15 years ago[JFFS2] Fix node lookup
Artem B. Bityuckiy [Thu, 17 Feb 2005 17:51:17 +0000]
[JFFS2] Fix node lookup

Look the ref->next_phys field instead of ->next_in_ino to determine
if the block has more then one node.

Signed-off-by: Artem B. Bityuckiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

15 years ago[MTD] NAND: Fix bad block table scan for small page devices
Artem B. Bityuckiy [Wed, 16 Feb 2005 17:09:39 +0000]
[MTD] NAND: Fix bad block table scan for small page devices

Scan 1st and 2nd pages of SP devices for BB marker by default.
Fix more then one page scanning in create_bbt.c.

Signed-off-by: Artem B. Bityuckiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

15 years ago[MTD] Quiet unused variable warning
Nicolas Pitre [Wed, 16 Feb 2005 15:55:03 +0000]
[MTD] Quiet unused variable warning

Signed-off-by: Nioclas Pitre <nico@cam.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

15 years ago[MTD] NAND: Early Manufacturer ID lookup
Kyungmin Park [Wed, 16 Feb 2005 09:39:39 +0000]
[MTD] NAND: Early Manufacturer ID lookup

Move manufacturer ID search to display correct ID in case of buswidth
mismatch.

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

15 years ago[MTD] Add SST 39VF1601 (MPF+) ID
Ben Dooks [Mon, 14 Feb 2005 16:30:35 +0000]
[MTD] Add SST 39VF1601 (MPF+) ID

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

15 years ago[MTD] Fixup probing logic for single 16bit devices
Ben Dooks [Mon, 14 Feb 2005 16:27:38 +0000]
[MTD] Fixup probing logic for single 16bit devices

The change to the generic probe to look for the
smallest width of chip first is causing some problems
on boards with a single 16bit device.

The problem seems to be the jedec_match() is truncating
the device-id read from the table to match against the
one read from the hardware, causing a match against the
partial id of some chips with 16bit IDs (such as the
SST39LF160)

This fixes things for my own board, but something may
need to be done if the same problem is exhibited for
chips with an 8bit ID

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

15 years ago[MTD] NAND: Read only OOB bytes during bad block scan
Artem B. Bityuckiy [Fri, 11 Feb 2005 10:14:15 +0000]
[MTD] NAND: Read only OOB bytes during bad block scan

When scanning NAND for bad blocks, don't read the whole page, read
only needed OOB bytes instead. Also check the return code of the
nand_read_raw() function. Correctly free the this->bbt array in
case of failure. Tested with Large page NAND.

Fix debugging message.

Signed-off-by: Artem B. Bityuckiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

15 years ago[MTD] NAND: Allow operation without bad block table
Artem B. Bityuckiy [Wed, 9 Feb 2005 14:50:00 +0000]
[MTD] NAND: Allow operation without bad block table

Small bugfix. Sometimes it may be handy not to have bbt.
So, this->bbt might be NULL.

Signed-off-by: Artem B. Bityuckiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

15 years ago[MTD] NAND: Skip bad block table scan on request
Thomas Gleixner [Wed, 9 Feb 2005 12:20:00 +0000]
[MTD] NAND: Skip bad block table scan on request

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

15 years ago[JFFS2] Use a single config option for write buffer support
Andrew Victor [Wed, 9 Feb 2005 09:24:26 +0000]
[JFFS2] Use a single config option for write buffer support

This patch replaces the current CONFIG_JFFS2_FS_NAND, CONFIG_JFFS2_FS_NOR_ECC
and CONFIG_JFFS2_FS_DATAFLASH with a single configuration option -
CONFIG_JFFS2_FS_WRITEBUFFER.

The only functional change of this patch is that the slower div/mod
calculations for SECTOR_ADDR(), PAGE_DIV() and PAGE_MOD() are now always
used when CONFIG_JFFS2_FS_WRITEBUFFER is enabled.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

15 years ago[JFFS2] Add support for JFFS2-on-Dataflash devices.
Andrew Victor [Wed, 9 Feb 2005 09:17:45 +0000]
[JFFS2] Add support for JFFS2-on-Dataflash devices.

For Dataflash, can_mark_obsolete = false and the NAND write buffering
code (wbuf.c) is used.

Since the DataFlash chip will automatically erase pages when writing,
the cleanmarkers are not needed - so cleanmarker_oob = false and
cleanmarker_size = 0

DataFlash page-sizes are not a power of two (they're multiples of 528
bytes).  The SECTOR_ADDR macro (added in the previous core patch) is
replaced with a (slower) div/mod version if CONFIG_JFFS2_FS_DATAFLASH is
selected.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

15 years ago[JFFS2] Core changes required to support JFFS2-on-Dataflash devices.
Andrew Victor [Wed, 9 Feb 2005 09:09:05 +0000]
[JFFS2] Core changes required to support JFFS2-on-Dataflash devices.

