10 years agox86: Fix SSE opcode map bug
Masami Hiramatsu [Tue, 27 Oct 2009 20:42:04 +0000]
x86: Fix SSE opcode map bug

Fix superscripts position because some superscripts of SSE
opcode are not put in correct position.

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
LKML-Reference: <20091027204204.30545.97296.stgit@harusame>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agoperf probe: Print debug messages using pr_*()
Arnaldo Carvalho de Melo [Wed, 21 Oct 2009 19:34:06 +0000]
perf probe: Print debug messages using pr_*()

Use the new pr_{err,warning,debug,etc} printout methods, just
like in the kernel.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1256153646-10097-1-git-send-email-acme@redhat.com>
[ Split this patch out, to keep perf/probes separate. ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agoMerge branch 'perf/core' into perf/probes
Ingo Molnar [Fri, 23 Oct 2009 06:23:20 +0000]
Merge branch 'perf/core' into perf/probes

Conflicts:
tools/perf/Makefile

Merge reason:

 - fix the conflict
 - pick up the pr_*() infrastructure to queue up dependent patch

Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agoperf tools: Unify debug messages mechanisms
Arnaldo Carvalho de Melo [Wed, 21 Oct 2009 19:34:06 +0000]
perf tools: Unify debug messages mechanisms

We were using eprintf in some places, that looks at a global
'verbose' level, and at other places passing a 'v' parameter to
specify the verbosity level, unify it by introducing
pr_{err,warning,debug,etc}, just like in the kernel.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1256153646-10097-1-git-send-email-acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agoperf tools: Drop asm/types.h wrapper
Frederic Weisbecker [Thu, 22 Oct 2009 21:23:24 +0000]
perf tools: Drop asm/types.h wrapper

Wrapping the kernel headers is dangerous when it comes to arch
headers. Once we wrap asm/types.h, it will also replace the
glibc asm/types.h, not only the kernel one.

This results in build errors on some machines.

Drop this wrapper and do its work from linux/types.h wrapper,
also the glibc asm/types.h can already handle most of the type
definition it was doing (typedef __u64, __u32, etc...).

Todo: Check the others asm/*.h wrappers to prevent from other
conflicts.

Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Anton Blanchard <anton@samba.org>
LKML-Reference: <1256246604-17156-3-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agoperf tools: Bind callchains to the first sort dimension column
Frederic Weisbecker [Thu, 22 Oct 2009 21:23:23 +0000]
perf tools: Bind callchains to the first sort dimension column

Currently, the callchains are displayed using a constant left
margin. So depending on the current sort dimension
configuration, callchains may appear to be well attached to the
first sort dimension column field which is mostly the case,
except when the first dimension of sorting is done by comm,
because these are right aligned.

This patch binds the callchain to the first letter in the first
column, whatever type of column it is (dso, comm, symbol).
Before:

     0.80%             perf  [k] __lock_acquire
             __lock_acquire
             lock_acquire
             |
             |--58.33%-- _spin_lock
             |          |
             |          |--28.57%-- inotify_should_send_event
             |          |          fsnotify
             |          |          __fsnotify_parent

After:

     0.80%             perf  [k] __lock_acquire
                       __lock_acquire
                       lock_acquire
                       |
                       |--58.33%-- _spin_lock
                       |          |
                       |          |--28.57%-- inotify_should_send_event
                       |          |          fsnotify
                       |          |          __fsnotify_parent

Also, for clarity, we don't put anymore the callchain as is but:

- If we have a top level ancestor in the callchain, start it
  with a first ascii hook.

  Before:

     0.80%             perf  [kernel]                        [k] __lock_acquire
                       __lock_acquire
                         lock_acquire
                       |
                       |--58.33%-- _spin_lock
                       |          |
                       |          |--28.57%-- inotify_should_send_event
                       |          |          fsnotify
                      [..]       [..]

   After:

     0.80%             perf  [kernel]                         [k] __lock_acquire
                       |
                       --- __lock_acquire
                           lock_acquire
                          |
                          |--58.33%-- _spin_lock
                          |          |
                          |          |--28.57%-- inotify_should_send_event
                          |          |          fsnotify
                         [..]       [..]

- Otherwise, if we have several top level ancestors, then
  display these like we did before:

       1.69%           Xorg
                       |
                       |--21.21%-- vread_hpet
                       |          0x7fffd85b46fc
                       |          0x7fffd85b494d
                       |          0x7f4fafb4e54d
                       |
                       |--15.15%-- exaOffscreenAlloc
                       |
                       |--9.09%-- I830WaitLpRing

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Anton Blanchard <anton@samba.org>
LKML-Reference: <1256246604-17156-2-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agoperf tools: Fix missing top level callchain
Frederic Weisbecker [Thu, 22 Oct 2009 21:23:22 +0000]
perf tools: Fix missing top level callchain

While recursively printing the branches of each callchains, we
forget to display the root. It is never printed.

Say we have:

    symbol
    f1
    f2
     |
     -------- f3
     |        f4
     |
     ---------f5
              f6

Actually we never see that, instead it displays:

    symbol
    |
    --------- f3
    |         f4
    |
    --------- f5
              f6

However f1 is always the same than "symbol" and if we are
sorting by symbols first then "symbol", f1 and f2 will be well
aligned like in the above example, so displaying f1 looks
redundant here.

But if we are sorting by something else first (dso, comm,
etc...), displaying f1 doesn't look redundant but rather
necessary because the symbol is not well aligned anymore with
its callchain:

     comm     dso        symbol
     f1
     f2
     |
     --------- [...]

And we want the callchain to be obvious.
So we fix the bug by printing the root branch, but we also
filter its first entry if we are sorting by symbols first.

Reported-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1256246604-17156-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agox86, instruction decoder: Fix test_get_len build rules
Ingo Molnar [Wed, 21 Oct 2009 12:39:51 +0000]
x86, instruction decoder: Fix test_get_len build rules

Add the kernel source include file as well to the include files
search path, to fix this build bug:

 In file included from arch/x86/tools/test_get_len.c:28:
   arch/x86/lib/insn.c:21:26: error: linux/string.h: No such file or directory

Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: systemtap<systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20091020165531.4145.21872.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agoperf tools: Use strsep() over strtok_r() for parsing single line
Steven Rostedt [Tue, 20 Oct 2009 23:19:35 +0000]
perf tools: Use strsep() over strtok_r() for parsing single line

The second argument in the strtok_r() function is not to be used
generically and can have different implementations. Currently
the function parsing of the perf trace code uses the second
argument to copy data from. This can crash the tool or just have
unpredictable results.

The correct solution is to use strsep() which has a defined
result.

