7 years agosparc/PCI: remove unused pcibios_assign_resource() definition
Bjorn Helgaas [Fri, 15 Jun 2012 22:38:23 +0000]
sparc/PCI: remove unused pcibios_assign_resource() definition

pcibios_assign_resource() isn't used anywhere; remove it.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

7 years agoLinux 3.5-rc2
Linus Torvalds [Sat, 9 Jun 2012 01:40:09 +0000]
Linux 3.5-rc2

7 years agomm, oom: fix badness score underflow
David Rientjes [Fri, 8 Jun 2012 20:21:26 +0000]
mm, oom: fix badness score underflow

If the privileges given to root threads (3% of allowable memory) or a
negative value of /proc/pid/oom_score_adj happen to exceed the amount of
rss of a thread, its badness score overflows as a result of commit
a7f638f999ff ("mm, oom: normalize oom scores to oom_score_adj scale only
for userspace").

Fix this by making the type signed and return 1, meaning the thread is
still eligible for kill, if the value is negative.

Reported-by: Dave Jones <davej@redhat.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoMerge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 8 Jun 2012 21:59:29 +0000]
Merge branch 'sched-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull scheduler fixes from Ingo Molnar.

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched: Fix the relax_domain_level boot parameter
  sched: Validate assumptions in sched_init_numa()
  sched: Always initialize cpu-power
  sched: Fix domain iteration
  sched/rt: Fix lockdep annotation within find_lock_lowest_rq()
  sched/numa: Load balance between remote nodes
  sched/x86: Calculate booted cores after construction of sibling_mask

7 years agosched/fair: fix lots of kernel-doc warnings
Randy Dunlap [Fri, 8 Jun 2012 20:18:33 +0000]
sched/fair: fix lots of kernel-doc warnings

Fix lots of new kernel-doc warnings in kernel/sched/fair.c:

  Warning(kernel/sched/fair.c:3625): No description found for parameter 'env'
  Warning(kernel/sched/fair.c:3625): Excess function parameter 'sd' description in 'update_sg_lb_stats'
  Warning(kernel/sched/fair.c:3735): No description found for parameter 'env'
  Warning(kernel/sched/fair.c:3735): Excess function parameter 'sd' description in 'update_sd_pick_busiest'
  Warning(kernel/sched/fair.c:3735): Excess function parameter 'this_cpu' description in 'update_sd_pick_busiest'
  .. more warnings

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoRevert "drm/i915/crt: Do not rely upon the HPD presence pin"
Linus Torvalds [Fri, 8 Jun 2012 21:53:06 +0000]
Revert "drm/i915/crt: Do not rely upon the HPD presence pin"

This reverts commit 9e612a008fa7fe493a473454def56aa321479495.

It incorrectly finds VGA connectors where none are attached, apparently
not noticing that nothing replied to the EDID queries, and happily using
the default EDID modes that have nothing to do with actual hardware.

That in turn then causes X to fall down to the lowest common
denominator, which is usually the default 1024x768 mode that is in the
default EDID and pretty much anything supports).

I'd suggest that if not relying on the HDP pin, the code should at least
check whether it gets valid EDID data back, rather than just assume
there's something on the VGA connector.

Cc: Dave Airlie <airlied@linux.ie>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoMerge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso...
Linus Torvalds [Fri, 8 Jun 2012 18:15:31 +0000]
Merge tag 'ext4_for_linus' of git://git./linux/kernel/git/tytso/ext4

Pull ext4 bug fixes from Theodore Ts'o:
 "This update contains two bug fixes, both destined for the stable tree.
  Perhaps the most important is one which fixes ext4 when used with file
  systems originally formatted for use with ext3, but then later
  converted to take advantage of ext4."

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: don't set i_flags in EXT4_IOC_SETFLAGS
  ext4: fix the free blocks calculation for ext3 file systems w/ uninit_bg

7 years agoMerge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
Linus Torvalds [Fri, 8 Jun 2012 18:06:01 +0000]
Merge branch 'merge' of git://git./linux/kernel/git/paulus/powerpc

Pull powerpc fixes from Paul Mackerras:
 "Two small fixes for powerpc:
   - a fix for a regression since 3.2 that causes 4-second (or longer)
     pauses
   - a fix for a potential oops when loading kernel modules on 32-bit
     embedded systems."

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  powerpc: Fix kernel panic during kernel module load
  powerpc/time: Sanity check of decrementer expiration is necessary

7 years agoMerge tag 'upstream-3.5-rc2' of git://git.infradead.org/linux-ubifs
Linus Torvalds [Fri, 8 Jun 2012 18:04:06 +0000]
Merge tag 'upstream-3.5-rc2' of git://git.infradead.org/linux-ubifs

Pull UBI/UBIFS fixes from Artem Bityutskiy:
 "Fix UBI and UBIFS - they refuse to work without debugfs.  This was
  broken by the 3.5-rc1 UBI/UBIFS changes when we removed the debugging
  Kconfig switches.

  Also, correct locking in 'ubi_wl_flush()' - it was extended to support
  flushing a specific LEB in 3.5-rc1, and the locking was sub-optimal."

* tag 'upstream-3.5-rc2' of git://git.infradead.org/linux-ubifs:
  UBI: correct ubi_wl_flush locking
  UBIFS: fix debugfs-less systems support
  UBI: fix debugfs-less systems support

7 years agoRevert "vfs: stop d_splice_alias creating directory aliases"
Linus Torvalds [Fri, 8 Jun 2012 17:34:03 +0000]
Revert "vfs: stop d_splice_alias creating directory aliases"

This reverts commit 7732a557b1342c6e6966efb5f07effcf99f56167 (and commit
3f50fff4dace23d3cfeb195d5cd4ee813cee68b7, which was a follow-up
cleanup).

We're chasing an elusive bug that Dave Jones can apparently reproduce
using his system call fuzzer tool, and that looks like some kind of
locking ordering problem on the directory i_mutex chain.  Our i_mutex
locking is rather complex, and depends on the topological ordering of
the directories, which is why we have been very wary of splicing
directory entries around.

Of course, we really don't want to ever see aliased unconnected
directories anyway, so none of this should ever happen, but this revert
aims to basically get us back to a known older state.

Bruce points to some of the previous discussion at

       http://marc.info/?i=<20110310105821.GE22723@ZenIV.linux.org.uk>

and in particular a long post from Neil:

       http://marc.info/?i=<20110311150749.2fa2be66@notabene.brown>

It should be noted that it's possible that Dave's problems come from
other changes altohgether, including possibly just the fact that Dave
constantly is teachning his fuzzer new tricks.  So what appears to be a
new bug could in fact be an old one that just gets newly triggered, but
reverting these patches as "still under heavy discussion" is the right
thing regardless.

Requested-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoMerge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 8 Jun 2012 16:26:55 +0000]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Ingo Molnar.

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/nmi: Fix section mismatch warnings on 32-bit
  x86/uv: Fix UV2 BAU legacy mode
  x86/mm: Only add extra pages count for the first memory range during pre-allocation early page table space
  x86, efi stub: Add .reloc section back into image
  x86/ioapic: Fix NULL pointer dereference on CPU hotplug after disabling irqs
  x86/reboot: Fix a warning message triggered by stop_other_cpus()
  x86/intel/moorestown: Change intel_scu_devices_create() to __devinit
  x86/numa: Set numa_nodes_parsed at acpi_numa_memory_affinity_init()
  x86/gart: Fix kmemleak warning
  x86: mce: Add the dropped timer interval init back
  x86/mce: Fix the MCE poll timer logic

7 years agoMerge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 8 Jun 2012 16:14:46 +0000]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull perf fixes from Ingo Molnar:
 "A bit larger than what I'd wish for - half of it is due to hw driver
  updates to Intel Ivy-Bridge which info got recently released,
  cycles:pp should work there now too, amongst other things.  (but we
  are generally making exceptions for hardware enablement of this type.)

  There are also callchain fixes in it - responding to mostly
  theoretical (but valid) concerns.  The tooling side sports perf.data
  endianness/portability fixes which did not make it for the merge
  window - and various other fixes as well."

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (26 commits)
  perf/x86: Check user address explicitly in copy_from_user_nmi()
  perf/x86: Check if user fp is valid
  perf: Limit callchains to 127
  perf/x86: Allow multiple stacks
  perf/x86: Update SNB PEBS constraints
  perf/x86: Enable/Add IvyBridge hardware support
  perf/x86: Implement cycles:p for SNB/IVB
  perf/x86: Fix Intel shared extra MSR allocation
  x86/decoder: Fix bsr/bsf/jmpe decoding with operand-size prefix
  perf: Remove duplicate invocation on perf_event_for_each
  perf uprobes: Remove unnecessary check before strlist__delete
  perf symbols: Check for valid dso before creating map
  perf evsel: Fix 32 bit values endianity swap for sample_id_all header
  perf session: Handle endianity swap on sample_id_all header data
  perf symbols: Handle different endians properly during symbol load
  perf evlist: Pass third argument to ioctl explicitly
  perf tools: Update ioctl documentation for PERF_IOC_FLAG_GROUP
  perf tools: Make --version show kernel version instead of pull req tag
  perf tools: Check if callchain is corrupted
  perf callchain: Make callchain cursors TLS
  ...

7 years agoMerge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Linus Torvalds [Fri, 8 Jun 2012 16:12:21 +0000]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux

Pull drm intel and exynos fixes from Dave Airlie:
 "A bunch of fixes for Intel and exynos, nothing too major, a new intel
  PCI ID, and a fix for CRT detection."

