10 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
Linus Torvalds [Sat, 29 May 2010 22:31:57 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (26 commits)
  ALSA: snd-usb-caiaq: Bump version number to 1.3.21
  ALSA: Revert "ALSA: snd-usb-caiaq: Set default input mode of A4DJ"
  ALSA: snd-usb-caiaq: Simplify single case to an 'if'
  ALSA: snd-usb-caiaq: Restore 'Control vinyl' input mode on A4DJ
  ALSA: hda: Use LPIB for a Shuttle device
  ALSA: hda: Add support for another Lenovo ThinkPad Edge in conexant codec
  ALSA: hda: Use LPIB for Sony VPCS11V9E
  ALSA: usb-audio: fix feature unit parser for UAC2
  ALSA: asihpi - Minor code cleanup
  ALSA: asihpi - Add support for new ASI8800 family
  ALSA: asihpi - Fix bug preventing outstream_write preload from happening
  ALSA: asihpi - Fix imbalanced lock path in hw_message
  ALSA: asihpi - Remove support for old ASI8800 family
  ALSA: asihpi - Add hd radio blend functions
  ALSA: asihpi - Remove unused io map functions
  ALSA: usb-audio: add support for UAC2 pitch control
  ALSA: usb-audio: parse UAC2 endpoint descriptors correctly
  ALSA: usb-audio: fix return values
  ALSA: usb-audio: parse more format descriptors with structs
  sound: Add missing spin_unlock
  ...

10 years agoMerge branch 'fix/hda' into for-linus
Takashi Iwai [Sat, 29 May 2010 19:50:36 +0000]
Merge branch 'fix/hda' into for-linus

10 years agoMerge branch 'fix/misc' into for-linus
Takashi Iwai [Sat, 29 May 2010 19:50:33 +0000]
Merge branch 'fix/misc' into for-linus

10 years agoMerge branch 'fix/asoc' into for-linus
Takashi Iwai [Sat, 29 May 2010 19:50:27 +0000]
Merge branch 'fix/asoc' into for-linus

10 years agoALSA: snd-usb-caiaq: Bump version number to 1.3.21
Mark Hills [Sat, 29 May 2010 15:53:26 +0000]
ALSA: snd-usb-caiaq: Bump version number to 1.3.21

Acked-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Mark Hills <mark@pogo.org.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

10 years agoALSA: Revert "ALSA: snd-usb-caiaq: Set default input mode of A4DJ"
Mark Hills [Sat, 29 May 2010 15:53:25 +0000]
ALSA: Revert "ALSA: snd-usb-caiaq: Set default input mode of A4DJ"

Do not explicity set the default input mode. Use the hardware default
of mode 0 ('Control vinyl'), which is now available.

This reverts commit e3ca4c9.

Acked-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Mark Hills <mark@pogo.org.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

10 years agoALSA: snd-usb-caiaq: Simplify single case to an 'if'
Mark Hills [Sat, 29 May 2010 15:53:24 +0000]
ALSA: snd-usb-caiaq: Simplify single case to an 'if'

After removing code, only one case remains. So use an 'if' instead.

Acked-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Mark Hills <mark@pogo.org.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

10 years agoALSA: snd-usb-caiaq: Restore 'Control vinyl' input mode on A4DJ
Mark Hills [Sat, 29 May 2010 15:53:23 +0000]
ALSA: snd-usb-caiaq: Restore 'Control vinyl' input mode on A4DJ

This feature was undocumented on early A4DJ units. It is indicated
by lighting both the 'line' and 'phono' lamps at the same time.
Newer units document this and the newer Windows drivers enable this
for all units, so restore the functionality.

This patch simplifies the code and changes the mode mapping to match
the A8DJ, favouring simpler code and consistency over keeping the
existing mapping.

Both 'Control vinyl' and 'Phono' input modes enable the hardware
preamp. The difference is the input impedance.

This reverts commit 9a9527e.

Acked-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Mark Hills <mark@pogo.org.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

10 years agoALSA: hda: Use LPIB for a Shuttle device
Daniel T Chen [Sat, 29 May 2010 15:04:11 +0000]
ALSA: hda: Use LPIB for a Shuttle device

BugLink: https://launchpad.net/bugs/551949

Symptom: On the reporter's Shuttle device, using PulseAudio in Ubuntu
10.04 LTS results in "popping clicking" audio with the PA crashing
shortly thereafter.

Test case: Using Ubuntu 10.04 LTS (Linux 2.6.32.12), Linux 2.6.33, or
Linux 2.6.34, adjust the HDA device's volume with PulseAudio.

Resolution: add SSID for this machine to the position_fix quirk table,
explicitly specifying the LPIB method.

Reported-and-Tested-By: Christian Mehlis <mehlis@inf.fu-berlin.de>
Cc: <stable@kernel.org>
Signed-off-by: Daniel T Chen <crimsun@ubuntu.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

10 years agoMerge branch 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied...
Linus Torvalds [Fri, 28 May 2010 23:14:40 +0000]
Merge branch 'drm-linus' of git://git./linux/kernel/git/airlied/drm-2.6

* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/radeon: fix the r100/r200 ums block 0 page fix

10 years agoMerge branch 'idle-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb...
Linus Torvalds [Fri, 28 May 2010 23:14:17 +0000]
Merge branch 'idle-release' of git://git./linux/kernel/git/lenb/linux-idle-2.6

* 'idle-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6:
  intel_idle: native hardware cpuidle driver for latest Intel processors
  ACPI: acpi_idle: touch TS_POLLING only in the non-MWAIT case
  acpi_pad: uses MONITOR/MWAIT, so it doesn't need to clear TS_POLLING
  sched: clarify commment for TS_POLLING
  ACPI: allow a native cpuidle driver to displace ACPI
  cpuidle: make cpuidle_curr_driver static
  cpuidle: add cpuidle_unregister_driver() error check
  cpuidle: fail to register if !CONFIG_CPU_IDLE

10 years agoMerge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux...
Linus Torvalds [Fri, 28 May 2010 21:42:18 +0000]
Merge branch 'release' of git://git./linux/kernel/git/lenb/linux-acpi-2.6

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (27 commits)
  ACPI: Don't let acpi_pad needlessly mark TSC unstable
  drivers/acpi/sleep.h: Checkpatch cleanup
  ACPI: Minor cleanup eliminating redundant PMTIMER_TICKS to NS conversion
  ACPI: delete unused c-state promotion/demotion data strucutures
  ACPI: video: fix acpi_backlight=video
  ACPI: EC: Use kmemdup
  drivers/acpi: use kasprintf
  ACPI, APEI, EINJ injection parameters support
  Add x64 support to debugfs
  ACPI, APEI, Use ERST for persistent storage of MCE
  ACPI, APEI, Error Record Serialization Table (ERST) support
  ACPI, APEI, Generic Hardware Error Source memory error support
  ACPI, APEI, UEFI Common Platform Error Record (CPER) header
  Unified UUID/GUID definition
  ACPI Hardware Error Device (PNP0C33) support
  ACPI, APEI, PCIE AER, use general HEST table parsing in AER firmware_first setup
  ACPI, APEI, Document for APEI
  ACPI, APEI, EINJ support
  ACPI, APEI, HEST table parsing
  ACPI, APEI, APEI supporting infrastructure
  ...