I also added a check to see if the result was correct, and will
break out of the loop in case it fails to parse as expected.

Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20091020232034.237814877@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agoperf tools: Add 'make DEBUG=1' to remove the -O6 cflag
Steven Rostedt [Tue, 20 Oct 2009 23:19:34 +0000]
perf tools: Add 'make DEBUG=1' to remove the -O6 cflag

When using gdb to debug perf, it is practically impossible to
use when perf is compiled with -O6. For developers, this patch
adds the DEBUG feature to the make command line so that a
developer can easily remove the optimization flag.

LKML-Reference: <1255590330.8392.446.camel@twins>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091020232033.984323261@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agox86: Add AES opcodes to opcode map
Masami Hiramatsu [Tue, 20 Oct 2009 16:55:31 +0000]
x86: Add AES opcodes to opcode map

Add Intel AES opcodes to x86 opcode map. These opcodes are
used in arch/x86/crypt/aesni-intel_asm.S.

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: systemtap<systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20091020165531.4145.21872.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agox86: Fix group attribute decoding bug
Masami Hiramatsu [Tue, 20 Oct 2009 16:55:24 +0000]
x86: Fix group attribute decoding bug

Fix a typo in inat_get_group_attribute() which should refer
inat_group_tables, not inat_escape_tables.

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: systemtap<systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20091020165524.4145.97333.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agoperf top: Fix symbol annotation
Arnaldo Carvalho de Melo [Tue, 20 Oct 2009 17:54:55 +0000]
perf top: Fix symbol annotation

We need to use map->unmap_ip() here too to match section
relative symbol address to the absolute address needed to match
objdump -dS addresses.

Reported-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1256061295-19835-1-git-send-email-acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agoperf annotate: Remove requirement of passing a symbol name
Arnaldo Carvalho de Melo [Tue, 20 Oct 2009 17:08:29 +0000]
perf annotate: Remove requirement of passing a symbol name

If the user doesn't pass a symbol name to annotate, it will
annotate all the symbols that have hits, in order, just like
'perf report -s comm,dso,symbol'.

This is a natural followup patch to the one that uses
output_hists to find the symbols with hits.

The common case is to annotate the first few entries at the top
of a perf report, so lets type less characters.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1256058509-19678-1-git-send-email-acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agoperf annotate: Use the sym_priv_size area for the histogram
Arnaldo Carvalho de Melo [Tue, 20 Oct 2009 16:25:40 +0000]
perf annotate: Use the sym_priv_size area for the histogram

We have this sym_priv_size mechanism for attaching private areas
to struct symbol entries but annotate wasn't using it, adding
private areas to struct symbol in addition to a ->priv pointer.

Scrap all that and use the sym_priv_size mechanism.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1256055940-19511-1-git-send-email-acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agoperf tools: Add ->unmap_ip operation to struct map
Arnaldo Carvalho de Melo [Mon, 19 Oct 2009 19:17:57 +0000]
perf tools: Add ->unmap_ip operation to struct map

We need this because we get section relative addresses when
reading the symtabs, but when a tool like 'perf annotate' needs
to match these address to what 'objdump -dS' produces we need
the address + section back again.

So in annotate now we look at the 'struct hist_entry' instances
(that weren't really being used) so that we iterate only over
the symbols that had some hit and get the map where that
particular hit happened so that we can get the right address to
match with annotate.

Verified that at least:

 perf annotate mmap_read_counter # Uses the ~/bin/perf binary
 perf annotate --vmlinux /home/acme/git/build/perf/vmlinux intel_pmu_enable_all

on a 'perf record perf top' session seems to work.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1255979877-12533-1-git-send-email-acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agoperf timechart: Add a process filter
Arjan van de Ven [Mon, 19 Oct 2009 22:09:39 +0000]
perf timechart: Add a process filter

During the Kernel Summit demo of perf/ftrace/timechart, there
was a feature request to have a process filter for timechart so
that you can zoom into one or a few processes that you are
really interested in.

This patch adds basic support for this feature, the -p
(--process) option now can select a PID or a process name to be
shown. Multiple -p options are allowed, and the combined set
will be included in the output.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20091020070939.7d0fb8a7@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agoMerge branch 'perf/urgent' into perf/core
Ingo Molnar [Tue, 20 Oct 2009 05:51:41 +0000]
Merge branch 'perf/urgent' into perf/core

Merge reason: Queue up dependent patch.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agoperf timechart: Improve the visual appearance of scheduler delays
Arjan van de Ven [Mon, 19 Oct 2009 21:47:31 +0000]
perf timechart: Improve the visual appearance of scheduler delays

[from KS feedback]

Currently, scheduler delays are shown in a mostly transparent,
light yellow color. This color is rather hard to see on several
screens, especially projectors.

This patch changes the color of the scheduler delays to be a
much more "hard" yellow that survived the kernel summit
projector.

Reported-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20091020064731.20ae126a@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agoperf timechart: Fix the wakeup-arrows that point to non-visible processes
Arjan van de Ven [Mon, 19 Oct 2009 21:46:49 +0000]
perf timechart: Fix the wakeup-arrows that point to non-visible processes

The timechart wakeup arrows currently show no process
information when the waker/wakee are processes that are not
actually chosen to be shown on the timechart.

This patch fixes this oversight, by looking through all
processes (after giving preference to visible processes) as well
as falling back to just showing the PID if no name for the
process can be resolved.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20091020064649.0e4959b2@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agoperf tools: Add bunch of missing headers to LIB_H
Arnaldo Carvalho de Melo [Mon, 19 Oct 2009 17:31:31 +0000]
perf tools: Add bunch of missing headers to LIB_H

Build dependencies were not properly mapped out.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1255973491-11626-1-git-send-email-acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agoperf tools: Add missing tools/perf/util/include/string.h
Arnaldo Carvalho de Melo [Mon, 19 Oct 2009 17:11:36 +0000]
perf tools: Add missing tools/perf/util/include/string.h

To cure a bunch of:

In file included from util/include/linux/bitmap.h:1,
                 from util/header.h:8,
                 from builtin-trace.c:7:
util/include/../../../../include/linux/bitmap.h:8:26: error:
linux/string.h: No such file or directory make: ***
[builtin-trace.o] Error 1 make: *** Waiting for unfinished
jobs....

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1255972296-11500-1-git-send-email-acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agoperf stat: Count branches first
Ingo Molnar [Mon, 19 Oct 2009 11:33:03 +0000]
perf stat: Count branches first

Count branches first, cache-misses second. The reason is that
on x86 branches are not counted by all counters on all CPUs.

