8 years agoppp: Move ioctl definitions from if_ppp.h to new ppp-ioctl.h
Paul Mackerras [Sun, 4 Mar 2012 12:56:04 +0000]
ppp: Move ioctl definitions from if_ppp.h to new ppp-ioctl.h

This moves the definitions of the ioctls, constants and structures
relating to the ppp_generic interface to userspace out from if_ppp.h
to a new file, ppp-ioctl.h.  The new file has my copyright since I
designed and implemented the ppp_generic interface in the late 1990s.
None of the contents of this file comes from the original if_ppp.h
published by Carnegie Mellon University.

Of the remainder of if_ppp.h, only the PPP_MTU definition was being
used, and this replaces the uses of it with PPP_MRU (which is identical).
Therefore, this replaces the entire file with the single line

#include <linux/ppp-ioctl.h>

which clearly doesn't contain any CMU code.  Thus I have removed the
CMU copyright notice with its problematic advertising clause, and in
fact since it's only one trivial line I have not added any other
copyright notice.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoppp: Change copyright notices from ANU to me
Paul Mackerras [Sun, 4 Mar 2012 12:54:54 +0000]
ppp: Change copyright notices from ANU to me

This changes the copyright notices on the PPP code that I developed
in the late 1990s from being copyright The Australian National
University to copyright Paul Mackerras.  I can do this as I have an
acknowledgement in writing from the Head of the Computer Science
Department at ANU (where I worked then) that ANU does not claim any
intellectual property in this code.

While I'm at it, change the copyright notice from BSD-style to
GNU GPL like the rest of the kernel.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agotg3: Fix poor tx performance on 57766 after MTU change
Michael Chan [Sun, 4 Mar 2012 14:48:15 +0000]
tg3: Fix poor tx performance on 57766 after MTU change

GRC reset causes the read DMA engine to go into a mode that breaks up
requests into 256 bytes.  A PHY reset is required to bring it back to
the normal mode.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agotg3: Add memory barriers to sync BD data
Michael Chan [Sun, 4 Mar 2012 14:48:14 +0000]
tg3: Add memory barriers to sync BD data

for weak memory model architectures to ensure that the chip will DMA
valid BD data.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Reviewed-by: Benjamin Li <benli@broadcom.com>
Reviewed-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agotg3: Fix jumbo loopback test on 5719
Michael Chan [Sun, 4 Mar 2012 14:48:13 +0000]
tg3: Fix jumbo loopback test on 5719

Loopback on 9K packet fails because the chip has a DMA limit of 4K.  The
loopback test logic uses a single BD for simplicity.  Fix it by reducing
the jumbo packet size to the DMA limit.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Reviewed-by: Benjamin Li <benli@broadcom.com>
Reviewed-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agomdio.h: Include linux/types.h
David S. Miller [Sat, 3 Mar 2012 20:04:45 +0000]
mdio.h: Include linux/types.h

Fixes:

/home/davem/src/GIT/net-next/usr/include/linux/mdio.h:271: found __[us]{8,16,32,64} type without #include <linux/types.h>

Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoMerge branch 'dccp' of git://eden-feed.erg.abdn.ac.uk/net-next
David S. Miller [Sat, 3 Mar 2012 19:57:11 +0000]
Merge branch 'dccp' of git://eden-feed.erg.abdn.ac.uk/net-next

8 years agodccp: fix bug in sequence number validation during connection setup
Samuel Jero [Mon, 27 Feb 2012 01:22:02 +0000]
dccp: fix bug in sequence number validation during connection setup

This fixes a bug in the sequence number validation during the initial handshake.

The code did not treat the initial sequence numbers ISS and ISR as read-only and
did not keep state for GSR and GSS as required by the specification. This causes
problems with retransmissions during the initial handshake, causing the
budding connection to be reset.

This patch now treats ISS/ISR as read-only and tracks GSS/GSR as required.

Signed-off-by: Samuel Jero <sj323707@ohio.edu>
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>

8 years agodccp ccid-3: replace incorrect BUG_ON
Gerrit Renker [Mon, 27 Feb 2012 19:29:44 +0000]
dccp ccid-3: replace incorrect BUG_ON

This replaces an unjustified BUG_ON(), which could get triggered under normal
conditions: X_calc can be 0 when p > 0. X would in this case be set to the
minimum, s/t_mbi. Its replacement avoids t_ipi = 0 (unbounded sending rate).

Thanks to Jordi, Victor and Xavier who reported this.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.uk>

8 years agonet: dcb: getnumtcs()/setnumtcs() should return an int
John Fastabend [Fri, 10 Feb 2012 03:19:41 +0000]
net: dcb: getnumtcs()/setnumtcs() should return an int

{g|s}etnumtcs() today returns a u8 that is only used by the DCB code
to verify no error occurred. Today the driver implementations return
negative error codes which end up being non-zero so the logic works
out but triggers some sparse warnings.

To fix the sparse warnings convert the return value to an int.

CC: Eilon Greenstein <eilong@broadcom.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

8 years agoixgbe: dcb: check setup_tc return codes
John Fastabend [Fri, 10 Feb 2012 03:19:35 +0000]
ixgbe: dcb: check setup_tc return codes

dcb netlink code calls setup_tc to init hardware traffic classes
to use for DCB. At some call sites the return values are not
checked for errors and in one case may return -EINVAL back to
the net/dcbnl.c caller which is expecting a u8.

This fixes some smatch hits and although failures are never
seen in practive its best to check return codes.

Reported-by: Dan Carenter <dan.carpenter@oracle.com>
Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

8 years agoe100: Show short v/s long rx length errors in ethtool stats.
Ben Greear [Fri, 17 Feb 2012 13:44:28 +0000]
e100: Show short v/s long rx length errors in ethtool stats.

Signed-off-by: Ben Greear <greearb@candelatech.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

8 years agoe100: Fix rx-over-length statistics.
Ben Greear [Fri, 17 Feb 2012 13:44:23 +0000]
e100: Fix rx-over-length statistics.

The old code would += the total errors every time
stats were gathered.  Instead, keep a count of short-pkt
and long-pkt counters and then simply add them together
for the rx-over-length stat.

