5 years agoip6tnl: allow to use rtnl ops on fb tunnel
Nicolas Dichtel [Tue, 1 Oct 2013 16:05:00 +0000]
ip6tnl: allow to use rtnl ops on fb tunnel

[ Upstream commit bb8140947a247b9aa15652cc24dc555ebb0b64b0 ]

rtnl ops where introduced by c075b13098b3 ("ip6tnl: advertise tunnel param via
rtnl"), but I forget to assign rtnl ops to fb tunnels.

Now that it is done, we must remove the explicit call to
unregister_netdevice_queue(), because  the fallback tunnel is added to the queue
in ip6_tnl_destroy_tunnels() when checking rtnl_link_ops of all netdevices (this
is valid since commit 0bd8762824e7 ("ip6tnl: add x-netns support")).

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agosit: allow to use rtnl ops on fb tunnel
Nicolas Dichtel [Tue, 1 Oct 2013 16:04:59 +0000]
sit: allow to use rtnl ops on fb tunnel

[ Upstream commit 205983c43700ac3a81e7625273a3fa83cd2759b5 ]

rtnl ops where introduced by ba3e3f50a0e5 ("sit: advertise tunnel param via
rtnl"), but I forget to assign rtnl ops to fb tunnels.

Now that it is done, we must remove the explicit call to
unregister_netdevice_queue(), because  the fallback tunnel is added to the queue
in sit_destroy_tunnels() when checking rtnl_link_ops of all netdevices (this
is valid since commit 5e6700b3bf98 ("sit: add support of x-netns")).

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agoip_tunnel: Fix a memory corruption in ip_tunnel_xmit
Steffen Klassert [Tue, 1 Oct 2013 09:33:59 +0000]
ip_tunnel: Fix a memory corruption in ip_tunnel_xmit

[ Upstream commit 3e08f4a72f689c6296d336c2aab4bddd60c93ae2 ]

We might extend the used aera of a skb beyond the total
headroom when we install the ipip header. Fix this by
calling skb_cow_head() unconditionally.

Bug was introduced with commit c544193214
("GRE: Refactor GRE tunneling code.")

Cc: Pravin Shelar <pshelar@nicira.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agoll_temac: Reset dma descriptors indexes on ndo_open
Ricardo Ribalda [Tue, 1 Oct 2013 06:17:10 +0000]
ll_temac: Reset dma descriptors indexes on ndo_open

[ Upstream commit 7167cf0e8cd10287b7912b9ffcccd9616f382922 ]

The dma descriptors indexes are only initialized on the probe function.

If a packet is on the buffer when temac_stop is called, the dma
descriptors indexes can be left on a incorrect state where no other
package can be sent.

So an interface could be left in an usable state after ifdow/ifup.

This patch makes sure that the descriptors indexes are in a proper
status when the device is open.

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agoipv6 mcast: use in6_dev_put in timer handlers instead of __in6_dev_put
Salam Noureddine [Sun, 29 Sep 2013 20:41:34 +0000]
ipv6 mcast: use in6_dev_put in timer handlers instead of __in6_dev_put

[ Upstream commit 9260d3e1013701aa814d10c8fc6a9f92bd17d643 ]

It is possible for the timer handlers to run after the call to
ipv6_mc_down so use in6_dev_put instead of __in6_dev_put in the
handler function in order to do proper cleanup when the refcnt
reaches 0. Otherwise, the refcnt can reach zero without the
inet6_dev being destroyed and we end up leaking a reference to
the net_device and see messages like the following,

unregister_netdevice: waiting for eth0 to become free. Usage count = 1

Tested on linux-3.4.43.

Signed-off-by: Salam Noureddine <noureddine@aristanetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agoipv4 igmp: use in_dev_put in timer handlers instead of __in_dev_put
Salam Noureddine [Sun, 29 Sep 2013 20:39:42 +0000]
ipv4 igmp: use in_dev_put in timer handlers instead of __in_dev_put

[ Upstream commit e2401654dd0f5f3fb7a8d80dad9554d73d7ca394 ]

It is possible for the timer handlers to run after the call to
ip_mc_down so use in_dev_put instead of __in_dev_put in the handler
function in order to do proper cleanup when the refcnt reaches 0.
Otherwise, the refcnt can reach zero without the in_device being
destroyed and we end up leaking a reference to the net_device and
see messages like the following,

unregister_netdevice: waiting for eth0 to become free. Usage count = 1

Tested on linux-3.4.43.

Signed-off-by: Salam Noureddine <noureddine@aristanetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agoipv6: gre: correct calculation of max_headroom
Hannes Frederic Sowa [Sun, 29 Sep 2013 03:40:50 +0000]
ipv6: gre: correct calculation of max_headroom

[ Upstream commit 3da812d860755925da890e8c713f2d2e2d7b1bae ]

gre_hlen already accounts for sizeof(struct ipv6_hdr) + gre header,
so initialize max_headroom to zero. Otherwise the

if (encap_limit >= 0) {
max_headroom += 8;
mtu -= 8;
}

increments an uninitialized variable before max_headroom was reset.

Found with coverity: 728539

Cc: Dmitry Kozlov <xeb@mail.ru>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agobonding: Fix broken promiscuity reference counting issue
Neil Horman [Fri, 27 Sep 2013 16:22:15 +0000]
bonding: Fix broken promiscuity reference counting issue

[ Upstream commit 5a0068deb611109c5ba77358be533f763f395ee4 ]

Recently grabbed this report:
https://bugzilla.redhat.com/show_bug.cgi?id=1005567

Of an issue in which the bonding driver, with an attached vlan encountered the
following errors when bond0 was taken down and back up:

dummy1: promiscuity touches roof, set promiscuity failed. promiscuity feature of
device might be broken.

The error occurs because, during __bond_release_one, if we release our last
slave, we take on a random mac address and issue a NETDEV_CHANGEADDR
notification.  With an attached vlan, the vlan may see that the vlan and bond
mac address were in sync, but no longer are.  This triggers a call to dev_uc_add
and dev_set_rx_mode, which enables IFF_PROMISC on the bond device.  Then, when
we complete __bond_release_one, we use the current state of the bond flags to
determine if we should decrement the promiscuity of the releasing slave.  But
since the bond changed promiscuity state during the release operation, we
incorrectly decrement the slave promisc count when it wasn't in promiscuous mode
to begin with, causing the above error

Fix is pretty simple, just cache the bonding flags at the start of the function
and use those when determining the need to set promiscuity.

This is also needed for the ALLMULTI flag

Reported-by: Mark Wu <wudxw@linux.vnet.ibm.com>
CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
CC: Mark Wu <wudxw@linux.vnet.ibm.com>
CC: "David S. Miller" <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agodm9601: fix IFF_ALLMULTI handling
Peter Korsgaard [Mon, 30 Sep 2013 21:28:20 +0000]
dm9601: fix IFF_ALLMULTI handling

[ Upstream commit bf0ea6380724beb64f27a722dfc4b0edabff816e ]

Pass-all-multicast is controlled by bit 3 in RX control, not bit 2
(pass undersized frames).

Reported-by: Joseph Chang <joseph_chang@davicom.com.tw>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agonet: net_secret should not depend on TCP
Eric Dumazet [Tue, 24 Sep 2013 13:19:57 +0000]
net: net_secret should not depend on TCP

[ Upstream commit 9a3bab6b05383f1e4c3716b3615500c51285959e ]

A host might need net_secret[] and never open a single socket.

Problem added in commit aebda156a570782
("net: defer net_secret[] initialization")

Based on prior patch from Hannes Frederic Sowa.

Reported-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Hannes Frederic Sowa <hannes@strressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agoIPv6 NAT: Do not drop DNATed 6to4/6rd packets
Catalin(ux) M. BOIE [Mon, 23 Sep 2013 20:04:19 +0000]
IPv6 NAT: Do not drop DNATed 6to4/6rd packets

[ Upstream commit 7df37ff33dc122f7bd0614d707939fe84322d264 ]

When a router is doing DNAT for 6to4/6rd packets the latest
anti-spoofing commit 218774dc ("ipv6: add anti-spoofing checks for
6to4 and 6rd") will drop them because the IPv6 address embedded does
not match the IPv4 destination. This patch will allow them to pass by
testing if we have an address that matches on 6to4/6rd interface.  I
have been hit by this problem using Fedora and IPV6TO4_IPV4ADDR.
Also, log the dropped packets (with rate limit).

Signed-off-by: Catalin(ux) M. BOIE <catab@embedromix.ro>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agovia-rhine: fix VLAN priority field (PCP, IEEE 802.1p)
Roger Luethi [Sat, 21 Sep 2013 12:24:11 +0000]
via-rhine: fix VLAN priority field (PCP, IEEE 802.1p)

[ Upstream commit 207070f5221e2a901d56a49df9cde47d9b716cd7 ]

Outgoing packets sent by via-rhine have their VLAN PCP field off by one
(when hardware acceleration is enabled). The TX descriptor expects only VID
and PCP (without a CFI/DEI bit).

Peter Boström noticed and reported the bug.

Signed-off-by: Roger Luethi <rl@hellgate.ch>
Cc: Peter Boström <peter.bostrom@netrounds.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agoipv6: udp packets following an UFO enqueued packet need also be handled by UFO
Hannes Frederic Sowa [Sat, 21 Sep 2013 04:27:00 +0000]
ipv6: udp packets following an UFO enqueued packet need also be handled by UFO

[ Upstream commit 2811ebac2521ceac84f2bdae402455baa6a7fb47 ]

In the following scenario the socket is corked:
If the first UDP packet is larger then the mtu we try to append it to the
write queue via ip6_ufo_append_data. A following packet, which is smaller
than the mtu would be appended to the already queued up gso-skb via
plain ip6_append_data. This causes random memory corruptions.

In ip6_ufo_append_data we also have to be careful to not queue up the
same skb multiple times. So setup the gso frame only when no first skb
is available.

This also fixes a shortcoming where we add the current packet's length to
cork->length but return early because of a packet > mtu with dontfrag set
(instead of sutracting it again).

Found with trinity.

Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agoip: generate unique IP identificator if local fragmentation is allowed
Ansis Atteka [Wed, 18 Sep 2013 22:29:53 +0000]
ip: generate unique IP identificator if local fragmentation is allowed

[ Upstream commit 703133de331a7a7df47f31fb9de51dc6f68a9de8 ]

If local fragmentation is allowed, then ip_select_ident() and
ip_select_ident_more() need to generate unique IDs to ensure
correct defragmentation on the peer.