10 years agodrm/radeon: fix the r100/r200 ums block 0 page fix
Dave Airlie [Fri, 28 May 2010 20:50:37 +0000]
drm/radeon: fix the r100/r200 ums block 0 page fix

airlied -> brown paper bag.

I blame Hi-5 or the Wiggles for lowering my IQ, move the fix inside some
brackets instead of breaking everything in site.

Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

10 years agoMerge branch 'ht-delete-2.6.35' into release
Len Brown [Fri, 28 May 2010 20:20:35 +0000]
Merge branch 'ht-delete-2.6.35' into release

10 years agoMerge branch 'misc-2.6.35' into release
Len Brown [Fri, 28 May 2010 20:18:20 +0000]
Merge branch 'misc-2.6.35' into release

10 years agoMerge branches 'video' and 'video-edid' into release
Len Brown [Fri, 28 May 2010 20:18:12 +0000]
Merge branches 'video' and 'video-edid' into release

10 years agoMerge branch 'acpi_enable' into release
Len Brown [Fri, 28 May 2010 20:17:27 +0000]
Merge branch 'acpi_enable' into release

10 years agoMerge branch 'bjorn-pci-root-v4-2.6.35' into release
Len Brown [Fri, 28 May 2010 20:17:16 +0000]
Merge branch 'bjorn-pci-root-v4-2.6.35' into release

10 years agoACPI: Don't let acpi_pad needlessly mark TSC unstable
Venkatesh Pallipadi [Tue, 18 May 2010 21:39:16 +0000]
ACPI: Don't let acpi_pad needlessly mark TSC unstable

acpi pad driver kind of aggressively marks TSC as unstable at init
time, on mwait capable and non X86_FEATURE_NONSTOP_TSC systems. This is
irrespective of whether pad driver is ever going to be used on the
system or deep C-states are supported/used. This will affect every user
who just happens to compile in (or get a kernel version which
compiles in) acpi pad driver.

Move mark_tsc_unstable() out of init to the actual idle invocation path
of the pad driver.

There is also another bug/missing_feature in the code that it does not
support 'always running apic timer' and switches to broadcast mode
unconditionally. Shaohua, can you take a look at that please.

Signed-off-by: Venkatesh Pallipadi <venki@google.com>
Signed-off-by: Len Brown <len.brown@intel.com>

10 years agodrivers/acpi/sleep.h: Checkpatch cleanup
Andrea Gelmini [Sat, 27 Feb 2010 16:51:42 +0000]
drivers/acpi/sleep.h: Checkpatch cleanup

drivers/acpi/sleep.h:3: WARNING: space prohibited between function name and open parenthesis '('

Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Len Brown <len.brown@intel.com>

10 years agoACPI: Minor cleanup eliminating redundant PMTIMER_TICKS to NS conversion
Venkatesh Pallipadi [Thu, 22 Apr 2010 23:48:33 +0000]
ACPI: Minor cleanup eliminating redundant PMTIMER_TICKS to NS conversion

acpi_enter_[simple,bm] does
idle timing in ns, convert it to timeval, then to us, then to
pmtimer_ticks and then back to ns.

This patch changes things to
idle timing in ns, convert it to us, and then to pmtimer_ticks.

Just saves an imul along this path, but makes the code cleaner.

Signed-off-by: Venkatesh Pallipadi <venki@google.com>
Signed-off-by: Len Brown <len.brown@intel.com>

10 years agointel_idle: native hardware cpuidle driver for latest Intel processors
Len Brown [Mon, 8 Mar 2010 19:07:30 +0000]
intel_idle: native hardware cpuidle driver for latest Intel processors

This EXPERIMENTAL driver supersedes acpi_idle on
Intel Atom Processors, Intel Core i3/i5/i7 Processors
and associated Intel Xeon processors.

It does not support the Intel Core2 processor or earlier.

For kernels configured with ACPI, CONFIG_INTEL_IDLE=y
allows intel_idle to probe before the ACPI processor driver.
Booting with "intel_idle.max_cstate=0" disables intel_idle
and the system will fall back on ACPI's "acpi_idle".

Typical Linux distributions load ACPI processor module early,
making CONFIG_INTEL_IDLE=m not easily useful on ACPI platforms.

intel_idle probes all processors at module_init time.
Processors that are hot-added later will be limited
to using C1 in idle.

Signed-off-by: Len Brown <len.brown@intel.com>

10 years agoACPI: acpi_idle: touch TS_POLLING only in the non-MWAIT case
Len Brown [Mon, 24 May 2010 18:27:44 +0000]
ACPI: acpi_idle: touch TS_POLLING only in the non-MWAIT case

commit d306ebc28649b89877a22158fe0076f06cc46f60
(ACPI: Be in TS_POLLING state during mwait based C-state entry)
fixed an important power & performance issue where ACPI c2 and c3 C-states
were clearing TS_POLLING even when using MWAIT (ACPI_STATE_FFH).
That bug had been causing us to receive redundant scheduling interrups
when we had already been woken up by MONITOR/MWAIT.

Following up on that...

In the MWAIT case, we don't have to subsequently
check need_resched(), as that c heck was there
for the TS_POLLING-clearing case.

Note that not only does the cpuidle calling function
already check need_resched() before calling us, the
low-level entry into monitor/mwait calls it twice --
guaranteeing that a write to the trigger address
can not go un-noticed.

Also, in this case, we don't have to set TS_POLLING
when we wake, because we never cleared it.

