10 years agojsflash: dequeue in-flight request
Tejun Heo [Fri, 8 May 2009 02:54:12 +0000]
jsflash: dequeue in-flight request

jsflash processes requests one-by-one synchronously from a kthread and
can be easily converted to dequeueing model.  Convert it.

[ Impact: dequeue in-flight request ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

10 years agomtd_blkdevs: dequeue in-flight request
Tejun Heo [Fri, 8 May 2009 02:54:11 +0000]
mtd_blkdevs: dequeue in-flight request

mtd_blkdevs processes requests one-by-one synchronously from a kthread
and can be easily converted to dequeueing model.  Convert it.

[ Impact: dequeue in-flight request ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

10 years agoxd: dequeue in-flight request
Tejun Heo [Fri, 8 May 2009 02:54:10 +0000]
xd: dequeue in-flight request

xd processes requests one-by-one synchronously and can be easily
converted to dequeueing model.  Convert it.

While at it, use rq_cur_bytes instead of rq_bytes when checking for
sector overflow.  This is for for consistency and better behavior for
merged requests.

[ Impact: dequeue in-flight request ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

10 years agoswim: dequeue in-flight request
Tejun Heo [Fri, 8 May 2009 02:54:09 +0000]
swim: dequeue in-flight request

swim processes requests one-by-one synchronously and can easily be
converted to dequeuing model.  Convert it.

[ Impact: dequeue in-flight request ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Laurent Vivier <Laurent@lvivier.info>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

10 years agoamiflop: dequeue in-flight request
Tejun Heo [Fri, 8 May 2009 02:54:08 +0000]
amiflop: dequeue in-flight request

Request processing in amiflop is done sequentially in
redo_fd_request() proper and redo_fd_request() can easily be converted
to track in-flight request.  Remove CURRENT, track in-flight request
directly and dequeue it when processing starts.

[ Impact: dequeue in-flight request ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

10 years agops3disk: dequeue in-flight request
Tejun Heo [Fri, 8 May 2009 02:54:07 +0000]
ps3disk: dequeue in-flight request

Other than in issue error paths, ps3disk always completely finishes
fetched requests.  With full completion on error paths, it can be
easily converted to dequeueing model.

* After L1 r/w call failure, ps3disk_submit_request_sg() now fails the
  whole request.  Issue failure isn't likely to benefit from partial
  retry anyway and ps3disk uses full failure in completion error path
  too, so I don't think this amounts to any meaningful functionality
  loss.

* flush completion is converted to _all for consistency.  It doesn't
  make any functional difference.

[ Impact: dequeue in-flight request ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

10 years agoparide: dequeue in-flight request
Tejun Heo [Fri, 8 May 2009 02:54:06 +0000]
paride: dequeue in-flight request

pd/pf/pcd have track in-flight request by pd/pf/pcd_req.  They can be
converted to dequeueing model by updating fetching and completion
paths.  Convert them.

Note that removal of elv_next_request() call from pf_next_buf()
doesn't make any functional difference.  The path is traveled only
during partial completion of a request and elv_next_request() call
must return the same request anyway.

[ Impact: dequeue in-flight request ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Tim Waugh <tim@cyberelk.net>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

10 years agoxsysace: dequeue in-flight request
Tejun Heo [Fri, 8 May 2009 02:54:05 +0000]
xsysace: dequeue in-flight request

xsysace already tracks in-flight request using ace->req.  Converting
to dequeueing model is mostly a matter of adding dequeueing call after
request fetching.  The only tricky part is handling CF removal which
should complete both in flight and on queue requests.  Convert to
dequeueing model.

While at it, remove explicit blk_rq_cur_bytes() and use
__blk_end_request_cur() instead.

[ Impact: dequeue in-flight request ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

10 years agoswim3: dequeue in-flight request
Tejun Heo [Fri, 8 May 2009 02:54:04 +0000]
swim3: dequeue in-flight request

swim3 has at most single request in flight and already tracks it using
fd_req.  Convert it to dequeuing model by updating request fetching
and wrapping completion function.

[ Impact: dequeue in-flight request ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

10 years agoataflop: dequeue and track in-flight request
Tejun Heo [Fri, 8 May 2009 02:54:03 +0000]
ataflop: dequeue and track in-flight request

ataflop has single request in flight.  Till now, whenever it needs to
access the in-flight request it called elv_next_request().  This patch
makes ataflop track the in-flight request directly and dequeue it when
processing starts.  The added complexity is minimal and this will help
future block layer changes.

[ Impact: dequeue in-flight request, one elv_next_request() per request ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

10 years agohd: dequeue and track in-flight request
Tejun Heo [Fri, 8 May 2009 02:54:02 +0000]
hd: dequeue and track in-flight request

hd has at most single request in flight.  Till now, whenever it needs
to access the in-flight request it called elv_next_request().  This
patch makes hd track the in-flight request directly and dequeue it
when processing starts.  The added complexity is minimal and this will
help future block layer changes.

[ Impact: dequeue in-flight request, one elv_next_request() per request ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

10 years agomg_disk: dequeue and track in-flight request
Tejun Heo [Fri, 8 May 2009 02:54:01 +0000]
mg_disk: dequeue and track in-flight request

mg_disk has at most single request in flight per device.  Till now,
whenever it needs to access the in-flight request it called
elv_next_request().  This patch makes mg_disk track the in-flight
request directly using mg_host->req and dequeue it when processing
starts.

q->queuedata is set to mg_host so that mg_host can be determined
without fetching request from the queue.

[ Impact: dequeue in-flight request, one elv_next_request() per request ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: unsik Kim <donari75@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

10 years agomg_disk: fix queue hang / infinite retry on !fs requests
Tejun Heo [Fri, 8 May 2009 02:54:00 +0000]
mg_disk: fix queue hang / infinite retry on !fs requests

Both request functions in mg_disk simply return when they encounter a
!fs request, which means the request will never be cleared from the
queue causing queue hang and indefinite retry of the request.  Fix it.

While at it, flatten condition checks and add unlikely to !fs tests.

[ Impact: fix possible queue hang / infinite retry of !fs requests ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: unsik Kim <donari75@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

10 years agoide: dequeue in-flight request
Tejun Heo [Fri, 8 May 2009 02:53:59 +0000]
ide: dequeue in-flight request

ide generally has single request in flight and tracks it using
hwif->rq and all state handlers follow the following convention.

* ide_started is returned if the request is in flight.

* ide_stopped is returned if the queue needs to be restarted.  The
  request might or might not have been processed fully or partially.

* hwif->rq is set to NULL, when an issued request completes.

So, dequeueing model can be implemented by dequeueing after fetch,
requeueing if hwif->rq isn't NULL on ide_stopped return and doing
about the same thing on completion / port unlock paths.  These changes
can be made in ide-io proper.

In addition to the above main changes, the following updates are
necessary.

* ide-cd shouldn't dequeue a request when issuing REQUEST SENSE for it
  as the request is already dequeued.

* ide-atapi uses request queue as stack when issuing REQUEST SENSE to
  put the REQUEST SENSE in front of the failed request.  This now
  needs to be done using requeueing.

[ Impact: dequeue in-flight request ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Borislav Petkov <petkovbb@googlemail.com>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

10 years agoblock: blk_rq_[cur_]_{sectors|bytes}() usage cleanup
Tejun Heo [Thu, 7 May 2009 13:24:45 +0000]
block: blk_rq_[cur_]_{sectors|bytes}() usage cleanup

With the previous changes, the followings are now guaranteed for all
requests in any valid state.