Signed-off-by: Ben Greear <greearb@candelatech.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

8 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
David S. Miller [Thu, 1 Mar 2012 22:57:40 +0000]
Merge git://git./linux/kernel/git/davem/net

Conflicts:
drivers/net/ethernet/broadcom/tg3.c

Conflicts in the statistics regression bug fix from 'net',
but happily Matt Carlson originally posted the fix against
'net-next' so I used that to resolve this.

Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoenic: fix an endian bug in enic_probe()
Dan Carpenter [Wed, 29 Feb 2012 21:19:54 +0000]
enic: fix an endian bug in enic_probe()

"num_vfs" is a u32 but we only use the high 16 bits and the low 16bits
are left as zero.  That isn't a problem for little endian systems but it
will break on big endian ones.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agopch_gbe: memory corruption calling pch_gbe_validate_option()
Dan Carpenter [Wed, 29 Feb 2012 21:17:08 +0000]
pch_gbe: memory corruption calling pch_gbe_validate_option()

pch_gbe_validate_option() modifies 32 bits of memory but we pass
&hw->phy.autoneg_advertised which only has 16 bits and &hw->mac.fc
which only has 8 bits.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agobe2net: Remove unused OFFSET_IN_PAGE() macro
Roland Dreier [Wed, 29 Feb 2012 20:40:46 +0000]
be2net: Remove unused OFFSET_IN_PAGE() macro

Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoethtool, mdio, mii: Specify MDIO information fields in struct ethtool_cmd
Ben Hutchings [Wed, 29 Feb 2012 14:26:22 +0000]
ethtool, mdio, mii: Specify MDIO information fields in struct ethtool_cmd

Add comments for ethtool_cmd::phy_address and
ethtool_cmd::mdio_support, and definitions of the flags currently
used in mdio_support.

In the mdio library, assert that its own flags continue to match those
in the ethtool interface.

In the mii library, use the ethtool flag definition and stop
including <linux/mdio.h>.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agomdio: Export mdio.h to userland
Ben Hutchings [Wed, 29 Feb 2012 14:23:27 +0000]
mdio: Export mdio.h to userland

The ID packing definitions are needed by userland and the register
definitions may also be useful there.

Do not export mdio_phy_id_{is_c45,prtad,devad}() as the use of bool is
problematic and it's not that useful to export only a subset of these.

Do not export MDIO_SUPPORTS_{C22,C45} directly; these flags are only
exposed to userland through struct ethtool_cmd so they should be
defined alongside that with appropriate names.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoMerge branch 'master' of git://1984.lsi.us.es/net
David S. Miller [Thu, 1 Mar 2012 20:40:36 +0000]
Merge branch 'master' of git://1984.lsi.us.es/net

8 years agortnetlink: Fix VF IFLA policy
Greg Rose [Wed, 8 Feb 2012 00:45:00 +0000]
rtnetlink: Fix VF IFLA policy

Add VF spoof check to IFLA policy.  The original patch I submitted to
add the spoof checking feature to rtnl failed to add the proper policy
rule that identifies the data type and len.  This patch corrects that
oversight.  No bugs have been reported against this but it may cause
some problem for the netlink message parsing that uses the policy
table.

CC: stable@vger.kernel.org
Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

8 years agoixgbe: Fix comments that are out of date or formatted incorrectly
Alexander Duyck [Fri, 10 Feb 2012 02:08:32 +0000]
ixgbe: Fix comments that are out of date or formatted incorrectly

This patch corrects several comments that are either incorrect or formatted
incorrectly for multiline comments.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

8 years agoixgbe: fix spelling errors
Don Skidmore [Tue, 28 Feb 2012 06:35:54 +0000]
ixgbe: fix spelling errors

Correct spelling error caught with codespell.py.

Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

8 years agoixgbe: Minor formatting and comment corrections for ixgbe_xmit_frame_ring
Alexander Duyck [Wed, 8 Feb 2012 07:49:33 +0000]
ixgbe: Minor formatting and comment corrections for ixgbe_xmit_frame_ring

This patch is meant to address several minor issues in
ixgbe_xmit_frame_ring.  Specifically it adds a comment explaining the TXSW
flag, and correctly wraps a line over 80 characters.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

8 years agoe1000e: use msleep instead of mdelay
Bruce Allan [Thu, 23 Feb 2012 03:31:29 +0000]
e1000e: use msleep instead of mdelay

The e1000_link_stall_workaround_lv() function is always called in non-
atomic context so it should use msleep instead of mdelay.  Also, remove
unnecessary #include <linux/delay.h>.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

8 years agoe1000e: cleanup whitespace and indentation
Bruce Allan [Thu, 23 Feb 2012 03:13:18 +0000]
e1000e: cleanup whitespace and indentation

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

8 years agoe1000e: cleanup incorrect filename in comment
Bruce Allan [Thu, 23 Feb 2012 03:13:13 +0000]
e1000e: cleanup incorrect filename in comment

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

8 years agoe100: Support RXALL feature flag.
Ben Greear [Fri, 17 Feb 2012 13:43:44 +0000]
e100: Support RXALL feature flag.

This allows the NIC to receive packets with bad FCS
and other errors.  Good for sniffing packets on flakey
networks.

v4:  Only flax rx-over-length errors if pkt is beyond
   maximum expected packet size, not just beyond the MTU.
   This matches the existing logic for this counter.

Signed-off-by: Ben Greear <greearb@candelatech.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

8 years agoe100: Support sending custom Ethernet CRC
Ben Greear [Sat, 11 Feb 2012 15:39:35 +0000]
e100: Support sending custom Ethernet CRC

This can aid with testing the RX logic for bad
CRCs.

Signed-off-by: Ben Greear <greearb@candelatech.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

8 years agoe100: Support RXFCS feature flag.
Ben Greear [Fri, 17 Feb 2012 13:43:05 +0000]
e100: Support RXFCS feature flag.

This allows e100 to be configured to append the
Ethernet FCS to the skb.

Useful for sniffing networks.

Signed-off-by: Ben Greear <greearb@candelatech.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

8 years agoMerge branch 'tipc_net-next' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg...
David S. Miller [Thu, 1 Mar 2012 04:52:12 +0000]
Merge branch 'tipc_net-next' of git://git./linux/kernel/git/paulg/linux

8 years agotg3: Fix tg3_get_stats64 for 5700 / 5701 devs
Matt Carlson [Tue, 28 Feb 2012 23:33:37 +0000]
tg3: Fix tg3_get_stats64 for 5700 / 5701 devs

tg3_get_stats64() takes tp->lock when dealing with non-serdes bcm5700
and bcm5701 devices.  However, functions that call tg3_halt() have
already acquired tp->lock.  When tg3_get_stats64() is called in
tg3_halt(), deadlock will occur.

