11 years agoALSA: revo51: add headphone output
Alexander Beregalov [Thu, 21 Aug 2008 04:28:42 +0000]
ALSA: revo51: add headphone output

It is ALSA bug #1754.
 D6 bit in 02 register is PW4.

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: hda - Create beep control on ALC269 codec
Takashi Iwai [Wed, 20 Aug 2008 16:38:26 +0000]
ALSA: hda - Create beep control on ALC269 codec

ALC269 codec has a beep, but it was not used, so far.
Create a beep control appropriately.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: aoa - Remove duplicate assignment of SNDRV_PCM_FMTBIT_S{16,24}_BE bits
Roel Kluin [Wed, 20 Aug 2008 08:31:38 +0000]
ALSA: aoa - Remove duplicate assignment of SNDRV_PCM_FMTBIT_S{16,24}_BE bits

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: opl3sa2: replace nd_opl3sa2_info_xxx() with snd_wss_info_xxx()
Krzysztof Helt [Tue, 19 Aug 2008 19:51:49 +0000]
ALSA: opl3sa2: replace nd_opl3sa2_info_xxx() with snd_wss_info_xxx()

Replace snd_opl3sa2_info_xxx() with snd_wss_info_xxx().
Drop check of card->private_data which cannot be NULL
if card is not NULL (spotted by Rene Herman).

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Reviewed-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: als4000 - Code clean up
Andreas Mohr [Wed, 20 Aug 2008 08:04:56 +0000]
ALSA: als4000 - Code clean up

- use specs-derived register name enums instead of open-coded numeric
values, for better understanding of things
- fix naming confusion ("gcr" was _NOT_ the GCR register stuff, but
  instead the io _base_ which has multiplexed _access_ to GCR config
  space, at _sub_ registers 0x08 and 0x0c)
- add FIXME comments about a race condition and MPU401 features

Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: Update MAINTAINERS
Takashi Iwai [Tue, 19 Aug 2008 11:10:04 +0000]
ALSA: Update MAINTAINERS

Added tiwai to MAINTAINERS (per request of akpm)

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agosound: oss: remove driver for SGI HAL2 audio device
Thomas Bogendoerfer [Tue, 19 Aug 2008 09:54:14 +0000]
sound: oss: remove driver for SGI HAL2 audio device

With the restructering of the indy button handling the old OSS HAL2 driver
got broken.  Since there is a new ALSA driver for HAL2, the experimental
OSS driver is obsolete and will be removed by this patch.

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: hda - disable delayed period-ack with bdl_pos_adj=0
Takashi Iwai [Mon, 18 Aug 2008 15:11:09 +0000]
ALSA: hda - disable delayed period-ack with bdl_pos_adj=0

When bdl_pos_adj=0 is given, disable the position-check and the delayed
period update mechanism.  Usually bdl_pos_adj=0 is set only for the
debugging purpose on really broken hardwares.  It's better to disable
the extra complexity in such a case.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: wss_lib: snd_wss_calibrate_mute improvement
Krzysztof Helt [Sun, 17 Aug 2008 20:38:27 +0000]
ALSA: wss_lib: snd_wss_calibrate_mute improvement

Mute sound by setting mute bit without
setting volume to 0. It makes both source code
and binary shorter.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: hda - Add AD1882A codec support
Takashi Iwai [Mon, 18 Aug 2008 11:53:07 +0000]
ALSA: hda - Add AD1882A codec support

Added the basic support of AD1882A codec chip.
It's almost compatible with AD1882, but with a digital mic and some
differences in connections.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: opl3sa2: drop snd_card pointer from the snd_opl3sa2 structure
Krzysztof Helt [Sun, 17 Aug 2008 18:01:14 +0000]
ALSA: opl3sa2: drop snd_card pointer from the snd_opl3sa2 structure

Remove card pointer from the snd_opl3sa2
structure and break circular reference
snd_card->snd_opl3sa2->snd_card.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Acked-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: hda - set up HDMI channels
Takashi Iwai [Wed, 30 Jul 2008 13:13:29 +0000]
ALSA: hda - set up HDMI channels

Set up channel information for HDMI widgets.  This will allow LPCM
with multiple channels supported on some HDMI devices.

TODO: It still doesn't check ELD and doesn't change PCM parameters
dynamically.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: hda - print a few HDMI information in proc
Takashi Iwai [Wed, 30 Jul 2008 13:13:29 +0000]
ALSA: hda - print a few HDMI information in proc

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: hda - Add definitions of HDMI-related verbs
Takashi Iwai [Wed, 30 Jul 2008 13:13:28 +0000]
ALSA: hda - Add definitions of HDMI-related verbs

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agompu401: reindent misindented spinlock
Ilpo Järvinen [Tue, 19 Aug 2008 07:56:33 +0000]
mpu401: reindent misindented spinlock

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: release v1.0.18rc1
Jaroslav Kysela [Fri, 15 Aug 2008 11:33:10 +0000]
ALSA: release v1.0.18rc1

Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: dummy driver - do not use assignment in if condition
Jaroslav Kysela [Fri, 15 Aug 2008 10:59:02 +0000]
ALSA: dummy driver - do not use assignment in if condition

checkpatch.pl does not like assignment in if condition

Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agosound: Fix esoteric double free in the dummy sound driver.
Daniel THOMPSON [Fri, 15 Aug 2008 09:53:38 +0000]
sound: Fix esoteric double free in the dummy sound driver.

