9 years agoMerge branch 'kmemleak' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas...
Linus Torvalds [Mon, 19 Jul 2010 20:18:34 +0000]
Merge branch 'kmemleak' of git://git./linux/kernel/git/cmarinas/linux-2.6-cm

* 'kmemleak' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-2.6-cm:
  kmemleak: Add support for NO_BOOTMEM configurations
  kmemleak: Annotate false positive in init_section_page_cgroup()

9 years agoMerge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6
Linus Torvalds [Mon, 19 Jul 2010 20:18:05 +0000]
Merge branch 'for-linus' of git://git390.marist.edu/linux-2.6

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
  [S390] cio: fix potential overflow in chpid descriptor
  [S390] add missing device put
  [S390] dasd: use correct label location for diag fba disks

9 years agointel_scu_ipc: Oops/crash fixes
Sreedhara DS [Mon, 19 Jul 2010 08:37:42 +0000]
intel_scu_ipc: Oops/crash fixes

- fix reversing of command/sub arguments
- fix a crash if the i2c interface is called before the device is found

Signed-off-by: Sreedhara DS <sreedhara.ds@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoBtrfs: fix CLONE ioctl destination file size expansion to block boundary
Sage Weil [Sat, 12 Jun 2010 22:31:14 +0000]
Btrfs: fix CLONE ioctl destination file size expansion to block boundary

The CLONE and CLONE_RANGE ioctls round up the range of extents being
cloned to the block size when the range to clone extends to the end of file
(this is always the case with CLONE).  It was then using that offset when
extending the destination file's i_size.  Fix this by not setting i_size
beyond the originally requested ending offset.

This bug was introduced by a22285a6 (2.6.35-rc1).

Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

9 years agoBtrfs: fix split_leaf double split corner case
Chris Mason [Wed, 7 Jul 2010 14:51:48 +0000]
Btrfs: fix split_leaf double split corner case

split_leaf was not properly balancing leaves when it was forced to
split a leaf twice.  This commit adds an extra push left and right
before forcing the double split in hopes of getting the slot where
we want to insert at either the start or end of the leaf.

If the extra pushes do work, then we are able to avoid splitting twice
and we keep the tree properly balanced.

Signed-off-by: Chris Mason <chris.mason@oracle.com>

9 years agotcp: fix crash in tcp_xmit_retransmit_queue
Ilpo Järvinen [Mon, 19 Jul 2010 01:16:18 +0000]
tcp: fix crash in tcp_xmit_retransmit_queue

It can happen that there are no packets in queue while calling
tcp_xmit_retransmit_queue(). tcp_write_queue_head() then returns
NULL and that gets deref'ed to get sacked into a local var.

There is no work to do if no packets are outstanding so we just
exit early.

This oops was introduced by 08ebd1721ab8fd (tcp: remove tp->lost_out
guard to make joining diff nicer).

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Reported-by: Lennart Schulte <lennart.schulte@nets.rwth-aachen.de>
Tested-by: Lennart Schulte <lennart.schulte@nets.rwth-aachen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirel...
David S. Miller [Mon, 19 Jul 2010 19:38:51 +0000]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless-2.6

9 years agokmemleak: Add support for NO_BOOTMEM configurations
Catalin Marinas [Mon, 19 Jul 2010 10:54:15 +0000]
kmemleak: Add support for NO_BOOTMEM configurations

With commits 08677214 and 59be5a8e, alloc_bootmem()/free_bootmem() and
friends use the early_res functions for memory management when
NO_BOOTMEM is enabled. This patch adds the kmemleak calls in the
corresponding code paths for bootmem allocations.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Yinghai Lu <yinghai@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: stable@kernel.org

9 years agokmemleak: Annotate false positive in init_section_page_cgroup()
Catalin Marinas [Mon, 19 Jul 2010 10:54:14 +0000]
kmemleak: Annotate false positive in init_section_page_cgroup()

The pointer to the page_cgroup table allocated in
init_section_page_cgroup() is stored in section->page_cgroup as (base -
pfn). Since this value does not point to the beginning or inside the
allocated memory block, kmemleak reports a false positive.

This was reported in bugzilla.kernel.org as #16297.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Adrien Dessemond <adrien.dessemond@gmail.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Andrew Morton <akpm@linux-foundation.org>

9 years ago[S390] cio: fix potential overflow in chpid descriptor
Sebastian Ott [Mon, 19 Jul 2010 07:22:37 +0000]
[S390] cio: fix potential overflow in chpid descriptor

The length filed in the chsc response block (if valid)
has a value of n*(sizeof(chp_desc))+8 (for the response
block header). When we memcopied from the response block
to the actual descriptor we copied 8 bytes too much.
The bug was not revealed since the descriptor is embedded
in struct channel_path.
Since we only write one descriptor at a time ignore the
length value and use sizeof(*desc).

Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

9 years ago[S390] add missing device put
Stefan Haberland [Mon, 19 Jul 2010 07:22:36 +0000]
[S390] add missing device put

The dasd_alias_show function does not return a device reference
in case the device is an alias.

Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

9 years ago[S390] dasd: use correct label location for diag fba disks
Peter Oberparleiter [Mon, 19 Jul 2010 07:22:35 +0000]
[S390] dasd: use correct label location for diag fba disks

Partition boundary calculation fails for DASD FBA disks under the
following conditions:
- disk is formatted with CMS FORMAT with a blocksize of more than
  512 bytes
- all of the disk is reserved to a single CMS file using CMS RESERVE
- the disk is accessed using the DIAG mode of the DASD driver

Under these circumstances, the partition detection code tries to
read the CMS label block containing partition-relevant information
from logical block offset 1, while it is in fact located at physical
block offset 1.

Fix this problem by using the correct CMS label block location
depending on the device type as determined by the DASD SENSE ID
information.

Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

9 years agocrypto: talitos - fix bug in sg_copy_end_to_buffer
Lee Nipper [Mon, 19 Jul 2010 06:11:24 +0000]
crypto: talitos - fix bug in sg_copy_end_to_buffer

In function sg_copy_end_to_buffer, too much data
is copied when a segment in the scatterlist
has .length greater than the requested copy length.

This patch adds the limit checks to fix this bug of over copying,
which affected only the ahash algorithms.

Signed-off-by: Lee Nipper <lee.nipper@gmail.com>
Acked-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

9 years agomm: add context argument to shrinker callback
Dave Chinner [Mon, 19 Jul 2010 04:56:17 +0000]
mm: add context argument to shrinker callback

The current shrinker implementation requires the registered callback
to have global state to work from. This makes it difficult to shrink
caches that are not global (e.g. per-filesystem caches). Pass the shrinker
structure to the callback so that users can embed the shrinker structure
in the context the shrinker needs to operate on and get back to it in the
callback via container_of().

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>

9 years agoMerge branch 'x86/kprobes' of git://git.kernel.org/pub/scm/linux/kernel/git/frob...
Linus Torvalds [Sun, 18 Jul 2010 22:13:30 +0000]
Merge branch 'x86/kprobes' of git://git./linux/kernel/git/frob/linux-2.6-roland

* 'x86/kprobes' of git://git.kernel.org/pub/scm/linux/kernel/git/frob/linux-2.6-roland:
  x86: kprobes: fix swapped segment registers in kretprobe

9 years agox86: kprobes: fix swapped segment registers in kretprobe
Roland McGrath [Sat, 17 Jul 2010 01:17:12 +0000]
x86: kprobes: fix swapped segment registers in kretprobe

In commit f007ea26, the order of the %es and %ds segment registers
got accidentally swapped, so synthesized 'struct pt_regs' frames
have the two values inverted.  It's almost sure that these values
never matter, and that they also never differ.  But wrong is wrong.