This patch fixes the problem by separating the stat gathering code into
a new tg3_get_nstats() function.  tg3_get_stats64() is recoded to call
this function and take tp->lock.  The code that takes tp->lock in
tg3_calc_crc_errors() has been removed.  Function signatures have been
cleaned up too.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agotipc: Optimize setting of immutable payload message header fields
Allan Stephens [Wed, 9 Nov 2011 21:30:55 +0000]
tipc: Optimize setting of immutable payload message header fields

Optimizes routines that send payload messages so that they no longer
update the "originating node" and "originating port" fields of the
outgoing message header template, since these fields are initialized
when the sending port is created and never change thereafter. Also
optimizes the routine which updates the message header template when
a connection to a port is established, for the same reason.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

8 years agotipc: Eliminate obsolete code for re-sending a message
Allan Stephens [Wed, 9 Nov 2011 22:38:20 +0000]
tipc: Eliminate obsolete code for re-sending a message

Removes code that updated the "previous node" field of an out-going
message over TIPC's links. Such updating is unnecessary since the
removal of the prototype multi-cluster capability means that all
outgoing messages are generated locally and already have this field
populated correctly.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

8 years agotipc: Un-inline port routine for processing incoming messages
Allan Stephens [Wed, 9 Nov 2011 18:29:18 +0000]
tipc: Un-inline port routine for processing incoming messages

Converts a non-trivial routine from inline to non-inline form
to avoid bloating the TIPC code base with 6 copies of its body.

This change is essentially cosmetic, and doesn't change existing
TIPC behavior.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

8 years agomac89x0: Fix build error.
David S. Miller [Tue, 28 Feb 2012 20:48:42 +0000]
mac89x0: Fix build error.

Need to use the new 'saddr' variable not the void 'addr' in
set_mac_address().

Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoMerge tag 'batman-adv-for-davem' of git://git.open-mesh.org/linux-merge
David S. Miller [Tue, 28 Feb 2012 20:07:52 +0000]
Merge tag 'batman-adv-for-davem' of git://git.open-mesh.org/linux-merge

8 years agotcp: fix false reordering signal in tcp_shifted_skb
Neal Cardwell [Sun, 26 Feb 2012 10:06:19 +0000]
tcp: fix false reordering signal in tcp_shifted_skb

When tcp_shifted_skb() shifts bytes from the skb that is currently
pointed to by 'highest_sack' then the increment of
TCP_SKB_CB(skb)->seq implicitly advances tcp_highest_sack_seq(). This
implicit advancement, combined with the recent fix to pass the correct
SACKed range into tcp_sacktag_one(), caused tcp_sacktag_one() to think
that the newly SACKed range was before the tcp_highest_sack_seq(),
leading to a call to tcp_update_reordering() with a degree of
reordering matching the size of the newly SACKed range (typically just
1 packet, which is a NOP, but potentially larger).

This commit fixes this by simply calling tcp_sacktag_one() before the
TCP_SKB_CB(skb)->seq advancement that can advance our notion of the
highest SACKed sequence.

Correspondingly, we can simplify the code a little now that
tcp_shifted_skb() should update the lost_cnt_hint in all cases where
skb == tp->lost_skb_hint.

Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agotcp: fix comment for tp->highest_sack
Neal Cardwell [Mon, 27 Feb 2012 22:52:52 +0000]
tcp: fix comment for tp->highest_sack

There was an off-by-one error in the comments describing the
highest_sack field in struct tcp_sock. The comments previously claimed
that it was the "start sequence of the highest skb with SACKed
bit". This commit fixes the comments to note that it is the "start
sequence of the skb just *after* the highest skb with SACKed bit".

Signed-off-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agobatman-adv: Fix indentation of multiline statements
Sven Eckelmann [Tue, 28 Feb 2012 09:55:36 +0000]
batman-adv: Fix indentation of multiline statements

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

8 years agogigaset: Use semicolons to terminate statements
Joe Perches [Mon, 27 Feb 2012 19:12:07 +0000]
gigaset: Use semicolons to terminate statements

Commas are not generally used at locations where
statement termination semicolons are used.

Realign each field set at appropriate indentation.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirel...
John W. Linville [Mon, 27 Feb 2012 18:14:47 +0000]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless into for-davem

8 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
David S. Miller [Mon, 27 Feb 2012 02:55:51 +0000]
Merge git://git./linux/kernel/git/davem/net

Conflicts:
drivers/net/ethernet/sfc/rx.c

Overlapping changes in drivers/net/ethernet/sfc/rx.c, one to change
the rx_buf->is_page boolean into a set of u16 flags, and another to
adjust how ->ip_summed is initialized.

Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Linus Torvalds [Sun, 26 Feb 2012 20:47:17 +0000]
Merge git://git./linux/kernel/git/davem/net

1) ICMP sockets leave err uninitialized but we try to return it for the
   unsupported MSG_OOB case, reported by Dave Jones.

2) Add new Zaurus device ID entries, from Dave Jones.

3) Pointer calculation in hso driver memset is wrong, from Dan
   Carpenter.

4) ks8851_probe() checks unsigned value as negative, fix also from Dan
   Carpenter.

5) Fix crashes in atl1c driver due to TX queue handling, from Eric
   Dumazet.  I anticipate some TX side locking fixes coming in the near
   future for this driver as well.

6) The inline directive fix in Bluetooth which was breaking the build
   only with very new versions of GCC, from Johan Hedberg.

7) Fix crashes in the ATP CLIP code due to ARP cleanups this merge
   window, reported by Meelis Roos and fixed by Eric Dumazet.

8) JME driver doesn't flush RX FIFO correctly, from Guo-Fu Tseng.

9) Some ip6_route_output() callers test the return value for NULL, but
   this never happens as the convention is to return a dst entry with
   dst->error set.  Fixes from RonQing Li.

10) Logitech Harmony 900 should be handled by zaurus driver not
   cdc_ether, update white lists and black lists accordingly.  From
   Scott Talbert.