The dummy driver uses runtime->private_free but still frees
its pcm structures on error paths.

This is esoteric because the error paths in question are
unreachable. Thus the bug is only a problem when someone
copies this code into other drivers.

Signed-off-by: Daniel R Thompson <daniel.thompson@st.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: hda: 92HD75xx fixes
Matthew Ranostay [Fri, 15 Aug 2008 05:45:52 +0000]
ALSA: hda: 92HD75xx fixes

Fixed several noise issues with DACs and ADCs on some 92HD75xxx based codecs
with certain revision id's.

Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: hda: dynamically create capture mux controls
Matthew Ranostay [Fri, 15 Aug 2008 05:43:24 +0000]
ALSA: hda: dynamically create capture mux controls

Dynamically create capture mux volume controls when a output amp is detected.

Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: fix a typo during snd_assert() removal
Takashi Iwai [Thu, 14 Aug 2008 05:51:57 +0000]
ALSA: fix a typo during snd_assert() removal

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: usb-audio - Add ignore_ctl_error parameter
Takashi Iwai [Wed, 13 Aug 2008 13:40:53 +0000]
ALSA: usb-audio - Add ignore_ctl_error parameter

Added the ignore_ctl_error parameter to enable/disable the control-error
handling for mixer interfaces.  It was a hard-coded ifdef, and now you
can change it more easily.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: Add missing description of usb-audio parameters
Takashi Iwai [Wed, 13 Aug 2008 13:27:43 +0000]
ALSA: Add missing description of usb-audio parameters

Added the missing description of module parameters of usb-audio driver
to ALSA-Configuration.txt.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: hda - put all HDA codec IDs to components for precise hw detection
Jaroslav Kysela [Wed, 13 Aug 2008 18:55:32 +0000]
ALSA: hda - put all HDA codec IDs to components for precise hw detection

Export HDA codec subvendor ID and revision ID to user space via the
components variable. Our alsactl utility requires these values for
the perfect hardware identification.

Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: ALSA-Configuration.txt: supported cards update
Alexander Beregalov [Tue, 12 Aug 2008 20:10:55 +0000]
ALSA: ALSA-Configuration.txt: supported cards update

ALSA-Configuration.txt: supported cards update

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: sound/pci: supported cards update
Alexander Beregalov [Wed, 13 Aug 2008 08:36:21 +0000]
ALSA: sound/pci: supported cards update

sound/pci: supported cards update

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: hda - initialize node 0x21 properly on AD1988 codecs
Takashi Iwai [Mon, 11 Aug 2008 16:08:54 +0000]
ALSA: hda - initialize node 0x21 properly on AD1988 codecs

The widget node 0x21 should be initialized as unmuted/full (0dB)
as default.  This will reduce additional manual work by user at the
first time use.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: hda - Don't reset SPDIF in each status change
Takashi Iwai [Mon, 11 Aug 2008 08:04:40 +0000]
ALSA: hda - Don't reset SPDIF in each status change

The SPDIF output is toggled at each time any SPDIF status bits are changed
because of the known problems on some codecs.  But, this also results in
loosing the sync, and the problem is more obvious on HDMI output over
SPDIF.  Since the toggle is necessary only for some codecs, we should
check whether this workaround is needed and skip if unnecessary.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: sound/pci/Kconfig: update for ice1712/24
Alexander Beregalov [Sun, 10 Aug 2008 22:52:42 +0000]
ALSA: sound/pci/Kconfig: update for ice1712/24

sound/pci/Kconfig: update for ice1712/24

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: ice1724/revo: simple clean up
Alexander Beregalov [Sun, 10 Aug 2008 22:09:04 +0000]
ALSA: ice1724/revo: simple clean up

ice1724/revo: simple clean up

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: Clean up snd_BUG()
Takashi Iwai [Fri, 8 Aug 2008 15:18:08 +0000]
ALSA: Clean up snd_BUG()

Use the standard WARN() macro for snd_BUG().

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: Kill snd_assert() definition
Takashi Iwai [Fri, 8 Aug 2008 15:14:55 +0000]
ALSA: Kill snd_assert() definition

Remove snd_assert() completely now.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: Kill snd_assert() in other places
Takashi Iwai [Fri, 8 Aug 2008 15:12:47 +0000]
ALSA: Kill snd_assert() in other places

Kill snd_assert() in other places, either removed or replaced with
if () with snd_BUG_ON().