Signed-off-by: Roland McGrath <roland@redhat.com>

9 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes...
Linus Torvalds [Sun, 18 Jul 2010 22:05:22 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/jbarnes/pci-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  PCI: fall back to original BIOS BAR addresses

9 years agoIPv6: fix CoA check in RH2 input handler (mip6_rthdr_input())
Arnaud Ebalard [Fri, 16 Jul 2010 00:38:44 +0000]
IPv6: fix CoA check in RH2 input handler (mip6_rthdr_input())

The input handler for Type 2 Routing Header (mip6_rthdr_input())
checks if the CoA in the packet matches the CoA in the XFRM state.

Current check is buggy: it compares the adddress in the Type 2
Routing Header, i.e. the HoA, against the expected CoA in the state.
The comparison should be made against the address in the destination
field of the IPv6 header.

The bug remained unnoticed because the main (and possibly only current)
user of the code (UMIP MIPv6 Daemon) initializes the XFRM state with the
unspecified address, i.e. explicitly allows everything.

Yoshifuji-san, can you ack that one?

Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoMerge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec...
Linus Torvalds [Sun, 18 Jul 2010 17:09:25 +0000]
Merge branch 'upstream-linus' of git://git./linux/kernel/git/jlbec/ocfs2

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2:
  ocfs2: Silence gcc warning in ocfs2_write_zero_page().
  jbd2/ocfs2: Fix block checksumming when a buffer is used in several transactions
  ocfs2/dlm: Remove BUG_ON from migration in the rare case of a down node
  ocfs2: Don't duplicate pages past i_size during CoW.
  ocfs2: tighten up strlen() checking
  ocfs2: Make xattr reflink work with new local alloc reservation.
  ocfs2: make xattr extension work with new local alloc reservation.
  ocfs2: Remove the redundant cpu_to_le64.
  ocfs2/dlm: don't access beyond bitmap size
  ocfs2: No need to zero pages past i_size.
  ocfs2: Zero the tail cluster when extending past i_size.
  ocfs2: When zero extending, do it by page.
  ocfs2: Limit default local alloc size within bitmap range.
  ocfs2: Move orphan scan work to ocfs2_wq.
  fs/ocfs2/dlm: Add missing spin_unlock

9 years agodrm/i915: add 'reclaimable' to i915 self-reclaimable page allocations
Linus Torvalds [Sun, 18 Jul 2010 16:44:37 +0000]
drm/i915: add 'reclaimable' to i915 self-reclaimable page allocations

The hibernate issues that got fixed in commit 985b823b9192 ("drm/i915:
fix hibernation since i915 self-reclaim fixes") turn out to have been
incomplete.  Vefa Bicakci tested lots of hibernate cycles, and without
the __GFP_RECLAIMABLE flag the system eventually fails to resume.

With the flag added, Vefa can apparently hibernate forever (or until he
gets bored running his automated scripts, whichever comes first).

The reclaimable flag was there originally, and was one of the flags that
were dropped (unintentionally) by commit 4bdadb978569 ("drm/i915:
Selectively enable self-reclaim") that introduced all these problems,
but I didn't want to just blindly add back all the flags in commit
985b823b9192, and it looked like __GFP_RECLAIM wasn't necessary.  It
clearly was.

I still suspect that there is some subtle reason we're missing that
causes the problems, but __GFP_RECLAIMABLE is certainly not wrong to use
in this context, and is what the code historically used.  And we have no
idea what the causes the corruption without it.

Reported-and-tested-by: M. Vefa Bicakci <bicave@superonline.com>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoInput: qt2160 - rename kconfig symbol name
Christoph Fritz [Sat, 17 Jul 2010 21:29:06 +0000]
Input: qt2160 - rename kconfig symbol name

drivers/input/keyboard/Kconfig defines QT2160 while the corresponding
Makefile expects CONFIG_KEYBOARD_QT2160 as all other keyboard drivers
do. To keep this Makefile consistent rename the config-token from
CONFIG_QT2160 to CONFIG_KEYBOARD_QT2160.

The various defconfig files are left alone.

Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

9 years agoASoC: Remove duplicate AUX definition from WM8776
Mark Brown [Sat, 17 Jul 2010 13:20:17 +0000]
ASoC: Remove duplicate AUX definition from WM8776

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Cc: stable@kernel.org

9 years agox86, pci, mrst: Add extra sanity check in walking the PCI extended cap chain
Jacob Pan [Fri, 16 Jul 2010 18:58:26 +0000]
x86, pci, mrst: Add extra sanity check in walking the PCI extended cap chain

The fixed bar capability structure is searched in PCI extended
configuration space.  We need to make sure there is a valid capability
ID to begin with otherwise, the search code may stuck in a infinite
loop which results in boot hang.  This patch adds additional check for
cap ID 0, which is also invalid, and indicates end of chain.

End of chain is supposed to have all fields zero, but that doesn't
seem to always be the case in the field.

Suggested-by: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
LKML-Reference: <1279306706-27087-1-git-send-email-jacob.jun.pan@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>

9 years agox86: Fix x2apic preenabled system with kexec
Yinghai Lu [Thu, 15 Jul 2010 07:00:59 +0000]
x86: Fix x2apic preenabled system with kexec

Found one x2apic system kexec loop test failed
when CONFIG_NMI_WATCHDOG=y (old) or CONFIG_LOCKUP_DETECTOR=y (current tip)

first kernel can kexec second kernel, but second kernel can not kexec third one.

it can be duplicated on another system with BIOS preenabled x2apic.
First kernel can not kexec second kernel.

It turns out, when kernel boot with pre-enabled x2apic, it will not execute
disable_local_APIC on shutdown path.

when init_apic_mappings() is called in setup_arch, it will skip setting of
apic_phys when x2apic_mode is set. ( x2apic_mode is much early check_x2apic())
Then later, disable_local_APIC() will bail out early because !apic_phys.

So check !x2apic_mode in x2apic_mode in disable_local_APIC with !apic_phys.

another solution could be updating init_apic_mappings() to set apic_phys even
for preenabled x2apic system. Actually even for x2apic system, that lapic
address is mapped already in early stage.

BTW: is there any x2apic preenabled system with apicid of boot cpu > 255?

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <4C3EB22B.3000701@kernel.org>
Acked-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: stable@kernel.org
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>

9 years agoocfs2: Silence gcc warning in ocfs2_write_zero_page().
Joel Becker [Fri, 16 Jul 2010 20:32:33 +0000]
ocfs2: Silence gcc warning in ocfs2_write_zero_page().

ocfs2_write_zero_page() has a loop that won't ever be skipped, but gcc
doesn't know that.  Set ret=0 just to make gcc happy.

Signed-off-by: Joel Becker <joel.becker@oracle.com>

9 years agoibmveth: lost IRQ while closing/opening device leads to service loss
Robert Jennings [Fri, 16 Jul 2010 04:57:25 +0000]
ibmveth: lost IRQ while closing/opening device leads to service loss

The order of freeing the IRQ and freeing the device in firmware
in ibmveth_close can cause the adapter to become unusable after a
subsequent ibmveth_open.  Only a reboot of the OS will make the
network device usable again. This is seen when cycling the adapter
up and down while there is network activity.

There is a window where an IRQ will be left unserviced (H_EOI will not
be called).  The solution is to make a VIO_IRQ_DISABLE h_call, free the
device with firmware, and then call free_irq.

Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoMerge branch 'vhost-net' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
David S. Miller [Fri, 16 Jul 2010 19:41:44 +0000]
Merge branch 'vhost-net' of git://git./linux/kernel/git/mst/vhost

9 years agoPCI: fall back to original BIOS BAR addresses
Bjorn Helgaas [Thu, 15 Jul 2010 15:41:42 +0000]
PCI: fall back to original BIOS BAR addresses

If we fail to assign resources to a PCI BAR, this patch makes us try the
original address from BIOS rather than leaving it disabled.

Linux tries to make sure all PCI device BARs are inside the upstream
PCI host bridge or P2P bridge apertures, reassigning BARs if necessary.
Windows does similar reassignment.

Before this patch, if we could not move a BAR into an aperture, we left
the resource unassigned, i.e., at address zero.  Windows leaves such BARs
at the original BIOS addresses, and this patch makes Linux do the same.

This is a bit ugly because we disable the resource long before we try to
reassign it, so we have to keep track of the BIOS BAR address somewhere.
For lack of a better place, I put it in the struct pci_dev.

I think it would be cleaner to attempt the assignment immediately when the
claim fails, so we could easily remember the original address.  But we
currently claim motherboard resources in the middle, after attempting to
claim PCI resources and before assigning new PCI resources, and changing
that is a fairly big job.

Addresses https://bugzilla.kernel.org/show_bug.cgi?id=16263

Reported-by: Andrew <nitr0@seti.kr.ua>
Tested-by: Andrew <nitr0@seti.kr.ua>
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

9 years agoMerge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 16 Jul 2010 18:26:33 +0000]
Merge branch 'perf-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  tracing: Add alignment to syscall metadata declarations
  perf: Sync callchains with period based hits
  perf: Resurrect flat callchains
  perf: Version String fix, for fallback if not from git
  perf: Version String fix, using kernel version

9 years agort2x00: Fix lockdep warning in rt2x00lib_probe_dev()
Stephen Boyd [Fri, 16 Jul 2010 16:50:10 +0000]
rt2x00: Fix lockdep warning in rt2x00lib_probe_dev()

The rt2x00dev->intf_work workqueue is never initialized when a driver is
probed for a non-existent device (in this case rt2500usb). On such a
path we call rt2x00lib_remove_dev() to free any resources initialized
during the probe before we use INIT_WORK to initialize the workqueue.
This causes lockdep to get confused since the lock used in the workqueue
hasn't been initialized yet but is now being acquired during
cancel_work_sync() called by rt2x00lib_remove_dev().

Fix this by initializing the workqueue first before we attempt to probe
the device. This should make lockdep happy and avoid breaking any
assumptions about how the library cleans up after a probe fails.

phy0 -> rt2x00lib_probe_dev: Error - Failed to allocate device.
INFO: trying to register non-static key.
the code is fine but needs lockdep annotation.
turning off the locking correctness validator.
Pid: 2027, comm: modprobe Not tainted 2.6.35-rc5+ #60
Call Trace:
 [<ffffffff8105fe59>] register_lock_class+0x152/0x31f
 [<ffffffff81344a00>] ? usb_control_msg+0xd5/0x111
 [<ffffffff81061bde>] __lock_acquire+0xce/0xcf4
 [<ffffffff8105f6fd>] ? trace_hardirqs_off+0xd/0xf
 [<ffffffff81492aef>] ?  _raw_spin_unlock_irqrestore+0x33/0x41
 [<ffffffff810628d5>] lock_acquire+0xd1/0xf7
 [<ffffffff8104f037>] ? __cancel_work_timer+0x99/0x17e
 [<ffffffff8104f06e>] __cancel_work_timer+0xd0/0x17e
 [<ffffffff8104f037>] ? __cancel_work_timer+0x99/0x17e
 [<ffffffff8104f136>] cancel_work_sync+0xb/0xd
 [<ffffffffa0096675>] rt2x00lib_remove_dev+0x25/0xb0 [rt2x00lib]
 [<ffffffffa0096bf7>] rt2x00lib_probe_dev+0x380/0x3ed [rt2x00lib]
 [<ffffffff811d78a7>] ? __raw_spin_lock_init+0x31/0x52
 [<ffffffffa00bbd2c>] ? T.676+0xe/0x10 [rt2x00usb]
 [<ffffffffa00bbe4f>] rt2x00usb_probe+0x121/0x15e [rt2x00usb]
 [<ffffffff813468bd>] usb_probe_interface+0x151/0x19e
 [<ffffffff812ea08e>] driver_probe_device+0xa7/0x136
 [<ffffffff812ea167>] __driver_attach+0x4a/0x66
 [<ffffffff812ea11d>] ? __driver_attach+0x0/0x66
 [<ffffffff812e96ca>] bus_for_each_dev+0x54/0x89
 [<ffffffff812e9efd>] driver_attach+0x19/0x1b
 [<ffffffff812e9b64>] bus_add_driver+0xb4/0x204
 [<ffffffff812ea41b>] driver_register+0x98/0x109
 [<ffffffff813465dd>] usb_register_driver+0xb2/0x173
 [<ffffffffa00ca000>] ? rt2500usb_init+0x0/0x20 [rt2500usb]
 [<ffffffffa00ca01e>] rt2500usb_init+0x1e/0x20 [rt2500usb]
 [<ffffffff81000203>] do_one_initcall+0x6d/0x17a
 [<ffffffff8106cae8>] sys_init_module+0x9c/0x1e0
 [<ffffffff8100296b>] system_call_fastpath+0x16/0x1b

Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

9 years agoceph: do not include cap/dentry releases in replayed messages
Sage Weil [Thu, 15 Jul 2010 21:58:39 +0000]
ceph: do not include cap/dentry releases in replayed messages

Strip the cap and dentry releases from replayed messages.  They can
cause the shared state to get out of sync because they were generated
(with the request message) earlier, and no longer reflect the current
client state.

Signed-off-by: Sage Weil <sage@newdream.net>

9 years agoceph: reuse request message when replaying against recovering mds
Sage Weil [Thu, 15 Jul 2010 20:24:32 +0000]
ceph: reuse request message when replaying against recovering mds

Replayed rename operations (after an mds failure/recovery) were broken
because the request paths were regenerated from the dentry names, which
get mangled when d_move() is called.

Instead, resend the previous request message when replaying completed
operations.  Just make sure the REPLAY flag is set and the target ino is
filled in.

This fixes problems with workloads doing renames when the MDS restarts,
where the rename operation appears to succeed, but on mds restart then
fails (leading to client confusion, app breakage, etc.).

Signed-off-by: Sage Weil <sage@newdream.net>

9 years agoperf symbols: Fix directory descriptor leaking
Gui Jianfeng [Thu, 24 Jun 2010 07:04:02 +0000]
perf symbols: Fix directory descriptor leaking

When I ran "perf kvm ... top", I encountered the following error output.

  Error: perfcounter syscall returned with -1 (Too many open files)

  Fatal: No CONFIG_PERF_EVENTS=y kernel support configured?

Looking into perf, I found perf opens too many directories at
initialization time, but forgets to close them. Here is the fix.

