12 years agoSELinux: Return correct context for SO_PEERSEC
Venkat Yekkirala [Wed, 8 Nov 2006 23:04:09 +0000]
SELinux: Return correct context for SO_PEERSEC

Fix SO_PEERSEC for tcp sockets to return the security context of
the peer (as represented by the SA from the peer) as opposed to the
SA used by the local/source socket.

Signed-off-by: Venkat Yekkirala <vyekkirala@TrustedCS.com>
Signed-off-by: James Morris <jmorris@namei.org>

12 years agoSELinux: Various xfrm labeling fixes
Venkat Yekkirala [Wed, 8 Nov 2006 23:03:44 +0000]
SELinux: Various xfrm labeling fixes

Since the upstreaming of the mlsxfrm modification a few months back,
testing has resulted in the identification of the following issues/bugs that
are resolved in this patch set.

1. Fix the security context used in the IKE negotiation to be the context
   of the socket as opposed to the context of the SPD rule.

2. Fix SO_PEERSEC for tcp sockets to return the security context of
   the peer as opposed to the source.

3. Fix the selection of an SA for an outgoing packet to be at the same
   context as the originating socket/flow.

The following would be the result of applying this patchset:

- SO_PEERSEC will now correctly return the peer's context.

- IKE deamons will receive the context of the source socket/flow
  as opposed to the SPD rule's context so that the negotiated SA
  will be at the same context as the source socket/flow.

- The SELinux policy will require one or more of the
  following for a socket to be able to communicate with/without SAs:

  1. To enable a socket to communicate without using labeled-IPSec SAs:

     allow socket_t unlabeled_t:association { sendto recvfrom }

  2. To enable a socket to communicate with labeled-IPSec SAs:

     allow socket_t self:association { sendto };
     allow socket_t peer_sa_t:association { recvfrom };

This Patch: Pass correct security context to IKE for use in negotiation

Fix the security context passed to IKE for use in negotiation to be the
context of the socket as opposed to the context of the SPD rule so that
the SA carries the label of the originating socket/flow.

Signed-off-by: Venkat Yekkirala <vyekkirala@TrustedCS.com>
Signed-off-by: James Morris <jmorris@namei.org>

12 years ago[BLUETOOTH] rfcomm endianness bug: param_mask is little-endian on the wire
Al Viro [Wed, 8 Nov 2006 08:28:44 +0000]
[BLUETOOTH] rfcomm endianness bug: param_mask is little-endian on the wire

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[BLUETOOTH]: rfcomm endianness annotations
Al Viro [Wed, 8 Nov 2006 08:28:19 +0000]
[BLUETOOTH]: rfcomm endianness annotations

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[BLUETOOTH]: bnep endianness annotations
Al Viro [Wed, 8 Nov 2006 08:27:57 +0000]
[BLUETOOTH]: bnep endianness annotations

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[BLUETOOTH] bnep endianness bug: filtering by packet type
Al Viro [Wed, 8 Nov 2006 08:27:36 +0000]
[BLUETOOTH] bnep endianness bug: filtering by packet type

<= and => don't work well on net-endian...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[IPV6]: ip6_output annotations
Al Viro [Wed, 8 Nov 2006 08:27:11 +0000]
[IPV6]: ip6_output annotations

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[NETFILTER]: trivial annotations
Al Viro [Wed, 8 Nov 2006 08:26:51 +0000]
[NETFILTER]: trivial annotations

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[AF_PACKET]: annotate
Al Viro [Wed, 8 Nov 2006 08:26:29 +0000]
[AF_PACKET]: annotate

Weirdness: the third argument of socket() is net-endian
here.  Oh, well - it's documented in packet(7).

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[LLC]: anotations
Al Viro [Wed, 8 Nov 2006 08:26:05 +0000]
[LLC]: anotations

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[IPV6]: annotate inet6_csk_search_req()
Al Viro [Wed, 8 Nov 2006 08:25:41 +0000]
[IPV6]: annotate inet6_csk_search_req()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[IPV6]: flowlabels are net-endian
Al Viro [Wed, 8 Nov 2006 08:25:17 +0000]
[IPV6]: flowlabels are net-endian

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[INET]: annotate inet_ecn.h
Al Viro [Wed, 8 Nov 2006 08:24:47 +0000]
[INET]: annotate inet_ecn.h

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[NET]: annotate dsfield.h
Al Viro [Wed, 8 Nov 2006 08:24:26 +0000]
[NET]: annotate dsfield.h

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[XFRM]: annotate ->new_mapping()
Al Viro [Wed, 8 Nov 2006 08:24:06 +0000]
[XFRM]: annotate ->new_mapping()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[AF_KEY]: annotate
Al Viro [Wed, 8 Nov 2006 08:23:42 +0000]
[AF_KEY]: annotate

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[IPV4]: encapsulation annotations
Al Viro [Wed, 8 Nov 2006 08:23:14 +0000]
[IPV4]: encapsulation annotations

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[SUNRPC]: annotate hash_ip()
Al Viro [Wed, 8 Nov 2006 08:22:34 +0000]
[SUNRPC]: annotate hash_ip()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[IPV6]: annotate ipv6 mcast
Al Viro [Wed, 8 Nov 2006 08:22:08 +0000]
[IPV6]: annotate ipv6 mcast

