8 years agoneigh: Pass neighbour entry to output ops.
David S. Miller [Sun, 17 Jul 2011 20:34:11 +0000]
neigh: Pass neighbour entry to output ops.

This will get us closer to being able to do "neigh stuff"
completely independent of the underlying dst_entry for
protocols (ipv4/ipv6) that wish to do so.

We will also be able to make dst entries neigh-less.

Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonet: vlan, qlcnic: make vlan_find_dev private
David Lamparter [Sun, 17 Jul 2011 08:53:12 +0000]
net: vlan, qlcnic: make vlan_find_dev private

there is only one user of vlan_find_dev outside of the actual vlan code:
qlcnic uses it to iterate over some VLANs it knows.

let's just make vlan_find_dev private to the VLAN code and have the
iteration in qlcnic be a bit more direct. (a few rcu dereferences less
too)

Signed-off-by: David Lamparter <equinox@diac24.net>
Cc: Patrick McHardy <kaber@trash.net>
Cc: Amit Kumar Salecha <amit.salecha@qlogic.com>
Cc: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Cc: linux-driver@qlogic.com
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonet: add 802.1ad / 802.1ah / QinQ ethertypes
David Lamparter [Sun, 17 Jul 2011 08:32:12 +0000]
net: add 802.1ad / 802.1ah / QinQ ethertypes

define ETH_P_8021AD to 88a8 (assigned by IEEE) and add ETH_P_QINQ{1,2,3}
for the pre-standard 9{1,2,3}00 types. all of them use 802.1q frame
format, with 1 bit used differently in some cases.

also define ETH_P_8021AH to 88e7 (assigned by IEEE). this is Mac-in-Mac
and uses a different, 16-byte header.

Signed-off-by: David Lamparter <equinox@diac24.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoneigh: Kill ndisc_ops->queue_xmit
David S. Miller [Sun, 17 Jul 2011 01:06:24 +0000]
neigh: Kill ndisc_ops->queue_xmit

It is always dev_queue_xmit().

Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoneigh: Kill hh_cache->hh_output
David S. Miller [Sun, 17 Jul 2011 00:45:02 +0000]
neigh: Kill hh_cache->hh_output

It's just taking on one of two possible values, either
neigh_ops->output or dev_queue_xmit().  And this is purely depending
upon whether nud_state has NUD_CONNECTED set or not.

Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoneigh: Kill neigh_ops->hh_output
David S. Miller [Sun, 17 Jul 2011 00:39:57 +0000]
neigh: Kill neigh_ops->hh_output

It's always dev_queue_xmit().

Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoneigh: Simply destroy handling wrt. hh_cache.
David S. Miller [Sun, 17 Jul 2011 00:36:53 +0000]
neigh: Simply destroy handling wrt. hh_cache.

Now that hh_cache entries are embedded inside of neighbour
entries, their lifetimes and accesses are now synchronous
to that of the encompassing neighbour object.

Therefore we don't need to hook up the blackhole op to
hh_output on destroy.

Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonet: Create and use new helper, neigh_output().
David S. Miller [Sun, 17 Jul 2011 00:26:00 +0000]
net: Create and use new helper, neigh_output().

Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoipv6: Use calculated 'neigh' instead of re-evaluating dst->neighbour
David S. Miller [Sat, 16 Jul 2011 21:30:47 +0000]
ipv6: Use calculated 'neigh' instead of re-evaluating dst->neighbour

Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoipv4: Use calculated 'neigh' instead of re-evaluating dst->neighbour
David S. Miller [Sat, 16 Jul 2011 21:25:54 +0000]
ipv4: Use calculated 'neigh' instead of re-evaluating dst->neighbour

Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agobnx2x: Fix compilation when CNIC is not selected in config
Dmitry Kravkov [Sat, 16 Jul 2011 20:35:51 +0000]
bnx2x: Fix compilation when CNIC is not selected in config

Reported-by:  Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years ago68360enet: Remove Kconfig/Makefile references
Jeff Kirsher [Sat, 16 Jul 2011 19:35:27 +0000]
68360enet: Remove Kconfig/Makefile references

68360enet.c no longer exists, and from the research, it appears that
68360enet.c became fec.c back in 2004.  The Kconfig and Makefile
references were never cleaned up.  This patch removes this "dead"
references.

Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agobnx2: Close device if tx_timeout reset fails
Michael Chan [Fri, 15 Jul 2011 06:53:58 +0000]
bnx2: Close device if tx_timeout reset fails

Based on original patch and description from Flavio Leitner <fbl@redhat.com>

When bnx2_reset_task() is called, it will stop,
(re)initialize and start the interface to restore
the working condition.

The bnx2_init_nic() calls bnx2_reset_nic() which will
reset the chip and then calls bnx2_free_skbs() to free
all the skbs.

The problem happens when bnx2_init_chip() fails because
bnx2_reset_nic() will just return skipping the ring
initializations at bnx2_init_all_rings(). Later, the
reset task starts the interface again and the system
crashes due a NULL pointer access (no skb in the ring).

To fix it, we call dev_close() if bnx2_init_nic() fails.
One minor wrinkle to deal with is the cancel_work_sync()
call in bnx2_close() to cancel bnx2_reset_task().  The
call will wait forever because it is trying to cancel
itself and the workqueue will be stuck.