LKML-Reference: <4C230362.5080704@cn.fujitsu.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

9 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes
Linus Torvalds [Fri, 16 Jul 2010 15:23:10 +0000]
Merge git://git./linux/kernel/git/steve/gfs2-2.6-fixes

* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes:
  GFS2: rename causes kernel Oops
  GFS2: BUG in gfs2_adjust_quota
  GFS2: Fix kernel NULL pointer dereference by dlm_astd
  GFS2: recovery stuck on transaction lock
  GFS2: O_TRUNC not working on stuffed files across cluster

9 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Linus Torvalds [Fri, 16 Jul 2010 15:22:40 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: w90p910_ts - fix call to setup_timer()
  Input: synaptics - fix wrong dimensions check
  Input: i8042 - mark stubs in i8042.h "static inline"

9 years agovhost: avoid pr_err on condition guest can trigger
Michael S. Tsirkin [Thu, 24 Jun 2010 14:10:25 +0000]
vhost: avoid pr_err on condition guest can trigger

Guest can trigger packet truncation by posting
a very short buffer and disabling buffer merging.
Convert pr_err to pr_debug to avoid log from filling
up when this happens.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

9 years agoInput: w90p910_ts - fix call to setup_timer()
Wan ZongShun [Fri, 16 Jul 2010 06:28:57 +0000]
Input: w90p910_ts - fix call to setup_timer()

No need to take address, w90p910_ts is already a pointer.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

9 years agoipmr: Don't leak memory if fib lookup fails.
Ben Greear [Thu, 15 Jul 2010 13:22:33 +0000]
ipmr: Don't leak memory if fib lookup fails.

This was detected using two mcast router tables.  The
pimreg for the second interface did not have a specific
mrule, so packets received by it were handled by the
default table, which had nothing configured.

This caused the ipmr_fib_lookup to fail, causing
the memory leak.

Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Linus Torvalds [Fri, 16 Jul 2010 03:25:44 +0000]
Merge git://git./linux/kernel/git/herbert/crypto-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: skcipher - avoid NULL dereference

9 years agoperf: Fix various display bugs with parent filtering
Frederic Weisbecker [Fri, 16 Jul 2010 02:02:14 +0000]
perf: Fix various display bugs with parent filtering

Hists that have been filtered, because they don't have callchains
matching the parent filter, won't be printed. As such,
hist_entry__snprintf() returns 0 for them, but we don't control
this value and we always print the buffer, which might be
untouched and then only made of random stack garbage.

Not only does it paint the screen with barf, it also prints
the callchains for these hists, even though they have been filtered,
since the hist has been filtered as well.

We need to check the return value of hist_entry__snprintf() and
ignore the hist if it is 0, which means it didn't get any callchain
matching the parent filter. This fixes the barf and the undesired
callchains.

Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>

9 years agodrm/radeon/kms: fix gtt MC base alignment on rs4xx/rs690/rs740 asics
Alex Deucher [Thu, 15 Jul 2010 14:51:10 +0000]
drm/radeon/kms: fix gtt MC base alignment on rs4xx/rs690/rs740 asics

The asics in question have the following requirements with regard to
their gart setups:

1. The GART aperture size has to be in the form of 2^X bytes, where X is from 25 to 31
2. The GART aperture MC base has to be aligned to a boundary equal to the size of the
aperture.
3. The GART page table has to be aligned to the boundary equal to the size of the table.
4. The GART page table size is: table_entry_size * (aperture_size / page_size)
5. The GART page table has to be allocated in non-paged, non-cached, contiguous system
memory.

This patch takes care 2.  The rest should already be handled properly.

This fixes a regression noticed by: Torsten Kaiser <just.for.lkml@googlemail.com>

Tested-by: Torsten Kaiser <just.for.lkml@googlemail.com>
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agojbd2/ocfs2: Fix block checksumming when a buffer is used in several transactions
Jan Kara [Wed, 14 Jul 2010 05:56:33 +0000]
jbd2/ocfs2: Fix block checksumming when a buffer is used in several transactions

OCFS2 uses t_commit trigger to compute and store checksum of the just
committed blocks. When a buffer has b_frozen_data, checksum is computed
for it instead of b_data but this can result in an old checksum being
written to the filesystem in the following scenario:

1) transaction1 is opened
2) handle1 is opened
3) journal_access(handle1, bh)
    - This sets jh->b_transaction to transaction1
4) modify(bh)
5) journal_dirty(handle1, bh)
6) handle1 is closed
7) start committing transaction1, opening transaction2
8) handle2 is opened
9) journal_access(handle2, bh)
    - This copies off b_frozen_data to make it safe for transaction1 to commit.
      jh->b_next_transaction is set to transaction2.
10) jbd2_journal_write_metadata() checksums b_frozen_data
11) the journal correctly writes b_frozen_data to the disk journal
12) handle2 is closed
    - There was no dirty call for the bh on handle2, so it is never queued for
      any more journal operation
13) Checkpointing finally happens, and it just spools the bh via normal buffer
writeback.  This will write b_data, which was never triggered on and thus
contains a wrong (old) checksum.

This patch fixes the problem by calling the trigger at the moment data is
frozen for journal commit - i.e., either when b_frozen_data is created by
do_get_write_access or just before we write a buffer to the log if
b_frozen_data does not exist. We also rename the trigger to t_frozen as
that better describes when it is called.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>

9 years agoocfs2/dlm: Remove BUG_ON from migration in the rare case of a down node
Wengang Wang [Wed, 14 Jul 2010 14:38:21 +0000]
ocfs2/dlm: Remove BUG_ON from migration in the rare case of a down node

For migration, we are waiting for DLM_LOCK_RES_MIGRATING flag to be set
before sending DLM_MIG_LOCKRES_MSG message to the target. We are using
dlm_migration_can_proceed() for that purpose.  However, if the node is
down, dlm_migration_can_proceed() will also return "go ahead".  In this
rare case, the DLM_LOCK_RES_MIGRATING flag might not be set yet. Remove
the BUG_ON() that trips over this condition.

Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>

9 years agoocfs2: Don't duplicate pages past i_size during CoW.
Tao Ma [Wed, 14 Jul 2010 03:19:32 +0000]
ocfs2: Don't duplicate pages past i_size during CoW.

During CoW, the pages after i_size don't contain valid data, so there's
no need to read and duplicate them.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>

9 years agox86: Force HPET readback_cmp for all ATI chipsets
Thomas Gleixner [Wed, 14 Jul 2010 19:36:27 +0000]
x86: Force HPET readback_cmp for all ATI chipsets

commit 30a564be (x86, hpet: Restrict read back to affected ATI
chipset) restricted the workaround for the HPET bug to SMX00
chipsets. This was reasonable as those were the only ones against
which we ever got a bug report.

Stephan Wolf reported now that this patch breaks his IXP400 based
machine. Though it's confirmed to work on other IXP400 based systems.

To error out on the safe side, we force the HPET readback workaround
for all ATI SMbus class chipsets.

Reported-by: Stephan Wolf <stephan@letzte-bankreihe.de>
LKML-Reference: <alpine.LFD.2.00.1007142134140.3321@localhost.localdomain>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Stephan Wolf <stephan@letzte-bankreihe.de>
Acked-by: Borislav Petkov <borislav.petkov@amd.com>

9 years agovhost-net: avoid flush under lock
Michael S. Tsirkin [Thu, 15 Jul 2010 12:19:12 +0000]
vhost-net: avoid flush under lock

We flush under vq mutex when changing backends.
This creates a deadlock as workqueue being flushed
needs this lock as well.

https://bugzilla.redhat.com/show_bug.cgi?id=612421

Drop the vq mutex before flush: we have the device mutex
which is sufficient to prevent another ioctl from touching
the vq.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

9 years agoGFS2: rename causes kernel Oops
Bob Peterson [Wed, 14 Jul 2010 22:12:26 +0000]
GFS2: rename causes kernel Oops

This patch fixes a kernel Oops in the GFS2 rename code.