DataFlash page-sizes are not a power of two (they're multiples of 528
bytes).  There are a few places in JFFS2 code where sector_size is used
as a bitmask.  A new macro (SECTOR_ADDR) was defined to calculate these
sector addresses. For non-DataFlash devices, the original (faster)
bitmask operation is still used.

In scan.c, the EMPTY_SCAN_SIZE was a constant of 1024.
Since this could be larger than the sector size of the DataFlash, this
is now basically set to MIN(sector_size, 1024).

Addition of a jffs2_is_writebuffered() macro.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

15 years ago[MTD] Unabuse file-f_mode for OTP purpose
Nicolas Pitre [Tue, 8 Feb 2005 19:12:53 +0000]
[MTD] Unabuse file-f_mode for OTP purpose

Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

15 years ago[MTD] User interface to Protection Registers
Nicolas Pitre [Tue, 8 Feb 2005 17:45:55 +0000]
[MTD] User interface to Protection Registers

This is implemented using a ioctl to switch the MTD char device into
one of the different OTP "modes", at which point read/write/seek can
operate on the selected OTP area.  Also some extra ioctls to query
for size and lock protection segments or groups.  Some example user
space utilities are provided.

Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

15 years ago[MTD] Support for protection register support on Intel FLASH chips
Nicolas Pitre [Tue, 8 Feb 2005 17:11:19 +0000]
[MTD] Support for protection register support on Intel FLASH chips

This enables support for reading, writing and locking so called
"Protection Registers" present on some flash chips.
A subset of them are pre-programmed at the factory with a
unique set of values. The rest is user-programmable.

Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

15 years ago[JFFS2] Prevent deadlock during write buffer recovery
Estelle Hammache [Sat, 5 Feb 2005 18:23:40 +0000]
[JFFS2] Prevent deadlock during write buffer recovery

Prevent deadlock when checking erased block for
space allocation during wbuf recovery.

Signed-off-by: Estelle Hammache <estelle.hammache@st.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

15 years ago[MTD] Add OTP basisc
Nicolas Pitre [Sat, 5 Feb 2005 02:06:19 +0000]
[MTD] Add OTP basisc

add structure definition for OTP region info

Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

15 years ago[MTD] amd_flash: Fix chip ID clash
Jonas Holmberg [Fri, 4 Feb 2005 07:43:13 +0000]
[MTD] amd_flash: Fix chip ID clash

* Removed table entry for AM29BDS643D, since device ID clashes with AM29DL640G
and both chips support CFI.

Signed-off-by: Jonas Holmberg <jonas.holmberg@axis.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

15 years ago[JFFS2] Remove NAND dependencies for NOR FLASH
David Woodhouse [Wed, 2 Feb 2005 22:12:08 +0000]
[JFFS2] Remove NAND dependencies for NOR FLASH

make NAND code work on NOR flash again

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

15 years ago[MTD] DiskOnChip: big endian fix for NFTL devices
Thomas Gleixner [Mon, 31 Jan 2005 22:22:24 +0000]
[MTD] DiskOnChip: big endian fix for NFTL devices

Make NFTL devices work on big endian machines.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

15 years ago[MTD] DiskOnChip code cleanup
Thomas Gleixner [Mon, 31 Jan 2005 22:21:18 +0000]
[MTD] DiskOnChip code cleanup

Remove commented ugliness

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

15 years ago[MTD] DiskOnChip use CONFIG_ options instead of random symbols
Thomas Gleixner [Mon, 31 Jan 2005 20:36:46 +0000]
[MTD] DiskOnChip use CONFIG_ options instead of random symbols

Using the CONFIG_ options from KConfig seems to work better :8

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

15 years ago[JFFS2] Code cleanup
Estelle Hammache [Fri, 28 Jan 2005 18:53:05 +0000]
[JFFS2] Code cleanup

Code beautification and block filing correction for optimization.

Signed-off-by: Estelle Hammache <estelle.hammache@st.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

15 years ago[MTD] Fix MTD device probing
Russell King [Mon, 24 Jan 2005 23:49:54 +0000]
[MTD] Fix MTD device probing

Try larger numbers of chips before smaller
numbers of chips across the bus width.

This means we'll avoid misdetecting a 2 x16 array as 1 x32 if the
high 16-bits happen to read as zeros in the QRY area.

