8 years agoipv4: Create and use route lookup helpers.
David S. Miller [Sat, 12 Mar 2011 05:00:52 +0000]
ipv4: Create and use route lookup helpers.

The idea here is this minimizes the number of places one has to edit
in order to make changes to how flows are defined and used.

Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoMerge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/jkirsher/net...
David S. Miller [Sat, 12 Mar 2011 22:41:02 +0000]
Merge branch 'master' of /linux/kernel/git/jkirsher/net-next-2.6

8 years agoMerge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville...
David S. Miller [Sat, 12 Mar 2011 19:06:59 +0000]
Merge branch 'for-davem' of git://git./linux/kernel/git/linville/wireless-next-2.6

8 years agoixgbe: DCB, PFC not cleared until reset occurs
John Fastabend [Thu, 10 Mar 2011 12:06:12 +0000]
ixgbe: DCB, PFC not cleared until reset occurs

The PFC configuration is not cleared until the device is reset. This
has not been a problem because setting DCB attributes forced a
hardware reset. Now that we no longer require this reset to occur
PFC remains configured even after being disabled until the
device is reset.

This removes a goto in the PFC hardware set routines for 82598 and
82599 devices that was short circuiting the clear.

Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

8 years agoixgbe: add support for VF Transmit rate limit using iproute2
Lior Levy [Fri, 11 Mar 2011 02:03:07 +0000]
ixgbe: add support for VF Transmit rate limit using iproute2

Implemented ixgbe_ndo_set_vf_bw function which is being used by iproute2
tool. In addition, updated ixgbe_ndo_get_vf_config function to show the
actual rate limit to the user.

The rate limitation can be configured only when the link is up and the
link speed is 10Gb.
The rate limit value can be 0 or ranged between 11 and actual link
speed measured in Mbps. A value of '0' disables the rate limit for
this specific VF.

iproute2 usage will be 'ip link set ethX vf Y rate Z'.
After the command is made, the rate will be changed instantly.
To view the current rate limit, use 'ip link show ethX'.

The rates will be zeroed only upon driver reload or a link speed change.

This feature is being supported by 82599 and X540 devices.

Signed-off-by: Lior Levy <lior.levy@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

8 years agoixgbe: DCB, set minimum bandwidth per traffic class
John Fastabend [Wed, 9 Mar 2011 04:46:16 +0000]
ixgbe: DCB, set minimum bandwidth per traffic class

DCB provides a guaranteed bandwidth in the case with 0%
bandwidth then no bandwidth is guaranteed. However the
traffic class should still be able to transmit traffic.
For this to work the traffic class must be given the
minimum credits required to send a frame.

Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

8 years agoixgbe: correct typo in define name
Emil Tantilov [Sat, 5 Mar 2011 08:02:18 +0000]
ixgbe: correct typo in define name

VF Free Running Timer register name missing an F.

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Acked-by: Greg Rose <gregory.v.rose@intel.com>
Tested-by: Evan Swanson <evan.swanson@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

8 years agoixgbe: update PHY code to support 100Mbps as well as 1G/10G
Emil Tantilov [Sat, 5 Mar 2011 01:28:07 +0000]
ixgbe: update PHY code to support 100Mbps as well as 1G/10G

This change updates the PHY setup code to support 100Mbps capable PHYs
as well as 10G and 1Gbps.

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

8 years agoixgbe: remove timer reset to 0 on timeout
Emil Tantilov [Fri, 4 Mar 2011 03:20:59 +0000]
ixgbe: remove timer reset to 0 on timeout

The VF mailbox polling for acks and messages would reset the timer to zero
on a timeout. Under heavy load a timeout may actually occur without being
the result of an error and when this occurs it is not practical to perform
a full VF driver reset on every message timeout. Instead, just return an
error (which is already done) and the VF driver will have an opportunity
to retry the operation.

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Acked-by: Greg Rose <gregory.v.rose@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

8 years agoixgbe: DCB during ifup use correct CEE or IEEE mode
John Fastabend [Wed, 23 Feb 2011 05:58:25 +0000]
ixgbe: DCB during ifup use correct CEE or IEEE mode

DCB settings are cleared in the hardware across link events
during ifup ixgbe reprograms the hardware for DCB if it is
enabled. Now that we have two modes CEE or IEEE we need to
use the correct set of configuration data.

This patch checks the dcbx_cap bits and then enables the
device in the correct mode.

Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

8 years agoixgbe: IEEE 802.1Qaz, implement priority assignment table
John Fastabend [Wed, 23 Feb 2011 05:58:19 +0000]
ixgbe: IEEE 802.1Qaz, implement priority assignment table

This patch adds support to use the priority assignment
table in the ieee_ets structure to map priorities to
traffic classes. Previously ixgbe only supported a
1:1 mapping. Now we can enable and disable hardware
DCB support when multiple traffic classes are actually
being used. This allows the default case all priorities
mapped to traffic class 0 to work in normal hardware
mode and utilize the full packet buffer.

This patch does not address putting the hardware in
4TC mode so packet buffer space may be underutilized
in this case. A follow up patch can address this
optimization. But at least we have the hooks to do
this now.

Also CEE will behave as it always has and map priorities
1:1 with traffic classes.

Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

8 years agoixgbe: DCB, missed translation from 8021Qaz TSA to CEE link strict
John Fastabend [Wed, 23 Feb 2011 05:58:14 +0000]
ixgbe: DCB, missed translation from 8021Qaz TSA to CEE link strict

The patch below  allowed IEEE 802.1Qaz and CEE DCB hardware
configurations to use common hardware set routines,

commit 88eb696cc6a7af8f9272266965b1a4dd7d6a931b
Author: John Fastabend <john.r.fastabend@intel.com>
Date:   Thu Feb 10 03:02:11 2011 -0800

    ixgbe: DCB, abstract out dcb_config from DCB hardware configuration

However the case when CEE link strict and group strict
are set was missed and are currently being mapped
incorrectly in some configurations.

This patch resolves this.

Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

8 years agoixgbe: DCB: enable RSS to be used with DCB
John Fastabend [Wed, 23 Feb 2011 05:58:08 +0000]
ixgbe: DCB: enable RSS to be used with DCB

RSS had previously been disabled when DCB was enabled because
DCB was single queued per traffic class. Now that DCB implements
multiple Tx/Rx rings per traffic class enable RSS.