For example, if IPsec (tunnel mode) has to encrypt large skbs
that have local_df bit set, then all IP fragments that belonged
to different ESP datagrams would have used the same identificator.
If one of these IP fragments would get lost or reordered, then
peer could possibly stitch together wrong IP fragments that did
not belong to the same datagram. This would lead to a packet loss
or data corruption.

Signed-off-by: Ansis Atteka <aatteka@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agoip: use ip_hdr() in __ip_make_skb() to retrieve IP header
Ansis Atteka [Wed, 18 Sep 2013 22:29:52 +0000]
ip: use ip_hdr() in __ip_make_skb() to retrieve IP header

[ Upstream commit 749154aa56b57652a282cbde57a57abc278d1205 ]

skb->data already points to IP header, but for the sake of
consistency we can also use ip_hdr() to retrieve it.

Signed-off-by: Ansis Atteka <aatteka@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agonet:dccp: do not report ICMP redirects to user space
Duan Jiong [Wed, 18 Sep 2013 12:03:27 +0000]
net:dccp: do not report ICMP redirects to user space

[ Upstream commit bd784a140712fd06674f2240eecfc4ccae421129 ]

DCCP shouldn't be setting sk_err on redirects as it
isn't an error condition. it should be doing exactly
what tcp is doing and leaving the error handler without
touching the socket.

Signed-off-by: Duan Jiong <duanj.fnst@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agonet: sctp: rfc4443: do not report ICMP redirects to user space
Daniel Borkmann [Mon, 16 Sep 2013 10:36:02 +0000]
net: sctp: rfc4443: do not report ICMP redirects to user space

[ Upstream commit 3f96a532113131d5a65ac9e00fc83cfa31b0295f ]

Adapt the same behaviour for SCTP as present in TCP for ICMP redirect
messages. For IPv6, RFC4443, section 2.4. says:

  ...
  (e) An ICMPv6 error message MUST NOT be originated as a result of
      receiving the following:
  ...
       (e.2) An ICMPv6 redirect message [IPv6-DISC].
  ...

Therefore, do not report an error to user space, just invoke dst's redirect
callback and leave, same for IPv4 as done in TCP as well. The implication
w/o having this patch could be that the reception of such packets would
generate a poll notification and in worst case it could even tear down the
whole connection. Therefore, stop updating sk_err on redirects.

Reported-by: Duan Jiong <duanj.fnst@cn.fujitsu.com>
Reported-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Suggested-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agoip6_tunnels: raddr and laddr are inverted in nl msg
Ding Zhi [Mon, 16 Sep 2013 09:31:15 +0000]
ip6_tunnels: raddr and laddr are inverted in nl msg

[ Upstream commit 0d2ede929f61783aebfb9228e4d32a0546ee4d23 ]

IFLA_IPTUN_LOCAL and IFLA_IPTUN_REMOTE were inverted.

Introduced by c075b13098b3 (ip6tnl: advertise tunnel param via rtnl).

Signed-off-by: Ding Zhi <zhi.ding@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agobridge: fix NULL pointer deref of br_port_get_rcu
Hong Zhiguo [Sat, 14 Sep 2013 14:42:28 +0000]
bridge: fix NULL pointer deref of br_port_get_rcu

[ Upstream commit 716ec052d2280d511e10e90ad54a86f5b5d4dcc2 ]

The NULL deref happens when br_handle_frame is called between these
2 lines of del_nbp:
dev->priv_flags &= ~IFF_BRIDGE_PORT;
/* --> br_handle_frame is called at this time */
netdev_rx_handler_unregister(dev);

In br_handle_frame the return of br_port_get_rcu(dev) is dereferenced
without check but br_port_get_rcu(dev) returns NULL if:
!(dev->priv_flags & IFF_BRIDGE_PORT)

Eric Dumazet pointed out the testing of IFF_BRIDGE_PORT is not necessary
here since we're in rcu_read_lock and we have synchronize_net() in
netdev_rx_handler_unregister. So remove the testing of IFF_BRIDGE_PORT
and by the previous patch, make sure br_port_get_rcu is called in
bridging code.

Signed-off-by: Hong Zhiguo <zhiguohong@tencent.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agobridge: use br_port_get_rtnl within rtnl lock
Hong Zhiguo [Sat, 14 Sep 2013 14:42:27 +0000]
bridge: use br_port_get_rtnl within rtnl lock

[ Upstream commit 1fb1754a8c70d69ab480763c423e0a74369c4a67 ]

current br_port_get_rcu is problematic in bridging path
(NULL deref). Change these calls in netlink path first.

Signed-off-by: Hong Zhiguo <zhiguohong@tencent.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agobridge: Clamp forward_delay when enabling STP
Herbert Xu [Thu, 12 Sep 2013 07:12:05 +0000]
bridge: Clamp forward_delay when enabling STP

[ Upstream commit be4f154d5ef0ca147ab6bcd38857a774133f5450 ]

At some point limits were added to forward_delay.  However, the
limits are only enforced when STP is enabled.  This created a
scenario where you could have a value outside the allowed range
while STP is disabled, which then stuck around even after STP
is enabled.

This patch fixes this by clamping the value when we enable STP.

I had to move the locking around a bit to ensure that there is
no window where someone could insert a value outside the range
while we're in the middle of enabling STP.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agoresubmit bridge: fix message_age_timer calculation
Chris Healy [Thu, 12 Sep 2013 04:37:47 +0000]
resubmit bridge: fix message_age_timer calculation

[ Upstream commit 9a0620133ccce9dd35c00a96405c8d80938c2cc0 ]

This changes the message_age_timer calculation to use the BPDU's max age as
opposed to the local bridge's max age.  This is in accordance with section
8.6.2.3.2 Step 2 of the 802.1D-1998 sprecification.

With the current implementation, when running with very large bridge
diameters, convergance will not always occur even if a root bridge is
configured to have a longer max age.

Tested successfully on bridge diameters of ~200.

Signed-off-by: Chris Healy <cphealy@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agoxen-netback: count number required slots for an skb more carefully
David Vrabel [Wed, 11 Sep 2013 13:52:48 +0000]
xen-netback: count number required slots for an skb more carefully

[ Upstream commit 6e43fc04a6bc357d260583b8440882f28069207f ]

When a VM is providing an iSCSI target and the LUN is used by the
backend domain, the generated skbs for direct I/O writes to the disk
have large, multi-page skb->data but no frags.

With some lengths and starting offsets, xen_netbk_count_skb_slots()
would be one short because the simple calculation of
DIV_ROUND_UP(skb_headlen(), PAGE_SIZE) was not accounting for the
decisions made by start_new_rx_buffer() which does not guarantee
responses are fully packed.

For example, a skb with length < 2 pages but which spans 3 pages would
be counted as requiring 2 slots but would actually use 3 slots.

skb->data:

    |        1111|222222222222|3333        |

Fully packed, this would need 2 slots:

    |111122222222|22223333    |

But because the 2nd page wholy fits into a slot it is not split across
slots and goes into a slot of its own:

    |1111        |222222222222|3333        |

Miscounting the number of slots means netback may push more responses
than the number of available requests.  This will cause the frontend
to get very confused and report "Too many frags/slots".  The frontend
never recovers and will eventually BUG.

Fix this by counting the number of required slots more carefully.  In
xen_netbk_count_skb_slots(), more closely follow the algorithm used by
xen_netbk_gop_skb() by introducing xen_netbk_count_frag_slots() which
is the dry-run equivalent of netbk_gop_frag_copy().

Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agonet: sctp: fix ipv6 ipsec encryption bug in sctp_v6_xmit
Daniel Borkmann [Wed, 11 Sep 2013 14:58:36 +0000]
net: sctp: fix ipv6 ipsec encryption bug in sctp_v6_xmit

[ Upstream commit 95ee62083cb6453e056562d91f597552021e6ae7 ]

Alan Chester reported an issue with IPv6 on SCTP that IPsec traffic is not
being encrypted, whereas on IPv4 it is. Setting up an AH + ESP transport
does not seem to have the desired effect:

SCTP + IPv4:

  22:14:20.809645 IP (tos 0x2,ECT(0), ttl 64, id 0, offset 0, flags [DF], proto AH (51), length 116)
    192.168.0.2 > 192.168.0.5: AH(spi=0x00000042,sumlen=16,seq=0x1): ESP(spi=0x00000044,seq=0x1), length 72
  22:14:20.813270 IP (tos 0x2,ECT(0), ttl 64, id 0, offset 0, flags [DF], proto AH (51), length 340)
    192.168.0.5 > 192.168.0.2: AH(spi=0x00000043,sumlen=16,seq=0x1):

SCTP + IPv6:

  22:31:19.215029 IP6 (class 0x02, hlim 64, next-header SCTP (132) payload length: 364)
    fe80::222:15ff:fe87:7fc.3333 > fe80::92e6:baff:fe0d:5a54.36767: sctp
    1) [INIT ACK] [init tag: 747759530] [rwnd: 62464] [OS: 10] [MIS: 10]

Moreover, Alan says:

  This problem was seen with both Racoon and Racoon2. Other people have seen
  this with OpenSwan. When IPsec is configured to encrypt all upper layer
  protocols the SCTP connection does not initialize. After using Wireshark to
  follow packets, this is because the SCTP packet leaves Box A unencrypted and
  Box B believes all upper layer protocols are to be encrypted so it drops
  this packet, causing the SCTP connection to fail to initialize. When IPsec
  is configured to encrypt just SCTP, the SCTP packets are observed unencrypted.

In fact, using `socat sctp6-listen:3333 -` on one end and transferring "plaintext"
string on the other end, results in cleartext on the wire where SCTP eventually
does not report any errors, thus in the latter case that Alan reports, the
non-paranoid user might think he's communicating over an encrypted transport on
SCTP although he's not (tcpdump ... -X):

  ...
  0x0030: 5d70 8e1a 0003 001a 177d eb6c 0000 0000  ]p.......}.l....
  0x0040: 0000 0000 706c 6169 6e74 6578 740a 0000  ....plaintext...

Only in /proc/net/xfrm_stat we can see XfrmInTmplMismatch increasing on the
receiver side. Initial follow-up analysis from Alan's bug report was done by
Alexey Dobriyan. Also thanks to Vlad Yasevich for feedback on this.

SCTP has its own implementation of sctp_v6_xmit() not calling inet6_csk_xmit().
This has the implication that it probably never really got updated along with
changes in inet6_csk_xmit() and therefore does not seem to invoke xfrm handlers.