Since bnx2_reset_task() holds the rtnl_lock() and checks
for netif_running() before proceeding, there is no need
to cancel bnx2_reset_task() in bnx2_close() even if
bnx2_close() and bnx2_reset_task() are running concurrently.
The rtnl_lock() serializes the 2 calls.

We need to move the cancel_work_sync() call to
bnx2_remove_one() to make sure it is canceled before freeing
the netdev struct.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Cc: Flavio Leitner <fbl@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoMerge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville...
David S. Miller [Fri, 15 Jul 2011 15:51:13 +0000]
Merge branch 'for-davem' of git://git./linux/kernel/git/linville/wireless-next-2.6

8 years ago8139cp: convert to new VLAN model.
françois romieu [Fri, 15 Jul 2011 00:21:44 +0000]
8139cp: convert to new VLAN model.

The registers and descriptors bits are identical to the pre-8168
8169 chipsets : {RxDesc / TxDesc}.opts2 can only contain VLAN information.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Reviewed-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoRemove redundant variable/code in __qdisc_run
Krishna Kumar [Thu, 14 Jul 2011 23:16:21 +0000]
Remove redundant variable/code in __qdisc_run

Remove redundant variable "work".

Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoslcan: remove obsolete code in slcan initialisation
Oliver Hartkopp [Thu, 14 Jul 2011 21:49:19 +0000]
slcan: remove obsolete code in slcan initialisation

This patch removes obsolete code in the initialisation/creation of
slcan devices.

It follows the suggested cleanups from Ilya Matvejchikov in
drivers/net/slip.c that where recently applied to net-next-2.6:

- slip: remove dead code within the slip initialization
- slip: remove redundant check slip_devs for NULL

Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoSeparate handling of irq type flags variable from the irq_flags request_irq variable
Shyam Iyer [Thu, 14 Jul 2011 15:00:32 +0000]
Separate handling of irq type flags variable from the irq_flags request_irq variable

Commit 5f77898de17ff983ff0e2988b73a6bdf4b6f9f8b does not completely
fix the problem of handling allocations with irqs disabled..  The
below patch on top of it fixes the problem completely.

Based on review by "Ivan Vecera" <ivecera@redhat.com>..
"
Small note, the root of the problem was that non-atomic allocation was requested with IRQs disabled. Your patch description does not contain wwhy were the IRQs disabled.

The function bnad_mbox_irq_alloc incorrectly uses 'flags' var for two different things, 1) to save current CPU flags and 2) for request_irq
call.
First the spin_lock_irqsave disables the IRQs and saves _all_ CPU flags (including one that enables/disables interrupts) to 'flags'. Then the 'flags' is overwritten by 0 or 0x80 (IRQF_SHARED). Finally the spin_unlock_irqrestore should restore saved flags, but these flags are now either 0x00 or 0x80. The interrupt bit value in flags register on x86 arch is 0x100.
This means that the interrupt bit is zero (IRQs disabled) after spin_unlock_irqrestore so the request_irq function is called with disabled interrupts.
"

Signed-off-by: Shyam Iyer <shyam_iyer@dell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirel...
John W. Linville [Fri, 15 Jul 2011 14:05:24 +0000]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless-next-2.6 into for-davem

Conflicts:
net/bluetooth/l2cap_core.c

8 years agonet/ps3: Fix gelic RX DMA restart
Geoff Levand [Thu, 14 Jul 2011 23:03:29 +0000]
net/ps3: Fix gelic RX DMA restart

Fix the condition where PS3 network RX hangs when no network
TX is occurring by calling gelic_card_enable_rxdmac() during
RX_DMA_CHAIN_END event processing.

The gelic hardware automatically clears its RX_DMA_EN flag when
it detects an RX_DMA_CHAIN_END event.  In its processing of
RX_DMA_CHAIN_END the gelic driver is required to set RX_DMA_EN
(with a call to gelic_card_enable_rxdmac()) to restart RX DMA
transfers.  The existing gelic driver code does not set
RX_DMA_EN directly in its processing of the RX_DMA_CHAIN_END
event, but uses a flag variable card->rx_dma_restart_required
to schedule the setting of RX_DMA_EN until next inside the
interrupt handler.

It seems this delayed setting of RX_DMA_EN causes the hang since
the next RX interrupt after the RX_DMA_CHAIN_END event where
RX_DMA_EN is scheduled to be set will not occur since RX_DMA_EN
was not set.  In the case were network TX is occuring, RX_DMA_EN
is set in the next TX interrupt and RX processing continues.

Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agobnx2x: Multiple concurrent l2 traffic classes
Ariel Elior [Thu, 14 Jul 2011 08:31:57 +0000]
bnx2x: Multiple concurrent l2 traffic classes

Overview:
 Support mapping of priorities to traffic classes and
 traffic classes to transmission queues ranges in the net device.
 The queue ranges are (count, offset) pairs relating to the txq
 array.
 This can be done via DCBX negotiation or by kernel.
 As a result Enhanced Transmission Selection (ETS) and Priority Flow
 Control (PFC) are supported between L2 network traffic classes.

 Mapping:
 This patch uses the netdev_set_num_tc, netdev_set_prio_tc_map and
 netdev_set_tc_queue functions to map priorities to traffic classes
 and traffic classes to transmission queue ranges.
 This mapping is performed by bnx2x_setup_tc function which is
 connected to the ndo_setup_tc.
 This function is always called at nic load where by default it
 maps all priorities to tc 0, and it may also be called by the
 kernel or by the bnx2x upon DCBX negotiation to modify the mapping.

 rtnl lock:
 When the ndo_setup_tc is called at nic load or by kernel the rtnl
 lock is already taken. However, when DCBX negotiation takes place
 the lock is not taken. The work is therefore scheduled to be
 handled by the sp_rtnl task.

