10 years agoV4L/DVB (11073): au0828: disable VBI code since it doesn't yet work
Devin Heitmueller [Wed, 11 Mar 2009 06:00:55 +0000]
V4L/DVB (11073): au0828: disable VBI code since it doesn't yet work

Since the VBI support is not yet working for the au0828, don't advertise the
capability or create the /dev/vbi device.

Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (11072): au0828: advertise only NTSC-M (as opposed to all NTSC standards)
Devin Heitmueller [Wed, 11 Mar 2009 06:00:53 +0000]
V4L/DVB (11072): au0828: advertise only NTSC-M (as opposed to all NTSC standards)

We don't now how to make any variant of NTSC work other than NTSC-M, so don't
advertise that we support the other variants.

Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (11071): tveeprom: add the xc5000 tuner to the tveeprom definition
Devin Heitmueller [Wed, 11 Mar 2009 06:00:49 +0000]
V4L/DVB (11071): tveeprom: add the xc5000 tuner to the tveeprom definition

Prior to now, we never relied on the Hauppauge tveeprom to identify which
tuner is associated with the board.  Now that the HVR-950q determines what
the tuner is based on the eeprom, set the tuner ID appropriately.

Thanks to Michael Krufky <mkrufky@linuxtv.org> for providing information on
the tveeprom organization.

Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (11070): au0828: Rework the way the analog video binding occurs
Devin Heitmueller [Wed, 11 Mar 2009 06:00:47 +0000]
V4L/DVB (11070): au0828: Rework the way the analog video binding occurs

Rework the way boards are managed so that we can change the board description
based on the Hauppauge eeprom (modeled after cx88-cards.c).

Also, make sure that we don't load the analog stack if there are no analog
inputs defined in the board profile.

Thanks to Michael Krufky <mkrufky@linuxtv.org> for providing information on
the various ways different Hauppauge boards can be configured.

Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (11069): au8522: add mutex protecting use of hybrid state
Devin Heitmueller [Wed, 11 Mar 2009 06:00:45 +0000]
V4L/DVB (11069): au8522: add mutex protecting use of hybrid state

Access using the hybrid state framework requires the list to be protected by
a mutex.

Thanks to Michael Krufky <mkrufky@linuxtv.org> for reporting this during a
code review.

Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (11068): au0828: add analog profile for the HVR-850
Devin Heitmueller [Wed, 11 Mar 2009 06:00:43 +0000]
V4L/DVB (11068): au0828: add analog profile for the HVR-850

Add the analog parameters to the device profile for the HVR-850

Thanks to Michael Krufky <mkrufky@linuxtv.org> and Steven Toth
<stoth@linuxtv.org> for providing sample hardware, engineering level support,
and testing.

Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (11067): au0828: workaround a bug in the au0828 i2c handling
Devin Heitmueller [Wed, 11 Mar 2009 06:00:41 +0000]
V4L/DVB (11067): au0828: workaround a bug in the au0828 i2c handling

There is an issue related to the i2c clock for addressing the xc5000.  The
au0828 chip does not support clock stretching, which the xc5000 makes use of.
This results in cases where we silently get back garbage in i2c read
operations.  To work around this issue until we slow down the i2c clock when
talking with that specific device.

This was not an issue before we had analog support because we never needed to
enumerate the i2c bus, and digital tuning never actually needed to perform
read operations against the xc5000.

Thanks to Michael Krufky <mkrufky@linuxtv.org> and Steven Toth
<stoth@linuxtv.org> for providing sample hardware, engineering level support,
and testing.

Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (11066): au0828: add support for analog functionality in bridge
Devin Heitmueller [Wed, 11 Mar 2009 06:00:40 +0000]
V4L/DVB (11066): au0828: add support for analog functionality in bridge

Add support for the analog functionality found in the au0828 bridge

Thanks to Michael Krufky <mkrufky@linuxtv.org> and Steven Toth
<stoth@linuxtv.org> for providing sample hardware, engineering level support,
and testing.

Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
[mchehab@redhat.com: fix compilation by adding linux/version.h]
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (11065): au8522: add support for analog side of demodulator
Devin Heitmueller [Wed, 11 Mar 2009 06:00:38 +0000]
V4L/DVB (11065): au8522: add support for analog side of demodulator

Add support for the analog functionality in the au8522 analog/digital
demodulator

Thanks to Michael Krufky <mkrufky@linuxtv.org> and Steven Toth
<stoth@linuxtv.org> for providing sample hardware, engineering level support,
and testing.

Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
[mchehab: renamed drivers/media/video/au8522_decoder.c as drivers/media/dvb/frontends/au8522_decoder.c to avoid breaking bisect]
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (11064): au8522: make use of hybrid framework so analog/digital demod can...
Devin Heitmueller [Wed, 11 Mar 2009 06:00:36 +0000]
V4L/DVB (11064): au8522: make use of hybrid framework so analog/digital demod can share state

Make use of the hybrid tuner framework so the analog and digital parts of the
au8522 demodulator can make use of the same shared state.

Thanks to Michael Krufky <mkrufky@linuxtv.org> and Steven Toth
<stoth@linuxtv.org> for providing sample hardware, engineering level support,
and testing.

Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (11063): au8522: power down the digital demod when not in use
Devin Heitmueller [Wed, 11 Mar 2009 06:00:34 +0000]
V4L/DVB (11063): au8522: power down the digital demod when not in use

When the au8522 is idle, put the chip into a low power mode (reduces power
consumption from 450ma to 346ma)

Thanks to Michael Krufky <mkrufky@linuxtv.org> and Steven Toth
<stoth@linuxtv.org> for providing sample hardware, engineering level support,
and testing.

Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (11062): au8522: fix register read/write high bits
Devin Heitmueller [Wed, 11 Mar 2009 06:00:19 +0000]
V4L/DVB (11062): au8522: fix register read/write high bits

For the i2c messages to read and write registers, the two high order bits
of the first byte dictates whether it is a read or a write operation.

Thanks to Michael Krufky <mkrufky@linuxtv.org> and Steven Toth
<stoth@linuxtv.org> for providing sample hardware, engineering level support,
and testing.

Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (11061): au8522: move shared state and common functions into a separate heade...
Devin Heitmueller [Wed, 11 Mar 2009 05:59:56 +0000]
V4L/DVB (11061): au8522: move shared state and common functions into a separate header files

Move the au8522 state structure, as well as exposing functions needed by the
analog side of the demodulator into a common header file.

Thanks to Michael Krufky <mkrufky@linuxtv.org> and Steven Toth
<stoth@linuxtv.org> for providing sample hardware, engineering level support,
and testing.

Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (11060): au8522: rename the au8522.c source file
Devin Heitmueller [Wed, 11 Mar 2009 05:59:30 +0000]
V4L/DVB (11060): au8522: rename the au8522.c source file

Rename the au8522.c file to au8522_dig.c so that more source files can be
added to the driver while preserving the original name of au8522.ko

Thanks to Michael Krufky <mkrufky@linuxtv.org> and Steven Toth
<stoth@linuxtv.org> for providing sample hardware, engineering level support,
and testing.

Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (11059): xc5000: fix bug for hybrid xc5000 devices with IF other than 5380
Devin Heitmueller [Wed, 11 Mar 2009 05:58:53 +0000]
V4L/DVB (11059): xc5000: fix bug for hybrid xc5000 devices with IF other than 5380

The xc5000 driver has a bug where the IF is always set to whatever the first
caller to dvb_attach() provides.  This fails when the device requires an IF
other than 5380 and the analog driver is loaded first through tuner-core
(which always supplies the hard-coded value of 5380).

Thanks to Michael Krufky <mkrufky@linuxtv.org> and Steven Toth
<stoth@linuxtv.org> for providing sample hardware, engineering level support,
and testing.

Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (11057): Fix CiMax stability in Netup Dual DVB-S2 CI
Abylay Ospan [Tue, 17 Mar 2009 21:21:18 +0000]
V4L/DVB (11057): Fix CiMax stability in Netup Dual DVB-S2 CI

It appears TS discontinuity about one per 10 hrs if CAM used.
Patch to fix it.

Signed-off-by: Abylay Ospan <aospan@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (11056): Bug fix in NetUP: restore high address lines in CI
Abylay Ospan [Tue, 17 Mar 2009 21:13:52 +0000]
V4L/DVB (11056): Bug fix in NetUP: restore high address lines in CI

CI high address lines disappears due to wrong data type used.
Patch to fix it.

Signed-off-by: Abylay Ospan <aospan@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (11055): Fix typo in stv0900
Igor M. Liplianin [Sun, 15 Mar 2009 10:31:45 +0000]
V4L/DVB (11055): Fix typo in stv0900

Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (11054): Shorten some lines in stv0900 to less then 81 characters
Igor M. Liplianin [Sun, 15 Mar 2009 10:28:45 +0000]
V4L/DVB (11054): Shorten some lines in stv0900 to less then 81 characters

Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (11053): saa7134: set v4l2_dev field of video_device
Hans Verkuil [Sun, 15 Mar 2009 09:53:32 +0000]
V4L/DVB (11053): saa7134: set v4l2_dev field of video_device