* blk_rq_sectors() == blk_rq_bytes() >> 9
* blk_rq_cur_sectors() == blk_rq_cur_bytes() >> 9

Clean up accessor usages.  Notable changes are

* nbd,i2o_block: end_all used instead of explicit byte count
* scsi_lib: unnecessary conditional on request type removed

[ Impact: cleanup ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Paul Clements <paul.clements@steeleye.com>
Cc: Pete Zaitcev <zaitcev@redhat.com>
Cc: Alex Dubov <oakad@yahoo.com>
Cc: Markus Lidel <Markus.Lidel@shadowconnect.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

10 years agoblock: hide request sector and data_len
Tejun Heo [Thu, 7 May 2009 13:24:44 +0000]
block: hide request sector and data_len

Block low level drivers for some reason have been pretty good at
abusing block layer API.  Especially struct request's fields tend to
get violated in all possible ways.  Make it clear that low level
drivers MUST NOT access or manipulate rq->sector and rq->data_len
directly by prefixing them with double underscores.

This change is also necessary to break build of out-of-tree codes
which assume the previous block API where internal fields can be
manipulated and rq->data_len carries residual count on completion.

[ Impact: hide internal fields, block API change ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

10 years agoide: cleanup rq->data_len usages
Tejun Heo [Thu, 7 May 2009 13:24:43 +0000]
ide: cleanup rq->data_len usages

With recent unification of fields, it's now guaranteed that
rq->data_len always equals blk_rq_bytes().  Convert all direct users
to accessors.

[ Impact: convert direct rq->data_len usages to blk_rq_bytes() ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Borislav Petkov <petkovbb@googlemail.com>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

10 years agoblock: cleanup rq->data_len usages
Tejun Heo [Thu, 7 May 2009 13:24:42 +0000]
block: cleanup rq->data_len usages

With recent unification of fields, it's now guaranteed that
rq->data_len always equals blk_rq_bytes().  Convert all non-IDE direct
users to accessors.  IDE will be converted in a separate patch.

Boaz: spotted incorrect data_len/resid_len conversion in osd.

[ Impact: convert direct rq->data_len usages to blk_rq_bytes() ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Pete Zaitcev <zaitcev@redhat.com>
Cc: Eric Moore <Eric.Moore@lsi.com>
Cc: Markus Lidel <Markus.Lidel@shadowconnect.com>
Cc: Darrick J. Wong <djwong@us.ibm.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Eric Moore <Eric.Moore@lsi.com>
Cc: Boaz Harrosh <bharrosh@panasas.com>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

10 years agoblock: drop request->hard_* and *nr_sectors
Tejun Heo [Thu, 7 May 2009 13:24:41 +0000]
block: drop request->hard_* and *nr_sectors

struct request has had a few different ways to represent some
properties of a request.  ->hard_* represent block layer's view of the
request progress (completion cursor) and the ones without the prefix
are supposed to represent the issue cursor and allowed to be updated
as necessary by the low level drivers.  The thing is that as block
layer supports partial completion, the two cursors really aren't
necessary and only cause confusion.  In addition, manual management of
request detail from low level drivers is cumbersome and error-prone at
the very least.

Another interesting duplicate fields are rq->[hard_]nr_sectors and
rq->{hard_cur|current}_nr_sectors against rq->data_len and
rq->bio->bi_size.  This is more convoluted than the hard_ case.

rq->[hard_]nr_sectors are initialized for requests with bio but
blk_rq_bytes() uses it only for !pc requests.  rq->data_len is
initialized for all request but blk_rq_bytes() uses it only for pc
requests.  This causes good amount of confusion throughout block layer
and its drivers and determining the request length has been a bit of
black magic which may or may not work depending on circumstances and
what the specific LLD is actually doing.

rq->{hard_cur|current}_nr_sectors represent the number of sectors in
the contiguous data area at the front.  This is mainly used by drivers
which transfers data by walking request segment-by-segment.  This
value always equals rq->bio->bi_size >> 9.  However, data length for
pc requests may not be multiple of 512 bytes and using this field
becomes a bit confusing.

In general, having multiple fields to represent the same property
leads only to confusion and subtle bugs.  With recent block low level
driver cleanups, no driver is accessing or manipulating these
duplicate fields directly.  Drop all the duplicates.  Now rq->sector
means the current sector, rq->data_len the current total length and
rq->bio->bi_size the current segment length.  Everything else is
defined in terms of these three and available only through accessors.

* blk_recalc_rq_sectors() is collapsed into blk_update_request() and
  now handles pc and fs requests equally other than rq->sector update.
  This means that now pc requests can use partial completion too (no
  in-kernel user yet tho).

* bio_cur_sectors() is replaced with bio_cur_bytes() as block layer
  now uses byte count as the primary data length.

* blk_rq_pos() is now guranteed to be always correct.  In-block users
  converted.

* blk_rq_bytes() is now guaranteed to be always valid as is
  blk_rq_sectors().  In-block users converted.

* blk_rq_sectors() is now guaranteed to equal blk_rq_bytes() >> 9.
  More convenient one is used.

* blk_rq_bytes() and blk_rq_cur_bytes() are now inlined and take const
  pointer to request.

[ Impact: API cleanup, single way to represent one property of a request ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

10 years agoide: convert to rq pos and nr_sectors accessors
Tejun Heo [Thu, 7 May 2009 13:24:40 +0000]
ide: convert to rq pos and nr_sectors accessors

ide doesn't manipulate request fields anymore and thus all hard and
their soft equivalents are always equal.  Convert all references to
accessors.

[ Impact: use pos and nr_sectors accessors ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Borislav Petkov <petkovbb@googlemail.com>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

10 years agoblock: convert to pos and nr_sectors accessors
Tejun Heo [Thu, 7 May 2009 13:24:39 +0000]
block: convert to pos and nr_sectors accessors

With recent cleanups, there is no place where low level driver
directly manipulates request fields.  This means that the 'hard'
request fields always equal the !hard fields.  Convert all
rq->sectors, nr_sectors and current_nr_sectors references to
accessors.

While at it, drop superflous blk_rq_pos() < 0 test in swim.c.

[ Impact: use pos and nr_sectors accessors ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Tested-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Tested-by: Adrian McMenamin <adrian@mcmen.demon.co.uk>
Acked-by: Adrian McMenamin <adrian@mcmen.demon.co.uk>
Acked-by: Mike Miller <mike.miller@hp.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Borislav Petkov <petkovbb@googlemail.com>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Eric Moore <Eric.Moore@lsi.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Pete Zaitcev <zaitcev@redhat.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Paul Clements <paul.clements@steeleye.com>
Cc: Tim Waugh <tim@cyberelk.net>
Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Alex Dubov <oakad@yahoo.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Dario Ballabio <ballabio_dario@emc.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: unsik Kim <donari75@gmail.com>
Cc: Laurent Vivier <Laurent@lvivier.info>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

10 years agoblock: implement blk_rq_pos/[cur_]sectors() and convert obvious ones
Tejun Heo [Thu, 7 May 2009 13:24:38 +0000]
block: implement blk_rq_pos/[cur_]sectors() and convert obvious ones

Implement accessors - blk_rq_pos(), blk_rq_sectors() and
blk_rq_cur_sectors() which return rq->hard_sector, rq->hard_nr_sectors
and rq->hard_cur_sectors respectively and convert direct references of
the said fields to the accessors.

This is in preparation of request data length handling cleanup.

Geert : suggested adding const to struct request * parameter to accessors
Sergei : spotted error in patch description

[ Impact: cleanup ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Tested-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Ackec-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Borislav Petkov <petkovbb@googlemail.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

10 years agoblock: add rq->resid_len
Tejun Heo [Thu, 7 May 2009 13:24:37 +0000]
block: add rq->resid_len

rq->data_len served two purposes - the length of data buffer on issue
and the residual count on completion.  This duality creates some
headaches.

First of all, block layer and low level drivers can't really determine
what rq->data_len contains while a request is executing.  It could be
the total request length or it coulde be anything else one of the
lower layers is using to keep track of residual count.  This
complicates things because blk_rq_bytes() and thus
[__]blk_end_request_all() relies on rq->data_len for PC commands.
Drivers which want to report residual count should first cache the
total request length, update rq->data_len and then complete the
request with the cached data length.