SCTP's IPv4 xmit however, properly calls ip_queue_xmit() to do the work. Since
a call to inet6_csk_xmit() would solve this problem, but result in unecessary
route lookups, let us just use the cached flowi6 instead that we got through
sctp_v6_get_dst(). Since all SCTP packets are being sent through sctp_packet_transmit(),
we do the route lookup / flow caching in sctp_transport_route(), hold it in
tp->dst and skb_dst_set() right after that. If we would alter fl6->daddr in
sctp_v6_xmit() to np->opt->srcrt, we possibly could run into the same effect
of not having xfrm layer pick it up, hence, use fl6_update_dst() in sctp_v6_get_dst()
instead to get the correct source routed dst entry, which we assign to the skb.

Also source address routing example from 625034113 ("sctp: fix sctp to work with
ipv6 source address routing") still works with this patch! Nevertheless, in RFC5095
it is actually 'recommended' to not use that anyway due to traffic amplification [1].
So it seems we're not supposed to do that anyway in sctp_v6_xmit(). Moreover, if
we overwrite the flow destination here, the lower IPv6 layer will be unable to
put the correct destination address into IP header, as routing header is added in
ipv6_push_nfrag_opts() but then probably with wrong final destination. Things aside,
result of this patch is that we do not have any XfrmInTmplMismatch increase plus on
the wire with this patch it now looks like:

SCTP + IPv6:

  08:17:47.074080 IP6 2620:52:0:102f:7a2b:cbff:fe27:1b0a > 2620:52:0:102f:213:72ff:fe32:7eba:
    AH(spi=0x00005fb4,seq=0x1): ESP(spi=0x00005fb5,seq=0x1), length 72
  08:17:47.074264 IP6 2620:52:0:102f:213:72ff:fe32:7eba > 2620:52:0:102f:7a2b:cbff:fe27:1b0a:
    AH(spi=0x00003d54,seq=0x1): ESP(spi=0x00003d55,seq=0x1), length 296

This fixes Kernel Bugzilla 24412. This security issue seems to be present since
2.6.18 kernels. Lets just hope some big passive adversary in the wild didn't have
its fun with that. lksctp-tools IPv6 regression test suite passes as well with
this patch.

 [1] http://www.secdev.org/conf/IPv6_RH_security-csw07.pdf

Reported-by: Alan Chester <alan.chester@tekelec.com>
Reported-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agotuntap: correctly handle error in tun_set_iff()
Jason Wang [Wed, 11 Sep 2013 10:09:48 +0000]
tuntap: correctly handle error in tun_set_iff()

[ Upstream commit 662ca437e714caaab855b12415d6ffd815985bc0 ]

Commit c8d68e6be1c3b242f1c598595830890b65cea64a
(tuntap: multiqueue support) only call free_netdev() on error in
tun_set_iff(). This causes several issues:

- memory of tun security were leaked
- use after free since the flow gc timer was not deleted and the tfile
  were not detached

This patch solves the above issues.

Reported-by: Wannes Rombouts <wannes.rombouts@epitech.eu>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agonetpoll: fix NULL pointer dereference in netpoll_cleanup
Nikolay Aleksandrov [Thu, 19 Sep 2013 13:02:35 +0000]
netpoll: fix NULL pointer dereference in netpoll_cleanup

[ Upstream commit d0fe8c888b1fd1a2f84b9962cabcb98a70988aec ]

I've been hitting a NULL ptr deref while using netconsole because the
np->dev check and the pointer manipulation in netpoll_cleanup are done
without rtnl and the following sequence happens when having a netconsole
over a vlan and we remove the vlan while disabling the netconsole:
CPU 1 CPU2
removes vlan and calls the notifier
enters store_enabled(), calls
netdev_cleanup which checks np->dev
and then waits for rtnl
executes the netconsole netdev
release notifier making np->dev
== NULL and releases rtnl
continues to dereference a member of
np->dev which at this point is == NULL

Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agonetpoll: Should handle ETH_P_ARP other than ETH_P_IP in netpoll_neigh_reply
Sonic Zhang [Wed, 11 Sep 2013 03:31:53 +0000]
netpoll: Should handle ETH_P_ARP other than ETH_P_IP in netpoll_neigh_reply

[ Upstream commit b0dd663b60944a3ce86430fa35549fb37968bda0 ]

The received ARP request type in the Ethernet packet head is ETH_P_ARP other than ETH_P_IP.

[ Bug introduced by commit b7394d2429c198b1da3d46ac39192e891029ec0f
  ("netpoll: prepare for ipv6") ]

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agor8169: enforce RX_MULTI_EN for the 8168f.
Francois Romieu [Sat, 7 Sep 2013 23:15:35 +0000]
r8169: enforce RX_MULTI_EN for the 8168f.

[ Upstream commit 3ced8c955e74d319f3e3997f7169c79d524dfd06 ]

Same narrative as eb2dc35d99028b698cdedba4f5522bc43e576bd2 ("r8169: RxConfig
hack for the 8168evl.") regarding AMD IOMMU errors.

RTL_GIGA_MAC_VER_36 - 8168f as well - has not been reported to behave the
same.

Tested-by: David R <david@unsolicited.net>
Tested-by: Frédéric Leroy <fredo@starox.org>
Cc: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agonet_sched: htb: fix a typo in htb_change_class()
Vimalkumar [Wed, 11 Sep 2013 00:36:37 +0000]
net_sched: htb: fix a typo in htb_change_class()

[ Upstream commit f3ad857e3da1abaea780dc892b592cd86c541c52 ]

Fix a typo added in commit 56b765b79 ("htb: improved accuracy at high
rates")

cbuffer should not be a copy of buffer.

Signed-off-by: Vimalkumar <j.vimal@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Jiri Pirko <jpirko@redhat.com>
Reviewed-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agonet: flow_dissector: fix thoff for IPPROTO_AH
Eric Dumazet [Thu, 26 Sep 2013 15:44:06 +0000]
net: flow_dissector: fix thoff for IPPROTO_AH

[ Upstream commit b86783587b3d1d552326d955acee37eac48800f1 ]

In commit 8ed781668dd49 ("flow_keys: include thoff into flow_keys for
later usage"), we missed that existing code was using nhoff as a
temporary variable that could not always contain transport header
offset.

This is not a problem for TCP/UDP because port offset (@poff)
is 0 for these protocols.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Daniel Borkmann <dborkman@redhat.com>
Cc: Nikolay Aleksandrov <nikolay@redhat.com>
Acked-by: Nikolay Aleksandrov <nikolay@redhat.com>
Acked-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agonet: fix multiqueue selection
Eric Dumazet [Sat, 7 Sep 2013 19:02:57 +0000]
net: fix multiqueue selection

[ Upstream commit 50d1784ee4683f073c0362ee360bfae7a3333d6c ]

commit 416186fbf8c5b4e4465 ("net: Split core bits of netdev_pick_tx
into __netdev_pick_tx") added a bug that disables caching of queue
index in the socket.

This is the source of packet reorders for TCP flows, and
again this is happening more often when using FQ pacing.

Old code was doing

if (queue_index != old_index)
sk_tx_queue_set(sk, queue_index);

Alexander renamed the variables but forgot to change sk_tx_queue_set()
2nd parameter.

if (queue_index != new_index)
sk_tx_queue_set(sk, queue_index);

This means we store -1 over and over in sk->sk_tx_queue_mapping

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Alexander Duyck <alexander.h.duyck@intel.com>
Acked-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agonet: sctp: fix smatch warning in sctp_send_asconf_del_ip
Daniel Borkmann [Sat, 7 Sep 2013 18:51:21 +0000]
net: sctp: fix smatch warning in sctp_send_asconf_del_ip

[ Upstream commit 88362ad8f9a6cea787420b57cc27ccacef000dbe ]

This was originally reported in [1] and posted by Neil Horman [2], he said:

  Fix up a missed null pointer check in the asconf code. If we don't find
  a local address, but we pass in an address length of more than 1, we may
  dereference a NULL laddr pointer. Currently this can't happen, as the only
  users of the function pass in the value 1 as the addrcnt parameter, but
  its not hot path, and it doesn't hurt to check for NULL should that ever
  be the case.

The callpath from sctp_asconf_mgmt() looks okay. But this could be triggered
from sctp_setsockopt_bindx() call with SCTP_BINDX_REM_ADDR and addrcnt > 1
while passing all possible addresses from the bind list to SCTP_BINDX_REM_ADDR
so that we do *not* find a single address in the association's bind address
list that is not in the packed array of addresses. If this happens when we
have an established association with ASCONF-capable peers, then we could get
a NULL pointer dereference as we only check for laddr == NULL && addrcnt == 1
and call later sctp_make_asconf_update_ip() with NULL laddr.

BUT: this actually won't happen as sctp_bindx_rem() will catch such a case
and return with an error earlier. As this is incredably unintuitive and error
prone, add a check to catch at least future bugs here. As Neil says, its not
hot path. Introduced by 8a07eb0a5 ("sctp: Add ASCONF operation on the
single-homed host").

 [1] http://www.spinics.net/lists/linux-sctp/msg02132.html
 [2] http://www.spinics.net/lists/linux-sctp/msg02133.html

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Cc: Michio Honda <micchie@sfc.wide.ad.jp>
Acked-By: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agonet: sctp: fix bug in sctp_poll for SOCK_SELECT_ERR_QUEUE
Daniel Borkmann [Sat, 7 Sep 2013 14:44:59 +0000]
net: sctp: fix bug in sctp_poll for SOCK_SELECT_ERR_QUEUE

[ Upstream commit a0fb05d1aef0f5df936f80b726d1b3bfd4275f95 ]

If we do not add braces around ...

  mask |= POLLERR |
          sock_flag(sk, SOCK_SELECT_ERR_QUEUE) ? POLLPRI : 0;

... then this condition always evaluates to true as POLLERR is
defined as 8 and binary or'd with whatever result comes out of
sock_flag(). Hence instead of (X | Y) ? A : B, transform it into
X | (Y ? A : B). Unfortunatelty, commit 8facd5fb73 ("net: fix
smatch warnings inside datagram_poll") forgot about SCTP. :-(

Introduced by 7d4c04fc170 ("net: add option to enable error queue
packets waking select").

Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Cc: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Acked-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agonet: fib: fib6_add: fix potential NULL pointer dereference
Daniel Borkmann [Sat, 7 Sep 2013 13:13:20 +0000]
net: fib: fib6_add: fix potential NULL pointer dereference

[ Upstream commit ae7b4e1f213aa659aedf9c6ecad0bf5f0476e1e2 ]

When the kernel is compiled with CONFIG_IPV6_SUBTREES, and we return
with an error in fn = fib6_add_1(), then error codes are encoded into
the return pointer e.g. ERR_PTR(-ENOENT). In such an error case, we
write the error code into err and jump to out, hence enter the if(err)
condition. Now, if CONFIG_IPV6_SUBTREES is enabled, we check for:

  if (pn != fn && pn->leaf == rt)
    ...
  if (pn != fn && !pn->leaf && !(pn->fn_flags & RTN_RTINFO))
    ...