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: Kill snd_assert() in sound/pci/*
Takashi Iwai [Fri, 8 Aug 2008 15:12:14 +0000]
ALSA: Kill snd_assert() in sound/pci/*

Kill snd_assert() in sound/pci/*, either removed or replaced with
if () with snd_BUG_ON().

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: Kill snd_assert() in sound/isa/*
Takashi Iwai [Fri, 8 Aug 2008 15:11:45 +0000]
ALSA: Kill snd_assert() in sound/isa/*

Kill snd_assert() in sound/isa/*, either removed or replaced with
if () with snd_BUG_ON().

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: Kill snd_assert() in sound/core/*
Takashi Iwai [Fri, 8 Aug 2008 15:09:09 +0000]
ALSA: Kill snd_assert() in sound/core/*

Kill snd_assert() in sound/core/*, either removed or replaced with
if () with snd_BUG_ON().

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: Introduce snd_BUG_ON() macro
Takashi Iwai [Fri, 8 Aug 2008 15:06:01 +0000]
ALSA: Introduce snd_BUG_ON() macro

Introduced snd_BUG_ON() macro as a replacement of snd_assert() macro.
snd_assert() is pretty ugly as it has the control flow in its argument.
OTOH, snd_BUG_ON() behaves like a normal conditional, thus it's much
easier to read the flow.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: wss_lib: missing closing brace in (ifdeffed out) debug function.
Rene Herman [Fri, 8 Aug 2008 14:39:21 +0000]
ALSA: wss_lib: missing closing brace in (ifdeffed out) debug function.

Signed-off-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: au88x0: clipping ceiling loop wrong in comment
roel kluin [Thu, 7 Aug 2008 19:56:22 +0000]
ALSA: au88x0: clipping ceiling loop wrong in comment

As is the clipping ceiling loop appears wrong anyways

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: ASoC - fix DMA channel selection in Freescale MPC8610 sound drivers
Timur Tabi [Wed, 6 Aug 2008 20:01:01 +0000]
ALSA: ASoC - fix DMA channel selection in Freescale MPC8610 sound drivers

On the Freescale MPC8610, SSI1 is hard-coded to use DMA channels 0 and 1
for playback and capture, and SSI2 is hard-coded to use DMA channels 2 and 3.
This patch fixes the fabric driver so that it uses the right channels.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: ASoC: Add WM8580 CODEC driver
Mark Brown [Wed, 6 Aug 2008 12:18:26 +0000]
ALSA: ASoC: Add WM8580 CODEC driver

The WM8580 is an audio CODEC designed for DVD and surround sound
applications, offering three stereo DACs and a stereo ADC.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: wss_lib: rework snd_ad1848_probe()
Rene Herman [Wed, 6 Aug 2008 06:09:34 +0000]
ALSA: wss_lib: rework snd_ad1848_probe()

Make snd_ad1848_probe() easier to follow. With an exception for only
trying once as soon as the codec is out of init (which should be all
that's needed) the detection logic should be unchanged.

Signed-off-by: Rene Herman <rene.herman@gmail.com>
Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: ac97 - Enable mono-out on ALC203 codec as default
Takashi Iwai [Tue, 5 Aug 2008 13:45:45 +0000]
ALSA: ac97 - Enable mono-out on ALC203 codec as default

Use pin 37 for mono-out as default on ALC203.

Reported-by: george pee <georgepee@gmail.com>
Tested-by: george pee <georgepee@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: snd_usb_audio: fix SB Extigy IR Remote regression
Phillip Michael Jordan [Tue, 5 Aug 2008 09:01:00 +0000]
ALSA: snd_usb_audio: fix SB Extigy IR Remote regression

The support for the SB Extigy's remote seems to be broken in all
recent ALSA versions, including 1.0.17. The driver detects the event
correctly, then submits a URB to query the RC code. On the Extigy, the
URB is submitted with a length of 2 bytes. My hardware, however, only
replies with 1 byte, containing the correct RC button code. The
current implementation discards this as being too short. (line 1784 of
usbmixer.c)

This patch specifies a "minimum packet length" in the remote control
configuration. I've left the values for the Audigy 2/Live! the same as
the packet length, as I'm assuming the existing code works with them.
(I don't have the hardware to confirm) This fixes the Extigy RC
support, e.g. for use with Lirc.