 Fastpath:
 The fastpath structure of the bnx2x which was previously used
 to hold the information of one tx queue and one rx queue was
 redesigned to represent multiple tx queues, one for each traffic
 class.
 The transmission queue supplied in the skb by the kernel can no
 longer be interpreted as a straightforward index into the fastpath
 structure array, but it must rather be decoded to the appropriate
 fastpath index and the tc within that fastpath.

 Slowpath:
 The bnx2x's queue object was redesigned to accommodate multiple
 transmission queues. The queue object's state machine was enhanced
 to allow opening multiple transmission-only connections on top of
 the regular tx-rx connection.

 Firmware:
 This feature relies on the tx-only queue feature introduced in the
 bnx2x 7.0.23 firmware and the FW likewise must have the bnx2x multi
 cos support.

Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>

Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agobnx2x: Renaming the "reset_task" to "sp_rtnl_task"
Ariel Elior [Thu, 14 Jul 2011 08:31:19 +0000]
bnx2x: Renaming the "reset_task" to "sp_rtnl_task"

Renaming the "reset_task" to a more general purpose name,
 "sp_rtnl_task", as it is already used for another purpose
 other than reset which is parity recovery, and since I
 plan to add a third operation for this task, updating the
 priority to traffic class and traffic class to transmission
 queues mappings after dcbx negotiation takes place.
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>

Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoMerge branch 'davem-next.r8169' of git://git.kernel.org/pub/scm/linux/kernel/git...
David S. Miller [Thu, 14 Jul 2011 22:59:38 +0000]
Merge branch 'davem-next.r8169' of git://git./linux/kernel/git/romieu/netdev-2.6

8 years agonet: remove SK_ROUTE_CAPS from meta ematch
Michał Mirosław [Thu, 14 Jul 2011 21:45:59 +0000]
net: remove SK_ROUTE_CAPS from meta ematch

Remove it, as it indirectly exposes netdev features. It's not used in
iproute2 (2.6.38) - is anything else using its interface?

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonet: remove /sys/class/net/*/features
Michał Mirosław [Thu, 14 Jul 2011 21:45:15 +0000]
net: remove /sys/class/net/*/features

The same information and more can be obtained by using ethtool
with ETHTOOL_GFEATURES.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonet: unexport netdev_fix_features()
Michał Mirosław [Wed, 13 Jul 2011 14:10:30 +0000]
net: unexport netdev_fix_features()

It is not used anywhere except net/core/dev.c now.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonet: cleanup vlan_features setting in register_netdev
Michał Mirosław [Thu, 14 Jul 2011 21:41:11 +0000]
net: cleanup vlan_features setting in register_netdev

vlan_features contains features inherited from underlying device.
NETIF_SOFT_FEATURES are not inherited but belong to the vlan device
itself (ensured in vlan_dev_fix_features()).

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonet: vlan: remove reduntant check in ndo_fix_features callback
Michał Mirosław [Thu, 14 Jul 2011 21:39:29 +0000]
net: vlan: remove reduntant check in ndo_fix_features callback

Use the fact that ORing with zero is a no-op.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonet: m68k/nfeth: Remove wrong usage of dev->flags
Michał Mirosław [Thu, 14 Jul 2011 21:38:17 +0000]
net: m68k/nfeth: Remove wrong usage of dev->flags

Remove wrong setting of dev->flags. NETIF_F_NO_CSUM maps to IFF_DEBUG
there, so looks like a mistake.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agor8169: adjust the RxConfig settings.
Hayes Wang [Wed, 6 Jul 2011 07:58:04 +0000]
r8169: adjust the RxConfig settings.

Set the init value before reset in probe function. And then just
modify the relative bits and keep the init settings.

For 8110S, 8110SB, and 8110SC series, the initial value of RxConfig
needs to be set after the tx/rx is enabled.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Acked-by: Francois Romieu <romieu@fr.zoreil.com>

8 years agor8169: don't enable rx when shutdown.
Hayes Wang [Wed, 6 Jul 2011 07:58:08 +0000]
r8169: don't enable rx when shutdown.

Only 8111b needs to enable rx when shutdowning with WoL.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Acked-by: Francois Romieu <romieu@fr.zoreil.com>

8 years agor8169: fix wake on lan setting for non-8111E.
Hayes Wang [Wed, 6 Jul 2011 07:58:07 +0000]
r8169: fix wake on lan setting for non-8111E.

Only 8111E needs enable RxConfig bit 0 ~ 3 when suspending or
shutdowning for wake on lan.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Acked-by: Francois Romieu <romieu@fr.zoreil.com>

8 years agor8169: support RTL8111E-VL.
Hayes Wang [Wed, 6 Jul 2011 07:58:06 +0000]
r8169: support RTL8111E-VL.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Acked-by: Francois Romieu <romieu@fr.zoreil.com>

8 years agor8169: add ERI functions.
Hayes Wang [Wed, 6 Jul 2011 07:58:05 +0000]
r8169: add ERI functions.