11) Receiving from certain kinds of devices there won't be a MAC header,
   so there is no MAC header to fixup in the IPSEC code, and if we try
   to do it we'll crash.  Fix from Eric Dumazet.

12) Port type array indexing off-by-one in mlx4 driver, fix from Yevgeny
   Petrilin.

13) Fix regression in link-down handling in davinci_emac which causes
   all RX descriptors to be freed up and therefore RX to wedge
   completely, from Christian Riesch.

14) It took two attempts, but ctnetlink soft lockups seem to be
   cured now, from Pablo Neira Ayuso.

15) Endianness bug fix in ENIC driver, from Santosh Nayak.

16) The long ago conversion of the PPP fragmentation code over to
   abstracted SKB list handling wasn't perfect, once we get an
   out of sequence SKB we don't flush the rest of them like we
   should.  From Ben McKeegan.

17) Fix regression of ->ip_summed initialization in sfc driver.
   From Ben Hutchings.

18) Bluetooth timeout mistakenly using msecs instead of jiffies,
   from Andrzej Kaczmarek.

19) Using _sync variant of work cancellation results in deadlocks,
   use the non _sync variants instead.  From Andre Guedes.

20) Bluetooth rfcomm code had reference counting problems leading
   to crashes, fix from Octavian Purdila.

21) The conversion of netem over to classful qdisc handling added
   two bugs to netem_dequeue(), fixes from Eric Dumazet.

22) Missing pci_iounmap() in ATM Solos driver.  Fix from Julia Lawall.

23) b44_pci_exit() should not have __exit tag since it's invoked from
   non-__exit code.  From Nikola Pajkovsky.

24) The conversion of the neighbour hash tables over to RCU added a
   race, fixed here by adding the necessary reread of tbl->nht, fix
   from Michel Machado.

25) When we added VF (virtual function) attributes for network device
   dumps, this potentially bloats up the size of the dump of one
   network device such that the dump size is too large for the buffer
   allocated by properly written netlink applications.

   In particular, if you add 255 VFs to a network device, parts of
   GLIBC stop working.

   To fix this, we add an attribute that is used to turn on these
   extended portions of the network device dump.  Sophisticaed
   applications like 'ip' that want to see this stuff  will be changed
   to set the attribute, whereas things like GLIBC that don't care
   about VFs simply will not, and therefore won't be busted by the
   mere presence of VFs on a network device.

   Thanks to the tireless work of Greg Rose on this fix.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (53 commits)
  sfc: Fix assignment of ip_summed for pre-allocated skbs
  ppp: fix 'ppp_mp_reconstruct bad seq' errors
  enic: Fix endianness bug.
  gre: fix spelling in comments
  netfilter: ctnetlink: fix soft lockup when netlink adds new entries (v2)
  Revert "netfilter: ctnetlink: fix soft lockup when netlink adds new entries"
  davinci_emac: Do not free all rx dma descriptors during init
  mlx4_core: Fixing array indexes when setting port types
  phy: IC+101G and PHY_HAS_INTERRUPT flag
  netdev/phy/icplus: Correct broken phy_init code
  ipsec: be careful of non existing mac headers
  Move Logitech Harmony 900 from cdc_ether to zaurus
  hso: memsetting wrong data in hso_get_count()
  netfilter: ip6_route_output() never returns NULL.
  ethernet/broadcom: ip6_route_output() never returns NULL.
  ipv6: ip6_route_output() never returns NULL.
  jme: Fix FIFO flush issue
  atm: clip: remove clip_tbl
  ipv4: ping: Fix recvmsg MSG_OOB error handling.
  rtnetlink: Fix problem with buffer allocation
  ...

8 years agomlx4_en: dont change mac_header on xmit
Eric Dumazet [Sat, 25 Feb 2012 00:51:05 +0000]
mlx4_en: dont change mac_header on xmit

A driver xmit function is not allowed to change skb without special
care.

mlx4_en_xmit() should not call skb_reset_mac_header() and instead should
use skb->data to access ethernet header.

This removes a dumb test : if (ethh && ethh->h_dest)

Also remove this slow mlx4_en_mac_to_u64() call, we can use
get_unaligned() to get faster code.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonetfilter: ctnetlink: support kernel-space dump filtering by ctmark
Pablo Neira Ayuso [Fri, 24 Feb 2012 14:41:50 +0000]
netfilter: ctnetlink: support kernel-space dump filtering by ctmark

This patch adds CTA_MARK_MASK which, together with CTA_MARK, allows
you to selectively send conntrack entries to user-space by
returning those that match mark & mask.

With this, we can save cycles in the building and the parsing of
the entries that may be later on filtered out in user-space by using
the ctmark & mask.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonetlink: allow to pass data pointer to netlink_dump_start() callback
Pablo Neira Ayuso [Fri, 24 Feb 2012 14:30:16 +0000]
netlink: allow to pass data pointer to netlink_dump_start() callback

This patch allows you to pass a data pointer that can be
accessed from the dump callback.

Netfilter is going to use this patch to provide filtered dumps
to user-space. This is specifically interesting in ctnetlink that
may handle lots of conntrack entries. We can save precious
cycles by skipping the conversion to TLV format of conntrack
entries that are not interesting for user-space.

More specifically, ctnetlink will include one operation to allow
to filter the dumping of conntrack entries by ctmark values.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonetlink: add netlink_dump_control structure for netlink_dump_start()
Pablo Neira Ayuso [Fri, 24 Feb 2012 14:30:15 +0000]
netlink: add netlink_dump_control structure for netlink_dump_start()

Davem considers that the argument list of this interface is getting
out of control. This patch tries to address this issue following
his proposal:

struct netlink_dump_control c = { .dump = dump, .done = done, ... };

netlink_dump_start(..., &c);

Suggested by David S. Miller.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoFix autofs compile without CONFIG_COMPAT
Linus Torvalds [Sun, 26 Feb 2012 17:44:55 +0000]
Fix autofs compile without CONFIG_COMPAT

The autofs compat handling fix caused a compile failure when
CONFIG_COMPAT isn't defined.

Instead of adding random #ifdef'fery in autofs, let's just make the
compat helpers earlier to use: without CONFIG_COMPAT, is_compat_task()
just hardcodes to zero.

We could probably do something similar for a number of other cases where
we have #ifdef's in code, but this is the low-hanging fruit.