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/i915: pch_irq_handler -> {ibx, cpt}_irq_handler
  char/agp: add another Ironlake host bridge
  drm/i915: fix up ivb plane 3 pageflips
  drm/exynos: fixed blending for hdmi graphic layer
  drm/exynos: Remove dummy encoder get_crtc operation implementation
  drm/exynos: Keep a reference to frame buffer GEM objects
  drm/exynos: Don't cast GEM object to Exynos GEM object when not needed
  drm/exynos: DRIVER_BUS_PLATFORM is not a driver feature
  drm/exynos: fixed size type.
  drm/exynos: Use DRM_FORMAT_{NV12, YUV420} instead of DRM_FORMAT_{NV12M, YUV420M}
  drm/i915: hold forcewake around ring hw init
  drm/i915: Mark the ringbuffers as being in the GTT domain
  drm/i915/crt: Do not rely upon the HPD presence pin
  drm/i915: Reset last_retired_head when resetting ring

7 years agoMerge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 8 Jun 2012 16:11:33 +0000]
Merge branch 'timers-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull leap second timer fix from Thomas Gleixner.

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  timekeeping: Fix CLOCK_MONOTONIC inconsistency during leapsecond

7 years agoMerge tag 'moduleparam-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Fri, 8 Jun 2012 16:10:35 +0000]
Merge tag 'moduleparam-for-linus' of git://git./linux/kernel/git/rusty/linux-2.6-for-linus

Pull minor module param fixes from Rusty Russell:
 "One bugfix for multiple moduleparam levels, one removal of overzealous
  printk."

* tag 'moduleparam-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  init: Drop initcall level output
  module_param: stop double-calling parameters.

7 years agox86/nmi: Fix section mismatch warnings on 32-bit
Don Zickus [Wed, 6 Jun 2012 14:05:42 +0000]
x86/nmi: Fix section mismatch warnings on 32-bit

It was reported that compiling for 32-bit caused a bunch of
section mismatch warnings:

 VDSOSYM arch/x86/vdso/vdso32-syms.lds
  LD      arch/x86/vdso/built-in.o
  LD      arch/x86/built-in.o

 WARNING: arch/x86/built-in.o(.data+0x5af0): Section mismatch in
 reference from the variable test_nmi_ipi_callback_na.10451 to
 the function .init.text:test_nmi_ipi_callback() [...]

 WARNING: arch/x86/built-in.o(.data+0x5b04): Section mismatch in
 reference from the variable nmi_unk_cb_na.10399 to the function
 .init.text:nmi_unk_cb() The variable nmi_unk_cb_na.10399
 references the function __init nmi_unk_cb() [...]

Both of these are attributed to the internal representation of
the nmiaction struct created during register_nmi_handler.  The
reason for this is that those structs are not defined in the
init section whereas the rest of the code in nmi_selftest.c is.

To resolve this, I created a new #define,
register_nmi_handler_initonly, that tags the struct as
__initdata to resolve the mismatch.  This #define should only be
used in rare situations where the register/unregister is called
during init of the kernel.

Big thanks to Jan Beulich for decoding this for me as I didn't
have a clue what was going on.

Reported-by: Witold Baryluk <baryluk@smp.if.uj.edu.pl>
Tested-by: Witold Baryluk <baryluk@smp.if.uj.edu.pl>
Cc: Jan Beulich <JBeulich@suse.com>
Signed-off-by: Don Zickus <dzickus@redhat.com>
Link: http://lkml.kernel.org/r/1338991542-23000-1-git-send-email-dzickus@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

7 years agopowerpc: Fix kernel panic during kernel module load
Steffen Rumler [Wed, 6 Jun 2012 14:37:17 +0000]
powerpc: Fix kernel panic during kernel module load

This fixes a problem which can causes kernel oopses while loading
a kernel module.

According to the PowerPC EABI specification, GPR r11 is assigned
the dedicated function to point to the previous stack frame.
In the powerpc-specific kernel module loader, do_plt_call()
(in arch/powerpc/kernel/module_32.c), GPR r11 is also used
to generate trampoline code.

This combination crashes the kernel, in the case where the compiler
chooses to use a helper function for saving GPRs on entry, and the
module loader has placed the .init.text section far away from the
.text section, meaning that it has to generate a trampoline for
functions in the .init.text section to call the GPR save helper.
Because the trampoline trashes r11, references to the stack frame
using r11 can cause an oops.

The fix just uses GPR r12 instead of GPR r11 for generating the
trampoline code.  According to the statements from Freescale, this is
safe from an EABI perspective.

I've tested the fix for kernel 2.6.33 on MPC8541.

Cc: stable@vger.kernel.org
Signed-off-by: Steffen Rumler <steffen.rumler.ext@nsn.com>
[paulus@samba.org: reworded the description]
Signed-off-by: Paul Mackerras <paulus@samba.org>

7 years agox86/uv: Fix UV2 BAU legacy mode
Cliff Wickman [Thu, 7 Jun 2012 13:31:40 +0000]
x86/uv: Fix UV2 BAU legacy mode

The SGI Altix UV2 BAU (Broadcast Assist Unit) as used for
tlb-shootdown (selective broadcast mode) always uses UV2
broadcast descriptor format. There is no need to clear the
'legacy' (UV1) mode, because the hardware always uses UV2 mode
for selective broadcast.

But the BIOS uses general broadcast and legacy mode, and the
hardware pays attention to the legacy mode bit for general
broadcast. So the kernel must not clear that mode bit.

Signed-off-by: Cliff Wickman <cpw@sgi.com>
Cc: <stable@kernel.org>
Link: http://lkml.kernel.org/r/E1SccoO-0002Lh-Cb@eag09.americas.sgi.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

7 years agox86/mm: Only add extra pages count for the first memory range during pre-allocation...
Yinghai Lu [Wed, 6 Jun 2012 17:55:40 +0000]
x86/mm: Only add extra pages count for the first memory range during pre-allocation early page table space

Robin found this regression:

| I just tried to boot an 8TB system.  It fails very early in boot with:
| Kernel panic - not syncing: Cannot find space for the kernel page tables

git bisect commit 722bc6b16771ed80871e1fd81c86d3627dda2ac8.

A git revert of that commit does boot past that point on the 8TB
configuration.

That commit will add up extra pages for all memory range even
above 4g.

Try to limit that extra page count adding to first entry only.

Bisected-by: Robin Holt <holt@sgi.com>
Tested-by: Robin Holt <holt@sgi.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: WANG Cong <xiyou.wangcong@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/CAE9FiQUj3wyzQxtq9yzBNc9u220p8JZ1FYHG7t%3DMOzJ%3D9BZMYA@mail.gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

7 years agoMerge branch 'exynos-drm-fixes' of git://git.infradead.org/users/kmpark/linux-samsung...
Dave Airlie [Fri, 8 Jun 2012 08:42:51 +0000]
Merge branch 'exynos-drm-fixes' of git://git.infradead.org/users/kmpark/linux-samsung into drm-fixes

* 'exynos-drm-fixes' of git://git.infradead.org/users/kmpark/linux-samsung:
  drm/exynos: fixed blending for hdmi graphic layer
  drm/exynos: Remove dummy encoder get_crtc operation implementation
  drm/exynos: Keep a reference to frame buffer GEM objects
  drm/exynos: Don't cast GEM object to Exynos GEM object when not needed
  drm/exynos: DRIVER_BUS_PLATFORM is not a driver feature
  drm/exynos: fixed size type.
  drm/exynos: Use DRM_FORMAT_{NV12, YUV420} instead of DRM_FORMAT_{NV12M, YUV420M}

7 years agoMerge branch 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel...
Dave Airlie [Fri, 8 Jun 2012 08:42:35 +0000]
Merge branch 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel into drm-fixes

* 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel:
  drm/i915: pch_irq_handler -> {ibx, cpt}_irq_handler
  char/agp: add another Ironlake host bridge
  drm/i915: fix up ivb plane 3 pageflips
  drm/i915: hold forcewake around ring hw init
  drm/i915: Mark the ringbuffers as being in the GTT domain
  drm/i915/crt: Do not rely upon the HPD presence pin
  drm/i915: Reset last_retired_head when resetting ring

7 years agoinit: Drop initcall level output
Borislav Petkov [Fri, 1 Jun 2012 16:56:00 +0000]
init: Drop initcall level output

9fb48c744ba6a ("params: add 3rd arg to option handler callback
signature") added similar lines to dmesg:

initlevel:0=early, 4 registered initcalls
initlevel:1=core, 31 registered initcalls
initlevel:2=postcore, 11 registered initcalls
initlevel:3=arch, 7 registered initcalls
initlevel:4=subsys, 40 registered initcalls
initlevel:5=fs, 30 registered initcalls
initlevel:6=device, 250 registered initcalls
initlevel:7=late, 35 registered initcalls

but they don't contain any info for the general user staring at dmesg.
I'm very doubtful the count of initcalls registered per level helps
anyone so drop that output completely.

Cc: Jim Cromie <jim.cromie@gmail.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jason Baron <jbaron@redhat.com>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

7 years agomodule_param: stop double-calling parameters.
Rusty Russell [Fri, 8 Jun 2012 05:28:13 +0000]
module_param: stop double-calling parameters.

Commit 026cee0086fe1df4cf74691cf273062cc769617d "params:
<level>_initcall-like kernel parameters" set old-style module
parameters to level 0.  And we call those level 0 calls where we used
to, early in start_kernel().

We also loop through the initcall levels and call the levelled
module_params before the corresponding initcall.  Unfortunately level
0 is early_init(), so we call the standard module_param calls twice.

(Turns out most things don't care, but at least ubi.mtd does).

Change the level to -1 for standard module_param calls.