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[IPV6]: annotate struct frag_hdr
Al Viro [Wed, 8 Nov 2006 08:21:46 +0000]
[IPV6]: annotate struct frag_hdr

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[IPV6]: annotate icmpv6 headers
Al Viro [Wed, 8 Nov 2006 08:21:21 +0000]
[IPV6]: annotate icmpv6 headers

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[IPV6]: 'info' argument of ipv6 ->err_handler() is net-endian
Al Viro [Wed, 8 Nov 2006 08:21:01 +0000]
[IPV6]: 'info' argument of ipv6 ->err_handler() is net-endian

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[XFRM]: misc annotations
Al Viro [Wed, 8 Nov 2006 08:20:21 +0000]
[XFRM]: misc annotations

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[IPV6]: annotate inet6_hashtables
Al Viro [Wed, 8 Nov 2006 08:20:00 +0000]
[IPV6]: annotate inet6_hashtables

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[NET]: ipconfig and nfsroot annotations
Al Viro [Wed, 8 Nov 2006 08:19:38 +0000]
[NET]: ipconfig and nfsroot annotations

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[TIPC]: endianness annotations
Al Viro [Wed, 8 Nov 2006 08:19:09 +0000]
[TIPC]: endianness annotations

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[IPV6] NDISC: Calculate packet length correctly for allocation.
David S. Miller [Sun, 3 Dec 2006 05:00:06 +0000]
[IPV6] NDISC: Calculate packet length correctly for allocation.

MAX_HEADER does not include the ipv6 header length in it,
so we need to add it in explicitly.

With help from YOSHIFUJI Hideaki.

Signed-off-by: David S. Miller <davem@davemloft.net>

12 years agoMerge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik...
Linus Torvalds [Sat, 2 Dec 2006 23:08:32 +0000]
Merge branch 'upstream-linus' of /linux/kernel/git/jgarzik/netdev-2.6

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (118 commits)
  [netdrvr] skge: build fix
  [PATCH] NetXen: driver cleanup, removed unnecessary __iomem type casts
  [PATCH] PHY: Add support for configuring the PHY connection interface
  [PATCH] chelesio: transmit locking (plus bug fix).
  [PATCH] chelsio: statistics improvement
  [PATCH] chelsio: add MSI support
  [PATCH] chelsio: use standard CRC routines
  [PATCH] chelsio: cleanup pm3393 code
  [PATCH] chelsio: add 1G swcixw aupport
  [PATCH] chelsio: add support for other 10G boards
  [PATCH] chelsio: remove unused mutex
  [PATCH] chelsio: use kzalloc
  [PATCH] chelsio: whitespace fixes
  [PATCH] amd8111e use standard CRC lib
  [PATCH] sky2: msi enhancements.
  [PATCH] sky2: kfree_skb_any needed
  [PATCH] sky2: fixes for Yukon EC_U chip revisions
  [PATCH] sky2: add Dlink 560SX id
  [PATCH] sky2: receive error handling fix
  [PATCH] skge: don't clear MC state on link down
  ...

12 years agoMerge branch 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/drzeus/mmc
Linus Torvalds [Sat, 2 Dec 2006 16:29:04 +0000]
Merge branch 'for-linus' of /linux/kernel/git/drzeus/mmc

* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/drzeus/mmc:
  mmc: correct request error handling
  mmc: Flush block queue when removing card
  mmc: sdhci high speed support
  mmc: Support for high speed SD cards
  mmc: Fix mmc_delay() function
  mmc: Add support for mmc v4 wide-bus modes
  [PATCH] mmc: Add support for mmc v4 high speed mode
  trivial change for mmc/Kconfig: MMC_PXA does not mean only PXA255
  Make general code cleanups
  Add MMC_CAP_{MULTIWRITE,BYTEBLOCK} flags
  Platform device error handling cleanup
  Move register definitions away from the header file
  Change OMAP_MMC_{READ,WRITE} macros to use the host pointer
  Replace base with virt_base and phys_base
  mmc: constify mmc_host_ops vectors
  mmc: remove kernel_thread()

12 years agoMerge branch 'release' of master.kernel.org:/pub/scm/linux/kernel/git/lenb/linux...
Linus Torvalds [Sat, 2 Dec 2006 16:28:28 +0000]
Merge branch 'release' of /linux/kernel/git/lenb/linux-acpi-2.6

* 'release' of master.kernel.org:/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  Revert "ACPI: SCI interrupt source override"

12 years ago[netdrvr] skge: build fix
Jeff Garzik [Sat, 2 Dec 2006 12:14:39 +0000]
[netdrvr] skge: build fix

Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years agoRevert "ACPI: SCI interrupt source override"
Len Brown [Sat, 2 Dec 2006 07:27:46 +0000]
Revert "ACPI: SCI interrupt source override"

This reverts commit 281ea49b0c294649a6de47a6f8fbe5611137726b,
which broke ACPI Interrupt source overrides that move
the SCI from one IRQ in PIC mode to another in IOAPIC mode.