Before:

 Performance counter stats for 'ls':

       0.756653  task-clock-msecs         #      0.802 CPUs
              0  context-switches         #      0.000 M/sec
              0  CPU-migrations           #      0.000 M/sec
            250  page-faults              #      0.330 M/sec
        2375725  cycles                   #   3139.781 M/sec
        1628129  instructions             #      0.685 IPC
          19643  cache-references         #     25.960 M/sec
           4608  cache-misses             #      6.090 M/sec
         342532  branches                 #    452.694 M/sec
  <not counted>  branch-misses

    0.000943356  seconds time elapsed

After:

 Performance counter stats for 'ls':

       1.056734  task-clock-msecs         #      0.859 CPUs
              0  context-switches         #      0.000 M/sec
              0  CPU-migrations           #      0.000 M/sec
            259  page-faults              #      0.245 M/sec
        3345932  cycles                   #   3166.295 M/sec
        3074090  instructions             #      0.919 IPC
         616928  branches                 #    583.806 M/sec
          39279  branch-misses            #      6.367 %
          21312  cache-references         #     20.168 M/sec
           3661  cache-misses             #      3.464 M/sec

    0.001230551  seconds time elapsed

(also prettify the printout of branch misses, in case it's
 getting scaled.)

Cc: Tim Blechmann <tim@klingt.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4ADC3975.8050109@klingt.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 tools/perf/builtin-stat.c |    2 ++
 1 files changed, 2 insertions(+), 0 deletions(-)

diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c
index c373683..95a55ea 100644
--- a/tools/perf/builtin-stat.c
+++ b/tools/perf/builtin-stat.c
@@ -59,6 +59,8 @@ static struct perf_event_attr default_attrs[] = {
   { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_INSTRUCTIONS },
   { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CACHE_REFERENCES},
   { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CACHE_MISSES },
+  { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_BRANCH_INSTRUCTIONS},
+  { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_BRANCH_MISSES },

 };
---
 tools/perf/builtin-stat.c |   20 ++++++++++----------
 1 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c
index 95a55ea..90e0a26 100644
--- a/tools/perf/builtin-stat.c
+++ b/tools/perf/builtin-stat.c
@@ -50,17 +50,17 @@

 static struct perf_event_attr default_attrs[] = {

-  { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_TASK_CLOCK },
-  { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_CONTEXT_SWITCHES},
-  { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_CPU_MIGRATIONS },
-  { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_PAGE_FAULTS },
-
-  { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CPU_CYCLES },
-  { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_INSTRUCTIONS },
-  { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CACHE_REFERENCES},
-  { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CACHE_MISSES },
-  { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_BRANCH_INSTRUCTIONS},
-  { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_BRANCH_MISSES },
+  { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_TASK_CLOCK },
+  { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_CONTEXT_SWITCHES },
+  { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_CPU_MIGRATIONS },
+  { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_PAGE_FAULTS },
+
+  { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CPU_CYCLES },
+  { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_INSTRUCTIONS },
+  { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CACHE_REFERENCES },
+  { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CACHE_MISSES },
+  { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_BRANCH_INSTRUCTIONS },
+  { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_BRANCH_MISSES },

 };

10 years agoperf stat: Re-align the default_attrs[] array
Ingo Molnar [Mon, 19 Oct 2009 11:27:08 +0000]
perf stat: Re-align the default_attrs[] array

Clean up the array definition to be vertically aligned.

No functional effects.

Cc: Tim Blechmann <tim@klingt.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4ADC3975.8050109@klingt.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 tools/perf/builtin-stat.c |    2 ++
 1 files changed, 2 insertions(+), 0 deletions(-)

diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c
index c373683..95a55ea 100644
--- a/tools/perf/builtin-stat.c
+++ b/tools/perf/builtin-stat.c
@@ -59,6 +59,8 @@ static struct perf_event_attr default_attrs[] = {
   { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_INSTRUCTIONS },
   { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CACHE_REFERENCES},
   { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CACHE_MISSES },
+  { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_BRANCH_INSTRUCTIONS},
+  { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_BRANCH_MISSES },

 };

10 years agoperf stat: Add branch performance events to default output
Tim Blechmann [Mon, 19 Oct 2009 10:03:33 +0000]
perf stat: Add branch performance events to default output

Adds performance event information about branches
and branch misses to the default output of perf stat.

Signed-off-by: Tim Blechmann <tim@klingt.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4ADC3975.8050109@klingt.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agoperf tools: Display better error messages on missing packages
Randy Dunlap [Mon, 19 Oct 2009 02:20:24 +0000]
perf tools: Display better error messages on missing packages

Check for libelf headers and glibc headers separately so that
the error message correctly identifies which package
installation is missing/needed.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: paulus@samba.org
Cc: a.p.zijlstra@chello.nl
Cc: efault@gmx.de
Cc: fweisbec@gmail.com
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <4ADBCCE8.3060300@oracle.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agoperf top: Fix --delay_secs 0 division by zero
Tim Blechmann [Sat, 17 Oct 2009 16:08:29 +0000]
perf top: Fix --delay_secs 0 division by zero

Add delay_secs sanity check to handle_keypress,
this fixes a division by zero crash.

Signed-off-by: Tim Blechmann <tim@klingt.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4AD9EBFD.106@klingt.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agoperf tools: Use DECLARE_BITMAP instead of an open-coded array
Frederic Weisbecker [Sat, 17 Oct 2009 15:57:18 +0000]
perf tools: Use DECLARE_BITMAP instead of an open-coded array

Use DECLARE_BITMAP instead of an open coded array for our bitmap
of featured sections.

This makes the array an unsigned long instead of a u64 but since
we use a 256 bits bitmap, the array size shouldn't vary between
different boxes.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1255795038-13751-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agoperf tools: Introduce bitmask'ed additional headers
Frederic Weisbecker [Sat, 17 Oct 2009 15:12:34 +0000]
perf tools: Introduce bitmask'ed additional headers

This provides a new set of bitmasked headers. A new field is
added in the perf headers that implements a bitmap storing
optional features present in the perf.data file.

The layout can be pictured like this:

(Usual perf headers)(Features bitmap)[Feature 0][Feature
n][Feature 255]

If the bit n is set, then the feature n is used in this file.
They are all set in order. This brings a backward and forward
compatibility.

The trace_info section has moved into such optional features,
this is the first and only one for now.

This is backward compatible with the .32 file version although
it doesn't support the previous separate trace.info file.