Signed-off-by: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

15 years ago[JFFS2] Fix refile of blocks due to write failure.
Estelle Hammache [Mon, 24 Jan 2005 21:30:25 +0000]
[JFFS2] Fix refile of blocks due to write failure.

avoid segfault when nextblock was refiled because of a write failure
- avoid filing blocks on the clean list when they have wasted
space

Signed-off-by: Estelle Hammache <estelle.hammache@st.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

15 years ago[JFFS2] Fix block refiling
Estelle Hammache [Mon, 24 Jan 2005 21:24:18 +0000]
[JFFS2] Fix block refiling

- block refiling when writing directly to flash a buffer
which is bigger than wbuf
- retry cases for flushing wbuf

Signed-off-by: Estelle Hammache <estelle.hammache@st.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

15 years ago[JFFS2] Fix write buffer retry case
Estelle Hammache [Mon, 24 Jan 2005 21:13:42 +0000]
[JFFS2] Fix write buffer retry case

Correction of retry case to avoid silent failure of rmdir
when jffs2_wbuf_recover GCs the previous entry (+ corresponding
dnode case).

Signed-off-by: Estelle Hammache <estelle.hammache@st.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

15 years ago[MTD] rtc_from4 error status check, disable virtual erase blocks
David A. Marlin [Mon, 24 Jan 2005 20:40:15 +0000]
[MTD] rtc_from4 error status check, disable virtual erase blocks

Added routine to perform extra error status checks on erase and write
failures to determine if errors are correctable.
Added option to prevent JFFS2 from using virtual erase blocks.
Performed minor cleanup on whitespace and comments.

Signed-off-by: David A. Marlin <dmarlin@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

15 years ago[MTD] NAND Add optional ECC status check callback
David A. Marlin [Mon, 24 Jan 2005 03:07:46 +0000]
[MTD] NAND Add optional ECC status check callback

Add optional hardware specific callback routine to perform extra error
status checks on erase and write failures for devices with hardware ECC.

Signed-off-by: David A. Marlin <dmarlin@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

15 years ago[MTD] Platform RAM Driver
Ben Dooks [Mon, 24 Jan 2005 00:37:04 +0000]
[MTD] Platform RAM Driver

Driver for generic RAM blocks which are exported by an platform_device
from the device driver system.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

15 years ago[MTD] NAND use symbols instead of literals
David A. Marlin [Sun, 23 Jan 2005 18:30:53 +0000]
[MTD] NAND use symbols instead of literals

Replace some literals with defined symbols.

Signed-off-by: David A. Marlin <dmarlin@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

15 years ago[MTD] NAND SharpSL fix default partition size
Richard Purdie [Sun, 23 Jan 2005 11:09:22 +0000]
[MTD] NAND SharpSL fix default partition size

Correct Poodle default partition size

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

15 years ago[JFFS2] Avoid warning for empty filesystems
Todd Poynor [Wed, 19 Jan 2005 19:22:04 +0000]
[JFFS2] Avoid warning for empty filesystems

Avoid "Eep. No valid nodes for ino #1" message for just-created filesystem.

Signed-off-by: Todd Poynor <tpoynor@mvista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

15 years ago[MTD] NAND replace yield
Thomas Gleixner [Tue, 18 Jan 2005 16:15:00 +0000]
[MTD] NAND replace yield

Replace yield by msleep. M.Wilcox stared at it and frowned

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

15 years ago[MTD] bast-flash partitions fixup
Ben Dooks [Tue, 18 Jan 2005 11:13:50 +0000]
[MTD] bast-flash partitions fixup

Ensure the whole device is added if there are no partitions found on the
device, so that at least the flash can be read/written.

Replace some of the constants with their SZ_xxx counterparts

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

15 years ago[MTD] Renesas AG-AND device recovery
David A. Marlin [Mon, 17 Jan 2005 19:44:39 +0000]
[MTD] Renesas AG-AND device recovery

Add routine to perform device recovery (deplete) procedure.
Clean up some compiler warnings.

Signed-off-by: David A. Marlin <dmarlin@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

15 years ago[MTD] NAND workaround for AG-AND disturb issue. AG-AND recovery
David A. Marlin [Mon, 17 Jan 2005 18:35:25 +0000]
[MTD] NAND workaround for AG-AND disturb issue. AG-AND recovery

Added workaround for Renesas AG-AND chips "disturb" issue
for Bad Block Table.
Added support for the device recovery command sequence
for Renesas AG-AND chips.