Secondly, it makes requests default to reporting full residual count,
ie. reporting that no data transfer occurred.  The residual count is
an exception not the norm; however, the driver should clear
rq->data_len to zero to signify the normal cases while leaving it
alone means no data transfer occurred at all.  This reverse default
behavior complicates code unnecessarily and renders block PC on some
drivers (ide-tape/floppy) unuseable.

This patch adds rq->resid_len which is used only for residual count.

While at it, remove now unnecessasry blk_rq_bytes() caching in
ide_pc_intr() as rq->data_len is not changed anymore.

Boaz : spotted missing conversion in osd
Sergei : spotted too early conversion to blk_rq_bytes() in ide-tape

[ Impact: cleanup residual count handling, report 0 resid by default ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Borislav Petkov <petkovbb@googlemail.com>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Mike Miller <mike.miller@hp.com>
Cc: Eric Moore <Eric.Moore@lsi.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Doug Gilbert <dgilbert@interlog.com>
Cc: Mike Miller <mike.miller@hp.com>
Cc: Eric Moore <Eric.Moore@lsi.com>
Cc: Darrick J. Wong <djwong@us.ibm.com>
Cc: Pete Zaitcev <zaitcev@redhat.com>
Cc: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

10 years agoide-tape: don't initialize rq->sector for rw requests
Tejun Heo [Thu, 7 May 2009 13:24:36 +0000]
ide-tape: don't initialize rq->sector for rw requests

rq->sector is set to the tape->first_frame but it's never actually
used and not even in the correct unit (512 byte sectors).  Don't set
it.

[ Impact: cleanup ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Borislav Petkov <petkovbb@gmail.com>
Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

10 years agonbd: don't clear rq->sector and nr_sectors unnecessarily
Tejun Heo [Thu, 7 May 2009 13:24:35 +0000]
nbd: don't clear rq->sector and nr_sectors unnecessarily

There's no reason to clear rq->sector and nr_sectors after calling
blk_rq_init().  They're guaranteed to be clear.  Drop unnecessary
clearing.

[ Impact: cleanup ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Paul Clements <paul.clements@steeleye.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

10 years agomg_disk: use defines from <linux/ata.h>
Bartlomiej Zolnierkiewicz [Tue, 28 Apr 2009 04:06:17 +0000]
mg_disk: use defines from <linux/ata.h>

While at it:
- remove MG_REG_HEAD_MUST_BE_ON define
- remove MG_REG_CTRL_INTR_ENABLE define
- remove MG_REG_HEAD_LBA_MODE define
- remove unused defines

Cc: unsik Kim <donari75@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

10 years agomg_disk: fix dependency on libata
Bartlomiej Zolnierkiewicz [Tue, 28 Apr 2009 04:06:16 +0000]
mg_disk: fix dependency on libata

Add local copies of ata_id_string() and ata_id_c_string() to mg_disk
so there is no need for the driver to depend on ATA and SCSI.

[ Impact: break dependency on libata by copying ata id string functions ]

Cc: unsik Kim <donari75@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

10 years agomg_disk: clean up request completion paths
Tejun Heo [Tue, 28 Apr 2009 04:06:15 +0000]
mg_disk: clean up request completion paths

mg_disk implements its own partial completion.  Convert to standard
block layer partial completion.

[ Impact: cleanup ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: unsik Kim <donari75@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

10 years agomg_disk: fold mg_disk.h into mg_disk.c
Tejun Heo [Tue, 28 Apr 2009 04:06:14 +0000]
mg_disk: fold mg_disk.h into mg_disk.c

include/linux/mg_disk.h is used only by drivers/block/mg_disk.c.  No
reason to put it in a separate header.  Fold it into mg_disk.c.

[ Impact: cleanup ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: unsik Kim <donari75@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

10 years agoswim: clean up request completion paths
Tejun Heo [Tue, 28 Apr 2009 04:06:13 +0000]
swim: clean up request completion paths

swim curiously tries to update request parameters before calling
__blk_end_request() when __blk_end_request() will do it anyway and
unnecessarily checks whether current_nr_sectors is zero right after
fetching.

Drop unnecessary stuff and use standard block layer mechanisms.

[ Impact: cleanup ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Laurent Vivier <Laurent@lvivier.info>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

10 years agoswim3: clean up request completion paths
Tejun Heo [Tue, 28 Apr 2009 04:06:12 +0000]
swim3: clean up request completion paths

swim3 curiously tries to update request parameters before calling
__blk_end_request() when __blk_end_request() will do it anyway, and it
updates request for partial completion manually instead of using
blk_update_request().  Also, it does some spurious checks on rq such
as testing whether rq->sector is negative or current_nr_sectors is
zero right after fetching.

Drop unnecessary stuff and use standard block layer mechanisms.

[ Impact: cleanup ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

10 years agohd: clean up request completion paths
Tejun Heo [Tue, 28 Apr 2009 04:06:11 +0000]
hd: clean up request completion paths

hd read/write_intr() functions manually manipulate request to
incrementally complete it, which block layer already supports.  Simply
use block layer completion routines instead of manual partial
completion.

While at it, clear unnecessary elv_next_request() check at the tail of
read_intr().  This also makes read and write_intr() more consistent.

[ Impact: cleanup ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

10 years agoubd: drop unnecessary rq->sector manipulation
Tejun Heo [Tue, 28 Apr 2009 04:06:10 +0000]
ubd: drop unnecessary rq->sector manipulation

ubd curiously updates rq->sector while issuing the request in multiple
pieces.  Don't do it and simply use local copy of sector.

[ Impact: cleanup ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

10 years agoubd: cleanup completion path
Tejun Heo [Tue, 28 Apr 2009 04:06:09 +0000]
ubd: cleanup completion path

ubd had its own block request partial completion mechanism, which is
unnecessary as block layer already does it.  Kill ubd_end_request()
and ubd_finish() and replace them with direct call to
blk_end_request().

[ Impact: cleanup ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

10 years agosunvdc: kill vdc_end_request()
Tejun Heo [Tue, 28 Apr 2009 04:06:08 +0000]
sunvdc: kill vdc_end_request()

vdc_end_request() is a thin silly wrapper on top of
__blk_end_request().  Kill it.

[ Impact: cleanup ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

10 years agops3disk: simplify request completion
Tejun Heo [Tue, 28 Apr 2009 04:06:07 +0000]
ps3disk: simplify request completion

ps3disk_interrupt() always completes requests fully but it uses
rq->hard_cur_sectors for FLUSH requests for some reason.  Drop them
and simply use __blk_end_request_all().

[ Impact: cleanup ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

10 years agoamiflop,ataflop,xd,mg_disk: clean up unnecessary stuff from block drivers
Tejun Heo [Tue, 28 Apr 2009 04:06:06 +0000]
amiflop,ataflop,xd,mg_disk: clean up unnecessary stuff from block drivers

rq_data_dir() can only be READ or WRITE and rq->sector and nr_sectors
are always automatically updated after partial request completion.
Don't worry about rq_data_dir() not being either READ or WRITE or
manually update sector and nr_sectors.

[ Impact: cleanup ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jörg Dorchain <joerg@dorchain.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: unsik Kim <donari75@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

10 years agoblock: don't init rq fields unnecessarily
Tejun Heo [Tue, 28 Apr 2009 04:06:05 +0000]
block: don't init rq fields unnecessarily

blk_get_request() always returns properly zeroed requests.  Don't set
fields to zero/NULL unnecessarily.

[ Impact: cleanup ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

10 years agoblock: make blk_end_request_cur() return bool
Tejun Heo [Tue, 28 Apr 2009 04:06:04 +0000]
block: make blk_end_request_cur() return bool

In the process of mindlessly copying [__]blk_end_request_all(),
[__]blk_end_request_cur() ended up returning void even though they're
partial completion functions.  Fix it.

