8 years agodlm: Remove superfluous call to recalc_sigpending()
Matt Fleming [Thu, 24 Mar 2011 13:56:47 +0000]
dlm: Remove superfluous call to recalc_sigpending()

recalc_sigpending() is called within sigprocmask(), so there is no
need call it again after sigprocmask() has returned.

Signed-off-by: Matt Fleming <matt.fleming@linux.intel.com>
Signed-off-by: David Teigland <teigland@redhat.com>

8 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6
Linus Torvalds [Mon, 28 Mar 2011 03:37:50 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/lrg/voltage-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6:
  regulator: Add MODULE_DEVICE_TABLE to max8997 and max8998
  regulator: fix tps6524x section mismatch
  regulator: Remove more wm831x-specific IRQ operations
  regulator: add ab8500 enable and raise time delays
  regulator: provide consumer interface for fall/rise time
  regulator: add set_voltage_time_sel infrastructure
  regulator: initialization for ab8500 regulators
  regulator: add support for USB voltage regulator
  regulator: switch the ab3100 to use enable_time()
  Regulator: add suspend-finish API for regulator core.
  regulator: fix typo in Kconfig
  regulator: Convert WM831x regulators to genirq
  regulator: If we fail when setting up a supply say which supply

8 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
Linus Torvalds [Mon, 28 Mar 2011 03:35:07 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: Fix yet another race in disconnection
  ALSA: asihpi - Update verbose debug print macros
  ALSA: asihpi - Improve non-busmaster adapter operation
  ALSA: asihpi - Support single-rate no-SRC cards
  ALSA: HDA: New AD1984A model for Dell Precision R5500
  ALSA: vmalloc buffers should use normal mmap
  ALSA: hda - Fix SPDIF out regression on ALC889
  ALSA: usb-audio - Support for Boss JS-8 Jam Station
  ALSA: usb-audio: add Cakewalk UM-1G support
  sound/oss/opl3: validate voice and channel indexes
  sound/oss: remove offset from load_patch callbacks

8 years agoMerge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6
Linus Torvalds [Mon, 28 Mar 2011 03:07:01 +0000]
Merge branch 'for-next' of git://git./linux/kernel/git/sameo/mfd-2.6

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6:
  mfd: Clean up max8997 IRQ namespace
  mfd: Fold irq_set_chip/irq_set_handler
  mfd: Cleanup irq namespace
  mfd: twl6030: Cleanup interrupt handling
  mfd: twl4030: Cleanup interrupt handling
  mfd: mx8925: Remove irq_desc leftovers
  mfd: htc-i2cpld: Cleanup interrupt handling
  mfd: htc-egpio: Cleanup interrupt handling
  mfd: ezx-pcap: Remvove open coded irq handling
  mfd: 88pm860x: Remove unused irq_desc leftovers
  mfd: asic3: Cleanup irq handling
  mfd: Select MFD_CORE if TPS6105X driver is configured
  mfd: Add MODULE_DEVICE_TABLE to rdc321x-southbridge
  mfd: Add MAX8997/8966 IRQ control
  mfd: Constify i2c_device_id tables
  mfd: OLPC: Clean up names to match what OLPC actually uses
  mfd: Add mfd_clone_cell(), convert cs5535-mfd/olpc-xo1 to it

8 years agoMerge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groec...
Linus Torvalds [Mon, 28 Mar 2011 03:03:39 +0000]
Merge branch 'hwmon-for-linus' of git://git./linux/kernel/git/groeck/staging

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging:
  hwmon: (pmbus) Fix temperature limit register access

8 years agoMerge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Mon, 28 Mar 2011 03:03:12 +0000]
Merge branch 'omap-fixes-for-linus' of git://git./linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6:
  hwspinlock: depend on OMAP4
  ARM: OMAP2+: Fix warnings for GPMC interrupt
  OMAP4: PandaBoard: remove unused power regulators
  arm: mach-omap2: omap_l3_smx: fix irq handler setup
  arm: mach-omap2: devices: fix omap3_l3_init() return value

8 years agoMerge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
Linus Torvalds [Mon, 28 Mar 2011 03:02:45 +0000]
Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  staging: Fix bdops->check_events() misconversion in cyasblkdev_block.c
  ide: ensure that we re-run the queue handler

8 years agoMerge branch 'for-2.6.39/drivers' of git://git.kernel.dk/linux-2.6-block
Linus Torvalds [Mon, 28 Mar 2011 03:02:07 +0000]
Merge branch 'for-2.6.39/drivers' of git://git.kernel.dk/linux-2.6-block

* 'for-2.6.39/drivers' of git://git.kernel.dk/linux-2.6-block: (122 commits)
  cciss: fix lost command issue
  drbd: need include for bitops functions declarations
  Revert "cciss: Add missing allocation in scsi_cmd_stack_setup and  corresponding deallocation"
  cciss: fix missed command status value CMD_UNABORTABLE
  cciss: remove unnecessary casts
  cciss: Mask off error bits of c->busaddr in cmd_special_free when calling pci_free_consistent
  cciss: Inform controller we are using 32-bit tags.
  cciss: hoist tag masking out of loop
  cciss: Add missing allocation in scsi_cmd_stack_setup and  corresponding deallocation
  cciss: export resettable host attribute
  drbd: drop code present under #ifdef which is relevant to 2.6.28 and below
  drbd: Fixed handling of read errors on a 'VerifyS' node
  drbd: Fixed handling of read errors on a 'VerifyT' node
  drbd: Implemented real timeout checking for request processing time
  drbd: Remove unused function atodb_endio()
  drbd: improve log message if received sector offset exceeds local capacity
  drbd: kill dead code
  drbd: don't BUG_ON, if bio_add_page of a single page to an empty bio fails
  drbd: Removed left over, now wrong comments
  drbd: serialize admin requests for new verify run with pending bitmap io
  ...