The problem was in the way the gfs2 directory code was trying
to re-use sentinel directory entries.

In the failing case, gfs2's rename function was renaming a
file to another name that had the same non-trivial length.
The file being renamed happened to be the first directory
entry on the leaf block.

First, the rename code (gfs2_rename in ops_inode.c) found the
original directory entry and decided it could do its job by
simply replacing the directory entry with another.  Therefore
it determined correctly that no block allocations were needed.

Next, the rename code deleted the old directory entry prior to
replacing it with the new name.  Therefore, the soon-to-be
replaced directory entry was temporarily made into a directory
entry "sentinel" or a place holder at the start of a leaf block.

Lastly, it went to re-add the replacement directory entry in
that leaf block.  However, when gfs2_dirent_find_space was
looking for space in the leaf block, it used the wrong value
for the sentinel.  That threw off its calculations so later
it decides it can't really re-use the sentinel and therefore
must allocate a new leaf block.  But because it previously decided
to re-use the directory entry, it didn't waste the time to
grab a new block allocation for the inode.  Therefore, the
inode's i_alloc pointer was still NULL and it crashes trying to
reference it.

In the case of sentinel directory entries, the entire dirent is
reused, not just the "free space" portion of it, and therefore
the function gfs2_dirent_find_space should use the value 0
rather than GFS2_DIRENT_SIZE(0) for the actual dirent size.

Fixing this calculation enables the reproducer programs to work
properly.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>

9 years agoGFS2: BUG in gfs2_adjust_quota
Abhijith Das [Sun, 4 Jul 2010 05:33:24 +0000]
GFS2: BUG in gfs2_adjust_quota

HighMem pages on i686 do not get mapped to the buffer_heads and this was
causing a NULL pointer dereference when we were trying to memset page buffers
to zero.
We now use zero_user() that kmaps the page and directly manipulates page data.
This patch also fixes a boundary condition that was incorrect.

Signed-off-by: Abhi Das <adas@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>

9 years agoGFS2: Fix kernel NULL pointer dereference by dlm_astd
Bob Peterson [Thu, 17 Jun 2010 20:45:37 +0000]
GFS2: Fix kernel NULL pointer dereference by dlm_astd

This patch fixes a problem in an error path when looking
up dinodes.  There are two sister-functions, gfs2_inode_lookup
and gfs2_process_unlinked_inode.  Both functions acquire and
hold the i_iopen glock for the dinode being looked up. The last
thing they try to do is hold the i_gl glock for the dinode.
If that glock fails for some reason, the error path was
incorrectly calling gfs2_glock_put for the i_iopen glock twice.
This resulted in the glock being prematurely freed.  The
"minimum hold time" usually kept the glock in memory, but the
lock interface to dlm (aka lock_dlm) freed its memory for the
glock.  In some circumstances, it would cause dlm's dlm_astd daemon
to try to call the bast function for the freed lock_dlm memory,
which resulted in a NULL pointer dereference.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>

9 years agoGFS2: recovery stuck on transaction lock
Bob Peterson [Wed, 23 Jun 2010 15:44:47 +0000]
GFS2: recovery stuck on transaction lock

This patch fixes bugzilla bug #590878: GFS2: recovery stuck on
transaction lock.  We set the frozen flag on the glock when we receive
a completion that cannot be delivered due to blocked locks. At that
point we check to see whether the first waiting holder has the noexp
flag set. If the noexp lock is queued later, then we need to unfreeze
the glock at that point in time, namely, in the glock work function.

This patch was originally written by Steve Whitehouse, but since
he's on holiday, I'm submitting it.  It's been well tested with a
complex recovery test called revolver.

Signed-off-by: Steve Whitehouse <swhiteho@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>

9 years agoGFS2: O_TRUNC not working on stuffed files across cluster
Bob Peterson [Thu, 24 Jun 2010 23:15:09 +0000]
GFS2: O_TRUNC not working on stuffed files across cluster

This patch replaces a statement that got dropped out by accident.
Without the patch, truncates on stuffed (very small) files cause
those files to have an unpredictable size.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>

9 years agoperf: Add DWARF register lookup for sparc
David S. Miller [Thu, 15 Jul 2010 05:59:00 +0000]
perf: Add DWARF register lookup for sparc

Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agonet: fix problem in reading sock TX queue
Tom Herbert [Thu, 15 Jul 2010 03:50:29 +0000]
net: fix problem in reading sock TX queue

Fix problem in reading the tx_queue recorded in a socket.  In
dev_pick_tx, the TX queue is read by doing a check with
sk_tx_queue_recorded on the socket, followed by a sk_tx_queue_get.
The problem is that there is not mutual exclusion across these
calls in the socket so it it is possible that the queue in the
sock can be invalidated after sk_tx_queue_recorded is called so
that sk_tx_queue get returns -1, which sets 65535 in queue_index
and thus dev_pick_tx returns 65536 which is a bogus queue and
can cause crash in dev_queue_xmit.

We fix this by only calling sk_tx_queue_get which does the proper
checks.  The interface is that sk_tx_queue_get returns the TX queue
if the sock argument is non-NULL and TX queue is recorded, else it
returns -1.  sk_tx_queue_recorded is no longer used so it can be
completely removed.

Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agonet/core: neighbour update Oops
Doug Kehn [Thu, 15 Jul 2010 01:02:16 +0000]
net/core: neighbour update Oops

When configuring DMVPN (GRE + openNHRP) and a GRE remote
address is configured a kernel Oops is observed.  The
obserseved Oops is caused by a NULL header_ops pointer
(neigh->dev->header_ops) in neigh_update_hhs() when

void (*update)(struct hh_cache*, const struct net_device*, const unsigned char *)
= neigh->dev->header_ops->cache_update;

is executed.  The dev associated with the NULL header_ops is
the GRE interface.  This patch guards against the
possibility that header_ops is NULL.

This Oops was first observed in kernel version 2.6.26.8.

Signed-off-by: Doug Kehn <rdkehn@yahoo.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoMerge master.kernel.org:/home/rmk/linux-2.6-arm
Linus Torvalds [Thu, 15 Jul 2010 00:28:13 +0000]
Merge master.kernel.org:/home/rmk/linux-2.6-arm

* master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: 6226/1: fix kprobe bug in ldr instruction emulation
  ARM: Update mach-types
  ARM: lockdep: fix unannotated irqs-on
  ARM: 6184/2: ux500: use neutral PRCMU base
  ARM: 6212/1: atomic ops: add memory constraints to inline asm
  ARM: 6211/1: atomic ops: fix register constraints for atomic64_add_unless
  ARM: 6210/1: Do not rely on reset defaults of L2X0_AUX_CTRL

9 years agoMerge branch 'lmb-to-memblock' of git://git.kernel.org/pub/scm/linux/kernel/git/benh...
Linus Torvalds [Thu, 15 Jul 2010 00:27:44 +0000]
Merge branch 'lmb-to-memblock' of git://git./linux/kernel/git/benh/powerpc

* 'lmb-to-memblock' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  lmb: rename to memblock

9 years agoMerge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Linus Torvalds [Thu, 15 Jul 2010 00:27:29 +0000]
Merge branch 'merge' of git://git./linux/kernel/git/benh/powerpc

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc/fsl-booke: Fix address issue when using relocatable kernels
  powerpc/cpm1: Mark micropatch code/data static and __init
  powerpc/cpm1: Fix build with various CONFIG_*_UCODE_PATCH combinations
  powerpc/cpm: Reintroduce global spi_pram struct (fixes build issue)

9 years agonet: skb_tx_hash() fix relative to skb_orphan_try()
Eric Dumazet [Tue, 13 Jul 2010 05:24:20 +0000]
net: skb_tx_hash() fix relative to skb_orphan_try()

commit fc6055a5ba31e2 (net: Introduce skb_orphan_try()) added early
orphaning of skbs.