And finally it doesn't support the current interim development
version.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1255792354-11304-2-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agoperf tools: Use kernel bitmap library
Frederic Weisbecker [Sat, 17 Oct 2009 15:12:33 +0000]
perf tools: Use kernel bitmap library

Use the kernel bitmap library for internal perf tools uses.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1255792354-11304-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agoperf stat: Add branch performance metric
Anton Blanchard [Sun, 18 Oct 2009 11:29:23 +0000]
perf stat: Add branch performance metric

When we count both branches and branch-misses it is useful to
print out the percentage of branch-misses:

 # perf stat -e branches -e branch-misses /bin/true

 Performance counter stats for '/bin/true':

         401684  branches                 #      0.000 M/sec
          23301  branch-misses            #      5.801 %

Signed-off-by: Anton Blanchard <anton@samba.org>
Cc: paulus@samba.org
Cc: a.p.zijlstra@chello.nl
LKML-Reference: <20091018112923.GQ4808@kryten>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agoMerge commit 'v2.6.32-rc5' into perf/probes
Ingo Molnar [Sat, 17 Oct 2009 07:58:25 +0000]
Merge commit 'v2.6.32-rc5' into perf/probes

Conflicts:
kernel/trace/trace_event_profile.c

Merge reason: update to -rc5 and resolve conflict.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agoperf: Add perf-probe document
Masami Hiramatsu [Sat, 17 Oct 2009 00:08:27 +0000]
perf: Add perf-probe document

Add perf-probe subcommand document and add it to command-list.

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20091017000827.16556.73539.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agoperf: Add DIE_IF() macro for error checking
Masami Hiramatsu [Sat, 17 Oct 2009 00:08:18 +0000]
perf: Add DIE_IF() macro for error checking

Add DIE_IF() macro and replace ERR_IF() with it, and use
linux/stringify.h.

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20091017000818.16556.82452.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agoperf: Use eprintf() for debug messages in perf-probe
Masami Hiramatsu [Sat, 17 Oct 2009 00:08:10 +0000]
perf: Use eprintf() for debug messages in perf-probe

Replace debug() macro with eprintf() and add -v option for
showing those messages in perf-probe.

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20091017000810.16556.38013.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agoperf: Use die() for error cases in perf-probe
Masami Hiramatsu [Sat, 17 Oct 2009 00:08:01 +0000]
perf: Use die() for error cases in perf-probe

Use die() for exiting perf-probe with errors. This replaces
perror_exit(), msg_exit() and fprintf()+exit() with die(), and
uses die() in semantic_error().

This also renames 'die' local variables to 'dw_die' for avoiding
name confliction.

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20091017000801.16556.46866.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agoperf: Check libdwarf APIs for perf probe
Masami Hiramatsu [Sat, 17 Oct 2009 00:07:52 +0000]
perf: Check libdwarf APIs for perf probe

Check libdwarf APIs for perf probe in tools/perf/Makefile. Since
dwarf_get_ranges() has been added from libdwarf 20081231 (and
it's the newest function used in probe-finder.c), this just
checks whether the function is defined.

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20091017000752.16556.92051.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agox86: Add AMD prefetch and 3DNow! opcodes to opcode map
Masami Hiramatsu [Sat, 17 Oct 2009 00:07:44 +0000]
x86: Add AMD prefetch and 3DNow! opcodes to opcode map

Add AMD prefetch and 3DNow! opcode including FEMMS. Since 3DNow!
uses the last immediate byte as an opcode extension byte, x86
insn just treats the extenstion byte as an immediate byte
instead of a part of opcode (insn_get_opcode() decodes first
"0x0f 0x0f" bytes.)

Users who are interested in analyzing 3DNow! opcode still can
decode it by analyzing the immediate byte.

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20091017000744.16556.27881.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agox86: Add MMX/SSE opcode groups to opcode map
Masami Hiramatsu [Sat, 17 Oct 2009 00:07:36 +0000]
x86: Add MMX/SSE opcode groups to opcode map

Add missing MMX/SSE opcode groups to x86 opcode map.

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20091017000736.16556.29061.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agotracing/kprobes: Add failure messages for debugging
Masami Hiramatsu [Sat, 17 Oct 2009 00:07:28 +0000]
tracing/kprobes: Add failure messages for debugging

Add verbose failure messages to kprobe-tracer for debugging.

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20091017000728.16556.16713.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agotracing/kprobes: Update kprobe-tracer selftest against new syntax
Masami Hiramatsu [Sat, 17 Oct 2009 00:07:20 +0000]
tracing/kprobes: Update kprobe-tracer selftest against new syntax

Update kprobe-tracer selftest since command syntax has been
changed.

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20091017000720.16556.26343.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agoperf tools: Move dereference after NULL test
Julia Lawall [Sat, 17 Oct 2009 06:43:17 +0000]
perf tools: Move dereference after NULL test

In each case, if the NULL test on thread is needed, then the
dereference should be after the NULL test.

A simplified version of the semantic match that detects this
problem is as follows (http://coccinelle.lip6.fr/):

// <smpl>
@match exists@
expression x, E;
identifier fld;
@@

* x->fld
  ... when != \(x = E\|&x\)
* x == NULL
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
LKML-Reference: <Pine.LNX.4.64.0910170842500.9213@ask.diku.dk>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agoperf tools: Bump version to 0.0.2
Ingo Molnar [Fri, 16 Oct 2009 08:34:28 +0000]
perf tools: Bump version to 0.0.2

We released the first version of perf with 0.0.1 in v2.6.31,
time to double our version number to 0.0.2 ;-)

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agoLinux 2.6.32-rc5
Linus Torvalds [Fri, 16 Oct 2009 00:41:50 +0000]
Linux 2.6.32-rc5

10 years agoMerge branch 'docs-next' of git://git.lwn.net/linux-2.6
Linus Torvalds [Thu, 15 Oct 2009 22:21:42 +0000]
Merge branch 'docs-next' of git://git.lwn.net/linux-2.6

* 'docs-next' of git://git.lwn.net/linux-2.6:
  Update flex_arrays.txt

10 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm
Linus Torvalds [Thu, 15 Oct 2009 22:21:20 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/teigland/dlm

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm:
  dlm: fix socket fd translation
  dlm: fix lowcomms_connect_node for sctp

10 years agoMerge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Thu, 15 Oct 2009 22:20:17 +0000]
Merge branch 'x86-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  Revert "x86: linker script syntax nits"
  x86, perf_event: Rename 'performance counter interrupt'

10 years agoKEYS: get_instantiation_keyring() should inc the keyring refcount in all cases
David Howells [Thu, 15 Oct 2009 09:14:35 +0000]
KEYS: get_instantiation_keyring() should inc the keyring refcount in all cases

The destination keyring specified to request_key() and co. is made available to
the process that instantiates the key (the slave process started by
/sbin/request-key typically).  This is passed in the request_key_auth struct as
the dest_keyring member.

keyctl_instantiate_key and keyctl_negate_key() call get_instantiation_keyring()
to get the keyring to attach the newly constructed key to at the end of
instantiation.  This may be given a specific keyring into which a link will be
made later, or it may be asked to find the keyring passed to request_key().  In
the former case, it returns a keyring with the refcount incremented by
lookup_user_key(); in the latter case, it returns the keyring from the
request_key_auth struct - and does _not_ increment the refcount.