If the SCI shared an interrupt line with another device,
this would result in a "irq 18: nobody cared" type failure.

http://bugzilla.kernel.org/show_bug.cgi?id=7601

Signed-off-by: Len Brown <len.brown@intel.com>

12 years ago[PATCH] NetXen: driver cleanup, removed unnecessary __iomem type casts
Amit S. Kale [Fri, 1 Dec 2006 13:36:22 +0000]
[PATCH] NetXen: driver cleanup, removed unnecessary __iomem type casts

Signed-off-by: Amit S. Kale <amitkale@netxen.com>

 netxen_nic.h         |   38 ++++++++------------------------------
 netxen_nic_ethtool.c |    5 ++---
 netxen_nic_hw.c      |   12 +++++-------
 netxen_nic_main.c    |    8 +++-----
 4 files changed, 18 insertions(+), 45 deletions(-)
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years ago[PATCH] PHY: Add support for configuring the PHY connection interface
Andy Fleming [Fri, 1 Dec 2006 18:01:06 +0000]
[PATCH] PHY: Add support for configuring the PHY connection interface

Most PHYs connect to an ethernet controller over a GMII or MII
interface.  However, a growing number are connected over
different interfaces, such as RGMII or SGMII.

The ethernet driver will tell the PHY what type of connection it
is by setting it manually, or passing it in through phy_connect
(or phy_attach).

Changes include:
* Updates to documentation
* Updates to PHY Lib consumers
* Changes to PHY Lib to add interface support
* Some minor changes to whitespace in phy.h
* gianfar driver now detects interface and passes appropriate
  value to PHY Lib
Signed-off-by: Andrew Fleming <afleming@freescale.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years ago[PATCH] chelesio: transmit locking (plus bug fix).
Stephen Hemminger [Sat, 2 Dec 2006 00:36:22 +0000]
[PATCH] chelesio: transmit locking (plus bug fix).

If transmit lock is contended on, then push return code back
and retry at higher level.

Bugfix: If buffer is reallocated because of lack of headroom
and the send is blocked, then drop packet. This is necessary
because caller would end up requeuing a freed skb.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years ago[PATCH] chelsio: statistics improvement
Stephen Hemminger [Sat, 2 Dec 2006 00:36:21 +0000]
[PATCH] chelsio: statistics improvement

Cleanup statistics management:
 * Get rid of duplicate or unused statistics
 * Convert high volume stats to per-cpu and 64 bit

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years ago[PATCH] chelsio: add MSI support
Stephen Hemminger [Sat, 2 Dec 2006 00:36:20 +0000]
[PATCH] chelsio: add MSI support

Using MSI can avoid sharing IRQ and associated overhead.
Tested on PCI-X.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years ago[PATCH] chelsio: use standard CRC routines
Stephen Hemminger [Sat, 2 Dec 2006 00:36:19 +0000]
[PATCH] chelsio: use standard CRC routines

Replace driver crc calculation with existing library.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years ago[PATCH] chelsio: cleanup pm3393 code
Stephen Hemminger [Sat, 2 Dec 2006 00:36:18 +0000]
[PATCH] chelsio: cleanup pm3393 code

Replace macro with function for updating RMON values

Cleanups:
* remove unused enum's
* Fix comment format

Signed-off-by: Stephen HEmminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years ago[PATCH] chelsio: add 1G swcixw aupport
Stephen Hemminger [Sat, 2 Dec 2006 00:36:17 +0000]
[PATCH] chelsio: add 1G swcixw aupport

Add support for 1G versions of Chelsio devices.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years ago[PATCH] chelsio: add support for other 10G boards
Stephen Hemminger [Sat, 2 Dec 2006 00:36:16 +0000]
[PATCH] chelsio: add support for other 10G boards

Add support for other versions of the 10G Chelsio boards.
This is basically a port of the vendor driver with the
TOE features removed.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years ago[PATCH] chelsio: remove unused mutex
Stephen Hemminger [Sat, 2 Dec 2006 00:36:15 +0000]
[PATCH] chelsio: remove unused mutex

This mutex is unused in current (non TOE) code.

Signed-off-by: Stephen Hemminger<shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years ago[PATCH] chelsio: use kzalloc
Stephen Hemminger [Sat, 2 Dec 2006 00:36:14 +0000]
[PATCH] chelsio: use kzalloc

Use kzalloc in several places.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years ago[PATCH] chelsio: whitespace fixes
Stephen Hemminger [Sat, 2 Dec 2006 00:36:13 +0000]
[PATCH] chelsio: whitespace fixes

Fix indentation and blank/tab issues.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years ago[PATCH] amd8111e use standard CRC lib
Stephen Hemminger [Sat, 2 Dec 2006 00:10:50 +0000]
[PATCH] amd8111e use standard CRC lib

I noticed this driver (and several others) reinvent their own copy of the
existing CRC library. Don't have the hardware, but tested by extracting
code and comparing result.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years ago[PATCH] sky2: msi enhancements.
Stephen Hemminger [Fri, 1 Dec 2006 22:29:37 +0000]
[PATCH] sky2: msi enhancements.