This unfortunately added a performance regression in skb_tx_hash() in
case of stacked devices (bonding, vlans, ...)

Since skb->sk is now NULL, we cannot access sk->sk_hash anymore to
spread tx packets to multiple NIC queues on multiqueue devices.

skb_tx_hash() in this case only uses skb->protocol, same value for all
flows.

skb_orphan_try() can copy sk->sk_hash into skb->rxhash and skb_tx_hash()
can use this saved sk_hash value to compute its internal hash value.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoARM: 6226/1: fix kprobe bug in ldr instruction emulation
Nicolas Pitre [Wed, 14 Jul 2010 04:21:22 +0000]
ARM: 6226/1: fix kprobe bug in ldr instruction emulation

From: Bin Yang <bin.yang@marvell.com>

Cc: stable@kernel.org
Signed-off-by: Bin Yang <bin.yang@marvell.com>
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

9 years agorfs: call sock_rps_record_flow() in tcp_splice_read()
Changli Gao [Mon, 12 Jul 2010 21:00:12 +0000]
rfs: call sock_rps_record_flow() in tcp_splice_read()

rfs: call sock_rps_record_flow() in tcp_splice_read()

call sock_rps_record_flow() in tcp_splice_read(), so the applications using
splice(2) or sendfile(2) can utilize RFS.

Signed-off-by: Changli Gao <xiaosuo@gmail.com>
----
 net/ipv4/tcp.c |    1 +
 1 file changed, 1 insertion(+)
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoxfrm: do not assume that template resolving always returns xfrms
Timo Teräs [Mon, 12 Jul 2010 21:29:42 +0000]
xfrm: do not assume that template resolving always returns xfrms

xfrm_resolve_and_create_bundle() assumed that, if policies indicated
presence of xfrms, bundle template resolution would always return
some xfrms. This is not true for 'use' level policies which can
result in no xfrm's being applied if there is no suitable xfrm states.
This fixes a crash by this incorrect assumption.

Reported-by: George Spelvin <linux@horizon.com>
Bisected-by: George Spelvin <linux@horizon.com>
Tested-by: George Spelvin <linux@horizon.com>
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoASoC:: remove a redundant snd_soc_unregister_codec call in wm8988_register
Axel Lin [Wed, 14 Jul 2010 11:06:07 +0000]
ASoC:: remove a redundant snd_soc_unregister_codec call in wm8988_register

snd_soc_unregister_codec is called twice if snd_soc_register_dai fail.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

9 years agoASoC: wm8727: add a missing return in wm8727_platform_probe
Axel Lin [Wed, 14 Jul 2010 10:57:31 +0000]
ASoC: wm8727: add a missing return in wm8727_platform_probe

otherwise the error path will always be executed.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

9 years agohostap_pci: set dev->base_addr during probe
John W. Linville [Tue, 13 Jul 2010 18:06:32 +0000]
hostap_pci: set dev->base_addr during probe

"hostap: Protect against initialization interrupt" (which reinstated
"wireless: hostap, fix oops due to early probing interrupt")
reintroduced Bug 16111.  This is because hostap_pci wasn't setting
dev->base_addr, which is now checked in prism2_interrupt.  As a result,
initialization was failing for PCI-based hostap devices.  This corrects
that oversight.

Signed-off-by: John W. Linville <linville@tuxdriver.com>

9 years agoInput: synaptics - fix wrong dimensions check
Takashi Iwai [Wed, 14 Jul 2010 16:32:46 +0000]
Input: synaptics - fix wrong dimensions check

The commit 83ba9ea8a04b72dfee2515428c15e7414ba4fc61 ommitted the return
line for the old synaptics model accidentally.  This resulted in a wrong
check, namely, the dimensions are checked for the old devices that don't
support the query properly.

This patch adds the return line back.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

9 years agolmb: rename to memblock
Yinghai Lu [Mon, 12 Jul 2010 04:36:09 +0000]
lmb: rename to memblock

via following scripts

      FILES=$(find * -type f | grep -vE 'oprofile|[^K]config')

      sed -i \
        -e 's/lmb/memblock/g' \
        -e 's/LMB/MEMBLOCK/g' \
        $FILES

      for N in $(find . -name lmb.[ch]); do
        M=$(echo $N | sed 's/lmb/memblock/g')
        mv $N $M
      done

and remove some wrong change like lmbench and dlmb etc.

also move memblock.c from lib/ to mm/

Suggested-by: Ingo Molnar <mingo@elte.hu>
Acked-by: "H. Peter Anvin" <hpa@zytor.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

9 years agoMerge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Wed, 14 Jul 2010 00:31:11 +0000]
Merge branch 'x86-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  input: i8042 - add runtime check in x86's i8042_platform_init
  Revert "Input: fixup X86_MRST selects"
  Revert "Input: do not force selecting i8042 on Moorestown"
  x86, mrst: Add i8042_detect API for Moorestwon platform
  x86: Add i8042 pre-detection hook to x86_platform_ops
  x86, platform: Export x86_platform to modules

9 years agoMerge branch 'kvm-updates/2.6.35' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Linus Torvalds [Wed, 14 Jul 2010 00:30:49 +0000]
Merge branch 'kvm-updates/2.6.35' of git://git./virt/kvm/kvm

* 'kvm-updates/2.6.35' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: MMU: flush remote tlbs when overwriting spte with different pfn
  KVM: VMX: Fix host MSR_KERNEL_GS_BASE corruption

9 years agodrm/radeon/kms: fix possible mis-detection of sideport on rs690/rs740
Alex Deucher [Mon, 12 Jul 2010 21:33:50 +0000]
drm/radeon/kms: fix possible mis-detection of sideport on rs690/rs740

Check ulBootUpMemoryClock on AMD IGPs.

Fix regression noticed by Torsten Kaiser <just.for.lkml@googlemail.com>

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agoASoC: fsi: fixup wrong value setting order of TDM
Kuninori Morimoto [Tue, 13 Jul 2010 03:01:25 +0000]
ASoC: fsi: fixup wrong value setting order of TDM

channel size should be set before setting register value

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

9 years agoASoC: fsi: fixup clock inversion operation
Kuninori Morimoto [Tue, 13 Jul 2010 03:01:15 +0000]
ASoC: fsi: fixup clock inversion operation

Clock inversion should be specified by each flags bit.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

9 years agoMAINTAINERS: Add SBUS driver path to sparc entry.
David S. Miller [Tue, 13 Jul 2010 04:18:54 +0000]
MAINTAINERS: Add SBUS driver path to sparc entry.

Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agodrivers/sbus: Remove unnecessary casts of private_data
Joe Perches [Tue, 13 Jul 2010 04:16:04 +0000]
drivers/sbus: Remove unnecessary casts of private_data

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoaxnet_cs: use spin_lock_irqsave in ax_interrupt
Ken Kawasaki [Sat, 10 Jul 2010 01:18:13 +0000]
axnet_cs: use spin_lock_irqsave in ax_interrupt

Use spin_lock_irqsave instead of spin_lock in ax_interrupt because
the interrupt handler can also be invoked from ei_watchdog.

Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agodsa: Fix Kconfig dependencies.
David S. Miller [Tue, 13 Jul 2010 03:03:42 +0000]
dsa: Fix Kconfig dependencies.

Based upon a report by Randy Dunlap.

DSA needs PHYLIB, but PHYLIB needs NET_ETHERNET.  So, in order
to select PHYLIB we have to make DSA depend upon NET_ETHERNET.

Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoact_nat: not all of the ICMP packets need an IP header payload
Changli Gao [Fri, 9 Jul 2010 15:33:25 +0000]
act_nat: not all of the ICMP packets need an IP header payload

not all of the ICMP packets need an IP header payload, so we check the length
of the skbs only when the packets should have an IP header payload.

Based upon analysis and initial patch by Rodrigo Partearroyo González.

Signed-off-by: Changli Gao <xiaosuo@gmail.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
----
 net/sched/act_nat.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agodrm/radeon/kms: fix legacy tv-out pal mode
Alex Deucher [Sat, 6 Mar 2010 14:43:41 +0000]
drm/radeon/kms: fix legacy tv-out pal mode

fixes fdo bug 26915

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirel...
David S. Miller [Mon, 12 Jul 2010 22:17:29 +0000]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless-2.6

9 years agoLinux 2.6.35-rc5
Linus Torvalds [Mon, 12 Jul 2010 21:55:33 +0000]
Linux 2.6.35-rc5

9 years agoMerge branch 'arm/defconfig/reduced-v2.6.35-rc1' of git://git.pengutronix.de/git...
Linus Torvalds [Mon, 12 Jul 2010 21:47:01 +0000]
Merge branch 'arm/defconfig/reduced-v2.6.35-rc1' of git://git.pengutronix.de/git/ukl/linux-2.6

* 'arm/defconfig/reduced-v2.6.35-rc1' of git://git.pengutronix.de/git/ukl/linux-2.6:
  ARM: reduce defconfigs

This is a big change, but results in no loss of information, despite us
losing almost 200k lines:

 177 files changed, 652 insertions(+), 194157 deletions(-)

and Grant Likely thinks powerpc can also use the same reduction
technique.

The python script that did the reduction looks like this:

    #! /usr/bin/env python
    # vim: set fileencoding=utf-8 :
    # Copyright (C) 2010 by Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

    import re
    import subprocess
    import os
    import sys

    # This prevents including a timestamp in the .config which makes comparing a
    # bit easier.
    os.environ['KCONFIG_NOTIMESTAMP'] = 'Yes, please'

    # XXX: get these using getopt
    kernel_tree = '' # os.path.join(os.environ['HOME'], 'gsrc', 'linux-2.6')
    arch = 'arm'
    target = sys.argv[1]
    defconfig_src = os.path.join(kernel_tree, 'arch/%s/configs/%s' % (arch, target))

    subprocess.check_call(['make', '-s', 'ARCH=%s' % arch, target])
    origconfig = list(open('.config'))
    config = list(origconfig)
    config_size = os.stat('.config').st_size

    i = 0

    while i < len(config):
        print 'test for %r' % config[i]
        defconfig = open(defconfig_src, 'w')
        defconfig.writelines(config[:i])
        defconfig.writelines(config[i + 1:])
        defconfig.close()
        subprocess.check_call(['make', '-s', 'ARCH=%s' % arch, target])
        if os.stat('.config').st_size == config_size and list(open('.config')) == origconfig:
            del config[i]
        else:
            i += 1

    defconfig = open(defconfig_src, 'w')
    defconfig.writelines(config)
    defconfig.close()

which is pretty self-explanatory.

Acked-by: Nicolas Pitre <nico@fluxnic.net>
Acked-by: Russell King <linux@arm.linux.org.uk>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoMerge branch 'fix/hda' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
Linus Torvalds [Mon, 12 Jul 2010 21:44:43 +0000]
Merge branch 'fix/hda' of git://git./linux/kernel/git/tiwai/sound-2.6

* 'fix/hda' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: hda - Restore cleared pin controls on resume

9 years agoMerge branch 'v4l_for_2.6.35' of git://git.kernel.org/pub/scm/linux/kernel/git/mcheha...
Linus Torvalds [Mon, 12 Jul 2010 21:44:19 +0000]
Merge branch 'v4l_for_2.6.35' of git://git./linux/kernel/git/mchehab/linux-2.6

* 'v4l_for_2.6.35' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6:
  V4L/DVB: uvc: Fix multiple symbols definitions with UVC gadget and host drivers
  V4L/DVB: v4l: mem2mem_testdev: fix g_fmt NULL pointer dereference
  V4L/DVB: uvcvideo: Power line frequency control doesn't support GET_MIN/MAX/RES
  V4L/DVB: ivtv: Add delay to ensure the decoder always restarts with a blank screen
  V4L/DVB: Documentation: Add the Philips FQ1236 MK5 to video4linux/CARDLIST.tuner
  V4L/DVB: tveeprom: Add an entry for tuner code 168: a TCL M30WTP-4N-E tuner
  V4L/DVB: tuner: Add a definition for the Philips FQ1236 MK5 NTSC tuner
  V4L/DVB: OMAP_VOUT: fix: Module params were not working through bootargs
  V4L/DVB: OMAP_VOUT: fix: Replaced dma-sg with dma-contig
  V4L/DVB: OMAP_VOUT:Build FIX: Rebased against latest DSS2 changes

9 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
Linus Torvalds [Mon, 12 Jul 2010 21:42:21 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/jikos/hid

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: Send Report ID when numbered reports are sent over the control endpoint.
  HID: Enable HID_QUIRK_MULTI_INPUT for Retro Adaptor
  HID: add support for CH Eclipse yoke
  HID: eliminate a double lock in debug code
  HID: ntrig: add support for new firwmare versions
  HID: check for HID_QUIRK_IGNORE during probing
  HID: roccat: fix modules interdependencies

9 years agoMAINTAINERS: fix EDAC-I7CORE file patterns
Joe Perches [Mon, 12 Jul 2010 20:45:49 +0000]
MAINTAINERS: fix EDAC-I7CORE file patterns

File patterns are one per line.
Fixed include file location.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoocfs2: tighten up strlen() checking
Dan Carpenter [Sat, 10 Jul 2010 14:33:36 +0000]
ocfs2: tighten up strlen() checking

This function is only called from one place and it's like this:
dlm_register_domain(conn->cc_name, dlm_key, &fs_version);

The "conn->cc_name" is 64 characters long.  If strlen(conn->cc_name)
were equal to O2NM_MAX_NAME_LEN (64) that would be a bug because
strlen() doesn't count the NULL character.

In fact, if you look how O2NM_MAX_NAME_LEN is used, it mostly describes
64 character buffers.  The only exception is nd_name from struct
o2nm_node.

Anyway I looked into it and in this case the domain string comes from
osb->uuid_str in ocfs2_setup_osb_uuid().  That's 32 characters and NULL
which easily fits into O2NM_MAX_NAME_LEN.  This patch doesn't change how
the code works, but I think it makes the code a little cleaner.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>

9 years agoocfs2: Make xattr reflink work with new local alloc reservation.
Tao Ma [Fri, 9 Jul 2010 06:53:12 +0000]
ocfs2: Make xattr reflink work with new local alloc reservation.

The new reservation code in local alloc has add the limitation
that the caller should handle the case that the local alloc
doesn't give use enough contiguous clusters. It make the old
xattr reflink code broken.

