8 years agoRDMA/iwcm: Propagate ird/ord values upwards
Kumar Sanghvi [Sun, 25 Sep 2011 14:47:43 +0000]
RDMA/iwcm: Propagate ird/ord values upwards

Update struct iw_cm_event to support propagating the ird/ord values
upwards to the application.

Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>

8 years agoRDMA/cma: Fix crash in cma_req_handler
Hefty, Sean [Thu, 6 Oct 2011 16:32:33 +0000]
RDMA/cma: Fix crash in cma_req_handler

The RDMA CM uses the local qp_type to determine how to process an
incoming request.  This can result in an incoming REQ being treated as
a SIDR REQ and vice versa.  Fix this by switching off the event type
instead, and for good measure verify that the listener supports the
incoming connection request.

This problem showed up when a user space application mismatched the QP
types between a client and server app.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>

8 years agoLinux 3.1-rc9
Linus Torvalds [Wed, 5 Oct 2011 01:11:50 +0000]
Linux 3.1-rc9

8 years agoMerge git://github.com/davem330/net
Linus Torvalds [Tue, 4 Oct 2011 17:37:06 +0000]
Merge git://github.com/davem330/net

* git://github.com/davem330/net:
  pch_gbe: Fixed the issue on which a network freezes
  pch_gbe: Fixed the issue on which PC was frozen when link was downed.
  make PACKET_STATISTICS getsockopt report consistently between ring and non-ring
  net: xen-netback: correctly restart Tx after a VM restore/migrate
  bonding: properly stop queuing work when requested
  can bcm: fix incomplete tx_setup fix
  RDSRDMA: Fix cleanup of rds_iw_mr_pool
  net: Documentation: Fix type of variables
  ibmveth: Fix oops on request_irq failure
  ipv6: nullify ipv6_ac_list and ipv6_fl_list when creating new socket
  cxgb4: Fix EEH on IBM P7IOC
  can bcm: fix tx_setup off-by-one errors
  MAINTAINERS: tehuti: Alexander Indenbaum's address bounces
  dp83640: reduce driver noise
  ptp: fix L2 event message recognition

8 years agoMerge branch 'fix/asoc' of git://github.com/tiwai/sound
Linus Torvalds [Tue, 4 Oct 2011 16:59:22 +0000]
Merge branch 'fix/asoc' of git://github.com/tiwai/sound

* 'fix/asoc' of git://github.com/tiwai/sound:
  ASoC: omap_mcpdm_remove cannot be __devexit
  ASoC: Fix setting update bits for WM8753_LADC and WM8753_RADC
  ASoC: use a valid device for dev_err() in Zylonite

8 years agoMerge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Linus Torvalds [Tue, 4 Oct 2011 16:54:18 +0000]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/radeon/kms: fix channel_remap setup (v2)
  drm/radeon: Set cursor x/y to 0 when x/yorigin > 0.
  drm/radeon: Update AVIVO cursor coordinate origin before x/yorigin calculation.
  drm/radeon: Simplify cursor x/yorigin calculation.
  drm/radeon/kms: fix cursor image off-by-one error
  drm/radeon/kms: Fix logic error in DP HPD handler
  drm/radeon/kms: add retry limits for native DP aux defer
  drm/radeon/kms: fix regression in DP aux defer handling

8 years agoMerge branch 'spi/merge' of git://git.secretlab.ca/git/linux-2.6
Linus Torvalds [Tue, 4 Oct 2011 16:52:56 +0000]
Merge branch 'spi/merge' of git://git.secretlab.ca/git/linux-2.6

* 'spi/merge' of git://git.secretlab.ca/git/linux-2.6:
  spi-topcliff-pch: Fix overrun issue
  spi-topcliff-pch: Add recovery processing in case FIFO overrun error occurs
  spi-topcliff-pch: Fix CPU read complete condition issue
  spi-topcliff-pch: Fix SSN Control issue
  spi-topcliff-pch: add tx-memory clear after complete transmitting

8 years agoPCI: Disable MPS configuration by default
Jon Mason [Mon, 3 Oct 2011 14:50:20 +0000]
PCI: Disable MPS configuration by default

Add the ability to disable PCI-E MPS turning and using the BIOS
configured MPS defaults.  Due to the number of issues recently
discovered on some x86 chipsets, make this the default behavior.