8 years agoMerge branch 'docs-next' of git://git.lwn.net/linux-2.6
Linus Torvalds [Mon, 28 Mar 2011 02:46:59 +0000]
Merge branch 'docs-next' of git://git.lwn.net/linux-2.6

* 'docs-next' of git://git.lwn.net/linux-2.6:
  docs: update the development process document
  docs: fix dev_debug() braino in dynamic-debug-howto.txt

8 years agoMerge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelv...
Linus Torvalds [Mon, 28 Mar 2011 02:42:12 +0000]
Merge branch 'hwmon-for-linus' of git://git./linux/kernel/git/jdelvare/staging

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  hwmon: (f71882fg) Add support for the F71889A
  hwmon: (f71882fg) Add support for the F81865F
  hwmon: (f71882fg) Document all supported devices
  hwmon: (f71882fg) Per-chip fan/temperature input count tables
  hwmon: (f71882fg) Secure chip property definition arrays

8 years agoMerge branch 'for-linus-1' of git://git.infradead.org/mtd-2.6
Linus Torvalds [Mon, 28 Mar 2011 02:40:56 +0000]
Merge branch 'for-linus-1' of git://git.infradead.org/mtd-2.6

* 'for-linus-1' of git://git.infradead.org/mtd-2.6: (49 commits)
  mtd: mtdswap: fix compilation warning
  mtdswap: kill strict error handling option
  mtd: nand: enable software BCH ECC in nand simulator
  mtd: nand: add software BCH ECC support
  mtd: fix printf format warnings, mostly lack of %zd for size_t, in mtdswap
  mtd: sm_rtl: check kmalloc return value
  mtd: cfi: add support for AMIC flashes (e.g. A29L160AT)
  lib: add shared BCH ECC library
  mtd: mxc_nand: fix OOB corruption when page size > 2KiB
  mtd: DaVinci: Removed header file that is not required
  mtd: pxa3xx_nand: clean the keep configure code
  mtd: pxa3xx_nand: mtd scan id process could be defined by driver itself
  mtd: pxa3xx_nand: unify prepare command
  mtd: pxa3xx_nand: discard wait_for_event,write_cmd,__readid function
  mtd: pxa3xx_nand: rework irq logic
  mtd: pxa3xx_nand: make scan procedure more clear
  mtd: speedtest: fix integer overflow
  mtd: mxc_nand: fix read past buffer end
  mtd: omap3: nand: report corrected ecc errors
  jffs2: remove a trailing white space in commentaries
  ...

8 years agoapm: orphan the driver
Stephen Rothwell [Sat, 26 Mar 2011 06:22:04 +0000]
apm: orphan the driver

I no longer have access to any hardware that uses APM and have not
provided real maintenance for several years.  Hopefully someone with the
hardware or energy will step forward if the driver is to be kept.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoum: Add myself as co-maintainer
Richard Weinberger [Sat, 26 Mar 2011 19:48:57 +0000]
um: Add myself as co-maintainer

Signed-off-by: Richard Weinberger <richard@nod.at>
Acked-and-appreciated-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agodocbook: fix rapidio warning
Randy Dunlap [Sat, 26 Mar 2011 20:27:54 +0000]
docbook: fix rapidio warning

Fix fsl_rio.c kernel-doc warning: no exported symbols as
requested by !E are found:

  Warning(arch/powerpc/sysdev/fsl_rio.c): no structured comments found

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agodocbook: fix broken media build
Randy Dunlap [Sat, 26 Mar 2011 20:28:00 +0000]
docbook: fix broken media build

DocBook/v4l/ no longer has any *.png files, so the 'cp' command fails,
breaking the build.  Drop the *.png cp.

  cp: cannot stat `linux-2.6.38-git18/Documentation/DocBook/v4l/*.png': No such file or directory

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agofs: fix inode.c kernel-doc warning
Randy Dunlap [Sat, 26 Mar 2011 20:27:47 +0000]
fs: fix inode.c kernel-doc warning

Fix inode.c kernel-doc fatal error: 2 comment sections have the same name:

  Error(fs/inode.c:1171): duplicate section name 'Note'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoipc: fix util.c kernel-doc warnings
Randy Dunlap [Sat, 26 Mar 2011 20:27:41 +0000]
ipc: fix util.c kernel-doc warnings

Fix ipc/util.c kernel-doc warnings:

  Warning(ipc/util.c:336): No description found for parameter 'ns'
  Warning(ipc/util.c:620): No description found for parameter 'ns'
  Warning(ipc/util.c:790): No description found for parameter 'ns'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Reviewed-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agomm: fix memory.c incorrect kernel-doc
Randy Dunlap [Sat, 26 Mar 2011 20:27:01 +0000]
mm: fix memory.c incorrect kernel-doc

Fix mm/memory.c incorrect kernel-doc function notation:

  Warning(mm/memory.c:3718): Cannot understand  * @access_remote_vm - access another process' address space
   on line 3718 - I thought it was a doc line

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agopercpu: Omit segment prefix in the UP case for cmpxchg_double
Christoph Lameter [Sun, 27 Mar 2011 01:57:18 +0000]
percpu: Omit segment prefix in the UP case for cmpxchg_double

Omit the segment prefix in the UP case. GS is not used then
and we will generate segfaults if cmpxchg16b is used otherwise.

Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoproc: fix oops on invalid /proc/<pid>/maps access
Linus Torvalds [Mon, 28 Mar 2011 02:09:29 +0000]
proc: fix oops on invalid /proc/<pid>/maps access

When m_start returns an error, the seq_file logic will still call m_stop
with that error entry, so we'd better make sure that we check it before
using it as a vma.

Introduced by commit ec6fd8a4355c ("report errors in /proc/*/*map*
sanely"), which replaced NULL with various ERR_PTR() cases.

