8 years agostaging: drm/omap: crtc/encoder/fb destroy cleanups
Rob Clark [Sat, 10 Dec 2011 05:26:07 +0000]
staging: drm/omap: crtc/encoder/fb destroy cleanups

Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agostaging: drm/omap: allocation fail check
Rob Clark [Sat, 10 Dec 2011 05:26:06 +0000]
staging: drm/omap: allocation fail check

Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agoStaging: VME: PIO2: Add GPIOLIB dependancy
Martyn Welch [Mon, 12 Dec 2011 17:04:06 +0000]
Staging: VME: PIO2: Add GPIOLIB dependancy

The PIO2 driver errors when GPIOLIB, on which it depends, is not enabled.

Add dependancy when selecting the PIO2.

Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agoMAINTAINERS: staging: tty: Update F: patterns
Joe Perches [Fri, 9 Dec 2011 08:12:49 +0000]
MAINTAINERS: staging: tty: Update F: patterns

commit 51c9d654c2d ("Staging: delete tty drivers")
removed the files, delete the sections too.

CC: Greg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agoMAINTAINERS: staging: westbridge: Delete section
Joe Perches [Fri, 9 Dec 2011 08:12:50 +0000]
MAINTAINERS: staging: westbridge: Delete section

commit 78f23926dff9 ("Staging: delete westbridge code")
deleted the files, delete the section.

CC: David Cross <odc@cypress.com>
CC: Greg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agoMAINTAINERS: brcm80211: Update F: pattern
Joe Perches [Fri, 9 Dec 2011 08:12:52 +0000]
MAINTAINERS: brcm80211: Update F: pattern

commit fc2d6e573be
("staging: brcm80211: remove brcm80211 driver from the staging tree")
moved the files, update the F: pattern.

CC: John W. Linville <linville@tuxdriver.com>
CC: Arend van Spriel <arend@broadcom.com>
CC: Greg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agoMAINTAINERS: Delete generic_serial section
Joe Perches [Fri, 9 Dec 2011 08:12:53 +0000]
MAINTAINERS: Delete generic_serial section

commit bb2a97e9ccd ("Staging: delete generic_serial drivers")
removed the files, delete the section.

CC: Greg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agoMAINTAINERS: update xgifb maintainer's e-mail address
Aaro Koskinen [Fri, 9 Dec 2011 18:22:04 +0000]
MAINTAINERS: update xgifb maintainer's e-mail address

All patches sent to the maintainer address bounce:

   Diagnostic-Code: smtp; 550 5.1.1 <apatard@mandriva.com>: Recipient address
       rejected: User unknown in virtual mailbox table

The address found in drivers/staging/xgifb/TODO seems to work better.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: arnaud.patard@rtp-net.org
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agostaging: line6: fixed ALSA/PCM interaction
Markus Grabner [Sat, 10 Dec 2011 01:12:32 +0000]
staging: line6: fixed ALSA/PCM interaction

The PCM subsystem in the Line6 driver is mainly used for PCM playback and
capture by ALSA, but also has other tasks, most notably providing a
low-latency software monitor for devices which don't support hardware
monitoring (e.g., the TonePort series). This patch makes ALSA "play nicely"
with the other components, i.e., prevents it from resetting the isochronous
USB transfer while other PCM tasks (software monitoring) are running.

Signed-off-by: Markus Grabner <grabner@icg.tugraz.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agostaging: line6: wait for urbs in snd_line6_prepare()
Stefan Hajnoczi [Sat, 10 Dec 2011 01:12:31 +0000]
staging: line6: wait for urbs in snd_line6_prepare()

The .trigger() pcm callbacks are not allowed to block and cannot wait
until urbs have completed.  We need to ensure that stopping, preparing,
and then restarting a stream always works.

Currently the driver will sometimes return -EBUSY when restarting the
stream because urbs have not completed yet.  This can be triggered by
jackd from userspace.

The solution is to wait on urbs in the .prepare() pcm callback since
blocking is allowed in that callback.  This guarantees that all urbs are
quiesced and ready to be submitted when the start trigger callback is
invoked.

Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Markus Grabner <grabner@icg.tugraz.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agostaging: line6: eliminate useless NULL checks
Stefan Hajnoczi [Sat, 10 Dec 2011 01:12:30 +0000]
staging: line6: eliminate useless NULL checks

The line6 driver checks struct field addresses for NULL where it does
not make sense to do so.  The struct has already been checked for NULL
and there is no value in checking the first field's address too.

Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Markus Grabner <grabner@icg.tugraz.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agostaging: line6: eliminate useless index_out variable
Stefan Hajnoczi [Sat, 10 Dec 2011 01:12:29 +0000]
staging: line6: eliminate useless index_out variable

Playback urbs use the index_out counter to decide which part of the
playback buffer to use.  Since the urb already has a unique index in
range [0, LINE6_ISO_BUFFERS) there is no need to keep a separate
counter.

Use the urb index instead.  This also eliminates the possibility of two
urbs using the same playback buffer space if they ever complete
out-of-order for some reason.

Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Markus Grabner <grabner@icg.tugraz.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agostaging: line6: fix playback urb transfer buffer calculation
Stefan Hajnoczi [Sat, 10 Dec 2011 01:12:28 +0000]
staging: line6: fix playback urb transfer buffer calculation

The playback urb transfer buffer calculation does not factor in
LINE6_ISO_PACKETS.  Buffer memory is organized like this in the driver:

  Buffer 0                 Buffer 1                 ...
  [Packet 0, Packet 1, ...][Packet 0, Packet 1, ...][Packet 0, ...]

However, we're lucky that LINE6_ISO_PACKETS is currently defined as 1 so
this patch does not change any behavior.  It's still worth including
this fix in case the LINE6_ISO_PACKETS value is changed in the future.

Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Markus Grabner <grabner@icg.tugraz.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agostaging: line6: fix memory leak in .hw_params()
Stefan Hajnoczi [Sat, 10 Dec 2011 01:12:27 +0000]
staging: line6: fix memory leak in .hw_params()

The .hw_params() pcm callback can be invoked multiple times in a row.
Ensure that the URB data buffer is only allocated once.

Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Markus Grabner <grabner@icg.tugraz.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agoMerge 3.2-rc5 into staging-next
Greg Kroah-Hartman [Sat, 10 Dec 2011 03:01:27 +0000]
Merge 3.2-rc5 into staging-next

This resolves the conflict in the
drivers/staging/iio/industrialio-core.c file due to two different
changes made to resolve the same problem.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agonet/hyperv: Fix the stop/wake queue mechanism
Haiyang Zhang [Fri, 2 Dec 2011 19:56:25 +0000]
net/hyperv: Fix the stop/wake queue mechanism

The ring buffer is only used to pass meta data for outbound packets. The
actual payload is accessed by DMA from the host. So the stop/wake queue
mechanism based on counting and comparing number of pages sent v.s. number
of pages in the ring buffer is wrong. Also, there is a race condition in
the stop/wake queue calls, which can stop xmit queue forever.

The new stop/wake queue mechanism is based on the actual bytes used by
outbound packets in the ring buffer. The check for number of outstanding
sends after stop queue prevents the race condition that can cause wake
queue happening earlier than stop queue.

