/sched_debug
Ingo Molnar [Fri, 10 Aug 2007 21:05:11 +0000]
sched debug: dont print kernel address in /proc/sched_debug

Arjan van de Ven pointed out that we should not print kernel addresses
in world-readable /proc files - fix that.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>

12 years agosched: fix typo in the FAIR_GROUP_SCHED branch
Ingo Molnar [Fri, 10 Aug 2007 21:05:11 +0000]
sched: fix typo in the FAIR_GROUP_SCHED branch

while there's no in-tree way to turn group scheduling at the moment,
fix a typo in it nevertheless.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agosched: improve rq-clock overflow logic
Ingo Molnar [Fri, 10 Aug 2007 21:05:11 +0000]
sched: improve rq-clock overflow logic

improve the rq-clock overflow logic: limit the absolute rq->clock
delta since the last scheduler tick, instead of limiting the delta
itself.

tested by Arjan van de Ven - whole laptop was misbehaving due to
an incorrectly calibrated cpu_khz confusing sched_clock().

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>

12 years agoSLUB: Fix format specifier in Documentation/vm/slabinfo.c
Jesper Juhl [Wed, 8 Aug 2007 23:31:30 +0000]
SLUB: Fix format specifier in Documentation/vm/slabinfo.c

There's a little problem in Documentation/vm/slabinfo.c
The code is using "%d" in a printf() call to print an 'unsigned long'.
This patch corrects it to use "%lu" instead.

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Christoph Lameter <clameter@sgi.com>

12 years agoSLUB: Fix dynamic dma kmalloc cache creation
Christoph Lameter [Tue, 7 Aug 2007 22:11:48 +0000]
SLUB: Fix dynamic dma kmalloc cache creation

The dynamic dma kmalloc creation can run into trouble if a
GFP_ATOMIC allocation is the first one performed for a certain size
of dma kmalloc slab.

- Move the adding of the slab to sysfs into a workqueue
  (sysfs does GFP_KERNEL allocations)
- Do not call kmem_cache_destroy() (uses slub_lock)
- Only acquire the slub_lock once and--if we cannot wait--do a trylock.

  This introduces a slight risk of the first kmalloc(x, GFP_DMA|GFP_ATOMIC)
  for a range of sizes failing due to another process holding the slub_lock.
  However, we only need to acquire the spinlock once in order to establish
  each power of two DMA kmalloc cache. The possible conflict is with the
  slub_lock taken during slab management actions (create / remove slab cache).

  It is rather typical that a driver will first fill its buffers using
  GFP_KERNEL allocations which will wait until the slub_lock can be acquired.
  Drivers will also create its slab caches first outside of an atomic
  context before starting to use atomic kmalloc from an interrupt context.

  If there are any failures then they will occur early after boot or when
  loading of multiple drivers concurrently. Drivers can already accomodate
  failures of GFP_ATOMIC for other reasons. Retries will then create the slab.

Signed-off-by: Christoph Lameter <clameter@sgi.com>

12 years agoSLUB: Remove checks for MAX_PARTIAL from kmem_cache_shrink
Christoph Lameter [Mon, 30 Jul 2007 20:06:46 +0000]
SLUB: Remove checks for MAX_PARTIAL from kmem_cache_shrink

The MAX_PARTIAL checks were supposed to be an optimization. However, slab
shrinking is a manually triggered process either through running slabinfo
or by the kernel calling kmem_cache_shrink.

If one really wants to shrink a slab then all operations should be done
regardless of the size of the partial list. This also fixes an issue that
could surface if the number of partial slabs was initially above MAX_PARTIAL
in kmem_cache_shrink and later drops below MAX_PARTIAL through the
elimination of empty slabs on the partial list (rare). In that case a few
slabs may be left off the partial list (and only be put back when they
are empty).

Signed-off-by: Christoph Lameter <clameter@sgi.com>

12 years agoremove dubious legal statment from uio-howto
Alan Cox [Wed, 8 Aug 2007 23:57:54 +0000]
remove dubious legal statment from uio-howto

UIO currently contains a rather dubious statement which wants removing.

The actual questions around whether user space code that depends tightly
on kernel GPL code designed to co-work with it are derivative works of
the kernel is extremely complex, and since we don't have space for either
a masters length essay on legal issues or need to start flamewars lets
simply remove the comment and leave law to lawyers

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <tovalds@linux-foundation.org>

12 years agoFix Alpha O_CLOEXEC definition
Richard Henderson [Wed, 8 Aug 2007 20:17:08 +0000]
Fix Alpha O_CLOEXEC definition

The default definition in asm-generic conflicts with Alpha's O_DIRECT,
so, like several other arches, it needs to be redefined.