Also, add the option for peer to peer DMA MPS configuration.  Peer to
peer DMA is outside the scope of this patch, but MPS configuration could
prevent it from working by having the MPS on one root port different
than the MPS on another.  To work around this, simply make the system
wide MPS the smallest possible value (128B).

Signed-off-by: Jon Mason <mason@myri.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agodrm/radeon/kms: fix channel_remap setup (v2)
Alex Deucher [Tue, 4 Oct 2011 14:46:34 +0000]
drm/radeon/kms: fix channel_remap setup (v2)

Most asics just use the hw default value which requires
no explicit programming.  For those that need a different
value, the vbios will program it properly.  As such,
there's no need to program these registers explicitly
in the driver.  Changing MC_SHARED_CHREMAP requires a reload
of all data in vram otherwise its contents will be scambled.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=40103

v2: drop now unused channel_remap functions.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

8 years agospi-topcliff-pch: Fix overrun issue
Tomoya MORINAGA [Tue, 6 Sep 2011 08:16:38 +0000]
spi-topcliff-pch: Fix overrun issue

We found that adding load, Rx data sometimes drops.(with DMA transfer mode)
The cause is that before starting Rx-DMA processing, Tx-DMA processing starts.
This causes FIFO overrun occurs.

This patch fixes the issue by modifying FIFO tx-threshold and DMA descriptor
size like below.

                      Current                   this patch
Rx-descriptor   4Byte+12Byte*341    -->    12Byte*340-4Byte-12Byte
Rx-threshold                   (Not modified)
Tx-descriptor   4Byte+12Byte*341    -->    16Byte-12Byte*340
Rx-threshold    12Byte              -->    2Byte

Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

8 years agospi-topcliff-pch: Add recovery processing in case FIFO overrun error occurs
Tomoya MORINAGA [Tue, 6 Sep 2011 08:16:37 +0000]
spi-topcliff-pch: Add recovery processing in case FIFO overrun error occurs

Add recovery processing in case FIFO overrun error occurs with DMA transfer mode.

Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

8 years agospi-topcliff-pch: Fix CPU read complete condition issue
Tomoya MORINAGA [Tue, 6 Sep 2011 08:16:36 +0000]
spi-topcliff-pch: Fix CPU read complete condition issue

We found Rx data sometimes drops.(with non-DMA transfer mode)
The cause is read complete condition is not true.

This patch fixes the issue.

Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

8 years agospi-topcliff-pch: Fix SSN Control issue
Tomoya MORINAGA [Tue, 6 Sep 2011 08:16:35 +0000]
spi-topcliff-pch: Fix SSN Control issue

During processing 1 command/data series,
SSN should keep LOW.
However, currently, SSN becomes HIGH.
This patch fixes the issue.

Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

8 years agospi-topcliff-pch: add tx-memory clear after complete transmitting
Tomoya MORINAGA [Tue, 6 Sep 2011 08:16:34 +0000]
spi-topcliff-pch: add tx-memory clear after complete transmitting

Currently, in case of reading date from SPI flash,
command is sent twice.
The cause is that tx-memory clear processing is missing .
This patch adds the tx-momory clear processing.

Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

8 years agolis3: fix regression of HP DriveGuard with 8bit chip
Takashi Iwai [Tue, 4 Oct 2011 01:09:14 +0000]
lis3: fix regression of HP DriveGuard with 8bit chip

Commit 2a7fade7e03 ("hwmon: lis3: Power on corrections") caused a
regression on HP laptops with 8bit chip.  Writing CTRL2_BOOT_8B bit seems
clearing the BIOS setup, and no proper interrupt for DriveGuard will be
triggered any more.

Since the init code there is basically only for embedded devices, put a
pdata check so that the problematic initialization will be skipped for
hp_accel stuff.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cc: Eric Piel <eric.piel@tremplin-utc.net>
Cc: Samu Onkalo <samu.p.onkalo@nokia.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoMerge branch 'hwmon-for-linus' of git://github.com/groeck/linux
Linus Torvalds [Mon, 3 Oct 2011 19:54:56 +0000]
Merge branch 'hwmon-for-linus' of git://github.com/groeck/linux

* 'hwmon-for-linus' of git://github.com/groeck/linux:
  hwmon: (coretemp) Avoid leaving around dangling pointer
  hwmon: (coretemp) Fixup platform device ID change