Here RSS hashes across the queues in the traffic class.

Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Tested-by: Ross Brattain <ross.b.brattain.@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

8 years agoixgbe: enable ndo_tc_setup
John Fastabend [Wed, 23 Feb 2011 05:58:03 +0000]
ixgbe: enable ndo_tc_setup

This patch adds the ndo_tc_setup to ixgbe. By default we set
the device to use strict priority.

Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Tested-by: Ross Brattain <ross.b.brattain.@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

8 years agoixgbe: DCB, use multiple Tx rings per traffic class
John Fastabend [Tue, 8 Mar 2011 03:44:52 +0000]
ixgbe: DCB, use multiple Tx rings per traffic class

This enables multiple {Tx|Rx} rings per traffic class while in DCB
mode. In order to get this working as expected the tc_to_tx net
device mapping is configured as well as the prio_tc_map.

skb priorities are mapped across a range of queue pairs to get
a distribution per traffic class. The maximum number of
queue pairs used while in DCB mode is capped at 64. The hardware
max is actually 128 queues but 64 is sufficient for now and
allocating more seemed a bit excessive. It is easy enough to
increase the cap later if need be.

To get the 802.1Q priority tags inserted correctly ixgbe was
previously using the skb queue_mapping field to directly set
the 802.1Q priority. This no longer works because we have removed
the 1:1 mapping between queues and traffic class. Each ring
is aligned with an 802.1Qaz traffic class so here we add an
extra field to the ring struct to identify the 802.1Q traffic
class. This uses an extra byte of the ixgbe_ring struct
fortunately there was a 2byte hole,

struct ixgbe_ring {
        void *                     desc;                 /*     0     8 */
        struct device *            dev;                  /*     8     8 */
        struct net_device *        netdev;               /*    16     8 */
        union {
                struct ixgbe_tx_buffer * tx_buffer_info; /*           8 */
                struct ixgbe_rx_buffer * rx_buffer_info; /*           8 */
        };                                               /*    24     8 */
        long unsigned int          state;                /*    32     8 */
        u8                         atr_sample_rate;      /*    40     1 */
        u8                         atr_count;            /*    41     1 */
        u16                        count;                /*    42     2 */
        u16                        rx_buf_len;           /*    44     2 */
        u16                        next_to_use;          /*    46     2 */
        u16                        next_to_clean;        /*    48     2 */
        u8                         queue_index;          /*    50     1 */
        u8                         reg_idx;              /*    51     1 */
        u16                        work_limit;           /*    52     2 */

        /* XXX 2 bytes hole, try to pack */

        u8 *                       tail;                 /*    56     8 */
        /* --- cacheline 1 boundary (64 bytes) --- */

Now we can set the VLAN priority directly and it will be
correct. User space can indicate the 802.1Qaz priority
using the SO_PRIORITY setsocket() option and QOS layer will
steer the skb to the correct rings. Additionally using
the multiq qdisc with a queue_mapping action works as
well.

Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

8 years agoixgbe: DCB remove ixgbe_fcoe_getapp routine
John Fastabend [Wed, 23 Feb 2011 05:57:52 +0000]
ixgbe: DCB remove ixgbe_fcoe_getapp routine

Remove ixgbe_fcoe_getapp() and use the generic kernel
routine instead. Also add application priority to the
kernel maintained list on setapp so applications and
stacks can query the value.

Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

8 years agoixgbe: DCB, implement ieee_setapp dcbnl ops
John Fastabend [Wed, 23 Feb 2011 05:57:47 +0000]
ixgbe: DCB, implement ieee_setapp dcbnl ops

Implement ieee_setapp dcbnl ops in ixgbe. This is required
to setup FCoE which requires dedicated resources. If the
app data is not for FCoE then no action is taken in ixgbe
except to add it to the dcb_app_list.

Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

8 years agoixgbe: DCB, implement capabilities flags
John Fastabend [Tue, 1 Mar 2011 05:25:35 +0000]
ixgbe: DCB, implement capabilities flags

This implements dcbnl get and set capabilities ops. The
devices supported by ixgbe can be configured to run in
IEEE or CEE modes but not both.

With the DCBX set capabilities bit we add an explicit
signal that must be used to toggle between these modes.
This patch adds logic to fail the CEE command set_hw_all()
which programs the device with a CEE configuration if
the CEE caps bit is not set. Similarly, IEEE set
commands will fail if the IEEE caps bit is not set. We
allow most CEE config set commands to occur because they
do not touch the hardware until set_hw_all() is called.

The one exception to the above is the {set|get}app routines.
These must always be protected by caps bits to ensure
side effects do not corrupt the current configured mode.

By requiring the caps bit to be set correctly we can
maintain a consistent configuration in the hardware
for CEE or IEEE modes and prevent partial hardware
configurations that may occur if user space does
not send a complete IEEE or CEE configurations.

It is expected that user space will signal a DCBX mode
before programming device.

Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

8 years agoigb: Bump version to 3.0.6
Carolyn Wyborny [Sat, 12 Mar 2011 04:58:19 +0000]
igb: Bump version to 3.0.6

This patch updates igb version to 3.0.6.

Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

8 years agoigb: Add DMA Coalescing feature to driver
Carolyn Wyborny [Sat, 12 Mar 2011 04:43:54 +0000]
igb: Add DMA Coalescing feature to driver

This patch add DMA Coalescing which is a power-saving feature that
coalesces DMA writes in order to stay in a low-power state as much
as possible.  Feature is disabled by default.

Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

8 years agoigb: Update NVM functions to work with i350 devices
Carolyn Wyborny [Sat, 12 Mar 2011 04:43:18 +0000]
igb: Update NVM functions to work with i350 devices

This patch adds functions and functions pointers to accommodate
differences between NVM interfaces and options for i350 devices,
82580 devices and the rest.

Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

8 years agoigb: Add Energy Efficient Ethernet (EEE) for i350 devices.
Carolyn Wyborny [Sat, 12 Mar 2011 04:42:13 +0000]
igb: Add Energy Efficient Ethernet (EEE) for i350 devices.

This patch adds the EEE feature for i350 devices, enabled by default.

Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

8 years agoixgbevf: Fix Driver String
Greg Rose [Sat, 12 Mar 2011 02:01:29 +0000]
ixgbevf: Fix Driver String

Change the driver string to match the PF driver string format.

Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

8 years agoixgbevf: Fix Version String
Greg Rose [Wed, 2 Mar 2011 06:52:30 +0000]
ixgbevf: Fix Version String

The kernel version string is off by a major version number since
new silicon was just introduced and also uses the wrong format for
the version postfix.

Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

8 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirel...
John W. Linville [Fri, 11 Mar 2011 19:11:11 +0000]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless-next-2.6 into for-davem

8 years agoe1000e: bump version number
Bruce Allan [Sat, 26 Feb 2011 03:12:19 +0000]
e1000e: bump version number

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

8 years agoe1000e: do not suggest the driver supports Wake-on-ARP
Bruce Allan [Fri, 4 Mar 2011 09:07:01 +0000]
e1000e: do not suggest the driver supports Wake-on-ARP

The driver doesn't support Wake-on-ARP, so don't advertise through ethtool
that it does.

Cleanup some coding style issues in the same functions.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

8 years agoe1000e: disable jumbo frames on 82579 when MACsec enabled in EEPROM
Bruce Allan [Fri, 25 Feb 2011 07:44:51 +0000]
e1000e: disable jumbo frames on 82579 when MACsec enabled in EEPROM

If/when an OEM enables MACsec in the 82579 EEPROM, disable jumbo frames
support in the driver due to an interoperability issue in hardware that
prevents jumbo packets from being transmitted or received.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

8 years agoe1000e: do not toggle LANPHYPC value bit when PHY reset is blocked
Bruce Allan [Fri, 25 Feb 2011 06:25:18 +0000]
e1000e: do not toggle LANPHYPC value bit when PHY reset is blocked

When PHY reset is intentionally blocked on 82577/8/9, do not toggle the
LANPHYPC value bit (essentially performing a hard power reset of the
device) otherwise the PHY can be put into an unknown state.

Cleanup whitespace in the same function.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

8 years agoe1000e: extend EEE LPI timer to prevent dropped link
Bruce Allan [Fri, 25 Feb 2011 06:58:03 +0000]
e1000e: extend EEE LPI timer to prevent dropped link

The link can be unexpectedly dropped when the timer for entering EEE low-
power-idle quiet state expires too soon.  The timer needs to be extended
from 196usec to 200usec after every LCD (PHY) reset to prevent this from
happening.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

8 years agoe1000e: extend timeout for ethtool link test diagnostic
Bruce Allan [Fri, 25 Feb 2011 06:36:25 +0000]
e1000e: extend timeout for ethtool link test diagnostic

With some PHYs supported by this driver, link establishment can take a
little longer when connected to certain switches.  Extend the timeout to
reduce the number of false diagnostic failures, and cleanup a code style
issue in the same function.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

8 years agoe1000e: magic number cleanup - ETH_ALEN
Bruce Allan [Fri, 25 Feb 2011 07:09:37 +0000]
e1000e: magic number cleanup - ETH_ALEN

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

8 years agoe1000e: use dev_kfree_skb_irq() instead of dev_kfree_skb()
Bruce Allan [Thu, 10 Feb 2011 08:17:21 +0000]
e1000e: use dev_kfree_skb_irq() instead of dev_kfree_skb()

Based on a report and patch originally submitted by Prasanna Panchamukhi.

Use dev_kfree_skb_irq() in e1000_clean_jumbo_rx_irq() since this latter
function is called only in interrupt context.  This avoids "Warning:
kfree_skb on hard IRQ" messages.

Cc: "Prasanna S. Panchamukhi" <prasanna.panchamukhi@riverbed.com>
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

8 years agoixgbevf: remove Tx hang detection
Lior Levy [Wed, 2 Mar 2011 06:42:37 +0000]
ixgbevf: remove Tx hang detection

Removed Tx hang detection mechanism from ixgbevf.
This mechanism has no affect and can cause false alarm messages in some
cases. Especially when VF Tx rate limit is turned on.

The same mechanism was removed recently from igbvf.

Signed-off-by: Lior Levy <lior.levy@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

8 years agonet: add proper documentation for previously added net_device_ops for FCoE
Yi Zou [Wed, 9 Mar 2011 08:48:03 +0000]
net: add proper documentation for previously added net_device_ops for FCoE

Add proper documentation for previously added net_device_ops ops for FCoE.

Signed-off-by: Yi Zou <yi.zou@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

8 years agoixgb: convert to new VLAN model
Emil Tantilov [Thu, 27 Jan 2011 09:14:18 +0000]
ixgb: convert to new VLAN model

Based on a patch from Jesse Gross <jesse@nicira.com>

This switches the ixgb driver to use the new VLAN interfaces.
In doing this, it completes the work begun in
ae54496f9e8d40c89e5668205c181dccfa9ecda1 allowing the use of
hardware VLAN insertion without having a VLAN group configured.

CC: Jesse Gross <jesse@nicira.com>
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

8 years agoipv4: Kill flowi arg to fib_select_multipath()
David S. Miller [Fri, 11 Mar 2011 01:01:16 +0000]
ipv4: Kill flowi arg to fib_select_multipath()

Completely unused.

Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoipv4: Remove unnecessary test from ip_mkroute_input()
David S. Miller [Fri, 11 Mar 2011 00:23:24 +0000]
ipv4: Remove unnecessary test from ip_mkroute_input()

fl->oif will always be zero on the input path, so there is no reason
to test for that.

Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoipv4: Remove redundant RCU locking in ip_check_mc().
David S. Miller [Fri, 11 Mar 2011 00:34:38 +0000]
ipv4: Remove redundant RCU locking in ip_check_mc().

All callers are under rcu_read_lock() protection already.

Rename to ip_check_mc_rcu() to make it even more clear.

Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoMerge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
David S. Miller [Thu, 10 Mar 2011 22:26:00 +0000]
Merge branch 'master' of /linux/kernel/git/davem/net-2.6

Conflicts:
drivers/net/bnx2x/bnx2x_cmn.c

8 years agoip6ip6: autoload ip6 tunnel
stephen hemminger [Thu, 10 Mar 2011 11:43:19 +0000]
ip6ip6: autoload ip6 tunnel

Add necessary alias to autoload ip6ip6 tunnel module.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoMerge branch 'master' of /home/davem/src/GIT/linux-2.6/
David S. Miller [Thu, 10 Mar 2011 22:00:44 +0000]
Merge branch 'master' of /home/davem/src/GIT/linux-2.6/

8 years agonet: bridge builtin vs. ipv6 modular
Randy Dunlap [Thu, 10 Mar 2011 21:45:57 +0000]
net: bridge builtin vs. ipv6 modular

When configs BRIDGE=y and IPV6=m, this build error occurs:

br_multicast.c:(.text+0xa3341): undefined reference to `ipv6_dev_get_saddr'

BRIDGE_IGMP_SNOOPING is boolean; if it were tristate, then adding
depends on IPV6 || IPV6=n
to BRIDGE_IGMP_SNOOPING would be a good fix.  As it is currently,
making BRIDGE depend on the IPV6 config works.

Reported-by: Patrick Schaaf <netdev@bof.de>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoMerge branch 'media_fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab...
Linus Torvalds [Thu, 10 Mar 2011 21:22:10 +0000]
Merge branch 'media_fixes' of git://git./linux/kernel/git/mchehab/linux-2.6

* 'media_fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6:
  [media] mantis_pci: remove asm/pgtable.h include
  [media] tda829x: fix regression in probe functions
  [media] mceusb: don't claim multifunction device non-IR parts
  [media] nuvoton-cir: fix wake from suspend
  [media] cx18: Add support for Hauppauge HVR-1600 models with s5h1411
  [media] ivtv: Fix corrective action taken upon DMA ERR interrupt to avoid hang
  [media] cx25840: fix probing of cx2583x chips
  [media] cx23885: Remove unused 'err:' labels to quiet compiler warning
  [media] cx23885: Revert "Check for slave nack on all transactions"
  [media] DiB7000M: add pid filtering
  [media] Fix sysfs rc protocol lookup for rc-5-sz
  [media] au0828: fix VBI handling when in V4L2 streaming mode
  [media] ir-raw: Properly initialize the IR event (BZ#27202)
  [media] s2255drv: firmware re-loading changes
  [media] Fix double free of video_device in mem2mem_testdev
  [media] DM04/QQBOX memcpy to const char fix

8 years agoipmi: Fix IPMI errors due to timing problems
Doe, YiCheng [Thu, 10 Mar 2011 20:00:21 +0000]
ipmi: Fix IPMI errors due to timing problems

This patch fixes an issue in OpenIPMI module where sometimes an ABORT command
is sent after sending an IPMI request to BMC causing the IPMI request to fail.

Signed-off-by: YiCheng Doe <yicheng.doe@hp.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Acked-by: Tom Mingarelli <thomas.mingarelli@hp.com>
Tested-by: Andy Cress <andy.cress@us.kontron.com>
Tested-by: Mika Lansirine <Mika.Lansirinne@stonesoft.com>
Tested-by: Brian De Wolf <bldewolf@csupomona.edu>
Cc: Jean Michel Audet <Jean-Michel.Audet@ca.Kontron.com>
Cc: Jozef Sudelsky <jozef.sudolsky@elbiahosting.sk>
Acked-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
Linus Torvalds [Thu, 10 Mar 2011 21:16:01 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
  fs/dcache: allow d_obtain_alias() to return unhashed dentries
  Check for immutable/append flag in fallocate path
  sysctl: the include of rcupdate.h is only needed in the kernel
  fat: fix d_revalidate oopsen on NFS exports
  jfs: fix d_revalidate oopsen on NFS exports
  ocfs2: fix d_revalidate oopsen on NFS exports
  gfs2: fix d_revalidate oopsen on NFS exports
  fuse: fix d_revalidate oopsen on NFS exports
  ceph: fix d_revalidate oopsen on NFS exports
  reiserfs xattr ->d_revalidate() shouldn't care about RCU
  /proc/self is never going to be invalidated...

8 years agoMerge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Thu, 10 Mar 2011 21:09:26 +0000]
Merge branch 'x86-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, UV: Initialize the broadcast assist unit base destination node id properly
  x86, numa: Fix numa_emulation code with memory-less node0
  x86, build: Make sure mkpiggy fails on read error

8 years agoMerge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Thu, 10 Mar 2011 21:08:59 +0000]
Merge branch 'sched-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: Fix sched rt group scheduling when hierachy is enabled

8 years agoMerge branch 'perf/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux...
Linus Torvalds [Thu, 10 Mar 2011 21:07:38 +0000]
Merge branch 'perf/urgent' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'perf/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf symbols: Avoid resolving [kernel.kallsyms] to real path for buildid cache
  perf symbols: Fix vmlinux path when not using --symfs

8 years agodrm/i915: Revive combination mode for backlight control
Takashi Iwai [Thu, 10 Mar 2011 13:02:12 +0000]
drm/i915: Revive combination mode for backlight control

This reverts commit 951f3512dba5bd44cda3e5ee22b4b522e4bb09fb

    drm/i915: Do not handle backlight combination mode specially

since this commit introduced other regressions due to untouched LBPC
register, e.g. the backlight dimmed after resume.

In addition to the revert, this patch includes a fix for the original
issue (weird backlight levels) by removing the wrong bit shift for
computing the current backlight level.
Also, including typo fixes (lpbc -> lbpc).

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=34524
Acked-by: Indan Zupancic <indan@nul.nu>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agofs/dcache: allow d_obtain_alias() to return unhashed dentries
J. Bruce Fields [Tue, 18 Jan 2011 20:45:09 +0000]
fs/dcache: allow d_obtain_alias() to return unhashed dentries

Without this patch, inodes are not promptly freed on last close of an
unlinked file by an nfs client:

client$ mount -tnfs4 server:/export/ /mnt/
client$ tail -f /mnt/FOO
...
server$ df -i /export
server$ rm /export/FOO
(^C the tail -f)
server$ df -i /export
server$ echo 2 >/proc/sys/vm/drop_caches
server$ df -i /export

the df's will show that the inode is not freed on the filesystem until
the last step, when it could have been freed after killing the client's
tail -f. On-disk data won't be deallocated either, leading to possible
spurious ENOSPC.