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Reported-by: Long Li <longli@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agoLinux 3.2-rc5
Linus Torvalds [Fri, 9 Dec 2011 23:09:32 +0000]
Linux 3.2-rc5

8 years agoMerge git://git.samba.org/sfrench/cifs-2.6
Linus Torvalds [Fri, 9 Dec 2011 22:45:44 +0000]
Merge git://git.samba.org/sfrench/cifs-2.6

* git://git.samba.org/sfrench/cifs-2.6:
  cifs: check for NULL last_entry before calling cifs_save_resume_key
  cifs: attempt to freeze while looping on a receive attempt
  cifs: Fix sparse warning when calling cifs_strtoUCS
  CIFS: Add descriptions to the brlock cache functions

8 years agoMerge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 9 Dec 2011 22:45:12 +0000]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, efi: Calling __pa() with an ioremap()ed address is invalid
  x86, hpet: Immediately disable HPET timer 1 if rtc irq is masked
  x86/intel_mid: Kconfig select fix
  x86/intel_mid: Fix the Kconfig for MID selection

8 years agoMerge branch 'spi/for-3.2' of git://git.pengutronix.de/git/wsa/linux-2.6
Linus Torvalds [Fri, 9 Dec 2011 22:41:50 +0000]
Merge branch 'spi/for-3.2' of git://git.pengutronix.de/git/wsa/linux-2.6

* 'spi/for-3.2' of git://git.pengutronix.de/git/wsa/linux-2.6:
  spi/gpio: fix section mismatch warning
  spi/fsl-espi: disable CONFIG_SPI_FSL_ESPI=m build
  spi/nuc900: Include linux/module.h
  spi/ath79: fix compile error due to missing include

8 years agostaging:iio:dac:ad5791: Add id entry for the ad5790
Lars-Peter Clausen [Fri, 9 Dec 2011 16:12:42 +0000]
staging:iio:dac:ad5791: Add id entry for the ad5790

The ad5790 has a binary compatible interface to ad5791, so we just have to add
an entry to the drivers device table to add support for it.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agoMerge branch 'for-linus' of git://neil.brown.name/md
Linus Torvalds [Fri, 9 Dec 2011 16:18:08 +0000]
Merge branch 'for-linus' of git://neil.brown.name/md

* 'for-linus' of git://neil.brown.name/md:
  md: raid5 crash during degradation
  md/raid5: never wait for bad-block acks on failed device.
  md: ensure new badblocks are handled promptly.
  md: bad blocks shouldn't cause a Blocked status on a Faulty device.
  md: take a reference to mddev during sysfs access.
  md: refine interpretation of "hold_active == UNTIL_IOCTL".
  md/lock: ensure updates to page_attrs are properly locked.

8 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile
Linus Torvalds [Fri, 9 Dec 2011 16:08:57 +0000]
Merge git://git./linux/kernel/git/cmetcalf/linux-tile

* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  arch/tile: use new generic {enable,disable}_percpu_irq() routines
  drivers/net/ethernet/tile: use skb_frag_page() API
  asm-generic/unistd.h: support new process_vm_{readv,write} syscalls
  arch/tile: fix double-free bug in homecache_free_pages()
  arch/tile: add a few #includes and an EXPORT to catch up with kernel changes.

8 years agoMerge branch 'iommu/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/joro...
Linus Torvalds [Fri, 9 Dec 2011 16:08:14 +0000]
Merge branch 'iommu/fixes' of git://git./linux/kernel/git/joro/iommu

* 'iommu/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  MAINTAINERS: Update amd-iommu F: patterns
  iommu/amd: Fix typo in kernel-parameters.txt
  iommu/msm: Fix compile error in mach-msm/devices-iommu.c
  Fix comparison using wrong pointer variable in dma debug code

8 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Linus Torvalds [Fri, 9 Dec 2011 16:07:42 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda/realtek - Fix lost speaker volume controls
  ALSA: hda/realtek - Create "Bass Speaker" for two speaker pins
  ALSA: hda/realtek - Don't create extra controls with channel suffix
  ALSA: hda - Fix remaining VREF mute-LED NID check in post-3.1 changes
  ALSA: hda - Fix GPIO LED setup for IDT 92HD75 codecs
  ASoC: Provide a more complete DMA driver stub
  ASoC: Remove references to corgi and spitz from machine driver document
  ASoC: Make SND_SOC_MX27VIS_AIC32X4 depend on I2C
  ASoC: Fix dependency for SND_SOC_RAUMFELD and SND_PXA2XX_SOC_HX4700
  ASoC: uda1380: Return proper error in uda1380_modinit failure path
  ASoC: kirkwood: Make SND_KIRKWOOD_SOC_OPENRD and SND_KIRKWOOD_SOC_T5325 depend on I2C
  ASoC: Mark WM8994 ADC muxes as virtual
  ALSA: hda/realtek - Fix Oops in alc_mux_select()
  ALSA: sis7019 - give slow codecs more time to reset

8 years agoMerge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 9 Dec 2011 16:07:24 +0000]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf: Do no try to schedule task events if there are none
  lockdep, kmemcheck: Annotate ->lock in lockdep_init_map()
  perf header: Use event_name() to get an event name
  perf stat: Failure with "Operation not supported"

8 years agosys_getppid: add missing rcu_dereference
Mandeep Singh Baines [Thu, 8 Dec 2011 22:34:44 +0000]
sys_getppid: add missing rcu_dereference

In order to safely dereference current->real_parent inside an
rcu_read_lock, we need an rcu_dereference.

Signed-off-by: Mandeep Singh Baines <msb@chromium.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agorapidio/tsi721: modify PCIe capability settings
Alexandre Bounine [Thu, 8 Dec 2011 22:34:42 +0000]
rapidio/tsi721: modify PCIe capability settings

Modify initialization of PCIe capability registers in Tsi721 mport driver:
 - change Completion Timeout value to avoid unexpected data transfer
   aborts during intensive traffic.
 - replace hardcoded offset of PCIe capability block by making it use the
   common function.

This patch is applicable to kernel versions starting from 3.2-rc1.

Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agorapidio/tsi721: fix mailbox resource reporting
Alexandre Bounine [Thu, 8 Dec 2011 22:34:36 +0000]
rapidio/tsi721: fix mailbox resource reporting

Bug fix for Tsi721 RapidIO mport driver: Tsi721 supports four RapidIO
mailboxes (MBOX0 - MBOX3) as defined by RapidIO specification.  Mailbox
resources has to be properly reported to allow use of all available
mailboxes (initial version reports only MBOX0).

This patch is applicable to kernel versions staring from 3.2-rc1.

Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agorapidio/tsi721: switch to dma_zalloc_coherent
Alexandre Bounine [Thu, 8 Dec 2011 22:34:35 +0000]
rapidio/tsi721: switch to dma_zalloc_coherent

Replace the pair dma_alloc_coherent()+memset() with the new
dma_zalloc_coherent() added by Andrew Morton for kernel version 3.2

Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoprocfs: do not overflow get_{idle,iowait}_time for nohz
Michal Hocko [Thu, 8 Dec 2011 22:34:32 +0000]
procfs: do not overflow get_{idle,iowait}_time for nohz

Since commit a25cac5198d4 ("proc: Consider NO_HZ when printing idle and
iowait times") we are reporting idle/io_wait time also while a CPU is
tickless.  We rely on get_{idle,iowait}_time functions to retrieve
proper data.