Signed-off-by: Phillip Michael Jordan <phil@philjordan.eu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: ASoC: Add WM8900 CODEC driver
Mark Brown [Mon, 4 Aug 2008 11:06:45 +0000]
ALSA: ASoC: Add WM8900 CODEC driver

The WM8900 is designed for portable multimedia applications requiring
low power consumption, high performance audio and a compact form factor
providing:

 - 24 bit stereo ADC and DAC
 - Microphone and line inputs
 - Line outputs
 - Class G headphone amplifier

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: hda: Add support for ECS/PC Chips boards with Sigmatel codecs
Mauro Carvalho Chehab [Mon, 4 Aug 2008 13:39:59 +0000]
ALSA: hda: Add support for ECS/PC Chips boards with Sigmatel codecs

Thanks to Sistema Fenix (http://www.sistemafenix.com.br/) and CDI Brasil
(www.cdibrasil.com.br/) for sponsoring this development.

Signed-off-by: Gilberto <gilberto@sistemafenix.com.br>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: hda - Fix sound on NEC Versa S9100
Pascal Terjan [Mon, 4 Aug 2008 12:36:05 +0000]
ALSA: hda - Fix sound on NEC Versa S9100

This patch adds sound support for NEC Versa S9100
With it, we get sound on the internal speaker and headphone (with
automute working) while there is no sound by default.
External mic also works fine but I don't know if there is an internal
one (if there is an internal mic it does not work currently), and I
had to send back the hardware.

Signed-off-by: Pascal Terjan <pterjan@mandriva.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: wss_lib: fix AZT2320 probe.
Rene Herman [Tue, 5 Aug 2008 07:33:33 +0000]
ALSA: wss_lib: fix AZT2320 probe.

After the transition from cs4321_lib to wss_lib, azt2320 probe visits
snd_ad1848_probe during detection. It expects register 0 (LEFT_INPUT)
to be able to retain the value 0xaa during detection but AZT2320 does
not support MIC gain meaning it reads back as 0x8a instead.

Signed-off-by: Rene Herman <rene.herman@gmail.com>
Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: snd-cs4236: add Techmakers MF-4236PW PnP card ID
Rene Herman [Sun, 3 Aug 2008 23:23:43 +0000]
ALSA: snd-cs4236: add Techmakers MF-4236PW PnP card ID

Add the Techmakers MF-4236PW (Crystal CX4236B-XQ3) PnP card ID.

Signed-off-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: wss_lib: remove second mutexes initialization
Krzysztof Helt [Sun, 3 Aug 2008 15:57:21 +0000]
ALSA: wss_lib: remove second mutexes initialization

Remove initializations of spinlock and mutexes which
are done earlier in snd_wss_new(). The snd_wss_new()
is called from snd_wss_create().

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: wss_lib: opti92x-ad1848 WSS_HW_DETECT fix
Rene Herman [Mon, 4 Aug 2008 03:26:26 +0000]
ALSA: wss_lib: opti92x-ad1848 WSS_HW_DETECT fix

snd-opti92x-ad1848 mistakingly passes WSS_HW_OPTI93X currently. This
fixes it as tested with a OPTi 82C929A/AD1848 card.

Signed-off-by: Rene Herman <rene.herman@gmail.com>
Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: wss_lib: fix opti93x capture formats limitations
Krzysztof Helt [Thu, 31 Jul 2008 19:11:46 +0000]
ALSA: wss_lib: fix opti93x capture formats limitations

Limit opti93x cards capture formats to only linear ones.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Reviewed-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: wss_lib: use wss detection code instead of ad1848 one
Krzysztof Helt [Thu, 31 Jul 2008 19:10:47 +0000]
ALSA: wss_lib: use wss detection code instead of ad1848 one

Use the wss detection code and kill the ad1848 library.
The library is fully assimilated into the new wss library.

This required reworking of the AD1848 family code
so the code is changed to correctly detect chips from
the AD1848 and CS4231 families.

I have tested it on following cards:
Gallant SC-6600 (codec: AD1848, driver: snd-sc6600)
SoundScape VIVO/90 (codec: AD1845, driver: snd-sscape)
SG Waverider (codec: CS4231A, driver: Rene Herman's snd-galaxy)
Opti930 (codec: built-in - CS4231 compatible, driver: snd-opti93x)
Opti931 (codec: built-in - CS4231 compatible, driver: snd-opti93x)
Gallant SC-70P (chip/codec: CS4237B, driver: snd-cs4236)
Audio Plus 3D (chip/codec: CMI8330A, driver: snd-cmi8330)
Dell Latitude CP (chip/codec: cs4236, driver snd-cs4232)

Sound playback and recording works on all these cards.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Reviewed-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: wss_lib: use wss pcm code instead of ad1848 one
Krzysztof Helt [Thu, 31 Jul 2008 19:09:32 +0000]
ALSA: wss_lib: use wss pcm code instead of ad1848 one

Use the wss pcm code and kill the ad1848 pcm code.

The AD1848 chip is much slower than CS4231 chips
so the waiting loop was increased 100x (10x is not
enough).