Reported-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: stable@kernel.org

7 years agopowerpc/time: Sanity check of decrementer expiration is necessary
Paul Mackerras [Fri, 1 Jun 2012 08:13:43 +0000]
powerpc/time: Sanity check of decrementer expiration is necessary

This reverts 68568add2c ("powerpc/time: Remove unnecessary sanity check
of decrementer expiration").  We do need to check whether we have reached
the expiration time of the next event, because we sometimes get an early
decrementer interrupt, most notably when we set the decrementer to 1 in
arch_irq_work_raise().  The effect of not having the sanity check is that
if timer_interrupt() gets called early, we leave the decrementer set to
its maximum value, which means we then don't get any more decrementer
interrupts for about 4 seconds (or longer, depending on timebase
frequency).  I saw these pauses as a consequence of getting a stray
hypervisor decrementer interrupt left over from exiting a KVM guest.

This isn't quite a straight revert because of changes to the surrounding
code, but it restores the same algorithm as was previously used.

Cc: stable@vger.kernel.org
Acked-by: Anton Blanchard <anton@samba.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

7 years agoRevert "mm: correctly synchronize rss-counters at exit/exec"
Linus Torvalds [Fri, 8 Jun 2012 00:54:07 +0000]
Revert "mm: correctly synchronize rss-counters at exit/exec"

This reverts commit 40af1bbdca47e5c8a2044039bb78ca8fd8b20f94.

It's horribly and utterly broken for at least the following reasons:

 - calling sync_mm_rss() from mmput() is fundamentally wrong, because
   there's absolutely no reason to believe that the task that does the
   mmput() always does it on its own VM.  Example: fork, ptrace, /proc -
   you name it.

 - calling it *after* having done mmdrop() on it is doubly insane, since
   the mm struct may well be gone now.

 - testing mm against NULL before you call it is insane too, since a
NULL mm there would have caused oopses long before.

.. and those are just the three bugs I found before I decided to give up
looking for me and revert it asap.  I should have caught it before I
even took it, but I trusted Andrew too much.

Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoext4: don't set i_flags in EXT4_IOC_SETFLAGS
Tao Ma [Thu, 7 Jun 2012 23:04:19 +0000]
ext4: don't set i_flags in EXT4_IOC_SETFLAGS

Commit 7990696 uses the ext4_{set,clear}_inode_flags() functions to
change the i_flags automatically but fails to remove the error setting
of i_flags.  So we still have the problem of trashing state flags.
Fix this by removing the assignment.

Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org

7 years agoext4: fix the free blocks calculation for ext3 file systems w/ uninit_bg
Theodore Ts'o [Thu, 7 Jun 2012 22:56:06 +0000]
ext4: fix the free blocks calculation for ext3 file systems w/ uninit_bg

Ext3 filesystems that are converted to use as many ext4 file system
features as possible will enable uninit_bg to speed up e2fsck times.
These file systems will have a native ext3 layout of inode tables and
block allocation bitmaps (as opposed to ext4's flex_bg layout).
Unfortunately, in these cases, when first allocating a block in an
uninitialized block group, ext4 would incorrectly calculate the number
of free blocks in that block group, and then errorneously report that
the file system was corrupt:

EXT4-fs error (device vdd): ext4_mb_generate_buddy:741: group 30, 32254 clusters in bitmap, 32258 in gd

This problem can be reproduced via:

    mke2fs -q -t ext4 -O ^flex_bg /dev/vdd 5g
    mount -t ext4 /dev/vdd /mnt
    fallocate -l 4600m /mnt/test

The problem was caused by a bone headed mistake in the check to see if a
particular metadata block was part of the block group.

Many thanks to Kees Cook for finding and bisecting the buggy commit
which introduced this bug (commit fd034a84e1, present since v3.2).

Reported-by: Sander Eikelenboom <linux@eikelenboom.it>
Reported-by: Kees Cook <keescook@chromium.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Tested-by: Kees Cook <keescook@chromium.org>
Cc: stable@kernel.org

7 years agoMerge branch 'akpm' (Andrew's fixups)
Linus Torvalds [Thu, 7 Jun 2012 22:05:43 +0000]
Merge branch 'akpm' (Andrew's fixups)

Merge random fixes from Andrew Morton.

* emailed from Andrew Morton <akpm@linux-foundation.org>: (11 patches)
  mm: correctly synchronize rss-counters at exit/exec
  btree: catch NULL value before it does harm
  btree: fix tree corruption in btree_get_prev()
  ipc: shm: restore MADV_REMOVE functionality on shared memory segments
  drivers/platform/x86/acerhdf.c: correct Boris' mail address
  c/r: prctl: drop VMA flags test on PR_SET_MM_ stack data assignment
  c/r: prctl: add ability to get clear_tid_address
  c/r: prctl: add minimal address test to PR_SET_MM
  c/r: prctl: update prctl_set_mm_exe_file() after mm->num_exe_file_vmas removal
  MAINTAINERS: whitespace fixes
  shmem: replace_page must flush_dcache and others

7 years agomm: correctly synchronize rss-counters at exit/exec
Konstantin Khlebnikov [Thu, 7 Jun 2012 21:21:14 +0000]
mm: correctly synchronize rss-counters at exit/exec

mm->rss_stat counters have per-task delta: task->rss_stat.  Before
changing task->mm pointer the kernel must flush this delta with
sync_mm_rss().

do_exit() already calls sync_mm_rss() to flush the rss-counters before
committing the rss statistics into task->signal->maxrss, taskstats,
audit and other stuff.  Unfortunately the kernel does this before
calling mm_release(), which can call put_user() for processing
task->clear_child_tid.  So at this point we can trigger page-faults and
task->rss_stat becomes non-zero again.  As a result mm->rss_stat becomes
inconsistent and check_mm() will print something like this:

| BUG: Bad rss-counter state mm:ffff88020813c380 idx:1 val:-1
| BUG: Bad rss-counter state mm:ffff88020813c380 idx:2 val:1

This patch moves sync_mm_rss() into mm_release(), and moves mm_release()
out of do_exit() and calls it earlier.  After mm_release() there should
be no pagefaults.

[akpm@linux-foundation.org: tweak comment]
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: <stable@vger.kernel.org> [3.4.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agobtree: catch NULL value before it does harm
Joern Engel [Thu, 7 Jun 2012 21:21:14 +0000]
btree: catch NULL value before it does harm

Storing NULL values in the btree is illegal and can lead to memory
corruption and possible other fun as well.  Catch it on insert, instead
of waiting for the inevitable.

Signed-off-by: Joern Engel <joern@logfs.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agobtree: fix tree corruption in btree_get_prev()
Roland Dreier [Thu, 7 Jun 2012 21:21:13 +0000]
btree: fix tree corruption in btree_get_prev()

The memory the parameter __key points to is used as an iterator in
btree_get_prev(), so if we save off a bkey() pointer in retry_key and
then assign that to __key, we'll end up corrupting the btree internals
when we do eg

longcpy(__key, bkey(geo, node, i), geo->keylen);

to return the key value.  What we should do instead is use longcpy() to
copy the key value that retry_key points to __key.

This can cause a btree to get corrupted by seemingly read-only
operations such as btree_for_each_safe.

[akpm@linux-foundation.org: avoid the double longcpy()]
Signed-off-by: Roland Dreier <roland@purestorage.com>
Acked-by: Joern Engel <joern@logfs.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoipc: shm: restore MADV_REMOVE functionality on shared memory segments
Will Deacon [Thu, 7 Jun 2012 21:21:13 +0000]
ipc: shm: restore MADV_REMOVE functionality on shared memory segments

Commit 17cf28afea2a ("mm/fs: remove truncate_range") removed the
truncate_range inode operation in favour of the fallocate file
operation.

When using SYSV IPC shared memory segments, calling madvise with the
MADV_REMOVE advice on an area of shared memory will attempt to invoke
the .fallocate function for the shm_file_operations, which is NULL and
therefore returns -EOPNOTSUPP to userspace.  The previous behaviour
would inherit the inode_operations from the underlying tmpfs file and
invoke truncate_range there.

This patch restores the previous behaviour by wrapping the underlying
fallocate function in shm_fallocate, as we do for fsync.

[hughd@google.com: use -ENOTSUPP in shm_fallocate()]
Signed-off-by: Will Deacon <will.deacon@arm.com>
Acked-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agodrivers/platform/x86/acerhdf.c: correct Boris' mail address
Borislav Petkov [Thu, 7 Jun 2012 21:21:12 +0000]
drivers/platform/x86/acerhdf.c: correct Boris' mail address

Correct mail address reference to a mail account which I actually read.

Signed-off-by: Borislav Petkov <bp@alien8.de>
Cc: Peter Feuerer <peter@piie.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoc/r: prctl: drop VMA flags test on PR_SET_MM_ stack data assignment
Cyrill Gorcunov [Thu, 7 Jun 2012 21:21:12 +0000]
c/r: prctl: drop VMA flags test on PR_SET_MM_ stack data assignment

In commit b76437579d13 ("procfs: mark thread stack correctly in
proc/<pid>/maps") the stack allocated via clone() is marked in
/proc/<pid>/maps as [stack:%d] thus it might be out of the former
mm->start_stack/end_stack values (and even has some custom VMA flags
set).

So to be able to restore mm->start_stack/end_stack drop vma flags test,
but still require the underlying VMA to exist.

As always note this feature is under CONFIG_CHECKPOINT_RESTORE and
requires CAP_SYS_RESOURCE to be granted.

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Serge Hallyn <serge.hallyn@canonical.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoc/r: prctl: add ability to get clear_tid_address
Cyrill Gorcunov [Thu, 7 Jun 2012 21:21:12 +0000]
c/r: prctl: add ability to get clear_tid_address

Zero is written at clear_tid_address when the process exits.  This
functionality is used by pthread_join().