This occurs because when the client does the close, it arrives in a
compound with a putfh and a close, processed like:

- putfh: look up the filehandle.  The only alias found for the
  inode will be DCACHE_UNHASHED alias referenced by the filp
  this, so it creates a new DCACHE_DISCONECTED dentry and
  returns that instead.
- close: closes the existing filp, which is destroyed
  immediately by dput() since it's DCACHE_UNHASHED.
- end of the compound: release the reference
  to the current filehandle, and dput() the new
  DCACHE_DISCONECTED dentry, which gets put on the
  unused list instead of being destroyed immediately.

Nick Piggin suggested fixing this by allowing d_obtain_alias to return
the unhashed dentry that is referenced by the filp, instead of making it
create a new dentry.

Leave __d_find_alias() alone to avoid changing behavior of other
callers.

Also nfsd doesn't need all the checks of __d_find_alias(); any dentry,
hashed or unhashed, disconnected or not, should work.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

8 years agotg3: Remove 5750 PCI code
Matt Carlson [Wed, 9 Mar 2011 16:58:25 +0000]
tg3: Remove 5750 PCI code

The 5750 ASIC rev was never released as a PCI device.  It only exists as
a PCIe device.  This patch removes the code that supports the former
configuration.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agotg3: Move tg3_init_link_config to tg3_phy_probe
Matt Carlson [Wed, 9 Mar 2011 16:58:24 +0000]
tg3: Move tg3_init_link_config to tg3_phy_probe

This patch moves the function that initializes the link configuration
closer to the place where the rest of the phy code is initialized.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agotg3: Refine VAux decision process
Matt Carlson [Wed, 9 Mar 2011 16:58:23 +0000]
tg3: Refine VAux decision process

In the near future, the VAux switching decision process is going to get
more complicated.  This patch refines and consolidates the existing
algorithm in anticipation of the new scheme.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agotg3: cleanup pci device table vars
Matt Carlson [Wed, 9 Mar 2011 16:58:22 +0000]
tg3: cleanup pci device table vars

Commit 895950c2a6565d9eefda4a38b00fa28537e39fcb, entitled
"tg3: Use DEFINE_PCI_DEVICE_TABLE" moved two pci device tables into the
global address space, but didn't declare them static and didn't prefix
them with "tg3_".  This patch fixes those problems.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agotg3: Add code to verify RODATA checksum of VPD
Matt Carlson [Wed, 9 Mar 2011 16:58:21 +0000]
tg3: Add code to verify RODATA checksum of VPD

This patch adds code to verify the checksum stored in the "RV" info
keyword of the RODATA VPD section.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agotg3: Fix NVRAM selftest
Matt Carlson [Wed, 9 Mar 2011 16:58:20 +0000]
tg3: Fix NVRAM selftest

The tg3 NVRAM selftest actually fails when validating the checksum of
the legacy NVRAM format.  However, the test still reported success
because the last update of the return code was a success from the NVRAM
reads.  This patch fixes the code so that the error return code defaults
to a failure status.  Then the patch fixes the reason why the checsum
validation failed.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agotg3: Add missed 5719 workaround change
Matt Carlson [Wed, 9 Mar 2011 16:58:19 +0000]
tg3: Add missed 5719 workaround change

Commit 2866d956fe0ad8fc8d8a7c54104ccc879b49406d, entitled
"tg3: Expand 5719 workaround" extended a 5719 A0 workaround to all
revisions of the chip.  There was a change that should have been a
part of that patch that was missed.  This patch adds the missing
piece.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoCheck for immutable/append flag in fallocate path
Marco Stornelli [Sat, 5 Mar 2011 10:10:19 +0000]
Check for immutable/append flag in fallocate path

In the fallocate path the kernel doesn't check for the immutable/append
flag. It's possible to have a race condition in this scenario: an
application open a file in read/write and it does something, meanwhile
root set the immutable flag on the file, the application at that point
can call fallocate with success. In addition, we don't allow to do any
unreserve operation on an append only file but only the reserve one.

Signed-off-by: Marco Stornelli <marco.stornelli@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

8 years agosysctl: the include of rcupdate.h is only needed in the kernel
Stephen Rothwell [Thu, 10 Mar 2011 00:25:43 +0000]
sysctl: the include of rcupdate.h is only needed in the kernel

Fixes this built error:

include/linux/sysctl.h:28: included file 'linux/rcupdate.h' is not exported

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

8 years agofat: fix d_revalidate oopsen on NFS exports
Al Viro [Thu, 10 Mar 2011 08:45:49 +0000]
fat: fix d_revalidate oopsen on NFS exports

can't blindly check nd->flags in ->d_revalidate()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

8 years agojfs: fix d_revalidate oopsen on NFS exports
Al Viro [Thu, 10 Mar 2011 08:45:28 +0000]
jfs: fix d_revalidate oopsen on NFS exports

can't blindly check nd->flags in ->d_revalidate()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

8 years agoocfs2: fix d_revalidate oopsen on NFS exports
Al Viro [Thu, 10 Mar 2011 08:45:07 +0000]
ocfs2: fix d_revalidate oopsen on NFS exports

can't blindly check nd->flags in ->d_revalidate()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

8 years agogfs2: fix d_revalidate oopsen on NFS exports
Al Viro [Thu, 10 Mar 2011 08:44:48 +0000]
gfs2: fix d_revalidate oopsen on NFS exports

can't blindly check nd->flags in ->d_revalidate()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

8 years agofuse: fix d_revalidate oopsen on NFS exports
Al Viro [Thu, 10 Mar 2011 08:44:31 +0000]
fuse: fix d_revalidate oopsen on NFS exports

can't blindly check nd->flags in ->d_revalidate()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

8 years agoceph: fix d_revalidate oopsen on NFS exports
Al Viro [Thu, 10 Mar 2011 08:44:05 +0000]
ceph: fix d_revalidate oopsen on NFS exports

can't blindly check nd->flags in ->d_revalidate()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

8 years agoreiserfs xattr ->d_revalidate() shouldn't care about RCU
Al Viro [Wed, 16 Feb 2011 15:14:56 +0000]
reiserfs xattr ->d_revalidate() shouldn't care about RCU

... it returns an error unconditionally

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

8 years ago/proc/self is never going to be invalidated...
Al Viro [Wed, 16 Feb 2011 15:04:50 +0000]
/proc/self is never going to be invalidated...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

8 years agotcp: mark tcp_congestion_ops read_mostly
Stephen Hemminger [Thu, 10 Mar 2011 08:40:17 +0000]
tcp: mark tcp_congestion_ops read_mostly

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoipv4: Optimize flow initialization in fib_validate_source().
David S. Miller [Thu, 10 Mar 2011 04:57:50 +0000]
ipv4: Optimize flow initialization in fib_validate_source().