The latter case will eventually result in an oops when the keyring prematurely
runs out of references and gets destroyed.  The effect may take some time to
show up as the key is destroyed lazily.

To fix this, the keyring returned by get_instantiation_keyring() must always
have its refcount incremented, no matter where it comes from.

This can be tested by setting /etc/request-key.conf to:

#OP TYPE DESCRIPTION CALLOUT INFO PROGRAM ARG1 ARG2 ARG3 ...
#====== ======= =============== =============== ===============================
create  * test:* * |/bin/false %u %g %d %{user:_display}
negate * * * /bin/keyctl negate %k 10 @u

and then doing:

keyctl add user _display aaaaaaaa @u
        while keyctl request2 user test:x test:x @u &&
        keyctl list @u;
        do
                keyctl request2 user test:x test:x @u;
                sleep 31;
                keyctl list @u;
        done

which will oops eventually.  Changing the negate line to have @u rather than
%S at the end is important as that forces the latter case by passing a special
keyring ID rather than an actual keyring ID.

Reported-by: Alexander Zangerl <az@bond.edu.au>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Alexander Zangerl <az@bond.edu.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoMerge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Linus Torvalds [Thu, 15 Oct 2009 22:15:03 +0000]
Merge branch 'merge' of git://git./linux/kernel/git/benh/powerpc

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc/pci: Fix MODPOST warning
  powerpc/oprofile: Add ppc750 CL as supported by oprofile
  powerpc: warning: allocated section `.data_nosave' not in segment
  powerpc/kgdb: Fix build failure caused by "kgdb.c: unused variable 'acc'"
  powerpc: Fix hypervisor TLB batching
  powerpc/mm: Fix hang accessing top of vmalloc space
  powerpc: Fix memory leak in axon_msi.c
  powerpc/pmac: Fix issues with sleep on some powerbooks
  powerpc64/ftrace: use PACA to retrieve TOC in mod_return_to_handler
  powerpc/ftrace: show real return addresses in modules

10 years agoMerge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux...
Linus Torvalds [Thu, 15 Oct 2009 22:10:27 +0000]
Merge branch 'release' of git://git./linux/kernel/git/lenb/linux-acpi-2.6

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  ACPI button: don't try to use a non-existent lid device
  ACPI: video: Loosen strictness of video bus detection code
  eeepc-laptop: Prevent a panic when disabling RT2860 wireless when associated
  eeepc-laptop: Properly annote eeepc_enable_camera().
  ACPI / PCI: Fix NULL pointer dereference in acpi_get_pci_dev() (rev. 2)
  fujitsu-laptop: address missed led-class ifdef fixup
  ACPI: Kconfig, fix proc aggregator text
  ACPI: add AC/DC notifier

10 years agoMerge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Thu, 15 Oct 2009 22:09:55 +0000]
Merge branch 'omap-fixes-for-linus' of git://git./linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6:
  OMAP2xxx clock: set up clockdomain pointer in struct clk
  OMAP: Fix race condition with autodeps
  omap: McBSP: Fix incorrect receiver stop in omap_mcbsp_stop
  omap: Initialization of SDRC params on Zoom2
  omap: RX-51: Drop I2C-1 speed to 2200
  omap: SDMA: Fixing bug in omap_dma_set_global_params()
  omap: CONFIG_ISP1301_OMAP redefined in Beagle defconfig

10 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs...
Linus Torvalds [Thu, 15 Oct 2009 22:06:37 +0000]
Merge branch 'master' of git://git./linux/kernel/git/mason/btrfs-unstable

* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
  Btrfs: always pin metadata in discard mode
  Btrfs: enable discard support
  Btrfs: add -o discard option
  Btrfs: properly wait log writers during log sync
  Btrfs: fix possible ENOSPC problems with truncate
  Btrfs: fix btrfs acl #ifdef checks
  Btrfs: streamline tree-log btree block writeout
  Btrfs: avoid tree log commit when there are no changes
  Btrfs: only write one super copy during fsync

10 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6
Linus Torvalds [Thu, 15 Oct 2009 22:06:02 +0000]
Merge git://git./linux/kernel/git/gregkh/tty-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6:
  tty: fix vt_compat_ioctl

10 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6
Linus Torvalds [Thu, 15 Oct 2009 22:05:46 +0000]
Merge git://git./linux/kernel/git/gregkh/driver-core-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6:
  sysfs: Allow sysfs_notify_dirent to be called from interrupt context.
  sysfs: Allow sysfs_move_dir(..., NULL) again.

10 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6
Linus Torvalds [Thu, 15 Oct 2009 22:05:33 +0000]
Merge git://git./linux/kernel/git/gregkh/usb-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  USB: gadget: Fix EEM driver comments and VID/PID
  usb-storage: Workaround devices with bogus sense size
  USB: ehci: Fix IST boundary checking interval math.
  USB: option: Support for AIRPLUS MCD650 Datacard
  USB: whci-hcd: always do an update after processing a halted qTD
  USB: whci-hcd: handle early deletion of endpoints
  USB: wusb: don't use the stack to read security descriptor
  USB: rename Documentation/ABI/.../sysfs-class-usb_host

10 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6
Linus Torvalds [Thu, 15 Oct 2009 22:05:20 +0000]
Merge git://git./linux/kernel/git/gregkh/staging-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6:
  Staging: rt2860sta: prevent a panic when disabling when associated
  staging: more sched.h fixes
  Staging: et131x: Fix the add_10bit macro
  Staging: et131x: Correct WRAP bit handling
  staging: Complete sched.h removal from interrupt.h
  Staging: vme: fix sched.h build breakage
  Staging: poch: fix sched.h build breakage
  Staging: b3dfg: fix sched.h build breakage
  Staging: comedi: fix sched.h build breakage
  Staging: iio: Fix missing include <linux/sched.h>

10 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Thu, 15 Oct 2009 22:03:17 +0000]
Merge git://git./linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (53 commits)
  vmxnet: fix 2 build problems
  net: add support for STMicroelectronics Ethernet controllers.
  net: ks8851_mll uses mii interfaces
  net/fec_mpc52xx: Fix kernel panic on FEC error
  net: Fix OF platform drivers coldplug/hotplug when compiled as modules
  TI DaVinci EMAC: Clear statistics register properly.
  r8169: partial support and phy init for the 8168d
  irda/sa1100_ir: check return value of startup hook
  udp: Fix udp_poll() and ioctl()
  WAN: fix Cisco HDLC handshaking.
  tcp: fix tcp_defer_accept to consider the timeout
  3c574_cs: spin_lock the set_multicast_list function
  net: Teach pegasus driver to ignore bluetoother adapters with clashing Vendor:Product IDs
  netxen: fix pci bar mapping
  ethoc: fix warning from 32bit build
  libertas: fix build
  net: VMware virtual Ethernet NIC driver: vmxnet3
  net: Fix IXP 2000 network driver building.
  libertas: fix build
  mac80211: document ieee80211_rx() context requirement
  ...