Signed-off-by: Richard Hendersion <rth@twiddle.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoMerge git://git.linux-nfs.org/pub/linux/nfs-2.6
Linus Torvalds [Thu, 9 Aug 2007 15:38:14 +0000]
Merge git://git.linux-nfs.org/pub/linux/nfs-2.6

* git://git.linux-nfs.org/pub/linux/nfs-2.6:
  SUNRPC: Replace flush_workqueue() with cancel_work_sync() and friends
  NFS: Replace flush_scheduled_work with cancel_work_sync() and friends
  SUNRPC: Don't call gss_delete_sec_context() from an rcu context
  NFSv4: Don't call put_rpccred() from an rcu callback
  NFS: Fix NFSv4 open stateid regressions
  NFSv4: Fix a locking regression in nfs4_set_mode_locked()
  NFS: Fix put_nfs_open_context
  SUNRPC: Fix a race in rpciod_down()

12 years agohexdump: use const notation
Artem Bityutskiy [Tue, 7 Aug 2007 20:43:14 +0000]
hexdump: use const notation

Trivial fix: mark the buffer to hexdump as const so callers could avoid
casting their const buffers when calling print_hex_dump().

The patch is really trivial and I suggest to consider it as a fix
(it fixes GCC warnings) and push it to current tree.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoMerge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Thu, 9 Aug 2007 15:31:03 +0000]
Merge branch 'master' of /linux/kernel/git/davem/net-2.6

* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [TCP]: H-TCP maxRTT estimation at startup
  [NETFILTER]: nf_nat: add symbolic dependency on IPv4 conntrack
  [NETFILTER]: ctnetlink: return EEXIST instead of EINVAL for existing nat'ed conntracks
  [NETFILTER]: ipt_recent: avoid a possible NULL pointer deref in recent_seq_open()
  [NET] net/core/utils: fix sparse warning
  [NetLabel]: add missing rcu_dereference() calls in the LSM domain mapping hash table
  [PATCH] mac80211: don't allow scanning in monitor mode
  [PATCH] mac80211: Fix sparse error for sta_last_seq_ctrl_read
  [PATCH] mac80211: use do { } while (0) for multi-line macros
  [PATCH] mac80211: missing dev_put in ieee80211_master_start_xmit

12 years agoMerge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6
Linus Torvalds [Thu, 9 Aug 2007 15:27:25 +0000]
Merge branch 'master' of /linux/kernel/git/davem/sparc-2.6

* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC64]: Fix memory leak when cpu hotplugging.
  [SPARC64]: Do not assume sun4v chips have load-twin/store-init support.
  [SPARC64]: Fix hard-coding of cpu type output in /proc/cpuinfo on sun4v.
  [SPARC]: Centralize find_in_proplist() instead of duplicating N times.

12 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc
Linus Torvalds [Thu, 9 Aug 2007 15:23:47 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/drzeus/mmc

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc:
  mmc: at91_mci: remove whitespace at the end of lines
  mmc: reorganize bounce buffer init
  wbsd: fix section mismatch warnings

12 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched
Linus Torvalds [Thu, 9 Aug 2007 15:23:31 +0000]
Merge git://git./linux/kernel/git/mingo/linux-2.6-sched

* git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched: (61 commits)
  sched: refine negative nice level granularity
  sched: fix update_stats_enqueue() reniced codepath
  sched: round a bit better
  sched: make the multiplication table more accurate
  sched: optimize update_rq_clock() calls in the load-balancer
  sched: optimize activate_task()
  sched: clean up set_curr_task_fair()
  sched: remove __update_rq_clock() call from entity_tick()
  sched: move the __update_rq_clock() call to scheduler_tick()
  sched debug: remove the 'u64 now' parameter from print_task()/_rq()
  sched: remove the 'u64 now' local variables
  sched: remove the 'u64 now' parameter from deactivate_task()
  sched: remove the 'u64 now' parameter from dequeue_task()
  sched: remove the 'u64 now' parameter from enqueue_task()
  sched: remove the 'u64 now' parameter from dec_nr_running()
  sched: remove the 'u64 now' parameter from inc_nr_running()
  sched: remove the 'u64 now' parameter from dec_load()
  sched: remove the 'u64 now' parameter from inc_load()
  sched: remove the 'u64 now' parameter from update_curr_load()
  sched: remove the 'u64 now' parameter from ->task_new()
  ...