8 years agoMerge git://github.com/davem330/ide
Linus Torvalds [Mon, 3 Oct 2011 19:53:43 +0000]
Merge git://github.com/davem330/ide

* git://github.com/davem330/ide:
  ide-disk: Fix request requeuing

8 years agoMerge branch 'btrfs-3.0' of git://github.com/chrismason/linux
Linus Torvalds [Mon, 3 Oct 2011 19:17:44 +0000]
Merge branch 'btrfs-3.0' of git://github.com/chrismason/linux

* 'btrfs-3.0' of git://github.com/chrismason/linux:
  Btrfs: force a page fault if we have a shorty copy on a page boundary

8 years agoide-disk: Fix request requeuing
Borislav Petkov [Mon, 3 Oct 2011 18:28:18 +0000]
ide-disk: Fix request requeuing

Simon Kirby reported that on his RAID setup with idedisk underneath
the box OOMs after a couple of days of runtime. Running with
CONFIG_DEBUG_KMEMLEAK pointed to idedisk_prep_fn() which unconditionally
allocates an ide_cmd struct. However, ide_requeue_and_plug() can be
called more than once per request, either from the request issue or the
IRQ handler path and do blk_peek_request() ends up in idedisk_prep_fn()
repeatedly, allocating a struct ide_cmd everytime and "forgetting" the
previous pointer.

Make sure the code reuses the old allocated chunk.

Reported-and-tested-by: Simon Kirby <sim@hostway.ca>
Cc: <stable@kernel.org> [ 39.x, 3.0.x ]
Link: http://marc.info/?l=linux-kernel&m=131667641517919
Link: http://lkml.kernel.org/r/20110922072643.GA27232@hostway.ca
Signed-off-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agopch_gbe: Fixed the issue on which a network freezes
Toshiharu Okada [Sun, 25 Sep 2011 21:27:43 +0000]
pch_gbe: Fixed the issue on which a network freezes

The pch_gbe driver has an issue which a network stops,
when receiving traffic is high.
In the case, The link down and up are necessary to return a network.

This patch fixed this issue.

Signed-off-by: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agopch_gbe: Fixed the issue on which PC was frozen when link was downed.
Toshiharu Okada [Sun, 25 Sep 2011 21:27:42 +0000]
pch_gbe: Fixed the issue on which PC was frozen when link was downed.

When a link was downed during network use,
there is an issue on which PC freezes.

This patch fixed this issue.

Signed-off-by: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agomake PACKET_STATISTICS getsockopt report consistently between ring and non-ring
Willem de Bruijn [Fri, 30 Sep 2011 10:38:28 +0000]
make PACKET_STATISTICS getsockopt report consistently between ring and non-ring

This is a minor change.

Up until kernel 2.6.32, getsockopt(fd, SOL_PACKET, PACKET_STATISTICS,
...) would return total and dropped packets since its last invocation. The
introduction of socket queue overflow reporting [1] changed drop
rate calculation in the normal packet socket path, but not when using a
packet ring. As a result, the getsockopt now returns different statistics
depending on the reception method used. With a ring, it still returns the
count since the last call, as counts are incremented in tpacket_rcv and
reset in getsockopt. Without a ring, it returns 0 if no drops occurred
since the last getsockopt and the total drops over the lifespan of
the socket otherwise. The culprit is this line in packet_rcv, executed
on a drop:

drop_n_acct:
        po->stats.tp_drops = atomic_inc_return(&sk->sk_drops);

As it shows, the new drop number it taken from the socket drop counter,
which is not reset at getsockopt. I put together a small example
that demonstrates the issue [2]. It runs for 10 seconds and overflows
the queue/ring on every odd second. The reported drop rates are:
ring: 16, 0, 16, 0, 16, ...
non-ring: 0, 15, 0, 30, 0, 46, 0, 60, 0 , 74.

Note how the even ring counts monotonically increase. Because the
getsockopt adds tp_drops to tp_packets, total counts are similarly
reported cumulatively. Long story short, reinstating the original code, as
the below patch does, fixes the issue at the cost of additional per-packet
cycles. Another solution that does not introduce per-packet overhead
is be to keep the current data path, record the value of sk_drops at
getsockopt() at call N in a new field in struct packetsock and subtract
that when reporting at call N+1. I'll be happy to code that, instead,
it's just more messy.