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Reviewed-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: wss_lib: use wss mixer code instead of ad1848 one
Krzysztof Helt [Thu, 31 Jul 2008 19:08:32 +0000]
ALSA: wss_lib: use wss mixer code instead of ad1848 one

Use the wss mixer code and kill the ad1848 mixer code.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Reviewed-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: wss_lib: use CS4231P instead of AD1848P (kill the AD1848P)
Krzysztof Helt [Thu, 31 Jul 2008 19:07:30 +0000]
ALSA: wss_lib: use CS4231P instead of AD1848P (kill the AD1848P)

Use CS4231P instead of AD1848P (kill the AD1848P).

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Reviewed-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: wss_lib: replace ad1848 mixer element macros with wss ones
Krzysztof Helt [Thu, 31 Jul 2008 19:06:46 +0000]
ALSA: wss_lib: replace ad1848 mixer element macros with wss ones

Use the wss macros instead of ad1848 ones.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Reviewed-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: wss_lib: use wss constants instead of ad1848 ones
Krzysztof Helt [Thu, 31 Jul 2008 19:05:44 +0000]
ALSA: wss_lib: use wss constants instead of ad1848 ones

Use wss constants for mode.
Move ad1848 hardware constants to the wss.h.
Move mixer tlv macros into the ad1848_lib.c from the ad1848.h.

Drop the MODE_RUNNING spurious IRQ guard on AD1848 as it doesn not seem
to be needed.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Reviewed-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: wss_lib: use struct snd_wss instead of snd_ad1848
Krzysztof Helt [Thu, 31 Jul 2008 19:04:37 +0000]
ALSA: wss_lib: use struct snd_wss instead of snd_ad1848

The snd_wss is superset of the snd_ad1848 so kill
the latter and replace it with the snd_wss.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Reviewed-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: wss_lib: rename cs4321_foo to wss_foo
Krzysztof Helt [Thu, 31 Jul 2008 19:03:41 +0000]
ALSA: wss_lib: rename cs4321_foo to wss_foo

Rename functions and structures from the former
cs4321_lib to names more corresponding with the
new name: wss_lib.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Reviewed-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: wss_lib: rename cs4231.h into wss.h
Krzysztof Helt [Thu, 31 Jul 2008 19:02:42 +0000]
ALSA: wss_lib: rename cs4231.h into wss.h

Rename file include/sound/cs4231.h
into include/sound/wss.h

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Reviewed-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: wss_lib: move cs4231_lib into wss_lib
Krzysztof Helt [Thu, 31 Jul 2008 19:00:17 +0000]
ALSA: wss_lib: move cs4231_lib into wss_lib

Move the file sound/isa/cs423x/cs4231_lib.c
into sound/isa/cs423x/wss_lib.c
This is the first step toward merging all libraries
for Windows Sound System compatible chips
into a single library.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Reviewed-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: ice1724 - Support for Terrasoniq/MUSONIK TS22 PCI card
Misha Zhilin [Fri, 1 Aug 2008 10:45:14 +0000]
ALSA: ice1724 - Support for Terrasoniq/MUSONIK TS22 PCI card

Added support for Terrasoniq/MUSONIK TS22 PCI card.

Signed-off-by: Misha Zhilin <misha@epiphan.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: Fix limit of 8 PCM devices in SNDRV_CTL_IOCTL_PCM_NEXT_DEVICE
Pawel MOLL [Wed, 30 Jul 2008 11:46:40 +0000]
ALSA: Fix limit of 8 PCM devices in SNDRV_CTL_IOCTL_PCM_NEXT_DEVICE

When compiled with CONFIG_SND_DYNAMIC_MINORS the ALSA core is fine
to have more than 8 PCM devices per card, except one place - the
SNDRV_CTL_IOCTL_PCM_NEXT_DEVICE ioctl, which will not enumerate
devices > 7. This patch fixes the issue, changing the devices list
organisation.

Instead of adding new device to the tail, the list is now kept always
ordered (by card number, then device number). Thus, during enumeration,
it is easy to discover the fact that there is no more given card's
devices.

Additionally the device field of struct snd_pcm had to be changed to int,
as its "unsignednity" caused a lot of problems when comparing it to
potentially negative signed values. (-1 is 0xffffffff or even more then ;-)

Signed-off-by: Pawel Moll <pawel.moll@st.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: Add USB US122L driver
Karsten Wiese [Wed, 30 Jul 2008 13:13:29 +0000]
ALSA: Add USB US122L driver

Added a new US122L usb-audio driver.  This driver works together with a
dedicated alsa-lib plugin.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agosound: Revert "ALSA: Fix limit of 8 PCM devices in SNDRV_CTL_IOCTL_PCM_NEXT_DEVICE"
Jaroslav Kysela [Fri, 1 Aug 2008 11:36:04 +0000]
sound: Revert "ALSA: Fix limit of 8 PCM devices in SNDRV_CTL_IOCTL_PCM_NEXT_DEVICE"

This reverts commit fb3d6f2b77bdec75d45aa9d4464287ed87927866.

New, updated patch with same subject replaces this commit.

Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: IEC958 definition for consumer status channel update
Pawel MOLL [Fri, 1 Aug 2008 10:23:44 +0000]
ALSA: IEC958 definition for consumer status channel update

Updated IEC958 consumer status channel definitions according
to the third edition of IEC60958-3 spec.

Signed-off-by: Pawel Moll <pawel.moll@st.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: Fix limit of 8 PCM devices in SNDRV_CTL_IOCTL_PCM_NEXT_DEVICE
Pawel MOLL [Tue, 29 Jul 2008 16:34:26 +0000]
ALSA: Fix limit of 8 PCM devices in SNDRV_CTL_IOCTL_PCM_NEXT_DEVICE

When compiled with CONFIG_SND_DYNAMIC_MINORS the ALSA core is fine
to have more than 8 PCM devices per card, except one place - the
SNDRV_CTL_IOCTL_PCM_NEXT_DEVICE ioctl, which will not enumerate
devices > 7. This patch fixes the issue, changing the devices list
organisation.

Instead of adding new device to the tail, the list is now kept always
ordered (by card number, then device number). Thus, during enumeration,
it is easy to discover the fact that there is no more given card's
devices. The same limit was present in OSS emulation code. It has
been fixed as well.

Additionally the device field of struct snd_pcm is now int, instead of
unsigned int, as there is no obvious reason for keeping it unsigned.
This caused a lot of problems with comparing this value with other
(almost always signed) variables. There is just one more place where
device number is unsigned - in struct snd_pcm_info, which should be
also sorted out in future.

Signed-off-by: Pawel MOLL <pawel.moll@st.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: ASoC: convert use of uint to unsigned int
Jon Smirl [Tue, 29 Jul 2008 14:22:24 +0000]
ALSA: ASoC: convert use of uint to unsigned int

ASOC: convert use of uint to unsigned int

Signed-off-by: Jon Smirl <jonsmirl@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: ASoC: Add all CODECs Kconfig option
Mark Brown [Tue, 29 Jul 2008 10:42:35 +0000]
ALSA: ASoC: Add all CODECs Kconfig option

Allow all the CODEC drivers to be built without a machine driver in order
to facilitate testing of subsystem-wide changes and gain better coverage
from automated testing efforts. This also helps things like the generic
OpenFirmware machine driver for PowerPC.

Currently AC97 CODECs are not included since the current setup relies
on having a controller driver available.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: ASoC: AD1980 audio codec driver
Cliff Cai [Tue, 29 Jul 2008 10:42:34 +0000]
ALSA: ASoC: AD1980 audio codec driver

[Mechanical updates from code review applied -- broonie]

Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: ASoC: Staticise keyclick dev_attr in tlv320aic26
Mark Brown [Tue, 29 Jul 2008 10:42:33 +0000]
ALSA: ASoC: Staticise keyclick dev_attr in tlv320aic26

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: ASoC: Export DAI and codec for TLV320AIC26
Mark Brown [Tue, 29 Jul 2008 10:42:32 +0000]
ALSA: ASoC: Export DAI and codec for TLV320AIC26

This fixes sparse warnings and allows non-OpenFirmware systems to attempt
to bind to the device.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: ASoC: Add Texas Instruments TLV320AIC26 codec driver
Grant Likely [Tue, 29 Jul 2008 10:42:31 +0000]
ALSA: ASoC: Add Texas Instruments TLV320AIC26 codec driver

ASoC Codec driver for the TLV320AIC26 device.  As it stands, this driver
doesn't support all the modes and clocking options of the AIC16, but it
is a start.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: ASoC: Add mpc5200-psc I2S driver
Grant Likely [Tue, 29 Jul 2008 10:42:30 +0000]
ALSA: ASoC: Add mpc5200-psc I2S driver

This is an I2S bus driver for the MPC5200 PSC device.  It depends on the
soc-of helper functions to match a PSC device with a codec based on data
in the device tree.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: ASoC: Make OpenFirmware helper include file conditional
Mark Brown [Tue, 29 Jul 2008 10:42:29 +0000]
ALSA: ASoC: Make OpenFirmware helper include file conditional

The OpenFirmware API headers don't build on all platforms so ensure
that they are not included unless they are being used.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: ASoC: Add OpenFirmware helper for matching bus and codec drivers
Grant Likely [Tue, 29 Jul 2008 10:42:28 +0000]
ALSA: ASoC: Add OpenFirmware helper for matching bus and codec drivers

Simple utility layer for creating ASoC machine instances based on data
in the OpenFirmware device tree.  OF aware platform drivers and codec
drivers register themselves with this framework and the framework
automatically instantiates a machine driver.  At the moment, the driver
is not very capable and it is expected to be extended as more features
are needed for specifying the configuration in the device tree.