Signed-off-by: Len Brown <len.brown@intel.com>
Acked-by: Venkatesh Pallipadi <venki@google.com>

10 years agoMerge branch 'for-linus' of git://git.o-hand.com/linux-rpurdie-leds
Linus Torvalds [Fri, 28 May 2010 17:20:59 +0000]
Merge branch 'for-linus' of git://git.o-hand.com/linux-rpurdie-leds

* 'for-linus' of git://git.o-hand.com/linux-rpurdie-leds:
  leds: Fix leds-gpio openfirmware compile issue
  leds: Kconfig fixes

10 years agotracing: fix for tracepoint API change
Stephen Rothwell [Fri, 28 May 2010 05:05:00 +0000]
tracing: fix for tracepoint API change

Commit 38516ab59fbc5b3bb278cf5e1fe2867c70cff32e ("tracing: Let
tracepoints have data passed to tracepoint callbacks") requires this
fixup to the powerpc code.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoMerge branch 'for-linus/2635-updates' of git://git.fluff.org/bjdooks/linux
Linus Torvalds [Fri, 28 May 2010 17:19:03 +0000]
Merge branch 'for-linus/2635-updates' of git://git.fluff.org/bjdooks/linux

* 'for-linus/2635-updates' of git://git.fluff.org/bjdooks/linux:
  ARM: S5PV210: serial: Fix section mismatch warning
  ARM: s3c2410_defconfig: Add new machines
  ARM: s3c6400_defconfig: Add framebuffer and basic LCD
  ARM: s3c6400_defconfig: Add RTC driver support
  ARM: s3c6400_defconfig: Enable USB host side
  ARM: s3c6400_defconfig: Add SPI driver
  ARM: s3c6400_defconfig: Update compiled machines
  ARM: S5P: Regoster clk_xusbxti clock for hsotg driver
  ARM: S3C64XX: Add USB OTG HCLK to the list of clocks
  ARM: SAMSUNG: gpio-cfg.h: update documentation
  ARM: SAMSUNG: Documentation: add documentation on GPIO code
  ARM: SAMSUNG: Fix documentation for s3c_gpio_cfgpin()
  ARM: S3C24XX: Documentation: add section on gpiolib changes
  ARM: S3C24XX: Documentation: update GPIO documentation
  ARM: S3C24XX: Documentation: update documentation overview
  ARM: SAMSUNG: Documentation: update directory layout
  ARM: SAMSUNG: Documentation: update the list of SoCs supported

10 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Fri, 28 May 2010 17:18:40 +0000]
Merge git://git./linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (22 commits)
  netlink: bug fix: wrong size was calculated for vfinfo list blob
  netlink: bug fix: don't overrun skbs on vf_port dump
  xt_tee: use skb_dst_drop()
  netdev/fec: fix ifconfig eth0 down hang issue
  cnic: Fix context memory init. on 5709.
  drivers/net: Eliminate a NULL pointer dereference
  drivers/net/hamradio: Eliminate a NULL pointer dereference
  be2net: Patch removes redundant while statement in loop.
  ipv6: Add GSO support on forwarding path
  net: fix __neigh_event_send()
  vhost: fix the memory leak which will happen when memory_access_ok fails
  vhost-net: fix to check the return value of copy_to/from_user() correctly
  vhost: fix to check the return value of copy_to/from_user() correctly
  vhost: Fix host panic if ioctl called with wrong index
  net: fix lock_sock_bh/unlock_sock_bh
  net/iucv: Add missing spin_unlock
  net: ll_temac: fix checksum offload logic
  net: ll_temac: fix interrupt bug when interrupt 0 is used
  sctp: dubious bitfields in sctp_transport
  ipmr: off by one in __ipmr_fill_mroute()
  ...

10 years agoFRV: ARCH_KMALLOC_MINALIGN was already defined
David Howells [Fri, 28 May 2010 09:41:16 +0000]
FRV: ARCH_KMALLOC_MINALIGN was already defined

ARCH_KMALLOC_MINALIGN was already defined in asm/mem-layout.h and so shouldn't
have been added to asm/cache.h as well, but rather altered in place.

The commit that added it to asm/cache.h was:

commit 69dcf3db03626c4f18de624e8632454ea12ff260
Author: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date:   Mon May 24 14:32:54 2010 -0700

    frv: set ARCH_KMALLOC_MINALIGN

    Architectures that handle DMA-non-coherent memory need to set
    ARCH_KMALLOC_MINALIGN to make sure that kmalloc'ed buffer is
    DMA-safe: the buffer doesn't share a cache with the others.

Signed-off-by: David Howells <dhowells@redhat.com>
cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoMerge branch 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 28 May 2010 17:16:27 +0000]
Merge branch 'timers-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  posix_timer: Fix error path in timer_create
  hrtimer: Avoid double seqlock
  timers: Move local variable into else section
  timers: Fix slack calculation really

10 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
Linus Torvalds [Fri, 28 May 2010 17:07:48 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
  remove detritus left by "mm: make read_cache_page synchronous"
  fix fs/sysv s_dirt handling
  fat: convert to use the new truncate convention.
  ext2: convert to use the new truncate convention.
  tmpfs: convert to use the new truncate convention
  fs: convert simple fs to new truncate
  kill spurious reference to vmtruncate
  fs: introduce new truncate sequence
  fs/super: fix kernel-doc warning
  fs/minix: bugfix, number of indirect block ptrs per block depends on block size
  rename the generic fsync implementations
  drop unused dentry argument to ->fsync
  fs: Add missing mutex_unlock
  Fix racy use of anon_inode_getfd() in perf_event.c
  get rid of the magic around f_count in aio
  VFS: fix recent breakage of FS_REVAL_DOT
  Revert "anon_inode: set S_IFREG on the anon_inode"

10 years agoremove detritus left by "mm: make read_cache_page synchronous"
Al Viro [Fri, 28 May 2010 15:34:50 +0000]
remove detritus left by "mm: make read_cache_page synchronous"

gets minix get_dir_page() in sync with its analogs; back in 2007
Nick has switched read_cache_page() and friends to sync behaviour
(i.e.  they wait for the page to get unlocked, check if it's uptodate
and if it isn't return ERR_PTR(-EIO) instead) and removed the
duplicate logics from the callers.  In case of fs/minix/dir.c he'd
removed only half of that...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

10 years agonetlink: bug fix: wrong size was calculated for vfinfo list blob
Scott Feldman [Fri, 28 May 2010 10:42:43 +0000]
netlink: bug fix: wrong size was calculated for vfinfo list blob

The wrong size was being calculated for vfinfo.  In one case, it was over-
calculating using nlmsg_total_size on attrs, in another case, it was
under-calculating by assuming ifla_vf_* structs are packed together, but
each struct is it's own attr w/ hdr (and padding).

Signed-off-by: Scott Feldman <scofeldm@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

10 years agonetlink: bug fix: don't overrun skbs on vf_port dump
Scott Feldman [Fri, 28 May 2010 10:42:18 +0000]
netlink: bug fix: don't overrun skbs on vf_port dump

Noticed by Patrick McHardy: was continuing to fill skb after a
nla_put_failure, ignoring the size calculated by upper layer.  Now,
return -EMSGSIZE on any overruns, but also allow netdev to
fail ndo_get_vf_port with error other than -EMSGSIZE, thus unwinding
nest.

Signed-off-by: Scott Feldman <scofeldm@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

10 years agoxt_tee: use skb_dst_drop()
Eric Dumazet [Fri, 28 May 2010 10:41:17 +0000]
xt_tee: use skb_dst_drop()

After commit 7fee226a (net: add a noref bit on skb dst), its wrong to
use : dst_release(skb_dst(skb)), since we could decrement a refcount
while skb dst was not refcounted.