We already have sys_set_tid_address() to change this address for the
current task but there is no way to obtain it from user space.

Without the ability to find this address and dump it we can't restore
pthread'ed apps which call pthread_join() once they have been restored.

This patch introduces the PR_GET_TID_ADDRESS prctl option which allows
the current process to obtain own clear_tid_address.

This feature is available iif CONFIG_CHECKPOINT_RESTORE is set.

[akpm@linux-foundation.org: fix prctl numbering]
Signed-off-by: Andrew Vagin <avagin@openvz.org>
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Pedro Alves <palves@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Tejun Heo <tj@kernel.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoc/r: prctl: add minimal address test to PR_SET_MM
Cyrill Gorcunov [Thu, 7 Jun 2012 21:21:11 +0000]
c/r: prctl: add minimal address test to PR_SET_MM

Make sure the address being set is greater than mmap_min_addr (as
suggested by Kees Cook).

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Serge Hallyn <serge.hallyn@canonical.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoc/r: prctl: update prctl_set_mm_exe_file() after mm->num_exe_file_vmas removal
Konstantin Khlebnikov [Thu, 7 Jun 2012 21:21:11 +0000]
c/r: prctl: update prctl_set_mm_exe_file() after mm->num_exe_file_vmas removal

A fix for commit b32dfe377102 ("c/r: prctl: add ability to set new
mm_struct::exe_file").

After removing mm->num_exe_file_vmas kernel keeps mm->exe_file until
final mmput(), it never becomes NULL while task is alive.

We can check for other mapped files in mm instead of checking
mm->num_exe_file_vmas, and mark mm with flag MMF_EXE_FILE_CHANGED in
order to forbid second changing of mm->exe_file.

Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Reviewed-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoMAINTAINERS: whitespace fixes
Joe Perches [Thu, 7 Jun 2012 21:21:10 +0000]
MAINTAINERS: whitespace fixes

Remove trailing spaces at EOL.
Always use a tab after the type :

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoshmem: replace_page must flush_dcache and others
Hugh Dickins [Thu, 7 Jun 2012 21:21:09 +0000]
shmem: replace_page must flush_dcache and others

Commit bde05d1ccd51 ("shmem: replace page if mapping excludes its zone")
is not at all likely to break for anyone, but it was an earlier version
from before review feedback was incorporated.  Fix that up now.

* shmem_replace_page must flush_dcache_page after copy_highpage [akpm]
* Expand comment on why shmem_unuse_inode needs page_swapcount [akpm]
* Remove excess of VM_BUG_ONs from shmem_replace_page [wangcong]
* Check page_private matches swap before calling shmem_replace_page [hughd]
* shmem_replace_page allow for unexpected race in radix_tree lookup [hughd]

Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Stephane Marchesin <marcheu@chromium.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Rob Clark <rob.clark@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agox86, efi stub: Add .reloc section back into image
Jordan Justen [Thu, 7 Jun 2012 16:05:21 +0000]
x86, efi stub: Add .reloc section back into image

Some UEFI firmware will not load a .efi with a .reloc section
with a size of 0.

Therefore, we create a .efi image with 4 main areas and 3 sections.
1. PE/COFF file header
2. .setup section (covers all setup code following the first sector)
3. .reloc section (contains 1 dummy reloc entry, created in build.c)
4. .text section (covers the remaining kernel image)

To make room for the new .setup section data, the header
bugger_off_msg had to be shortened.

Reported-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Link: http://lkml.kernel.org/r/1339085121-12760-1-git-send-email-jordan.l.justen@intel.com
Tested-by: Lee G Rosenbaum <lee.g.rosenbaum@intel.com>
Tested-by: Henrik Rydberg <rydberg@euromail.se>
Cc: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>

7 years agoMerge tag 'parisc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6
Linus Torvalds [Thu, 7 Jun 2012 16:06:54 +0000]
Merge tag 'parisc-fixes' of git://git./linux/kernel/git/jejb/parisc-2.6

Pull PARISC fixes from James Bottomley:
 "This is a set of three bug fixes for minor build breakages that got
  introduced just before 3.5-rc1 was released."

* tag 'parisc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6:
  [PARISC] fix code to find libgcc
  [PARISC] fix compile break in use of lib/strncopy_from_user.c
  [PARISC] fix missing TAINT_WARN problem

7 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile
Linus Torvalds [Thu, 7 Jun 2012 16:06:13 +0000]
Merge git://git./linux/kernel/git/cmetcalf/linux-tile

Pull tile fixes from Chris Metcalf:
 "These two minor bug fixes fix build failures from some changes that
  were merged in during the 3.5 merge window."

* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  tile: add #include to unbreak build after generic init_task conversion
  tile: remove cpu_idle_on_new_stack

7 years agoUBI: correct ubi_wl_flush locking
Artem Bityutskiy [Thu, 7 Jun 2012 12:15:30 +0000]
UBI: correct ubi_wl_flush locking

Commit "62f38455 UBI: modify ubi_wl_flush function to clear work queue for a lnum"
takes the 'work_sem' semaphore in write mode for the entire loop, which is not
very good because it will block other workers for potentially long time. We do
not need to have it in write mode - read mode is enough, and we do not need to
hole it over the entire loop. So this patch turns changes the locking: takes
'work_sem' in read mode and pushes it down to the loop.

Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>

7 years agoUBIFS: fix debugfs-less systems support
Artem Bityutskiy [Wed, 6 Jun 2012 13:03:10 +0000]
UBIFS: fix debugfs-less systems support

Commit "f70b7e5 UBIFS: remove Kconfig debugging option" broke UBIFS and it
refuses to initialize if debugfs (CONFIG_DEBUG_FS) is disabled. I incorrectly
assumed that debugfs files creation function will return success if debugfs
is disabled, but they actually return -ENODEV. This patch fixes the issue.

Reported-by: Paul Parsons <lost.distance@yahoo.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Tested-by: Paul Parsons <lost.distance@yahoo.com>

7 years agoUBI: fix debugfs-less systems support
Artem Bityutskiy [Wed, 6 Jun 2012 12:22:41 +0000]
UBI: fix debugfs-less systems support

Commit "aa44d1d UBI: remove Kconfig debugging option" broke UBI and it
refuses to initialize if debugfs (CONFIG_DEBUG_FS) is disabled. I incorrectly
assumed that debugfs files creation function will return success if debugfs
is disabled, but they actually return -ENODEV. This patch fixes the issue.

Reported-by: Paul Parsons <lost.distance@yahoo.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Tested-by: Paul Parsons <lost.distance@yahoo.com>

7 years agodrm/i915: pch_irq_handler -> {ibx, cpt}_irq_handler
Adam Jackson [Wed, 6 Jun 2012 19:45:44 +0000]
drm/i915: pch_irq_handler -> {ibx, cpt}_irq_handler

Cougar/Panther Point redefine the bits in SDEIIR pretty completely.
This function is just debugging, but if we're debugging we probably want
to be told accurate things instead of lies.

I'm told Lynx Point changes this yet more, but I have no idea how...

Note from Eugeni's review:

"For the record and for future enabling efforts, for LPT, bits 28-31
and 1-14 are gone since CPT/PPT (e.g., those must be zero). And there
is the bit 15 as a new addition, but we are not using it yet and
probably won't be using in foreseeable future."

Signed-off-by: Adam Jackson <ajax@redhat.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=35103
Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

7 years agoMerge tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck...
Linus Torvalds [Wed, 6 Jun 2012 18:56:45 +0000]
Merge tag 'hwmon-for-linus' of git://git./linux/kernel/git/groeck/linux-staging

Pull hwmon fix from Guenter Roeck:
 "Update e-mail address in MAINTAINERS"

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  MAINTAINERS: Update my e-mail address

7 years agoMerge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Linus Torvalds [Wed, 6 Jun 2012 17:47:15 +0000]
Merge branch 'release' of git://git./linux/kernel/git/lenb/linux

Pull ACPI and Power Management changes from Len Brown.

This does an evil merge to fix up what I think is a mismerge by Len to
the gma500 driver, and restore it to the mainline state.

In that driver, both branches had commented out the call to
acpi_video_register(), and Len resolved the merge to that commented-out
version.

However, in mainline, further changes by Alan (commit d839ede47a56:
"gma500: opregion and ACPI" to be exact) had re-enabled the ACPI video
registration, so the current state of the driver seems to want it.

Alan is apparently still feeling the effects of partying with the Queen,
so he didn't reply to my query, but I'll do the evil merge anyway.

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
  ACPI: fix acpi_bus.h build warnings when ACPI is not enabled
  drivers: acpi: Fix dependency for ACPI_HOTPLUG_CPU
  tools/power turbostat: fix IVB support
  tools/power turbostat: fix un-intended affinity of forked program
  ACPI video: use after input_unregister_device()
  gma500: don't register the ACPI video bus
  acpi_video: Intel video is not always i915
  acpi_video: fix leaking PCI references
  ACPI: Ignore invalid _PSS entries, but use valid ones
  ACPI battery: only refresh the sysfs files when pertinent information changes

7 years agoMerge tag 'rdma-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
Linus Torvalds [Wed, 6 Jun 2012 17:45:21 +0000]
Merge tag 'rdma-fixes' of git://git./linux/kernel/git/roland/infiniband

Pull InfiniBand/RDMA fixes from Roland Dreier:
 "All in hardware drivers:
   - Fix crash in cxgb4
   - Fixes to new ocrdma driver
   - Regression fixes for mlx4"

* tag 'rdma-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  IB/mlx4: Fix max_wqe capacity reported from query device
  mlx4_core: Fix setting VL_cap in mlx4_SET_PORT wrapper flow
  IB/mlx4: Fix EQ deallocation in legacy mode
  RDMA/cxgb4: Fix crash when peer address is 0.0.0.0
  RDMA/ocrdma: Remove unnecessary version.h includes
  RDMA/ocrdma: Fix signaled event for SRQ_LIMIT_REACHED
  RDMA/ocrdma: Correct queue free count math

7 years agoMerge branches 'cxgb4', 'mlx4' and 'ocrdma' into for-linus
Roland Dreier [Wed, 6 Jun 2012 17:08:11 +0000]
Merge branches 'cxgb4', 'mlx4' and 'ocrdma' into for-linus

7 years agoIB/mlx4: Fix max_wqe capacity reported from query device
Sagi Grimberg [Thu, 24 May 2012 13:08:08 +0000]
IB/mlx4: Fix max_wqe capacity reported from query device

1. Limit the max number of WQEs per QP reported when querying the
   device, so that ib_create_qp() will not fail for a QP size that the
   device claimed to support due to additional headroom WQEs being
   allocated.