This is most likely temporary glue code to work around limitations in
the ASoC v1 framework.  When v2 is merged, most of this driver will
need to be reworked.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: ASoC: Rename mask to max to reflect usage
Jon Smirl [Tue, 29 Jul 2008 10:42:27 +0000]
ALSA: ASoC: Rename mask to max to reflect usage

Most of the ASoC controls refer to the maximum value that can be set for
a control as mask but there is no actual requirement for all bits to be
set at the highest possible value making the name mask misleading.
Change the code to use max instead.

Signed-off-by: Jon Smirl <jonsmirl@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: ASoC: Convert bitfields in ASoC into full int width
Jon Smirl [Tue, 29 Jul 2008 10:42:26 +0000]
ALSA: ASoC: Convert bitfields in ASoC into full int width

Convert bitfields in ASoC into full int width. This is a
simple mechanical conversion. Two places in the DAPM code
were fixed to properly use mask.

Signed-off-by: Jon Smirl <jonsmirl@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: ASoC: Allow codecs to override register display
Mark Brown [Tue, 29 Jul 2008 10:42:25 +0000]
ALSA: ASoC: Allow codecs to override register display

Some codecs have unusual features in their register maps such as very
large registers representing arrays of coefficients. Support these
codecs in the register cache sysfs file by allowing them to provide a
function register_display() overriding the default output for register
contents.

Also ensure that we don't overflow PAGE_SIZE while writing out the
register dump.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: ASoC: Permit simultaneous compilation of both PXA AC97 drivers
Dmitry Baryshkov [Tue, 29 Jul 2008 10:42:24 +0000]
ALSA: ASoC: Permit simultaneous compilation of both PXA AC97 drivers

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: hda - use input_free_device()
Takashi Iwai [Tue, 29 Jul 2008 10:08:16 +0000]
ALSA: hda - use input_free_device()

Use input_free_devce() correctly instead of kfree() at error path.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: Build jack detection
Mark Brown [Mon, 28 Jul 2008 18:05:36 +0000]
ALSA: Build jack detection

Since jack detection requires the input subsystem which may not be
desired on small systems it is not built unless required by a driver
that is being built. Drivers using jack detection should use a pattern
like this:

config SND_FOO
        tristate "..."
        ...
        select SND_JACK if INPUT=y || INPUT=SND

to ensure that the jack detection API is enabled if the input subsystem
is.  If the input subsystem is not enabled then a stub version of the
API is provided.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: Add jack reporting API
Mark Brown [Mon, 28 Jul 2008 18:05:35 +0000]
ALSA: Add jack reporting API

Currently very few systems provide information about jack status to user
space, even though many have hardware facilities to do detection. Those
systems that do use an input device with the existing SW_HEADPHONE_INSERT
switch type to do so, often independently of ALSA.

This patch introduces a standard method for representing jacks to user
space into ALSA. It allows drivers to register jacks for a sound card with
the input subsystem, binding the input device to the card to help user
space associate the input devices with their sound cards. The created
input devices are named in the form "card longname jack" where jack is
provided by the driver when allocating a jack. By default the parent for
the input device is the sound card but this can be overridden by the
card driver.

The existing user space API with SW_HEADPHONE_INSERT is preserved.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: Fix commit: Add automatic model setting for the Acer Aspire 5920G laptop
Jaroslav Kysela [Mon, 28 Jul 2008 15:07:07 +0000]
ALSA: Fix commit: Add automatic model setting for the Acer Aspire 5920G laptop

There is a whitespace at the end of added line. Remove it.

Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: hda: added 92HD81/83 support
Matthew Ranostay [Sun, 27 Jul 2008 08:30:30 +0000]
ALSA: hda: added 92HD81/83 support

Added support for 92HD81/83 family of codecs.
This also includes a pwr_mapping array for pins that have more than
one amp to power down.

Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: usb-audio: add BOSS GT-10 support
Clemens Ladisch [Mon, 28 Jul 2008 08:19:39 +0000]
ALSA: usb-audio: add BOSS GT-10 support

Add a quirk entry for the BOSS GT-10.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>

11 years agoALSA: hda: digital pc-beep support hd-audio codecs
Matthew Ranostay [Fri, 18 Jul 2008 16:20:52 +0000]
ALSA: hda: digital pc-beep support hd-audio codecs

Added digital pc-beep support using linear tone generation for hd-codecs along
with initial support for several IDT codecs.

Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: re-order AC97 codec ID table.
Rene Herman [Tue, 15 Jul 2008 14:24:50 +0000]
ALSA: re-order AC97 codec ID table.

Signed-off-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoLinux 2.6.27
Linus Torvalds [Thu, 9 Oct 2008 22:13:53 +0000]
Linux 2.6.27

11 years agoDon't allow splice() to files opened with O_APPEND
Linus Torvalds [Thu, 9 Oct 2008 21:04:54 +0000]
Don't allow splice() to files opened with O_APPEND

This is debatable, but while we're debating it, let's disallow the
combination of splice and an O_APPEND destination.