Reported-and-tested-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net...
David S. Miller [Sun, 26 Feb 2012 01:28:05 +0000]
Merge branch 'master' of git://git./linux/kernel/git/jkirsher/net-next

8 years agoxfrm: remove unneeded method typedef declaration in net/xfrm.h.
Rami Rosen [Sat, 25 Feb 2012 02:09:46 +0000]
xfrm: remove unneeded method typedef declaration in net/xfrm.h.

The patch removes unneeded method typedef declaration (icv_update_fn_t
) and the two struct declarations which appear in its prototype
(struct hash_desc and struct scatterlist) in net/xfrm.h.

Signed-off-by: Rami Rosen <ramirose@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoLinux 3.3-rc5
Linus Torvalds [Sat, 25 Feb 2012 20:18:16 +0000]
Linux 3.3-rc5

8 years agoMerge tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck...
Linus Torvalds [Sat, 25 Feb 2012 20:12:08 +0000]
Merge tag 'hwmon-for-linus' of git://git./linux/kernel/git/groeck/linux-staging

Couple of minor driver fixes.

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (max34440) Fix resetting temperature history
  hwmon: (f75375s) Fix register write order when setting fans to full speed
  hwmon: (ads1015) Fix file leak in probe function
  hwmon: (max6639) Fix PPR register initialization to set both channels
  hwmon: (max6639) Fix FAN_FROM_REG calculation

8 years agoMerge branch 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Linus Torvalds [Sat, 25 Feb 2012 20:11:25 +0000]
Merge branch 'rc-fixes' of git://git./linux/kernel/git/mmarek/kbuild

three kbuild fixes for 3.3:
 - make deb-pkg symlink race fix.
 - make coccicheck fix.
 - Dropping the check for modutils.  This is not a regression, but
   allows the module-init-tools replacement kmod work with the 3.3
   kernel.

* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  coccicheck: change handling of C={1,2} when M= is set
  builddeb: Don't create files in /tmp with predictable names
  kbuild: do not check for ancient modutils tools

8 years agoautofs: work around unhappy compat problem on x86-64
Ian Kent [Wed, 22 Feb 2012 12:45:44 +0000]
autofs: work around unhappy compat problem on x86-64

When the autofs protocol version 5 packet type was added in commit
5c0a32fc2cd0 ("autofs4: add new packet type for v5 communications"), it
obvously tried quite hard to be word-size agnostic, and uses explicitly
sized fields that are all correctly aligned.

However, with the final "char name[NAME_MAX+1]" array at the end, the
actual size of the structure ends up being not very well defined:
because the struct isn't marked 'packed', doing a "sizeof()" on it will
align the size of the struct up to the biggest alignment of the members
it has.

And despite all the members being the same, the alignment of them is
different: a "__u64" has 4-byte alignment on x86-32, but native 8-byte
alignment on x86-64.  And while 'NAME_MAX+1' ends up being a nice round
number (256), the name[] array starts out a 4-byte aligned.

End result: the "packed" size of the structure is 300 bytes: 4-byte, but
not 8-byte aligned.

As a result, despite all the fields being in the same place on all
architectures, sizeof() will round up that size to 304 bytes on
architectures that have 8-byte alignment for u64.

Note that this is *not* a problem for 32-bit compat mode on POWER, since
there __u64 is 8-byte aligned even in 32-bit mode.  But on x86, 32-bit
and 64-bit alignment is different for 64-bit entities, and as a result
the structure that has exactly the same layout has different sizes.

So on x86-64, but no other architecture, we will just subtract 4 from
the size of the structure when running in a compat task.  That way we
will write the properly sized packet that user mode expects.

Not pretty.  Sadly, this very subtle, and unnecessary, size difference
has been encoded in user space that wants to read packets of *exactly*
the right size, and will refuse to touch anything else.

Reported-and-tested-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agonetfilter: bridge: fix module autoload in compat case
Florian Westphal [Wed, 22 Feb 2012 15:14:32 +0000]
netfilter: bridge: fix module autoload in compat case

We expected 0 if module doesn't exist, which is no longer the case
(42046e2e45c109ba703993c510401a11f716c8df,
netfilter: x_tables: return -ENOENT for non-existant matches/targets).

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

8 years agoe1000e: rename e1000e_reload_nvm() and call as function pointer
Bruce Allan [Wed, 22 Feb 2012 09:03:14 +0000]
e1000e: rename e1000e_reload_nvm() and call as function pointer

Rename e1000e_reload_nvm() to e1000e_reload_nvm_generic() to signify the
function is used for more than one MAC-family type, and set and use it as a
MAC ops function pointer to be consistent with the driver design.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

8 years agoe1000e: cleanup - remove unnecessary variable
Bruce Allan [Wed, 22 Feb 2012 09:03:09 +0000]
e1000e: cleanup - remove unnecessary variable

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

8 years agoe1000e: use true/false for boolean send_xon, do not assume always true
Bruce Allan [Wed, 22 Feb 2012 09:03:03 +0000]
e1000e: use true/false for boolean send_xon, do not assume always true

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

8 years agoe1000e: cleanup comment in e1000_hash_mc_addr()
Bruce Allan [Wed, 22 Feb 2012 09:02:53 +0000]
e1000e: cleanup comment in e1000_hash_mc_addr()

Remove reference to non-existant function.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

8 years agoe1000e: rename e1000e_config_collision_dist() and call as function pointer
Bruce Allan [Wed, 22 Feb 2012 09:02:58 +0000]
e1000e: rename e1000e_config_collision_dist() and call as function pointer

Rename e1000e_config_collision_dist() to
e1000e_config_collision_dist_generic() to signify the function is used for
more than one MAC-family type, and set and use it as a MAC ops function
pointer to be consistent with the driver design.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

8 years agoe1000e: comment correction in e1000e_set_kmrn_lock_loss_workaround_ich8lan
Bruce Allan [Wed, 22 Feb 2012 09:02:47 +0000]
e1000e: comment correction in e1000e_set_kmrn_lock_loss_workaround_ich8lan

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

8 years agoe1000e: cleanup calls to setup_physical_interface function pointer
Bruce Allan [Wed, 22 Feb 2012 09:02:42 +0000]
e1000e: cleanup calls to setup_physical_interface function pointer