10 years agoMerge the right tty-fixes branch
Linus Torvalds [Thu, 15 Oct 2009 21:59:24 +0000]
Merge the right tty-fixes branch

* branch 'tty-fixes'
  tty: use the new 'flush_delayed_work()' helper to do ldisc flush
  workqueue: add 'flush_delayed_work()' to run and wait for delayed work
  tty: Make flush_to_ldisc() locking more robust

10 years agoUpdate flex_arrays.txt
Jonathan Corbet [Wed, 14 Oct 2009 18:43:22 +0000]
Update flex_arrays.txt

The 2.6.32 merge window brought a number of changes to the flexible array
API; this patch updates the documentation to match the new state of
affairs.

Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

10 years agoevents: Harmonize event field names and print output names
Ingo Molnar [Thu, 15 Oct 2009 09:50:39 +0000]
events: Harmonize event field names and print output names

Now that we can filter based on fields via perf record, people
will start using filter expressions and will expect them to
be obvious.

The primary way to see which fields are available is by looking
at the trace output, such as:

  gcc-18676 [000]   343.011728: irq_handler_entry: irq=0 handler=timer
  cc1-18677 [000]   343.012727: irq_handler_entry: irq=0 handler=timer
  cc1-18677 [000]   343.032692: irq_handler_entry: irq=0 handler=timer
  cc1-18677 [000]   343.033690: irq_handler_entry: irq=0 handler=timer
  cc1-18677 [000]   343.034687: irq_handler_entry: irq=0 handler=timer
  cc1-18677 [000]   343.035686: irq_handler_entry: irq=0 handler=timer
  cc1-18677 [000]   343.036684: irq_handler_entry: irq=0 handler=timer

While 'irq==0' filters work, the 'handler==<x>' filter expression
does not work:

  $ perf record -R -f -a -e irq:irq_handler_entry --filter handler=timer sleep 1
   Error: failed to set filter with 22 (Invalid argument)

The problem is that while an 'irq' field exists and is recognized
as a filter field - 'handler' does not exist - its name is 'name'
in the output.

To solve this, we need to synchronize the printout and the field
names, wherever possible.

In cases where the printout prints a non-field, we enclose
that information in square brackets, such as:

  perf-1380  [013]   724.903505: softirq_exit: vec=9 [action=RCU]
  perf-1380  [013]   724.904482: softirq_exit: vec=1 [action=TIMER]

This way users can use filter expressions more intuitively: all
fields that show up as 'primary' (non-bracketed) information is
filterable.

This patch harmonizes the field names for all irq, bkl, power,
sched and timer events.

We might in fact think about dropping the print format bit of
generic tracepoints altogether, and just print the fields that
are being recorded.

Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agotracing/events: Fix locking imbalance in the filter code
Ingo Molnar [Thu, 15 Oct 2009 10:24:04 +0000]
tracing/events: Fix locking imbalance in the filter code

Américo Wang noticed that we have a locking imbalance in the
error paths of ftrace_profile_set_filter(), causing potential
leakage of event_mutex.

Also clean up other error codepaths related to event_mutex
while at it.

Plus fix an initialized variable in the subsystem filter code.

Reported-by: Américo Wang <xiyou.wangcong@gmail.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <2375c9f90910150247u5ccb8e2at58c764e385ffa490@mail.gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agoperf trace: Add filter Suppport
Li Zefan [Thu, 15 Oct 2009 03:22:07 +0000]
perf trace: Add filter Suppport

Add a new option "--filter <filter_str>" to perf record, and
it should be right after "-e trace_point":

 #./perf record -R -f -e irq:irq_handler_entry --filter irq==18
 ^C
 # ./perf trace
            perf-4303  ... irq_handler_entry: irq=18 handler=eth0
            init-0     ... irq_handler_entry: irq=18 handler=eth0
            init-0     ... irq_handler_entry: irq=18 handler=eth0
            init-0     ... irq_handler_entry: irq=18 handler=eth0
            init-0     ... irq_handler_entry: irq=18 handler=eth0

See Documentation/trace/events.txt for the syntax of filter
expressions.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <4AD6955F.90602@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agotracing/profile: Add filter support
Li Zefan [Thu, 15 Oct 2009 03:21:42 +0000]
tracing/profile: Add filter support

- Add an ioctl to allocate a filter for a perf event.

- Free the filter when the associated perf event is to be freed.

- Do the filtering in perf_swevent_match().

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <4AD69546.8050401@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agotracing/filters: Use a different op for glob match
Li Zefan [Thu, 15 Oct 2009 03:21:12 +0000]
tracing/filters: Use a different op for glob match

"==" will always do a full match, and "~" will do a glob match.

In the future, we may add "=~" for regex match.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <4AD69528.3050309@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agotracing/filters: Refactor subsystem filter code
Li Zefan [Thu, 15 Oct 2009 03:20:34 +0000]
tracing/filters: Refactor subsystem filter code

Change:
for_each_pred
for_each_subsystem
To:
for_each_subsystem
for_each_pred

This change also prepares for later patches.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <4AD69502.8060903@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agoMerge branch 'tracing/core' into perf/core
Ingo Molnar [Thu, 15 Oct 2009 09:33:56 +0000]
Merge branch 'tracing/core' into perf/core

Merge reason: to add event filter support we need the following
commits from the tracing tree:

 3f6fe06: tracing/filters: Unify the regex parsing helpers
 1889d20: tracing/filters: Provide basic regex support
 737f453: tracing/filters: Cleanup useless headers

Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agoperf tools: Remove all char * typecasts and use const in prototype
Steven Rostedt [Wed, 14 Oct 2009 19:43:44 +0000]
perf tools: Remove all char * typecasts and use const in prototype

The (char *) for all the static strings was a fix for the
symptom and not the disease. The real issue was that the
function prototypes needed to be declared "const char *".