It's not entirely clear what the semantics of O_APPEND should be, and
POSIX apparently expects pwrite() to ignore O_APPEND, for example.  So
we could make up any semantics we want, including the old ones.

But Miklos convinced me that we should at least give it some thought,
and that accepting writes at arbitrary offsets is wrong at least for
IS_APPEND() files (which always have O_APPEND set, even if the reverse
isn't true: you can obviously have O_APPEND set on a regular file).

So disallow O_APPEND entirely for now.  I doubt anybody cares, and this
way we have one less gray area to worry about.

Reported-and-argued-for-by: Miklos Szeredi <miklos@szeredi.hu>
Acked-by: Jens Axboe <ens.axboe@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoMerge branch 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6
Linus Torvalds [Thu, 9 Oct 2008 19:23:54 +0000]
Merge branch 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6

* 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6:
  hwmon: (abituguru3) Enable DMI probing feature on Abit AT8 32X
  hwmon: (abituguru3) Enable reading from AUX3 fan on Abit AT8 32X
  hwmon: (adt7473) Fix some bogosity in documentation file
  hwmon: Define sysfs interface for energy consumption register
  hwmon: (it87) Prevent power-off on Shuttle SN68PT
  eeepc-laptop: Fix hwmon interface

11 years agoMerge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq
Linus Torvalds [Thu, 9 Oct 2008 19:23:35 +0000]
Merge branch 'fixes' of git://git./linux/kernel/git/davej/cpufreq

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq:
  [CPUFREQ] correct broken links and email addresses

11 years agoSLOB: fix bogus ksize calculation fix
Matt Mackall [Wed, 8 Oct 2008 19:51:57 +0000]
SLOB: fix bogus ksize calculation fix

This fixes the previous fix, which was completely wrong on closer
inspection. This version has been manually tested with a user-space
test harness and generates sane values. A nearly identical patch has
been boot-tested.

The problem arose from changing how kmalloc/kfree handled alignment
padding without updating ksize to match. This brings it in sync.

Signed-off-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years ago[CPUFREQ] correct broken links and email addresses
Németh Márton [Thu, 9 Oct 2008 12:59:17 +0000]
[CPUFREQ] correct broken links and email addresses

Replace the no longer working links and email address in the
documentation and in source code.

Signed-off-by: Márton Németh <nm127@freemail.hu>
Signed-off-by: Dave Jones <davej@redhat.com>

11 years agohwmon: (abituguru3) Enable DMI probing feature on Abit AT8 32X
Alistair John Strachan [Thu, 9 Oct 2008 13:33:59 +0000]
hwmon: (abituguru3) Enable DMI probing feature on Abit AT8 32X

Enable driver checking of the DMI product name (when enabled) on
an Abit AT8 32X, instead of falling back to a manual probe. This
eliminates false negatives and eventually will help avoid
unnecessary bus probes on unsupported mainboards.

Signed-off-by: Alistair John Strachan <alistair@devzero.co.uk>
Tested-by: Daniel Exner <dex@dragonslave.de>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

11 years agohwmon: (abituguru3) Enable reading from AUX3 fan on Abit AT8 32X
Alistair John Strachan [Thu, 9 Oct 2008 13:33:59 +0000]
hwmon: (abituguru3) Enable reading from AUX3 fan on Abit AT8 32X

The table for the Abit AT8 32X was incorrectly missing an entry
for the sixth ("AUX3") fan. Add this entry, exporting the fan
reading to userspace.

Closes lm-sensors.org ticket #2339.

Signed-off-by: Alistair John Strachan <alistair@devzero.co.uk>
Tested-by: Daniel Exner <dex@dragonslave.de>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

11 years agohwmon: (adt7473) Fix some bogosity in documentation file
Darrick J. Wong [Thu, 9 Oct 2008 13:33:58 +0000]
hwmon: (adt7473) Fix some bogosity in documentation file

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

11 years agohwmon: Define sysfs interface for energy consumption register
Darrick J. Wong [Thu, 9 Oct 2008 13:33:58 +0000]
hwmon: Define sysfs interface for energy consumption register

Describe the sysfs files that were introduced in the ibmaem driver.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

11 years agohwmon: (it87) Prevent power-off on Shuttle SN68PT
Jean Delvare [Thu, 9 Oct 2008 13:33:58 +0000]
hwmon: (it87) Prevent power-off on Shuttle SN68PT

On the Shuttle SN68PT, FAN_CTL2 is apparently not connected to a fan,
but to something else. One user has reported instant system power-off
when changing the PWM2 duty cycle, so we disable it.

I use the board name string as the trigger in case the same board is
ever used in other systems.

This closes lm-sensors ticket #2349:
pwmconfig causes a hard poweroff
http://www.lm-sensors.org/ticket/2349

Signed-off-by: Jean Delvare <khali@linux-fr.org>