12 years agolguest: avoid shared libraries mapped over guest memory
Ronald G. Minnich [Thu, 9 Aug 2007 11:07:24 +0000]
lguest: avoid shared libraries mapped over guest memory

Some versions of ld.so mmap the shared libraries right in over guest
memory, so compile lguest statically by default.

[ FC7 maps shared libraries very low, where the launcher maps guest's
  physical memory.  Quick fix is to link Launcher static, real fix is
  for 2.6.24. ]

-static is a simple fix. I expect this problem will be more common than we
like, as different distro's make different "improvements" to ld.so

Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agolguest: Fix Malicious Guest GDT Host Crash
Rusty Russell [Thu, 9 Aug 2007 10:57:13 +0000]
lguest: Fix Malicious Guest GDT Host Crash

If a Guest makes hypercall which sets a GDT entry to not present, we
currently set any segment registers using that GDT entry to 0.
Unfortunately, this is not sufficient: there are other ways of
altering GDT entries which will cause a fault.

The correct solution to do what Linux does: let them set any GDT value
they want and handle the #GP when popping causes a fault.  This has
the added benefit of making our Switcher slightly more robust in the
case of any other bugs which cause it to fault.

We kill the Guest if it causes a fault in the Switcher: it's the
Guest's responsibility to make sure it's not using segments when it
changes them.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoFix non-TSC guest clocksource lockup
Rusty Russell [Thu, 9 Aug 2007 10:52:35 +0000]
Fix non-TSC guest clocksource lockup

lguest uses a host-supplied wallclock-based clocksource when the TSC
is not reliable.  As this is already in nanoseconds, I naively used a
multiplier of 1 and a shift of 0.

But update_wall_time() in its infinite wisdom decides to adjust the
clock a little (where does it think it's getting a more accurate time
from?)

It will happily tweak the multiplier... to 0, then -1.

So the "fix" is to use a shift of 22 like everyone else, and a
multiplier of 1 << 22.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoRevert "genirq: temporary fix for level-triggered IRQ resend"
Linus Torvalds [Thu, 9 Aug 2007 15:10:16 +0000]
Revert "genirq: temporary fix for level-triggered IRQ resend"

This reverts commit 0fc4969b866671dfe39b1a9119d0fdc7ea0f63e5.  It was
always meant to be temporary, but it's generating more useless noise
than anything else, and we probably should never have done it in the
generic kernel (only had the people involved test it on their own).

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agommc: at91_mci: remove whitespace at the end of lines
Nicolas Ferre [Wed, 8 Aug 2007 10:01:44 +0000]
mmc: at91_mci: remove whitespace at the end of lines

Some cleanup with whitespace/tab at the end of lines.

Signed-off-by: Nicolas Ferre <nicolas.ferre@rfo.atmel.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>

12 years agommc: reorganize bounce buffer init
Pierre Ossman [Thu, 9 Aug 2007 12:28:02 +0000]
mmc: reorganize bounce buffer init

Reorganize the code that initializes mmc_block's bounce buffer in
order to avoid warnings when MMC_BLOCK_BOUNCE isn't used.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>

12 years agowbsd: fix section mismatch warnings
Gabriel C [Thu, 2 Aug 2007 18:20:44 +0000]
wbsd: fix section mismatch warnings

This patch fixes the following section mismatch warnings

...

WARNING: vmlinux.o(.init.text+0x29d40): Section mismatch: reference to .exit.text:wbsd_release_resources (between 'wbsd_init' and 'wbsd_probe')
WARNING: vmlinux.o(.init.text+0x29d49): Section mismatch: reference to .exit.text:wbsd_free_mmc (between 'wbsd_init' and 'wbsd_probe')
WARNING: vmlinux.o(.init.text+0x29f28): Section mismatch: reference to .exit.text:wbsd_free_mmc (between 'wbsd_init' and 'wbsd_probe')

...

Signed-off-by: Gabriel Craciunescu <nix.or.die@googlemail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>

12 years agosched: refine negative nice level granularity
Ingo Molnar [Thu, 9 Aug 2007 09:16:52 +0000]
sched: refine negative nice level granularity

refine the granularity of negative nice level tasks: let them
reschedule more often to offset the effect of them consuming
their wait_runtime proportionately slower. (This makes nice-0
task scheduling smoother in the presence of negatively
reniced tasks.)

Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agosched: fix update_stats_enqueue() reniced codepath
Ingo Molnar [Thu, 9 Aug 2007 09:16:52 +0000]
sched: fix update_stats_enqueue() reniced codepath

the key has to be rescaled to /weight even if it has a positive value.

(this change only affects the scheduling of reniced tasks)

Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agosched: round a bit better
Ingo Molnar [Thu, 9 Aug 2007 09:16:51 +0000]
sched: round a bit better

round a tiny bit better in high-frequency rescheduling scenarios,
by rounding around zero instead of rounding down.

(this is pretty theoretical though)

Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agosched: make the multiplication table more accurate
Ingo Molnar [Thu, 9 Aug 2007 09:16:51 +0000]
sched: make the multiplication table more accurate

do small deltas in the weight and multiplication constant table so
that the worst-case numeric error is better than 1:100000000. (8 digits)

the current error table is:

     nice       mult *   inv_mult   error
     ------------------------------------------
     -20:      88761 *      48388  -0.0000000065
     -19:      71755 *      59856  -0.0000000037
     -18:      56483 *      76040   0.0000000056
     -17:      46273 *      92818   0.0000000042
     -16:      36291 *     118348  -0.0000000065
     -15:      29154 *     147320  -0.0000000037
     -14:      23254 *     184698  -0.0000000009
     -13:      18705 *     229616  -0.0000000037
     -12:      14949 *     287308  -0.0000000009
     -11:      11916 *     360437  -0.0000000009
     -10:       9548 *     449829  -0.0000000009
      -9:       7620 *     563644  -0.0000000037
      -8:       6100 *     704093   0.0000000009
      -7:       4904 *     875809   0.0000000093
      -6:       3906 *    1099582  -0.0000000009
      -5:       3121 *    1376151  -0.0000000058
      -4:       2501 *    1717300   0.0000000009
      -3:       1991 *    2157191  -0.0000000035
      -2:       1586 *    2708050   0.0000000009
      -1:       1277 *    3363326   0.0000000014
       0:       1024 *    4194304   0.0000000000
       1:        820 *    5237765   0.0000000009
       2:        655 *    6557202   0.0000000033
       3:        526 *    8165337  -0.0000000079
       4:        423 *   10153587   0.0000000012
       5:        335 *   12820798   0.0000000079
       6:        272 *   15790321   0.0000000037
       7:        215 *   19976592  -0.0000000037
       8:        172 *   24970740  -0.0000000037
       9:        137 *   31350126  -0.0000000079
      10:        110 *   39045157  -0.0000000061
      11:         87 *   49367440  -0.0000000037
      12:         70 *   61356676   0.0000000056
      13:         56 *   76695844  -0.0000000075
      14:         45 *   95443717  -0.0000000072
      15:         36 *  119304647  -0.0000000009
      16:         29 *  148102320  -0.0000000037
      17:         23 *  186737708  -0.0000000028
      18:         18 *  238609294  -0.0000000009
      19:         15 *  286331153  -0.0000000002

Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agosched: optimize update_rq_clock() calls in the load-balancer
Ingo Molnar [Thu, 9 Aug 2007 09:16:51 +0000]
sched: optimize update_rq_clock() calls in the load-balancer

optimize update_rq_clock() calls in the load-balancer: update them
right after locking the runqueue(s) so that the pull functions do
not have to call it.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agosched: optimize activate_task()
Ingo Molnar [Thu, 9 Aug 2007 09:16:51 +0000]
sched: optimize activate_task()

optimize activate_task() by removing update_rq_clock() from it.
(and add update_rq_clock() to all callsites of activate_task() that
did not have it before.)

Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agosched: clean up set_curr_task_fair()
Ingo Molnar [Thu, 9 Aug 2007 09:16:51 +0000]
sched: clean up set_curr_task_fair()

clean up set_curr_task_fair().

( identity transformation that causes no change in functionality. )

   text    data     bss     dec     hex filename
  39170    3750      36   42956    a7cc sched.o.before
  39170    3750      36   42956    a7cc sched.o.after

Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agosched: remove __update_rq_clock() call from entity_tick()
Ingo Molnar [Thu, 9 Aug 2007 09:16:51 +0000]
sched: remove __update_rq_clock() call from entity_tick()

remove __update_rq_clock() call from entity_tick().

no change in functionality because scheduler_tick() already calls
__update_rq_clock().

Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agosched: move the __update_rq_clock() call to scheduler_tick()
Ingo Molnar [Thu, 9 Aug 2007 09:16:51 +0000]
sched: move the __update_rq_clock() call to scheduler_tick()

move the __update_rq_clock() call from update_cpu_load() to
scheduler_tick().

( identity transformation that causes no change in functionality. )

this allows the direct use of rq->clock in ->task_tick() functions.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agosched debug: remove the 'u64 now' parameter from print_task()/_rq()
Ingo Molnar [Thu, 9 Aug 2007 09:16:51 +0000]
sched debug: remove the 'u64 now' parameter from print_task()/_rq()

remove the 'u64 now' parameter from sched_debug.c:print_task()/_rq().

( identity transformation that causes no change in functionality. )

Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agosched: remove the 'u64 now' local variables
Ingo Molnar [Thu, 9 Aug 2007 09:16:51 +0000]
sched: remove the 'u64 now' local variables

final step: remove all (now superfluous) 'u64 now' variables.

( identity transformation that causes no change in functionality. )

Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agosched: remove the 'u64 now' parameter from deactivate_task()
Ingo Molnar [Thu, 9 Aug 2007 09:16:49 +0000]
sched: remove the 'u64 now' parameter from deactivate_task()

remove the 'u64 now' parameter from deactivate_task().

( identity transformation that causes no change in functionality. )

Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agosched: remove the 'u64 now' parameter from dequeue_task()
Ingo Molnar [Thu, 9 Aug 2007 09:16:49 +0000]
sched: remove the 'u64 now' parameter from dequeue_task()

remove the 'u64 now' parameter from dequeue_task().

( identity transformation that causes no change in functionality. )

Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agosched: remove the 'u64 now' parameter from enqueue_task()
Ingo Molnar [Thu, 9 Aug 2007 09:16:49 +0000]
sched: remove the 'u64 now' parameter from enqueue_task()

remove the 'u64 now' parameter from enqueue_task().

( identity transformation that causes no change in functionality. )

Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agosched: remove the 'u64 now' parameter from dec_nr_running()
Ingo Molnar [Thu, 9 Aug 2007 09:16:49 +0000]
sched: remove the 'u64 now' parameter from dec_nr_running()

remove the 'u64 now' parameter from dec_nr_running().

( identity transformation that causes no change in functionality. )

Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agosched: remove the 'u64 now' parameter from inc_nr_running()
Ingo Molnar [Thu, 9 Aug 2007 09:16:49 +0000]
sched: remove the 'u64 now' parameter from inc_nr_running()

remove the 'u64 now' parameter from inc_nr_running().

( identity transformation that causes no change in functionality. )

Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agosched: remove the 'u64 now' parameter from dec_load()
Ingo Molnar [Thu, 9 Aug 2007 09:16:49 +0000]
sched: remove the 'u64 now' parameter from dec_load()

remove the 'u64 now' parameter from dec_load().

( identity transformation that causes no change in functionality. )

Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agosched: remove the 'u64 now' parameter from inc_load()
Ingo Molnar [Thu, 9 Aug 2007 09:16:49 +0000]
sched: remove the 'u64 now' parameter from inc_load()

remove the 'u64 now' parameter from inc_load().

( identity transformation that causes no change in functionality. )

Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agosched: remove the 'u64 now' parameter from update_curr_load()
Ingo Molnar [Thu, 9 Aug 2007 09:16:49 +0000]
sched: remove the 'u64 now' parameter from update_curr_load()

remove the 'u64 now' parameter from update_curr_load().

( identity transformation that causes no change in functionality. )

Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agosched: remove the 'u64 now' parameter from ->task_new()
Ingo Molnar [Thu, 9 Aug 2007 09:16:49 +0000]
sched: remove the 'u64 now' parameter from ->task_new()

remove the 'u64 now' parameter from ->task_new().

( identity transformation that causes no change in functionality. )

Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agosched: remove the 'u64 now' parameter from ->put_prev_task()
Ingo Molnar [Thu, 9 Aug 2007 09:16:49 +0000]
sched: remove the 'u64 now' parameter from ->put_prev_task()

remove the 'u64 now' parameter from ->put_prev_task().

( identity transformation that causes no change in functionality. )

Signed-off-by: Ingo Molnar <mingo@elte.hu>