(On ia64, you happen to get a unaligned fault instead of a page fault,
since the address used is generally some random error code like -EPERM)

Reported-by: Anca Emanuel <anca.emanuel@gmail.com>
Reported-by: Tony Luck <tony.luck@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Américo Wang <xiyou.wangcong@gmail.com>
Cc: Stephen Wilson <wilsons@start.ca>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoregulator: Add MODULE_DEVICE_TABLE to max8997 and max8998
Axel Lin [Sat, 26 Mar 2011 15:28:42 +0000]
regulator: Add MODULE_DEVICE_TABLE to max8997 and max8998

The device table is required to load modules based on modaliases.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Cc: MyungJoo Ham <myungjoo.ham@smasung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>

8 years agomfd: Clean up max8997 IRQ namespace
Samuel Ortiz [Fri, 25 Mar 2011 16:56:02 +0000]
mfd: Clean up max8997 IRQ namespace

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

8 years agomfd: Fold irq_set_chip/irq_set_handler
Thomas Gleixner [Fri, 25 Mar 2011 11:12:35 +0000]
mfd: Fold irq_set_chip/irq_set_handler

Use the combined irq_set_chip_and_handler() function
instead. Converted with coccinelle.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

8 years agomfd: Cleanup irq namespace
Thomas Gleixner [Fri, 25 Mar 2011 11:12:32 +0000]
mfd: Cleanup irq namespace

Converted with coccinelle.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

8 years agomfd: twl6030: Cleanup interrupt handling
Thomas Gleixner [Fri, 25 Mar 2011 11:12:31 +0000]
mfd: twl6030: Cleanup interrupt handling

irq_desc checking in the interrupt demux routine is totally
pointless. The driver sets those lines up, so that cant go away
magically.

Remove the open coded handler magic and use the proper accessor.

This driver needs to be converted to threaded interrupts and buslock.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

8 years agomfd: twl4030: Cleanup interrupt handling
Thomas Gleixner [Fri, 25 Mar 2011 11:12:31 +0000]
mfd: twl4030: Cleanup interrupt handling

irq_desc checking in a function which is called with that irq
descriptor locked, is pointless. Equally pointless as the irq desc
check in the interrupt service routine. The driver sets those lines
up, so that cant go away magically.

Remove the open coded handler magic and use the proper accessor.

No need to fiddle with irq_desc in the type setting function. The
original value is in irq_data and the core code stores the new setting
when the return value is 0.

This driver needs to be converted to threaded interrupts and buslock.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

8 years agomfd: mx8925: Remove irq_desc leftovers
Thomas Gleixner [Fri, 25 Mar 2011 11:12:30 +0000]
mfd: mx8925: Remove irq_desc leftovers

Remove unused code.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

8 years agomfd: htc-i2cpld: Cleanup interrupt handling
Thomas Gleixner [Fri, 25 Mar 2011 11:12:29 +0000]
mfd: htc-i2cpld: Cleanup interrupt handling

Remove the pointless irq_desc check in set_type. This function is
called with that irq descriptor locked. Also remove the write back of
the flow type as the core code does this already when the return value
is 0.

Also store the flow type in the chip data structure, so there is no
need to fiddle in the irq descriptor.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

8 years agomfd: htc-egpio: Cleanup interrupt handling
Thomas Gleixner [Fri, 25 Mar 2011 11:12:28 +0000]
mfd: htc-egpio: Cleanup interrupt handling

Replace the open coded handler call with the prober accessor. Retrieve
the handler data from desc. That avoids a redundant lookup in the
sparse irq case.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

8 years agomfd: ezx-pcap: Remvove open coded irq handling
Thomas Gleixner [Fri, 25 Mar 2011 11:12:27 +0000]
mfd: ezx-pcap: Remvove open coded irq handling

There is no point in checking irq_desc here, as it _is_ available. The
driver configured those lines, so they cannot go away.

The home brewn disabled/note_interrupt magic can be removed as well by
adding a irq_disable callback which avoids the lazy disable.

That driver needs to be converted to threaded interrupts.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

8 years agomfd: 88pm860x: Remove unused irq_desc leftovers
Thomas Gleixner [Fri, 25 Mar 2011 11:12:27 +0000]
mfd: 88pm860x: Remove unused irq_desc leftovers

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

8 years agomfd: asic3: Cleanup irq handling
Thomas Gleixner [Fri, 25 Mar 2011 11:12:26 +0000]
mfd: asic3: Cleanup irq handling

Remove the open coded access to irq_desc and use the proper wrappers.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

8 years agomfd: Select MFD_CORE if TPS6105X driver is configured
Guenter Roeck [Thu, 24 Mar 2011 19:12:47 +0000]
mfd: Select MFD_CORE if TPS6105X driver is configured

The TPS61050/61052 driver uses MFD core code, yet does not specify the
dependency in Kconfig. If it is the only MFD driver configured, compilation
fails with

ERROR: "mfd_add_devices" [drivers/mfd/tps6105x.ko] undefined!
ERROR: "mfd_remove_devices" [drivers/mfd/tps6105x.ko] undefined!

Fix the problem by adding "select MFD_CORE" to the respective Kconfig entry.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

8 years agomfd: Add MODULE_DEVICE_TABLE to rdc321x-southbridge
Axel Lin [Thu, 24 Mar 2011 07:04:53 +0000]
mfd: Add MODULE_DEVICE_TABLE to rdc321x-southbridge

The device table is required to load modules based on modaliases.
After adding MODULE_DEVICE_TABLE, below entry will be added to modules.pcimap:
rdc321x-southbridge  0x000017f3 0x00006030 0xffffffff 0xffffffff 0x00000000 0x00000000 0x0

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

8 years agomfd: Add MAX8997/8966 IRQ control
MyungJoo Ham [Thu, 24 Mar 2011 06:54:45 +0000]
mfd: Add MAX8997/8966 IRQ control

This patch enables IRQ handling for MAX8997/8966 chips.

Please note that Fuel-Gauge-related IRQs are not implemented in this
initial release. The fuel gauge module in MAX8997 is identical to
MAX17042, which is already in Linux kernel. In order to use the
already-existing MAX17042 driver for fuel gauge module in MAX8997, the
main interrupt handler of MAX8997 should relay related interrupts to
MAX17042 driver. However, in order to do this, we need to modify
MAX17042 driver as well because MAX17042 driver does not have any
interrupt handlers for now. We are not going to implement this in this
initial release as it is not crucial in basic operations of MAX8997.

Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

8 years agomfd: Constify i2c_device_id tables
Axel Lin [Wed, 23 Mar 2011 12:54:17 +0000]
mfd: Constify i2c_device_id tables

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Harald Welte <laforge@gnumonks.org>
Cc: Matti Aaltonen <matti.j.aaltonen@nokia.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

8 years agomfd: OLPC: Clean up names to match what OLPC actually uses
Daniel Drake [Tue, 22 Mar 2011 20:50:39 +0000]
mfd: OLPC: Clean up names to match what OLPC actually uses

The cs5535-pms cell doesn't actually need to be cloned, so we can drop that
and simply have the olpc-xo1.c driver use "cs5535-pms" directly.

Also, rename the cs5535-acpi clones to what we actually use for the (currently
out-of-tree) SCI driver.  In the process, that fixes a subtle bug in
olpc-xo1.c which broke powerdown on XO-1s.. olpc-xo1-ac-acpi was a typo, not
something that actually existed.

Signed-off-by: Daniel Drake <dsd@laptop.org>
Signed-off-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

8 years agomfd: Add mfd_clone_cell(), convert cs5535-mfd/olpc-xo1 to it
Andres Salomon [Tue, 22 Mar 2011 02:19:35 +0000]
mfd: Add mfd_clone_cell(), convert cs5535-mfd/olpc-xo1 to it

Replace mfd_shared_platform_driver_register with mfd_clone_cell.  The
former was called by an mfd client, and registered both a platform driver
and device.  The latter is called by an mfd driver, and registers only a
platform device.

The downside of this is that mfd drivers need to be modified whenever
new clients are added that share a cell; the upside is that it fits
Linux's driver model better.  It's also simpler.

This also converts cs5535-mfd/olpc-xo1 from the old API.  cs5535-mfd
now creates the olpc-xo1-{acpi,pms} devices, while olpc-xo1 binds to
them via platform drivers.

Signed-off-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

8 years agostaging: Fix bdops->check_events() misconversion in cyasblkdev_block.c
Tejun Heo [Sat, 26 Mar 2011 18:52:59 +0000]
staging: Fix bdops->check_events() misconversion in cyasblkdev_block.c

Commit cafb0bfca1 (staging: Convert to bdops->check_events())
incorrectly set bd->user_disk_0->events while initializing
bd->user_disk_1.  Fix it.

The problem was spotted by Milton's suspect code pattern detector.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

8 years agoide: ensure that we re-run the queue handler
Jens Axboe [Sat, 26 Mar 2011 18:49:54 +0000]
ide: ensure that we re-run the queue handler

The conversion to blk_delay_queue() missed parts of IDE.
Add a blk_delay_queue() to ensure that the request handler
gets reinvoked when it needs to.

Note that in all but one place the old plug re-run delay of
3 msecs is used, even though it probably could be shorter
for performance reasons in some of those cases.

Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

8 years agohwmon: (pmbus) Fix temperature limit register access
Guenter Roeck [Tue, 22 Mar 2011 04:31:00 +0000]
hwmon: (pmbus) Fix temperature limit register access

Commit 8677011 added auto-update to temperature limit registers.
Unfortunately, the update flag is also used to determine if an attribute
is writable, which results in read-only temperature limit registers.
To fix the problem, pass 'readonly' as separate flag to the function used
to add sensor attributes.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>

8 years agoregulator: fix tps6524x section mismatch
Randy Dunlap [Thu, 24 Mar 2011 20:30:59 +0000]
regulator: fix tps6524x section mismatch

Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

Fix section mismatch that is caused by init code calling exit code:
pmic_remove() cannot be marked as __devexit.

WARNING: drivers/regulator/tps6524x-regulator.o(.devinit.text+0x205): Section mismatch in reference from the function pmic_probe() to the function .devexit.text:pmic_remove()
The function __devinit pmic_probe() references
a function __devexit pmic_remove().
This is often seen when error handling in the init function
uses functionality in the exit path.
The fix is often to remove the __devexit annotation of
pmic_remove() so it may be used outside an exit section.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Liam Girdwood <lrg@slimlogic.co.uk>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Cyril Chemparathy <cyril@ti.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>

8 years agoregulator: Remove more wm831x-specific IRQ operations
Mark Brown [Fri, 18 Mar 2011 12:43:35 +0000]
regulator: Remove more wm831x-specific IRQ operations

These are the last users in the tree.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>

8 years agoregulator: add ab8500 enable and raise time delays
Linus Walleij [Thu, 17 Mar 2011 12:25:02 +0000]
regulator: add ab8500 enable and raise time delays

This uses the new infrastructure to provide proper delays when
enabling or setting the voltage of one specific regulator.

Cc: Bengt Jonsson <bengt.g.jonsson@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>

8 years agoregulator: provide consumer interface for fall/rise time
Linus Walleij [Thu, 17 Mar 2011 12:24:52 +0000]
regulator: provide consumer interface for fall/rise time

This exposes the functionality for rise/fall fime when setting
voltage to the consumers.

Cc: Bengt Jonsson <bengt.g.jonsson@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>

8 years agoregulator: add set_voltage_time_sel infrastructure
Linus Walleij [Thu, 17 Mar 2011 12:24:36 +0000]
regulator: add set_voltage_time_sel infrastructure

This makes it possible to set the stabilization time for voltage
regulators in the same manner as enable_time(). The interface
only supports regulators that implements fixed selectors.

Cc: Bengt Jonsson <bengt.g.jonsson@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>

8 years agoregulator: initialization for ab8500 regulators
Bengt Jonsson [Fri, 11 Mar 2011 10:54:46 +0000]
regulator: initialization for ab8500 regulators

The regulators on the AB8500 have a lot of custom
hardware control settings pertaining to 8 external
signals, settings which are board-specific and need
be provided from the platform at startup.

Initialization added for regulators Vana, VextSupply1,
VextSupply2, VextSupply3, Vaux1, Vaux2, Vaux3, VTVout,
Vintcore12, Vaudio, Vdmic, Vamic1, Vamic2, VrefDDR.

Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com>
Reviewed-by: Rickard Andersson <rickard.andersson@stericsson.com>
Reviewed-by: Jonas Aberg <jonas.aberg@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>

8 years agoregulator: add support for USB voltage regulator
Bengt Jonsson [Thu, 10 Mar 2011 13:43:31 +0000]
regulator: add support for USB voltage regulator

Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>

8 years agoregulator: switch the ab3100 to use enable_time()
Linus Walleij [Fri, 11 Mar 2011 15:26:18 +0000]
regulator: switch the ab3100 to use enable_time()

Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

This switches the ab3100 core to use the enable_time()
infrastructure from the regulator core.