The v4l2_dev field of video_device wasn't initialized. The parent field
is derived from v4l2_dev, so that doesn't need to be set anymore.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (11052): bt819: remove an unused header
Hans Verkuil [Sat, 14 Mar 2009 19:34:07 +0000]
V4L/DVB (11052): bt819: remove an unused header

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (11051): v4l-dvb: replace remaining references to the old mailinglist.
Hans Verkuil [Sat, 14 Mar 2009 18:06:08 +0000]
V4L/DVB (11051): v4l-dvb: replace remaining references to the old mailinglist.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (11048): zoran: fix incorrect return type of notify function.
Hans Verkuil [Sat, 14 Mar 2009 15:53:37 +0000]
V4L/DVB (11048): zoran: fix incorrect return type of notify function.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (11047): cx88: convert to v4l2_device.
Hans Verkuil [Sat, 14 Mar 2009 15:40:51 +0000]
V4L/DVB (11047): cx88: convert to v4l2_device.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (11046): bttv: convert to v4l2_device.
Hans Verkuil [Sat, 14 Mar 2009 15:36:54 +0000]
V4L/DVB (11046): bttv: convert to v4l2_device.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (11045): v4l2: call v4l2_device_disconnect in USB drivers.
Hans Verkuil [Sat, 14 Mar 2009 15:27:01 +0000]
V4L/DVB (11045): v4l2: call v4l2_device_disconnect in USB drivers.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (11044): v4l2-device: add v4l2_device_disconnect
Hans Verkuil [Sat, 14 Mar 2009 11:28:45 +0000]
V4L/DVB (11044): v4l2-device: add v4l2_device_disconnect

Call v4l2_device_disconnect when the parent of a hotpluggable device
disconnects. This ensures that you do not have a pointer to a device that
is no longer present.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (11042): v4l2-api: Add definitions for V4L2_MPEG_STREAM_VBI_FMT_IVTV payloads
Andy Walls [Sat, 14 Mar 2009 20:06:07 +0000]
V4L/DVB (11042): v4l2-api: Add definitions for V4L2_MPEG_STREAM_VBI_FMT_IVTV payloads

This addition to the v4l2-api add definitions for the constants and
data structures used for sliced VBI data insertion into MPEG streams triggered
by V4L2_MPEG_STREAM_VBI_FMT_IVTV.  This simply declares what the ivtv and
cx18 drivers and MythTV have already been doing and provides a proper data
structure definition to user space.

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (11040): gspca - most jpeg subdrivers: Have the JPEG quality settable.
Jean-Francois Moine [Mon, 2 Mar 2009 09:40:52 +0000]
V4L/DVB (11040): gspca - most jpeg subdrivers: Have the JPEG quality settable.

The JPEG quality of the images (quantization tables) is now settable by the
VIDIOC_S_JPEGCOMP ioctl.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (11039): gspca - most jpeg subdrivers: Change the JPEG header creation.
Jean-Francois Moine [Tue, 3 Mar 2009 08:33:41 +0000]
V4L/DVB (11039): gspca - most jpeg subdrivers: Change the JPEG header creation.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (11035): mt9t031 bugfix
Philippe Rétornaz [Fri, 13 Mar 2009 12:42:32 +0000]
V4L/DVB (11035): mt9t031 bugfix

- The video device is not allocated when mt9t031_init() is called, don't use
it in debug printk.

- The clock polarity is inverted in mt9t031_set_bus_param(), use the correct
one.

Signed-off-by: Philippe Rétornaz <philippe.retornaz@epfl.ch>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (11034): soc-camera: remove now unused gpio member of struct soc_camera_link
Sascha Hauer [Fri, 13 Mar 2009 09:08:20 +0000]
V4L/DVB (11034): soc-camera: remove now unused gpio member of struct soc_camera_link

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (11033): mt9v022: allow setting of bus width from board code
Sascha Hauer [Fri, 13 Mar 2009 09:08:20 +0000]
V4L/DVB (11033): mt9v022: allow setting of bus width from board code

This patch removes the phytec specific setting of the bus width
and switches to the more generic query_bus_param/set_bus_param
hooks

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (11032): mt9m001: allow setting of bus width from board code
Sascha Hauer [Fri, 13 Mar 2009 09:08:20 +0000]
V4L/DVB (11032): mt9m001: allow setting of bus width from board code

This patch removes the phytec specific setting of the bus width
and switches to the more generic query_bus_param/set_bus_param
hooks

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (11031): pcm990 baseboard: add camera bus width switch setting
Sascha Hauer [Fri, 13 Mar 2009 09:08:20 +0000]
V4L/DVB (11031): pcm990 baseboard: add camera bus width switch setting

Some Phytec cameras have a I2C GPIO expander which allows it to
switch between different sensor bus widths. This was previously
handled in the camera driver. Since handling of this switch
varies on several boards the cameras are used on, the board
support seems a better place to handle the switch

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (11030): soc-camera: add board hook to specify the buswidth for camera sensors
Sascha Hauer [Fri, 13 Mar 2009 09:08:20 +0000]
V4L/DVB (11030): soc-camera: add board hook to specify the buswidth for camera sensors

Camera sensors have a native bus width say support, but on some
boards not all sensor data lines are connected to the image
interface and thus support a different bus width than the sensors
native one. Some boards even have a bus driver which dynamically
switches between different bus widths with a GPIO.