Since pn is NULL and fn is f.e. ERR_PTR(-ENOENT), then pn != fn
evaluates to true and causes a NULL-pointer dereference on further
checks on pn. Fix it, by setting both NULL in error case, so that
pn != fn already evaluates to false and no further dereference
takes place.

This was first correctly implemented in 4a287eba2 ("IPv6 routing,
NLM_F_* flag support: REPLACE and EXCL flags support, warn about
missing CREATE flag"), but the bug got later on introduced by
188c517a0 ("ipv6: return errno pointers consistently for fib6_add_1()").

Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Cc: Lin Ming <mlin@ss.pku.edu.cn>
Cc: Matti Vaittinen <matti.vaittinen@nsn.com>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Acked-by: Matti Vaittinen <matti.vaittinen@nsn.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agoipv6/exthdrs: accept tlv which includes only padding
Jiri Pirko [Fri, 6 Sep 2013 14:02:25 +0000]
ipv6/exthdrs: accept tlv which includes only padding

[ Upstream commit 8112b1fe071be01a28a774ed55909e6f4b29712d ]

In rfc4942 and rfc2460 I cannot find anything which would implicate to
drop packets which have only padding in tlv.

Current behaviour breaks TAHI Test v6LC.1.2.6.

Problem was intruduced in:
9b905fe6843 "ipv6/exthdrs: strict Pad1 and PadN check"

Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agotcp: Add missing braces to do_tcp_setsockopt
Dave Jones [Thu, 5 Sep 2013 17:43:34 +0000]
tcp: Add missing braces to do_tcp_setsockopt

[ Upstream commit e2e5c4c07caf810d7849658dca42f598b3938e21 ]

Signed-off-by: Dave Jones <davej@fedoraproject.org>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agocaif: Add missing braces to multiline if in cfctrl_linkup_request
Dave Jones [Thu, 5 Sep 2013 04:11:19 +0000]
caif: Add missing braces to multiline if in cfctrl_linkup_request

[ Upstream commit 0c1db731bfcf3a9fd6c58132134f8b0f423552f0 ]

The indentation here implies this was meant to be a multi-line if.

Introduced several years back in commit c85c2951d4da1236e32f1858db418221e624aba5
("caif: Handle dev_queue_xmit errors.")

Signed-off-by: Dave Jones <davej@fedoraproject.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agoHID: fix unused rsize usage
Jiri Kosina [Mon, 22 Jul 2013 15:11:44 +0000]
HID: fix unused rsize usage

commit bc197eedef1ae082ec662c64c3f4aa302821fb7a upstream.

27ce4050 ("HID: fix data access in implement()") by mistake removed
a setting of buffer size in hidp. Fix that by putting it back.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agoHID: fix data access in implement()
Jiri Kosina [Wed, 10 Jul 2013 17:56:27 +0000]
HID: fix data access in implement()

commit 27ce405039bfe6d3f4143415c638f56a3df77dca upstream.

implement() is setting bytes in LE data stream. In case the data is not
aligned to 64bits, it reads past the allocated buffer. It doesn't really
change any value there (it's properly bitmasked), but in case that this
read past the boundary hits a page boundary, pagefault happens when
accessing 64bits of 'x' in implement(), and kernel oopses.

This happens much more often when numbered reports are in use, as the
initial 8bit skip in the buffer makes the whole process work on values
which are not aligned to 64bits.

This problem dates back to attempts in 2005 and 2006 to make implement()
and extract() as generic as possible, and even back then the problem
was realized by Adam Kroperlin, but falsely assumed to be impossible
to cause any harm:

  http://www.mail-archive.com/linux-usb-devel@lists.sourceforge.net/msg47690.html

I have made several attempts at fixing it "on the spot" directly in
implement(), but the results were horrible; the special casing for processing
last 64bit chunk and switching to different math makes it unreadable mess.

I therefore took a path to allocate a few bytes more which will never make
it into final report, but are there as a cushion for all the 64bit math
operations happening in implement() and extract().

All callers of hid_output_report() are converted at the same time to allocate
the buffer by newly introduced hid_alloc_report_buf() helper.

Bruno noticed that the whole raw_size test can be dropped as well, as
hid_alloc_report_buf() makes sure that the buffer is always of a proper
size.

Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agocciss: fix info leak in cciss_ioctl32_passthru()
Dan Carpenter [Tue, 24 Sep 2013 22:27:45 +0000]
cciss: fix info leak in cciss_ioctl32_passthru()

commit 58f09e00ae095e46ef9edfcf3a5fd9ccdfad065e upstream.

The arg64 struct has a hole after ->buf_size which isn't cleared.  Or if
any of the calls to copy_from_user() fail then that would cause an
information leak as well.

This was assigned CVE-2013-2147.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agocpqarray: fix info leak in ida_locked_ioctl()
Dan Carpenter [Tue, 24 Sep 2013 22:27:44 +0000]
cpqarray: fix info leak in ida_locked_ioctl()

commit 627aad1c01da6f881e7f98d71fd928ca0c316b1a upstream.

The pciinfo struct has a two byte hole after ->dev_fn so stack
information could be leaked to the user.

This was assigned CVE-2013-2147.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agomwifiex: fix memory corruption when unsetting multicast list
Daniel Drake [Fri, 14 Jun 2013 19:24:24 +0000]
mwifiex: fix memory corruption when unsetting multicast list

commit 6390d88529835a8ad3563fe01a5da89fa52d6db2 upstream.

When trying to unset a previously-set multicast list (i.e. the new list
has 0 entries), mwifiex_set_multicast_list() was calling down to
mwifiex_request_set_multicast_list() while leaving
mcast_list.num_multicast_addr as an uninitialized value.

We were arriving at mwifiex_cmd_mac_multicast_adr() which would then
proceed to do an often huge memcpy of
mcast_list.num_multicast_addr*ETH_ALEN bytes, causing memory corruption
and hard to debug crashes.

Fix this by setting mcast_list.num_multicast_addr to 0 when no multicast
list is provided. Similarly, fix up the logic in
mwifiex_request_set_multicast_list() to unset the multicast list that
was previously sent to the hardware in such cases.

Signed-off-by: Daniel Drake <dsd@laptop.org>
Acked-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agoLinux 3.10.15
Greg Kroah-Hartman [Sat, 5 Oct 2013 14:13:21 +0000]
Linux 3.10.15

5 years agodrm/i915: fix gen4 digital port hotplug definitions
Daniel Vetter [Fri, 26 Jul 2013 09:27:49 +0000]
drm/i915: fix gen4 digital port hotplug definitions

commit 0ce99f749b3834edeb500e17d6ad17e86b60ff83 upstream.

Apparently Bspec is wrong in this case here even for gm45. Note that
Bspec is horribly misguided on i965g/gm, so we don't have any other
data points besides that it seems to make machines work better.

With this changes all the bits in PORT_HOTPLUG_STAT for the digital
ports are ordered the same way. This seems to agree with what register
dumps from the hpd storm handling code shows, where the LIVE bit and
the short/long pulse STATUS bits light up at the same time with this
enumeration (but no with the one from Bspec).

Also tested on my gm45 which has two DP+ ports, and everything seems
to still work as expected.

References: http://www.mail-archive.com/intel-gfx@lists.freedesktop.org/msg23054.html
Cc: Egbert Eich <eich@suse.com>
Cc: Jan Niggemann <jn@hz6.de>
Tested-by: Jan Niggemann <jn@hz6.de>
[danvet: Add a big warning that Bspec seems to be wrong for these
bits, suggested by Jani.]
Acked-by: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agoALSA: compress: Fix compress device unregister.
Liam Girdwood [Fri, 13 Sep 2013 16:43:17 +0000]
ALSA: compress: Fix compress device unregister.

commit 4028b6c4c03f213260e9290ff3a6b5439aad07ce upstream.

snd_unregister_device() should return the device type and not stream
direction.

Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Tested-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agohwmon: (applesmc) Check key count before proceeding
Henrik Rydberg [Thu, 26 Sep 2013 06:33:16 +0000]
hwmon: (applesmc) Check key count before proceeding

commit 5f4513864304672e6ea9eac60583eeac32e679f2 upstream.

After reports from Chris and Josh Boyer of a rare crash in applesmc,
Guenter pointed at the initialization problem fixed below. The patch
has not been verified to fix the crash, but should be applied
regardless.

Reported-by: <jwboyer@fedoraproject.org>
Suggested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agoARM: mxs: stub out mxs_pm_init for !CONFIG_PM
Arnd Bergmann [Mon, 3 Jun 2013 14:00:22 +0000]
ARM: mxs: stub out mxs_pm_init for !CONFIG_PM

commit 7a9caf59f60e55a8caf96f856713bd0ef0cc25a7 upstream.

When building a kernel without CONFIG_PM, we get a link
error from referencing mxs_pm_init in the machine
descriptor. This defines a macro to NULL for that case.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agodrm/radeon: fix hdmi audio on DCE3.0/3.1 asics
Alex Deucher [Wed, 25 Sep 2013 16:04:37 +0000]
drm/radeon: fix hdmi audio on DCE3.0/3.1 asics

commit 58d327da9721f7a0f6e46c8dfa5cc5546fd7078a upstream.

These asics seem to use a mix of the DCE2.x and
DCE3.2 audio interfaces despite what the register spec
says.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=69729
https://bugs.freedesktop.org/show_bug.cgi?id=69671

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agodrm/radeon: add missing hdmi callbacks for rv6xx
Alex Deucher [Mon, 23 Sep 2013 19:47:08 +0000]
drm/radeon: add missing hdmi callbacks for rv6xx

commit 99d79aa2f3b7729e7290e8bda5d0dd8b0240ec62 upstream.

When dpm was merged, I added a new asic struct for
rv6xx, but it never got properly updated when the
hdmi callbacks were added due to the two patch sets
being developed in parallel.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=69729

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agodrm/radeon: disable tests/benchmarks if accel is disabled
Alex Deucher [Mon, 23 Sep 2013 14:38:26 +0000]
drm/radeon: disable tests/benchmarks if accel is disabled

commit 4a1132a023eb48cf10522d84c5908d43b612c041 upstream.

The tests are only usable if the acceleration engines have
been successfully initialized.

Based on an initial patch from: Alex Ivanov <gnidorah@p0n4ik.tk>

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agodrm/radeon: Make r100_cp_ring_info() and radeon_ring_gfx() safe (v2)
Alex Ivanov [Fri, 20 Sep 2013 13:36:06 +0000]
drm/radeon: Make r100_cp_ring_info() and radeon_ring_gfx() safe (v2)

commit 0eb3448aa6b31fbf24c31756aba7940cac5ad6b8 upstream.