Like in commit 44713b67db10c774f14280c129b0d5fd13c70cf2
("ipv4: Optimize flow initialization in output route lookup."
we can optimize the on-stack flow setup to only initialize
the members which are actually used.

Otherwise we bzero the entire structure, then initialize
explicitly the first half of it.

Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoipv4: Optimize flow initialization in input route lookup.
David S. Miller [Thu, 10 Mar 2011 04:42:07 +0000]
ipv4: Optimize flow initialization in input route lookup.

Like in commit 44713b67db10c774f14280c129b0d5fd13c70cf2
("ipv4: Optimize flow initialization in output route lookup."
we can optimize the on-stack flow setup to only initialize
the members which are actually used.

Otherwise we bzero the entire structure, then initialize
explicitly the first half of it.

Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoipv6: Don't create clones of host routes.
David S. Miller [Thu, 10 Mar 2011 03:55:25 +0000]
ipv6: Don't create clones of host routes.

Addresses https://bugzilla.kernel.org/show_bug.cgi?id=29252
Addresses https://bugzilla.kernel.org/show_bug.cgi?id=30462

In commit d80bc0fd262ef840ed4e82593ad6416fa1ba3fc4 ("ipv6: Always
clone offlink routes.") we forced the kernel to always clone offlink
routes.

The reason we do that is to make sure we never bind an inetpeer to a
prefixed route.

The logic turned on here has existed in the tree for many years,
but was always off due to a protecting CPP define.  So perhaps
it's no surprise that there is a logic bug here.

The problem is that we canot clone a route that is already a
host route (ie. has DST_HOST set).  Because if we do, an identical
entry already exists in the routing tree and therefore the
ip6_rt_ins() call is going to fail.

This sets off a series of failures and high cpu usage, because when
ip6_rt_ins() fails we loop retrying this operation a few times in
order to handle a race between two threads trying to clone and insert
the same host route at the same time.

Fix this by simply using the route as-is when DST_HOST is set.

Reported-by: slash@ac.auone-net.jp
Reported-by: Ernst Sjöstrand <ernstp@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoMerge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Linus Torvalds [Thu, 10 Mar 2011 00:46:06 +0000]
Merge branch 'merge' of git://git./linux/kernel/git/benh/powerpc

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc/pseries: Disable VPNH feature
  powerpc/iseries: Fix early init access to lppaca

8 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris...
Linus Torvalds [Thu, 10 Mar 2011 00:45:02 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
  net: don't allow CAP_NET_ADMIN to load non-netdev kernel modules

8 years agosysctl: the include of rcupdate.h is only needed in the kernel
Stephen Rothwell [Thu, 10 Mar 2011 00:14:17 +0000]
sysctl: the include of rcupdate.h is only needed in the kernel

Fixes this build-check error:

  include/linux/sysctl.h:28: included file 'linux/rcupdate.h' is not exported

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agonet: don't allow CAP_NET_ADMIN to load non-netdev kernel modules
Vasiliy Kulikov [Tue, 1 Mar 2011 21:33:13 +0000]
net: don't allow CAP_NET_ADMIN to load non-netdev kernel modules

Since a8f80e8ff94ecba629542d9b4b5f5a8ee3eb565c any process with
CAP_NET_ADMIN may load any module from /lib/modules/.  This doesn't mean
that CAP_NET_ADMIN is a superset of CAP_SYS_MODULE as modules are
limited to /lib/modules/**.  However, CAP_NET_ADMIN capability shouldn't
allow anybody load any module not related to networking.

This patch restricts an ability of autoloading modules to netdev modules
with explicit aliases.  This fixes CVE-2011-1019.

Arnd Bergmann suggested to leave untouched the old pre-v2.6.32 behavior
of loading netdev modules by name (without any prefix) for processes
with CAP_SYS_MODULE to maintain the compatibility with network scripts
that use autoloading netdev modules by aliases like "eth0", "wlan0".

Currently there are only three users of the feature in the upstream
kernel: ipip, ip_gre and sit.

    root@albatros:~# capsh --drop=$(seq -s, 0 11),$(seq -s, 13 34) --
    root@albatros:~# grep Cap /proc/$$/status
    CapInh: 0000000000000000
    CapPrm: fffffff800001000
    CapEff: fffffff800001000
    CapBnd: fffffff800001000
    root@albatros:~# modprobe xfs
    FATAL: Error inserting xfs
    (/lib/modules/2.6.38-rc6-00001-g2bf4ca3/kernel/fs/xfs/xfs.ko): Operation not permitted
    root@albatros:~# lsmod | grep xfs
    root@albatros:~# ifconfig xfs
    xfs: error fetching interface information: Device not found
    root@albatros:~# lsmod | grep xfs
    root@albatros:~# lsmod | grep sit
    root@albatros:~# ifconfig sit
    sit: error fetching interface information: Device not found
    root@albatros:~# lsmod | grep sit
    root@albatros:~# ifconfig sit0
    sit0      Link encap:IPv6-in-IPv4
      NOARP  MTU:1480  Metric:1

    root@albatros:~# lsmod | grep sit
    sit                    10457  0
    tunnel4                 2957  1 sit

For CAP_SYS_MODULE module loading is still relaxed:

    root@albatros:~# grep Cap /proc/$$/status
    CapInh: 0000000000000000
    CapPrm: ffffffffffffffff
    CapEff: ffffffffffffffff
    CapBnd: ffffffffffffffff
    root@albatros:~# ifconfig xfs
    xfs: error fetching interface information: Device not found
    root@albatros:~# lsmod | grep xfs
    xfs                   745319  0

Reference: https://lkml.org/lkml/2011/2/24/203

Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Kees Cook <kees.cook@canonical.com>
Signed-off-by: James Morris <jmorris@namei.org>

8 years agopowerpc/pseries: Disable VPNH feature
Benjamin Herrenschmidt [Wed, 9 Mar 2011 13:00:14 +0000]
powerpc/pseries: Disable VPNH feature

This feature triggers nasty races in the scheduler between the
rebuilding of the topology and the load balancing code, causing
the machine to hang.