If using Message Signaled Interrupts (MSI) then the IRQ will never
be shared. Don't call pci_disable_msi() unless using MSI.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years ago[PATCH] sky2: kfree_skb_any needed
Stephen Hemminger [Fri, 1 Dec 2006 22:29:36 +0000]
[PATCH] sky2: kfree_skb_any needed

It is possible for the sky2 driver NAPI poll routine to be called with
IRQ's disabled if netpoll is trying to make space in the tx queue. This
is an obscure path, but if it happens, the kfree_skb needs to happen
via softirq. Calling kfree_skb with IRQ's disabled is a not allowed.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years ago[PATCH] sky2: fixes for Yukon EC_U chip revisions
Stephen Hemminger [Fri, 1 Dec 2006 22:29:35 +0000]
[PATCH] sky2: fixes for Yukon EC_U chip revisions

Update workarounds for 88E803X based on the latest SysKonnect vendor
driver version (8.41). Tested on EC_U rev A1, only.
These up the receive performance.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years ago[PATCH] sky2: add Dlink 560SX id
Stephen Hemminger [Fri, 1 Dec 2006 22:29:34 +0000]
[PATCH] sky2: add Dlink 560SX id

Add new PCI ID for DLink 560SX.
This from the latest SysKonnect vendor driver (version 8.41).

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years ago[PATCH] sky2: receive error handling fix
Stephen Hemminger [Fri, 1 Dec 2006 22:29:33 +0000]
[PATCH] sky2: receive error handling fix

If sky2 detects out of memory, or gets a bad frame, it reuses the same receive
buffer, but forgets to poke the hardware. This could lead to the receiver
getting stuck if there were lots of errors.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years ago[PATCH] skge: don't clear MC state on link down
Stephen Hemminger [Fri, 1 Dec 2006 19:41:08 +0000]
[PATCH] skge: don't clear MC state on link down

I would rather fix Andy's problem by not clearing
multicast information on link down.

Also, add code to restore multicast state after ethtool phy reset.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years ago[PATCH] mv643xx_eth: fix unbalanced parentheses in macros
Mariusz Kozlowski [Thu, 30 Nov 2006 11:27:00 +0000]
[PATCH] mv643xx_eth: fix unbalanced parentheses in macros

Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years agodrivers/net/tulip/dmfe: support basic carrier detection
Samuel Thibault [Thu, 30 Nov 2006 12:11:24 +0000]
drivers/net/tulip/dmfe: support basic carrier detection

Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years ago[PATCH] netdev: don't allow register_netdev with blank name
Stephen Hemminger [Fri, 17 Nov 2006 21:41:58 +0000]
[PATCH] netdev: don't allow register_netdev with blank name

This bit of old backwards compatibility cruft can be removed in 2.6.20.
If there is still an device that calls register_netdev()
with a zero or blank name, it will get -EINVAL from register_netdevice().

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years ago[PATCH] netxen: uses PCI
Randy Dunlap [Fri, 17 Nov 2006 05:39:11 +0000]
[PATCH] netxen: uses PCI

drivers/built-in.o: In function `netxen_nic_remove':
netxen_nic_main.c:(.text+0x31b4d): undefined reference to `pci_disable_msi'
netxen_nic_main.c:(.text+0x31b8e): undefined reference to `pci_release_regions'
drivers/built-in.o: In function `netxen_init_module':
netxen_nic_main.c:(.init.text+0x3f17): undefined reference to `pci_module_init'
make: *** [.tmp_vmlinux1] Error 1

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years ago[PATCH] chelsio: use kzalloc
Stephen Hemminger [Sat, 18 Nov 2006 01:01:52 +0000]
[PATCH] chelsio: use kzalloc

Use kzalloc() in chelsio driver.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years ago[PATCH] chelsio: use __netif_rx_schedule_prep
Stephen Hemminger [Sat, 18 Nov 2006 01:00:34 +0000]
[PATCH] chelsio: use __netif_rx_schedule_prep

The chelsio driver can use __netif_rx_schedule_prep instead of it's own
test_and_set inline.  Applies after the previous 4 patches.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years ago[PATCH] chelsio: free_netdev
Stephen Hemminger [Fri, 17 Nov 2006 19:25:23 +0000]
[PATCH] chelsio: free_netdev

Network devices need to be free'd with free_netdev() not kfree()
otherwise the kernel will panic if an application has /sys/class/net/ethX/value
open and reads it.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years ago[PATCH] chelsio: procectomy
Stephen Hemminger [Fri, 17 Nov 2006 19:23:41 +0000]
[PATCH] chelsio: procectomy

Complete removal of proc stuff from chelsio. The orignal driver had a debug
proc interface, but not all the code got removed.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years ago[PATCH] chelsio: whitespace cleanup
Stephen Hemminger [Fri, 17 Nov 2006 19:21:22 +0000]
[PATCH] chelsio: whitespace cleanup

Whitespace cleanups.  Replace leading spaces with tabs and fix indentation

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years ago[PATCH] chelsio: remove leftover code
Stephen Hemminger [Fri, 17 Nov 2006 19:21:33 +0000]
[PATCH] chelsio: remove leftover code

The chelsio network driver has some extra ifdef's that got in because the
driver was originally based on code that worked on 2.4 as well as 2.6.
This patch removes the dead code.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years ago[PATCH] Adapt ucc_geth driver to use new of_platform_device support
Kim Phillips [Wed, 15 Nov 2006 18:29:35 +0000]
[PATCH] Adapt ucc_geth driver to use new of_platform_device support