[1] http://patchwork.ozlabs.org/patch/35665/
[2] http://kernel.googlecode.com/files/test-packetsock-getstatistics.c

Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonet: xen-netback: correctly restart Tx after a VM restore/migrate
David Vrabel [Fri, 30 Sep 2011 06:37:51 +0000]
net: xen-netback: correctly restart Tx after a VM restore/migrate

If a VM is saved and restored (or migrated) the netback driver will no
longer process any Tx packets from the frontend.  xenvif_up() does not
schedule the processing of any pending Tx requests from the front end
because the carrier is off.  Without this initial kick the frontend
just adds Tx requests to the ring without raising an event (until the
ring is full).

This was caused by 47103041e91794acdbc6165da0ae288d844c820b (net:
xen-netback: convert to hw_features) which reordered the calls to
xenvif_up() and netif_carrier_on() in xenvif_connect().

Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agobonding: properly stop queuing work when requested
Andy Gospodarek [Fri, 23 Sep 2011 10:53:34 +0000]
bonding: properly stop queuing work when requested

During a test where a pair of bonding interfaces using ARP monitoring
were both brought up and torn down (with an rmmod) repeatedly, a panic
in the timer code was noticed.  I tracked this down and determined that
any of the bonding functions that ran as workqueue handlers and requeued
more work might not properly exit when the module was removed.

There was a flag protected by the bond lock called kill_timers that is
set when the interface goes down or the module is removed, but many of
the functions that monitor link status now unlock the bond lock to take
rtnl first.  There is a chance that another CPU running the rmmod could
get the lock and set kill_timers after the first check has passed.

This patch does not allow any function to queue work that will make
itself run unless kill_timers is not set.  I also noticed while doing
this work that bond_resend_igmp_join_requests did not have a check for
kill_timers, so I added the needed call there as well.

Signed-off-by: Andy Gospodarek <andy@greyhouse.net>
Reported-by: Liang Zheng <lzheng@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agodrm/radeon: Set cursor x/y to 0 when x/yorigin > 0.
Michel Dänzer [Fri, 30 Sep 2011 15:16:53 +0000]
drm/radeon: Set cursor x/y to 0 when x/yorigin > 0.

Apart from the obvious cleanup, this should make the line

cursor_end = x - xorigin + w;

correct now.

Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

8 years agodrm/radeon: Update AVIVO cursor coordinate origin before x/yorigin calculation.
Michel Dänzer [Fri, 30 Sep 2011 15:16:52 +0000]
drm/radeon: Update AVIVO cursor coordinate origin before x/yorigin calculation.

Fixes cursor disappearing prematurely when moving off a top/left edge which
is not located at the desktop top/left edge.

Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Cc: stable@kernel.org
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

8 years agodrm/radeon: Simplify cursor x/yorigin calculation.
Michel Dänzer [Fri, 30 Sep 2011 15:16:51 +0000]
drm/radeon: Simplify cursor x/yorigin calculation.

Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

8 years agodrm/radeon/kms: fix cursor image off-by-one error
Nicholas Miell [Fri, 30 Sep 2011 02:07:14 +0000]
drm/radeon/kms: fix cursor image off-by-one error

The mouse cursor hotspot calculation when the cursor is partially off the
top or left side of the screen was off by one.

Fixes https://bugs.freedesktop.org/show_bug.cgi?id=41158

Signed-off-by: Nicholas Miell <nmiell@gmail.com>
Reviewed-by: Michel Dänzer <michel@daenzer.net>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

8 years agodrm/radeon/kms: Fix logic error in DP HPD handler
Alex Deucher [Mon, 3 Oct 2011 12:37:33 +0000]
drm/radeon/kms: Fix logic error in DP HPD handler

Only disable the pipe if the monitor is physically
disconnected.  The previous logic also disabled the
pipe if the link was trained.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=41248

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

8 years agodrm/radeon/kms: add retry limits for native DP aux defer
Alex Deucher [Mon, 3 Oct 2011 13:13:46 +0000]
drm/radeon/kms: add retry limits for native DP aux defer

The previous code could potentially loop forever.  Limit
the number of DP aux defer retries to 4 for native aux
transactions, same as i2c over aux transactions.

Noticed by: Brad Campbell <lists2009@fnarfbargle.com>

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Brad Campbell <lists2009@fnarfbargle.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

8 years agodrm/radeon/kms: fix regression in DP aux defer handling
Alex Deucher [Mon, 3 Oct 2011 13:13:45 +0000]
drm/radeon/kms: fix regression in DP aux defer handling

An incorrect ordering in the error checking code lead
to DP aux defer being skipped in the aux native write
path.  Move the bytes transferred check (ret == 0)
below the defer check.