Prevent NULL pointer dereference in case when radeon_ring_fini() did it's job.

Reading of r100_cp_ring_info and radeon_ring_gfx debugfs entries will lead to a KP if ring buffer was deallocated, e.g. on failed ring test.
Seen on PA-RISC machine having "radeon: ring test failed (scratch(0x8504)=0xCAFEDEAD)" issue.

v2: agd5f: add some parens around ring->ready check

Signed-off-by: Alex Ivanov <gnidorah@p0n4ik.tk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agodrm/radeon: avoid UVD corruption on AGP cards using GPU gart
Alex Deucher [Mon, 16 Sep 2013 03:23:07 +0000]
drm/radeon: avoid UVD corruption on AGP cards using GPU gart

commit 4ca5a6cba53e13b8fd153b0762b4128fab6a3cfb upstream.

If the user has forced the driver to use the internal GPU gart
rather than AGP on an AGP card, force the buffers to vram
as well.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agodrm/i915/dp: increase i2c-over-aux retry interval on AUX DEFER
Jani Nikula [Fri, 20 Sep 2013 13:42:15 +0000]
drm/i915/dp: increase i2c-over-aux retry interval on AUX DEFER

commit 8d16f258217f2f583af1fd57c5144aa4bbe73e48 upstream.

There is no clear cut rules or specs for the retry interval, as there
are many factors that affect overall response time. Increase the
interval, and even more so on branch devices which may have limited i2c
bit rates.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reference: https://bugs.freedesktop.org/show_bug.cgi?id=60263
Tested-by: Nicolas Suzor <nic@suzor.com>
Reviewed-by: Todd Previte <tprevite@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agodrm/i915: preserve pipe A quirk in i9xx_set_pipeconf
Daniel Vetter [Tue, 24 Sep 2013 09:46:14 +0000]
drm/i915: preserve pipe A quirk in i9xx_set_pipeconf

commit 67c72a12254101d4e8d9b9f3a02646ba0be84a2d upstream.

This regression has been introduced in

commit 9f11a9e4e50006b615ba94722dfc33ced89664cf
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Thu Jun 13 00:54:58 2013 +0200

    drm/i915: set up PIPECONF explicitly for i9xx/vlv platforms

Ville brough up the idea that this is just the pipe A quirk gone
wrong.

Note that after resume the bios might or might not have enabled pipe A
already.  We have a bit of magic to make sure that on resume we set up
a decent mode for pipe A, but I fear if I just smash pipe A to always
on we'd enable it in a bogus state and hang the hw. Hence the
readback.

v2: Clarify the logic a bit as suggested by Chris. Also amend the
commit message to clarify why we don't unconditionally enable the
pipe.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=66462
References: https://lkml.org/lkml/2013/8/26/238
Cc: Meelis Roos <mroos@ut.ee>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: Use |= instead of = as suggested by Chris.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agodm-raid: silence compiler warning on rebuilds_per_group.
NeilBrown [Thu, 9 May 2013 00:27:49 +0000]
dm-raid: silence compiler warning on rebuilds_per_group.

commit 3f6bbd3ffd7b733dd705e494663e5761aa2cb9c1 upstream.

This doesn't really need to be initialised, but it doesn't hurt,
silences the compiler, and as it is a counter it makes sense for it to
start at zero.

Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agodm mpath: disable WRITE SAME if it fails
Mike Snitzer [Thu, 19 Sep 2013 16:13:58 +0000]
dm mpath: disable WRITE SAME if it fails

commit f84cb8a46a771f36a04a02c61ea635c968ed5f6a upstream.

Workaround the SCSI layer's problematic WRITE SAME heuristics by
disabling WRITE SAME in the DM multipath device's queue_limits if an
underlying device disabled it.

The WRITE SAME heuristics, with both the original commit 5db44863b6eb
("[SCSI] sd: Implement support for WRITE SAME") and the updated commit
66c28f971 ("[SCSI] sd: Update WRITE SAME heuristics"), default to enabling
WRITE SAME(10) even without successfully determining it is supported.
After the first failed WRITE SAME the SCSI layer will disable WRITE SAME
for the device (by setting sdkp->device->no_write_same which results in
'max_write_same_sectors' in device's queue_limits to be set to 0).

When a device is stacked ontop of such a SCSI device any changes to that
SCSI device's queue_limits do not automatically propagate up the stack.
As such, a DM multipath device will not have its WRITE SAME support
disabled.  This causes the block layer to continue to issue WRITE SAME
requests to the mpath device which causes paths to fail and (if mpath IO
isn't configured to queue when no paths are available) it will result in
actual IO errors to the upper layers.

This fix doesn't help configurations that have additional devices
stacked ontop of the mpath device (e.g. LVM created linear DM devices
ontop).  A proper fix that restacks all the queue_limits from the bottom
of the device stack up will need to be explored if SCSI will continue to
use this model of optimistically allowing op codes and then disabling
them after they fail for the first time.

Before this patch:

EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null)
device-mapper: multipath: XXX snitm debugging: got -EREMOTEIO (-121)
device-mapper: multipath: XXX snitm debugging: failing WRITE SAME IO with error=-121
end_request: critical target error, dev dm-6, sector 528
dm-6: WRITE SAME failed. Manually zeroing.
device-mapper: multipath: Failing path 8:112.
end_request: I/O error, dev dm-6, sector 4616
dm-6: WRITE SAME failed. Manually zeroing.
end_request: I/O error, dev dm-6, sector 4616
end_request: I/O error, dev dm-6, sector 5640
end_request: I/O error, dev dm-6, sector 6664
end_request: I/O error, dev dm-6, sector 7688
end_request: I/O error, dev dm-6, sector 524288
Buffer I/O error on device dm-6, logical block 65536
lost page write due to I/O error on dm-6
JBD2: Error -5 detected when updating journal superblock for dm-6-8.
end_request: I/O error, dev dm-6, sector 524296
Aborting journal on device dm-6-8.
end_request: I/O error, dev dm-6, sector 524288
Buffer I/O error on device dm-6, logical block 65536
lost page write due to I/O error on dm-6
JBD2: Error -5 detected when updating journal superblock for dm-6-8.

# cat /sys/block/sdh/queue/write_same_max_bytes
0
# cat /sys/block/dm-6/queue/write_same_max_bytes
33553920

After this patch:

EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null)
device-mapper: multipath: XXX snitm debugging: got -EREMOTEIO (-121)
device-mapper: multipath: XXX snitm debugging: WRITE SAME I/O failed with error=-121
end_request: critical target error, dev dm-6, sector 528
dm-6: WRITE SAME failed. Manually zeroing.

# cat /sys/block/sdh/queue/write_same_max_bytes
0
# cat /sys/block/dm-6/queue/write_same_max_bytes
0

It should be noted that WRITE SAME support wasn't enabled in DM
multipath until v3.10.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agodm-snapshot: fix performance degradation due to small hash size
Mikulas Patocka [Wed, 18 Sep 2013 23:40:42 +0000]
dm-snapshot: fix performance degradation due to small hash size

commit 60e356f381954d79088d0455e357db48cfdd6857 upstream.

LVM2, since version 2.02.96, creates origin with zero size, then loads
the snapshot driver and then loads the origin.  Consequently, the
snapshot driver sees the origin size zero and sets the hash size to the
lower bound 64.  Such small hash table causes performance degradation.

This patch changes it so that the hash size is determined by the size of
snapshot volume, not minimum of origin and snapshot size.  It doesn't
make sense to set the snapshot size significantly larger than the origin
size, so we do not need to take origin size into account when
calculating the hash size.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agodm snapshot: workaround for a false positive lockdep warning
Mikulas Patocka [Wed, 18 Sep 2013 23:14:22 +0000]
dm snapshot: workaround for a false positive lockdep warning

commit 5ea330a75bd86b2b2a01d7b85c516983238306fb upstream.

The kernel reports a lockdep warning if a snapshot is invalidated because
it runs out of space.

The lockdep warning was triggered by commit 0976dfc1d0cd80a4e9dfaf87bd87
("workqueue: Catch more locking problems with flush_work()") in v3.5.

The warning is false positive.  The real cause for the warning is that
the lockdep engine treats different instances of md->lock as a single
lock.

This patch is a workaround - we use flush_workqueue instead of flush_work.
This code path is not performance sensitive (it is called only on
initialization or invalidation), thus it doesn't matter that we flush the
whole workqueue.

The real fix for the problem would be to teach the lockdep engine to treat
different instances of md->lock as separate locks.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Acked-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agodriver core : Fix use after free of dev->parent in device_shutdown
Benson Leung [Wed, 25 Sep 2013 03:05:11 +0000]
driver core : Fix use after free of dev->parent in device_shutdown

commit f123db8e9d6c84c863cb3c44d17e61995dc984fb upstream.

The put_device(dev) at the bottom of the loop of device_shutdown
may result in the dev being cleaned up. In device_create_release,
the dev is kfreed.

However, device_shutdown attempts to use the dev pointer again after
put_device by referring to dev->parent.

Copy the parent pointer instead to avoid this condition.

This bug was found on Chromium OS's chromeos-3.8, which is based on v3.8.11.
See bug report : https://code.google.com/p/chromium/issues/detail?id=297842
This can easily be reproduced when shutting down with
hidraw devices that report battery condition.
Two examples are the HP Bluetooth Mouse X4000b and the Apple Magic Mouse.
For example, with the magic mouse :
The dev in question is "hidraw0"
dev->parent is "magicmouse"

In the course of the shutdown for this device, the input event cleanup calls
a put on hidraw0, decrementing its reference count.
When we finally get to put_device(dev) in device_shutdown, kobject_cleanup
is called and device_create_release does kfree(dev).
dev->parent is no longer valid, and we may crash in
put_device(dev->parent).

This change should be applied on any kernel with this change :
d1c6c030fcec6f860d9bb6c632a3ebe62e28440b

Signed-off-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agousb/core/devio.c: Don't reject control message to endpoint with wrong direction bit
Kurt Garloff [Tue, 24 Sep 2013 12:13:48 +0000]
usb/core/devio.c: Don't reject control message to endpoint with wrong direction bit

commit 831abf76643555a99b80a3b54adfa7e4fa0a3259 upstream.

Trying to read data from the Pegasus Technologies NoteTaker (0e20:0101)
[1] with the Windows App (EasyNote) works natively but fails when
Windows is running under KVM (and the USB device handed to KVM).