Add the ERI functions which would be used by the new chips.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Acked-by: Francois Romieu <romieu@fr.zoreil.com>

8 years agor8169: modify the flow of the hw reset.
Hayes Wang [Wed, 6 Jul 2011 07:58:03 +0000]
r8169: modify the flow of the hw reset.

- Disable tx and rx by resetting hw, so replace rtl8169_asic_down
  with rtl8169_hw_reset.
- RxConfig bits 0 ~ 5 have to be cleared before hw reset to avoid
  receiving spurious data.
- Certain chips need to do some checking before reset.
- Remove hw reset which is done before hw_start. It is done in close,
  down or device probe functions.
- Move rtl8169_init_ring_indexes function into rtl_hw_reset function.
  The indexes of tx and rx only need to be zero when the hw resets.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Acked-by: Francois Romieu <romieu@fr.zoreil.com>

8 years agor8169: adjust some registers.
Hayes Wang [Wed, 6 Jul 2011 07:58:02 +0000]
r8169: adjust some registers.

Define new registers and modify some existing ones.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Acked-by: Francois Romieu <romieu@fr.zoreil.com>

8 years agops3_gelic: Don't kill the device on DMA failure
Andre Heider [Tue, 12 Jul 2011 10:13:26 +0000]
ps3_gelic: Don't kill the device on DMA failure

Reset card->tx_dma_progress when lv1_net_start_tx_dma() fails or it
won't send anything afterwards anymore

Signed-off-by: Andre Heider <a.heider@gmail.com>
Acked-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agops3_gelic: Fix start_xmit kick error path
Andre Heider [Tue, 12 Jul 2011 10:13:25 +0000]
ps3_gelic: Fix start_xmit kick error path

Revert to a proper state when gelic_card_kick_txdma() fails:
- Don't trigger BUG_ON when releasing the unsent tx descriptor
- Reset the tx chain head since the tail was not modified and
  hence not in sync
- Unlink the released descriptor bus address from its predecessor

Signed-off-by: Andre Heider <a.heider@gmail.com>
Acked-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agops3_gelic: Fix typos
Andre Heider [Tue, 12 Jul 2011 10:13:24 +0000]
ps3_gelic: Fix typos

Signed-off-by: Andre Heider <a.heider@gmail.com>
Acked-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoqlcnic: change capture mask for FW dump
Anirban Chakraborty [Thu, 14 Jul 2011 03:16:55 +0000]
qlcnic: change capture mask for FW dump

o Change FW dump capture mask to a defult value, instead of using the recommended
  value from the FW. This was done to keep the capture mask consistent with other
  function drivers.

o Update driver version to 5.0.21

Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoqlcnic: define error code for loopback test
Amit Kumar Salecha [Thu, 14 Jul 2011 03:16:54 +0000]
qlcnic: define error code for loopback test

o Defined error code such as fw not responding, test already running and
  cable not connected.
o Check Fw capability before performing loopback test.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoqlcnic: fix race in skb->len access.
Sucheta Chakraborty [Thu, 14 Jul 2011 03:16:53 +0000]
qlcnic: fix race in skb->len access.

As soon as skb is given to hardware, TX completion can free skb under us.
Therefore, we should update dev stats before kicking the device.

Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoqlcnic: enable mac-learning in promiscous mode.
Sucheta Chakraborty [Thu, 14 Jul 2011 03:16:52 +0000]
qlcnic: enable mac-learning in promiscous mode.

MAC learning is required in bridge mode.
During bridge mode device will be put in promiscous mode.

Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoqlcnic: updated supported cards information
Sritej Velaga [Thu, 14 Jul 2011 03:16:51 +0000]
qlcnic: updated supported cards information

Added QME8242-k 10GbE Dual Port Mezzanine Card to supported card info.

Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoqlcnic: fix chip reset logic
Sritej Velaga [Thu, 14 Jul 2011 03:16:50 +0000]
qlcnic: fix chip reset logic

Chip reset logic (IDC logic) has changed with fw dump support.
This broked compatibility with driver using older IDC logic.
Changes to make it compatible with drivers using older IDC logic.

Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agobnx2: Read iSCSI config from shared memory during ->probe()
Michael Chan [Wed, 13 Jul 2011 17:24:22 +0000]
bnx2: Read iSCSI config from shared memory during ->probe()

The scratchpad location that we were reading from has not been
initialized yet during ->probe(), so we were getting inaccurate
information.

Update version to 2.1.10.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Reviewed-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agobnx2: Add MCP dump
Jeffrey Huang [Wed, 13 Jul 2011 17:24:21 +0000]
bnx2: Add MCP dump

to help debug issues related to management firmware.

Signed-off-by: Jeffrey Huang <huangjw@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Reviewed-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agocnic: Return proper error code if we fail to send netlink message
Michael Chan [Wed, 13 Jul 2011 17:24:20 +0000]
cnic: Return proper error code if we fail to send netlink message

to allow iSCSI connection to fail faster instead of waiting for the
long timeout.

Update version to 2.5.6.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Reviewed-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agocnic: Fix ring setup/shutdown code
Michael Chan [Wed, 13 Jul 2011 17:24:19 +0000]
cnic: Fix ring setup/shutdown code

Latest bnx2x driver uses different CID for the iSCSI rings, so
we need to pass it in the ring init data.  The rx ring is also
zeroed out to prevent stale DMA addresses from being used after
shutdown.