Cc: Mattias Wallin <mattias.wallin@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>

8 years agoRegulator: add suspend-finish API for regulator core.
MyungJoo Ham [Fri, 11 Mar 2011 01:13:59 +0000]
Regulator: add suspend-finish API for regulator core.

The regulator core had suspend-prepare that turns off the regulators
when entering a system-wide suspend. However, it did not have
suspend-finish that pairs with suspend-prepare and the regulator core
has assumed that the regulator devices and their drivers support
autonomous recover at resume.

This patch adds regulator_suspend_finish that pairs with the
previously-existed regulator_suspend_prepare. The function
regulator_suspend_finish turns on the regulators that have always_on set
or positive use_count so that we can reset the regulator states
appropriately at resume.

In regulator_suspend_finish, if has_full_constraints, it disables
unnecessary regulators.

Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
--
Updates
v3
comments corrected (Thanks to Igor)
v2
disable unnecessary regulators (Thanks to Mark)
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>

8 years agoregulator: fix typo in Kconfig
Igor Grinberg [Tue, 1 Mar 2011 09:54:44 +0000]
regulator: fix typo in Kconfig

Fix typo: s/TPS695x0/TPS659x0/

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>

8 years agoregulator: Convert WM831x regulators to genirq
Mark Brown [Tue, 1 Mar 2011 16:50:43 +0000]
regulator: Convert WM831x regulators to genirq

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>

8 years agoregulator: If we fail when setting up a supply say which supply
Mark Brown [Thu, 24 Feb 2011 17:39:09 +0000]
regulator: If we fail when setting up a supply say which supply

Makes it a bit easier to identify if it's a problem with the supplies,
the usual error would be omitting the supply name entirely.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>

8 years agohwmon: (f71882fg) Add support for the F71889A
Hans de Goede [Sat, 26 Mar 2011 09:45:02 +0000]
hwmon: (f71882fg) Add support for the F71889A

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

8 years agohwmon: (f71882fg) Add support for the F81865F
Jean Delvare [Sat, 26 Mar 2011 09:45:02 +0000]
hwmon: (f71882fg) Add support for the F81865F

Add support for the Fintek F81865F. It's essentially compatible with
the F71882FG, but has fewer inputs: 7 voltage, 2 temperature and 2 fan
inputs only.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>

8 years agohwmon: (f71882fg) Document all supported devices
Jean Delvare [Sat, 26 Mar 2011 09:45:02 +0000]
hwmon: (f71882fg) Document all supported devices

The list of supported devices was not always well documented in all
places. Clarify and list all devices in documentation, Kconfig and
the driver itself.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>

8 years agohwmon: (f71882fg) Per-chip fan/temperature input count tables
Jean Delvare [Sat, 26 Mar 2011 09:45:01 +0000]
hwmon: (f71882fg) Per-chip fan/temperature input count tables

Use tables to list the count of fan and temperature inputs for all
supported chips, almost similar to (but more simple than) what is
already done for voltage inputs. This avoids repeating the same tests
in different functions, and will make it easier to add support for
chips with a different count of fan or temperature inputs.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>

8 years agohwmon: (f71882fg) Secure chip property definition arrays
Jean Delvare [Sat, 26 Mar 2011 09:45:01 +0000]
hwmon: (f71882fg) Secure chip property definition arrays

Using C99-style array initialization will ensure definitions won't
drift if the chips enum gets new values added.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>

8 years agoMerge branch 'syscore' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspen...
Linus Torvalds [Sat, 26 Mar 2011 04:07:59 +0000]
Merge branch 'syscore' of git://git./linux/kernel/git/rafael/suspend-2.6

* 'syscore' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
  Introduce ARCH_NO_SYSDEV_OPS config option (v2)
  cpufreq: Use syscore_ops for boot CPU suspend/resume (v2)
  KVM: Use syscore_ops instead of sysdev class and sysdev
  PCI / Intel IOMMU: Use syscore_ops instead of sysdev class and sysdev
  timekeeping: Use syscore_ops instead of sysdev class and sysdev
  x86: Use syscore_ops instead of sysdev classes and sysdevs

8 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland...
Linus Torvalds [Sat, 26 Mar 2011 04:06:37 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/roland/infiniband

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  RDMA/nes: Fix test of uninitialized netdev

8 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
Linus Torvalds [Sat, 26 Mar 2011 04:06:13 +0000]
Merge git://git./linux/kernel/git/jejb/scsi-misc-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (55 commits)
  [SCSI] tcm_loop: Add multi-fabric Linux/SCSI LLD fabric module
  [SCSI] qla4xxx: Use polling mode for disable interrupt mailbox completion
  [SCSI] Revert "[SCSI] Retrieve the Caching mode page"
  [SCSI] bnx2fc: IO completion not processed due to missed wakeup
  [SCSI] qla4xxx: Update driver version to 5.02.00-k6
  [SCSI] qla4xxx: masking required bits of add_fw_options during initialization
  [SCSI] qla4xxx: added new function qla4xxx_relogin_all_devices
  [SCSI] qla4xxx: add support for ql4xsess_recovery_tmo cmd line param
  [SCSI] qla4xxx: Add support for ql4xmaxqdepth command line parameter
  [SCSI] qla4xxx: cleanup function qla4xxx_process_ddb_changed
  [SCSI] qla4xxx: Prevent other port reinitialization during remove_adapter
  [SCSI] qla4xxx: remove unused ddb flag DF_NO_RELOGIN
  [SCSI] qla4xxx: cleanup DDB relogin logic during initialization
  [SCSI] qla4xxx: Do not retry ISP82XX initialization if H/W state is failed
  [SCSI] qla4xxx: Do not send mbox command if FW is in failed state
  [SCSI] qla4xxx: cleanup qla4xxx_initialize_ddb_list()
  [SCSI] ses: add subenclosure support
  [SCSI] bnx2fc: Bump version to 1.0.1
  [SCSI] bnx2fc: Remove unnecessary module state checks
  [SCSI] bnx2fc: Fix MTU issue by using static MTU
  ...