The reason is a USB control message
 usb 4-2.2: control urb: bRequestType=22 bRequest=09 wValue=0200 wIndex=0001 wLength=0008
This goes to endpoint address 0x01 (wIndex); however, endpoint address
0x01 does not exist. There is an endpoint 0x81 though (same number,
but other direction); the app may have meant that endpoint instead.

The kernel thus rejects the IO and thus we see the failure.

Apparently, Linux is more strict here than Windows ... we can't change
the Win app easily, so that's a problem.

It seems that the Win app/driver is buggy here and the driver does not
behave fully according to the USB HID class spec that it claims to
belong to.  The device seems to happily deal with that though (and
seems to not really care about this value much).

So the question is whether the Linux kernel should filter here.
Rejecting has the risk that somewhat non-compliant userspace apps/
drivers (most likely in a virtual machine) are prevented from working.
Not rejecting has the risk of confusing an overly sensitive device with
such a transfer. Given the fact that Windows does not filter it makes
this risk rather small though.

The patch makes the kernel more tolerant: If the endpoint address in
wIndex does not exist, but an endpoint with toggled direction bit does,
it will let the transfer through. (It does NOT change the message.)

With attached patch, the app in Windows in KVM works.
 usb 4-2.2: check_ctrlrecip: process 13073 (qemu-kvm) requesting ep 01 but needs 81

I suspect this will mostly affect apps in virtual environments; as on
Linux the apps would have been adapted to the stricter handling of the
kernel. I have done that for mine[2].

[1] http://www.pegatech.com/
[2] https://sourceforge.net/projects/notetakerpen/

Signed-off-by: Kurt Garloff <kurt@garloff.de>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agousb: dwc3: add support for Merrifield
David Cohen [Thu, 26 Sep 2013 20:01:44 +0000]
usb: dwc3: add support for Merrifield

commit 85601f8cf67c56a561a6dd5e130e65fdc179047d upstream.

Add PCI id for Intel Merrifield

Signed-off-by: David Cohen <david.a.cohen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agousb: dwc3: pci: add support for BayTrail
Heikki Krogerus [Tue, 17 Sep 2013 07:38:13 +0000]
usb: dwc3: pci: add support for BayTrail

commit b62cd96de3161dfb125a769030eec35a4cab3d3a upstream.

Add PCI id for Intel BayTrail.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agofsl/usb: Resolve PHY_CLK_VLD instability issue for ULPI phy
Ramneek Mehresh [Mon, 16 Sep 2013 09:41:33 +0000]
fsl/usb: Resolve PHY_CLK_VLD instability issue for ULPI phy

commit ad1260e9fbf768d6bed227d9604ebee76a84aae3 upstream.

For controller versions greater than 1.6, setting ULPI_PHY_CLK_SEL
bit when USB_EN bit is already set causes instability issues with
PHY_CLK_VLD bit. So USB_EN is set only for IP controller version
below 1.6 before setting ULPI_PHY_CLK_SEL bit

Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agoUSB: Fix breakage in ffs_fs_mount()
Al Viro [Fri, 20 Sep 2013 16:14:21 +0000]
USB: Fix breakage in ffs_fs_mount()

commit 2606b28aabd7dea1766c23a105e1124c95409c96 upstream.

There's a bunch of failure exits in ffs_fs_mount() with
seriously broken recovery logics.  Most of that appears to stem
from misunderstanding of the ->kill_sb() semantics; unlike
->put_super() it is called for *all* superblocks of given type,
no matter how (in)complete the setup had been.  ->put_super()
is called only if ->s_root is not NULL; any failure prior to
setting ->s_root will have the call of ->put_super() skipped.
->kill_sb(), OTOH, awaits every superblock that has come from
sget().

Current behaviour of ffs_fs_mount():

We have struct ffs_sb_fill_data data on stack there.  We do
ffs_dev = functionfs_acquire_dev_callback(dev_name);
and store that in data.private_data.  Then we call mount_nodev(),
passing it ffs_sb_fill() as a callback.  That will either fail
outright, or manage to call ffs_sb_fill().  There we allocate an
instance of struct ffs_data, slap the value of ffs_dev (picked
from data.private_data) into ffs->private_data and overwrite
data.private_data by storing ffs into an overlapping member
(data.ffs_data).  Then we store ffs into sb->s_fs_info and attempt
to set the rest of the things up (root inode, root dentry, then
create /ep0 there).  Any of those might fail.  Should that
happen, we get ffs_fs_kill_sb() called before mount_nodev()
returns.  If mount_nodev() fails for any reason whatsoever,
we proceed to
functionfs_release_dev_callback(data.ffs_data);

That's broken in a lot of ways.  Suppose the thing has failed in
allocation of e.g. root inode or dentry.  We have
functionfs_release_dev_callback(ffs);
ffs_data_put(ffs);
done by ffs_fs_kill_sb() (ffs accessed via sb->s_fs_info), followed by
functionfs_release_dev_callback(ffs);
from ffs_fs_mount() (via data.ffs_data).  Note that the second
functionfs_release_dev_callback() has every chance to be done to freed memory.

Suppose we fail *before* root inode allocation.  What happens then?
ffs_fs_kill_sb() doesn't do anything to ffs (it's either not called at all,
or it doesn't have a pointer to ffs stored in sb->s_fs_info).  And
functionfs_release_dev_callback(data.ffs_data);
is called by ffs_fs_mount(), but here we are in nasal daemon country - we
are reading from a member of union we'd never stored into.  In practice,
we'll get what we used to store into the overlapping field, i.e. ffs_dev.
And then we get screwed, since we treat it (struct gfs_ffs_obj * in
disguise, returned by functionfs_acquire_dev_callback()) as struct
ffs_data *, pick what would've been ffs_data ->private_data from it
(*well* past the actual end of the struct gfs_ffs_obj - struct ffs_data
is much bigger) and poke in whatever it points to.

FWIW, there's a minor leak on top of all that in case if ffs_sb_fill()
fails on kstrdup() - ffs is obviously forgotten.

The thing is, there is no point in playing all those games with union.
Just allocate and initialize ffs_data *before* calling mount_nodev() and
pass a pointer to it via data.ffs_data.  And once it's stored in
sb->s_fs_info, clear data.ffs_data, so that ffs_fs_mount() knows that
it doesn't need to kill the sucker manually - from that point on
we'll have it done by ->kill_sb().

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agoUSB: UHCI: accept very late isochronous URBs
Alan Stern [Tue, 24 Sep 2013 19:47:20 +0000]
USB: UHCI: accept very late isochronous URBs

commit bef073b067a7b1874a6b381e0035bb0516d71a77 upstream.

Commit 24f531371de1 (USB: EHCI: accept very late isochronous URBs)
changed the isochronous API provided by ehci-hcd.  URBs submitted too
late, so that the time slots for all their packets have already
expired, are no longer rejected outright.  Instead the submission is
accepted, and the URB completes normally with a -EXDEV error for each
packet.  This is what client drivers expect.

This patch implements the same policy in uhci-hcd.  It should be
applied to all kernels containing commit c44b225077bb (UHCI: implement
new semantics for URB_ISO_ASAP).

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agoUSB: OHCI: accept very late isochronous URBs
Alan Stern [Tue, 24 Sep 2013 19:46:45 +0000]
USB: OHCI: accept very late isochronous URBs

commit a8693424c751b8247ee19bd8b857f1d4f432b972 upstream.

Commit 24f531371de1 (USB: EHCI: accept very late isochronous URBs)
changed the isochronous API provided by ehci-hcd.  URBs submitted too
late, so that the time slots for all their packets have already
expired, are no longer rejected outright.  Instead the submission is
accepted, and the URB completes normally with a -EXDEV error for each
packet.  This is what client drivers expect.

This patch implements the same policy in ohci-hcd.  The change is more
complicated than it was in ehci-hcd, because ohci-hcd doesn't scan for
isochronous completions in the same way as ehci-hcd does.  Rather, it
depends on the hardware adding completed TDs to a "done queue".  Some
OHCI controller don't handle this properly when a TD's time slot has
already expired, so we have to avoid adding such TDs to the schedule
in the first place.  As a result, if the URB was submitted too late
then none of its TDs will get put on the schedule, so none of them
will end up on the done queue, so the driver will never realize that
the URB should be completed.

To solve this problem, the patch adds one to urb_priv->td_cnt for such
URBs, making it larger than urb_priv->length (td_cnt already gets set
to the number of TD's that had to be skipped because their slots have
expired).  Each time an URB is given back, the finish_urb() routine
looks to see if urb_priv->td_cnt for the next URB on the same endpoint
is marked in this way.  If so, it gives back the next URB right away.

This should be applied to all kernels containing commit 815fa7b91761
(USB: OHCI: fix logic for scheduling isochronous URBs).

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agoxhci: Fix race between ep halt and URB cancellation
Florian Wolter [Wed, 14 Aug 2013 08:33:16 +0000]
xhci: Fix race between ep halt and URB cancellation

commit 526867c3ca0caa2e3e846cb993b0f961c33c2abb upstream.

The halted state of a endpoint cannot be cleared over CLEAR_HALT from a
user process, because the stopped_td variable was overwritten in the
handle_stopped_endpoint() function. So the xhci_endpoint_reset() function will
refuse the reset and communication with device can not run over this endpoint.
https://bugzilla.kernel.org/show_bug.cgi?id=60699

Signed-off-by: Florian Wolter <wolly84@web.de>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: Jonghwan Choi <jhbird.choi@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agoUSB: fix PM config symbol in uhci-hcd, ehci-hcd, and xhci-hcd
Alan Stern [Tue, 24 Sep 2013 19:45:25 +0000]
USB: fix PM config symbol in uhci-hcd, ehci-hcd, and xhci-hcd

commit f875fdbf344b9fde207f66b392c40845dd7e5aa6 upstream.

Since uhci-hcd, ehci-hcd, and xhci-hcd support runtime PM, the .pm
field in their pci_driver structures should be protected by CONFIG_PM
rather than CONFIG_PM_SLEEP.  The corresponding change has already
been made for ohci-hcd.

Without this change, controllers won't do runtime suspend if system
suspend or hibernation isn't enabled.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agoxhci: Fix oops happening after address device timeout
Mathias Nyman [Thu, 5 Sep 2013 08:01:20 +0000]
xhci: Fix oops happening after address device timeout

commit 284d20552461466b04d6bfeafeb1c47a8891b591 upstream.

When a command times out, the command ring is first aborted,
and then stopped. If the command ring is empty when it is stopped
the stop event will point to next command which is not yet set.
xHCI tries to handle this next event often causing an oops.

Don't handle command completion events on stopped cmd ring if ring is
empty.