Call the MAC ops setup_physical_interface function pointer instead of the
MAC-family-specific function to conform to the rest of the driver design.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

8 years agoe1000e: cleanup use of check_reset_block function pointer
Bruce Allan [Wed, 22 Feb 2012 09:02:37 +0000]
e1000e: cleanup use of check_reset_block function pointer

Replace e1000_check_reset_block() inline function with calls to the PHY ops
check_reset_block function pointer.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

8 years agoe1000e: cleanup use of check_mng_mode function pointer
Bruce Allan [Wed, 22 Feb 2012 09:02:32 +0000]
e1000e: cleanup use of check_mng_mode function pointer

Replace e1000_check_mng_mode() inline function with calls to the MAC ops
check_mng_mode function pointer.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

8 years agoe1000e: cleanup: rename e1000e_setup_link() and call as function pointer
Bruce Allan [Wed, 22 Feb 2012 09:02:26 +0000]
e1000e: cleanup: rename e1000e_setup_link() and call as function pointer

Rename e1000e_setup_link() to e1000e_setup_link_generic() to signify the
function is used for more than one MAC-family type.  The 82571-family has
a custom setup_link function which also calls the generic function.  The
ich8lan-family has a custom function which should just be called via the
function pointer.  The 80003es2lan-family just uses the generic function.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

8 years agoe1000e: cleanup: rename e1000e_id_led_init() and call as function pointer
Bruce Allan [Wed, 22 Feb 2012 09:02:21 +0000]
e1000e: cleanup: rename e1000e_id_led_init() and call as function pointer

Rename e1000e_id_led_init() to e1000e_id_led_init_generic() to signify the
function is used for more than one MAC-family type.  For the ich8lan MAC
family, some MACs use the generic function and others use the function
e1000_id_led_init_pchlan().  In all cases where e1000e_id_led_init() was
called directly, change to call the function pointer to be consistent with
the driver design.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

8 years agoMerge tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland...
Linus Torvalds [Sat, 25 Feb 2012 04:03:14 +0000]
Merge tag 'rdma-for-linus' of git://git./linux/kernel/git/roland/infiniband

One InfiniBand/RDMA regression fix for 3.3:

 - mlx4 SR-IOV changes added static exported functions, which doesn't
   build on powerpc at least.  Fix from Doug Ledford for this.

* tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  mlx4_core: Exported functions can't be static

8 years agoMerge branch 'sfc-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/bwh/sfc
David S. Miller [Sat, 25 Feb 2012 03:12:44 +0000]
Merge branch 'sfc-3.3' of git://git./linux/kernel/git/bwh/sfc

8 years agosfc: Fix assignment of ip_summed for pre-allocated skbs
Ben Hutchings [Sat, 25 Feb 2012 00:03:10 +0000]
sfc: Fix assignment of ip_summed for pre-allocated skbs

When pre-allocating skbs for received packets, we set ip_summed =
CHECKSUM_UNNCESSARY.  We used to change it back to CHECKSUM_NONE when
the received packet had an incorrect checksum or unhandled protocol.

Commit bc8acf2c8c3e43fcc192762a9f964b3e9a17748b ('drivers/net: avoid
some skb->ip_summed initializations') mistakenly replaced the latter
assignment with a DEBUG-only assertion that ip_summed ==
CHECKSUM_NONE.  This assertion is always false, but it seems no-one
has exercised this code path in a DEBUG build.

Fix this by moving our assignment of CHECKSUM_UNNECESSARY into
efx_rx_packet_gro().

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>

8 years agoMerge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi...
Linus Torvalds [Sat, 25 Feb 2012 00:08:51 +0000]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi-rc-fixes-2.6

SCSI fixes on 20120224:
 "This is a set of assorted bug fixes for power management, mpt2sas,
  ipr, the rdac device handler and quite a big chunk for qla2xxx (plus a
  use after free of scsi_host in scsi_scan.c). "

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6:
  [SCSI] scsi_dh_rdac: Fix for unbalanced reference count
  [SCSI] scsi_pm: Fix bug in the SCSI power management handler
  [SCSI] scsi_scan: Fix 'Poison overwritten' warning caused by using freed 'shost'
  [SCSI] qla2xxx: Update version number to 8.03.07.13-k.
  [SCSI] qla2xxx: Proper detection of firmware abort error code for ISP82xx.
  [SCSI] qla2xxx: Remove resetting memory during device initialization for ISP82xx.
  [SCSI] qla2xxx: Complete mailbox command timedout to avoid initialization failures during next reset cycle.
  [SCSI] qla2xxx: Remove check for null fcport from host reset handler.
  [SCSI] qla2xxx: Correct out of bounds read of ISP2200 mailbox registers.
  [SCSI] qla2xxx: Remove errant clearing of MBX_INTERRUPT flag during CT-IOCB processing.
  [SCSI] qla2xxx: Clear options-flags while issuing stop-firmware mbx command.
  [SCSI] qla2xxx: Add an "is reset active" helper.
  [SCSI] qla2xxx: Add check for null fcport references in qla2xxx_queuecommand.
  [SCSI] qla2xxx: Propagate up abort failures.
  [SCSI] isci: Fix NULL ptr dereference when no firmware is being loaded
  [SCSI] ipr: fix eeh recovery for 64-bit adapters
  [SCSI] mpt2sas: Fix mismatch in mpt2sas_base_hard_reset_handler() mutex lock-unlock

8 years agoppp: fix 'ppp_mp_reconstruct bad seq' errors
Ben McKeegan [Fri, 24 Feb 2012 06:33:56 +0000]
ppp: fix 'ppp_mp_reconstruct bad seq' errors

This patch fixes a (mostly cosmetic) bug introduced by the patch
'ppp: Use SKB queue abstraction interfaces in fragment processing'
found here: http://www.spinics.net/lists/netdev/msg153312.html

The above patch rewrote and moved the code responsible for cleaning
up discarded fragments but the new code does not catch every case
where this is necessary.  This results in some discarded fragments
remaining in the queue, and triggering a 'bad seq' error on the
subsequent call to ppp_mp_reconstruct.  Fragments are discarded
whenever other fragments of the same frame have been lost.
This can generate a lot of unwanted and misleading log messages.