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091014194400.635935008@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agoperf tools: Handle - and + in parsing trace print format
Steven Rostedt [Wed, 14 Oct 2009 19:43:43 +0000]
perf tools: Handle - and + in parsing trace print format

The opterators '-' and '+' are not handled in the trace print
format.

To do: '++' and '--'.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091014194400.330843045@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agoperf tools: Add latency format to trace output
Steven Rostedt [Wed, 14 Oct 2009 19:43:42 +0000]
perf tools: Add latency format to trace output

Add the irqs disabled, preemption count, need resched, and other
info that is shown in the latency format of ftrace.

 # perf trace -l
    perf-16457   2..s2. 53636.260344: kmem_cache_free: call_site=ffffffff811198f
    perf-16457   2..s2. 53636.264330: kmem_cache_free: call_site=ffffffff811198f
    perf-16457   2d.s4. 53636.300006: kmem_cache_free: call_site=ffffffff810d889

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091014194400.076588953@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agoperf tools: Handle both versions of ftrace output
Steven Rostedt [Wed, 14 Oct 2009 19:43:41 +0000]
perf tools: Handle both versions of ftrace output

The ftrace output events can have either arguments or no
arguments. The parser needs to be able to handle both.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091014194359.790221427@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agoperf tools: Fix bprintk reading in trace output
Steven Rostedt [Wed, 14 Oct 2009 19:43:40 +0000]
perf tools: Fix bprintk reading in trace output

The bprintk parsing was broken in more ways than one.

The file parsing was incorrect, and the words used by the
arguments are always 4 bytes aligned, even on 64-bit machines.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091014194359.520931637@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agoperf tools: Still continue on failed parsing of an event
Steven Rostedt [Wed, 14 Oct 2009 19:43:39 +0000]
perf tools: Still continue on failed parsing of an event

Even though an event may fail to parse, we should not kill the
entire report. The trace should still be able to show what it
can.

If an event fails to parse, a warning is printed, and the output
continues.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091014194359.190809589@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agoperf tools: Handle the case with and without the "signed" trace field
Steven Rostedt [Wed, 14 Oct 2009 19:43:38 +0000]
perf tools: Handle the case with and without the "signed" trace field

The trace format files now have a "signed" field. But we should
still be able to handle the kernels that do not have this field.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091014194358.888239553@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agoperf tools: Handle newlines in trace parsing better
Steven Rostedt [Wed, 14 Oct 2009 19:43:37 +0000]
perf tools: Handle newlines in trace parsing better

New lines between args in the trace format can break the
parsing. This should not be the case.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091014194358.637991808@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agoperf tools: Handle * as typecast in trace parsing
Steven Rostedt [Wed, 14 Oct 2009 19:43:36 +0000]
perf tools: Handle * as typecast in trace parsing

The '*' is currently only treated as a multiplication, and it
needs to be handled as a typecast pointer.

This is the version used by trace-cmd.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091014194358.409327875@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agoperf tools: Handle arrays in print fields for trace parsing
Steven Rostedt [Wed, 14 Oct 2009 19:43:35 +0000]
perf tools: Handle arrays in print fields for trace parsing

The array used by the ftrace stack events (caller[x]) causes
issues with the parser. This adds code to handle the case, but
it also assumes that the array is of type long.

Note, this is a special case used (currently) only by the ftrace
user and kernel stack records.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091014194358.124833639@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agoperf tools: Handle trace parsing of < and >
Steven Rostedt [Wed, 14 Oct 2009 19:43:34 +0000]
perf tools: Handle trace parsing of < and >

The code to handle the '<' and '>' ops was all in place, but
they were not in the switch statement to consider them as valid
ops.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091014194357.807434040@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agoperf tools: Fix backslash processing on trace print formats
Steven Rostedt [Wed, 14 Oct 2009 19:43:33 +0000]
perf tools: Fix backslash processing on trace print formats

The handling of backslashes was broken. It would stop parsing
when encountering one. Also, '\n', '\t', '\r' and '\\' were not
converted.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091014194357.521974680@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agoperf tools: Handle print concatenations in event format file
Steven Rostedt [Wed, 14 Oct 2009 19:43:32 +0000]
perf tools: Handle print concatenations in event format file

kmem_alloc ftrace event format had a string that was broken up
by two tokens. "string 1" "string 2". This patch lets the parser
be able to handle the concatenation.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091014194357.253818714@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agoMerge branch 'linus' into perf/core
Ingo Molnar [Thu, 15 Oct 2009 06:44:42 +0000]
Merge branch 'linus' into perf/core

Merge reason: pick up tools/perf/ changes from upstream.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agoRevert "x86: linker script syntax nits"
Ingo Molnar [Thu, 15 Oct 2009 06:08:12 +0000]
Revert "x86: linker script syntax nits"

This reverts commit e9a63a4e559fbdc522072281d05e6b13c1022f4b.

This breaks older binutils, where sink-less asserts are broken.

See this commit for further details:

  d2ba8b2: x86: Fix assert syntax in vmlinux.lds.S

Acked-by: "H. Peter Anvin" <hpa@zytor.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <4AD6523D.5030909@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agoMerge branch 'linus' into x86/urgent
Ingo Molnar [Thu, 15 Oct 2009 06:07:26 +0000]
Merge branch 'linus' into x86/urgent

Merge reason: pull in latest, to be able to revert a patch there.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agoMerge branch 'misc' into release
Len Brown [Thu, 15 Oct 2009 04:47:13 +0000]
Merge branch 'misc' into release

10 years agoMerge branch 'launchpad-333386' into release
Len Brown [Thu, 15 Oct 2009 04:46:57 +0000]
Merge branch 'launchpad-333386' into release

10 years agoMerge branch 'eeepc-laptop' into release
Len Brown [Thu, 15 Oct 2009 04:46:46 +0000]
Merge branch 'eeepc-laptop' into release

10 years agoMerge branch 'bugzilla-14129' into release
Len Brown [Thu, 15 Oct 2009 04:45:37 +0000]
Merge branch 'bugzilla-14129' into release

10 years agovmxnet: fix 2 build problems
Randy Dunlap [Thu, 15 Oct 2009 03:38:58 +0000]
vmxnet: fix 2 build problems

vmxnet3 uses in_dev* interfaces so it should depend on INET.
Also fix so that the driver builds when CONFIG_PCI_MSI is disabled.