We should use skb_dst_drop(skb) instead.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

10 years agonetdev/fec: fix ifconfig eth0 down hang issue
Bryan Wu [Fri, 28 May 2010 10:40:39 +0000]
netdev/fec: fix ifconfig eth0 down hang issue

BugLink: http://bugs.launchpad.net/bugs/559065

In fec open/close function, we need to use phy_connect and phy_disconnect
operation before we start/stop phy. Otherwise it will cause system hang.

Only call fec_enet_mii_probe() in open function, because the first open
action will cause NULL pointer error.

Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

10 years agoARM: S5PV210: serial: Fix section mismatch warning
Marek Szyprowski [Fri, 28 May 2010 10:21:11 +0000]
ARM: S5PV210: serial: Fix section mismatch warning

Rename the structure to avoid the following warning:

WARNING: drivers/serial/built-in.o(.data+0x534): Section mismatch in reference from the variable s5p_serial_drv to the function .devexit.text:s3c24xx_serial_remove()
The variable s5p_serial_drv references
the function __devexit s3c24xx_serial_remove()
If the reference is valid then annotate the
variable with __exit* (see linux/init.h) or name the variable:
*driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console,

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

10 years agoARM: Merge for-2635/defconfig3
Ben Dooks [Fri, 28 May 2010 10:34:02 +0000]
ARM: Merge for-2635/defconfig3

Merge branch 'for-2635/defconfig3' into for-linus/2635-updates

10 years agoARM: s3c2410_defconfig: Add new machines
Ben Dooks [Fri, 28 May 2010 10:28:06 +0000]
ARM: s3c2410_defconfig: Add new machines

Add the SMDK2416, and the GTA02 to the list of machines
that are included in the s3c2410_defconfig.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>

10 years agoARM: s3c6400_defconfig: Add framebuffer and basic LCD
Ben Dooks [Fri, 28 May 2010 09:42:35 +0000]
ARM: s3c6400_defconfig: Add framebuffer and basic LCD

Add the framebuffer driver and some basic LCD configurations
that should be suitable for the SMDK boards.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>

10 years agoARM: s3c6400_defconfig: Add RTC driver support
Ben Dooks [Fri, 28 May 2010 09:39:10 +0000]
ARM: s3c6400_defconfig: Add RTC driver support

Now that the RTC driver supports the S3C64XX, enable
it in the build.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>

10 years agoARM: s3c6400_defconfig: Enable USB host side
Ben Dooks [Fri, 28 May 2010 09:36:25 +0000]
ARM: s3c6400_defconfig: Enable USB host side

Enable the USB Host side by adding the USB OHCI and
some basic USB driver modules.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>

10 years agoARM: s3c6400_defconfig: Add SPI driver
Ben Dooks [Fri, 28 May 2010 09:26:23 +0000]
ARM: s3c6400_defconfig: Add SPI driver

The SPI driver was added last kernel round, so enable
the core SPI and add the 64XX and bitbang driver as
modules.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>

10 years agoARM: s3c6400_defconfig: Update compiled machines
Ben Dooks [Fri, 28 May 2010 10:08:45 +0000]
ARM: s3c6400_defconfig: Update compiled machines

Add the machines that have been added in the last round
to the list of builds.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>

10 years agoARM: S5P: Regoster clk_xusbxti clock for hsotg driver
Thomas Abraham [Fri, 28 May 2010 02:41:16 +0000]
ARM: S5P: Regoster clk_xusbxti clock for hsotg driver

The clk_xusbxti clock is added to the list of clocks to be
registred during boot time clock registration.

Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
[ben-linux@fluff.org: edited title]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

10 years agoARM: S3C64XX: Add USB OTG HCLK to the list of clocks
Thomas Abraham [Fri, 28 May 2010 02:41:14 +0000]
ARM: S3C64XX: Add USB OTG HCLK to the list of clocks

Add the USB OTG HCLK clock to the list of clocks to be registered
during initialization.

Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

10 years agoARM: SAMSUNG: gpio-cfg.h: update documentation
Ben Dooks [Mon, 24 May 2010 03:21:40 +0000]
ARM: SAMSUNG: gpio-cfg.h: update documentation

Update the documentation on the gpio configuration calls to add more
references to useful information and also to document the values that
are passed.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>

10 years agoARM: SAMSUNG: Documentation: add documentation on GPIO code
Ben Dooks [Mon, 24 May 2010 03:13:30 +0000]
ARM: SAMSUNG: Documentation: add documentation on GPIO code

Add some documentation in Documentation/arm/Samsung for the GPIO code
and where to look for the necessary functions. Update the S3C24XX case
as well.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>

10 years agoARM: SAMSUNG: Fix documentation for s3c_gpio_cfgpin()
Ben Dooks [Mon, 24 May 2010 03:11:43 +0000]
ARM: SAMSUNG: Fix documentation for s3c_gpio_cfgpin()

Fix typo in s3c_gpio_cfgpin() documentation, the second argument is @to
not @pin again.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>

10 years agoARM: S3C24XX: Documentation: add section on gpiolib changes
Ben Dooks [Mon, 24 May 2010 02:23:53 +0000]
ARM: S3C24XX: Documentation: add section on gpiolib changes

Add section to the S3C24XX GPIO documentation on the recent changes
to move towards gpiolib integration.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>

10 years agoARM: S3C24XX: Documentation: update GPIO documentation
Ben Dooks [Mon, 24 May 2010 02:11:50 +0000]
ARM: S3C24XX: Documentation: update GPIO documentation

Upate the S3C24XX GPIO documentation after the changes for gpiolib
and show which calls are being replaced by gpiolib or the new s3c
generic calls.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>

10 years agoARM: S3C24XX: Documentation: update documentation overview
Ben Dooks [Mon, 24 May 2010 01:53:06 +0000]
ARM: S3C24XX: Documentation: update documentation overview

Add the two new SoCs added in this release cycle and update the notes
on the gpiolib conversion.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>

10 years agoARM: SAMSUNG: Documentation: update directory layout
Ben Dooks [Mon, 24 May 2010 01:48:02 +0000]
ARM: SAMSUNG: Documentation: update directory layout

Update the directory layout in Documentation/arm/Samsung/Overview.txt
to reflect the changes that have been made in the latest kernel
updates.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>

10 years agoARM: SAMSUNG: Documentation: update the list of SoCs supported
Ben Dooks [Mon, 24 May 2010 01:33:50 +0000]
ARM: SAMSUNG: Documentation: update the list of SoCs supported

Update the list of SoCs supported for the plat-s5p range.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>

10 years agocnic: Fix context memory init. on 5709.
Michael Chan [Thu, 27 May 2010 23:31:41 +0000]
cnic: Fix context memory init. on 5709.

We need to zero context memory on 5709 in the function cnic_init_context().
Without this, iscsid restart on 5709 will not work because of stale data.
TX context blocks should not be initialized by cnic_init_context() because
of the special remapping on 5709.