These functions, however, use usecs_to_cputime to translate micro
seconds time to cputime64_t.  This is just an alias to usecs_to_jiffies
which reduces the data type from u64 to unsigned int and also checks
whether the given parameter overflows jiffies_to_usecs(MAX_JIFFY_OFFSET)
and returns MAX_JIFFY_OFFSET in that case.

When we overflow depends on CONFIG_HZ but especially for CONFIG_HZ_300
it is quite low (1431649781) so we are getting MAX_JIFFY_OFFSET for
>3000s! until we overflow unsigned int.  Just for reference
CONFIG_HZ_100 has an overflow window around 20s, CONFIG_HZ_250 ~8s and
CONFIG_HZ_1000 ~2s.

This results in a bug when people saw [h]top going mad reporting 100%
CPU usage even though there was basically no CPU load.  The reason was
simply that /proc/stat stopped reporting idle/io_wait changes (and
reported MAX_JIFFY_OFFSET) and so the only change happening was for user
system time.

Let's use nsecs_to_jiffies64 instead which doesn't reduce the precision
to 32b type and it is much more appropriate for cumulative time values
(unlike usecs_to_jiffies which intended for timeout calculations).

Signed-off-by: Michal Hocko <mhocko@suse.cz>
Tested-by: Artem S. Tashkinov <t.artem@mailcity.com>
Cc: Dave Jones <davej@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agomm: vmalloc: check for page allocation failure before vmlist insertion
Mel Gorman [Thu, 8 Dec 2011 22:34:30 +0000]
mm: vmalloc: check for page allocation failure before vmlist insertion

Commit f5252e00 ("mm: avoid null pointer access in vm_struct via
/proc/vmallocinfo") adds newly allocated vm_structs to the vmlist after
it is fully initialised.  Unfortunately, it did not check that
__vmalloc_area_node() successfully populated the area.  In the event of
allocation failure, the vmalloc area is freed but the pointer to freed
memory is inserted into the vmlist leading to a a crash later in
get_vmalloc_info().

This patch adds a check for ____vmalloc_area_node() failure within
__vmalloc_node_range.  It does not use "goto fail" as in the previous
error path as a warning was already displayed by __vmalloc_area_node()
before it called vfree in its failure path.

Credit goes to Luciano Chavez for doing all the real work of identifying
exactly where the problem was.

Signed-off-by: Mel Gorman <mgorman@suse.de>
Reported-by: Luciano Chavez <lnx1138@linux.vnet.ibm.com>
Tested-by: Luciano Chavez <lnx1138@linux.vnet.ibm.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: <stable@vger.kernel.org> [3.1.x+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agomm: Ensure that pfn_valid() is called once per pageblock when reserving pageblocks
Michal Hocko [Thu, 8 Dec 2011 22:34:27 +0000]
mm: Ensure that pfn_valid() is called once per pageblock when reserving pageblocks

setup_zone_migrate_reserve() expects that zone->start_pfn starts at
pageblock_nr_pages aligned pfn otherwise we could access beyond an
existing memblock resulting in the following panic if
CONFIG_HOLES_IN_ZONE is not configured and we do not check pfn_valid:

  IP: [<c02d331d>] setup_zone_migrate_reserve+0xcd/0x180
  *pdpt = 0000000000000000 *pde = f000ff53f000ff53
  Oops: 0000 [#1] SMP
  Pid: 1, comm: swapper Not tainted 3.0.7-0.7-pae #1 VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform
  EIP: 0060:[<c02d331d>] EFLAGS: 00010006 CPU: 0
  EIP is at setup_zone_migrate_reserve+0xcd/0x180
  EAX: 000c0000 EBX: f5801fc0 ECX: 000c0000 EDX: 00000000
  ESI: 000c01fe EDI: 000c01fe EBP: 00140000 ESP: f2475f58
  DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
  Process swapper (pid: 1, ti=f2474000 task=f2472cd0 task.ti=f2474000)
  Call Trace:
  [<c02d389c>] __setup_per_zone_wmarks+0xec/0x160
  [<c02d3a1f>] setup_per_zone_wmarks+0xf/0x20
  [<c08a771c>] init_per_zone_wmark_min+0x27/0x86
  [<c020111b>] do_one_initcall+0x2b/0x160
  [<c086639d>] kernel_init+0xbe/0x157
  [<c05cae26>] kernel_thread_helper+0x6/0xd
  Code: a5 39 f5 89 f7 0f 46 fd 39 cf 76 40 8b 03 f6 c4 08 74 32 eb 91 90 89 c8 c1 e8 0e 0f be 80 80 2f 86 c0 8b 14 85 60 2f 86 c0 89 c8 <2b> 82 b4 12 00 00 c1 e0 05 03 82 ac 12 00 00 8b 00 f6 c4 08 0f
  EIP: [<c02d331d>] setup_zone_migrate_reserve+0xcd/0x180 SS:ESP 0068:f2475f58
  CR2: 00000000000012b4

We crashed in pageblock_is_reserved() when accessing pfn 0xc0000 because
highstart_pfn = 0x36ffe.

The issue was introduced in 3.0-rc1 by 6d3163ce ("mm: check if any page
in a pageblock is reserved before marking it MIGRATE_RESERVE").

Make sure that start_pfn is always aligned to pageblock_nr_pages to
ensure that pfn_valid s always called at the start of each pageblock.
Architectures with holes in pageblocks will be correctly handled by
pfn_valid_within in pageblock_is_reserved.

Signed-off-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Mel Gorman <mgorman@suse.de>
Tested-by: Dang Bo <bdang@vmware.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Arve Hjnnevg <arve@android.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Dave Hansen <dave@linux.vnet.ibm.com>
Cc: <stable@vger.kernel.org> [3.0+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agomm/migrate.c: pair unlock_page() and lock_page() when migrating huge pages
Hillf Danton [Thu, 8 Dec 2011 22:34:20 +0000]
mm/migrate.c: pair unlock_page() and lock_page() when migrating huge pages

Avoid unlocking and unlocked page if we failed to lock it.