Tracked down by: Brad Campbell <brad@fnarfbargle.com>

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=41121

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Brad Campbell <brad@fnarfbargle.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

8 years agoMerge branch 'for-linus' of git://git.infradead.org/users/sameo/mfd-2.6
Linus Torvalds [Mon, 3 Oct 2011 02:23:44 +0000]
Merge branch 'for-linus' of git://git.infradead.org/users/sameo/mfd-2.6

* 'for-linus' of git://git.infradead.org/users/sameo/mfd-2.6:
  mfd: Fix generic irq chip ack function name for jz4740-adc

8 years agoMerge branch 'for-linus' of git://github.com/tiwai/sound
Linus Torvalds [Mon, 3 Oct 2011 02:22:44 +0000]
Merge branch 'for-linus' of git://github.com/tiwai/sound

* 'for-linus' of git://github.com/tiwai/sound:
  ALSA: hda - Fix a regression of the position-buffer check

8 years agoASoC: omap_mcpdm_remove cannot be __devexit
Arnd Bergmann [Sun, 2 Oct 2011 14:45:31 +0000]
ASoC: omap_mcpdm_remove cannot be __devexit

omap_mcpdm_remove is used from asoc_mcpdm_probe, which is an
initcall, and must not be discarded when HOTPLUG is disabled.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

8 years agoASoC: Fix setting update bits for WM8753_LADC and WM8753_RADC
Axel Lin [Sun, 2 Oct 2011 12:41:04 +0000]
ASoC: Fix setting update bits for WM8753_LADC and WM8753_RADC

Current code set update bits for WM8753_LDAC and WM8753_RDAC twice,
but missed setting update bits for WM8753_LADC and WM8753_RADC.

I think it is a copy-paste bug in commit 776065
"ASoC: codecs: wm8753: Fix register cache incoherency".

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@kernel.org

8 years agoASoC: use a valid device for dev_err() in Zylonite
Arnd Bergmann [Sat, 1 Oct 2011 20:03:34 +0000]
ASoC: use a valid device for dev_err() in Zylonite

A recent conversion has introduced references to &pdev->dev, which does
not actually exist in all the contexts it's used in.

Replace this with card->dev where necessary, in order to let
the driver build again.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@kernel.org

8 years agoMerge branch 'perf-urgent-for-linus' of git://tesla.tglx.de/git/linux-2.6-tip
Linus Torvalds [Sun, 2 Oct 2011 00:46:13 +0000]
Merge branch 'perf-urgent-for-linus' of git://tesla.tglx.de/git/linux-2.6-tip

* 'perf-urgent-for-linus' of git://tesla.tglx.de/git/linux-2.6-tip:
  perf tools: Fix raw sample reading

8 years agoMerge branches 'irq-urgent-for-linus', 'x86-urgent-for-linus' and 'sched-urgent-for...
Linus Torvalds [Sat, 1 Oct 2011 15:37:25 +0000]
Merge branches 'irq-urgent-for-linus', 'x86-urgent-for-linus' and 'sched-urgent-for-linus' of git://tesla.tglx.de/git/linux-2.6-tip

* 'irq-urgent-for-linus' of git://tesla.tglx.de/git/linux-2.6-tip:
  irq: Fix check for already initialized irq_domain in irq_domain_add
  irq: Add declaration of irq_domain_simple_ops to irqdomain.h

* 'x86-urgent-for-linus' of git://tesla.tglx.de/git/linux-2.6-tip:
  x86/rtc: Don't recursively acquire rtc_lock

* 'sched-urgent-for-linus' of git://tesla.tglx.de/git/linux-2.6-tip:
  posix-cpu-timers: Cure SMP wobbles
  sched: Fix up wchan borkage
  sched/rt: Migrate equal priority tasks to available CPUs

8 years agoBtrfs: force a page fault if we have a shorty copy on a page boundary
Josef Bacik [Fri, 30 Sep 2011 19:23:54 +0000]
Btrfs: force a page fault if we have a shorty copy on a page boundary