2. Limit qp resources accepted for ib_create_qp() to the limits
   reported in ib_query_device().  In kernel space, make sure that the
   limits returned to the caller following qp creation also lie within
   the reported device limits. For userspace, report as before, and do
   adjustment in libmlx4 (so as not to break ABI).

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Sagi Grimberg <sagig@mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>

7 years agomlx4_core: Fix setting VL_cap in mlx4_SET_PORT wrapper flow
Jack Morgenstein [Thu, 24 May 2012 13:08:09 +0000]
mlx4_core: Fix setting VL_cap in mlx4_SET_PORT wrapper flow

Commit 096335b3f983 ("mlx4_core: Allow dynamic MTU configuration for
IB ports") modifies the port VL setting.  This exposes a bug in
mlx4_common_set_port(), where the VL cap value passed in (inside the
command mailbox) is incorrectly zeroed-out:

mlx4_SET_PORT modifies the VL_cap field (byte 3 of the mailbox).
Since the SET_PORT command is paravirtualized on the master as well as
on the slaves, mlx4_SET_PORT_wrapper() is invoked on the master.  This
calls mlx4_common_set_port() where mailbox byte 3 gets overwritten by
code which should only set a single bit in that byte (for the reset
qkey counter flag) -- but instead overwrites the entire byte.

The result is that when running in SR-IOV mode, the VL_cap will be set
to zero -- fix this.

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>

7 years agoMerge tag 'md-3.5-fixes' of git://neil.brown.name/md
Linus Torvalds [Wed, 6 Jun 2012 16:49:28 +0000]
Merge tag 'md-3.5-fixes' of git://neil.brown.name/md

Pull two md fixes from NeilBrown:
 "One sparse-warning fix, one bugfix for 3.4-stable"

* tag 'md-3.5-fixes' of git://neil.brown.name/md:
  md: raid1/raid10: fix problem with merge_bvec_fn
  lib/raid6: fix sparse warnings in recovery functions

7 years agoMerge tag 'iommu-fixes-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Wed, 6 Jun 2012 16:47:57 +0000]
Merge tag 'iommu-fixes-3.5-rc1' of git://git./linux/kernel/git/joro/iommu

Pull IOMMU fixes from Joerg Roedel:
 "Two patches are in here which fix AMD IOMMU specific issues.  One
  patch fixes a long-standing warning on resume because the
  amd_iommu_resume function enabled interrupts.  The other patch fixes a
  deadlock in an error-path of the page-fault request handling code of
  the IOMMU driver.

* tag 'iommu-fixes-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/amd: Fix deadlock in ppr-handling error path
  iommu/amd: Cache pdev pointer to root-bridge

7 years agotile: add #include to unbreak build after generic init_task conversion
Chris Metcalf [Wed, 6 Jun 2012 15:23:19 +0000]
tile: add #include to unbreak build after generic init_task conversion

Some code was moved from init_task.c to setup.c but the appropriate
header needed to be moved as well.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>

7 years agotile: remove cpu_idle_on_new_stack
Chris Metcalf [Wed, 6 Jun 2012 15:21:44 +0000]
tile: remove cpu_idle_on_new_stack

This routine isn't used unless CONFIG_HOMECACHE is enabled, which
isn't even available as a public configuration option yet.
Since it no longer links correctly in 3.4, just remove it for now.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>

7 years agoperf/x86: Check user address explicitly in copy_from_user_nmi()
Arun Sharma [Fri, 20 Apr 2012 22:41:36 +0000]
perf/x86: Check user address explicitly in copy_from_user_nmi()

Signed-off-by: Arun Sharma <asharma@fb.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1334961696-19580-5-git-send-email-asharma@fb.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

7 years agoperf/x86: Check if user fp is valid
Arun Sharma [Fri, 20 Apr 2012 22:41:35 +0000]
perf/x86: Check if user fp is valid

Signed-off-by: Arun Sharma <asharma@fb.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1334961696-19580-4-git-send-email-asharma@fb.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

7 years agoperf: Limit callchains to 127
Arun Sharma [Fri, 20 Apr 2012 22:41:34 +0000]
perf: Limit callchains to 127

Stack depth of 255 seems excessive, given that copy_from_user_nmi()
could be slow.

Signed-off-by: Arun Sharma <asharma@fb.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1334961696-19580-3-git-send-email-asharma@fb.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

7 years agoperf/x86: Allow multiple stacks
Arun Sharma [Fri, 20 Apr 2012 22:41:33 +0000]
perf/x86: Allow multiple stacks

Without this patch, applications with two different stack
regions (eg: native stack vs JIT stack) get truncated
callchains even when RBP chaining is present. GDB shows proper
stack traces and the frame pointer chaining is intact.

This patch disables the (fp < RSP) check, hoping that other checks
in the code save the day for us. In our limited testing, this
didn't seem to break anything.

In the long term, we could potentially have userspace advise
the kernel on the range of valid stack addresses, so we don't
spend a lot of time unwinding from bogus addresses.

Signed-off-by: Arun Sharma <asharma@fb.com>
CC: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-perf-users@vger.kernel.org
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1334961696-19580-2-git-send-email-asharma@fb.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

7 years agosched: Fix the relax_domain_level boot parameter
Dimitri Sivanich [Tue, 5 Jun 2012 18:44:36 +0000]
sched: Fix the relax_domain_level boot parameter

It does not get processed because sched_domain_level_max is 0 at the
time that setup_relax_domain_level() is run.

Simply accept the value as it is, as we don't know the value of
sched_domain_level_max until sched domain construction is completed.

Fix sched_relax_domain_level in cpuset.  The build_sched_domain() routine calls
the set_domain_attribute() routine prior to setting the sd->level, however,
the set_domain_attribute() routine relies on the sd->level to decide whether
idle load balancing will be off/on.

Signed-off-by: Dimitri Sivanich <sivanich@sgi.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20120605184436.GA15668@sgi.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

7 years agochar/agp: add another Ironlake host bridge
Eugeni Dodonov [Wed, 6 Jun 2012 14:59:06 +0000]
char/agp: add another Ironlake host bridge

This seems to come on Gigabyte H55M-S2V and was discovered through the
https://bugs.freedesktop.org/show_bug.cgi?id=50381 debugging.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=50381
Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

7 years agoperf/x86: Update SNB PEBS constraints
Peter Zijlstra [Tue, 5 Jun 2012 08:26:43 +0000]
perf/x86: Update SNB PEBS constraints

Afaict there's no need to (incompletely) iterate the
MEM_UOPS_RETIRED.* umask state.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1338884803.28282.153.camel@twins
Signed-off-by: Ingo Molnar <mingo@kernel.org>

7 years agoperf/x86: Enable/Add IvyBridge hardware support
Peter Zijlstra [Tue, 5 Jun 2012 08:26:43 +0000]
perf/x86: Enable/Add IvyBridge hardware support

Implement rudimentary IVB perf support. The SDM states its identical
to SNB with exception of the exact event tables, but a quick look
suggests they're similar enough.

Also mark SNB-EP as broken for now.

Requested-and-tested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1338884803.28282.153.camel@twins
Signed-off-by: Ingo Molnar <mingo@kernel.org>

7 years agoperf/x86: Implement cycles:p for SNB/IVB
Peter Zijlstra [Tue, 5 Jun 2012 08:26:43 +0000]
perf/x86: Implement cycles:p for SNB/IVB

Now that there's finally a chip with working PEBS (IvyBridge), we can
enable the hardware and implement cycles:p for SNB/IVB.

Cc: Stephane Eranian <eranian@google.com>
Requested-and-tested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1338884803.28282.153.camel@twins
Signed-off-by: Ingo Molnar <mingo@kernel.org>

7 years agoperf/x86: Fix Intel shared extra MSR allocation
Peter Zijlstra [Tue, 5 Jun 2012 13:30:31 +0000]
perf/x86: Fix Intel shared extra MSR allocation

Zheng Yan reported that event group validation can wreck event state
when Intel extra_reg allocation changes event state.

Validation shouldn't change any persistent state. Cloning events in
validate_{event,group}() isn't really pretty either, so add a few
special cases to avoid modifying the event state.

The code is restructured to minimize the special case impact.

Reported-by: Zheng Yan <zheng.z.yan@linux.intel.com>
Acked-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1338903031.28282.175.camel@twins
Signed-off-by: Ingo Molnar <mingo@kernel.org>

7 years agosched: Validate assumptions in sched_init_numa()
Peter Zijlstra [Thu, 31 May 2012 19:20:16 +0000]
sched: Validate assumptions in sched_init_numa()

Add some code to validate assumptions we're making and output
warnings if they are not.