Signed-off-by: Hillf Danton <dhillf@gmail.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agothp: set compound tail page _count to zero
Youquan Song [Thu, 8 Dec 2011 22:34:18 +0000]
thp: set compound tail page _count to zero

Commit 70b50f94f1644 ("mm: thp: tail page refcounting fix") keeps all
page_tail->_count zero at all times.  But the current kernel does not
set page_tail->_count to zero if a 1GB page is utilized.  So when an
IOMMU 1GB page is used by KVM, it wil result in a kernel oops because a
tail page's _count does not equal zero.

  kernel BUG at include/linux/mm.h:386!
  invalid opcode: 0000 [#1] SMP
  Call Trace:
    gup_pud_range+0xb8/0x19d
    get_user_pages_fast+0xcb/0x192
    ? trace_hardirqs_off+0xd/0xf
    hva_to_pfn+0x119/0x2f2
    gfn_to_pfn_memslot+0x2c/0x2e
    kvm_iommu_map_pages+0xfd/0x1c1
    kvm_iommu_map_memslots+0x7c/0xbd
    kvm_iommu_map_guest+0xaa/0xbf
    kvm_vm_ioctl_assigned_device+0x2ef/0xa47
    kvm_vm_ioctl+0x36c/0x3a2
    do_vfs_ioctl+0x49e/0x4e4
    sys_ioctl+0x5a/0x7c
    system_call_fastpath+0x16/0x1b
  RIP  gup_huge_pud+0xf2/0x159

Signed-off-by: Youquan Song <youquan.song@intel.com>
Reviewed-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agothp: add compound tail page _mapcount when mapped
Youquan Song [Thu, 8 Dec 2011 22:34:16 +0000]
thp: add compound tail page _mapcount when mapped

With the 3.2-rc kernel, IOMMU 2M pages in KVM works.  But when I tried
to use IOMMU 1GB pages in KVM, I encountered an oops and the 1GB page
failed to be used.

The root cause is that 1GB page allocation calls gup_huge_pud() while 2M
page calls gup_huge_pmd.  If compound pages are used and the page is a
tail page, gup_huge_pmd() increases _mapcount to record tail page are
mapped while gup_huge_pud does not do that.

So when the mapped page is relesed, it will result in kernel oops
because the page is not marked mapped.

This patch add tail process for compound page in 1GB huge page which
keeps the same process as 2M page.

Reproduce like:
1. Add grub boot option: hugepagesz=1G hugepages=8
2. mount -t hugetlbfs -o pagesize=1G hugetlbfs /dev/hugepages
3. qemu-kvm -m 2048 -hda os-kvm.img -cpu kvm64 -smp 4 -mem-path /dev/hugepages
-net none -device pci-assign,host=07:00.1

  kernel BUG at mm/swap.c:114!
  invalid opcode: 0000 [#1] SMP
  Call Trace:
    put_page+0x15/0x37
    kvm_release_pfn_clean+0x31/0x36
    kvm_iommu_put_pages+0x94/0xb1
    kvm_iommu_unmap_memslots+0x80/0xb6
    kvm_assign_device+0xba/0x117
    kvm_vm_ioctl_assigned_device+0x301/0xa47
    kvm_vm_ioctl+0x36c/0x3a2
    do_vfs_ioctl+0x49e/0x4e4
    sys_ioctl+0x5a/0x7c
    system_call_fastpath+0x16/0x1b
  RIP  put_compound_page+0xd4/0x168

Signed-off-by: Youquan Song <youquan.song@intel.com>
Reviewed-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoprintk: avoid double lock acquire
Peter Zijlstra [Thu, 8 Dec 2011 22:34:13 +0000]
printk: avoid double lock acquire

Commit 4f2a8d3cf5e ("printk: Fix console_sem vs logbuf_lock unlock race")
introduced another silly bug where we would want to acquire an already
held lock.  Avoid this.

Reported-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agomemcg: update maintainers
KAMEZAWA Hiroyuki [Thu, 8 Dec 2011 22:34:10 +0000]
memcg: update maintainers

More players joined to memory cgroup developments and Johannes' great work
changed internal design of memory cgroup dramatically.  And he will do
more works.  Michal Hokko did many bug fixes and know memory cgroup very
well.  Daisuke Nishimura helped us very much but he seems busy now.
Thanks to his works.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agodrivers/rtc/rtc-s3c.c: fix driver clock enable/disable balance issues
Jonghwan Choi [Thu, 8 Dec 2011 22:34:02 +0000]
drivers/rtc/rtc-s3c.c: fix driver clock enable/disable balance issues

If an error occurs after the clock is enabled, the enable/disable state
can become unbalanced.

Signed-off-by: Jonghwan Choi <jhbird.choi@samsung.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoCREDITS: update Kees's expired fingerprint and fix details
Kees Cook [Thu, 8 Dec 2011 22:34:00 +0000]
CREDITS: update Kees's expired fingerprint and fix details

Small clean-up for my CREDITS entry; the GPG fingerprint was not up to
date, so I fixed other details at the same time too.

Signed-off-by: Kees Cook <kees@outflux.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agothp: reduce khugepaged freezing latency
Andrea Arcangeli [Thu, 8 Dec 2011 22:33:57 +0000]
thp: reduce khugepaged freezing latency

khugepaged can sometimes cause suspend to fail, requiring that the user
retry the suspend operation.

Use wait_event_freezable_timeout() instead of
schedule_timeout_interruptible() to avoid missing freezer wakeups.  A
try_to_freeze() would have been needed in the khugepaged_alloc_hugepage
tight loop too in case of the allocation failing repeatedly, and
wait_event_freezable_timeout will provide it too.

khugepaged would still freeze just fine by trying again the next minute
but it's better if it freezes immediately.

Reported-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Tested-by: Jiri Slaby <jslaby@suse.cz>
Cc: Tejun Heo <tj@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com>
Cc: "Rafael J. Wysocki" <rjw@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agofs/proc/meminfo.c: fix compilation error
Claudio Scordino [Thu, 8 Dec 2011 22:33:56 +0000]
fs/proc/meminfo.c: fix compilation error

Fix the error message "directives may not be used inside a macro argument"
which appears when the kernel is compiled for the cris architecture.

Signed-off-by: Claudio Scordino <claudio@evidence.eu.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agovmscan: use atomic-long for shrinker batching
Konstantin Khlebnikov [Thu, 8 Dec 2011 22:33:54 +0000]
vmscan: use atomic-long for shrinker batching

Use atomic-long operations instead of looping around cmpxchg().

[akpm@linux-foundation.org: massage atomic.h inclusions]
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Dave Chinner <david@fromorbit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agovmscan: fix initial shrinker size handling
Konstantin Khlebnikov [Thu, 8 Dec 2011 22:33:51 +0000]
vmscan: fix initial shrinker size handling

A shrinker function can return -1, means that it cannot do anything
without a risk of deadlock.  For example prune_super() does this if it
cannot grab a superblock refrence, even if nr_to_scan=0.  Currently we
interpret this -1 as a ULONG_MAX size shrinker and evaluate `total_scan'
according to this.  So the next time around this shrinker can cause
really big pressure.  Let's skip such shrinkers instead.

Also make total_scan signed, otherwise the check (total_scan < 0) below
never works.

Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Dave Chinner <david@fromorbit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoMAINTAINERS: Update amd-iommu F: patterns
Joe Perches [Fri, 9 Dec 2011 04:21:40 +0000]
MAINTAINERS: Update amd-iommu F: patterns

Commit 29b68415e335 ("x86: amd_iommu: move to drivers/iommu/")
moved the files, update the patterns.

CC: Ohad Ben-Cohen <ohad@wizery.com>
CC: Joerg Roedel <joerg.roedel@amd.com>

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>

8 years agox86, efi: Calling __pa() with an ioremap()ed address is invalid
Matt Fleming [Fri, 18 Nov 2011 13:09:11 +0000]
x86, efi: Calling __pa() with an ioremap()ed address is invalid

If we encounter an efi_memory_desc_t without EFI_MEMORY_WB set
in ->attribute we currently call set_memory_uc(), which in turn
calls __pa() on a potentially ioremap'd address.