The same cp local variable redefined inside the else branch is
also eliminated.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agocnic: Fix port_mode setting
Michael Chan [Wed, 13 Jul 2011 17:24:18 +0000]
cnic: Fix port_mode setting

CHIP_2_PORT_MODE was not set correctly.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Reviewed-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agocnic: Replace get_random_bytes() with random32()
Michael Chan [Wed, 13 Jul 2011 17:24:17 +0000]
cnic: Replace get_random_bytes() with random32()

Suggested by Stephen Hemminger <shemminger@vyatta.com>

Signed-off-by: Michael Chan <mchan@broadcom.com>
Reviewed-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/bwh/sfc-next
David S. Miller [Thu, 14 Jul 2011 15:43:32 +0000]
Merge branch 'master' of git://git./linux/kernel/git/bwh/sfc-next

8 years agotg3: Match power source to driver state
Matt Carlson [Wed, 13 Jul 2011 09:27:33 +0000]
tg3: Match power source to driver state

Now that the driver state (and power source) is being more intensely
scrutinized, we need to make sure it is correct 100% of the time.  This
patch finds and fixes all dangling power state transitions.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agotg3: Add function status reporting
Matt Carlson [Wed, 13 Jul 2011 09:27:32 +0000]
tg3: Add function status reporting

This patch adds code to update the status of the function to a common
location to the critical section added in the previous patch.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agotg3: Create critical section around GPIO toggling
Matt Carlson [Wed, 13 Jul 2011 09:27:31 +0000]
tg3: Create critical section around GPIO toggling

The code that performs the power source switching will need to consider
the status of the other devices before making any switches.  The status
updates and power source switching will need to be an atomic operation,
so a critical section will be needed.  This patch establishes the
critical section through a CPMU mutex.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agotg3: Determine PCI function number in one place
Matt Carlson [Wed, 13 Jul 2011 09:27:30 +0000]
tg3: Determine PCI function number in one place

tg3 devices will need to know exactly what function number they are so
that they can communicate their status to the other functions.  In a KVM
environment, the function number of a device presented by the kernel
might not be the true function number, so an alternative method to
determine the function number is needed.

This patch used to contain an implementation for the alternative method,
but recently we discovered a hardware bug that renders it incorrect.
While new method is not yet known, it is still useful to consolidate the
code that determines the PCI function to one location and use the
results throughout the code.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agotg3: Check transitions to D0 power state
Matt Carlson [Wed, 13 Jul 2011 09:27:29 +0000]
tg3: Check transitions to D0 power state

Currently pci_set_power_state() does not return useful return codes for
transitions to the D0 power state.  If a device refuses to go into D0,
the PCI layer issues a warning but returns success.

Entering into D0 is a requirement for correct operation of tg3 devices
though.  If the PCI layer should be changed to return an error code for
this type of failure, the tg3 driver would be interested in catching it
and reacting to it.  This patch makes the necessary modifications.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agotg3: Move power state transitions to init_one
Matt Carlson [Wed, 13 Jul 2011 09:27:28 +0000]
tg3: Move power state transitions to init_one

The tg3 driver is going to require memory mapped register access much
sooner than before.  This patch makes sure the device is in the D0 power
state as soon as possible, and moves the code that enables the memory
arbiter outside tg3_get_eeprom_hw_cfg() where it can be more easily
monitored.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agotg3: Detect APE enabled devs earlier
Matt Carlson [Wed, 13 Jul 2011 09:27:27 +0000]
tg3: Detect APE enabled devs earlier

The following patch will require the driver to communicate with the APE
much sooner than before.  This patch make sure the APE registers are
memory mapped and that the ENABLE_APE bit is set before the first use.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoaf-packet: fix - avoid reading stale data
Chetan Loke [Thu, 14 Jul 2011 15:36:33 +0000]
af-packet: fix - avoid reading stale data

Currently we flush tp_status and then flush the remainder of the header+payload.
tp_status should be flushed in the end to avoid stale data being read by user-space.

Incorrectly re-ordered barriers in v1.

Signed-off-by: Chetan Loke <loke.chetan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoMerge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
David S. Miller [Thu, 14 Jul 2011 14:56:40 +0000]
Merge branch 'master' of /linux/kernel/git/davem/net-2.6

Conflicts:
net/bluetooth/l2cap_core.c

8 years agonet: Embed hh_cache inside of struct neighbour.
David S. Miller [Thu, 14 Jul 2011 14:53:20 +0000]
net: Embed hh_cache inside of struct neighbour.

Now that there is a one-to-one correspondance between neighbour
and hh_cache entries, we no longer need:

1) dynamic allocation
2) attachment to dst->hh
3) refcounting

Initialization of the hh_cache entry is indicated by hh_len
being non-zero, and such initialization is always done with
the neighbour's lock held as a writer.

Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc
Linus Torvalds [Wed, 13 Jul 2011 23:47:31 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/cjb/mmc

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc:
  mmc: core: Bus width testing needs to handle suspend/resume

8 years agosfc: Remove 'Communications' after 'Solarflare' in references to hardware
Ben Hutchings [Wed, 13 Jul 2011 15:21:24 +0000]
sfc: Remove 'Communications' after 'Solarflare' in references to hardware

Branding can now be abbreviated.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>

8 years agoMerge branch 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6
Linus Torvalds [Wed, 13 Jul 2011 21:34:08 +0000]
Merge branch 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6

* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
  SUNRPC: Fix use of static variable in rpcb_getport_async
  NFSv4.1: update nfs4_fattr_bitmap_maxsz
  SUNRPC: Fix a race between work-queue and rpc_killall_tasks
  pnfs: write: Set mds_offset in the generic layer - it is needed by all LDs

8 years agoMerge branch 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuil...
Linus Torvalds [Wed, 13 Jul 2011 21:16:53 +0000]
Merge branch 'rc-fixes' of git://git./linux/kernel/git/mmarek/kbuild-2.6

* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
  kbuild: Do not write to builddir in modules_install

8 years agoMerge branch 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied...
Linus Torvalds [Wed, 13 Jul 2011 21:04:26 +0000]
Merge branch 'drm-fixes' of git://git./linux/kernel/git/airlied/drm-2.6

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/radeon/kms/evergreen: emit SQ_LDS_RESOURCE_MGMT for blits
  agp/intel: Fix typo in G4x_GMCH_SIZE_VT_2M
  drm/radeon/kms: fix typo in read_disabled vbios code
  drm/radeon/kms: use correct BUS_CNTL reg on rs600
  drm/radeon/kms: fix backend map typo on juniper
  drm/radeon/kms: fix regression in hotplug

8 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Wed, 13 Jul 2011 20:51:32 +0000]
Merge git://git./linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (21 commits)
  slip: fix wrong SLIP6 ifdef-endif placing
  natsemi: fix another dma-debug report
  sctp: ABORT if receive, reassmbly, or reodering queue is not empty while closing socket
  net: Fix default in docs for tcp_orphan_retries.
  hso: fix a use after free condition
  net/natsemi: Fix module parameter permissions
  XFRM: Fix memory leak in xfrm_state_update
  sctp: Enforce retransmission limit during shutdown
  mac80211: fix TKIP replay vulnerability
  mac80211: fix ie memory allocation for scheduled scans
  ssb: fix init regression of hostmode PCI core
  rtlwifi: rtl8192cu: Add new USB ID for Netgear WNA1000M
  ath9k: Fix tx throughput drops for AR9003 chips with AES encryption
  carl9170: add NEC WL300NU-AG usbid
  cfg80211: fix deadlock with rfkill/sched_scan by adding new mutex
  ath5k: fix incorrect use of drvdata in PCI suspend/resume code
  ath5k: fix incorrect use of drvdata in sysfs code
  Bluetooth: Fix memory leak under page timeouts
  Bluetooth: Fix regression with incoming L2CAP connections
  Bluetooth: Fix hidp disconnect deadlocks and lost wakeup
  ...

8 years agommc: core: Bus width testing needs to handle suspend/resume
Philip Rakity [Thu, 7 Jul 2011 16:04:55 +0000]
mmc: core: Bus width testing needs to handle suspend/resume

On reading the ext_csd for the first time (in 1 bit mode), save the
ext_csd information needed for bus width compare.

On every pass we make re-reading the ext_csd, compare the data
against the saved ext_csd data.

This fixes a regression introduced in 3.0-rc1 by 08ee80cc397ac1a3
("mmc: core: eMMC bus width may not work on all platforms"), which
incorrectly assumed we would be re-reading the ext_csd at resume-
time.

Signed-off-by: Philip Rakity <prakity@marvell.com>
Tested-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

8 years agomac80211: allow driver to disconnect after resume
Johannes Berg [Tue, 12 Jul 2011 10:30:59 +0000]
mac80211: allow driver to disconnect after resume

In WoWLAN, devices may use crypto keys for TX/RX
and could also implement GTK rekeying. If the
driver isn't able to retrieve replay counters and
similar information from the device upon resume,
or if the device isn't responsive due to platform
issues, it isn't safe to keep the connection up
as GTK rekey messages from during the sleep time
could be replayed against it.

The only protection against that is disconnecting
from the AP. Modifying mac80211 to do that while
it is resuming would be very complex and invasive
in the case that the driver requires a reconfig,
so do it after it has resumed completely. In that
case, however, packets might be replayed since it
can then only happen after TX/RX are up again, so
mark keys for interfaces that need to disconnect
as "tainted" and drop all packets that are sent
or received with those keys.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agomac80211: remove a redundant check
Mohammed Shafi Shajakhan [Tue, 12 Jul 2011 09:49:04 +0000]
mac80211: remove a redundant check

is_valid_ether_addr itself checks for is_zero_ether_addr

Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agomwifiex: add cfg80211 handler for set_bitrate_mask
Yogesh Ashok Powar [Tue, 12 Jul 2011 03:04:44 +0000]
mwifiex: add cfg80211 handler for set_bitrate_mask

Currently, setting only legacy bitrates on 2.4GHz band
are supported. Mode 802.11b/g/bg is enabled based on
bitrates selection. If only CCK bitrates selected then
802.11b mode is enabled. If only OFDM bitrates are
selected then 802.11g mode is enabled. For both: CCK
and OFDM rates 802.11bg mixed mode is enabled.

Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agoath5k: do not call ieee80211_stop_queue for queues not managed by mac80211
Felix Fietkau [Tue, 12 Jul 2011 01:02:05 +0000]
ath5k: do not call ieee80211_stop_queue for queues not managed by mac80211

Instead of using ieee80211_stop_queue, check the configured tx queue
limit before calling ieee80211_get_buffered_bc.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agoath5k: disable 32KHz sleep clock operation by default
Felix Fietkau [Tue, 12 Jul 2011 01:02:04 +0000]
ath5k: disable 32KHz sleep clock operation by default

While 32 KHz sleep clock might provide some power saving benefits,
it is also a major source of stability issues, on OpenWrt it produced
some reproducible data bus errors on register accesses on several
different MIPS platforms.