If this trigger we want to know about it.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Alex Shi <lkml.alex@gmail.com>
Link: http://lkml.kernel.org/n/tip-6uc3wk5s9udxtdl9cnku0vtt@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>

7 years agosched: Always initialize cpu-power
Peter Zijlstra [Thu, 31 May 2012 10:05:32 +0000]
sched: Always initialize cpu-power

Often when we run into mis-shapen topologies the balance iteration
fails to update the cpu power properly and we'll end up in /0 traps.

Always initialize the cpu-power to a semi-sane value so that we can
at least boot the machine, even if the load-balancer might not
function correctly.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-3lbhyj25sr169ha7z3qht5na@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>

7 years agosched: Fix domain iteration
Peter Zijlstra [Thu, 31 May 2012 12:47:33 +0000]
sched: Fix domain iteration

Weird topologies can lead to asymmetric domain setups. This needs
further consideration since these setups are typically non-minimal
too.

For now, make it work by adding an extra mask selecting which CPUs
are allowed to iterate up.

The topology that triggered it is the one from David Rientjes:

10 20 20 30
20 10 20 20
20 20 10 20
30 20 20 10

resulting in boxes that wouldn't even boot.

Reported-by: David Rientjes <rientjes@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-3p86l9cuaqnxz7uxsojmz5rm@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>

7 years agosched/rt: Fix lockdep annotation within find_lock_lowest_rq()
Peter Zijlstra [Thu, 17 May 2012 19:19:46 +0000]
sched/rt: Fix lockdep annotation within find_lock_lowest_rq()

Roland Dreier reported spurious, hard to trigger lockdep warnings
within the scheduler - without any real lockup.

This bit gives us the right clue:

> [89945.640512]  [<ffffffff8103fa1a>] double_lock_balance+0x5a/0x90
> [89945.640568]  [<ffffffff8104c546>] push_rt_task+0xc6/0x290

if you look at that code you'll find the double_lock_balance() in
question is the one in find_lock_lowest_rq() [yay for inlining].

Now find_lock_lowest_rq() has a bug.. it fails to use
double_unlock_balance() in one exit path, if this results in a retry in
push_rt_task() we'll call double_lock_balance() again, at which point
we'll run into said lockdep confusion.

Reported-by: Roland Dreier <roland@kernel.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1337282386.4281.77.camel@twins
Signed-off-by: Ingo Molnar <mingo@kernel.org>

7 years agosched/numa: Load balance between remote nodes
Alex Shi [Wed, 6 Jun 2012 06:52:51 +0000]
sched/numa: Load balance between remote nodes

Commit cb83b629b ("sched/numa: Rewrite the CONFIG_NUMA sched
domain support") removed the NODE sched domain and started checking
if the node distance in SLIT table is farther than REMOTE_DISTANCE,
if so, it will lose the load balance chance at exec/fork/wake_affine
points.

But actually, even the node distance is farther than REMOTE_DISTANCE.

Modern CPUs also has QPI like connections, which ensures that memory
access is not too slow between nodes. So the above change in behavior
on NUMA machine causes a performance regression on various benchmarks:
hackbench, tbench, netperf, oltp, etc.

This patch will recover the scheduler behavior to old mode on all my
Intel platforms: NHM EP/EX, WSM EP, SNB EP/EP4S, and thus fixes the
perfromance regressions. (all of them just have 2 kinds distance, 10, 21)

Signed-off-by: Alex Shi <alex.shi@intel.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1338965571-9812-1-git-send-email-alex.shi@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

7 years agosched/x86: Calculate booted cores after construction of sibling_mask
Kamalesh Babulal [Thu, 31 May 2012 07:37:38 +0000]
sched/x86: Calculate booted cores after construction of sibling_mask

Commit 316ad248307fb ("sched/x86: Rewrite set_cpu_sibling_map()")
broke the booted_cores accounting.

The problem is that the booted_cores accounting needs all the
sibling links set up. So restore the second loop and add a comment as
to why its needed.

On qemu booted with -smp sockets=1,cores=2,threads=2;
Before:
 $ grep cores /proc/cpuinfo
 cpu cores       : 2
 cpu cores       : 1
 cpu cores       : 4
 cpu cores       : 3

With the patch:
 $ grep cores /proc/cpuinfo
 cpu cores       : 2
 cpu cores       : 2
 cpu cores       : 2
 cpu cores       : 2

Reported-by: Prarit Bhargava <prarit@redhat.com>
Reported-by: Borislav Petkov <bp@amd64.org>
Signed-off-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20120531073738.GH7511@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

7 years agox86/ioapic: Fix NULL pointer dereference on CPU hotplug after disabling irqs
Tomoki Sekiyama [Mon, 28 May 2012 09:09:18 +0000]
x86/ioapic: Fix NULL pointer dereference on CPU hotplug after disabling irqs

In current Linux, percpu variable `vector_irq' is not cleared on
offlined cpus while disabling devices' irqs. If the cpu that has
the disabled irqs in vector_irq is hotplugged,
__setup_vector_irq() hits invalid irq vector and may crash.

This bug can be reproduced as following;

  # echo 0 > /sys/devices/system/cpu/cpu7/online
  # modprobe -r some_driver_using_interrupts      # vector_irq@cpu7 uncleared
  # echo 1 > /sys/devices/system/cpu/cpu7/online  # kernel may crash

This patch fixes this bug by clearing vector_irq in
__clear_irq_vector() even if the cpu is offlined.

Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama.qu@hitachi.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: yrl.pp-manager.tt@hitachi.com
Cc: ltc-kernel@ml.yrl.intra.hitachi.co.jp
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Alexander Gordeev <agordeev@redhat.com>
Link: http://lkml.kernel.org/r/4FC340BE.7080101@hitachi.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

7 years agox86/reboot: Fix a warning message triggered by stop_other_cpus()
Feng Tang [Wed, 30 May 2012 15:15:41 +0000]
x86/reboot: Fix a warning message triggered by stop_other_cpus()

When rebooting our 24 CPU Westmere servers with 3.4-rc6, we
always see this warning msg:

Restarting system.
machine restart
------------[ cut here ]------------
WARNING: at arch/x86/kernel/smp.c:125
native_smp_send_reschedule+0x74/0xa7() Hardware name: X8DTN
Modules linked in: igb [last unloaded: scsi_wait_scan]
Pid: 1, comm: systemd-shutdow Not tainted 3.4.0-rc6+ #22
Call Trace:
 <IRQ>  [<ffffffff8102a41f>] warn_slowpath_common+0x7e/0x96
 [<ffffffff8102a44c>] warn_slowpath_null+0x15/0x17
 [<ffffffff81018cf7>] native_smp_send_reschedule+0x74/0xa7
 [<ffffffff810561c1>] trigger_load_balance+0x279/0x2a6
 [<ffffffff81050112>] scheduler_tick+0xe0/0xe9
 [<ffffffff81036768>] update_process_times+0x60/0x70
 [<ffffffff81062f2f>] tick_sched_timer+0x68/0x92
 [<ffffffff81046e33>] __run_hrtimer+0xb3/0x13c
 [<ffffffff81062ec7>] ? tick_nohz_handler+0xd0/0xd0
 [<ffffffff810474f2>] hrtimer_interrupt+0xdb/0x198
 [<ffffffff81019a35>] smp_apic_timer_interrupt+0x81/0x94
 [<ffffffff81655187>] apic_timer_interrupt+0x67/0x70
 <EOI>  [<ffffffff8101a3c4>] ? default_send_IPI_mask_allbutself_phys+0xb4/0xc4
 [<ffffffff8101c680>] physflat_send_IPI_allbutself+0x12/0x14
 [<ffffffff81018db4>] native_nmi_stop_other_cpus+0x8a/0xd6
 [<ffffffff810188ba>] native_machine_shutdown+0x50/0x67
 [<ffffffff81018926>] machine_shutdown+0xa/0xc
 [<ffffffff8101897e>] native_machine_restart+0x20/0x32
 [<ffffffff810189b0>] machine_restart+0xa/0xc
 [<ffffffff8103b196>] kernel_restart+0x47/0x4c
 [<ffffffff8103b2e6>] sys_reboot+0x13e/0x17c
 [<ffffffff8164e436>] ? _raw_spin_unlock_bh+0x10/0x12
 [<ffffffff810fcac9>] ? bdi_queue_work+0xcf/0xd8
 [<ffffffff810fe82f>] ? __bdi_start_writeback+0xae/0xb7
 [<ffffffff810e0d64>] ? iterate_supers+0xa3/0xb7
 [<ffffffff816547a2>] system_call_fastpath+0x16/0x1b
---[ end trace 320af5cb1cb60c5b ]---

The root cause seems to be the
default_send_IPI_mask_allbutself_phys() takes quite some time (I
measured it could be several ms) to complete sending NMIs to all
the other 23 CPUs, and for HZ=250/1000 system, the time is long
enough for a timer interrupt to happen, which will in turn
trigger to kick load balance to a stopped CPU and cause this
warning in native_smp_send_reschedule().

So disabling the local irq before stop_other_cpu() can fix this
problem (tested 25 times reboot ok), and it is fine as there
should be nobody caring the timer interrupt in such reboot
stage.

The latest 3.4 kernel slightly changes this behavior by sending
REBOOT_VECTOR first and only send NMI_VECTOR if the REBOOT_VCTOR
fails, and this patch is still needed to prevent the problem.