This patch also adds additional detail to the debug logging to
make it clearer which fragments were lost and which other fragments
were discarded as a result of losses. (Run pppd with 'kdebug 1'
option to enable debug logging.)

Signed-off-by: Ben McKeegan <ben@netservers.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoenic: Fix endianness bug.
Santosh Nayak [Fri, 24 Feb 2012 06:56:39 +0000]
enic: Fix endianness bug.

Sparse complaints the endian bug.

Signed-off-by: Santosh Nayak <santoshprasadnayak@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agococcicheck: change handling of C={1,2} when M= is set
Greg Dietsche [Fri, 20 Jan 2012 23:10:35 +0000]
coccicheck: change handling of C={1,2} when M= is set

This patch reverts a portion of d0bc1fb4 so that coccicheck will
work properly when C=1 or C=2.

Reported-and-tested-by: Brice Goglin <Brice.Goglin@inria.fr>
Signed-off-by: Greg Dietsche <Gregory.Dietsche@cuw.edu>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Michal Marek <mmarek@suse.cz>

8 years agoMerge branch 'master' of git://1984.lsi.us.es/net
David S. Miller [Fri, 24 Feb 2012 22:41:57 +0000]
Merge branch 'master' of git://1984.lsi.us.es/net

8 years agogre: fix spelling in comments
stephen hemminger [Fri, 24 Feb 2012 08:08:20 +0000]
gre: fix spelling in comments

The original spelling and bad word choice makes these comments hard to read.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agotipc: Eliminate support for tipc_mode global variable
Allan Stephens [Tue, 8 Nov 2011 18:48:28 +0000]
tipc: Eliminate support for tipc_mode global variable

Removes all references to the global variable that records whether
TIPC is running in "single node" mode or "network" mode, since this
information can be easily deduced from the global variable that
records TIPC's network address. (i.e. a non-zero network address
means that TIPC is running in network mode.)

The changes made update most existing mode-based checks to use the
network address global variable. A few checks that are no longer
needed are removed entirely, along with any associated code lying on
non-executable control paths.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

8 years agotipc: Eliminate obsolete support for "not running" mode
Allan Stephens [Tue, 8 Nov 2011 18:18:59 +0000]
tipc: Eliminate obsolete support for "not running" mode

Removes all references to TIPC's "not running" mode, since the
removal of support for the native API means that there is no longer
any way to interact with TIPC if it has not been initialized.

The changes made consist of removing mode-based checks that are no
longer needed, along with any associated code lying on non-executable
control paths.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

8 years agotipc: Revert name table translation optimization
Allan Stephens [Mon, 7 Nov 2011 22:00:54 +0000]
tipc: Revert name table translation optimization

Restores name table translation using a non-zero domain that is
"out of scope", which was broken by an earlier commit
(5d9c54c1e9ececcf7e99c4f014f9bec7ee3a7def). Comments have now been
added to the name table translation routine to make it clear that
there are actually three possible outcomes to a translation request
(found/not found/deferred), rather than just two (found/not found).

Note that a straightforward revert of the earlier commit is not
possible, as other changes to the name table translation logic
have occurred since the incorrect optimization was made.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

8 years agotipc: Minor optimization to broadcast link synchronization logic
Allan Stephens [Fri, 4 Nov 2011 19:00:02 +0000]
tipc: Minor optimization to broadcast link synchronization logic

Optimizes processing done when contact with a neighboring node is
established to avoid recording the current state of outgoing broadcast
messages if the neighboring node isn't a valid broadcast link destination,
since this state information isn't needed for such nodes.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

8 years agotipc: Remove obsolete comments about routing table updates
Allan Stephens [Fri, 4 Nov 2011 18:54:06 +0000]
tipc: Remove obsolete comments about routing table updates

Eliminates a block of comments that describe how routing table updates
are to be handled. These comments no longer apply following the removal
of TIPC's prototype multi-cluster support.

Note that these changes are essentially cosmetic in nature, and have
no impact on the actual operation of TIPC.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

8 years agotipc: Eliminate trivial buffer manipulation helper routines
Allan Stephens [Fri, 4 Nov 2011 17:24:29 +0000]
tipc: Eliminate trivial buffer manipulation helper routines

Gets rid of two inlined routines that simply call existing sk_buff
manipulation routines, since there is no longer any extra processing
done by the helper routines.

Note that these changes are essentially cosmetic in nature, and have
no impact on the actual operation of TIPC.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

8 years agotipc: Hide internal details of node table implementation
Allan Stephens [Fri, 4 Nov 2011 15:54:43 +0000]
tipc: Hide internal details of node table implementation

Relocates information about the size of TIPC's node table index and
its associated hash function, since only node subsystem routines need
to have access to this information.

Note that these changes are essentially cosmetic in nature, and have
no impact on the actual operation of TIPC.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

8 years agotipc: Eliminate a test for negative unsigned quantities
Allan Stephens [Thu, 3 Nov 2011 17:15:10 +0000]
tipc: Eliminate a test for negative unsigned quantities

Simplifies a comparison operation to eliminate a useless test that
checks if an unsigned value is less than zero.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

8 years agotipc: nuke the delimit static inline function.
Paul Gortmaker [Thu, 23 Feb 2012 20:44:08 +0000]
tipc: nuke the delimit static inline function.

This "shortform" is actually longer than typing out what it is really
trying to do, and just makes reading the code more difficult, so
lets simply shoot it in the head.

In the case of log.c - the comparison is on a u32, so we can drop the
check for < 0 at the same time.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

8 years agotipc: Add check to prevent insertion of duplicate name table entries
Allan Stephens [Thu, 3 Nov 2011 15:12:01 +0000]
tipc: Add check to prevent insertion of duplicate name table entries

Adds a new check to TIPC's name table logic to reject any attempt to
create a new name publication that is identical to an existing one.
(Such an attempt will never happen under normal circumstances, but
could arise if another network node malfunctions and issues a duplicate
name publication message.)

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

8 years agotipc: Simplify enforcement of reserved name type prohibition
Allan Stephens [Wed, 2 Nov 2011 19:49:40 +0000]
tipc: Simplify enforcement of reserved name type prohibition

Streamlines the logic that prevents an application from binding a
reserved TIPC name type to a port by moving the check to the code
that handles a socket bind() operation. This allows internal TIPC
subsystems to bind a reserved name without having to set an atomic
flag to gain permission to use such a name. (This simplification is
now possible due to the elimination of support for TIPC's native API.)