On CONFIG_X86_32 this is invalid, resulting in the following
oops on some machines:

  BUG: unable to handle kernel paging request at f7f22280
  IP: [<c10257b9>] reserve_ram_pages_type+0x89/0x210
  [...]

  Call Trace:
   [<c104f8ca>] ? page_is_ram+0x1a/0x40
   [<c1025aff>] reserve_memtype+0xdf/0x2f0
   [<c1024dc9>] set_memory_uc+0x49/0xa0
   [<c19334d0>] efi_enter_virtual_mode+0x1c2/0x3aa
   [<c19216d4>] start_kernel+0x291/0x2f2
   [<c19211c7>] ? loglevel+0x1b/0x1b
   [<c19210bf>] i386_start_kernel+0xbf/0xc8

A better approach to this problem is to map the memory region
with the correct attributes from the start, instead of modifying
it after the fact. The uncached case can be handled by
ioremap_nocache() and the cached by ioremap_cache().

Despite first impressions, it's not possible to use
ioremap_cache() to map all cached memory regions on
CONFIG_X86_64 because EFI_RUNTIME_SERVICES_DATA regions really
don't like being mapped into the vmalloc space, as detailed in
the following bug report,

https://bugzilla.redhat.com/show_bug.cgi?id=748516

Therefore, we need to ensure that any EFI_RUNTIME_SERVICES_DATA
regions are covered by the direct kernel mapping table on
CONFIG_X86_64. To accomplish this we now map E820_RESERVED_EFI
regions via the direct kernel mapping with the initial call to
init_memory_mapping() in setup_arch(), whereas previously these
regions wouldn't be mapped if they were after the last E820_RAM
region until efi_ioremap() was called. Doing it this way allows
us to delete efi_ioremap() completely.

Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Huang Ying <huang.ying.caritas@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/1321621751-3650-1-git-send-email-matt@console-pimps.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>

8 years agocifs: check for NULL last_entry before calling cifs_save_resume_key
Jeff Layton [Fri, 2 Dec 2011 01:23:34 +0000]
cifs: check for NULL last_entry before calling cifs_save_resume_key

Prior to commit eaf35b1, cifs_save_resume_key had some NULL pointer
checks at the top. It turns out that at least one of those NULL
pointer checks is needed after all.

When the LastNameOffset in a FIND reply appears to be beyond the end of
the buffer, CIFSFindFirst and CIFSFindNext will set srch_inf.last_entry
to NULL. Since eaf35b1, the code will now oops in this situation.

Fix this by having the callers check for a NULL last entry pointer
before calling cifs_save_resume_key. No change is needed for the
call site in cifs_readdir as it's not reachable with a NULL
current_entry pointer.

This should fix:

    https://bugzilla.redhat.com/show_bug.cgi?id=750247

Cc: stable@vger.kernel.org
Cc: Christoph Hellwig <hch@infradead.org>
Reported-by: Adam G. Metzler <adamgmetzler@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>

8 years agocifs: attempt to freeze while looping on a receive attempt
Jeff Layton [Fri, 2 Dec 2011 01:22:41 +0000]
cifs: attempt to freeze while looping on a receive attempt

In the recent overhaul of the demultiplex thread receive path, I
neglected to ensure that we attempt to freeze on each pass through the
receive loop.

Reported-and-Tested-by: Woody Suwalski <terraluna977@gmail.com>
Reported-and-Tested-by: Adam Williamson <awilliam@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>

8 years agocifs: Fix sparse warning when calling cifs_strtoUCS
Steve French [Thu, 10 Nov 2011 18:48:20 +0000]
cifs: Fix sparse warning when calling cifs_strtoUCS

Fix sparse endian check warning while calling cifs_strtoUCS

CHECK   fs/cifs/smbencrypt.c
fs/cifs/smbencrypt.c:216:37: warning: incorrect type in argument 1
(different base types)
fs/cifs/smbencrypt.c:216:37:    expected restricted __le16 [usertype] *<noident>
fs/cifs/smbencrypt.c:216:37:    got unsigned short *<noident>

Signed-off-by: Steve French <smfrench@gmail.com>
Acked-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com

8 years agoCIFS: Add descriptions to the brlock cache functions
Pavel Shilovsky [Mon, 7 Nov 2011 13:11:24 +0000]
CIFS: Add descriptions to the brlock cache functions

Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <sfrench@us.ibm.com>

8 years agomd: raid5 crash during degradation
Adam Kwolek [Fri, 9 Dec 2011 03:26:11 +0000]
md: raid5 crash during degradation

NULL pointer access causes crash in raid5 module.

Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>

8 years agoStaging: comedi: fix initialise statics to 0 or NULL issue in cb_das16_cs.c
Ravishankar karkala Mallikarjunayya [Thu, 8 Dec 2011 12:51:56 +0000]
Staging: comedi: fix initialise statics to 0 or NULL issue in cb_das16_cs.c

This is a patch to the cb_das16_cs.c file that fixes up a initialise
statics to 0 or NULL warning found by the checkpatch.pl tool.

Signed-off-by: Ravishankar Karkala Mallikarjunayya <ravishankar.km@greenturtles.in>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agoStaging: comedi: fix initialise statics to 0 or NULL issue in dt3000.c
Ravishankar karkala Mallikarjunayya [Thu, 8 Dec 2011 12:52:09 +0000]
Staging: comedi: fix initialise statics to 0 or NULL issue in dt3000.c

This is a patch to the dt3000.c file that fixes up a initialise
statics to 0 or NULL warning found by the checkpatch.pl tool.

Signed-off-by: Ravishankar Karkala Mallikarjunayya <ravishankar.km@greenturtles.in>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agoStaging: comedi: fix line over 80 character issue in cb_pcimdda.c
Ravishankar karkala Mallikarjunayya [Thu, 8 Dec 2011 12:52:03 +0000]
Staging: comedi: fix line over 80 character issue in cb_pcimdda.c

This is a patch to the cb_pcimdda.c file that fixes up a
line over 80 character warning found by the checkpatch.pl tool.

Signed-off-by: Ravishankar Karkala Mallikarjunayya <ravishankar.km@greenturtles.in>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agoStaging: comedi: fix brace coding style issue in daqboard2000.c
Ravishankar karkala Mallikarjunayya [Thu, 8 Dec 2011 12:51:57 +0000]
Staging: comedi: fix brace coding style issue in daqboard2000.c

This is a patch to the daqboard2000.c file that fixes up a brace
warning found by the checkpatch.pl tool.

Signed-off-by: Ravishankar Karkala Mallikarjunayya <ravishankar.km@greenturtles.in>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agostaging: comedi: comedi_fops: Removed int overflow check
Florian Schmaus [Thu, 8 Dec 2011 11:12:45 +0000]
staging: comedi: comedi_fops: Removed int overflow check

This became unnecessary with the previous commit.
Improved the readability of the remaining check, by using UINT_MAX.