Update version to 2.1.2.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

10 years agodrivers/net: Eliminate a NULL pointer dereference
Julia Lawall [Thu, 27 May 2010 23:30:03 +0000]
drivers/net: Eliminate a NULL pointer dereference

At the point of the print, dev is NULL.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@r exists@
expression E,E1;
identifier f;
statement S1,S2,S3;
@@

if ((E == NULL && ...) || ...)
{
  ... when != if (...) S1 else S2
      when != E = E1
* E->f
  ... when any
  return ...;
}
else S3
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>

10 years agodrivers/net/hamradio: Eliminate a NULL pointer dereference
Julia Lawall [Thu, 27 May 2010 23:29:05 +0000]
drivers/net/hamradio: Eliminate a NULL pointer dereference

At the point of the print, dev is NULL.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@r exists@
expression E,E1;
identifier f;
statement S1,S2,S3;
@@

if ((E == NULL && ...) || ...)
{
  ... when != if (...) S1 else S2
      when != E = E1
* E->f
  ... when any
  return ...;
}
else S3
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>

10 years agobe2net: Patch removes redundant while statement in loop.
Sarveshwar Bandi [Thu, 27 May 2010 23:28:15 +0000]
be2net: Patch removes redundant while statement in loop.

Signed-off-by: Sarveshwar Bandi <sarveshwarb@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

10 years agoipv6: Add GSO support on forwarding path
Herbert Xu [Thu, 27 May 2010 23:14:30 +0000]
ipv6: Add GSO support on forwarding path

Currently we disallow GSO packets on the IPv6 forward path.
This patch fixes this.

Note that I discovered that our existing GSO MTU checks (e.g.,
IPv4 forwarding) are buggy in that they skip the check altogether,
when they really should be checking gso_size + header instead.

I have also been lazy here in that I haven't bothered to segment
the GSO packet by hand before generating an ICMP message.  Someone
should add that to be 100% correct.

Reported-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

10 years agonet: fix __neigh_event_send()
Eric Dumazet [Thu, 27 May 2010 23:09:39 +0000]
net: fix __neigh_event_send()

commit 7fee226ad23 (net: add a noref bit on skb dst) missed one spot
where an skb is enqueued, with a possibly not refcounted dst entry.

__neigh_event_send() inserts skb into arp_queue, so we must make sure
dst entry is refcounted, or dst entry can be freed by garbage collector
after caller exits from rcu protected section.

Reported-by: Ingo Molnar <mingo@elte.hu>
Tested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

10 years agoALSA: hda: Add support for another Lenovo ThinkPad Edge in conexant codec
Andreas Herrmann [Fri, 28 May 2010 07:57:12 +0000]
ALSA: hda: Add support for another Lenovo ThinkPad Edge in conexant codec

On a Thinkpad Edge 13 "01972NG" I had the problem that speakers played
sound although headphones were plugged in. Using model=ideapad with
latest alsa-git kernel fixed this. So adding this quirk to use ideapad
for another Thinkpad Edge variant seems sensible.

Cc: Jerone Young <jerone.young@canonical.com>
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

10 years agoleds: Fix leds-gpio openfirmware compile issue
Richard Purdie [Thu, 27 May 2010 13:04:36 +0000]
leds: Fix leds-gpio openfirmware compile issue

Fix a compile issue when openfirmware is enabled from commit
2146325df2c2640059a9e064890c30c6e259b458.

Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>

10 years agoleds: Kconfig fixes
Richard Purdie [Thu, 27 May 2010 12:08:33 +0000]
leds: Kconfig fixes

Soekris net5501 is x86 only and cleanup some undeeded dependencies

Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>

10 years agoALSA: hda: Use LPIB for Sony VPCS11V9E
Daniel T Chen [Thu, 27 May 2010 22:32:18 +0000]
ALSA: hda: Use LPIB for Sony VPCS11V9E

BugLink: https://launchpad.net/bugs/586347

Symptom: On the Sony VPCS11V9E, using GStreamer-based applications with
PulseAudio in Ubuntu 10.04 LTS results in stuttering audio. It appears
to worsen with increased I/O.

Test case: use Rhythmbox under increased I/O pressure. This symptom is
reproducible in the current daily stable alsa-driver snapshots (at least
up until 21 May 2010; later snapshots fail to build from source due to
missing preprocessor directives when compiled against 2.6.32).

Resolution: add SSID for this machine to the position_fix quirk table,
explicitly specifying the LPIB method.

Reported-and-Tested-By: Lauri Kainulainen <lauri@sokkelo.net>
Cc: <stable@kernel.org>
Signed-off-by: Daniel T Chen <crimsun@ubuntu.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

10 years agoALSA: usb-audio: fix feature unit parser for UAC2
Daniel Mack [Thu, 27 May 2010 18:15:14 +0000]
ALSA: usb-audio: fix feature unit parser for UAC2

Fix a small off-by-one bug which causes the feature unit to announce a
wrong number of channels. This leads to illegal requests sent to the
firmware eventually.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

10 years agofix fs/sysv s_dirt handling
Al Viro [Thu, 27 May 2010 13:04:07 +0000]
fix fs/sysv s_dirt handling

got broken on ->sync_fs() conversion a year ago, nobody noticed...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

10 years agofat: convert to use the new truncate convention.
npiggin@suse.de [Wed, 26 May 2010 15:05:38 +0000]
fat: convert to use the new truncate convention.

Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

10 years agoext2: convert to use the new truncate convention.
npiggin@suse.de [Wed, 26 May 2010 15:05:37 +0000]
ext2: convert to use the new truncate convention.

I also have commented a possible bug in existing ext2 code, marked with XXX.

Cc: linux-ext4@vger.kernel.org
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

10 years agotmpfs: convert to use the new truncate convention
npiggin@suse.de [Wed, 26 May 2010 15:05:36 +0000]
tmpfs: convert to use the new truncate convention

Cc: Christoph Hellwig <hch@lst.de>
Acked-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

10 years agofs: convert simple fs to new truncate
Nick Piggin [Thu, 27 May 2010 12:42:19 +0000]
fs: convert simple fs to new truncate

Convert simple filesystems: ramfs, configfs, sysfs, block_dev to new truncate
sequence.

Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

10 years agokill spurious reference to vmtruncate
npiggin@suse.de [Wed, 26 May 2010 15:05:34 +0000]
kill spurious reference to vmtruncate

Lots of filesystems calls vmtruncate despite not implementing the old
->truncate method.  Switch them to use simple_setsize and add some
comments about the truncate code where it seems fitting.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

10 years agofs: introduce new truncate sequence
npiggin@suse.de [Wed, 26 May 2010 15:05:33 +0000]
fs: introduce new truncate sequence

Introduce a new truncate calling sequence into fs/mm subsystems. Rather than
setattr > vmtruncate > truncate, have filesystems call their truncate sequence
from ->setattr if filesystem specific operations are required. vmtruncate is
deprecated, and truncate_pagecache and inode_newsize_ok helpers introduced
previously should be used.

simple_setattr is introduced for simple in-ram filesystems to implement
the new truncate sequence. Eventually all filesystems should be converted
to implement a setattr, and the default code in notify_change should go
away.

simple_setsize is also introduced to perform just the ATTR_SIZE portion
of simple_setattr (ie. changing i_size and trimming pagecache).

To implement the new truncate sequence:
- filesystem specific manipulations (eg freeing blocks) must be done in
  the setattr method rather than ->truncate.
- vmtruncate can not be used by core code to trim blocks past i_size in
  the event of write failure after allocation, so this must be performed
  in the fs code.
- convert usage of helpers block_write_begin, nobh_write_begin,
  cont_write_begin, and *blockdev_direct_IO* to use _newtrunc postfixed
  variants. These avoid calling vmtruncate to trim blocks (see previous).
- inode_setattr should not be used. generic_setattr is a new function
  to be used to copy simple attributes into the generic inode.
- make use of the better opportunity to handle errors with the new sequence.

Big problem with the previous calling sequence: the filesystem is not called
until i_size has already changed.  This means it is not allowed to fail the
call, and also it does not know what the previous i_size was. Also, generic
code calling vmtruncate to truncate allocated blocks in case of error had
no good way to return a meaningful error (or, for example, atomically handle
block deallocation).

Cc: Christoph Hellwig <hch@lst.de>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

10 years agofs/super: fix kernel-doc warning
Randy Dunlap [Tue, 25 May 2010 05:22:34 +0000]
fs/super: fix kernel-doc warning

Fix fs/super.c kernel-doc warning and function notation:
Warning(fs/super.c:957): No description found for parameter 'sb'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

10 years agofs/minix: bugfix, number of indirect block ptrs per block depends on block size
Erik van der Kouwe [Wed, 26 May 2010 10:03:23 +0000]
fs/minix: bugfix, number of indirect block ptrs per block depends on block size

The MINIX filesystem driver used a constant number of indirect block
pointers in an indirect block. This worked only for filesystems with 1kb
block, while the MINIX default block size is now 4kb. As a consequence,
large files were read incorrectly on such filesystems and writing a
large file would cause the filesystem to become corrupted. This patch
computes the number of indirect block pointers based on the block size,
making the driver work for each block size.

I would like to thank Feiran Zheng ('Fam') for pointing out the cause
of the corruption.

Signed-off-by: Erik van der Kouwe <vdkouwe@cs.vu.nl>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

10 years agorename the generic fsync implementations
Christoph Hellwig [Wed, 26 May 2010 15:53:41 +0000]
rename the generic fsync implementations

We don't name our generic fsync implementations very well currently.
The no-op implementation for in-memory filesystems currently is called
simple_sync_file which doesn't make too much sense to start with,
the the generic one for simple filesystems is called simple_fsync
which can lead to some confusion.

This patch renames the generic file fsync method to generic_file_fsync
to match the other generic_file_* routines it is supposed to be used
with, and the no-op implementation to noop_fsync to make it obvious
what to expect.  In addition add some documentation for both methods.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

10 years agodrop unused dentry argument to ->fsync
Christoph Hellwig [Wed, 26 May 2010 15:53:25 +0000]
drop unused dentry argument to ->fsync

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

10 years agofs: Add missing mutex_unlock
Julia Lawall [Wed, 26 May 2010 15:54:39 +0000]
fs: Add missing mutex_unlock

Add a mutex_unlock missing on the error path.  At other exists from the
function that return an error flag, the mutex is unlocked, so do the same
here.

The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression E1;
@@

* mutex_lock(E1,...);
  <+... when != E1
  if (...) {
    ... when != E1
*   return ...;
  }
  ...+>
* mutex_unlock(E1,...);
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

10 years agoFix racy use of anon_inode_getfd() in perf_event.c
Al Viro [Wed, 26 May 2010 21:40:29 +0000]
Fix racy use of anon_inode_getfd() in perf_event.c

once anon_inode_getfd() is called, you can't expect *anything* about
struct file that descriptor points to - another thread might be doing
whatever it likes with descriptor table at that point.

Cc: stable <stable@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

10 years agoget rid of the magic around f_count in aio
Al Viro [Wed, 26 May 2010 19:13:55 +0000]
get rid of the magic around f_count in aio

__aio_put_req() plays sick games with file refcount.  What
it wants is fput() from atomic context; it's almost always
done with f_count > 1, so they only have to deal with delayed
work in rare cases when their reference happens to be the
last one.  Current code decrements f_count and if it hasn't
hit 0, everything is fine.  Otherwise it keeps a pointer
to struct file (with zero f_count!) around and has delayed
work do __fput() on it.

Better way to do it: use atomic_long_add_unless( , -1, 1)
instead of !atomic_long_dec_and_test().  IOW, decrement it
only if it's not the last reference, leave refcount alone
if it was.  And use normal fput() in delayed work.

I've made that atomic_long_add_unless call a new helper -
fput_atomic().  Drops a reference to file if it's safe to
do in atomic (i.e. if that's not the last one), tells if
it had been able to do that.  aio.c converted to it, __fput()
use is gone.  req->ki_file *always* contributes to refcount
now.  And __fput() became static.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

10 years agoVFS: fix recent breakage of FS_REVAL_DOT
Neil Brown [Mon, 24 May 2010 06:57:56 +0000]
VFS: fix recent breakage of FS_REVAL_DOT

Commit 1f36f774b22a0ceb7dd33eca626746c81a97b6a5 broke FS_REVAL_DOT semantics.

In particular, before this patch, the command
   ls -l
in an NFS mounted directory would always check if the directory on the server
had changed and if so would flush and refill the pagecache for the dir.
After this patch, the same "ls -l" will repeatedly return stale date until
the cached attributes for the directory time out.

The following patch fixes this by ensuring the d_revalidate is called by
do_last when "." is being looked-up.
link_path_walk has already called d_revalidate, but in that case LOOKUP_OPEN
is not set so nfs_lookup_verify_inode chooses not to do any validation.

The following patch restores the original behaviour.

Cc: stable@kernel.org
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

10 years agoRevert "anon_inode: set S_IFREG on the anon_inode"
Al Viro [Thu, 27 May 2010 15:11:06 +0000]
Revert "anon_inode: set S_IFREG on the anon_inode"

This reverts commit a7cf4145bb86aaf85d4d4d29a69b50b688e2e49d.