8 years agoMerge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel...
Linus Torvalds [Sat, 26 Mar 2011 04:04:56 +0000]
Merge branch 'for_linus' of git://git./linux/kernel/git/jwessel/linux-2.6-kgdb

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb:
  kdb: add usage string of 'per_cpu' command
  kgdb,x86_64: fix compile warning found with sparse
  kdb: code cleanup to use macro instead of value
  kgdboc,kgdbts: strlen() doesn't count the terminator

8 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Sat, 26 Mar 2011 04:02:22 +0000]
Merge git://git./linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (56 commits)
  route: Take the right src and dst addresses in ip_route_newports
  ipv4: Fix nexthop caching wrt. scoping.
  ipv4: Invalidate nexthop cache nh_saddr more correctly.
  net: fix pch_gbe section mismatch warning
  ipv4: fix fib metrics
  mlx4_en: Removing HW info from ethtool -i report.
  net_sched: fix THROTTLED/RUNNING race
  drivers/net/a2065.c: Convert release_resource to release_region/release_mem_region
  drivers/net/ariadne.c: Convert release_resource to release_region/release_mem_region
  bonding: fix rx_handler locking
  myri10ge: fix rmmod crash
  mlx4_en: updated driver version to 1.5.4.1
  mlx4_en: Using blue flame support
  mlx4_core: reserve UARs for userspace consumers
  mlx4_core: maintain available field in bitmap allocator
  mlx4: Add blue flame support for kernel consumers
  mlx4_en: Enabling new steering
  mlx4: Add support for promiscuous mode in the new steering model.
  mlx4: generalization of multicast steering.
  mlx4_en: Reporting HW revision in ethtool -i
  ...

8 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes...
Linus Torvalds [Sat, 26 Mar 2011 04:01:43 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/jbarnes/pci-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  PCI: Disable ASPM when _OSC control is not granted for PCIe services
  PCI: Changing ASPM policy, via /sys, to POWERSAVE could cause NMIs
  PCI: PCIe links may not get configured for ASPM under POWERSAVE mode
  PCI/ACPI: Report ASPM support to BIOS if not disabled from command line

8 years agoMerge git://git.infradead.org/battery-2.6
Linus Torvalds [Sat, 26 Mar 2011 04:00:29 +0000]
Merge git://git.infradead.org/battery-2.6

* git://git.infradead.org/battery-2.6: (30 commits)
  bq20z75: Fix time and temp units
  bq20z75: Fix issues with present and suspend
  z2_battery: Fix count of properties
  s3c_adc_battery: Fix method names when PM not set
  z2_battery: Add MODULE_DEVICE_TABLE
  ds2782_battery: Add MODULE_DEVICE_TABLE
  bq20z75: Add MODULE_DEVICE_TABLE
  power_supply: Update power_supply_is_watt_property
  bq20z75: Add i2c retry mechanism
  bq20z75: Add optional battery detect gpio
  twl4030_charger: Make the driver atomic notifier safe
  bq27x00: Use single i2c_transfer call for property read
  bq27x00: Cleanup bq27x00_i2c_read
  bq27x00: Minor cleanups
  bq27x00: Give more specific reports on battery status
  bq27x00: Add MODULE_DEVICE_TABLE
  bq27x00: Add new properties
  bq27x00: Poll battery state
  bq27x00: Cache battery registers
  bq27x00: Add bq27000 support
  ...

8 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm
Linus Torvalds [Sat, 26 Mar 2011 03:51:44 +0000]
Merge git://git./linux/kernel/git/agk/linux-2.6-dm

* git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm:
  dm stripe: implement merge method
  dm mpath: allow table load with no priority groups
  dm mpath: fail message ioctl if specified path is not valid
  dm ioctl: add flag to wipe buffers for secure data
  dm ioctl: prepare for crypt key wiping
  dm crypt: wipe keys string immediately after key is set
  dm: add flakey target
  dm: fix opening log and cow devices for read only tables

8 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Linus Torvalds [Sat, 26 Mar 2011 03:50:12 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: tsc2005 - fix locking issue
  Input: tsc2005 - use relative jiffies to schedule the watchdog
  Input: tsc2005 - driver should depend on GENERIC_HARDIRQS

8 years agoMerge branch 'irq-cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sat, 26 Mar 2011 03:24:05 +0000]
Merge branch 'irq-cleanup-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'irq-cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (23 commits)
  genirq: Expand generic show_interrupts()
  gpio: Fold irq_set_chip/irq_set_handler to irq_set_chip_and_handler
  gpio: Cleanup genirq namespace
  arm: ep93xx: Add basic interrupt info
  arm/gpio: Remove three copies of broken and racy debug code
  xtensa: Use generic show_interrupts()
  xtensa: Convert genirq namespace
  xtensa: Use generic IRQ Kconfig and set GENERIC_HARDIRQS_NO_DEPRECATED
  xtensa: Convert s6000 gpio irq_chip to new functions
  xtensa: Convert main irq_chip to new functions
  um: Use generic show_interrupts()
  um: Convert genirq namespace
  m32r: Use generic show_interrupts()
  m32r: Convert genirq namespace
  h8300: Use generic show_interrupts()
  h8300: Convert genirq namespace
  avr32: Cleanup eic_set_irq_type()
  avr32: Use generic show_interrupts()
  avr: Cleanup genirq namespace
  avr32: Use generic IRQ config, enable GENERIC_HARDIRQS_NO_DEPRECATED
  ...