Signed-off-by: Florian Schmaus <fschmaus@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agostaging: comedi: comedi_fops: Replace deprecated strict_strtoul with kstrtouint
Florian Schmaus [Thu, 8 Dec 2011 11:12:44 +0000]
staging: comedi: comedi_fops: Replace deprecated strict_strtoul with kstrtouint

As reported by checkpatch.pl strict_strtoul should be replaced. It was
replaced with kstrtouint since async->max_bufsize is an unsigned int
anyway.

Signed-off-by: Florian Schmaus <fschmaus@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agoStaging: lttng: remove from the drivers/staging/ tree
Greg Kroah-Hartman [Thu, 8 Dec 2011 23:25:56 +0000]
Staging: lttng: remove from the drivers/staging/ tree

The "proper" way to do this is to work with the existing in-kernel
tracing subsystem and work to get the missing features that are in lttng
into those subsystems.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agostaging: remove intel_sst driver
Greg Kroah-Hartman [Thu, 8 Dec 2011 23:17:40 +0000]
staging: remove intel_sst driver

Intel has asked that this driver now be removed from the tree, and I am
happy to oblige.

Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agostaging: lttng: Update max symbol length to 256
Mathieu Desnoyers [Tue, 6 Dec 2011 01:07:35 +0000]
staging: lttng: Update max symbol length to 256

The user-space tracer, along with the control tools, now support longer
event name strings (up to 256 chars, including \0).

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agostaging: lttng: TODO update: lttng reported to work fine on -rt now
Mathieu Desnoyers [Sat, 3 Dec 2011 18:05:37 +0000]
staging: lttng: TODO update: lttng reported to work fine on -rt now

The patch "lttng: Fix recent modifications to string_from_user
operation" has been confirmed to fix the corrupted trace problem
experienced on -rt kernel by the original bug reporter. Remove the
entry from the LTTng TODO list.

Reported-by: Yannick Brosseau <yannick.brosseau@gmail.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agostaging: lttng: Fix recent modifications to string_from_user operation
Yannick Brosseau [Sat, 3 Dec 2011 02:13:32 +0000]
staging: lttng: Fix recent modifications to string_from_user operation

Include: a fix for a recently introduced change: obviously max_t should
be used instead of min_t here. Also, a likely should apply to the result
of the comparison, not the variable per se.

Signed-off-by: Yannick Brosseau <yannick.brosseau@gmail.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agodrm/omap: add GEM support for tiled/dmm buffers
Rob Clark [Tue, 6 Dec 2011 01:19:22 +0000]
drm/omap: add GEM support for tiled/dmm buffers

TILER/DMM provides two features for omapdrm GEM objects:
1) providing a physically contiguous view to discontiguous memory
   for hw initiators that cannot otherwise support discontiguous
   buffers (DSS scanout, IVAHD video decode/encode, etc)
2) providing untiling for 2d tiled buffers, which are used in some
   cases to provide rotation and reduce memory bandwidth for hw
   initiators that tend to access data in 2d block patterns.

For 2d tiled buffers, there are some additional complications when
it comes to userspace mmap'ings.  For non-tiled buffers, the original
(potentially physically discontiguous) pages are used to back the
mmap.  For tiled buffers, we need to mmap via the tiler/dmm region to
provide an unswizzled view of the buffer.  But (a) the buffer is not
necessarily pinned in TILER all the time (it can be unmapped when
there is no DMA access to the buffer), and (b) when they are they
are pinned, they not necessarily page aligned from the perspective of
the CPU.  And non-page aligned userspace buffer mapping is evil.

To solve this, we reserve one or more small regions in each of the 2d
containers when the driver is loaded to use as a "user-GART" where we
can create a second page-aligned mapping of parts of the buffer being
accessed from userspace.  Page faulting is used to evict and remap
different regions of whichever buffers are being accessed from user-
space.

Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agodrm/omap: DMM/TILER support for OMAP4+ platform
Andy Gross [Tue, 6 Dec 2011 01:19:21 +0000]
drm/omap: DMM/TILER support for OMAP4+ platform

Dynamic Memory Manager (DMM) is a hardware block in the OMAP4+
processor that contains at least one TILER instance.  TILER, or
Tiling and Isometric Lightweight Engine for Rotation, provides
IOMMU capabilities through the use of a physical address translation
table.  The TILER also provides zero cost rotation and mirroring.

The TILER provides both 1D and 2D access by providing different views
or address ranges that can be used to access the physical memory that
has been mapped in through the PAT.  Access to the 1D view results in
linear access to the underlying memory.  Access to the 2D views result
in tiled access to the underlying memory resulted in increased
efficiency.

The TILER address space is managed by a tiler container manager (TCM)
and allocates the address space through the use of the Simple Tiler
Allocation algorithm (SiTA).  The purpose of the algorithm is to keep
fragmentation of the address space as low as possible.

Signed-off-by: Andy Gross <andy.gross@ti.com>
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agostaging: et131x: Revert changes from previous commit
Mark Einon [Tue, 6 Dec 2011 23:23:10 +0000]
staging: et131x: Revert changes from previous commit

In commit 834d0ee317b (uintxy_t removal) not all changes were trival text replacements, some converted u64 -> dma_addr_t.
In some configurations dma_addr_t is a u32, meaning that some bit operations cause build warnings. From Randy Dunlap:

----------------
on i386 (X86_32) builds:

drivers/staging/et131x/et131x.c:2483:8: warning: right shift count >= width of type
drivers/staging/et131x/et131x.c:2531:8: warning: right shift count >= width of type
----------------

Removed these by reverting dma_addr_t back to u64 types, as well as
reverting some other non-trivial changes from the aforementioned commit.

Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Mark Einon <mark.einon@gmail.com>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agoStaging: olpc_dcon.c: obsolete use of strict_stroul
Valentin Rothberg [Mon, 5 Dec 2011 10:02:35 +0000]
Staging: olpc_dcon.c: obsolete use of strict_stroul

As Dan mentioned, dcon_write() will only write u16 values. The
appropriate parts have been changed. As a result of module_param()
not accepting u16 as a valid data type, ushort is used.

Signed-off-by: Valentin Rothberg <valentinrothberg@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agoStaging: olpc_dcon.c: obsolete use of strict_strtoul
Valentin Rothberg [Sun, 4 Dec 2011 11:17:32 +0000]
Staging: olpc_dcon.c: obsolete use of strict_strtoul

As noted by the checkpatch script, strict_strtoul is obsolete. Unsigned
longs are used, so it seems good to take kstrtoul.

Signed-off-by: Valentin Rothberg <valentinrothberg@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agostaging: mei: updating mei driver documentation
Oren Weil [Tue, 6 Dec 2011 21:25:18 +0000]
staging: mei: updating mei driver documentation

The following changes were made in the document:

1. Update URLs to working links
2. remove old information about module parameters
3. Add IOCTL information.
4. cleanups and fix spelling
5. driver changed from character device to misc character device

Signed-off-by: Oren Weil <oren.jer.weil@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agostaging/mei: fix failure for multiple mei clients connection
Natalia Ovsyanikov [Sun, 4 Dec 2011 22:16:54 +0000]
staging/mei: fix failure for multiple mei clients connection

The irq handler processes queued mei clients connect requests, which were
not transferred to the device in ioctl context due to unavailability
of the write buffer.