Include of_platform header, and use
new of_[un]register_platform_driver() fns.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years ago[PATCH] sundance: use NULL for pointer
Randy Dunlap [Wed, 29 Nov 2006 21:15:17 +0000]
[PATCH] sundance: use NULL for pointer

Use NULL instead of 0 for pointers (cures sparse warnings).

drivers/net/sundance.c:1106:16: warning: Using plain integer as NULL pointer
drivers/net/sundance.c:1652:16: warning: Using plain integer as NULL pointer

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years ago[PATCH] NetXen: temp monitoring, newer firmware support, mm footprint reduction
Amit S. Kale [Wed, 29 Nov 2006 17:00:10 +0000]
[PATCH] NetXen: temp monitoring, newer firmware support, mm footprint reduction

NetXen: 1G/10G Ethernet Driver updates
- Temparature monitoring and device control
- Memory footprint reduction
- Driver changes to support newer version of firmware

Signed-off-by: Amit S. Kale <amitkale@netxen.com>

 netxen_nic.h          |  165 ++++++++++++++++++++++++++++++++--
 netxen_nic_ethtool.c  |   89 ++++++++++++------
 netxen_nic_hdr.h      |   71 +++++++++++++-
 netxen_nic_hw.c       |  206 +++++++++++++++++++++++++++++--------------
 netxen_nic_hw.h       |    8 +
 netxen_nic_init.c     |  239 +++++++++++++++++++++++++++++++++++++++++---------
 netxen_nic_ioctl.h    |   12 +-
 netxen_nic_isr.c      |   54 +++++------
 netxen_nic_main.c     |  121 +++++++++++++++++--------
 netxen_nic_niu.c      |  172 +++++++++++++++++++++++++++--------
 netxen_nic_phan_reg.h |   24 ++++-
 11 files changed, 891 insertions(+), 270 deletions(-)
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years ago[PATCH] NetXen: Fixed /sys mapping between device and driver
Amit S. Kale [Wed, 29 Nov 2006 16:58:11 +0000]
[PATCH] NetXen: Fixed /sys mapping between device and driver

Signed-off-by: Amit S. Kale <amitkale@netxen.com>

 netxen_nic_main.c |    3 ++-
 1 files changed, 2 insertions(+), 1 deletion(-)
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years ago[PATCH] softmac: reduce scan debug output
Larry Finger [Sun, 26 Nov 2006 00:30:03 +0000]
[PATCH] softmac: reduce scan debug output

When scanning in debug mode, softmac is very chatty in that it puts
3 lines in the logs for each time it scans. This patch has only one
line containing all the information previously reported.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

12 years ago[PATCH] ieee80211: Provide generic get_stats implementation
Daniel Drake [Wed, 22 Nov 2006 03:15:46 +0000]
[PATCH] ieee80211: Provide generic get_stats implementation

bcm43xx and ipw2100 currently duplicate the same simplistic get_stats
handler.  Additionally, zd1211rw requires the same handler to fix a
bug where all stats are reported as 0.

This patch adds a generic implementation to the ieee80211 layer,
which drivers are free to override.

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

12 years ago[PATCH] zd1211rw: Use softmac ERP handling functionality
Daniel Drake [Wed, 22 Nov 2006 00:06:48 +0000]
[PATCH] zd1211rw: Use softmac ERP handling functionality

This adds zd1211rw driver support for the softmac functionality I
added a while back. We now obey changes in basic rates, use short
preamble if it is available (but long if the AP says it's not),
and send self-CTS in the proper situations.

Locking fixed and improved by Ulrich Kunitz.

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

12 years ago[PATCH] zd1211rw: Rename cs_rate to zd_rate
Daniel Drake [Wed, 22 Nov 2006 00:06:38 +0000]
[PATCH] zd1211rw: Rename cs_rate to zd_rate

These controlset rate constants are also applicable in places outside
the controlset, such as in the RTS/CTS control register.

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

12 years ago[PATCH] zd1211rw: Allow channels 1-13 in Japan
Daniel Drake [Wed, 22 Nov 2006 00:06:32 +0000]
[PATCH] zd1211rw: Allow channels 1-13 in Japan

Eric Goff found that he could not use his ZD1211 device which is
programmed for the Japan regulatory domain. It turns out that ZyDAS
deviate from the spec here: they do not use the newer Japan region code
(0x41) but their drivers do operate as if the newer Japan legal
frequency range is in effect.

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

12 years ago[PATCH] zd1211rw: Optimized handling of zero length entries in length info
Ulrich Kunitz [Wed, 22 Nov 2006 00:06:19 +0000]
[PATCH] zd1211rw: Optimized handling of zero length entries in length info

There are a high number of split USB transactions, which contain
only one packet but have a length info field. This patch optimizes
this code by stopping parsing the length info structure if a zero
length field is encountered.

Signed-off-by: Ulrich Kunitz <kune@deine-taler.de>
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

12 years ago[PATCH] zd1211rw: cleanups
Ulrich Kunitz [Wed, 22 Nov 2006 00:05:53 +0000]
[PATCH] zd1211rw: cleanups

Bit-field constants in zd_chip.h are now defined using a shift expression.
The value 0x08 is now (1 << 3). The fix is intended to improve readability.

Remove misleading comment in zd_mac.c: The function already returns -EPERM
in managed mode (IW_MODE_INFRA).