[ Impact: fix braindead API ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

10 years agoblock: catch trying to use more bits than request->cmd_flags has
Nikanth Karthikesan [Mon, 27 Apr 2009 12:53:54 +0000]
block: catch trying to use more bits than request->cmd_flags has

Signed-off-by: Nikanth Karthikesan <knikanth@suse.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

10 years agoblock: include discard requests in IO accounting
Jens Axboe [Fri, 24 Apr 2009 06:12:19 +0000]
block: include discard requests in IO accounting

We currently don't do merging on discard requests, but we potentially
could. If we do, then we need to include discard requests in the IO
accounting, or merging would end up decrementing in_flight IO counters
for an IO which never incremented them.

So enable accounting for discard requests.

Problem found by Nikanth Karthikesan <knikanth@suse.de>

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

10 years agoblock: make blk_do_io_stat() do the full "is this rq accountable" checks
Jens Axboe [Fri, 24 Apr 2009 06:10:11 +0000]
block: make blk_do_io_stat() do the full "is this rq accountable" checks

We currently check for file system requests outside of blk_do_io_stat(rq),
but we may as well just include it.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

10 years agoblock: kill rq->data
Tejun Heo [Thu, 23 Apr 2009 02:05:20 +0000]
block: kill rq->data

Now that all block request data transfer is done via bio, rq->data
isn't used.  Kill it.

While at it, make the roles of rq->special and buffer clear.

[ Impact: drop now unncessary field from struct request ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Boaz Harrosh <bharrosh@panasas.com>

10 years agoarm-omap: don't abuse rq->data
Tejun Heo [Thu, 23 Apr 2009 02:05:20 +0000]
arm-omap: don't abuse rq->data

omap mailbox uses rq->data as the second opaque pointer to carry
mbox_msg_t and rq->special message argument which is needed only for
tx.  Add and use omap_msg_tx_data struct for tx and use rq->special
for mbox_msg_t for rx such that only rq->special is used as opaque
pointer.

[ Impact: cleanup rq->data usage, extra kmalloc in msg_send ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Russell King <rmk@arm.linux.org.uk>

10 years agoblock: replace end_request() with [__]blk_end_request_cur()
Tejun Heo [Thu, 23 Apr 2009 02:05:19 +0000]
block: replace end_request() with [__]blk_end_request_cur()

end_request() has been kept around for backward compatibility;
however, it's about time for it to go away.

* There aren't too many users left.

* Its use of @updtodate is pretty confusing.

* In some cases, newer code ends up using mixture of end_request() and
  [__]blk_end_request[_all](), which is way too confusing.

So, add [__]blk_end_request_cur() and replace end_request() with it.
Most conversions are straightforward.  Noteworthy ones are...

* paride/pcd: next_request() updated to take 0/-errno instead of 1/0.

* paride/pf: pf_end_request() and next_request() updated to take
  0/-errno instead of 1/0.

* xd: xd_readwrite() updated to return 0/-errno instead of 1/0.

* mtd/mtd_blkdevs: blktrans_discard_request() updated to return
  0/-errno instead of 1/0.  Unnecessary local variable res
  initialization removed from mtd_blktrans_thread().

[ Impact: cleanup ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Joerg Dorchain <joerg@dorchain.net>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Laurent Vivier <Laurent@lvivier.info>
Cc: Tim Waugh <tim@cyberelk.net>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Markus Lidel <Markus.Lidel@shadowconnect.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Pete Zaitcev <zaitcev@redhat.com>
Cc: unsik Kim <donari75@gmail.com>

10 years agoblock: implement and use [__]blk_end_request_all()
Tejun Heo [Thu, 23 Apr 2009 02:05:19 +0000]
block: implement and use [__]blk_end_request_all()

There are many [__]blk_end_request() call sites which call it with
full request length and expect full completion.  Many of them ensure
that the request actually completes by doing BUG_ON() the return
value, which is awkward and error-prone.

This patch adds [__]blk_end_request_all() which takes @rq and @error
and fully completes the request.  BUG_ON() is added to to ensure that
this actually happens.

Most conversions are simple but there are a few noteworthy ones.

* cdrom/viocd: viocd_end_request() replaced with direct calls to
  __blk_end_request_all().

* s390/block/dasd: dasd_end_request() replaced with direct calls to
  __blk_end_request_all().

* s390/char/tape_block: tapeblock_end_request() replaced with direct
  calls to blk_end_request_all().

[ Impact: cleanup ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Mike Miller <mike.miller@hp.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Alex Dubov <oakad@yahoo.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>

10 years agoblock: move rq->start_time initialization to blk_rq_init()
Tejun Heo [Thu, 23 Apr 2009 02:05:18 +0000]
block: move rq->start_time initialization to blk_rq_init()

rq->start_time was initialized in init_request_from_bio() so special
requests didn't have start_time set.  This has been okay as start_time
has been used only for fs requests; however, there is no indication of
this actually is the case or not.  Set rq->start_time in blk_rq_init()
and guarantee that all initialized rq's have its start_time set.  This
improves consistency at virtually no cost and future changes will make
use of the timestamp for !bio requests.

[ Impact: rq->start_time is valid for all requests ]

Signed-off-by: Tejun Heo <tj@kernel.org>

10 years agoblock: clean up request completion API
Tejun Heo [Thu, 23 Apr 2009 02:05:18 +0000]
block: clean up request completion API

Request completion has gone through several changes and became a bit
messy over the time.  Clean it up.

1. end_that_request_data() is a thin wrapper around
   end_that_request_data_first() which checks whether bio is NULL
   before doing anything and handles bidi completion.
   blk_update_request() is a thin wrapper around
   end_that_request_data() which clears nr_sectors on the last
   iteration but doesn't use the bidi completion.

   Clean it up by moving the initial bio NULL check and nr_sectors
   clearing on the last iteration into end_that_request_data() and
   renaming it to blk_update_request(), which makes blk_end_io() the
   only user of end_that_request_data().  Collapse
   end_that_request_data() into blk_end_io().

2. There are four visible completion variants - blk_end_request(),
   __blk_end_request(), blk_end_bidi_request() and end_request().
   blk_end_request() and blk_end_bidi_request() uses blk_end_request()
   as the backend but __blk_end_request() and end_request() use
   separate implementation in __blk_end_request() due to different
   locking rules.

   blk_end_bidi_request() is identical to blk_end_io().  Collapse
   blk_end_io() into blk_end_bidi_request(), separate out request
   update into internal helper blk_update_bidi_request() and add
   __blk_end_bidi_request().  Redefine [__]blk_end_request() as thin
   inline wrappers around [__]blk_end_bidi_request().

3. As the whole request issue/completion usages are about to be
   modified and audited, it's a good chance to convert completion
   functions return bool which better indicates the intended meaning
   of return values.

4. The function name end_that_request_last() is from the days when it
   was a public interface and slighly confusing.  Give it a proper
   internal name - blk_finish_request().

5. Add description explaning that blk_end_bidi_request() can be safely
   used for uni requests as suggested by Boaz Harrosh.

The only visible behavior change is from #1.  nr_sectors counts are
cleared after the final iteration no matter which function is used to
complete the request.  I couldn't find any place where the code
assumes those nr_sectors counters contain the values for the last
segment and this change is good as it makes the API much more
consistent as the end result is now same whether a request is
completed using [__]blk_end_request() alone or in combination with
blk_update_request().

API further cleaned up per Christoph's suggestion.

[ Impact: cleanup, rq->*nr_sectors always updated after req completion ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Boaz Harrosh <bharrosh@panasas.com>
Cc: Christoph Hellwig <hch@infradead.org>

10 years agoblock: kill blk_end_request_callback()
Tejun Heo [Thu, 23 Apr 2009 02:05:18 +0000]
block: kill blk_end_request_callback()

With recent IDE updates, blk_end_request_callback() doesn't have any
user now.  Kill it.