The handler may transfer the connection request only if there is
no other ongoing  requests for the same mei id.
This condition was implemented inversely which depending on
the write buffer availability lead to seemingly random
failures during connection attempts.

Cc: Oren Weil <oren.jer.weil@intel.com>
Signed-off-by: Natalia Ovsyanikov <natalia.ovsyanikov@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agostaging/mei: Don't check if loop cursor is null
Tomas Winkler [Sun, 4 Dec 2011 14:16:27 +0000]
staging/mei: Don't check if loop cursor is null

list_for_each_entry_safe(pos, next, &head, list)
if (pos) {
....
}

This check isn't needed.  The list cursor in a list_for_each()
loop is always a valid pointer

Cc: Oren Weil <oren.jer.weil@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agostaging: olpc_dcon: ->read_status() API change
Xi Wang [Fri, 2 Dec 2011 21:28:43 +0000]
staging: olpc_dcon: ->read_status() API change

Change ->read_status() by separating the error handling and the
status bits.  This also fixes a signedness bug in dcon_interrupt()
that would break the error handling.

Signed-off-by: Xi Wang <xi.wang@gmail.com>
Acked-by: Andres Salomon <dilinger@queued.net>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agoStaging: zram: Add a missing GFP_KERNEL specifier in zram_init_device()
Jerome Marchand [Wed, 30 Nov 2011 13:16:16 +0000]
Staging: zram: Add a missing GFP_KERNEL specifier in zram_init_device()

The allocation of zram->compress_buffer is misssing a GFP_* specifier.
This is equivalent to GFP_NOWAIT but it is more likely a omission.
Since the allocation just above it uses GFP_KERNEL, there is no reason
to use GFP_NOWAIT here. Therefore, add GFP_KERNEL.

Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agoStaging: zram/zram_sysfs.c: Fixed call of obsolete function strict_strtoX
Sergey Datsevich [Wed, 7 Dec 2011 18:06:37 +0000]
Staging: zram/zram_sysfs.c: Fixed call of obsolete function strict_strtoX

As reported by checkpatch.pl strict_strtoX is obsolet and should be
replaced by kstrtoX.

Signed-off-by: Sergey Datsevich <srgdts@gmail.com>
Signed-off-by: Bjoern Meier <bjoernmeier@hotmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agoStaging: hv: storvsc: Fix a bug in create_bounce_buffer()
K. Y. Srinivasan [Wed, 7 Dec 2011 15:15:52 +0000]
Staging: hv: storvsc: Fix a bug in create_bounce_buffer()

Set the length field of the scatter gather elements correctly when we create
the bounce buffer. When we use the bounce buffer for a "write" operation,
the act of copying to the bounce buffer, correctly deals with this issue.
However, on the "read" side, the current code was not correctly setting
the buffer length. Fix this bug. Note that when we copy from the bounce
buffer (for the read case), the amount we copy is controlled by the original
scatter gather list given to the driver.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reported-by: Dadok Milan <dadok@kvados.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agoMerge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Thu, 8 Dec 2011 21:21:28 +0000]
Merge branch 'timers-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  alarmtimers: Fix time comparison
  ptp: Fix clock_getres() implementation

8 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux...
Linus Torvalds [Thu, 8 Dec 2011 21:18:59 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/mason/linux-btrfs

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: drop spin lock when memory alloc fails
  Btrfs: check if the to-be-added device is writable
  Btrfs: try cluster but don't advance in search list
  Btrfs: try to allocate from cluster even at LOOP_NO_EMPTY_SIZE

8 years agoMerge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Linus Torvalds [Thu, 8 Dec 2011 21:18:38 +0000]
Merge branch 'fixes' of git://git./linux/kernel/git/arm/arm-soc

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (28 commits)
  ARM: sa1100: fix build error
  ARM: OMAP1: recalculate loops per jiffy after dpll1 reprogram
  ARM: davinci: dm365 evm: align nand partition table to u-boot
  ARM: davinci: da850 evm: change audio edma event queue to EVENTQ_0
  ARM: davinci: dm646x evm: wrong register used in setup_vpif_input_channel_mode
  ARM: davinci: dm646x does not have a DSP domain
  ARM: davinci: psc: fix incorrect offsets
  ARM: davinci: psc: fix incorrect mask
  ARM: mx28: LRADC macro rename
  arm: mx23: recognise stmp378x as mx23
  ARM: mxs: fix machines' initializers order
  ARM: mxs/tx28: add __initconst for fec pdata
  ARM: S3C64XX: Staticise s3c6400_sysclass
  ARM: S3C64XX: Add linux/export.h to dev-spi.c
  ARM: S3C64XX: Remove extern from definition of framebuffer setup call
  MAINTAINERS: Extend Samsung patterns to cover SPI and ASoC drivers
  MAINTAINERS: Add linux-samsung-soc mailing list for Samsung
  MAINTAINERS: Consolidate Samsung MAINTAINERS
  ARM: CSR: PM: fix build error due to undeclared 'THIS_MODULE'
  ARM: CSR: fix build error due to new mdesc->dma_zone_size
  ...

8 years agoTOMOYO: Fix pathname handling of disconnected paths.
Tetsuo Handa [Thu, 8 Dec 2011 12:24:06 +0000]
TOMOYO: Fix pathname handling of disconnected paths.

Current tomoyo_realpath_from_path() implementation returns strange pathname
when calculating pathname of a file which belongs to lazy unmounted tree.
Use local pathname rather than strange absolute pathname in that case.

Also, this patch fixes a regression by commit 02125a82 "fix apparmor
dereferencing potentially freed dentry, sanitize __d_path() API".

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agox86, hpet: Immediately disable HPET timer 1 if rtc irq is masked
Mark Langsdorf [Fri, 18 Nov 2011 15:33:06 +0000]
x86, hpet: Immediately disable HPET timer 1 if rtc irq is masked

When HPET is operating in RTC mode, the TN_ENABLE bit on timer1
controls whether the HPET or the RTC delivers interrupts to irq8. When
the system goes into suspend, the RTC driver sends a signal to the
HPET driver so that the HPET releases control of irq8, allowing the
RTC to wake the system from suspend. The switchover is accomplished by
a write to the HPET configuration registers which currently only
occurs while servicing the HPET interrupt.

On some systems, I have seen the system suspend before an HPET
interrupt occurs, preventing the write to the HPET configuration
register and leaving the HPET in control of the irq8. As the HPET is
not active during suspend, it does not generate a wake signal and RTC
alarms do not work.

This patch forces the HPET driver to immediately transfer control of
the irq8 channel to the RTC instead of waiting until the next
interrupt event.