Signed-off-by: David A. Marlin <dmarlin@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

15 years ago[MTD] NAND extended commands, badb block table autorefresh
David A. Marlin [Mon, 17 Jan 2005 18:29:21 +0000]
[MTD] NAND extended commands, badb block table autorefresh

Added extended commands for AG-AND device and added
option for BBT_AUTO_REFRESH.

Signed-off-by: David A. Marlin <dmarlin@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

15 years ago[MTD] FTL Fix missing pointer assignment
Herbert Valerio Riedel [Mon, 17 Jan 2005 13:47:24 +0000]
[MTD] FTL Fix missing pointer assignment

For the case that mtd partitions are enabled it would cause a 0-pointer
dereferencing in mtdpart.c:mtd_erase_callback()

Signed-off-by: Herbert Valerio Riedel <hvr@inso.tuwien.ac.at>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

15 years ago[MTD] slram driver cleanup
Josh Boyer [Thu, 6 Jan 2005 21:16:45 +0000]
[MTD] slram driver cleanup

Add error checks to read/write functions and add an eraseblock size.
Makes slram a suitable device for JFFS2.

Signed-off-by: Josh Boyer <jdub@us.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

15 years ago[PATCH] prevent NULL mmap in topdown model
Linus Torvalds [Wed, 18 May 2005 22:39:33 +0000]
[PATCH] prevent NULL mmap in topdown model

Prevent the topdown allocator from allocating mmap areas all the way
down to address zero.

We still allow a MAP_FIXED mapping of page 0 (needed for various things,
ranging from Wine and DOSEMU to people who want to allow speculative
loads off a NULL pointer).

Tested by Chris Wright.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years agoAutomatic merge of rsync://rsync.kernel.org/pub/scm/linux/kernel/git/gregkh/driver...
Linus Torvalds [Wed, 18 May 2005 23:37:46 +0000]
Merge ... /linux/kernel/git/gregkh/driver-2.6.git/

15 years ago[PATCH] Avoid console spam with ext3 aborted journal.
Stephen Tweedie [Wed, 18 May 2005 15:47:17 +0000]
[PATCH] Avoid console spam with ext3 aborted journal.

Avoid console spam with ext3 aborted journal.

ext3 usually reports error conditions that it detects in its environment.
But when its journal gets aborted due to such errors, it can sometimes
continue to report that condition forever, spamming the console to such
an extent that the initial first cause of the journal abort can be lost.

When the journal aborts, we put the filesystem into readonly mode.  Most
subsequent filesystem operations will get rejected immediately by checks
for MS_RDONLY either in the filesystem or in the VFS.  But some paths do
not have such checks --- for example, if we continue to write to a file
handle that was opened before the fs went readonly.  (We only check for
the ROFS condition when the file is first opened.)  In these cases, we
can continue to generate log errors similar to

EXT3-fs error (device $DEV) in start_transaction: Journal has aborted

for each subsequent write.

There is really no point in generating these errors after the initial
error has been fully reported.  Specifically, if we're starting a
completely new filesystem operation, and the filesystem is *already*
readonly (ie. the ext3 layer has already detected and handled the
underlying jbd abort), and we see an EROFS error, then there is simply
no point in reporting it again.

Signed-off-by: Stephen Tweedie <sct@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] Fix filp being passed through raw ioctl handler
Stephen Tweedie [Wed, 18 May 2005 15:22:31 +0000]
[PATCH] Fix filp being passed through raw ioctl handler

Don't pass meaningless file handles to block device ioctls.

The recent raw IO ioctl-passthrough fix started passing the raw file
handle into the block device ioctl handler.  That's unlikely to be
useful, as the file handle is actually open on a character-mode raw
device, not a block device, so dereferencing it is not going to yield
useful results to a block device ioctl handler.

Previously we just passed NULL; also not a value that can usefully
be dereferenced, but at least if it does happen, we'll oops instead of
silently pretending that the file is a block device, so NULL is the more
defensive option here.  This patch reverts to that behaviour.

Noticed by Al Viro.

Signed-off-by: Stephen Tweedie <sct@redhat.com>
Acked-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] Driver Core: remove driver model detach_state
David Brownell [Thu, 12 May 2005 19:06:27 +0000]
[PATCH] Driver Core: remove driver model detach_state

The driver model has a "detach_state" mechanism that:

 - Has never been used by any in-kernel drive;
 - Is superfluous, since driver remove() methods can do the same thing;
 - Became buggy when the suspend() parameter changed semantics and type;
 - Could self-deadlock when called from certain suspend contexts;
 - Is effectively wasted documentation, object code, and headspace.