This patch adds a hook which board code can use to support different
bus widths.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (11029): video: use videobuf_waiton() in sh_mobile_ceu free_buffer()
Magnus Damm [Fri, 13 Mar 2009 09:08:20 +0000]
V4L/DVB (11029): video: use videobuf_waiton() in sh_mobile_ceu free_buffer()

Make sure videobuf_waiton() is used before freeing a buffer.
Without this fix we may return the buffer to the allocator
before the bus mastering operation is finished.

Reported-by: Matthieu CASTET <matthieu.castet@parrot.com>
Tested-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (11028): ov772x: use soft sleep mode in stop_capture
Kuninori Morimoto [Fri, 13 Mar 2009 09:08:20 +0000]
V4L/DVB (11028): ov772x: use soft sleep mode in stop_capture

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (11027): soc-camera: configure drivers with a default format at probe time
Guennadi Liakhovetski [Fri, 13 Mar 2009 09:08:20 +0000]
V4L/DVB (11027): soc-camera: configure drivers with a default format at probe time

Currently soc-camera doesn't set up any image format without an explicit
S_FMT. According to the API this should be supported, for example,
capture-example.c from v4l2-apps by default doesn't issue an S_FMT. This
patch moves negotiating of available host-camera format translations to
probe() time, and restores the state from the last close() on the next
open(). This is needed for some drivers, which power down or reset
hardware after the last user closes the interface. This patch also has a
nice side-effect of avoiding multiple allocation anf freeing of format
translation tables.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (11026): sh-mobile-ceu-camera: set field to the value, configured at open()
Guennadi Liakhovetski [Fri, 13 Mar 2009 09:08:20 +0000]
V4L/DVB (11026): sh-mobile-ceu-camera: set field to the value, configured at open()

For the case, that we have to capture with a default format, i.e., when the
user doesn't call S_FMT, we have to use the field value according to the
default, configured at open() time.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (11025): soc-camera: configure drivers with a default format on open
Guennadi Liakhovetski [Fri, 13 Mar 2009 09:08:20 +0000]
V4L/DVB (11025): soc-camera: configure drivers with a default format on open

Currently soc-camera doesn't set up any image format without an explicit S_FMT.
It seems this should be supported, since, for example, capture-example.c from
v4l2-apps by default doesn't issue an S_FMT. This patch configures a default
image format on open().

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (11024): soc-camera: separate S_FMT and S_CROP operations
Guennadi Liakhovetski [Fri, 13 Mar 2009 09:08:20 +0000]
V4L/DVB (11024): soc-camera: separate S_FMT and S_CROP operations

As host and camera drivers become more complex, differences between S_FMT and
S_CROP functionality grow, this patch separates them.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (11022): zoran/bt819: use new notify functionality.
Hans Verkuil [Sun, 8 Mar 2009 20:04:38 +0000]
V4L/DVB (11022): zoran/bt819: use new notify functionality.

Bt819 needs the parent driver to drive a GPIO pin low and high in order to
reset its fifo. Use the new notify callback for this.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (11021): v4l2-device: add a notify callback.
Hans Verkuil [Sun, 8 Mar 2009 20:02:10 +0000]
V4L/DVB (11021): v4l2-device: add a notify callback.

Add a notify callback to v4l2_device to let sub-devices notify their
parent of special events.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (10988): v4l2-dev: use parent field if the v4l2_device has no parent set.
Hans Verkuil [Fri, 13 Mar 2009 13:03:04 +0000]
V4L/DVB (10988): v4l2-dev: use parent field if the v4l2_device has no parent set.

Normally the parent device of v4l2_device is used as the video device
node's parent. But if it was not set, then use the parent field in the
video_device struct.

This is needed in the cx88 driver, which has one core v4l2_device but
creates multiple pci devices (one each for raw and mpeg video).

So you cannot associate the core v4l2_device with a particular PCI device,
but you can do that for each video_device.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (10987): cx23885: fix crash on non-netup cards
Hans Verkuil [Fri, 13 Mar 2009 16:24:19 +0000]
V4L/DVB (10987): cx23885: fix crash on non-netup cards

The new support for the CX23885_BOARD_NETUP_DUAL_DVBS2_CI board broke the
existing boards. Interrupts for the netup part were enabled and handled
without testing whether the current board actually had a netup -> instant
and fatal crash.