This patch should be backported to kernels as old as 3.7, that contain
the commit b92cc66c047ff7cf587b318fe377061a353c120f "xHCI: add aborting
command ring function"

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Reported-by: Giovanni <giovanni.nervi@yahoo.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agoxhci: Ensure a command structure points to the correct trb on the command ring
Mathias Nyman [Fri, 30 Aug 2013 15:25:49 +0000]
xhci: Ensure a command structure points to the correct trb on the command ring

commit ec7e43e2d98173483866fe2e4e690143626b659c upstream.

If a command on the command ring needs to be cancelled before it is handled
it can be turned to a no-op operation when the ring is stopped.
We want to store the command ring enqueue pointer in the command structure
when the command in enqueued for the cancellation case.

Some commands used to store the command ring dequeue pointers instead of enqueue
(these often worked because enqueue happends to equal dequeue quite often)

Other commands correctly used the enqueue pointer but did not check if it pointed
to a valid trb or a link trb, this caused for example stop endpoint command to timeout in
xhci_stop_device() in about 2% of suspend/resume cases.

This should also solve some weird behavior happening in command cancellation cases.

This patch is based on a patch submitted by Sarah Sharp to linux-usb, but
then forgotten:
    http://marc.info/?l=linux-usb&m=136269803207465&w=2

This patch should be backported to kernels as old as 3.7, that contain
the commit b92cc66c047ff7cf587b318fe377061a353c120f "xHCI: add aborting
command ring function"

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agodrm/i915/tv: clear adjusted_mode.flags
Daniel Vetter [Tue, 10 Sep 2013 09:44:30 +0000]
drm/i915/tv: clear adjusted_mode.flags

commit 1062b81598bc00e2f6620e6f3788f8f8df2f01e7 upstream.

The native TV encoder has it's own flags to adjust sync modes and
enabled interlaced modes which are totally irrelevant for the adjusted
mode. This worked out nicely since the input modes used by both the
load detect code and reported in the ->get_modes callbacks all have no
flags set, and we also don't fill out any of them in the ->get_config
callback.

This changed with the additional sanitation done with

commit 2960bc9cceecb5d556ce1c07656a6609e2f7e8b0
Author: Imre Deak <imre.deak@intel.com>
Date:   Tue Jul 30 13:36:32 2013 +0300

    drm/i915: make user mode sync polarity setting explicit

sinc now the "no flags at all" state wouldn't fit through core code
any more. So fix this up again by explicitly clearing the flags in the
->compute_config callback.

Aside: We have zero checking in place to make sure that the requested
mode is indeed the right input mode we want for the selected TV mode.
So we'll happily fall over if userspace tries to pull us.  But that's
definitely work for a different patch series. So just add a FIXME
comment for now.

Reported-by: Knut Petersen <Knut_Petersen@t-online.de>
Cc: Knut Petersen <Knut_Petersen@t-online.de>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Knut Petersen <Knut_Petersen@t-online.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agostaging: vt6656: [BUG] iwctl_siwencodeext return if device not open
Malcolm Priestley [Mon, 23 Sep 2013 19:30:42 +0000]
staging: vt6656: [BUG] iwctl_siwencodeext return if device not open

commit 5e8c3d3e41b0bf241e830a1ee0752405adecc050 upstream.

Don't allow entry to iwctl_siwencodeext if device not open.

This fixes a race condition where wpa supplicant/network manager
enters the function when the device is already closed.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agostaging: vt6656: [BUG] main_usb.c oops on device_close move flag earlier.
Malcolm Priestley [Sun, 22 Sep 2013 18:48:54 +0000]
staging: vt6656: [BUG] main_usb.c oops on device_close move flag earlier.

commit e3eb270fab7734427dd8171a93e4946fe28674bc upstream.

The vt6656 is prone to resetting on the usb bus.

It seems there is a race condition and wpa supplicant is
trying to open the device via iw_handlers before its actually
closed at a stage that the buffers are being removed.

The device is longer considered open when the
buffers are being removed. So move ~DEVICE_FLAGS_OPENED
flag to before freeing the device buffers.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agoARM: 7837/3: fix Thumb-2 bug in AES assembler code
Ard Biesheuvel [Sat, 21 Sep 2013 10:23:50 +0000]
ARM: 7837/3: fix Thumb-2 bug in AES assembler code

commit 40190c85f427dcfdbab5dbef4ffd2510d649da1f upstream.

Patch 638591c enabled building the AES assembler code in Thumb2 mode.
However, this code used arithmetic involving PC rather than adr{l}
instructions to generate PC-relative references to the lookup tables,
and this needs to take into account the different PC offset when
running in Thumb mode.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agoserial: pch_uart: fix tty-kref leak in dma-rx path
Johan Hovold [Tue, 10 Sep 2013 10:50:50 +0000]
serial: pch_uart: fix tty-kref leak in dma-rx path

commit 19b85cfb190eb9980eaf416bff96aef4159a430e upstream.

Fix tty_kref leak when tty_buffer_request room fails in dma-rx path.

Note that the tty ref isn't really needed anymore, but as the leak has
always been there, fixing it before removing should makes it easier to
backport the fix.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agoserial: pch_uart: fix tty-kref leak in rx-error path
Johan Hovold [Tue, 10 Sep 2013 10:50:49 +0000]
serial: pch_uart: fix tty-kref leak in rx-error path

commit fc0919c68cb2f75bb1af759315f9d7e2a9443c28 upstream.

Fix tty-kref leak introduced by commit 384e301e ("pch_uart: fix a
deadlock when pch_uart as console") which never put its tty reference.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agoserial: tegra: fix tty-kref leak
Johan Hovold [Tue, 10 Sep 2013 10:50:48 +0000]
serial: tegra: fix tty-kref leak

commit cfd29aa0e81b791985e8428e6507e80e074e6730 upstream.

Fix potential tty-kref leak in stop_rx path.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agotty: Fix SIGTTOU not sent with tcflush()
Peter Hurley [Thu, 26 Sep 2013 00:13:04 +0000]
tty: Fix SIGTTOU not sent with tcflush()

commit 5cec7bf699c61d14f0538345076480bb8c8ebfbb upstream.

Commit 'e7f3880cd9b98c5bf9391ae7acdec82b75403776'
  tty: Fix recursive deadlock in tty_perform_flush()
introduced a regression where tcflush() does not generate
SIGTTOU for background process groups.

Make sure ioctl(TCFLSH) calls tty_check_change() when
invoked from the line discipline.

Reported-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agomei: cancel stall timers in mei_reset
Alexander Usyskin [Mon, 2 Sep 2013 10:29:47 +0000]
mei: cancel stall timers in mei_reset

commit 4a704575cc1afb3b848f096778fa9b8d7b3d5813 upstream.

Unset init_clients_timer and amthif_stall_timers
in mei_reset in order to cancel timer ticking and hence
avoid recursive reset calls.

Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agomei: bus: stop wait for read during cl state transition
Tomas Winkler [Mon, 2 Sep 2013 10:29:46 +0000]
mei: bus: stop wait for read during cl state transition

commit e2b31644e999e8bfe3efce880fb32840299abf41 upstream.

Bus layer omitted check for client state transition while waiting
for read completion
The client state transition may occur for example as result
of firmware initiated reset

Add mei_cl_is_transitioning wrapper to reduce the code
repetition.:

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agomei: make me client counters less error prone
Tomas Winkler [Mon, 2 Sep 2013 10:29:45 +0000]
mei: make me client counters less error prone

commit 1aee351a739153529fbb98ee461777b2abd5e1c9 upstream.

1. u8 counters are prone to hard to detect overflow:
 make them unsigned long to match bit_ functions argument type

2. don't check me_clients_num for negativity, it is unsigned.

3. init all the me client counters from one place

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agox86, efi: Don't map Boot Services on i386
Josh Boyer [Thu, 18 Apr 2013 14:51:34 +0000]
x86, efi: Don't map Boot Services on i386

commit 700870119f49084da004ab588ea2b799689efaf7 upstream.

Add patch to fix 32bit EFI service mapping (rhbz 726701)

Multiple people are reporting hitting the following WARNING on i386,

  WARNING: at arch/x86/mm/ioremap.c:102 __ioremap_caller+0x3d3/0x440()
  Modules linked in:
  Pid: 0, comm: swapper Not tainted 3.9.0-rc7+ #95
  Call Trace:
   [<c102b6af>] warn_slowpath_common+0x5f/0x80
   [<c1023fb3>] ? __ioremap_caller+0x3d3/0x440
   [<c1023fb3>] ? __ioremap_caller+0x3d3/0x440
   [<c102b6ed>] warn_slowpath_null+0x1d/0x20
   [<c1023fb3>] __ioremap_caller+0x3d3/0x440
   [<c106007b>] ? get_usage_chars+0xfb/0x110
   [<c102d937>] ? vprintk_emit+0x147/0x480
   [<c1418593>] ? efi_enter_virtual_mode+0x1e4/0x3de
   [<c102406a>] ioremap_cache+0x1a/0x20
   [<c1418593>] ? efi_enter_virtual_mode+0x1e4/0x3de
   [<c1418593>] efi_enter_virtual_mode+0x1e4/0x3de
   [<c1407984>] start_kernel+0x286/0x2f4
   [<c1407535>] ? repair_env_string+0x51/0x51
   [<c1407362>] i386_start_kernel+0x12c/0x12f

Due to the workaround described in commit 916f676f8 ("x86, efi: Retain
boot service code until after switching to virtual mode") EFI Boot
Service regions are mapped for a period during boot. Unfortunately, with
the limited size of the i386 direct kernel map it's possible that some
of the Boot Service regions will not be directly accessible, which
causes them to be ioremap()'d, triggering the above warning as the
regions are marked as E820_RAM in the e820 memmap.

There are currently only two situations where we need to map EFI Boot
Service regions,

  1. To workaround the firmware bug described in 916f676f8
  2. To access the ACPI BGRT image

but since we haven't seen an i386 implementation that requires either,
this simple fix should suffice for now.

[ Added to changelog - Matt ]

Reported-by: Bryan O'Donoghue <bryan.odonoghue.lkml@nexus-software.ie>
Acked-by: Tom Zanussi <tom.zanussi@intel.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Josh Boyer <jwboyer@redhat.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agotools lib lk: Uninclude linux/magic.h in debugfs.c
Vinson Lee [Wed, 18 Sep 2013 23:16:40 +0000]
tools lib lk: Uninclude linux/magic.h in debugfs.c

commit ce7eebe5c3deef8e19c177c24ee75843256e69ca upstream.