Fix up trivial conflict in drivers/gpio/timbgpio.c

8 years agoMerge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sat, 26 Mar 2011 00:59:38 +0000]
Merge branch 'sched-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched, doc: Update sched-design-CFS.txt
  sched: Remove unused 'rq' variable and cpu_rq() call from alloc_fair_sched_group()
  sched.h: Fix a typo ("its")
  sched: Fix yield_to kernel-doc

8 years agoMerge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sat, 26 Mar 2011 00:53:09 +0000]
Merge branch 'perf-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf, x86: Complain louder about BIOSen corrupting CPU/PMU state and continue
  perf, x86: P4 PMU - Read proper MSR register to catch unflagged overflows
  perf symbols: Look at .dynsym again if .symtab not found
  perf build-id: Add quirk to deal with perf.data file format breakage
  perf session: Pass evsel in event_ops->sample()
  perf: Better fit max unprivileged mlock pages for tools needs
  perf_events: Fix stale ->cgrp pointer in update_cgrp_time_from_cpuctx()
  perf top: Fix uninitialized 'counter' variable
  tracing: Fix set_ftrace_filter probe function display
  perf, x86: Fix Intel fixed counters base initialization

8 years agoMerge branch 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Sat, 26 Mar 2011 00:52:53 +0000]
Merge branch 'irq-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  genirq: Provide locked setter for chip, handler, name
  genirq: Provide a lockdep helper
  genirq; Remove the last leftovers of the old sparse irq code

8 years agoMerge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sat, 26 Mar 2011 00:52:22 +0000]
Merge branch 'core-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  futex: Fix WARN_ON() test for UP
  WARN_ON_SMP(): Allow use in if() statements on UP
  x86, dumpstack: Use %pB format specifier for stack trace
  vsprintf: Introduce %pB format specifier
  lockdep: Remove unused 'factor' variable from lockdep_stats_show()

8 years agoMerge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Sat, 26 Mar 2011 00:51:51 +0000]
Merge branch 'x86-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: DT: Cleanup namespace and call irq_set_irq_type() unconditional
  x86: DT: Fix return condition in irq_create_of_mapping()
  x86, mpparse: Move check_slot into CONFIG_X86_IO_APIC context

8 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Linus Torvalds [Sat, 26 Mar 2011 00:47:58 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/gerg/m68knommu

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68k: merge m68k and m68knommu arch directories

8 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6
Linus Torvalds [Sat, 26 Mar 2011 00:47:38 +0000]
Merge git://git./linux/kernel/git/davem/sparc-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc32: Fix multiple RTC detections on SUN4D

8 years agoMerge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6
Linus Torvalds [Sat, 26 Mar 2011 00:47:04 +0000]
Merge branch 'for-linus' of git://git390.marist.edu/linux-2.6

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
  [S390] cmpxchg: implement cmpxchg64()
  [S390] xchg/cmpxchg: move to own header file
  [S390] ccwgroup_driver: remove duplicate members
  [S390] ccw_bus_type: make it static
  [S390] ccw_driver: remove duplicate members
  [S390] qdio: prevent handling of buffers if count is zero
  [S390] setup: register bss section as resource
  [S390] setup: simplify setup_resources()
  [S390] wire up sys_syncfs
  [S390] wire up sys_clock_adjtime
  [S390] wire up sys_open_by_handle_at
  [S390] wire up sys_name_to_handle_at
  [S390] oprofile: disable hw sampling for CONFIG_32BIT
  [S390] early: limit savesys cmd string handling
  [S390] early: Fix possible overlapping data buffer

8 years agoMerge branch 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus
Linus Torvalds [Sat, 26 Mar 2011 00:46:34 +0000]
Merge branch 'upstream' of git://git.linux-mips.org/upstream-linus

* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus: (49 commits)
  MIPS: JZ4740: Set nand ecc offsets for the qi_lb60 board
  MIPS: JZ4740: qi_lb60: Add gpio-charger device
  MIPS: Wire up syncfs(2).
  MIPS: Hook up name_to_handle_at, open_by_handle_at and clock_adjtime syscalls.
  MIPS: VR41xx: Convert to new irq_chip functions
  MIPS: TXx9: Convert to new irq_chip functions
  MIPS: SNI: Convert to new irq_chip functions
  MIPS: Sibyte: Convert to new irq_chip functions
  MIPS: IP32: Convert to new irq_chip functions
  MIPS: IP27: Convert to new irq_chip functions
  MIPS: IP22/IP28: Convert to new irq_chip functions
  MIPS: RB532: Convert to new irq_chip functions
  MIPS: PowerTV: Convert to new irq_chip functions
  MIPS: PNX8550: Convert to new irq_chip functions
  MIPS: PNX83xx: Convert to new irq_chip functions
  MIPS: msp71xx: Convert to new irq_chip functions
  MIPS: Loongson: Convert to new irq_chip functions
  MIPS: Use generic show_interrupts()
  MIPS: SMTC: Cleanup the hook mess and use irq_data
  MIPS: SMTC: Use irq_data in smtc_forward_irq()
  ...

8 years agoipcns: fix use after free in free_ipc_ns()
Xiaotian Feng [Fri, 25 Mar 2011 08:57:01 +0000]
ipcns: fix use after free in free_ipc_ns()

commit b515498 ("userns: add a user namespace owner of ipc ns") added a
user namespace owner of ipc ns, but it also introduced a use after free in
free_ipc_ns().

Signed-off-by: Xiaotian Feng <dfeng@redhat.com>
Acked-by: "Serge E. Hallyn" <serge.hallyn@canonical.com>
Acked-by: David Howells <dhowells@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Daniel Lezcano <daniel.lezcano@free.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agocodafs: fix build break when CONFIG_PROC_SYSCTL=n
Rakib Mullick [Fri, 25 Mar 2011 08:57:01 +0000]
codafs: fix build break when CONFIG_PROC_SYSCTL=n

Commit 0bc825d240ab ("codafs: fix compile warning when CONFIG_SYSCTL=n")
introduces build breakage, when CONFIG_PROC_SYSCTL=n and
CONFIG_CODA_FS=y:

  fs/built-in.o: In function `init_coda':
  psdev.c:(.init.text+0xc02): undefined reference to `coda_sysctl_init'
  psdev.c:(.init.text+0xc7c): undefined reference to `coda_sysctl_clean'
  fs/built-in.o: In function `exit_coda':
  psdev.c:(.exit.text+0xa9): undefined reference to `coda_sysctl_clean'
  make: *** [.tmp_vmlinux1] Error 1

Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com>
Reported-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agomemstick: add driver for Ricoh R5C592 card reader
Maxim Levitsky [Fri, 25 Mar 2011 08:56:59 +0000]
memstick: add driver for Ricoh R5C592 card reader

Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Acked-by: Alex Dubov <oakad@yahoo.com>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agokdb: add usage string of 'per_cpu' command
Namhyung Kim [Mon, 15 Mar 2010 12:28:00 +0000]
kdb: add usage string of 'per_cpu' command

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>

8 years agokgdb,x86_64: fix compile warning found with sparse
Jason Wessel [Mon, 15 Mar 2010 12:28:00 +0000]
kgdb,x86_64: fix compile warning found with sparse

Fix sparse warning:

arch/x86/kernel/kgdb.c:123:9: warning: switch with no cases

Reported-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>

8 years agokdb: code cleanup to use macro instead of value
Jovi Zhang [Mon, 15 Mar 2010 12:28:00 +0000]
kdb: code cleanup to use macro instead of value

It's better to use macro KDB_BASE_CMD_MAX instead of 50

Signed-off-by: Jovi Zhang <bookjovi@gmail.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>

8 years agokgdboc,kgdbts: strlen() doesn't count the terminator
Dan Carpenter [Mon, 15 Mar 2010 12:28:00 +0000]
kgdboc,kgdbts: strlen() doesn't count the terminator

This is an off by one because strlen() doesn't count the null
terminator.  We strcpy() these strings into an array of size
MAX_CONFIG_LEN.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>

8 years agodocs: update the development process document
Jonathan Corbet [Fri, 25 Mar 2011 18:17:53 +0000]
docs: update the development process document

Here's a set of changes updating Documentation/development-process.  I have
update kernel releases and relevant statistics, added information for a
couple of tools, zapped some trailing white space, and generally tried to
make it more closely match the current state of affairs.

[Typo fixes from Joe Perches and Nicolas Kaiser incorporated]

Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Acked-by: Greg KH <greg@kroah.com>
Cc: Randy Dunlap <rdunlap@xenotime.net>

8 years agoALSA: Fix yet another race in disconnection
Takashi Iwai [Thu, 24 Mar 2011 08:50:15 +0000]
ALSA: Fix yet another race in disconnection

This patch fixes a race between snd_card_file_remove() and
snd_card_disconnect().  When the card is added to shutdown_files list
in snd_card_disconnect(), but it's freed in snd_card_file_remove() at
the same time, the shutdown_files list gets corrupted.  The list member
must be freed in snd_card_file_remove() as well.

Reported-and-tested-by: Russ Dill <russ.dill@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

8 years agoMIPS: JZ4740: Set nand ecc offsets for the qi_lb60 board
Lars-Peter Clausen [Tue, 8 Feb 2011 02:43:54 +0000]
MIPS: JZ4740: Set nand ecc offsets for the qi_lb60 board

The jz4740 nand driver now requires that the ecc offsets are set.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/2058/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

8 years agoMIPS: JZ4740: qi_lb60: Add gpio-charger device
Lars-Peter Clausen [Tue, 8 Feb 2011 02:43:53 +0000]
MIPS: JZ4740: qi_lb60: Add gpio-charger device

Register the gpio-charger device which reports whether device is currently
charging or not.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/2059/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

8 years agoMIPS: Wire up syncfs(2).
Ralf Baechle [Fri, 25 Mar 2011 17:45:20 +0000]
MIPS: Wire up syncfs(2).

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

8 years agoMIPS: Hook up name_to_handle_at, open_by_handle_at and clock_adjtime syscalls.
David Daney [Fri, 18 Mar 2011 17:37:23 +0000]
MIPS: Hook up name_to_handle_at, open_by_handle_at and clock_adjtime syscalls.

These system calls we recently added.

32-bit ABIs need compat handling for sys_clock_adjtime().

o32 also needs compat handling for sys_open_by_handle_at();

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2165/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

8 years agoMIPS: VR41xx: Convert to new irq_chip functions
Thomas Gleixner [Wed, 23 Mar 2011 21:09:17 +0000]
MIPS: VR41xx: Convert to new irq_chip functions

And cleanup direct access to irq_desc[].

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2208/
Patchwork: https://patchwork.linux-mips.org/patch/2209/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

8 years agoMIPS: TXx9: Convert to new irq_chip functions
Thomas Gleixner [Wed, 23 Mar 2011 21:09:16 +0000]
MIPS: TXx9: Convert to new irq_chip functions

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2207/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

8 years agoMIPS: SNI: Convert to new irq_chip functions
Thomas Gleixner [Wed, 23 Mar 2011 21:09:15 +0000]
MIPS: SNI: Convert to new irq_chip functions

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2206/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

8 years agoMIPS: Sibyte: Convert to new irq_chip functions
Thomas Gleixner [Wed, 23 Mar 2011 21:09:14 +0000]
MIPS: Sibyte: Convert to new irq_chip functions

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2205/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

8 years agoMIPS: IP32: Convert to new irq_chip functions
Thomas Gleixner [Wed, 23 Mar 2011 21:09:13 +0000]
MIPS: IP32: Convert to new irq_chip functions

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2204/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

8 years agoMIPS: IP27: Convert to new irq_chip functions
Thomas Gleixner [Wed, 23 Mar 2011 21:09:12 +0000]
MIPS: IP27: Convert to new irq_chip functions

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2203/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

8 years agoMIPS: IP22/IP28: Convert to new irq_chip functions
Thomas Gleixner [Wed, 23 Mar 2011 21:09:11 +0000]
MIPS: IP22/IP28: Convert to new irq_chip functions

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2202/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

8 years agoMIPS: RB532: Convert to new irq_chip functions
Thomas Gleixner [Wed, 23 Mar 2011 21:09:10 +0000]
MIPS: RB532: Convert to new irq_chip functions

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2201/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

8 years agoMIPS: PowerTV: Convert to new irq_chip functions
Thomas Gleixner [Wed, 23 Mar 2011 21:09:09 +0000]
MIPS: PowerTV: Convert to new irq_chip functions

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2200/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

8 years agoMIPS: PNX8550: Convert to new irq_chip functions
Thomas Gleixner [Wed, 23 Mar 2011 21:09:09 +0000]
MIPS: PNX8550: Convert to new irq_chip functions

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2199/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>