Disable it for now until the races are fixed.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

8 years agopowerpc/iseries: Fix early init access to lppaca
Benjamin Herrenschmidt [Sun, 6 Mar 2011 18:02:31 +0000]
powerpc/iseries: Fix early init access to lppaca

The combination of commit

8154c5d22d91cd16bd9985b0638c8957e4688d0e and
93c22703efa72c7527dbd586d1951c1f4a85fd70

Broke boot on iSeries.

The problem is that iSeries very early boot code, which generates
the device-tree and runs before our normal early initializations
does need access the lppaca's very early, before the PACA array is
initialized, and in fact even before the boot PACA has been
initialized (it contains all 0's at this stage).

However, the first patch above makes that code use the new
llpaca_of(cpu) accessor, which itself is changed by the second patch to
use the PACA array.

We fix that by reverting iSeries to directly dereferencing the array. In
addition, we fix all iterators in the iSeries code to always skip CPU
whose number is above 63 which is the maximum size of that array and
the maximum number of supported CPUs on these machines.

Additionally, we make sure the boot_paca is properly initialized
in our early startup code.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

8 years agoMerge branch 'for-2.6.38' of git://linux-nfs.org/~bfields/linux
Linus Torvalds [Wed, 9 Mar 2011 22:52:09 +0000]
Merge branch 'for-2.6.38' of git://linux-nfs.org/~bfields/linux

* 'for-2.6.38' of git://linux-nfs.org/~bfields/linux:
  nfsd: wrong index used in inner loop
  nfsd4: fix bad pointer on failure to find delegation
  NFSD: fix decode_cb_sequence4resok

8 years agopktgen: fix errata in show results
Daniel Turull [Wed, 9 Mar 2011 22:11:00 +0000]
pktgen: fix errata in show results

The units in show_results in pktgen were not correct.
The results are in usec but it was displayed nsec.

Reported-by: Jong-won Lee <ljw@handong.edu>
Signed-off-by: Daniel Turull <daniel.turull@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agotcp: ioctl type SIOCOUTQNSD returns amount of data not sent
Mario Schuknecht [Wed, 9 Mar 2011 22:08:09 +0000]
tcp: ioctl type SIOCOUTQNSD returns amount of data not sent

In contrast to SIOCOUTQ which returns the amount of data sent
but not yet acknowledged plus data not yet sent this patch only
returns the data not sent.

For various methods of live streaming bitrate control it may
be helpful to know how much data are in the tcp outqueue are
not sent yet.

Signed-off-by: Mario Schuknecht <m.schuknecht@dresearch.de>
Signed-off-by: Steffen Sledz <sledz@dresearch.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoipv4: Lookup multicast routes by rtable using helper.
David S. Miller [Wed, 9 Mar 2011 22:06:20 +0000]
ipv4: Lookup multicast routes by rtable using helper.

Create a common helper for this operation, since we do
it identically in three spots.

Suggested by Eric Dumazet.

Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog
Linus Torvalds [Wed, 9 Mar 2011 22:04:40 +0000]
Merge git://git./linux/kernel/git/wim/linux-2.6-watchdog

* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  watchdog: sbc_fitpc2_wdt, fix crash on systems without DMI_BOARD_NAME

8 years agoMerge branch 'for-2639-rc7/i2c-fixes' of git://git.fluff.org/bjdooks/linux
Linus Torvalds [Wed, 9 Mar 2011 22:03:59 +0000]
Merge branch 'for-2639-rc7/i2c-fixes' of git://git.fluff.org/bjdooks/linux

* 'for-2639-rc7/i2c-fixes' of git://git.fluff.org/bjdooks/linux:
  i2c-eg20t: include slab.h for memory allocations
  i2c-ocores: Fix pointer type mismatch error
  i2c-omap: Program I2C_WE on OMAP4 to enable i2c wakeup

8 years agoalpha: fix compile error from IRQ clean up
Matt Turner [Wed, 9 Mar 2011 16:15:13 +0000]
alpha: fix compile error from IRQ clean up

Signed-off-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoMerge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq
Linus Torvalds [Wed, 9 Mar 2011 22:01:42 +0000]
Merge branch 'fixes' of git://git./linux/kernel/git/davej/cpufreq

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq:
  [CPUFREQ] pcc-cpufreq: don't load driver if get_freq fails during init.

8 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc
Linus Torvalds [Wed, 9 Mar 2011 22:00:44 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/cjb/mmc

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc:
  mmc: fix CONFIG_MMC_UNSAFE_RESUME regression

8 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
Linus Torvalds [Wed, 9 Mar 2011 21:55:51 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
  nd->inode is not set on the second attempt in path_walk()
  unfuck proc_sysctl ->d_compare()
  minimal fix for do_filp_open() race

8 years agowatchdog: sbc_fitpc2_wdt, fix crash on systems without DMI_BOARD_NAME
Jiri Slaby [Mon, 28 Feb 2011 09:16:29 +0000]
watchdog: sbc_fitpc2_wdt, fix crash on systems without DMI_BOARD_NAME

Some systems don't provide DMI_BOARD_NAME in their DMI tables. Avoid
crash in such situations in fitpc2_wdt_init.

The fix is to check if the dmi_get_system_info return value is NULL.