The compilation only looks for linux/magic.h from the default include
paths, which does not include the source tree. This results in a build
error if linux/magic.h is not available or not installed.

For example, this build error occurs on CentOS 5.

$ make -C tools/lib/lk V=1
[...]
gcc -o debugfs.o -c -ggdb3 -Wall -Wextra -std=gnu99 -Werror -O6
-D_FORTIFY_SOURCE=2 -Wbad-function-cast -Wdeclaration-after-statement
-Wformat-security -Wformat-y2k -Winit-self -Wmissing-declarations
-Wmissing-prototypes -Wnested-externs -Wno-system-headers
-Wold-style-definition -Wpacked -Wredundant-decls -Wshadow
-Wstrict-aliasing=3 -Wstrict-prototypes -Wswitch-default -Wswitch-enum
-Wundef -Wwrite-strings -Wformat  -fPIC  -D_LARGEFILE64_SOURCE
-D_FILE_OFFSET_BITS=64 debugfs.c
debugfs.c:8:25: error: linux/magic.h: No such file or directory

The only symbol from linux/magic.h needed by debugfs.c is DEBUGFS_MAGIC,
and that is already defined in debugfs.h. linux/magic.h isn't providing
any extra symbols and can unincluded. This is similar to the approach by
perf, which has its own magic.h wrapper at
tools/perf/util/include/linux/magic.h

Signed-off-by: Vinson Lee <vlee@twitter.com>
Acked-by: Borislav Petkov <bp@suse.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Vinson Lee <vlee@freedesktop.org>
Link: http://lkml.kernel.org/r/1379546200-17028-1-git-send-email-vlee@freedesktop.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agox86/reboot: Add quirk to make Dell C6100 use reboot=pci automatically
Masoud Sharbiani [Fri, 20 Sep 2013 22:59:07 +0000]
x86/reboot: Add quirk to make Dell C6100 use reboot=pci automatically

commit 4f0acd31c31f03ba42494c8baf6c0465150e2621 upstream.

Dell PowerEdge C6100 machines fail to completely reboot about 20% of the time.

Signed-off-by: Masoud Sharbiani <msharbiani@twitter.com>
Signed-off-by: Vinson Lee <vlee@twitter.com>
Cc: Robin Holt <holt@sgi.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Link: http://lkml.kernel.org/r/1379717947-18042-1-git-send-email-vlee@freedesktop.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agobcache: Fix flushes in writeback mode
Kent Overstreet [Tue, 24 Sep 2013 06:17:36 +0000]
bcache: Fix flushes in writeback mode

commit c0f04d88e46d14de51f4baebb6efafb7d59e9f96 upstream.

In writeback mode, when we get a cache flush we need to make sure we
issue a flush to the backing device.

The code for sending down an extra flush was wrong - by cloning the bio
we were probably getting flags that didn't make sense for a bare flush,
and also the old code was firing for FUA bios, for which we don't need
to send a flush to the backing device.

This was causing data corruption somehow - the mechanism was never
determined, but this patch fixes it for the users that were seeing it.

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agobcache: Fix for handling overlapping extents when reading in a btree node
Kent Overstreet [Tue, 24 Sep 2013 06:17:35 +0000]
bcache: Fix for handling overlapping extents when reading in a btree node

commit 84786438ed17978d72eeced580ab757e4da8830b upstream.

btree_sort_fixup() was overly clever, because it was trying to avoid
pulling a key off the btree iterator in more than one place.

This led to a really obscure bug where we'd break early from the loop in
btree_sort_fixup() if the current key overlapped with keys in more than
one older set, and the next key it overlapped with was zero size.

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agobcache: Fix a shrinker deadlock
Kent Overstreet [Tue, 24 Sep 2013 06:17:34 +0000]
bcache: Fix a shrinker deadlock

commit a698e08c82dfb9771e0bac12c7337c706d729b6d upstream.

GFP_NOIO means we could be getting called recursively - mca_alloc() ->
mca_data_alloc() - definitely can't use mutex_lock(bucket_lock) then.
Whoops.

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agobcache: Fix a dumb CPU spinning bug in writeback
Kent Overstreet [Tue, 24 Sep 2013 06:17:33 +0000]
bcache: Fix a dumb CPU spinning bug in writeback

commit 79e3dab90d9f826ceca67c7890e048ac9169de49 upstream.

schedule_timeout() != schedule_timeout_uninterruptible()

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agobcache: Fix a flush/fua performance bug
Kent Overstreet [Tue, 24 Sep 2013 06:17:32 +0000]
bcache: Fix a flush/fua performance bug

commit 1394d6761b6e9e15ee7c632a6d48791188727b40 upstream.

bch_journal_meta() was missing the flush to make the journal write
actually go down (instead of waiting up to journal_delay_ms)...

Whoops

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agobcache: Fix a writeback performance regression
Kent Overstreet [Tue, 24 Sep 2013 06:17:31 +0000]
bcache: Fix a writeback performance regression

commit c2a4f3183a1248f615a695fbd8905da55ad11bba upstream.

Background writeback works by scanning the btree for dirty data and
adding those keys into a fixed size buffer, then for each dirty key in
the keybuf writing it to the backing device.

When read_dirty() finishes and it's time to scan for more dirty data, we
need to wait for the outstanding writeback IO to finish - they still
take up slots in the keybuf (so that foreground writes can check for
them to avoid races) - without that wait, we'll continually rescan when
we'll be able to add at most a key or two to the keybuf, and that takes
locks that starves foreground IO.  Doh.

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agobcache: Fix for when no journal entries are found
Kent Overstreet [Tue, 24 Sep 2013 06:17:29 +0000]
bcache: Fix for when no journal entries are found

commit c426c4fd46f709ade2bddd51c5738729c7ae1db5 upstream.

The journal replay code didn't handle this case, causing it to go into
an infinite loop...

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agobcache: Strip endline when writing the label through sysfs
Gabriel de Perthuis [Tue, 24 Sep 2013 06:17:28 +0000]
bcache: Strip endline when writing the label through sysfs

commit aee6f1cfff3ce240eb4b43b41ca466b907acbd2e upstream.

sysfs attributes with unusual characters have crappy failure modes
in Squeeze (udev 164); later versions of udev are unaffected.

This should make these characters more unusual.

Signed-off-by: Gabriel de Perthuis <g2p.code@gmail.com>
Signed-off-by: Kent Overstreet <kmo@daterainc.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agobcache: Fix a dumb journal discard bug
Kent Overstreet [Tue, 24 Sep 2013 06:17:27 +0000]
bcache: Fix a dumb journal discard bug

commit 6d9d21e35fbfa2934339e96934f862d118abac23 upstream.

That switch statement was obviously wrong, leading to some sort of weird
spinning on rare occasion with discards enabled...

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agosysv: Add forgotten superblock lock init for v7 fs
Lubomir Rintel [Wed, 18 Sep 2013 10:39:16 +0000]
sysv: Add forgotten superblock lock init for v7 fs

commit 49475555848d396a0c78fb2f8ecceb3f3f263ef1 upstream.

Superblock lock was replaced with (un)lock_super() removal, but left
uninitialized for Seventh Edition UNIX filesystem in the following commit (3.7):
c07cb01 sysv: drop lock/unlock super

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agoblock: Fix bio_copy_data()
Kent Overstreet [Tue, 24 Sep 2013 06:17:26 +0000]
block: Fix bio_copy_data()

commit 2f6cf0de0281d210061ce976f2d42d246adc75bb upstream.

The memcpy() in bio_copy_data() was using the wrong offset vars, leading
to data corruption in weird unusual setups.

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agoLinux 3.10.14
Greg Kroah-Hartman [Tue, 1 Oct 2013 16:18:05 +0000]
Linux 3.10.14

5 years agonetfilter: ipset: Fix serious failure in CIDR tracking
Oliver Smith [Mon, 16 Sep 2013 18:30:57 +0000]
netfilter: ipset: Fix serious failure in CIDR tracking

commit 2cf55125c64d64cc106e204d53b107094762dfdf upstream.

This fixes a serious bug affecting all hash types with a net element -
specifically, if a CIDR value is deleted such that none of the same size
exist any more, all larger (less-specific) values will then fail to
match. Adding back any prefix with a CIDR equal to or more specific than
the one deleted will fix it.

Steps to reproduce:
ipset -N test hash:net
ipset -A test 1.1.0.0/16
ipset -A test 2.2.2.0/24
ipset -T test 1.1.1.1           #1.1.1.1 IS in set
ipset -D test 2.2.2.0/24
ipset -T test 1.1.1.1           #1.1.1.1 IS NOT in set

This is due to the fact that the nets counter was unconditionally
decremented prior to the iteration that shifts up the entries. Now, we
first check if there is a proceeding entry and if not, decrement it and
return. Otherwise, we proceed to iterate and then zero the last element,
which, in most cases, will already be zero.

Signed-off-by: Oliver Smith <oliver@8.c.9.b.0.7.4.0.1.0.0.2.ip6.arpa>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agorpc: let xdr layer allocate gssproxy receieve pages
J. Bruce Fields [Fri, 23 Aug 2013 21:26:28 +0000]
rpc: let xdr layer allocate gssproxy receieve pages

commit d4a516560fc96a9d486a9939bcb567e3fdce8f49 upstream.

In theory the linux cred in a gssproxy reply can include up to
NGROUPS_MAX data, 256K of data.  In the common case we expect it to be
shorter.  So do as the nfsv3 ACL code does and let the xdr code allocate
the pages as they come in, instead of allocating a lot of pages that
won't typically be used.

Tested-by: Simo Sorce <simo@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agorpc: fix huge kmalloc's in gss-proxy
J. Bruce Fields [Tue, 20 Aug 2013 22:13:27 +0000]
rpc: fix huge kmalloc's in gss-proxy

commit 9dfd87da1aeb0fd364167ad199f40fe96a6a87be upstream.

The reply to a gssproxy can include up to NGROUPS_MAX gid's, which will
take up more than a page.  We therefore need to allocate an array of
pages to hold the reply instead of trying to allocate a single huge
buffer.

Tested-by: Simo Sorce <simo@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 years agorpc: comment on linux_cred encoding, treat all as unsigned
J. Bruce Fields [Fri, 23 Aug 2013 15:17:53 +0000]
rpc: comment on linux_cred encoding, treat all as unsigned

commit 6a36978e6931e6601be586eb313375335f2cfaa3 upstream.

The encoding of linux creds is a bit confusing.

Also: I think in practice it doesn't really matter whether we treat any
of these things as signed or unsigned, but unsigned seems more
straightforward: uid_t/gid_t are unsigned and it simplifies the ngroups
overflow check.

Tested-by: Simo Sorce <simo@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>