[ Impact: removal of unused convoluted interface ]

Signed-off-by: Tejun Heo <tj@kernel.org>

10 years agoblock: reorganize request fetching functions
Tejun Heo [Thu, 23 Apr 2009 02:05:18 +0000]
block: reorganize request fetching functions

Impact: code reorganization

elv_next_request() and elv_dequeue_request() are public block layer
interface than actual elevator implementation.  They mostly deal with
how requests interact with block layer and low level drivers at the
beginning of rqeuest processing whereas __elv_next_request() is the
actual eleveator request fetching interface.

Move the two functions to blk-core.c.  This prepares for further
interface cleanup.

Signed-off-by: Tejun Heo <tj@kernel.org>

10 years agoblock: reorder request completion functions
Tejun Heo [Thu, 23 Apr 2009 02:05:18 +0000]
block: reorder request completion functions

Reorder request completion functions such that

* All request completion functions are located together.

* Functions which are used by only one caller is put right above the
  caller.

* end_request() is put after other completion functions but before
  blk_update_request().

This change is for completion function cleanup which will follow.

[ Impact: cleanup, code reorganization ]

Signed-off-by: Tejun Heo <tj@kernel.org>

10 years agoblock: clean up misc stuff after block layer timeout conversion
Tejun Heo [Thu, 23 Apr 2009 02:05:18 +0000]
block: clean up misc stuff after block layer timeout conversion

* In blk_rq_timed_out_timer(), else { if } to else if

* In blk_add_timer(), simplify if/else block

[ Impact: cleanup ]

Signed-off-by: Tejun Heo <tj@kernel.org>

10 years agoblock: cleanup REQ_SOFTBARRIER usages
Tejun Heo [Thu, 23 Apr 2009 02:05:18 +0000]
block: cleanup REQ_SOFTBARRIER usages

blk_insert_request() doesn't need to worry about REQ_SOFTBARRIER.
Don't set it.  Combined with recent ide updates, REQ_SOFTBARRIER is
now only used in elevator proper and for discard requests.

[ Impact: cleanup ]

Signed-off-by: Tejun Heo <tj@kernel.org>

10 years agoblock: don't set REQ_NOMERGE unnecessarily
Tejun Heo [Thu, 23 Apr 2009 02:05:17 +0000]
block: don't set REQ_NOMERGE unnecessarily

RQ_NOMERGE_FLAGS already clears defines which REQ flags aren't
mergeable.  There is no reason to specify it superflously.  It only
adds to confusion.  Don't set REQ_NOMERGE for barriers and requests
with specific queueing directive.  REQ_NOMERGE is now exclusively used
by the merging code.

[ Impact: cleanup ]

Signed-off-by: Tejun Heo <tj@kernel.org>

10 years agoblock: kill blk_start_queueing()
Tejun Heo [Thu, 23 Apr 2009 02:05:17 +0000]
block: kill blk_start_queueing()

blk_start_queueing() is identical to __blk_run_queue() except that it
doesn't check for recursion.  None of the current users depends on
blk_start_queueing() running request_fn directly.  Replace usages of
blk_start_queueing() with [__]blk_run_queue() and kill it.

[ Impact: removal of mostly duplicate interface function ]

Signed-off-by: Tejun Heo <tj@kernel.org>

10 years agoblock: merge blk_invoke_request_fn() into __blk_run_queue()
Tejun Heo [Thu, 23 Apr 2009 02:05:17 +0000]
block: merge blk_invoke_request_fn() into __blk_run_queue()

__blk_run_queue wraps blk_invoke_request_fn() such that it
additionally removes plug and bails out early if the queue is empty.
Both extra operations have their own pending mechanisms and don't
cause any harm correctness-wise when they are done superflously.

The only user of blk_invoke_request_fn() being blk_start_queue(),
there isn't much reason to keep both functions around.  Merge
blk_invoke_request_fn() into __blk_run_queue() and make
blk_start_queue() use __blk_run_queue() instead.

[ Impact: merge two subtly different internal functions ]

Signed-off-by: Tejun Heo <tj@kernel.org>

10 years agoblock: implement blkdev_readpages
Jeff Moyer [Wed, 22 Apr 2009 12:08:13 +0000]
block: implement blkdev_readpages

Doing a proper block dev ->readpages() speeds up the crazy dump(8)
approach of using interleaved process IO.

Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

10 years agoblock: enable by default support for large devices and files on 32-bit archs
Bartlomiej Zolnierkiewicz [Tue, 21 Apr 2009 07:27:03 +0000]
block: enable by default support for large devices and files on 32-bit archs

Enable by default support for large devices and files (CONFIG_LBD):

- With 1TB disks being a commodity hardware it is quite easy to hit 2TB
  limitation while building RAIDs etc. and many distros have been using
  CONFIG_LBD=y by default already (at least Fedora 10 and openSUSE 11.1).

- This should also prevent a subtle ext4 filesystem compatibility issue:
  mke2fs.ext4 defaults to creating filesystems with huge_files feature
  enabled and such filesystems cannot be later mounted read-write on
  machines with CONFIG_LBD=n (it should be quite easy to hit this issue
  when trying to use filesystem created using distro kernel on system
  running the self-build kernel, think about USB disk enclosures & co.).

While at it:

- Clarify config option help text w.r.t. mounting ext4 filesystems
  (they can be mounted with CONFIG_LBD=n but in the read-only mode).

Cc: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

10 years agoide-dma: don't reset request fields on dma_timeout_retry()
Tejun Heo [Tue, 21 Apr 2009 03:16:56 +0000]
ide-dma: don't reset request fields on dma_timeout_retry()

Impact: drop unnecessary code

Now that everything uses bio and block operations, there is no need to
reset request fields manually when retrying a request.  Every field is
guaranteed to be always valid.  Drop unnecessary request field
resetting from ide_dma_timeout_retry().

Signed-off-by: Tejun Heo <tj@kernel.org>

10 years agoide: drop rq->data handling from ide_map_sg()
Tejun Heo [Sat, 18 Apr 2009 23:46:03 +0000]
ide: drop rq->data handling from ide_map_sg()

Impact: remove code path which is no longer necessary

All IDE data transfers now use rq->bio.  Simplify ide_map_sg()
accordingly.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>

10 years agoide-atapi: kill unused fields and callbacks
Tejun Heo [Sat, 18 Apr 2009 23:46:03 +0000]
ide-atapi: kill unused fields and callbacks

Impact: remove fields and code paths which are no longer necessary

Now that ide-tape uses standard mechanisms to transfer data, special
case handling for bh handling can be dropped from ide-atapi.  Drop the
followings.

* pc->cur_pos, b_count, bh and b_data
* drive->pc_update_buffers() and pc_io_buffers().

Signed-off-by: Tejun Heo <tj@kernel.org>

10 years agoide-tape: simplify read/write functions
Tejun Heo [Sat, 18 Apr 2009 23:46:03 +0000]
ide-tape: simplify read/write functions

Impact: cleanup

idetape_chrdev_read/write() functions are unnecessarily complex when
everything can be handled in a single loop.  Collapse
idetape_add_chrdev_read/write_request() into the rw functions and
simplify the implementation.

Signed-off-by: Tejun Heo <tj@kernel.org>

10 years agoide-tape: use byte size instead of sectors on rw issue functions
Tejun Heo [Sat, 18 Apr 2009 23:46:03 +0000]
ide-tape: use byte size instead of sectors on rw issue functions

Impact: cleanup

Byte size is what most issue functions deal with, make
idetape_queue_rw_tail() and its wrappers take byte size instead of
sector counts.  idetape_chrdev_read() and write() functions are
converted to use tape->buffer_size instead of ctl from tape->cap.