Signed-off-by: Feng Tang <feng.tang@intel.com>
Acked-by: Don Zickus <dzickus@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120530231541.4c13433a@feng-i7
Signed-off-by: Ingo Molnar <mingo@kernel.org>

7 years agox86/intel/moorestown: Change intel_scu_devices_create() to __devinit
Sebastian Andrzej Siewior [Thu, 31 May 2012 21:20:25 +0000]
x86/intel/moorestown: Change intel_scu_devices_create() to __devinit

The allmodconfig hits:

 WARNING: vmlinux.o(.text+0x6553d): Section mismatch in
          reference from the function intel_scu_devices_create() to the
          function .devinit.text: spi_register_board_info()
  [...]

This patch marks intel_scu_devices_create() as devinit because
it only calls a devinit function, spi_register_board_info().

Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Feng Tang <feng.tang@intel.com>
Link: http://lkml.kernel.org/r/20120531212025.GA8519@breakpoint.cc
Signed-off-by: Ingo Molnar <mingo@kernel.org>

7 years agox86/numa: Set numa_nodes_parsed at acpi_numa_memory_affinity_init()
Yasuaki Ishimatsu [Mon, 4 Jun 2012 02:42:32 +0000]
x86/numa: Set numa_nodes_parsed at acpi_numa_memory_affinity_init()

When hot-adding a CPU, the system outputs following messages
since node_to_cpumask_map[2] was not allocated memory.

Booting Node 2 Processor 32 APIC 0xc0
node_to_cpumask_map[2] NULL
Pid: 0, comm: swapper/32 Tainted: G       A     3.3.5-acd #21
Call Trace:
 [<ffffffff81048845>] debug_cpumask_set_cpu+0x155/0x160
 [<ffffffff8105e28a>] ? add_timer_on+0xaa/0x120
 [<ffffffff8150665f>] numa_add_cpu+0x1e/0x22
 [<ffffffff815020bb>] identify_cpu+0x1df/0x1e4
 [<ffffffff815020d6>] identify_econdary_cpu+0x16/0x1d
 [<ffffffff81504614>] smp_store_cpu_info+0x3c/0x3e
 [<ffffffff81505263>] smp_callin+0x139/0x1be
 [<ffffffff815052fb>] start_secondary+0x13/0xeb

The reason is that the bit of node 2 was not set at
numa_nodes_parsed. numa_nodes_parsed is set by only
acpi_numa_processor_affinity_init /
acpi_numa_x2apic_affinity_init. Thus even if hot-added memory
which is same PXM as hot-added CPU is written in ACPI SRAT
Table, if the hot-added CPU is not written in ACPI SRAT table,
numa_nodes_parsed is not set.

But according to ACPI Spec Rev 5.0, it says about ACPI SRAT
table as follows: This optional table provides information that
allows OSPM to associate processors and memory ranges, including
ranges of memory provided by hot-added memory devices, with
system localities / proximity domains and clock domains.

It means that ACPI SRAT table only provides information for CPUs
present at boot time and for memory including hot-added memory.
So hot-added memory is written in ACPI SRAT table, but hot-added
CPU is not written in it. Thus numa_nodes_parsed should be set
by not only acpi_numa_processor_affinity_init /
acpi_numa_x2apic_affinity_init but also
acpi_numa_memory_affinity_init for the case.

Additionally, if system has cpuless memory node,
acpi_numa_processor_affinity_init /
acpi_numa_x2apic_affinity_init cannot set numa_nodes_parseds
since these functions cannot find cpu description for the node.
In this case, numa_nodes_parsed needs to be set by
acpi_numa_memory_affinity_init.

Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: liuj97@gmail.com
Cc: kosaki.motohiro@gmail.com
Link: http://lkml.kernel.org/r/4FCC2098.4030007@jp.fujitsu.com
[ merged it ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>

7 years agox86/gart: Fix kmemleak warning
Xiaotian Feng [Tue, 5 Jun 2012 19:00:31 +0000]
x86/gart: Fix kmemleak warning

aperture_64.c now is using memblock, the previous
kmemleak_ignore() for alloc_bootmem() should be removed then.

Otherwise, with kmemleak enabled, kernel will throw warnings
like:

[    0.000000] kmemleak: Trying to color unknown object at 0xffff8800c4000000 as Black
[    0.000000] Pid: 0, comm: swapper/0 Not tainted 3.5.0-rc1-next-20120605+ #130
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff811b27e6>] paint_ptr+0x66/0xc0
[    0.000000]  [<ffffffff816b90fb>] kmemleak_ignore+0x2b/0x60
[    0.000000]  [<ffffffff81ef7bc0>] kmemleak_init+0x217/0x2c1
[    0.000000]  [<ffffffff81ed2b97>] start_kernel+0x32d/0x3eb
[    0.000000]  [<ffffffff81ed25e4>] ? repair_env_string+0x5a/0x5a
[    0.000000]  [<ffffffff81ed2356>] x86_64_start_reservations+0x131/0x135
[    0.000000]  [<ffffffff81ed2120>] ? early_idt_handlers+0x120/0x120
[    0.000000]  [<ffffffff81ed245c>] x86_64_start_kernel+0x102/0x111
[    0.000000] kmemleak: Early log backtrace:
[    0.000000]    [<ffffffff816b911b>] kmemleak_ignore+0x4b/0x60
[    0.000000]    [<ffffffff81ee6a38>] gart_iommu_hole_init+0x3e7/0x547
[    0.000000]    [<ffffffff81edb20b>] pci_iommu_alloc+0x44/0x6f
[    0.000000]    [<ffffffff81ee81ad>] mem_init+0x19/0xec
[    0.000000]    [<ffffffff81ed2a54>] start_kernel+0x1ea/0x3eb
[    0.000000]    [<ffffffff81ed2356>] x86_64_start_reservations+0x131/0x135
[    0.000000]    [<ffffffff81ed245c>] x86_64_start_kernel+0x102/0x111
[    0.000000]    [<ffffffffffffffff>] 0xffffffffffffffff

Signed-off-by: Xiaotian Feng <dannyfeng@tencent.com>
Cc: Xiaotian Feng <xtfeng@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/1338922831-2847-1-git-send-email-xtfeng@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

7 years agox86: mce: Add the dropped timer interval init back
Thomas Gleixner [Wed, 6 Jun 2012 09:33:21 +0000]
x86: mce: Add the dropped timer interval init back

commit 82f7af09 ("x86/mce: Cleanup timer mess) dropped the
initialization of the per cpu timer interval. Duh :(

Restore the previous behaviour.

Reported-by: Chen Gong <gong.chen@linux.intel.com>
Cc: bp@amd64.org
Cc: tony.luck@intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

7 years agox86/decoder: Fix bsr/bsf/jmpe decoding with operand-size prefix
Masami Hiramatsu [Mon, 4 Jun 2012 15:09:11 +0000]
x86/decoder: Fix bsr/bsf/jmpe decoding with operand-size prefix

Fix the x86 instruction decoder to decode bsr/bsf/jmpe with
operand-size prefix (66h). This fixes the test case failure
reported by Linus, attached below.

bsf/bsr/jmpe have a special encoding. Opcode map in
Intel Software Developers Manual vol2 says they have
TZCNT/LZCNT variants if it has F3h prefix. However, there
is no information if it has other 66h or F2h prefixes.
Current instruction decoder supposes that those are
bad instructions, but it actually accepts at least
operand-size prefixes.

H. Peter Anvin further explains:

 " TZCNT/LZCNT are F3 + BSF/BSR exactly because the F2 and
   F3 prefixes have historically been no-ops with most instructions.
   This allows software to unconditionally use the prefixed versions
   and get TZCNT/LZCNT on the processors that have them if they don't
   care about the difference. "

This fixes errors reported by test_get_len:

  Warning: arch/x86/tools/test_get_len found difference at <em_bsf>:ffffffff81036d87
  Warning: ffffffff81036de5: 66 0f bc c2           bsf    %dx,%ax
  Warning: objdump says 4 bytes, but insn_get_length() says 3
  Warning: arch/x86/tools/test_get_len found difference at <em_bsr>:ffffffff81036ea6
  Warning: ffffffff81036f04: 66 0f bd c2           bsr    %dx,%ax
  Warning: objdump says 4 bytes, but insn_get_length() says 3
  Warning: decoded and checked 13298882 instructions with 2 warnings

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <yrl.pp-manager.tt@hitachi.com>
Link: http://lkml.kernel.org/r/20120604150911.22338.43296.stgit@localhost.localdomain
Signed-off-by: Ingo Molnar <mingo@kernel.org>

7 years agoMerge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git...
Ingo Molnar [Wed, 6 Jun 2012 06:40:10 +0000]
Merge tag 'perf-urgent-for-mingo' of git://git./linux/kernel/git/acme/linux into perf/urgent

Pull perf fixes from Arnaldo Carvalho de Melo:

 * Endianness fixes from Jiri Olsa

 * Fixes for make perf tarball

 * Fix for DSO name in perf script callchains, from David Ahern

 * Segfault fixes for perf top --callchain, from Namhyung Kim

 * Minor function result fixes from Srikar Dronamraju

 * Add missing 3rd ioctl parameter, from Namhyung Kim

 * Fix pager usage in minimal embedded systems, from Avik Sil

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

7 years agox86/mce: Fix the MCE poll timer logic
Chen Gong [Tue, 5 Jun 2012 02:35:02 +0000]
x86/mce: Fix the MCE poll timer logic

In commit 82f7af09 ("x86/mce: Cleanup timer mess), Thomas just
forgot the "/ 2" there while cleaning up.

Signed-off-by: Chen Gong <gong.chen@linux.intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: bp@amd64.org
Cc: tony.luck@intel.com
Link: http://lkml.kernel.org/r/1338863702-9245-1-git-send-email-gong.chen@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

7 years agoMerge tag 'please-pull-mce' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Linus Torvalds [Tue, 5 Jun 2012 22:15:04 +0000]
Merge tag 'please-pull-mce' of git://git./linux/kernel/git/ras/ras

Pull MCE regression fix from Tony Luck:
 "Typo/thinko in a cleanup caused a semantic change. Fix it."