vmxnet3_drv.c:(.text+0x2a88cb): undefined reference to `in_dev_finish_destroy'

drivers/net/vmxnet3/vmxnet3_drv.c:1335: error: 'struct vmxnet3_intr' has no member named 'msix_entries'
drivers/net/vmxnet3/vmxnet3_drv.c:1384: error: 'struct vmxnet3_intr' has no member named 'msix_entries'
drivers/net/vmxnet3/vmxnet3_drv.c:2137: error: 'struct vmxnet3_intr' has no member named 'msix_entries'
drivers/net/vmxnet3/vmxnet3_drv.c:2138: error: 'struct vmxnet3_intr' has no member named 'msix_entries'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Bhavesh davda <bhavesh@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

10 years agoMerge commit 'ftrace/ppc' into merge
Benjamin Herrenschmidt [Thu, 15 Oct 2009 03:09:11 +0000]
Merge commit 'ftrace/ppc' into merge

10 years agoMerge branch '2_6_32rc4_fixes' of git://git.pwsan.com/linux-2.6 into omap-fixes-for...
Tony Lindgren [Wed, 14 Oct 2009 22:46:15 +0000]
Merge branch '2_6_32rc4_fixes' of git://git.pwsan.com/linux-2.6 into omap-fixes-for-linus

10 years agotty: fix vt_compat_ioctl
Andreas Schwab [Mon, 28 Sep 2009 18:10:02 +0000]
tty: fix vt_compat_ioctl

Call compat_unimap_ioctl, not do_unimap_ioctl.

This was broken by commit e9216651.

The compat_unimap_ioctl was originally called do_unimap_ioctl in
fs/compat_ioctl.h which got moved to drivers/char/vt_ioctl.c.
In that patch, the caller was not updated and consequently called
the native handler.

Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoOMAP2xxx clock: set up clockdomain pointer in struct clk
Paul Walmsley [Wed, 14 Oct 2009 22:40:37 +0000]
OMAP2xxx clock: set up clockdomain pointer in struct clk

clock24xx.c is missing a omap2_init_clk_clkdm() in its
omap2_clk_init() function.  Among other bad effects, this causes the
OMAP hwmod layer to oops on boot.

Thanks to Carlos Aguiar <carlos.aguiar@indt.org.br> and Stefano
Panella <Stefano.Panella@csr.com> for reporting this bug.  Thanks to Tony
Lindgren <tony@atomide.com> for N800 booting advice.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Carlos Aguiar <carlos.aguiar@indt.org.br>
Cc: Stefano Panella <Stefano.Panella@csr.com>
Cc: Tony Lindgren <tony@atomide.com>

10 years agoOMAP: Fix race condition with autodeps
Kalle Jokiniemi [Wed, 14 Oct 2009 22:40:37 +0000]
OMAP: Fix race condition with autodeps

There is a possible race condition in clockdomain
code handling hw supported idle transitions.

When multiple autodeps dependencies are being added
or removed, a transition of still remaining dependent
powerdomain can result in false readings of the
state counter. This is especially fatal for off mode
state counter, as it could result in a driver not
noticing a context loss.

Fixed by disabling hw supported state transitions
when autodeps are being changed.

Signed-off-by: Kalle Jokiniemi <kalle.jokiniemi@digia.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>

10 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394...
Linus Torvalds [Wed, 14 Oct 2009 22:36:19 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/ieee1394/linux1394-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  firewire: sbp2: provide fallback if mgt_ORB_timeout is missing
  ieee1394: add documentation entry to MAINTAINERS
  ieee1394: update URLs in debugging-via-ohci1394.txt

10 years agoMerge branch 'tty-fixes'
Linus Torvalds [Wed, 14 Oct 2009 22:34:55 +0000]
Merge branch 'tty-fixes'

* branch 'tty-fixes':
  tty: use the new 'flush_delayed_work()' helper to do ldisc flush
  workqueue: add 'flush_delayed_work()' to run and wait for delayed work
  Make flush_to_ldisc properly handle parallel calls

10 years agoMerge branch 'topic/x86-lds-nits' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Wed, 14 Oct 2009 22:33:05 +0000]
Merge branch 'topic/x86-lds-nits' of git://git./linux/kernel/git/frob/linux-2.6-roland

* 'topic/x86-lds-nits' of git://git.kernel.org/pub/scm/linux/kernel/git/frob/linux-2.6-roland:
  x86: linker script syntax nits

10 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6
Linus Torvalds [Wed, 14 Oct 2009 22:31:48 +0000]
Merge git://git./linux/kernel/git/davem/sparc-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  watchdog: Fix rio watchdog probe function
  sparc64: Set IRQF_DISABLED on LDC channel IRQs.
  sparc64: Fix D-cache flushing on swapin from SW devices.
  sparc64: Fix niagara2 perf IRQ bits.

10 years agoMerge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6
Linus Torvalds [Wed, 14 Oct 2009 22:31:15 +0000]
Merge branch 'for-linus' of git://git390.marist.edu/linux-2.6

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
  [S390] sclp_vt220 build fix
  [S390] cio: change misleading console logic
  [S390] call home support: fix proc handler
  [S390] dasd: use idal for device characteristics
  [S390] Add highgprs facility to /proc/cpuinfo
  [S390] dasd: fix locking bug
  [S390] tape390: Fix request queue handling in block driver
  [S390] hypfs: Use subcode 6 if subcode 7 is not available

10 years agoMerge branch 'sh/for-2.6.32' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal...
Linus Torvalds [Wed, 14 Oct 2009 22:30:45 +0000]
Merge branch 'sh/for-2.6.32' of git://git./linux/kernel/git/lethal/sh-2.6

* 'sh/for-2.6.32' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  sh: Fix a TRACE_IRQS_OFF typo.
  sh: Optimize the setup_rt_frame() I-cache flush.
  sh: Populate initial secondary CPU info from boot_cpu_data.
  sh: Tidy up SMP cpuinfo.
  sh: Use boot_cpu_data for FPU tests in sigcontext paths.
  sh: ftrace: Fix up syscall tracepoint support.
  sh: force dcache flush if dcache_dirty bit set.
  sh: update die() output.

10 years agoMerge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Wed, 14 Oct 2009 22:25:35 +0000]
Merge branch 'core-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  oprofile: warn on freeing event buffer too early
  oprofile: fix race condition in event_buffer free
  lockdep: Use cpu_clock() for lockstat

10 years agoMerge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Wed, 14 Oct 2009 22:25:23 +0000]
Merge branch 'perf-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf events: Update MAINTAINERS entry file patterns
  perf tools: Remove static debugfs path from parse-events
  perf tools: Fix the NO_64BIT build on pure 64-bit systems
  perf tools: Fix const char type propagation