I've added tests to do this only for the CX23885_BOARD_NETUP_DUAL_DVBS2_CI
board.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Reviewed-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (10986): mr97310a: don't discard frame headers on stream output
Theodore Kilgore [Fri, 13 Mar 2009 16:04:31 +0000]
V4L/DVB (10986): mr97310a: don't discard frame headers on stream output

Fix a bug where all frame headers were being discarded, instead of being part of the
stream output, on MR97310A cameras.

The frame headers contain information which may be useful in processing
the video output and therefore should be kept and not discarded.

A corresponding patch to the decompression algorithm in
libv4lconvert/mr97310a.c corrects the change in frame offset.

Signed-off-by: Theodore Kilgore <kilgota@auburn.edu>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (10984): lgdt3305: avoid OOPS in error path of lgdt3305_attach
Michael Krufky [Thu, 12 Mar 2009 13:12:16 +0000]
V4L/DVB (10984): lgdt3305: avoid OOPS in error path of lgdt3305_attach

Setting state->frontend.demodulator_priv to NULL in the event of
a kzalloc error will result in an OOPS.  Just remove that line.

Thanks to Matthias Schwarzott for pointing this out.

Cc: Matthias Schwarzott <zzam@gentoo.org>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (10983): v4l2-common: add missing i2c_unregister_device.
Hans Verkuil [Thu, 12 Mar 2009 21:56:15 +0000]
V4L/DVB (10983): v4l2-common: add missing i2c_unregister_device.

If the i2c sub-device cannot be found, then we must unregister the i2c_client.
Otherwise this will prevent a possible probe for a different device on that same
address.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (10980): doc: improve the v4l2-framework documentation.
Hans Verkuil [Thu, 12 Mar 2009 21:34:19 +0000]
V4L/DVB (10980): doc: improve the v4l2-framework documentation.

Emphasize the need to call i2c_set_adapdata and clarify the use of the
chipid in v4l2_i2c_new_(probed_)device().

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (10908): videobuf-core: also needs a minimal subset of V4L1 header
Mauro Carvalho Chehab [Tue, 10 Mar 2009 21:30:27 +0000]
V4L/DVB (10908): videobuf-core: also needs a minimal subset of V4L1 header

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (10970): lgdt3305: add MODULE_VERSION
Michael Krufky [Wed, 11 Mar 2009 04:46:44 +0000]
V4L/DVB (10970): lgdt3305: add MODULE_VERSION

We'll start off with MODULE_VERSION("0.1")

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (10969): lgdt3305: add missing space in comment
Michael Krufky [Wed, 11 Mar 2009 04:47:53 +0000]
V4L/DVB (10969): lgdt3305: add missing space in comment

small whitespace cleanup - space missing after the *

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (10968): lgdt3305: add email address to MODULE_AUTHOR
Michael Krufky [Wed, 11 Mar 2009 04:45:44 +0000]
V4L/DVB (10968): lgdt3305: add email address to MODULE_AUTHOR

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (10965): ivtv: bump version
Hans Verkuil [Wed, 11 Mar 2009 21:50:04 +0000]
V4L/DVB (10965): ivtv: bump version

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (10962): fired-avc: fix printk formatting warning.
Hans Verkuil [Wed, 11 Mar 2009 21:29:19 +0000]
V4L/DVB (10962): fired-avc: fix printk formatting warning.

size_t should be printed with %zu.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (10961): radio-terratec: remove linux/delay.h which hadn't been used.
Alexey Klimov [Wed, 11 Mar 2009 10:37:04 +0000]
V4L/DVB (10961): radio-terratec: remove linux/delay.h which hadn't been used.

Signed-off-by: Alexey Klimov <klimov.linux@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (10960): omap24xxcam: don't set vfl_type.
Hans Verkuil [Wed, 11 Mar 2009 07:34:09 +0000]
V4L/DVB (10960): omap24xxcam: don't set vfl_type.

The vfl_type field is set by the core, so anything you fill in here will
be overwritten. And it will be set to a VFL_TYPE_ value, not a VID_TYPE_
value which is an obsolete V4L1 type.

Since these V4L1 types have been made unavailable for V4L2 drivers, this
driver stopped compiling.

In this case the fix is just removing this assignment.