10 years agoMerge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzi...
Linus Torvalds [Fri, 28 May 2010 01:34:58 +0000]
Merge branch 'upstream-linus' of git://git./linux/kernel/git/jgarzik/libata-dev

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  libata: implement dump_id force param
  libata: disable ATAPI AN by default
  libata-sff: make BMDMA optional
  libata-sff: kill dummy BMDMA ops from sata_qstor and pata_octeon_cf
  libata-sff: separate out BMDMA init
  libata-sff: separate out BMDMA irq handler
  libata-sff: ata_sff_irq_clear() is BMDMA specific
  sata_mv: drop unncessary EH callback resetting

10 years agoacpi_pad: uses MONITOR/MWAIT, so it doesn't need to clear TS_POLLING
Len Brown [Mon, 24 May 2010 15:41:00 +0000]
acpi_pad: uses MONITOR/MWAIT, so it doesn't need to clear TS_POLLING

api_pad exclusively uses MONITOR/MWAIT to sleep in idle,
so it does not need the wakeup IPI during idle sleep
that is provoked by clearing TS_POLLING.

Signed-off-by: Len Brown <len.brown@intel.com>
Cc: Shaohua Li <shaohua.li@intel.com>

10 years agosched: clarify commment for TS_POLLING
Len Brown [Mon, 24 May 2010 15:34:36 +0000]
sched: clarify commment for TS_POLLING

TS_POLLING set tells the scheduler an idle_task will poll
need_resched() to look for work.

TS_POLLING clear tells resched_task() and wake_up_idle_cpu()
that the remote CPU's idle_task is now sleeping in idle,
and thus requires a reschedule interrupt notice work.

Update the description of TS_POLLING to reflect how it works.
"idle task polling need_resched, skip sending interrupt"

Wordsmithing-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>

10 years agoACPI: allow a native cpuidle driver to displace ACPI
Len Brown [Sat, 22 May 2010 21:03:29 +0000]
ACPI: allow a native cpuidle driver to displace ACPI

The ACPI driver would fail probe when it found that
another driver had previously registered with cpuidle.

But this is a natural situation, as a native hardware
cpuidle driver should be able to bind instead of ACPI,
and the ACPI processor driver should be able to handle
yielding control of C-states while still handling
P-states and T-states.

Add a KERN_DEBUG line showing when acpi_idle
does successfully register.

Signed-off-by: Len Brown <len.brown@intel.com>

10 years agocpuidle: make cpuidle_curr_driver static
Len Brown [Sat, 22 May 2010 20:57:26 +0000]
cpuidle: make cpuidle_curr_driver static

cpuidle_register_driver() sets cpuidle_curr_driver
cpuidle_unregister_driver() clears cpuidle_curr_driver

We should't expose cpuidle_curr_driver to
potential modification except via these interfaces.
So make it static and create cpuidle_get_driver() to observe it.

Signed-off-by: Len Brown <len.brown@intel.com>

10 years agoMerge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
Linus Torvalds [Fri, 28 May 2010 00:46:47 +0000]
Merge branch 'release' of git://git./linux/kernel/git/aegl/linux-2.6

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] Fix build breakage

10 years ago[IA64] Fix build breakage
Tony Luck [Thu, 27 May 2010 22:35:13 +0000]
[IA64] Fix build breakage

In commit 0ac0c0d0f837c499afd02a802f9cf52d3027fa3b
cpusets: randomize node rotor used in cpuset_mem_spread_node()

Jack Steiner fixed a problem with too many small tasks being
assigned to node 0. Copy his code to ia64 to avoid build error.

    arch/ia64/kernel/smpboot.c:641: error: ‘cpu_to_node_map’ undeclared (first use in this function)

In commit 3bccd996276b108c138e8176793a26ecef54d573
numa: ia64: use generic percpu var numa_node_id() implementation

Lee Schermerhorn added some set_numa_node() calls - but these
only work on CONFIG_NUMA=y configurations. Surround the calls
with #ifdef CONFIG_NUMA

Signed-off-by: Tony Luck <tony.luck@intel.com>

10 years agoMerge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Thu, 27 May 2010 22:23:47 +0000]
Merge branch 'perf-core-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (61 commits)
  tracing: Add __used annotation to event variable
  perf, trace: Fix !x86 build bug
  perf report: Support multiple events on the TUI
  perf annotate: Fix up usage of the build id cache
  x86/mmiotrace: Remove redundant instruction prefix checks
  perf annotate: Add TUI interface
  perf tui: Remove annotate from popup menu after failure
  perf report: Don't start the TUI if -D is used
  perf: Fix getline undeclared
  perf: Optimize perf_tp_event_match()
  perf: Remove more code from the fastpath
  perf: Optimize the !vmalloc backed buffer
  perf: Optimize perf_output_copy()
  perf: Fix wakeup storm for RO mmap()s
  perf-record: Share per-cpu buffers
  perf-record: Remove -M
  perf: Ensure that IOC_OUTPUT isn't used to create multi-writer buffers
  perf, trace: Optimize tracepoints by using per-tracepoint-per-cpu hlist to track events
  perf, trace: Optimize tracepoints by removing IRQ-disable from perf/tracepoint interaction
  perf tui: Allow disabling the TUI on a per command basis in ~/.perfconfig
  ...

10 years agoposix_timer: Fix error path in timer_create
Andrey Vagin [Mon, 24 May 2010 19:15:33 +0000]
posix_timer: Fix error path in timer_create

Move CLOCK_DISPATCH(which_clock, timer_create, (new_timer)) after all
posible EFAULT erros.

*_timer_create may allocate/get resources.
(for example posix_cpu_timer_create does get_task_struct)

[ tglx: fold the remove crappy comment patch into this ]

Signed-off-by: Andrey Vagin <avagin@openvz.org>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: <stable@kernel.org>
Reviewed-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

10 years agoMerge branch 'for-linus' of git://git.o-hand.com/linux-rpurdie-backlight
Linus Torvalds [Thu, 27 May 2010 18:34:55 +0000]
Merge branch 'for-linus' of git://git.o-hand.com/linux-rpurdie-backlight

* 'for-linus' of git://git.o-hand.com/linux-rpurdie-backlight:
  gta02: Use pcf50633 backlight driver instead of platform backlight driver.
  backlight: pcf50633: Register a pcf50633-backlight device in pcf50633 core driver.
  backlight: Add pcf50633 backlight driver
  backlight: 88pm860x_bl: fix error handling in pm860x_backlight_probe
  backlight: max8925_bl: Fix error handling path
  backlight: l4f00242t03: fix error handling in l4f00242t03_probe
  backlight: add S6E63M0 AMOLED LCD Panel driver
  backlight: adp8860: add support for ADP8861 & ADP8863
  backlight: mbp_nvidia_bl - Fix DMI_SYS_VENDOR for MacBook1,1
  backlight: Add Cirrus EP93xx backlight driver
  backlight: l4f00242t03: Fix regulators handling code in remove function
  backlight: fix adp8860_bl build errors
  backlight: new driver for the ADP8860 backlight parts
  backlight: 88pm860x_bl - potential memory leak
  backlight: mbp_nvidia_bl - add support for older MacBookPro and MacBook 6,1.
  backlight: Kconfig cleanup
  backlight: backlight_device_register() return ERR_PTR()