Remove unused code in zd_mac.c: The unused code intended for debugging
rx_status values is no longer useful.

Added dump_stack() to ZD_ASSERT macro: Output of the stack helps to debug
assertions. Keep in mind that the ZD_ASSERT() macro only results in code,
if DEBUG is defined.

Improved comments for filter_rx()

zd_usb.c: Added driver name to module init and exit functions

Signed-off-by: Ulrich Kunitz <kune@deine-taler.de>
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

12 years ago[PATCH] zd1211rw: Remove IW_FREQ_AUTO support
Daniel Drake [Wed, 22 Nov 2006 00:05:30 +0000]
[PATCH] zd1211rw: Remove IW_FREQ_AUTO support

http://bugzilla.kernel.org/show_bug.cgi?id=7399

zd1211rw's support for IW_FREQ_AUTO is broken: when specified, the driver
tries to change to a channel specified in an uninitialized integer. As
IW_FREQ_AUTO is hard to implement properly, the solution (at least for now)
is to drop support for it and start ignoring the flags like all other wireless
drivers do.

This has the added advantage that kismet also starts working with zd1211rw,
even though kismet requesting IW_FREQ_AUTO is also a bug (fixed in their svn)

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

12 years ago[PATCH] Check ieee80211softmac_auth_resp kmalloc result
Arnaldo Carvalho de Melo [Tue, 21 Nov 2006 03:26:49 +0000]
[PATCH] Check ieee80211softmac_auth_resp kmalloc result

And use kmemdup and kzalloc where applicable

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

12 years ago[PATCH] zd1211rw: Add ID for Belkin F5D7050 v4000
Daniel Drake [Fri, 17 Nov 2006 00:26:40 +0000]
[PATCH] zd1211rw: Add ID for Belkin F5D7050 v4000

zd1211b chip 050d:705c v4810 high 00-17-3f AL2230_RF pa0 g--N

Tested by Bryan Barnard

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

12 years ago[PATCH] zd1211rw: Add ID for Planex GW-US54Mini
Daniel Drake [Fri, 17 Nov 2006 00:13:48 +0000]
[PATCH] zd1211rw: Add ID for Planex GW-US54Mini

zd1211 chip 14ea:ab13 v4330 high 00-90-cc AL2230_RF pa0 g---

Tested by Tetsuya Yatagai.

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

12 years ago[PATCH] prism54: correct overly aggressive check of return from pci_set_mwi
John W. Linville [Wed, 15 Nov 2006 01:08:53 +0000]
[PATCH] prism54: correct overly aggressive check of return from pci_set_mwi

Failure of pci_set_mwi should not be considered a fatal error.

Signed-off-by: John W. Linville <linville@tuxdriver.com>

12 years ago[PATCH] bcm43xx: correct "Move IV/ICV stripping into ieee80211_rx"
Larry Finger [Wed, 8 Nov 2006 17:04:49 +0000]
[PATCH] bcm43xx: correct "Move IV/ICV stripping into ieee80211_rx"

In the patch sent by Daniel Drake under the title "[PATCH] ieee80211: Move
IV/ICV stripping into ieee80211_rx", a needed line was accidentally removed.

(NOTE: I'm pretty sure this was my fault, not Daniel's. -- JWL)

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

12 years agoRevert "[PATCH] Add support for Marvell 88e1111S and 88e1145"
Jeff Garzik [Tue, 14 Nov 2006 16:46:41 +0000]
Revert "[PATCH] Add support for Marvell 88e1111S and 88e1145"

This reverts commit 477c517903d57047150b01608149e02c6e9d83dd.

This patch depended on something that was not yet committed.

12 years ago[PATCH] Atmel MACB ethernet driver
Haavard Skinnemoen [Thu, 9 Nov 2006 13:51:17 +0000]
[PATCH] Atmel MACB ethernet driver

Driver for the Atmel MACB on-chip ethernet module.

Tested on AVR32/AT32AP7000/ATSTK1000. I've heard rumours that it works
with AT91SAM9260 as well, and it may be possible to share some code with
the at91_ether driver for AT91RM9200.

Hardware documentation can be found in the AT32AP7000 data sheet,
which can be downloaded from

http://www.atmel.com/dyn/products/datasheets.asp?family_id=682

Changes since previous version:
  * Probe for PHY ID instead of depending on it being provided through
    platform_data.
  * Grab initial ethernet address from the MACB registers instead
    of depending on platform_data.
  * Set MII/RMII mode correctly.

These changes are mostly about making the driver more compatible with
the at91 infrastructure.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years ago[PATCH] WAN: DSCC4 driver requires generic HDLC
Krzysztof Halasa [Mon, 13 Nov 2006 18:48:54 +0000]
[PATCH] WAN: DSCC4 driver requires generic HDLC

Another thing, reported recently to me by several people - DSCC4 WAN
driver now (and perhaps for the last couple of years+) requires the
generic HDLC. I've fixed the Kconfig and moved the DSCC4 option
under CONFIG_HDLC so it's consistent visually.

Signed-off-by: Krzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years ago[PATCH] Add tsi108/9 On Chip Ethernet device driver support
Zang Roy-r61911 [Thu, 9 Nov 2006 03:49:13 +0000]
[PATCH] Add tsi108/9 On Chip Ethernet device driver support

Add tsi108/9 on chip Ethernet controller driver support.