Cc: Sakari Ailus <sakari.ailus@nokia.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (10959): radio: remove uaccess include
Hans Verkuil [Wed, 11 Mar 2009 07:25:47 +0000]
V4L/DVB (10959): radio: remove uaccess include

This include isn't needed and so can be removed.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (10951): xc5000: Fix CodingStyle errors introduced by the last patch
Mauro Carvalho Chehab [Tue, 3 Mar 2009 17:35:41 +0000]
V4L/DVB (10951): xc5000: Fix CodingStyle errors introduced by the last patch

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (10950): xc5000: prepare it to be used by cx231xx module
Sri Deevi [Tue, 3 Mar 2009 09:07:42 +0000]
V4L/DVB (10950): xc5000: prepare it to be used by cx231xx module

Signed-off-by: Srinivasa Deevi <srinivasa.deevi@conexant.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (10949): Add support for Terratec Cinergy HT PCI MKII
Stephan Wienczny [Tue, 10 Mar 2009 22:08:06 +0000]
V4L/DVB (10949): Add support for Terratec Cinergy HT PCI MKII

This patch adds support for Terratec Cinergy HT PCI MKII with card id 79.
Its more or less a copy of Pinnacle Hybrid PCTV.
Thanks to k1ngf1sher on forum.ubuntuusers.de for the idea to copy that card.

Signed-off-by: Stephan Wienczny <stephan@wienczny.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (10948): flexcop-pci: Print a message in case the new stream watchdog detects...
Matthias Schwarzott [Tue, 10 Mar 2009 16:55:14 +0000]
V4L/DVB (10948): flexcop-pci: Print a message in case the new stream watchdog detects a problem

Print a message in case the new software IRQ watchdog detects a problem.
I choose the info message category, this can be changed if not appropriate.

Cc: Patrick Boettcher <patrick.boettcher@desy.de>
Signed-off-by: Matthias Schwarzott <zzam@gentoo.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (10947): Auto-load videodev module when device opened.
Scott James Remnant [Mon, 2 Mar 2009 18:40:57 +0000]
V4L/DVB (10947): Auto-load videodev module when device opened.

The videodev module is missing the char-major-81-* alias that would
cause it to be auto-loaded when a device of that type is opened.  This
patch adds the alias.

Signed-off-by: Scott James Remnant <scott@canonical.com>
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (10946): radio-rtrack2: fix double mutex_unlock
Alexey Klimov [Tue, 10 Mar 2009 08:14:00 +0000]
V4L/DVB (10946): radio-rtrack2: fix double mutex_unlock

Patch fixes double mutex unlocking.

Signed-off-by: Alexey Klimov <klimov.linux@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (10945): pwc : fix LED and power setup for first open
Martin Fuzzey [Mon, 9 Mar 2009 23:16:00 +0000]
V4L/DVB (10945): pwc : fix LED and power setup for first open

Call pwc_construct before trying to talk to device to obtain vc interface so
that LED and power setup works the first time the video device is opened.

Signed-off-by: Martin Fuzzey <mfuzzey@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (10944): Conceptronic CTVFMI2 PCI Id
Robert Millan [Wed, 11 Mar 2009 11:18:53 +0000]
V4L/DVB (10944): Conceptronic CTVFMI2 PCI Id

My BTTV_BOARD_CONCEPTRONIC_CTVFMI2 card wasn't auto-detected, here's a patch
that adds its PCI id.

lspci -nnv output:

05:06.0 Multimedia video controller [0400]: Brooktree Corporation Bt878 Video Capture [109e:036e] (rev 11)
05:06.1 Multimedia controller [0480]: Brooktree Corporation Bt878 Audio Capture [109e:0878] (rev 11)

Press <break> within 3 seconds if this is wrong.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (10943): cx88: Prevent general protection fault on rmmod
Jean Delvare [Sat, 7 Mar 2009 10:42:12 +0000]
V4L/DVB (10943): cx88: Prevent general protection fault on rmmod

When unloading the cx8800 driver I sometimes get a general protection
fault. Analysis revealed a race in cx88_ir_stop(). It can be solved by
using a delayed work instead of a timer for infrared input polling.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (10940): saa6588: Prevent general protection fault on rmmod
Jean Delvare [Sat, 7 Mar 2009 10:44:12 +0000]
V4L/DVB (10940): saa6588: Prevent general protection fault on rmmod

The removal of the timer which polls the infrared input is racy.
Replacing the timer with a delayed work solves the problem.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (10939): ir-kbd-i2c: Prevent general protection fault on rmmod
Jean Delvare [Sat, 7 Mar 2009 10:43:43 +0000]
V4L/DVB (10939): ir-kbd-i2c: Prevent general protection fault on rmmod

The removal of the timer which polls the infrared input is racy.
Replacing the timer with a delayed work solves the problem.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (10938): em28xx: Prevent general protection fault on rmmod
Jean Delvare [Sat, 7 Mar 2009 10:43:01 +0000]
V4L/DVB (10938): em28xx: Prevent general protection fault on rmmod