10 years agoMerge branch 'for-linus' of git://git.o-hand.com/linux-rpurdie-leds
Linus Torvalds [Thu, 27 May 2010 18:34:20 +0000]
Merge branch 'for-linus' of git://git.o-hand.com/linux-rpurdie-leds

* 'for-linus' of git://git.o-hand.com/linux-rpurdie-leds:
  leds: Add mx31moboard MC13783 led support
  leds: Add mc13783 LED support
  leds: leds-ss4200: fix led_classdev_unregister twice in error handling
  leds: leds-lp3944: properly handle lp3944_configure fail in lp3944_probe
  leds: led-class: set permissions on max_brightness file to 0444
  leds: leds-gpio: Change blink_set callback to be able to turn off blinking
  leds: Add LED driver for the Soekris net5501 board
  leds: 88pm860x - fix checking in probe function

10 years agoMerge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelv...
Linus Torvalds [Thu, 27 May 2010 18:33:46 +0000]
Merge branch 'hwmon-for-linus' of git://git./linux/kernel/git/jdelvare/staging

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: (23 commits)
  hwmon: (lm75) Add support for the Texas Instruments TMP105
  hwmon: (ltc4245) Read only one GPIO pin
  hwmon: (dme1737) Add SCH5127 support
  hwmon: (tmp102) Don't always stop chip at exit
  hwmon: (tmp102) Fix suspend and resume functions
  hwmon: (tmp102) Various fixes
  hwmon: Driver for TI TMP102 temperature sensor
  hwmon: EMC1403 thermal sensor support
  hwmon: (applesmc) Add temperature sensor labels to sysfs interface
  hwmon: (applesmc) Add generic support for MacBook Pro 7
  hwmon: (applesmc) Add generic support for MacBook Pro 6
  hwmon: (applesmc) Add support for MacBook Pro 5,3 and 5,4
  hwmon: (tmp401) Reorganize code to get rid of static forward declarations
  hwmon: (tmp401) Use constants for sysfs file permissions
  hwmon: (adm1031) Allow setting update rate
  hwmon: Add description of the update_rate sysfs attribute
  hwmon: (lm90) Use programmed update rate
  hwmon: (f71882fg) Acquire I/O regions while we're working with them
  hwmon: (f71882fg) Code cleanup
  hwmon: (f71882fg) Use strict_stro(l|ul) instead of simple_strto$1
  ...

10 years agohwmon: (lm75) Add support for the Texas Instruments TMP105
Shubhrajyoti Datta [Thu, 27 May 2010 17:59:03 +0000]
hwmon: (lm75) Add support for the Texas Instruments TMP105

Add support for the Texas Instruments TMP105 temperature sensor
device.

Signed-off-by: Shubhrajyoti Datta <shubhrajyoti@ti.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

10 years agohwmon: (ltc4245) Read only one GPIO pin
Ira W. Snyder [Thu, 27 May 2010 17:59:02 +0000]
hwmon: (ltc4245) Read only one GPIO pin

Read only one of the GPIO pins as an analog voltage. The ADC can be
switched to a different GPIO pin at runtime, but this is not supported.

Previously, this driver would report the analog voltage of the currently
selected GPIO pin as all three GPIO voltages: in9_input, in10_input and
in11_input.

Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: stable@kernel.org

10 years agohwmon: (dme1737) Add SCH5127 support
Juerg Haefliger [Thu, 27 May 2010 17:59:01 +0000]
hwmon: (dme1737) Add SCH5127 support

Add support for the hardware monitoring capabilities of the SCH5127
chip to the dme1737 driver.

Signed-off-by: Juerg Haefliger <juergh@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Jeff Rickman <jrickman@myamigos.us>

10 years agohwmon: (tmp102) Don't always stop chip at exit
Jean Delvare [Thu, 27 May 2010 17:58:59 +0000]
hwmon: (tmp102) Don't always stop chip at exit

Only stop the chip at driver exit if it was stopped when driver was
loaded. Leave it running otherwise.

Also restore the device configuration if probe failed, to not leave
the system in a dangling state.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Steven King <sfking@fdwdc.com>

10 years agohwmon: (tmp102) Fix suspend and resume functions
Jean Delvare [Thu, 27 May 2010 17:58:58 +0000]
hwmon: (tmp102) Fix suspend and resume functions

Suspend and resume functions shouldn't overwrite the configuration
register. They should only alter the one bit they have to touch.

Also don't assume that register reads and writes always succeed.
Handle errors properly, shall they happen.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Steven King <sfking@fdwdc.com>

10 years agohwmon: (tmp102) Various fixes
Jean Delvare [Thu, 27 May 2010 17:58:57 +0000]
hwmon: (tmp102) Various fixes

Fixes from my driver review:
http://lists.lm-sensors.org/pipermail/lm-sensors/2010-March/028051.html

Only the small changes are in there, more important changes will come
later separately as time permits.

* Drop the remnants of the now gone detect function
* The TMP102 has no known compatible chip
* Include the right header files
* Clarify why byte swapping of register values is needed
* Strip resolution info bit from temperature register value
* Set cache lifetime to 1/3 second
* Don't arbitrarily reject limit values; clamp as needed
* Make limit writing unconditional
* Don't check for transaction types the driver doesn't use
* Properly check for error when setting configuration
* Report error on failed probe
* Make the driver load automatically where needed
* Various other minor fixes

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Steven King <sfking@fdwdc.com>

10 years agohwmon: Driver for TI TMP102 temperature sensor
Steven King [Thu, 27 May 2010 17:58:56 +0000]
hwmon: Driver for TI TMP102 temperature sensor

Driver for the TI TMP102.

The TI TMP102 is similar to the LM75.  It differs from the LM75 by
having a 16-bit conf register and the temp registers have a minimum
resolution of 12 bits; the extended conf register can select 13-bit
resolution (which this driver does) and also change the update rate
(which this driver currently doesn't use).

[JD: Fix tmp102_exit tag, must be __exit, not __init.]

Signed-off-by: Steven King <sfking@fdwdc.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

10 years agohwmon: EMC1403 thermal sensor support
Kalhan Trisal [Thu, 27 May 2010 17:58:56 +0000]
hwmon: EMC1403 thermal sensor support

Provides support for the EMC1403 thermal sensor. Only reporting of values
is supported. The various Moorestown specific extras to do with thermal
alerts and the like are not in this version of the driver.

Considerably edited and tidied up by Alan Cox, plus fixes and detection
bits from Jean Delvare.

Signed-off-by: Kalhan Trisal <kalhan.trisal@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>