The oops:
BUG: unable to handle kernel NULL pointer dereference at           (null)
IP: [<ffffffff81253ae6>] strstr+0x26/0xa0
PGD 3966e067 PUD 39605067 PMD 0
Oops: 0000 [#1] SMP
last sysfs file: /sys/devices/system/cpu/cpu1/cache/index2/shared_cpu_map
CPU 1
Modules linked in: ...
Pid: 1748, comm: modprobe Not tainted 2.6.37-22-default #1 /Bochs
RIP: 0010:[<ffffffff81253ae6>]  [<ffffffff81253ae6>] strstr+0x26/0xa0
RSP: 0018:ffff88003ad73f18  EFLAGS: 00010206
RAX: 0000000000000000 RBX: 00000000ffffffed RCX: 00000000ffffffff
RDX: ffffffffa003f4cc RSI: ffffffffa003f4c2 RDI: 0000000000000000
...
CR2: 0000000000000000 CR3: 000000003b7ac000 CR4: 00000000000006e0
...
Process modprobe (pid: 1748, threadinfo ffff88003ad72000, task ffff88002e6365c0)
Stack: ...
Call Trace:
 [<ffffffffa004201f>] fitpc2_wdt_init+0x1f/0x13c [sbc_fitpc2_wdt]
 [<ffffffff810002da>] do_one_initcall+0x3a/0x170
...
Code: f3 c3 0f 1f 00 80 3e 00 53 48 89 f8 74 1b 48 89 f2 0f 1f 40 00 48 83 c2 01 80 3a 00 75 f7 49 89 d0 48 89 f8 49 29 f0 75 02 5b c3 <80> 3f 00 74 0e 0f 1f 44 00 00 48 83 c0 01 80 38 00 75 f7 49 89

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

8 years agobonding: move procfs code into bond_procfs.c
Amerigo Wang [Sun, 6 Mar 2011 21:58:46 +0000]
bonding: move procfs code into bond_procfs.c

V2: Move #ifdef CONFIG_PROC_FS into bonding.h, as suggested by David.

bond_main.c is bloating, separate the procfs code out,
move them to bond_procfs.c

Signed-off-by: WANG Cong <amwang@redhat.com>
Reviewed-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoipv4: Fix erroneous uses of ifa_address.
David S. Miller [Wed, 9 Mar 2011 21:27:16 +0000]
ipv4: Fix erroneous uses of ifa_address.

In usual cases ifa_address == ifa_local, but in the case where
SIOCSIFDSTADDR sets the destination address on a point-to-point
link, ifa_address gets set to that destination address.

Therefore we should use ifa_local when we want the local interface
address.

There were two cases where the selection was done incorrectly:

1) When devinet_ioctl() does matching, it checks ifa_address even
   though gifconf correct reported ifa_local to the user

2) IN_DEV_ARP_NOTIFY handling sends a gratuitous ARP using
   ifa_address instead of ifa_local.

Reported-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agomac80211: update minstrel_ht sample rate when probe is set
Daniel Halperin [Wed, 9 Mar 2011 11:10:18 +0000]
mac80211: update minstrel_ht sample rate when probe is set

Waiting until the status is received can cause the same rate to be
probed multiple times consecutively.

Cc: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Daniel Halperin <dhalperi@cs.washington.edu>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agoath5k: restrict AR5K_TX_QUEUE_ID_DATA_MAX to reflect the [0,3] range
John W. Linville [Tue, 8 Mar 2011 21:36:00 +0000]
ath5k: restrict AR5K_TX_QUEUE_ID_DATA_MAX to reflect the [0,3] range

This just matches reality...

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Acked-by: Bob Copeland <me@bobcopeland.com>

8 years agonet/wireless: add COUNTRY to to regulatory device uevent
Scott James Remnant [Tue, 8 Mar 2011 18:45:30 +0000]
net/wireless: add COUNTRY to to regulatory device uevent

Regulatory devices issue change uevents to inform userspace of a need
to call the crda tool; however these can often be sent before udevd is
running, and were not previously included in the results of
udevadm trigger (which requests a new change event using the /uevent
attribute of the sysfs object).

Add a uevent function to the device type which includes the COUNTRY
information from the last request if it has yet to be processed, the
case of multiple requests is already handled in the code by checking
whether an unprocessed one is queued in the same manner and refusing
to queue a new one.

The existing udev rule continues to work as before.

Signed-off-by: Scott James Remnant <keybuk@google.com>
Acked-By: Kay Sievers <kay.sievers@vrfy.org>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agoieee80211: add IEEE80211_COUNTRY_STRING_LEN definition
Bing Zhao [Mon, 7 Mar 2011 19:14:23 +0000]
ieee80211: add IEEE80211_COUNTRY_STRING_LEN definition

and make use of it in wireless drivers

Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agomwl8k: use kcalloc instead of kmalloc & memset
Shan Wei [Tue, 8 Mar 2011 03:02:03 +0000]
mwl8k: use kcalloc instead of kmalloc & memset

Use kcalloc or kzalloc rather than the combination of kmalloc and memset.

Thanks coccicheck for detecting this.
(http://coccinelle.lip6.fr/)

Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agoPhonet: kill the ST-Ericsson pipe controller Kconfig
Rémi Denis-Courmont [Tue, 8 Mar 2011 22:44:13 +0000]
Phonet: kill the ST-Ericsson pipe controller Kconfig

This is now a run-time choice so that a single kernel can support both
old and new generation ISI modems. Support for manually enabling the
pipe flow is removed as it did not work properly, does not fit well
with the socket API, and I am not aware of any use at the moment.

Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoPhonet: support active connection without pipe controller on modem
Rémi Denis-Courmont [Tue, 8 Mar 2011 22:44:12 +0000]
Phonet: support active connection without pipe controller on modem

This provides support for newer ISI modems with no need for the
earlier experimental compile-time alternative choice. With this,
we can now use the same kernel and userspace with both types of
modems.

This also avoids confusing two different and incompatible state
machines, actively connected vs accepted sockets, and adds
connection response error handling (processing "SYN/RST" of sorts).

Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoPhonet: provide pipe socket option to retrieve the pipe identifier
Rémi Denis-Courmont [Tue, 8 Mar 2011 22:44:11 +0000]
Phonet: provide pipe socket option to retrieve the pipe identifier

User-space sometimes needs this information. In particular, the GPRS
context or the AT commands pipe setups may use the pipe handle as a
reference.

This removes the settable pipe handle with CONFIG_PHONET_PIPECTRLR.
It did not handle error cases correctly. Furthermore, the kernel
*could* implement a smart scheme for allocating handles (if ever
needed), but userspace really cannot.

Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoPhonet: allocate sock from accept syscall rather than soft IRQ
Rémi Denis-Courmont [Tue, 8 Mar 2011 22:44:10 +0000]
Phonet: allocate sock from accept syscall rather than soft IRQ

This moves most of the accept logic to process context like other
socket stacks do. Then we can use a few more common socket helpers
and simplify a bit.

Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>