This removes that "detach_state" mechanism; net code shrink, as well
as a per-device saving in the driver model and sysfs.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

15 years ago[PATCH] Driver Core: pm diagnostics update, check for errors
David Brownell [Mon, 9 May 2005 15:07:00 +0000]
[PATCH] Driver Core: pm diagnostics update, check for errors

This patch includes various tweaks in the messaging that appears during
system pm state transitions:

  * Warn about certain illegal calls in the device tree, like resuming
    child before parent or suspending parent before child.  This could
    happen easily enough through sysfs, or in some cases when drivers
    use device_pm_set_parent().

  * Be more consistent about dev_dbg() tracing ... do it for resume() and
    shutdown() too, and never if the driver doesn't have that method.

  * Say which type of system sleep state is being entered.

Except for the warnings, these only affect debug messaging.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

15 years ago[PATCH] PCI: add MODALIAS to hotplug event for pci devices
Greg KH [Thu, 5 May 2005 18:57:25 +0000]
[PATCH] PCI: add MODALIAS to hotplug event for pci devices

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

15 years ago[PATCH] PCI: add modalias sysfs file for pci devices
Greg KH [Thu, 5 May 2005 18:57:25 +0000]
[PATCH] PCI: add modalias sysfs file for pci devices

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

15 years ago[PATCH] PCI Hotplug: remove pci_visit_dev
Scott Murray [Mon, 9 May 2005 21:36:27 +0000]
[PATCH] PCI Hotplug: remove pci_visit_dev

If my CPCI hotplug update patch is applied, then there are no longer any
in tree users of the pci_visit_dev API, and it and its related code can be
removed.

Signed-off-by: Scott Murray <scottm@somanetworks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

15 years ago[PATCH] PCI Hotplug: CPCI update
Scott Murray [Mon, 9 May 2005 21:31:50 +0000]
[PATCH] PCI Hotplug: CPCI update

[PATCH] CPCI: update

I have finally done some work to update the CompactPCI hotplug driver to
fix some of the outstanding issues in 2.6:
- Added adapter and latch status ops so that those files will get created
  by the current PCI hotplug core.  This used to not be required, but
  seems to be now after some of the sysfs rework in the core.
- Replaced slot list spinlock with a r/w semaphore to avoid any potential
  issues with sleeping.  This quiets all of the runtime warnings.
- Reworked interrupt driven hot extraction handling to remove need for a
  polling operator for ENUM# status.  There are a lot of boards that only
  have an interrupt driven by ENUM#, so this lowers the bar to entry.
- Replaced pci_visit_dev usage with better use of the PCI core functions.
  The new code is functionally equivalent to the previous code, but the
  use of pci_enable_device on insert needs to be investigated further, as
  I need to do some more testing to see if it is still necessary.

Signed-off-by: Scott Murray <scottm@somanetworks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

15 years ago[PATCH] PCI Hotplug: get pciehp to work on the downstream port of a switch
Dely Sy [Sat, 7 May 2005 00:19:09 +0000]
[PATCH] PCI Hotplug: get pciehp to work on the downstream port of a switch

Here is the updated patch to get pciehp driver to work for downstream
port of a switch and handle the difference in the offset value of PCI
Express capability list item of different ports.

Signed-off-by: Dely Sy <dely.l.sy@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

15 years ago[PATCH] PCI Hotplug: Fix echoing 1 to power file of enabled slot problem with SHPC...
Dely Sy [Thu, 5 May 2005 18:57:25 +0000]
[PATCH] PCI Hotplug: Fix echoing 1 to power file of enabled slot problem with SHPC driver

Here is a patch to fix the problem of echoing 1 to "power" file
to enabled slot causing the slot to power down, and echoing 0
to disabled slot causing shpchp_disabled_slot() to be called
twice. This problem was reported by kenji Kaneshige.

Thanks,
Dely

Signed-off-by: Dely Sy <dely.l.sy@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

15 years ago[PATCH] fix memory scribble in arch/i386/pci/fixup.c
Christoph Lameter [Tue, 17 May 2005 15:48:16 +0000]
[PATCH] fix memory scribble in arch/i386/pci/fixup.c

The GET_INDEX() macro should use just the low three bits of the devfn,
otherwise we have a memory scribble in pcie_rootport_aspm_quirk that
overwrites ptype_all

Fix it to be more careful about its arguments while at it.

Acked by Dely Sy <dely.l.sy@intel.com>

Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] update CREDITS
randy_dunlap [Tue, 17 May 2005 14:12:56 +0000]
[PATCH] update CREDITS

free agent

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] ppc32: enable use of early_param
Paul Mackerras [Tue, 17 May 2005 06:48:39 +0000]
[PATCH] ppc32: enable use of early_param

We need to call parse_early_param() early on to allow usage of
early_param() for command line parsing.