The removal of the timer which polls the infrared input is racy.
Replacing the timer with a delayed work solves the problem.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (10934): zoran: replace functions names in strings with __func__
Trent Piepho [Wed, 11 Mar 2009 02:28:33 +0000]
V4L/DVB (10934): zoran: replace functions names in strings with __func__

It reduces the size of the driver over all, and the function names in
strings need to be manually kept up to date while __func__ doesn't.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (10933): zoran: Pass zoran_fh pointers instead of file pointers
Trent Piepho [Wed, 11 Mar 2009 02:28:31 +0000]
V4L/DVB (10933): zoran: Pass zoran_fh pointers instead of file pointers

Many functions had a struct file pointer argument, but all they wants is
the struct zoran_fh pointer from the file's private data.  Since every
caller of those functions already has the zoran_fh, just pass the that
instead.  This saves a dereference in each function change.

While I'm at it, change the code formatting of affected functions to be
kernel standard style.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (10932): zoran: Don't frighten users with failed buffer allocation
Jean Delvare [Wed, 11 Mar 2009 02:28:20 +0000]
V4L/DVB (10932): zoran: Don't frighten users with failed buffer allocation

kmalloc() can fail for large video buffers. By default the kernel
complains loudly about allocation failures, but we don't want to
frighten the user, so ask kmalloc() to keep quiet on such failures.

Cc: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (10931): zoran: Drop the lock_norm module parameter
Jean Delvare [Wed, 11 Mar 2009 02:28:17 +0000]
V4L/DVB (10931): zoran: Drop the lock_norm module parameter

The lock_norm module parameter doesn't look terribly useful. If you
don't want to change the norm, just don't change it. As a matter of
fact, no other v4l driver has such a parameter.

Cc: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (10930): zoran: Unify buffer descriptors
Trent Piepho [Wed, 11 Mar 2009 02:28:16 +0000]
V4L/DVB (10930): zoran: Unify buffer descriptors

The zoran driver had two kinds of buffer descriptors, one for jpg buffers
and one for raw buffers.  They were mostly the same with only a couple

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (10927): dib0700: add support for Hauppauge ATSC MiniCard
Michael Krufky [Mon, 19 Jan 2009 04:12:55 +0000]
V4L/DVB (10927): dib0700: add support for Hauppauge ATSC MiniCard

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (10926): saa7134: enable digital tv support for Hauppauge WinTV-HVR1120
Michael Krufky [Mon, 19 Jan 2009 04:10:49 +0000]
V4L/DVB (10926): saa7134: enable digital tv support for Hauppauge WinTV-HVR1120

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (10925): add support for LG Electronics LGDT3305 ATSC/QAM-B Demodulator
Michael Krufky [Tue, 13 Jan 2009 07:40:36 +0000]
V4L/DVB (10925): add support for LG Electronics LGDT3305 ATSC/QAM-B Demodulator

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (10924): saa7134: enable serial transport streaming interface
Michael Krufky [Tue, 13 Jan 2009 07:03:26 +0000]
V4L/DVB (10924): saa7134: enable serial transport streaming interface

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (10923): saa7134: fix typo in product name
Michael Krufky [Tue, 10 Mar 2009 20:02:07 +0000]
V4L/DVB (10923): saa7134: fix typo in product name

replace occurances of "HVR1150" with "HVR1120" - this was a typo.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (10921): msp3400: remove obsolete V4L1 code
Hans Verkuil [Tue, 10 Mar 2009 13:42:44 +0000]
V4L/DVB (10921): msp3400: remove obsolete V4L1 code

There are no drivers left that call msp3400 with V4L1 commands. Remove it
from this driver.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (10920): v4l2-ioctl: fix partial-copy code.
Hans Verkuil [Sun, 8 Mar 2009 13:35:23 +0000]
V4L/DVB (10920): v4l2-ioctl: fix partial-copy code.

The code to optimize the usercopy only checked the ioctl NR field. However,
this code is also called for non-V4L2 ioctls (either private or ioctls from
linux/dvb/audio.h and linux/dvb/video.h for decoder drivers like ivtv).

If such an ioctl has the same NR as a V4L2 ioctl, then disaster strikes.

Modified the code to check on the full command ID.