The driver code collects the feedback of previous posting form the mailing
list and gives the update.

MPC7448HPC2 platform in arch/powerpc uses tsi108 bridge.

The following is a brief description of the Ethernet controller:

The Tsi108/9 Ethernet Controller connects Switch Fabric to two independent
Gigabit Ethernet ports,E0 and E1.  It uses a single Management interface to
manage the two physical connection devices (PHYs).  Each Ethernet port has
its own statistics monitor that tracks and reports key interface
statistics.  Each port supports a 256-entry hash table for address
filtering.  In addition, each port is bridged to the Switch Fabric through
a 2-Kbyte transmit FIFO and a 4-Kbyte Receive FIFO.

Each Ethernet port also has a pair of internal Ethernet DMA channels to
support the transmit and receive data flows.  The Ethernet DMA channels use
descriptors set up in memory, the memory map of the device, and access via
the Switch Fabric.  The Ethernet Controller’s DMA arbiter handles
arbitration for the Switch Fabric.  The Controller also has a register bus
interface for register accesses and status monitor control.

The PMD (Physical Media Device) interface operates in MII, GMII, or TBI
modes.  The MII mode is used for connecting with 10 or 100 Mbit/s PMDs.
The GMII and TBI modes are used to connect with Gigabit PMDs.  Internal
data flows to and from the Ethernet Controller through the Switch Fabric.
Each

Ethernet port uses its transmit and receive DMA channels to manage data
flows through buffer descriptors that are predefined by the system (the
descriptors can exist anywhere in the system memory map).  These
descriptors are data structures that point to buffers filled with data
ready to transmit over Ethernet, or they point to empty buffers ready to
receive data from Ethernet.

Signed-off-by: Alexandre Bounine <Alexandre.Bounine@tundra.com>
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years ago[PATCH] sundance: solve host error problem in low performance embedded system when...
Jesse Huang [Thu, 9 Nov 2006 03:49:12 +0000]
[PATCH] sundance: solve host error problem in low performance embedded system when continune down and up

Solve host error problem in low performance embedded system when continune
down and up.  It will cause IP100A DMA TargetAbort.  So we need more safe
process to up and down IP100A with wait hardware completely stop and software
cur_tx/ dirty_tx/cur_task/last_tx be clear.

Signed-off-by: Jesse Huang <jesse@icplus.com.tw>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years agoe1000 linkage fix
Andrew Morton [Tue, 14 Nov 2006 15:35:03 +0000]
e1000 linkage fix

ia64:

 drivers/built-in.o(.text+0xd9a72): In function `e1000_xmit_frame':
 : undefined reference to `csum_ipv6_magic'

Cc: Auke Kok <auke-jan.h.kok@intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years ago[PATCH] Add support for Marvell 88e1111S and 88e1145
Andy Fleming [Wed, 8 Nov 2006 06:11:29 +0000]
[PATCH] Add support for Marvell 88e1111S and 88e1145

This patch requires the new support for configurable PHY
interfaces.

Changes include:
* New support for 88e1145
* New support for 88e111s
* Fixing 88e1101 driver to not match non-88e1101 PHYs
* Increases in feature support across Marvell PHY product line
* Fixes a bunch of whitespace issues found by Lindent

Signed-off-by: Andrew Fleming <afleming@freescale.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years ago[PATCH] add netpoll support for gianfar: respin
Vitaly Wool [Tue, 7 Nov 2006 10:27:02 +0000]
[PATCH] add netpoll support for gianfar: respin

The patch inlined below adds NET_POLL_CONTROLLER support for gianfar network driver, slightly modified wrt the comments from Andy Fleming.

 drivers/net/gianfar.c |   33 +++++++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

Signed-off-by: Vitaly Wool <vwool@ru.mvista.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years ago[PATCH] wireless: clean-up some "check return code" warnings
John W. Linville [Wed, 8 Nov 2006 01:53:48 +0000]
[PATCH] wireless: clean-up some "check return code" warnings

Clean-up some warnings from missing return code checks, mostly from
calling pci_enable_device during a PCI resume.

Signed-off-by: John W. Linville <linville@tuxdriver.com>

12 years ago[PATCH] ieee80211softmac: fix verbosity when debug disabled
Larry Finger [Sat, 4 Nov 2006 19:29:50 +0000]
[PATCH] ieee80211softmac: fix verbosity when debug disabled

SoftMAC contains a number of debug-type messages that continue to print
even when debugging is turned off. This patch substitutes dprintkl for
printkl for those lines.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

12 years ago[PATCH] bcm43xx: Remove useless core enable/disable messages
Larry Finger [Fri, 3 Nov 2006 03:56:52 +0000]
[PATCH] bcm43xx: Remove useless core enable/disable messages

In the softmac version of bcm43xx, the core scan logs whether each core is
enabled or disabled. This information is useless as one of the next steps
is to enable all cores. This patch removes this output from the log.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

12 years ago[PATCH] bcm43xx: remove badness variable and related routine
Larry Finger [Thu, 2 Nov 2006 00:11:18 +0000]
[PATCH] bcm43xx: remove badness variable and related routine

When the periodic work function in bcm43xx was converted for voluntary preemption
to reduce latency, a new function was created to estimate the "badness" of
each step, and this quantity was used to determine if preemption should be
enabled when periodic work was undertaken. This concept was quite useful
while debugging of periodic work was in progress. Now that this routine
seems to be working correctly, it is time to simplify the code. This
patch keeps the functionality intact, but simplifies the code.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

12 years ago[netdrvr] netxen: build fixes
Jeff Garzik [Tue, 7 Nov 2006 10:12:16 +0000]
[netdrvr] netxen: build fixes

Most contributed and Signed-off-by: Andrew Morton <akpm@osdl.org>
with some from me as well.

Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years ago[PATCH] sundance: correct initial and close hardware step.
Jesse Huang [Fri, 20 Oct 2006 21:42:13 +0000]
[PATCH] sundance: correct initial and close hardware step.

Correct initial and close hardware step.  In some embedded system down and up
IP100A will cause DMA crash.  We add some for safe down and up IP100A.

Signed-off-by: Jesse Huang <jesse@icplus.com.tw>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years ago[PATCH] Fixed a number of bugs in the PHY Layer
Andy Fleming [Mon, 16 Oct 2006 21:19:17 +0000]
[PATCH] Fixed a number of bugs in the PHY Layer

* genphy_update_link is now exported
* Added a fix from ncase@xes-inc.com which changes forcing so it
  only updates the link.  Otherwise, it never tries the lower
  values, since it is always overwriting the speed/duplex values
  with the current ones, rather than the intended ones.
* Fixed a bug where bringing up a PHY with no link caused it to
  timeout, and enter forcing mode.  Once in forcing mode,
  plugging in the link didn't autonegotiate.  Now the AN state
  detects the lack of link, and enters the NO_LINK state.  AN
  only times out if the link is up and AN fails
* Cleaned up the PHY_AN case, reducing one level of indentation
  for the timeout code.

Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years ago[PATCH] subdance: fix TX Pause bug (reset_tx, intr_handler)
Jesse Huang [Fri, 20 Oct 2006 21:42:11 +0000]
[PATCH] subdance: fix TX Pause bug (reset_tx, intr_handler)

Fix TX Pause bug (reset_tx, intr_handler).  When MaxCollisions occurred, need
to re-enable Tx.  But just after re-enable, MaxCollisions maybe occurred again
and with TxStatusOverflow.  This will cause driver can't check new
MaxCollisions to re-enable Tx again, because TxStatusOverflow.  For this
reason, after re-enable Tx, we need to make sure Tx was actually enabled.

Signed-off-by: Jesse Huang <jesse@icplus.com.tw>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years ago[PATCH] sundance: remove TxStartThresh and RxEarlyThresh
Jesse Huang [Fri, 20 Oct 2006 21:42:05 +0000]
[PATCH] sundance: remove TxStartThresh and RxEarlyThresh

For patent issue need to remove TxStartThresh and RxEarlyThresh.  This patent
is cut-through patent.  If use this function, Tx will start to transmit after
few data be move in to Tx FIFO.  We are not allow to use those function in
DFE530/DFE550/DFE580/DL10050/IP100/IP100A.  It will decrease a little
performance.

Signed-off-by: Jesse Huang <jesse@icplus.com.tw>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years ago[PATCH] network: pcnet_cs: remove the code to change the E8390_CMD register from...
Komuro [Sun, 15 Oct 2006 01:08:00 +0000]
[PATCH] network: pcnet_cs: remove the code to change the E8390_CMD register from ei_watchdog()

Remove the code to change the E8390_CMD register from ei_watchdog().
The 8390-page is always 0 outside the spin_lock.

Signed-off-by: komurojun-mbn@nifty.com
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years ago[PATCH] forcedeth: add support for new mcp67 device
Ayaz Abdulla [Mon, 6 Nov 2006 08:43:40 +0000]
[PATCH] forcedeth: add support for new mcp67 device

Add support for the new mcp67 device into forcedeth.

Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years ago[PATCH] forcedeth: add new NVIDIA pci ids
Ayaz Abdulla [Mon, 6 Nov 2006 08:43:39 +0000]
[PATCH] forcedeth: add new NVIDIA pci ids

Add pci device ids for the NVIDIA MCP67 chip.

Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years ago[PATCH] forcedeth: add recoverable error support
Ayaz Abdulla [Mon, 30 Oct 2006 22:32:01 +0000]
[PATCH] forcedeth: add recoverable error support

This patch adds support to recover from a previously fatal MAC error. In
the past the MAC would be hung on an internal fatal error. On new
chipsets, the MAC has the ability to enter a non-fatal state and allow
the driver to re-init it.

Signed-Off-By: Ayaz Abdulla <aabdulla@nvidia.com>

Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years ago[PATCH] forcedeth: add mgmt unit support
Ayaz Abdulla [Mon, 30 Oct 2006 22:31:51 +0000]
[PATCH] forcedeth: add mgmt unit support

This patch adds support for the mgmt unit in certain chipsets. The MAC
and the mgmt unit share the PHY and therefore proper intialization
procedures are needed for them to maintain coexistense.

Signed-Off-By: Ayaz Abdulla <aabdulla@nvidia.com>

Signed-off-by: Jeff Garzik <jeff@garzik.org>