All the Atheros drivers that I can find do not enable this feature,
so it makes sense to leave it disabled in ath5k as well.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Acked-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agoath5k: fix reference clock usec duration setting restore
Felix Fietkau [Tue, 12 Jul 2011 01:02:03 +0000]
ath5k: fix reference clock usec duration setting restore

enabling the sleep clock alters the AR5K_USEC_32 field, but disabling
it didn't restore it.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Acked-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agoath5k: delay full calibration after reset
Felix Fietkau [Tue, 12 Jul 2011 01:02:02 +0000]
ath5k: delay full calibration after reset

During scans the full calibration usually does not make much sense,
PAPD probing and IQ calibration should be deferred until there is
enough time to complete them. Adding 100 ms to the initial full
calibration delay should be enough to do this.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Acked-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agoath5k: initialize common->clockrate
Felix Fietkau [Tue, 12 Jul 2011 01:02:01 +0000]
ath5k: initialize common->clockrate

Fixes a division by zero when setting distance before activating the
device for the first time.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Acked-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agoath5k: fix reference clock frequency for spur mitigation on AR2413
Felix Fietkau [Tue, 12 Jul 2011 01:02:00 +0000]
ath5k: fix reference clock frequency for spur mitigation on AR2413

AR2413 uses the same reference clock as AR5413

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agoath5k: apply the synth voltage tweak only on AR5112 rev 2
Felix Fietkau [Tue, 12 Jul 2011 01:01:59 +0000]
ath5k: apply the synth voltage tweak only on AR5112 rev 2

Might fix some stability issues on newer chips

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Acked-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agoath5k: add missing checks for rfgain probe
Felix Fietkau [Tue, 12 Jul 2011 01:01:58 +0000]
ath5k: add missing checks for rfgain probe

rfgain probe is only necessary for OFDM operation on AR5111 and AR5112.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agoath9k_hw: Fix incorrect key_miss handling
Senthil Balasubramanian [Mon, 11 Jul 2011 18:32:56 +0000]
ath9k_hw: Fix incorrect key_miss handling

Decryping frames on key_miss handling shouldn't be done for Michael
MIC failed frames as h/w would have already decrypted such frames
successfully anyway.

Also leaving CRC and PHY error(where the frame is going to be dropped
anyway), we are left to prcoess Decrypt error for which s/w decrypt is
selected anway and so having key_miss as a separate check doesn't serve
anything. So making key_miss handling mutually exlusive with other RX
status handling makes much more sense.

This patch addresses an issue with STA not reporting MIC failure events
resulting in STA being disconnected immediately.

Cc: stable@kernel.org
Signed-off-by: Senthil Balasubramanian <senthilb@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agoiwlagn: Add missing comma between constant string array
Joe Perches [Sat, 9 Jul 2011 06:20:25 +0000]
iwlagn: Add missing comma between constant string array

Multiple quoted strings are concatenated without comma separators.

Make the array const while there.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agoiwlegacy: Add missing comma between constant string array
Joe Perches [Sat, 9 Jul 2011 06:20:24 +0000]
iwlegacy: Add missing comma between constant string array

Multiple quoted strings are concatenated without comma separators.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agosfc: Remove 'Solarstorm' from Kconfig descriptions
Ben Hutchings [Wed, 13 Jul 2011 15:10:02 +0000]
sfc: Remove 'Solarstorm' from Kconfig descriptions

The 'Solarstorm' brand is being retired and it's redundant with the
company name.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>

8 years agoslip: remove dead code within the slip initialization
Matvejchikov Ilya [Tue, 12 Jul 2011 21:47:38 +0000]
slip: remove dead code within the slip initialization

This following code contains a dead "if (dev).." block:
        ...
        for (i = 0; i < slip_maxdev; i++) {
                dev = slip_devs[i];
                if (dev == NULL)
                        break;
        }
        /* Sorry, too many, all slots in use */
        if (i >= slip_maxdev)
                return NULL;

        if (dev) {
                sl = netdev_priv(dev);
                if (test_bit(SLF_INUSE, &sl->flags)) {
                        unregister_netdevice(dev);
                        dev = NULL;
                        slip_devs[i] = NULL;
                }
         }
        ...
The reason is that the code starting with "if (dev).." is never called as
when we found an empty slot (dev == NULL) we break the loop and "if (dev).."
not works eiter the loop ends and we get out with "i >= slip_maxdev".

Signed-off-by: Matvejchikov Ilya <matvejchikov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoslip: remove redundant check slip_devs for NULL
Matvejchikov Ilya [Tue, 12 Jul 2011 21:46:57 +0000]
slip: remove redundant check slip_devs for NULL

As slip_devs is initialized on module load stage there is no reason to
check it for NULL anywhere instead of the deinitialization routine because
if we can't get enough memory on startup we don't run at all.