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

8 years agotipc: Remove duplicate check of message destination node
Allan Stephens [Wed, 2 Nov 2011 19:08:44 +0000]
tipc: Remove duplicate check of message destination node

Eliminates a check in the processing of TIPC messages arriving from
off node that ensures the message is destined for this node, since this
check duplicates an earlier check. (The check would be necessary if TIPC
needed to be able to route incoming messages to another node, but the
elimination of multi-cluster support means that this never happens and
all incoming messages are consumed by the receiving node.)

Note: This change involves the elimination of a single "if" statement
with a large "then" clause; consequently, a significant number of lines
end up getting re-indented. In addition, a simple message header access
routine that is no longer referenced is eliminated. However, the only
functional change is the elimination of the single check described above.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

8 years agotipc: Detect duplicate nodes using different network interfaces
Allan Stephens [Fri, 28 Oct 2011 21:30:08 +0000]
tipc: Detect duplicate nodes using different network interfaces

Utilizes the new "node signature" field in neighbor discovery messages
to ensure that all links TIPC associates with a given <Z.C.N> network
address belong to the same neighboring node. (Previously, TIPC could not
tell if link setup requests arriving on different interfaces were from
the same node or from two different nodes that has mistakenly been assigned
the same network address.)

The revised algorithm for detecting a duplicate node considers both the
node signature and the network interface adddress specified in a request
message when deciding how to respond to a link setup request. This prevents
false alarms that might otherwise arise during normal network operation
under the following scenarios:

a) A neighboring node reboots. (The node's signature changes, but the
network interface address remains unchanged.)

b) A neighboring node's network interface is replaced. (The node's signature
remains unchanged, but the network interface address changes.)

c) A neighboring node is completely replaced. (The node's signature and
network interface address both change.)

The algorithm also handles cases in which a node reboots and re-establishes
its links to TIPC (or begins re-establishing those links) before TIPC
detects that it is using a new node signature. In such cases of "delayed
rediscovery" TIPC simply accepts the new signature without disrupting
communication that is already underway over the links.

Thanks to Laser [gotolaser@gmail.com] for his contributions to the
development of this enhancement.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

8 years agotipc: Introduce node signature field in neighbor discovery message
Allan Stephens [Fri, 28 Oct 2011 20:26:41 +0000]
tipc: Introduce node signature field in neighbor discovery message

Adds support for the new "node signature" in neighbor discovery messages,
which is a 16 bit identifier chosen randomly when TIPC is initialized.
This field makes it possible for nodes receiving a neighbor discovery
message to detect if multiple neighboring nodes are using the same network
address (i.e. <Z.C.N>), even when the messages are arriving on different
interfaces.

This first phase of node signature support creates the signature,
incorporates it into outgoing neighbor discovery messages, and tracks
the signature used by valid neighbors. An upcoming patch builds on this
foundation to implement the improved duplicate neighbor detection checking.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

8 years agoStaging: wlags49_h2: print MAC via printk format specifier
Danny Kukawka [Fri, 24 Feb 2012 13:46:02 +0000]
Staging: wlags49_h2: print MAC via printk format specifier

Print MAC/dev_addr via printk extended format specifier %pM
instead of custom code.

Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de>

8 years agoStaging: ft1000-pcmcia: print MAC via printk format specifier
Danny Kukawka [Fri, 24 Feb 2012 13:46:01 +0000]
Staging: ft1000-pcmcia: print MAC via printk format specifier

Print MAC/dev_addr via printk extended format specifier %pM
instead of custom code.

Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de>

8 years agoarch/ia64/hp/sim/simeth.c: print MAC via printk format specifier
Danny Kukawka [Fri, 24 Feb 2012 13:45:52 +0000]
arch/ia64/hp/sim/simeth.c: print MAC via printk format specifier

Print MAC/dev_addr via printk extended format specifier %pm
instead of custom code.

Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de>

8 years agousb/kaweth: print MAC via printk format specifier
Danny Kukawka [Fri, 24 Feb 2012 03:46:00 +0000]
usb/kaweth: print MAC via printk format specifier

Print MAC/dev_addr via printk extended format specifier %pM
instead of custom code.

Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de>
Acked-by: Oliver Neukum <oliver@neukum.name>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agousb/cdc_ncm: print MAC via printk format specifier
Danny Kukawka [Fri, 24 Feb 2012 03:45:59 +0000]
usb/cdc_ncm: print MAC via printk format specifier

Print MAC/dev_addr via printk extended format specifier %pM
instead of custom code.

Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoxscale/ixp2000/ixpdev: print MAC via printk format specifier
Danny Kukawka [Fri, 24 Feb 2012 03:45:58 +0000]
xscale/ixp2000/ixpdev: print MAC via printk format specifier

Print MAC/dev_addr via printk extended format specifier %pM
instead of custom code.

Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de>
Acked-by: Lennert Buytenhek <kernel@wantstofly.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agosun/sunqe: print MAC via printk format specifier
Danny Kukawka [Fri, 24 Feb 2012 03:45:57 +0000]
sun/sunqe: print MAC via printk format specifier

Print MAC/dev_addr via printk extended format specifier %pM
instead of custom code.

Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoixgbevf: print MAC via printk format specifier
Danny Kukawka [Fri, 24 Feb 2012 03:45:56 +0000]
ixgbevf: print MAC via printk format specifier

Print MAC/dev_addr via printk extended format specifier %pM
instead of custom code.

Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agodec/tulip/de4x5: print MAC via printk format specifier
Danny Kukawka [Fri, 24 Feb 2012 03:45:55 +0000]
dec/tulip/de4x5: print MAC via printk format specifier

Print MAC/dev_addr via printk extended format specifier %pM
instead of custom code.

Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agocirrus/mac89x0: print MAC via printk format specifier
Danny Kukawka [Fri, 24 Feb 2012 03:45:54 +0000]
cirrus/mac89x0: print MAC via printk format specifier

Print MAC/dev_addr via printk extended format specifier %pM instead
of custom code.

Use memcpy to set the address to dev->dev_addr in set_mac_address,
instead of mxing it up in a for loop with printing a debug msg.

Check also if the given address is valid.

Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de>
Signed-off-by: David S. Miller <davem@davemloft.net>