This cleans up code a little bit and will ease the next r/w
reimplementation.

Signed-off-by: Tejun Heo <tj@kernel.org>

10 years agoide-tape: unify r/w init paths
Tejun Heo [Sat, 18 Apr 2009 23:46:02 +0000]
ide-tape: unify r/w init paths

Impact: cleanup

Read and write init paths are almost identical.  Unify them into
idetape_init_rw().

Signed-off-by: Tejun Heo <tj@kernel.org>

10 years agoide-tape: kill idetape_bh
Tejun Heo [Sat, 18 Apr 2009 23:46:02 +0000]
ide-tape: kill idetape_bh

Impact: kill now unnecessary idetape_bh

With everything using standard mechanisms, there is no need for
idetape_bh anymore.  Kill it and use tape->buf, cur and valid to
describe data buffer instead.

Changes worth mentioning are...

* idetape_queue_rq_tail() now always queue tape->buf and and adjusts
  buffer state properly before completion.

* idetape_pad_zeros() clears the buffer only once.

Signed-off-by: Tejun Heo <tj@kernel.org>

10 years agoide-tape: use standard data transfer mechanism
Tejun Heo [Sat, 18 Apr 2009 23:46:02 +0000]
ide-tape: use standard data transfer mechanism

Impact: use standard way to transfer data

ide-tape uses rq in an interesting way.  For r/w requests, rq->special
is used to carry a private buffer management structure idetape_bh and
rq->nr_sectors and current_nr_sectors are initialized to the number of
idetape blocks which isn't necessary 512 bytes.  Also,
rq->current_nr_sectors is used to report back the residual count in
units of idetape blocks.

This peculiarity taxes both block layer and ide.  ide-atapi has
different paths and hooks to accomodate it and what a rq means becomes
quite confusing and making changes at the block layer becomes quite
difficult and error-prone.

This patch makes ide-tape use bio instead.  With the previous patch,
ide-tape currently is using single contiguos buffer so replacing it
isn't difficult.  Data buffer is mapped into bio using
blk_rq_map_kern() in idetape_queue_rw_tail().  idetape_io_buffers()
and idetape_update_buffers() are dropped and pc->bh is set to null to
tell ide-atapi to use standard data transfer mechanism and idetape_bh
byte counts are updated by the issuer on completion using the residual
count.

This change also nicely removes the FIXME in ide_pc_intr() where
ide-tape rqs need to be completed using ide_rq_bytes() instead of
blk_rq_bytes() (although this didn't really matter as the request
didn't have bio).

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <jens.axboe@oracle.com>

10 years agoide-tape: use single continuous buffer
Tejun Heo [Sat, 18 Apr 2009 23:46:02 +0000]
ide-tape: use single continuous buffer

Impact: simpler buffer allocation and handling, kills OOM, fix DMA transfers

ide-tape has its own multiple buffer mechanism using struct
idetape_bh.  It allocates buffer with decreasing order-of-two
allocations so that it results in minimum number of segments.
However, the implementation is quite complex and works in a way that
no other block or ide driver works necessitating a lot of special case
handling.

The benefit this complex allocation scheme brings is questionable as
PIO or DMA the number of segments (16 maximum) doesn't make any
noticeable difference and it also doesn't negate the need for multiple
order allocation which can fail under memory pressure or high
fragmentation although it does lower the highest order necessary by
one when the buffer size isn't power of two.

As the first step to remove the custom buffer management, this patch
makes ide-tape allocate single continous buffer.  The maximum order is
four.  I doubt the change would cause any trouble but if it ever
matters, it should be converted to regular sg mechanism like everyone
else and even in that case dropping custom buffer handling and moving
to standard mechanism first make sense as an intermediate step.

This patch makes the first bh to contain the whole buffer and drops
multi bh handling code.  Following patches will make further changes.

This patch has the side effect of killing OOM triggered by allocation
path and fixing DMA transfers.  Previously, bug in alloc path
triggered OOM on command issue and commands were passed to DMA engine
without DMA-mapping all the segments.

Signed-off-by: Tejun Heo <tj@kernel.org>

10 years agoide-atapi,tape,floppy: allow ->pc_callback() to change rq->data_len
Tejun Heo [Sat, 18 Apr 2009 23:46:02 +0000]
ide-atapi,tape,floppy: allow ->pc_callback() to change rq->data_len

Impact: allow residual count implementation in ->pc_callback()

rq->data_len has two duties - carrying the number of input bytes on
issue and carrying residual count back to the issuer on completion.
ide-atapi completion callback ->pc_callback() is the right place to do
this but currently ide-atapi depends on rq->data_len carrying the
original request size after calling ->pc_callback() to complete the pc
request.

This patch makes ide_pc_intr(), ide_tape_issue_pc() and
ide_floppy_issue_pc() cache length to complete before calling
->pc_callback() so that it can modify rq->data_len as necessary.

Note: As using rq->data_len for two purposes can make cases like this
      incorrect in subtle ways, future changes will introduce separate
      field for residual count.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <jens.axboe@oracle.com>

10 years agoide-tape,floppy: fix failed command completion after request sense
Tejun Heo [Sat, 18 Apr 2009 23:46:02 +0000]
ide-tape,floppy: fix failed command completion after request sense

Impact: fix infinite retry loop

After a command failed, ide-tape and floppy inserts REQUEST_SENSE in
front of the failed command and according to the result, sets
pc->retries, flags and errors.  After REQUEST_SENSE is complete, the
failed command is again at the front of the queue and if the verdict
was to terminate the request, the issue functions tries to complete it
directly by calling drive->pc_callback() and returning ide_stopped.

However, drive->pc_callback() doesn't complete a request.  It only
prepares for completion of the request.  As a result, this creates an
infinite loop where the failed request is retried perpetually.

Fix it by actually ending the request by calling ide_complete_rq().

Signed-off-by: Tejun Heo <tj@kernel.org>

10 years agoide-pm: don't abuse rq->data
Tejun Heo [Sat, 18 Apr 2009 22:00:43 +0000]
ide-pm: don't abuse rq->data

Impact: cleanup rq->data usage

ide-pm uses rq->data to carry pointer to struct request_pm_state
through request queue and rq->special is used to carray pointer to
local struct ide_cmd, which isn't necessary.  Use rq->special for
request_pm_state instead and use local ide_cmd in
ide_start_power_step().

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>

10 years agoide-cd,atapi: use bio for internal commands
Tejun Heo [Sat, 18 Apr 2009 22:00:42 +0000]
ide-cd,atapi: use bio for internal commands

Impact: unify request data buffer handling

rq->data is used mostly to pass kernel buffer through request queue
without using bio.  There are only a couple of places which still do
this in kernel and converting to bio isn't difficult.

This patch converts ide-cd and atapi to use bio instead of rq->data
for request sense and internal pc commands.  With previous change to
unify sense request handling, this is relatively easily achieved by
adding blk_rq_map_kern() during sense_rq prep and PC issue.

If blk_rq_map_kern() fails for sense, the error is deferred till sense
issue and aborts the failed command which triggered the sense.  Note
that this is a slim possibility as sense prep is done on each command
issue, so for the above condition to actually trigger, all preps since
the last sense issue till the issue of the request which would require
a sense should fail.

* do_request functions might sleep now.  This should be okay as ide
  request_fn - do_ide_request() - is invoked only from make_request
  and plug work.  Make sure this is the case by adding might_sleep()
  to do_ide_request().

* Functions which access the read sense data before the sense request
  is complete now should access bio_data(sense_rq->bio) as the sense
  buffer might have been copied during blk_rq_map_kern().

* ide-tape updated to map sg.

* cdrom_do_block_pc() now doesn't have to deal with REQ_TYPE_ATA_PC
  special case.  Simplified.

* tp_ops->output/input_data path dropped from ide_pc_intr().