Signed-off-by: Mark Langsdorf <mark.langsdorf@amd.com>
Link: http://lkml.kernel.org/r/20111118153306.GB16319@alberich.amd.com
Tested-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org

8 years agostaging: bcm: led_control.c: breaking of long lines
Johannes Tenschert [Wed, 7 Dec 2011 17:25:10 +0000]
staging: bcm: led_control.c: breaking of long lines

Signed-off-by: Johannes Tenschert <Johannes.Tenschert@informatik.stud.uni-erlangen.de>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agostaging: bcm: led_control.c: fix parens/braces
Johannes Tenschert [Wed, 7 Dec 2011 17:25:09 +0000]
staging: bcm: led_control.c: fix parens/braces

Signed-off-by: Johannes Tenschert <Johannes.Tenschert@informatik.stud.uni-erlangen.de>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agostaging: bcm: led_control.c: fix comments
Johannes Tenschert [Wed, 7 Dec 2011 17:25:08 +0000]
staging: bcm: led_control.c: fix comments

Signed-off-by: Johannes Tenschert <Johannes.Tenschert@informatik.stud.uni-erlangen.de>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agostaging: bcm: led_control.c: fix indentation
Johannes Tenschert [Wed, 7 Dec 2011 17:25:07 +0000]
staging: bcm: led_control.c: fix indentation

Signed-off-by: Johannes Tenschert <Johannes.Tenschert@informatik.stud.uni-erlangen.de>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agostaging: bcm: led_control.c: fix whitespaces
Johannes Tenschert [Wed, 7 Dec 2011 17:25:06 +0000]
staging: bcm: led_control.c: fix whitespaces

Signed-off-by: Johannes Tenschert <Johannes.Tenschert@informatik.stud.uni-erlangen.de>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agoStaging: bcm: Alter return value for copy_to/from_user() to "return -EFAULT" when...
Kevin McKinney [Tue, 6 Dec 2011 03:17:03 +0000]
Staging: bcm: Alter return value for copy_to/from_user() to "return -EFAULT" when an error occurs.

In this clean up patch, I altered functions: copy_to/
from_user() to return -EFAULT when an error occurs.
I also replaced break statements when an error occurs
from copy_to/from_user() with direct returns of -EFAULT.

Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agoStaging: bcm: Alter code to move error handling closer to the calls; and remove white...
Kevin McKinney [Fri, 2 Dec 2011 03:02:16 +0000]
Staging: bcm: Alter code to move error handling closer to the calls; and remove white space, IOCTL_BCM_NVM_WRITE.

This is a clean up patch for IOCTL_BCM_NVM_WRITE
that replaces the assignment of the Status
variable with direct returns of the error code,
replaces the break statements with direct returns,
and removes a white space.

Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agoStaging: bcm: Fix double free of 'pReadData' in IOCTL_BCM_NVM_WRITE.
Kevin McKinney [Fri, 2 Dec 2011 03:02:15 +0000]
Staging: bcm: Fix double free of 'pReadData' in IOCTL_BCM_NVM_WRITE.

This patch fixes a memory error in ioctl,
IOCTL_BCM_NVM_WRITE. While copying data to
user space, if an error occurs, pReadData
is freed. Then, at the end of the ioctl,
pReadData was being freed again.

Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agostaging/line6: refactor device information and add POD HD 500
Markus Grabner [Mon, 5 Dec 2011 22:51:53 +0000]
staging/line6: refactor device information and add POD HD 500

This patch refactors the device information code and adds preliminary support for the POD HD 500 device.

Signed-off-by: Markus Grabner <grabner@icg.tugraz.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agostaging/line6: Remove obsolete code
Markus Grabner [Mon, 5 Dec 2011 22:51:52 +0000]
staging/line6: Remove obsolete code

This patch removes experimental code which is no longer used.

Signed-off-by: Markus Grabner <grabner@icg.tugraz.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agoStaging: line6/midi.c: Fixed call of obsolete function strict_strtoul
Andor Daam [Mon, 5 Dec 2011 09:10:37 +0000]
Staging: line6/midi.c: Fixed call of obsolete function strict_strtoul

The obsolete function strict_strtoul should be replaced by the kstrto*
functions.

In this context kstrtou16 should be use, as midi_mask_receive is only
used as unsigned short. All corresponding datatypes were adapted
accordingly.

Signed-off-by: Andor Daam <andor.daam@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agoStaging: line6/midi.c: Fixed call of obsolete function strict_strtoul
Andor Daam [Mon, 5 Dec 2011 09:09:25 +0000]
Staging: line6/midi.c: Fixed call of obsolete function strict_strtoul

The function strict_strtoul is obsolete and should be replaced by the
new kstrto* functions.

The variable midi_mask_transmit is only used as unsigned short and the
datatypes of all affected variables were adjusted accordingly.

Signed-off-by: Andor Daam <andor.daam@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agoStaging: comedi: unlock on error in usbduxsigma_attach()
Dan Carpenter [Wed, 30 Nov 2011 08:42:58 +0000]
Staging: comedi: unlock on error in usbduxsigma_attach()

We should release the udev->sem lock before returning.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agoStaging: comedi: unlock on error in usbdux_ao_inttrig()
Dan Carpenter [Wed, 30 Nov 2011 08:42:21 +0000]
Staging: comedi: unlock on error in usbdux_ao_inttrig()

If we had an invalid trignum (anything other than zero is invalid) then
we returned without unlocking.  I've modified this function to just have
one return point.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agostaging: xgifb: enable forcecrt2type as a module parameter
Aaro Koskinen [Mon, 5 Dec 2011 22:10:49 +0000]
staging: xgifb: enable forcecrt2type as a module parameter

Enable forcecrt2type as a module parameter.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agostaging: xgifb: enable forcecrt2type on XG21
Aaro Koskinen [Mon, 5 Dec 2011 22:10:48 +0000]
staging: xgifb: enable forcecrt2type on XG21

Make "forcecrt2type" to apply also for XG21. The patch enables user to
switch LVDS LCD ON/OFF without the need to update the video BIOS.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agostaging: xgifb: delete "userom" option
Aaro Koskinen [Mon, 5 Dec 2011 22:10:47 +0000]
staging: xgifb: delete "userom" option

Delete a redundant option.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agostaging: xgifb: vb_table: delete XGI21_LCDCapList
Aaro Koskinen [Mon, 5 Dec 2011 22:10:46 +0000]
staging: xgifb: vb_table: delete XGI21_LCDCapList

Delete XGI21_LCDCapList. This data is display specific and does not
belong to the driver. It should be provided by the video BIOS.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agostaging: xgifb: move XGI21_LVDSCapStruct into xgifb_video_info
Aaro Koskinen [Mon, 5 Dec 2011 22:10:45 +0000]
staging: xgifb: move XGI21_LVDSCapStruct into xgifb_video_info

Move the LVDS data into a device-specific data, and eliminate the global
variable usage.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agostaging: xgifb: disable LVDS on XG27
Aaro Koskinen [Mon, 5 Dec 2011 22:10:44 +0000]
staging: xgifb: disable LVDS on XG27

XG27 has the second display output already hardcoded to disabled. Just
in case, ensure that it has the LVDS code paths disabled. This will
simplify the future cleanups.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agostaging: xgifb: delete XGIfb_GetXG21LVDSData()
Aaro Koskinen [Mon, 5 Dec 2011 22:10:43 +0000]
staging: xgifb: delete XGIfb_GetXG21LVDSData()

Delete XGIfb_GetXG21LVDSData() and code which duplicates
xgifb_read_vbios().

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>