Signed-off-by: Matvejchikov Ilya <matvejchikov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoslip: fix MTU comparation operation when reallocating buffers
Matvejchikov Ilya [Tue, 12 Jul 2011 21:46:17 +0000]
slip: fix MTU comparation operation when reallocating buffers

In sl_realloc_bufs() there is no reason to check if the requested MTU greater
than or equal to the current MTU value as this function called only
when requested
MTU not equals to the current value. So, the ">=" operation can be
safely replaced
with the ">".

Signed-off-by: Matvejchikov Ilya <matvejchikov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoslip: remove redundant NULL-pointer check before calling slhc_free
Matvejchikov Ilya [Tue, 12 Jul 2011 21:45:37 +0000]
slip: remove redundant NULL-pointer check before calling slhc_free

Signed-off-by: Matvejchikov Ilya <matvejchikov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonet: Kill support for multiple hh_cache entries per neighbour
David S. Miller [Wed, 13 Jul 2011 07:51:10 +0000]
net: Kill support for multiple hh_cache entries per neighbour

This never, ever, happens.

Neighbour entries are always tied to one address family, and therefore
one set of dst_ops, and therefore one dst_ops->protocol "hh_type"
value.

This capability was blindly imported by Alexey Kuznetsov when he wrote
the neighbour layer.

Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonet: Push protocol type directly down to header_ops->cache()
David S. Miller [Wed, 13 Jul 2011 06:28:12 +0000]
net: Push protocol type directly down to header_ops->cache()

Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoipv4: Inline neigh binding.
David Miller [Mon, 11 Jul 2011 22:44:24 +0000]
ipv4: Inline neigh binding.

Get rid of all of the useless and costly indirection
by doing the neigh hash table lookup directly inside
of the neighbour binding.

Rename from arp_bind_neighbour to rt_bind_neighbour.

Use new helpers {__,}ipv4_neigh_lookup()

In rt_bind_neighbour() get rid of useless tests which
are never true in the context this function is called,
namely dev is never NULL and the dst->neighbour is
always NULL.

Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agodrm/radeon/kms/evergreen: emit SQ_LDS_RESOURCE_MGMT for blits
Alex Deucher [Tue, 12 Jul 2011 15:53:23 +0000]
drm/radeon/kms/evergreen: emit SQ_LDS_RESOURCE_MGMT for blits

Compute drivers may change this, so make sure to emit it to
avoid errors in bo blits.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=39119

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

8 years agoagp/intel: Fix typo in G4x_GMCH_SIZE_VT_2M
Chris Wilson [Tue, 12 Jul 2011 22:38:18 +0000]
agp/intel: Fix typo in G4x_GMCH_SIZE_VT_2M

Konstantin Belousov found an error in the define of G4x_GMCH_SIZE_VT_2M
relative to the GMCH specs, and confirmed that indeed one of his users
with a Q45 reports 0xb not 0xc for a 2/2MiB GATT.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Konstantin Belousov <kostikbel@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>

8 years agonet: Add documentation for netdev features handling
Michał Mirosław [Wed, 13 Jul 2011 05:27:00 +0000]
net: Add documentation for netdev features handling

v2: incorporated suggestions from Randy Dunlap

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agobe2net: move to new vlan model
Ajit Khaparde [Wed, 13 Jul 2011 05:10:01 +0000]
be2net: move to new vlan model

Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agobe2net: account for skb allocation failures
Eric Dumazet [Wed, 13 Jul 2011 05:09:18 +0000]
be2net: account for skb allocation failures

If we cannot allocate new skbs in RX completion handler, we should
increase netdevice rx_dropped counter, not spam console messages.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoe1000e: use GFP_KERNEL allocations at init time
Jeff Kirsher [Tue, 12 Jul 2011 16:10:12 +0000]
e1000e: use GFP_KERNEL allocations at init time

In process and sleep allowed context, favor GFP_KERNEL allocations over
GFP_ATOMIC ones.

-v2: fixed checkpatch.pl warnings

CC: Eric Dumazet <eric.dumazet@gmail.com>
CC: Ben Greear <greearb@candelatech.com>
CC: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoe1000e: Add Jumbo Frame support to 82583 devices
Carolyn Wyborny [Tue, 12 Jul 2011 16:10:11 +0000]
e1000e: Add Jumbo Frame support to 82583 devices

This patch adds support for the Jumbo Frames feature on 82583 devices.

Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com>
Tested-by:  Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoMerge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Linus Torvalds [Tue, 12 Jul 2011 21:21:19 +0000]
Merge branch 'merge' of git://git./linux/kernel/git/benh/powerpc

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc/mm: Fix memory_block_size_bytes() for non-pseries
  mm: Move definition of MIN_MEMORY_BLOCK_SIZE to a header

8 years agoMerge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc
Linus Torvalds [Tue, 12 Jul 2011 21:19:51 +0000]
Merge branch 'fixes' of git://git./linux/kernel/git/arm/linux-arm-soc

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc:
  pcmcia: pxa2xx/vpac270: free gpios on exist rather than requesting
  ARM: pxa/raumfeld: fix device name for codec ak4104
  ARM: pxa/raumfeld: display initialisation fixes
  ARM: pxa/raumfeld: adapt to upcoming hardware change
  ARM: pxa: fix gpio_to_chip() clash with gpiolib namespace
  genirq: replace irq_gc_ack() with {set,clr}_bit variants (fwd)
  arm: mach-vt8500: add forgotten irq_data conversion
  ARM: pxa168: correct nand pmu setting
  ARM: pxa910: correct nand pmu setting
  ARM: pxa: fix PGSR register address calculation