Signed-off-by: Tejun Heo <tj@kernel.org>

10 years agoide-atapi: convert ide-{floppy,tape} to using preallocated sense buffer
Borislav Petkov [Sat, 18 Apr 2009 22:00:42 +0000]
ide-atapi: convert ide-{floppy,tape} to using preallocated sense buffer

Since we're issuing REQ_TYPE_SENSE now we need to allow those types of
rqs in the ->do_request callbacks. As a future improvement, sense_len
assignment might be unified across all ATAPI devices. Borislav to
check with specs and test.

As a result, get rid of ide_queue_pc_head() and
drive->request_sense_rq.

tj: * Init request sense ide_atapi_pc from sense request.  In the
      longer timer, it would probably better to fold
      ide_create_request_sense_cmd() into its only current user -
      ide_floppy_get_format_progress().

    * ide_retry_pc() no longer takes @disk.

CC: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
CC: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

10 years agoide-cd: convert to using generic sense request
Borislav Petkov [Sat, 18 Apr 2009 22:00:42 +0000]
ide-cd: convert to using generic sense request

Preallocate a sense request in the ->do_request method and reinitialize
it only on demand, in case it's been consumed in the IRQ handler path.
The reason for this is that we don't want to be mapping rq to bio in
the IRQ path and introduce all kinds of unnecessary hacks to the block
layer.

tj: * Both user and kernel PC requests expect sense data to be stored
      in separate storage other than drive->sense_data.  Copy sense
      data to rq->sense on completion if rq->sense is not NULL.  This
      fixes bogus sense data on PC requests.

As a result, remove cdrom_queue_request_sense.

CC: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
CC: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

10 years agoide: add helpers for preparing sense requests
Borislav Petkov [Sat, 18 Apr 2009 22:00:42 +0000]
ide: add helpers for preparing sense requests

This is in preparation of removing the queueing of a sense request out
of the IRQ handler path.

Use struct request_sense as a general sense buffer for all ATAPI
devices ide-{floppy,tape,cd}.

tj: * blk_get_request(__GFP_WAIT) can't be called from do_request() as
      it can cause deadlock.  Converted to use inline struct request
      and blk_rq_init().

    * Added xfer / cdb len selection depending on device type.

    * All sense prep logics folded into ide_prep_sense() which never
      fails.

    * hwif->rq clearing and sense_rq used handling moved into
      ide_queue_sense_rq().

    * blk_rq_map_kern() conversion is moved to later patch.

CC: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
CC: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

10 years agoide-cd: don't abuse rq->buffer
Tejun Heo [Sat, 18 Apr 2009 22:00:42 +0000]
ide-cd: don't abuse rq->buffer

Impact: rq->buffer usage cleanup

ide-cd uses rq->buffer to carry pointer to the original request when
issuing REQUEST_SENSE.  Use rq->special instead.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>

10 years agoide-atapi: don't abuse rq->buffer
Tejun Heo [Sat, 18 Apr 2009 22:00:42 +0000]
ide-atapi: don't abuse rq->buffer

Impact: rq->buffer usage cleanup

ide-atapi uses rq->buffer as private opaque value for internal special
requests.  rq->special isn't used for these cases (the only case where
rq->special is used is for ide-tape rw requests).  Use rq->special
instead.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>

10 years agoide-taskfile: don't abuse rq->buffer
Tejun Heo [Sat, 18 Apr 2009 22:00:42 +0000]
ide-taskfile: don't abuse rq->buffer

Impact: rq->buffer usage cleanup

ide_raw_taskfile() directly uses rq->buffer to carry pointer to the
data buffer.  This complicates both block interface and ide backend
request handling.  Use blk_rq_map_kern() instead and drop special
handling for REQ_TYPE_ATA_TASKFILE from ide_map_sg().

Note that REQ_RW setting is moved upwards as blk_rq_map_kern() uses it
to initialize bio rw flag.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>

10 years agoide-floppy: block pc always uses bio
Tejun Heo [Sat, 18 Apr 2009 22:00:42 +0000]
ide-floppy: block pc always uses bio

Impact: remove unnecessary code path

Block pc requests always use bio and rq->data is always NULL.  No need
to worry about !rq->bio cases in idefloppy_block_pc_cmd().  Note that
ide-atapi uses ide_pio_bytes() for bio PIO transfer which handle sg
fine.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>

10 years agoide-cd: clear sense buffer before issuing request sense
Tejun Heo [Sat, 18 Apr 2009 22:00:41 +0000]
ide-cd: clear sense buffer before issuing request sense

Impact: code simplification

ide_cd_request_sense_fixup() clears the tail of the sense buffer if
the device didn't completely fill it.  This patch makes
cdrom_queue_request_sense() clear the sense buffer before issuing the
command instead of clearing it afterwards.  This simplifies code and
eases future changes.

Signed-off-by: Tejun Heo <tj@kernel.org>

10 years agoide kill unused ide_cmd->special
Tejun Heo [Sat, 18 Apr 2009 22:00:41 +0000]
ide kill unused ide_cmd->special

Impact: removal of unused field

No one uses ide_cmd->special anymore.  Kill it.

Signed-off-by: Tejun Heo <tj@kernel.org>

10 years agoide: don't set REQ_SOFTBARRIER
Tejun Heo [Sat, 18 Apr 2009 22:00:41 +0000]
ide: don't set REQ_SOFTBARRIER

ide doesn't have to worry about REQ_SOFTBARRIER.  Don't set it.

Signed-off-by: Tejun Heo <tj@kernel.org>

10 years agoide: use blk_run_queue() instead of blk_start_queueing()
Tejun Heo [Sat, 18 Apr 2009 22:00:41 +0000]
ide: use blk_run_queue() instead of blk_start_queueing()

blk_start_queueing() is being phased out in favor of
[__]blk_run_queue().  Switch.

Signed-off-by: Tejun Heo <tj@kernel.org>

10 years agoide-tape: remove back-to-back REQUEST_SENSE detection
Tejun Heo [Sat, 18 Apr 2009 22:00:41 +0000]
ide-tape: remove back-to-back REQUEST_SENSE detection

Impact: fix an oops which always triggers

ide_tape_issue_pc() assumed drive->pc isn't NULL on invocation when
checking for back-to-back request sense issues but drive->pc can be
NULL and even when it's not NULL, it's not safe to dereference it once
the previous command is complete because pc could have been freed or
was on stack.  Kill back-to-back REQUEST_SENSE detection.

Signed-off-by: Tejun Heo <tj@kernel.org>

10 years agoblock: clear req->errors on bio completion only for fs requests
Tejun Heo [Sat, 18 Apr 2009 22:00:41 +0000]
block: clear req->errors on bio completion only for fs requests

Impact: subtle behavior change

For fs requests, rq is only carrier of bios and rq error status as a
whole doesn't mean much.  This is the reason why rq->errors is being
cleared on each partial completion of a request as on each partial
completion the error status is transferred to the respective bios.

For pc requests, rq->errors is used to carry error status to the
issuer and thus __end_that_request_first() doesn't clear it on such
cases.

The condition was fine till now as only fs and pc requests have used
bio and thus the bio completion path.  However, future changes will
unify data accesses to bio and all non fs users care about rq error
status.  Clear rq->errors on bio completion only for fs requests.

In general, the implicit clearing is a bit too subtle especially as
the meaning of rq->errors is completely dependent on low level
drivers.  Unifying / cleaning up rq->errors usage and letting llds
manage it would be better.  TODO comment added.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Jens Axboe <axboe@kernel.dk>

10 years agoloop: use BIO list management functions
Akinobu Mita [Fri, 17 Apr 2009 06:41:21 +0000]
loop: use BIO list management functions

Now that the bio list management stuff is generic, convert loop to use
bio lists instead of its own private bio list implementation.

Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

10 years agohd: fix locking
Tejun Heo [Tue, 28 Apr 2009 03:38:33 +0000]
hd: fix locking

hd dance around local irq and HD_IRQ enable without achieving much.
It ends up transferring data from irq handler with both local irq and
HD_IRQ disabled.  The only place it actually does something is while
transferring the first block of a request which it does with HD_IRQ
disabled but local irq enabled.

Unfortunately, the dancing is horribly broken from locking POV.  IRQ
and timeout handlers access block queue without grabbing the queue
lock and running the driver in SMP configuration crashes the whole
machine pretty quickly.

Remove meaningless irq enable/disable dancing and add proper locking
in issue, irq and timeout paths.

Signed-off-by: Tejun Heo <tj@kernel.org>

10 years agomg_disk: fix CONFIG_LBD=y warning
Bartlomiej Zolnierkiewicz [Tue, 28 Apr 2009 03:38:33 +0000]
mg_disk: fix CONFIG_LBD=y warning

drivers/block/mg_disk.c: In function ‘mg_dump_status’:
drivers/block/mg_disk.c:265: warning: format ‘%ld’ expects type ‘long int’, but
argument 2 has type ‘sector_t’

[ Impact: kill build warning ]

Cc: unsik Kim <donari75@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

10 years agomg_disk: fix locking
Tejun Heo [Tue, 28 Apr 2009 03:38:32 +0000]
mg_disk: fix locking

IRQ and timeout handlers call functions which expect locked queue lock
without locking it.  Fix it.

While at it, convert 0s used as null pointer constant to NULLs.

[ Impact: fix locking, cleanup ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: unsik Kim <donari75@gmail.com>

10 years agosparc: convert to use __HEAD and HEAD_TEXT macros.
Tim Abbott [Sun, 26 Apr 2009 02:11:08 +0000]
sparc: convert to use __HEAD and HEAD_TEXT macros.

This has the consequence of changing the section name use for head
code from ".text.head" to ".head.text".  Since this commit changes all
users in the architecture, this change should be harmless.

Signed-off-by: Tim Abbott <tabbott@mit.edu>
Cc: David S. Miller <davem@davemloft.net>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agosh: convert to use __HEAD and HEAD_TEXT macros.
Tim Abbott [Sun, 26 Apr 2009 02:11:07 +0000]
sh: convert to use __HEAD and HEAD_TEXT macros.

This has the consequence of changing the section name use for head
code from ".text.head" to ".head.text".  Since this commit changes all
users in the architecture, this change should be harmless.

Signed-off-by: Tim Abbott <tabbott@mit.edu>
Cc: Paul Mundt <lethal@linux-sh.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agos390: convert to use __HEAD and HEAD_TEXT macros.
Tim Abbott [Sun, 26 Apr 2009 02:11:06 +0000]
s390: convert to use __HEAD and HEAD_TEXT macros.

This has the consequence of changing the section name use for head
code from ".text.head" to ".head.text".  Since this commit changes all
users in the architecture, this change should be harmless.

Signed-off-by: Tim Abbott <tabbott@mit.edu>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agopowerpc: convert to use __HEAD and HEAD_TEXT macros.
Tim Abbott [Sun, 26 Apr 2009 02:11:05 +0000]
powerpc: convert to use __HEAD and HEAD_TEXT macros.

This has the consequence of changing the section name use for head
code from ".text.head" to ".head.text".  Since this commit changes all
users in the architecture, this change should be harmless.

Signed-off-by: Tim Abbott <tabbott@mit.edu>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agomn10300: convert to use __HEAD and HEAD_TEXT macros.
Tim Abbott [Sun, 26 Apr 2009 02:11:04 +0000]
mn10300: convert to use __HEAD and HEAD_TEXT macros.

This has the consequence of changing the section name use for head
code from ".text.head" to ".head.text".  Since this commit changes all
users in the architecture, this change should be harmless.

Signed-off-by: Tim Abbott <tabbott@mit.edu>
Cc: David Howells <dhowells@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agom68k: convert to use __HEAD and HEAD_TEXT macros.
Tim Abbott [Sun, 26 Apr 2009 02:11:03 +0000]
m68k: convert to use __HEAD and HEAD_TEXT macros.

This has the consequence of changing the section name use for head
code from ".text.head" to ".head.text".  Since this commit changes all
users in the architecture, this change should be harmless.

Signed-off-by: Tim Abbott <tabbott@mit.edu>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agom32r: convert to use __HEAD and HEAD_TEXT macros.
Tim Abbott [Sun, 26 Apr 2009 02:11:02 +0000]
m32r: convert to use __HEAD and HEAD_TEXT macros.

This has the consequence of changing the section name use for head
code from ".text.head" to ".head.text".  Since this commit changes all
users in the architecture, this change should be harmless.

Signed-off-by: Tim Abbott <tabbott@mit.edu>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agofrv: convert frv to use __HEAD and HEAD_TEXT macros.
Tim Abbott [Sun, 26 Apr 2009 02:10:59 +0000]
frv: convert frv to use __HEAD and HEAD_TEXT macros.

This has the consequence of changing the section name use for head
code from ".text.head" to ".head.text".  Since this commit changes all
users in the architecture, this change should be harmless.

Signed-off-by: Tim Abbott <tabbott@mit.edu>
Cc: David Howells <dhowells@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoalpha: convert to use __HEAD and HEAD_TEXT macros.
Tim Abbott [Sun, 26 Apr 2009 02:10:58 +0000]
alpha: convert to use __HEAD and HEAD_TEXT macros.

This has the consequence of changing the section name use for head
code from ".text.head" to ".head.text".  Since this commit changes all
users in the architecture, this change should be harmless.

Signed-off-by: Tim Abbott <tabbott@mit.edu>
Cc: Richard Henderson <rth@twiddle.net>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoxtensa: convert to use __HEAD and HEAD_TEXT macros.
Tim Abbott [Sun, 26 Apr 2009 02:10:57 +0000]
xtensa: convert to use __HEAD and HEAD_TEXT macros.

Signed-off-by: Tim Abbott <tabbott@mit.edu>
Cc: Chris Zankel <chris@zankel.net>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoAdd new HEAD_TEXT_SECTION macro.
Tim Abbott [Sun, 26 Apr 2009 02:10:56 +0000]
Add new HEAD_TEXT_SECTION macro.

This patch is preparation for replacing all uses of ".head.text" or
".text.head" in the kernel with macros, so that the section name can
later be changed without having to touch a lot of the kernel.

Since some linker scripts do more complex things than referencing
HEAD_TEXT, we add a HEAD_TEXT_SECTION macro that just contains the
actual name.

I've defined HEAD_TEXT_SECTION in a new header,
include/linux/section-names.h, so that this section name only needs to
appear in one place.  I anticipate creating similar macro structures
for a number of other section names.

The long-term goal here is to be able to change the kernel's magic
section names to those that are compatible with -ffunction-sections
-fdata-sections.  This requires renaming all magic sections with names
of the form ".text.foo".

Signed-off-by: Tim Abbott <tabbott@mit.edu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoPM/Hibernate: Fix waiting for image device to appear on resume
Rafael J. Wysocki [Fri, 24 Apr 2009 22:16:06 +0000]
PM/Hibernate: Fix waiting for image device to appear on resume

Commit c751085943362143f84346d274e0011419c84202 ("PM/Hibernate: Wait for
SCSI devices scan to complete during resume") added a call to
scsi_complete_async_scans() to software_resume(), so that it waited for
the SCSI scanning to complete, but the call was added at a wrong place.

Namely, it should have been added after wait_for_device_probe(), which
is called only if the image partition hasn't been specified yet.  Also,
it's reasonable to check if the image partition is present and only wait
for the device probing and SCSI scanning to complete if it is not the
case.

Additionally, since noresume is checked right at the beginning of
software_resume() and the function returns immediately if it's set, it
doesn't make sense to check it once again later.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>