Thanks to Martin Dauskardt for tracing the ivtv breakage to this particular
change.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (10919): tlv320aic23b: use v4l2-i2c-drv.h instead of drv-legacy.h
Hans Verkuil [Sat, 7 Mar 2009 16:10:43 +0000]
V4L/DVB (10919): tlv320aic23b: use v4l2-i2c-drv.h instead of drv-legacy.h

This driver isn't used in any legacy mode, so no need for v4l2-i2c-drv-legacy.h.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (10914): v4l2: fix compile warnings when printing u64 value.
Hans Verkuil [Fri, 6 Mar 2009 13:15:01 +0000]
V4L/DVB (10914): v4l2: fix compile warnings when printing u64 value.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (10912): vivi: fix compile warning.
Hans Verkuil [Fri, 6 Mar 2009 12:58:12 +0000]
V4L/DVB (10912): vivi: fix compile warning.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (10910): videodev2.h: remove deprecated VIDIOC_G_CHIP_IDENT_OLD
Hans Verkuil [Fri, 6 Mar 2009 12:55:42 +0000]
V4L/DVB (10910): videodev2.h: remove deprecated VIDIOC_G_CHIP_IDENT_OLD

As announced VIDIOC_G_CHIP_IDENT_OLD is now removed for 2.6.30.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (10909): tvmixer: remove last remaining references to this deleted module.
Hans Verkuil [Fri, 6 Mar 2009 12:29:09 +0000]
V4L/DVB (10909): tvmixer: remove last remaining references to this deleted module.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (10907): avoid loading the entire videodev.h header on V4L2 drivers
Mauro Carvalho Chehab [Tue, 10 Mar 2009 08:31:34 +0000]
V4L/DVB (10907): avoid loading the entire videodev.h header on V4L2 drivers

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (10870a): remove all references for video_decoder.h
Mauro Carvalho Chehab [Tue, 10 Mar 2009 08:02:28 +0000]
V4L/DVB (10870a): remove all references for video_decoder.h

changeset 04934e44e3784a1b969582e2d59afcec278470c6 removed the last implementation
that were still using the V4L1 obsoleted header.
Now, video_decoder.h is not used anymore by any driver.

Let's remove it and all references for it in Kernel.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (10905): dib0700: enable DVB_FE_CUSTOMISE for dibcom frontends
Michael Krufky [Tue, 10 Mar 2009 04:21:14 +0000]
V4L/DVB (10905): dib0700: enable DVB_FE_CUSTOMISE for dibcom frontends

There was never any build-time dependency of the dib0700 usb module on the
dib0070 tuner module. Now that the build-time dependencies of dib0700 on
dib3000mc, dib7000p and dib7000m have been removed in the previous changesets,
we can enable DVB_FE_CUSTOMISE for these modules under config DVB_USB_DIB0700

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (10904): remove dib0070_ctrl_agc_filter from dib0070.h
Michael Krufky [Mon, 9 Mar 2009 05:39:58 +0000]
V4L/DVB (10904): remove dib0070_ctrl_agc_filter from dib0070.h

This function prototype is defined but the function itself does not exist.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (10903): cleanup linewraps in dib3000mc.h
Michael Krufky [Tue, 10 Mar 2009 03:53:57 +0000]
V4L/DVB (10903): cleanup linewraps in dib3000mc.h

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (10902): cleanup linewraps in dib7000m.h
Michael Krufky [Mon, 9 Mar 2009 05:37:55 +0000]
V4L/DVB (10902): cleanup linewraps in dib7000m.h

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (10901): cleanup linewraps in dib7000p.h
Michael Krufky [Mon, 9 Mar 2009 05:29:01 +0000]
V4L/DVB (10901): cleanup linewraps in dib7000p.h

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (10900): remove build-time dependencies on dib3000mc
Michael Krufky [Mon, 9 Mar 2009 03:59:09 +0000]
V4L/DVB (10900): remove build-time dependencies on dib3000mc

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (10899): remove build-time dependencies on dib7000p
Michael Krufky [Mon, 9 Mar 2009 03:04:17 +0000]
V4L/DVB (10899): remove build-time dependencies on dib7000p

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (10898): remove build-time dependencies on dib7000m
Michael Krufky [Mon, 9 Mar 2009 03:03:25 +0000]
V4L/DVB (10898): remove build-time dependencies on dib7000m

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (10897): Fix Kbuild MEDIA_TUNER_CUSTOMIZE dependencies
Mauro Carvalho Chehab [Tue, 10 Mar 2009 05:30:23 +0000]
V4L/DVB (10897): Fix Kbuild MEDIA_TUNER_CUSTOMIZE dependencies

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB (10896): /frontends/Kconfig: Move af9013 Kconfig option to its proper place
Mauro Carvalho Chehab [Tue, 10 Mar 2009 03:49:58 +0000]
V4L/DVB (10896): /frontends/Kconfig: Move af9013 Kconfig option to its proper place

af9013 is not a development tool. It is, instead, a DVB-T module.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>