So this patch udpate the xattr reflink code so that it can
handle the case that local alloc give us one cluster at a time.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>

9 years agoocfs2: make xattr extension work with new local alloc reservation.
Tao Ma [Fri, 9 Jul 2010 06:53:11 +0000]
ocfs2: make xattr extension work with new local alloc reservation.

The old ocfs2_xattr_extent_allocation is too optimistic about
the clusters we can get. So actually if the file system is
too fragmented, ocfs2_add_clusters_in_btree will return us
with EGAIN and we need to allocate clusters once again.

So this patch change it to a while loop so that we can allocate
clusters until we reach clusters_to_add.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Cc: stable@kernel.org

9 years agoocfs2: Remove the redundant cpu_to_le64.
Tao Ma [Thu, 8 Jul 2010 03:11:11 +0000]
ocfs2: Remove the redundant cpu_to_le64.

In ocfs2_block_group_alloc, we set c_blkno by bg->bg_blkno.
But actually bg->bg_blkno is already changed to little endian
in ocfs2_block_group_fill. So remove the extra cpu_to_le64.

Reported-by: Marcos Matsunaga <Marcos.Matsunaga@oracle.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>

9 years agoocfs2/dlm: don't access beyond bitmap size
Wengang Wang [Wed, 30 Jun 2010 12:23:30 +0000]
ocfs2/dlm: don't access beyond bitmap size

dlm->recovery_map is defined as
unsigned long recovery_map[BITS_TO_LONGS(O2NM_MAX_NODES)];

We should treat O2NM_MAX_NODES as the bit map size in bits.
This patches fixes a bit operation that takes O2NM_MAX_NODES + 1 as bitmap size.

Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>

9 years agoocfs2: No need to zero pages past i_size.
Joel Becker [Sat, 3 Jul 2010 00:20:27 +0000]
ocfs2: No need to zero pages past i_size.

When ocfs2 fills a hole, it does so by allocating clusters.  When a
cluster is larger than the write, ocfs2 must zero the portions of the
cluster outside of the write.  If the clustersize is smaller than a
pagecache page, this is handled by the normal pagecache mechanisms, but
when the clustersize is larger than a page, ocfs2's write code will zero
the pages adjacent to the write.  This makes sure the entire cluster is
zeroed correctly.

Currently ocfs2 behaves exactly the same when writing past i_size.
However, this means ocfs2 is writing zeroed pages for portions of a new
cluster that are beyond i_size.  The page writeback code isn't expecting
this.  It treats all pages past the one containing i_size as left behind
due to a previous truncate operation.

Thankfully, ocfs2 calculates the number of pages it will be working on
up front.  The rest of the write code merely honors the original
calculation.  We can simply trim the number of pages to only cover the
actual file data.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Cc: stable@kernel.org

9 years agoARM: Update mach-types
Russell King [Mon, 12 Jul 2010 20:10:16 +0000]
ARM: Update mach-types

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

9 years agoACPI: processor: fix processor_physically_present on UP
Alex Chiang [Thu, 17 Jun 2010 15:08:54 +0000]
ACPI: processor: fix processor_physically_present on UP

The commit 5d554a7bb06 (ACPI: processor: add internal
processor_physically_present()) is broken on uniprocessor (UP)
configurations, as acpi_get_cpuid() will always return -1.

We use the value of num_possible_cpus() to tell us whether we got
an invalid cpuid from acpi_get_cpuid() in the SMP case, or if
instead, we are UP, in which case num_possible_cpus() is #defined
as 1.

We use num_possible_cpus() instead of num_online_cpus() to
protect ourselves against the scenario of CPU hotplug, and we've
taken down all the CPUs except one.

Thanks to Jan Pogadl for initial report and analysis and Chen
Gong for review.

https://bugzilla.kernel.org/show_bug.cgi?id=16357

Reported-by: Jan Pogadl <pogadl.jan@googlemail.com>:
Reviewed-by: Chen Gong <gong.chen@linux.intel.com>
Signed-off-by: Alex Chiang <achiang@canonical.com>
Signed-off-by: Len Brown <len.brown@intel.com>

9 years agoKVM: MMU: flush remote tlbs when overwriting spte with different pfn
Xiao Guangrong [Wed, 30 Jun 2010 08:04:06 +0000]
KVM: MMU: flush remote tlbs when overwriting spte with different pfn

After remove a rmap, we should flush all vcpu's tlb

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

9 years agor8169: incorrect identifier for a 8168dp
Francois Romieu [Mon, 12 Jul 2010 00:10:09 +0000]
r8169: incorrect identifier for a 8168dp

Merge error.

See CFG_METHOD_8 (0x3c800000 + 0x00300000) since version 8.002.00
of Realtek's driver.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Hayes <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoHID: Send Report ID when numbered reports are sent over the control endpoint.
Alan Ott [Wed, 30 Jun 2010 13:50:36 +0000]
HID: Send Report ID when numbered reports are sent over the control endpoint.

The Report ID wasn't sent as part of the payload for reports which were sent
over the control endpoint. This is required by section 8.1 of the HID spec.

Signed-off-by: Alan Ott <alan@signal11.us>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

9 years agoV4L/DVB: uvc: Fix multiple symbols definitions with UVC gadget and host drivers
Laurent Pinchart [Sat, 10 Jul 2010 19:13:05 +0000]
V4L/DVB: uvc: Fix multiple symbols definitions with UVC gadget and host drivers

The UVC gadget driver borrowed code from the UVC host driver without
changing the symbol names. This results in a namespace clash with
multiple definitions of several symbols when compiling both drivers in
the kernel.

Make all generic UVC functions and variables static in the UVC gadget
driver, as the symbols are not referenced outside of the gadget driver.
Rename the uvc_trace_param global variable to uvc_gadget_trace_param.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

9 years agoMerge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelv...
Linus Torvalds [Sun, 11 Jul 2010 20:35:34 +0000]
Merge branch 'hwmon-for-linus' of git://git./linux/kernel/git/jdelvare/staging

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  hwmon: Fix autoloading of fschmd on recent Fujitsu machines
  hwmon: (coretemp) Properly label the sensors
  hwmon: (coretemp) Skip duplicate CPU entries
  hwmon: (it87) Fix in7 on IT8720F
  hwmon: (k8temp) Fix temperature reporting for ASB1 processor revisions

9 years agoMerge branch 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvar...
Linus Torvalds [Sun, 11 Jul 2010 20:32:55 +0000]
Merge branch 'i2c-for-linus' of git://git./linux/kernel/git/jdelvare/staging

* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  i2c/mips: Fix error return codes from Sibyte i2c bus driver
  i2c: Fix probability check

9 years agoHID: Enable HID_QUIRK_MULTI_INPUT for Retro Adaptor
Peter Edwards [Sun, 11 Jul 2010 16:45:50 +0000]
HID: Enable HID_QUIRK_MULTI_INPUT for Retro Adaptor

Patch for linux-2.6.35-rc4 mainline kernel to enable Paul Qureshi's
Retro Adapter [http://keio.dk/retroadapter.html], an open source USB
device which allows controllers and joysticks from classic computers
and consoles to work on modern PCs, to appear as two separate devices
under Linux.
Signed-off-by: Peter Edwards <samwise@bagshot-row.org>
Acked-by: Paul Qureshi <retro@world3.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

9 years agoHID: add support for CH Eclipse yoke
Jonathan Rockway [Sat, 3 Jul 2010 07:59:01 +0000]
HID: add support for CH Eclipse yoke

This USB flight yoke needs the NOGET quirk, like most of CH's other
products. This patch adds that.

Signed-off-by: Jonathan Rockway <jon@jrock.us>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>