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years agoAutomatic merge of rsync://rsync.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata...
Linus Torvalds [Tue, 17 May 2005 15:55:00 +0000]
Merge ... /linux/kernel/git/jgarzik/libata-2.6.git

15 years agoMerge of rsync://rsync.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev.git
<jgarzik@pretzel.yyz.us> [Tue, 17 May 2005 15:30:39 +0000]
Merge ... /linux/kernel/git/jgarzik/libata-dev.git

15 years agoAutomatic merge of rsync://rsync.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2...
Linus Torvalds [Tue, 17 May 2005 15:11:04 +0000]
Merge ... /linux/kernel/git/gregkh/usb-2.6.git/

15 years ago[PATCH] dvb: budget-av: CI fixes
Johannes Stezenbach [Tue, 17 May 2005 04:54:49 +0000]
[PATCH] dvb: budget-av: CI fixes

- remove enable_ci, ci interface is assumed to be present if the saa7113
  is not found.
- reduce the delay when checking for saa7113
- clean up the cam reset according to specifications
- turn off Vcc to the cam slot if cam is removed or fails reset
- remove cam reset in ciintf_init
- clean up printks (KERN_)
- move gpio setting into saa7113_init
- clean up unreadable frontend_init
(Kenneth Aafloy)

Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] dvb: bt8xx: whitespace cleanup
Johannes Stezenbach [Tue, 17 May 2005 04:54:49 +0000]
[PATCH] dvb: bt8xx: whitespace cleanup

whitespace cleanup

Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] dvb: DST: fixed CI debug output
Johannes Stezenbach [Tue, 17 May 2005 04:54:47 +0000]
[PATCH] dvb: DST: fixed CI debug output

fixed CI debug output (Dominique Dumont)

Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] dvb: DST: fix a bug in the module parameter
Johannes Stezenbach [Tue, 17 May 2005 04:54:47 +0000]
[PATCH] dvb: DST: fix a bug in the module parameter

fix a bug in the module parameter (Dominique Dumont)

Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] dvb: bt8xx: updated documentation
Johannes Stezenbach [Tue, 17 May 2005 04:54:45 +0000]
[PATCH] dvb: bt8xx: updated documentation

updated documentation (Manu Abraham)

Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] dvb: DST: misc. fixes
Johannes Stezenbach [Tue, 17 May 2005 04:54:45 +0000]
[PATCH] dvb: DST: misc. fixes

removed unused module parameter session removed unnecesary delay for FTA cards
(Manu Abraham)

Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] dvb: DST: fix for descrambling failure
Johannes Stezenbach [Tue, 17 May 2005 04:54:44 +0000]
[PATCH] dvb: DST: fix for descrambling failure

fix for descrambling failure (Dominique Dumont, Manu Abraham)

Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] dvb: DST: fixed tuning problem
Johannes Stezenbach [Tue, 17 May 2005 04:54:43 +0000]
[PATCH] dvb: DST: fixed tuning problem

fixed a tuning problem for cards based on the old firmware (Steffen Motzer,
Manu Abraham)

Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] dvb: DST: add support for Twinhan 200103A
Johannes Stezenbach [Tue, 17 May 2005 04:54:42 +0000]
[PATCH] dvb: DST: add support for Twinhan 200103A

add support for the old Twinhan 200103A card (Steffen Motzer)

Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] dvb: DST: reorganize Twinhan DST driver to support CI
Johannes Stezenbach [Tue, 17 May 2005 04:54:41 +0000]
[PATCH] dvb: DST: reorganize Twinhan DST driver to support CI

- reorganize Twinhan DST driver to support CI
- add support for more cards
(Manu Abraham)

Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] dvb: bt8xx: update documentation
Johannes Stezenbach [Tue, 17 May 2005 04:54:40 +0000]
[PATCH] dvb: bt8xx: update documentation

update bt8xx documentation (Uwe Bugla)

Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] dvb: modified dvb_register_adapter() to avoid kmalloc/kfree
Johannes Stezenbach [Tue, 17 May 2005 04:54:39 +0000]
[PATCH] dvb: modified dvb_register_adapter() to avoid kmalloc/kfree

Modified dvb_register_adapter() to avoid kmalloc/kfree.  Drivers have to embed
struct dvb_adapter into their private data struct from now on.  (Andreas
Oberritter)

Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] dvb: frontends: misc. minor cleanups
Johannes Stezenbach [Tue, 17 May 2005 04:54:38 +0000]
[PATCH] dvb: frontends: misc. minor cleanups

misc. minor cleanups, select FW_LOADER and add a help text to DVB_OR51132

Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] dvb: make needlessly global code static or drop it
Johannes Stezenbach [Tue, 17 May 2005 04:54:38 +0000]
[PATCH] dvb: make needlessly global code static or drop it

- make needlessly global code static
- #if 0 the following unused global functions:
  - ttpci/av7110_hw.c: av7110_reset_arm
  - ttpci/av7110_hw.c: av7110_send_ci_cmd
- frontends/mt352.[ch]: drop mt352_read

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] dvb: dvb-pll.h: prevent multiple inclusion
Johannes Stezenbach [Tue, 17 May 2005 04:54:37 +0000]
[PATCH] dvb: dvb-pll.h: prevent multiple inclusion

added missing #ifndef and #define to inhibit multiple inclusions (Patrick
Boettcher)

Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] dvb: tda10046: support for different firmware versions
Johannes Stezenbach [Tue, 17 May 2005 04:54:36 +0000]
[PATCH] dvb: tda10046: support for different firmware versions

added support for different tda10046 firmware versions.  tested with v20, v21
and v25.  (Andreas Oberritter)

Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] dvb: tda1004x: allow N_I2C to be overridden by the card driver
Johannes Stezenbach [Tue, 17 May 2005 04:54:35 +0000]
[PATCH] dvb: tda1004x: allow N_I2C to be overridden by the card driver

allow N_I2C to be overridden by the card driver (Andreas Oberritter)

Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] dvb: tda1004x: dont use bitfields
Johannes Stezenbach [Tue, 17 May 2005 04:54:35 +0000]
[PATCH] dvb: tda1004x: dont use bitfields

use simple u8 instead of bitfields (Andreas Oberritter)

Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] dvb: mt352: embed struct mt352_config in mt352_state
Johannes Stezenbach [Tue, 17 May 2005 04:54:34 +0000]
[PATCH] dvb: mt352: embed struct mt352_config in mt352_state

copying the mt352_config-struct to mt352_state instead of storing just the
pointer to it (Patrick Boettcher)

Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] dvb: ves1820: remove unnecessary msleep
Johannes Stezenbach [Tue, 17 May 2005 04:54:33 +0000]
[PATCH] dvb: ves1820: remove unnecessary msleep

remove unnecessary msleep(10) in writereg (Tony Glader)

Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] dvb: dib3000: add NULL pointer check
Johannes Stezenbach [Tue, 17 May 2005 04:54:32 +0000]
[PATCH] dvb: dib3000: add NULL pointer check

prevent NULL pointer related Oopses (Patrick Boettcher)

Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] dvb: remove unnecessary casts in frontends
Johannes Stezenbach [Tue, 17 May 2005 04:54:31 +0000]
[PATCH] dvb: remove unnecessary casts in frontends

remove unnecessary casts in frontends (Kenneth Aafloy)

Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] dvb: stv0299: fix FE_DISHNETWORK_SEND_LEGACY_CMD
Johannes Stezenbach [Tue, 17 May 2005 04:54:31 +0000]
[PATCH] dvb: stv0299: fix FE_DISHNETWORK_SEND_LEGACY_CMD

fix the current stv0299 code that handles FE_DISHNETWORK_SEND_LEGACY_CMD.
(supports the legacy SW21, SW44, and SW64 switches)

Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] dvb: tda1004x: formatting cleanups
Johannes Stezenbach [Tue, 17 May 2005 04:54:30 +0000]
[PATCH] dvb: tda1004x: formatting cleanups

mostly formatting cleanups, no functional change (Andreas Oberritter)

Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] dvb: nxt6000: support frontend status reads
Johannes Stezenbach [Tue, 17 May 2005 04:54:29 +0000]
[PATCH] dvb: nxt6000: support frontend status reads

add support for read_ber, read_signal_strength and read_status (Greg Wickham)

Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] dvb: av7110: fix indentation
Johannes Stezenbach [Tue, 17 May 2005 04:54:28 +0000]
[PATCH] dvb: av7110: fix indentation

fix indentation

Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] dvb: av7110: fix comment
Johannes Stezenbach [Tue, 17 May 2005 04:54:28 +0000]
[PATCH] dvb: av7110: fix comment

fixed debugging instructions: av7110_debug -> debug (Oliver Endirss)

Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] dvb: av7110: fix NTSC/PAL switching
Johannes Stezenbach [Tue, 17 May 2005 04:54:27 +0000]
[PATCH] dvb: av7110: fix NTSC/PAL switching

fix NTSC -> PAL switching (std->id is a bitmap!) (Oliver Endriss)

Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] dvb: av7110: fix VIDEO_SET_DISPLAY_FORMAT
Johannes Stezenbach [Tue, 17 May 2005 04:54:26 +0000]
[PATCH] dvb: av7110: fix VIDEO_SET_DISPLAY_FORMAT

VIDEO_SET_DISPLAY_FORMAT ioctl fixed:
set videostate.display_format, not videostate.video_format (Oliver Endriss)

Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] dvb: dvb_net: handle IPv6 and LLC/SNAP
Johannes Stezenbach [Tue, 17 May 2005 04:54:25 +0000]
[PATCH] dvb: dvb_net: handle IPv6 and LLC/SNAP

handle IPv6 and LLC/SNAP (Bertrand Mazieres, Matthieu Castet, Johannes
Stezenbach)

Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] dvb: remove unnecessary casts in dvb-core
Johannes Stezenbach [Tue, 17 May 2005 04:54:24 +0000]
[PATCH] dvb: remove unnecessary casts in dvb-core

remove unnecessary casts in dvb-core (Kenneth Aafloy)

Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] dvb: add support for KNC-1 cards
Johannes Stezenbach [Tue, 17 May 2005 04:54:23 +0000]
[PATCH] dvb: add support for KNC-1 cards

Support KNC-1 Plus DVB-T and similar KNC-1 cards (Alexander Riedel)

Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] dvb: av7110: audio out fix
Johannes Stezenbach [Tue, 17 May 2005 04:54:22 +0000]
[PATCH] dvb: av7110: audio out fix

Switch analog output of the Crystal sound chip to left/stereo/right mode.
This will fix problems with some (most?) channels which do not encode
2-channel audio correctly.  (Oliver Endriss)

Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] dvb: dvb_frontend: fix module param
Johannes Stezenbach [Tue, 17 May 2005 04:54:21 +0000]
[PATCH] dvb: dvb_frontend: fix module param

Remove incorrect "dvb_"-prefix from parameter description.  Error detected
with section2text.rb, see autoparam patch.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] dvb: saa7146: no need to initialize static/global variables to 0
Johannes Stezenbach [Tue, 17 May 2005 04:54:20 +0000]
[PATCH] dvb: saa7146: no need to initialize static/global variables to 0

no need to initialize static/global variables to 0

Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] dvb: support for TT/Hauppauge Nexus-S Rev 2.3
Johannes Stezenbach [Tue, 17 May 2005 04:54:19 +0000]
[PATCH] dvb: support for TT/Hauppauge Nexus-S Rev 2.3

Support for TT/Hauppauge Nexus-S Rev 2.3 (Oliver Endriss)

Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] dvb: flexcop: DiSeqC fix
Johannes Stezenbach [Tue, 17 May 2005 04:54:19 +0000]
[PATCH] dvb: flexcop: DiSeqC fix

Fixed DiSeqC switching, which was wrongly taking over from skystar2.c.  Thanks
to Joerg Riechardt for finding the bug and testing the Fix.

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] dvb: flexcop: i2c read fixes
Johannes Stezenbach [Tue, 17 May 2005 04:54:18 +0000]
[PATCH] dvb: flexcop: i2c read fixes

rewrote the i2c-reading-part (no more ack-error ignoring, which was inherited
from the skystar2-driver)

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] dvb: flexcop: readme update
Johannes Stezenbach [Tue, 17 May 2005 04:54:17 +0000]
[PATCH] dvb: flexcop: readme update

readme update

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] dvb: flexcop: fix module refcount handling
Johannes Stezenbach [Tue, 17 May 2005 04:54:16 +0000]
[PATCH] dvb: flexcop: fix module refcount handling

Corrected the THIS_MODULE handling for the flexcop-stuff and dvb-usb which
lead to oopses because of misorganized module dependencies.

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] dvb: flexcop: use hw pid filter
Johannes Stezenbach [Tue, 17 May 2005 04:54:15 +0000]
[PATCH] dvb: flexcop: use hw pid filter

- enabled the HW PID by default for the PCI cards

- correct the TS demux parsing when PID filter is enabled (and thus the
  timer IRQ)

- rewrote the PID-filter and FULLTS control part in flexcop-hw-filter
  (thanks to Krzysztof Matula for pointing that out)

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] dvb: flexcop: fixed interrupt-sharing
Johannes Stezenbach [Tue, 17 May 2005 04:54:15 +0000]
[PATCH] dvb: flexcop: fixed interrupt-sharing

fixed interrupt-sharing and added a spinlock to the irq-callback
(thanks to Pascal Riekenberg)

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>