* tag 'please-pull-mce' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  x86/mce: Fix the MCE poll timer logic

7 years agoMerge branch 'fixes-for-linus' of git://git.linaro.org/people/mszyprowski/linux-dma...
Linus Torvalds [Tue, 5 Jun 2012 20:23:17 +0000]
Merge branch 'fixes-for-linus' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping

Pull arm CMA fix from Marek Szyprowski:
 "This removes the ARMv6+ CMA dependency and lets one use old, well-
  tested dma-mapping implementation also on ARMv6+ systems without the
  need to use EXPERIMENTAL stuff."

Russell King complained (rightly) about the experimental feature being
forced on by the ARM config.

Here CMA is "continuous memory allocator", not "cross-memory attach".
We really neet to stop using insane TLA's for things that aren't big
industry standards.

* 'fixes-for-linus' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping:
  ARM: dma-mapping: remove unconditional dependency on CMA

7 years agoMAINTAINERS: add linux-leds mail list address and git URL
Bryan Wu [Thu, 31 May 2012 11:51:37 +0000]
MAINTAINERS: add linux-leds mail list address and git URL

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agodrm/i915: fix up ivb plane 3 pageflips
Daniel Vetter [Wed, 23 May 2012 12:02:00 +0000]
drm/i915: fix up ivb plane 3 pageflips

Or at least plug another gapping hole. Apparrently hw desingers only
moved the bit field, but did not bother ot re-enumerate the planes
when adding support for a 3rd pipe.

Discovered by i-g-t/flip_test.

This may or may not fix the reference bugzilla, because that one
smells like we have still larger fish to fry.

v2: Fixup the impossible case to catch programming errors, noticed by
Chris Wilson.

References: https://bugs.freedesktop.org/show_bug.cgi?id=50069
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Eugeni Dodonov <eugeni.dodonov@intel.com>
Cc: stable@vger.kernel.org
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

7 years agoMAINTAINERS: update util-linux info
Karel Zak [Fri, 1 Jun 2012 08:13:09 +0000]
MAINTAINERS: update util-linux info

Signed-off-by: Karel Zak <kzak@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoMerge branch '3.5-merge-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nab...
Linus Torvalds [Tue, 5 Jun 2012 18:55:27 +0000]
Merge branch '3.5-merge-fixes' of git://git./linux/kernel/git/nab/target-pending

Pull two scsi target fixes from Nicholas Bellinger:
 "The first is a small name-space collision fix from Stefan for the new
  sbp-target / ieee-1394 code, and second is the FILEIO backend
  conversion patch to always use O_DSYNC by default instead of O_SYNC as
  recommended by hch.  Note the latter is CC'ed stable."

* '3.5-merge-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
  target/file: Use O_DSYNC by default for FILEIO backends
  sbp-target: rename a variable to avoid name clash

7 years agoMerge branch 'for-3.5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj...
Linus Torvalds [Tue, 5 Jun 2012 18:54:12 +0000]
Merge branch 'for-3.5-fixes' of git://git./linux/kernel/git/tj/cgroup

Pull cgroup fix from Tejun Heo:
 "This fixes the possible premature superblock release on umount bug
  mentioned during v3.5-rc1 pull request.

  Originally, cgroup dentry destruction path assumed that cgroup dentry
  didn't have any reference left after cgroup removal thus put super
  during dentry removal.  Now that there can be lingering dentry
  references, this led to super being put with live dentries.  This
  patch fixes the problem by putting super ref on dentry release instead
  of removal."

* 'for-3.5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: superblock can't be released with active dentries

7 years agoMerge branch 'i2c-embedded/for-current' of git://git.pengutronix.de/git/wsa/linux
Linus Torvalds [Tue, 5 Jun 2012 17:55:31 +0000]
Merge branch 'i2c-embedded/for-current' of git://git.pengutronix.de/git/wsa/linux

Pull embedded i2c update from Wolfram Sang:
 "This only contains one new driver which had multiple dependencies
  (pinctrl, i2c-mux-rework, new devm_* functions), so I decided to wait
  for rc1.  Plus, it had to wait a little for the ack of a devicetree
  maintainer since the bindings were not trivial enough for me to pass
  through.

  So, given that, I hope there is still something like the "new driver
  rule", so we could have the driver in 3.5 and people can start using
  it.  That would make merging support for some boards easier for 3.6
  since the dependency on this driver is gone then."

* 'i2c-embedded/for-current' of git://git.pengutronix.de/git/wsa/linux:
  i2c: Add generic I2C multiplexer using pinctrl API

7 years agoMerge git://git.kernel.org/pub/scm/virt/kvm/kvm
Linus Torvalds [Tue, 5 Jun 2012 17:54:30 +0000]
Merge git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull kvm fix from Avi Kivity:
 "A one-liner fix for a buffer overflow"

* git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: Fix buffer overflow in kvm_set_irq()

7 years agoMerge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Linus Torvalds [Tue, 5 Jun 2012 17:53:26 +0000]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux

Pull drm radeon fixes from Dave Airlie:
 "This is just radeon fixes and a bunch of new PCI ids.  The fixes are
  for a deadlock, an audio regression, and a couple of audio fixes."

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/radeon/kms: add new SI PCI ids
  drm/radeon/kms: add new BTC PCI ids
  drm/radeon/kms: add new Palm, Sumo PCI ids
  drm/radeon/kms: add new Trinity PCI ids
  drm/radeon: fix vm deadlocks on cayman
  drm/radeon: fix gpu_init on si
  drm/radeon/hdmi: don't set SEND_MAX_PACKETS bit
  drm/radeon/audio: don't hardcode CRTC id
  drm/radeon: make audio_init consistent across asics

7 years agoradix-tree: fix contiguous iterator
Konstantin Khlebnikov [Tue, 5 Jun 2012 17:36:33 +0000]
radix-tree: fix contiguous iterator

This patch fixes bug in macro radix_tree_for_each_contig().

If radix_tree_next_slot() sees NULL in next slot it returns NULL, but following
radix_tree_next_chunk() switches iterating into next chunk. As result iterating
becomes non-contiguous and breaks vfs "splice" and all its users.

Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Reported-and-bisected-by: Hans de Bruin <jmdebruin@xmsnet.nl>
Reported-and-bisected-by: Ondrej Zary <linux@rainbow-software.org>
Reported-bisected-and-tested-by: Toralf Förster <toralf.foerster@gmx.de>
Link: https://lkml.org/lkml/2012/6/5/64
Cc: stable <stable@vger.kernel.org> # 3.4.x
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agox86/mce: Fix the MCE poll timer logic
Chen Gong [Tue, 5 Jun 2012 02:35:02 +0000]
x86/mce: Fix the MCE poll timer logic

In commit 82f7af09 (x86/mce: Cleanup timer mess), Thomas just forgot
the "/ 2" there while cleaning up.

Signed-off-by: Chen Gong <gong.chen@linux.intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>

7 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi...
Linus Torvalds [Tue, 5 Jun 2012 17:11:11 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/mszeredi/fuse

Pull fuse updates from Miklos Szeredi.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: fix blksize calculation
  fuse: fix stat call on 32 bit platforms
  fuse: optimize fallocate on permanent failure
  fuse: add FALLOCATE operation
  fuse: Convert to kstrtoul_from_user

7 years agoMerge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Tue, 5 Jun 2012 16:47:15 +0000]
Merge branch 'sched-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull scheduler fixes from Ingo Molnar.

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched: Remove NULL assignment of dattr_cur
  sched: Remove the last NULL entry from sched_feat_names
  sched: Make sched_feat_names const
  sched/rt: Fix SCHED_RR across cgroups
  sched: Move nr_cpus_allowed out of 'struct sched_rt_entity'
  sched: Make sure to not re-read variables after validation
  sched: Fix SD_OVERLAP
  sched: Don't try allocating memory from offline nodes
  sched/nohz: Fix rq->cpu_load calculations some more
  sched/x86: Use cpu_llc_shared_mask(cpu) for coregroup_mask

7 years agodrm/radeon/kms: add new SI PCI ids
Alex Deucher [Tue, 5 Jun 2012 13:50:31 +0000]
drm/radeon/kms: add new SI PCI ids

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

7 years agodrm/radeon/kms: add new BTC PCI ids
Alex Deucher [Tue, 5 Jun 2012 13:50:30 +0000]
drm/radeon/kms: add new BTC PCI ids

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

7 years agodrm/radeon/kms: add new Palm, Sumo PCI ids
Alex Deucher [Tue, 5 Jun 2012 13:50:29 +0000]
drm/radeon/kms: add new Palm, Sumo PCI ids

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

7 years agodrm/radeon/kms: add new Trinity PCI ids
Alex Deucher [Tue, 5 Jun 2012 13:50:28 +0000]
drm/radeon/kms: add new Trinity PCI ids

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

7 years agoKVM: Fix buffer overflow in kvm_set_irq()
Avi Kivity [Sun, 22 Apr 2012 14:02:11 +0000]
KVM: Fix buffer overflow in kvm_set_irq()

kvm_set_irq() has an internal buffer of three irq routing entries, allowing
connecting a GSI to three IRQ chips or on MSI.  However setup_routing_entry()
does not properly enforce this, allowing three irqchip routes followed by
an MSI route to overflow the buffer.

Fix by ensuring that an MSI entry is added to an empty list.

Signed-off-by: Avi Kivity <avi@redhat.com>