A user reported a problem where ceph was getting into 100% cpu usage while doing
some writing.  It turns out it's because we were doing a short write on a not
uptodate page, which means we'd fall back at one page at a time and fault the
page in.  The problem is our position is on the page boundary, so our fault in
logic wasn't actually reading the page, so we'd just spin forever or until the
page got read in by somebody else.  This will force a readpage if we end up
doing a short copy.  Alexandre could reproduce this easily with ceph and reports
it fixes his problem.  I also wrote a reproducer that no longer hangs my box
with this patch.  Thanks,

Reported-and-tested-by: Alexandre Oliva <aoliva@redhat.com>
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

8 years agoMerge branch 'perf/urgent' of git://github.com/acmel/linux into perf/urgent
Ingo Molnar [Fri, 30 Sep 2011 18:08:56 +0000]
Merge branch 'perf/urgent' of git://github.com/acmel/linux into perf/urgent

8 years agoposix-cpu-timers: Cure SMP wobbles
Peter Zijlstra [Thu, 1 Sep 2011 10:42:04 +0000]
posix-cpu-timers: Cure SMP wobbles

David reported:

  Attached below is a watered-down version of rt/tst-cpuclock2.c from
  GLIBC.  Just build it with "gcc -o test test.c -lpthread -lrt" or
  similar.

  Run it several times, and you will see cases where the main thread
  will measure a process clock difference before and after the nanosleep
  which is smaller than the cpu-burner thread's individual thread clock
  difference.  This doesn't make any sense since the cpu-burner thread
  is part of the top-level process's thread group.

  I've reproduced this on both x86-64 and sparc64 (using both 32-bit and
  64-bit binaries).

  For example:

  [davem@boricha build-x86_64-linux]$ ./test
  process: before(0.001221967) after(0.498624371) diff(497402404)
  thread:  before(0.000081692) after(0.498316431) diff(498234739)
  self:    before(0.001223521) after(0.001240219) diff(16698)
  [davem@boricha build-x86_64-linux]$

  The diff of 'process' should always be >= the diff of 'thread'.

  I make sure to wrap the 'thread' clock measurements the most tightly
  around the nanosleep() call, and that the 'process' clock measurements
  are the outer-most ones.

  ---
  #include <unistd.h>
  #include <stdio.h>
  #include <stdlib.h>
  #include <time.h>
  #include <fcntl.h>
  #include <string.h>
  #include <errno.h>
  #include <pthread.h>

  static pthread_barrier_t barrier;

  static void *chew_cpu(void *arg)
  {
  pthread_barrier_wait(&barrier);
  while (1)
  __asm__ __volatile__("" : : : "memory");
  return NULL;
  }

  int main(void)
  {
  clockid_t process_clock, my_thread_clock, th_clock;
  struct timespec process_before, process_after;
  struct timespec me_before, me_after;
  struct timespec th_before, th_after;
  struct timespec sleeptime;
  unsigned long diff;
  pthread_t th;
  int err;

  err = clock_getcpuclockid(0, &process_clock);
  if (err)
  return 1;

  err = pthread_getcpuclockid(pthread_self(), &my_thread_clock);
  if (err)
  return 1;

  pthread_barrier_init(&barrier, NULL, 2);
  err = pthread_create(&th, NULL, chew_cpu, NULL);
  if (err)
  return 1;

  err = pthread_getcpuclockid(th, &th_clock);
  if (err)
  return 1;

  pthread_barrier_wait(&barrier);

  err = clock_gettime(process_clock, &process_before);
  if (err)
  return 1;

  err = clock_gettime(my_thread_clock, &me_before);
  if (err)
  return 1;

  err = clock_gettime(th_clock, &th_before);
  if (err)
  return 1;

  sleeptime.tv_sec = 0;
  sleeptime.tv_nsec = 500000000;
  nanosleep(&sleeptime, NULL);

  err = clock_gettime(th_clock, &th_after);
  if (err)
  return 1;

  err = clock_gettime(my_thread_clock, &me_after);
  if (err)
  return 1;

  err = clock_gettime(process_clock, &process_after);
  if (err)
  return 1;

  diff = process_after.tv_nsec - process_before.tv_nsec;
  printf("process: before(%lu.%.9lu) after(%lu.%.9lu) diff(%lu)\n",
 process_before.tv_sec, process_before.tv_nsec,
 process_after.tv_sec, process_after.tv_nsec, diff);
  diff = th_after.tv_nsec - th_before.tv_nsec;
  printf("thread:  before(%lu.%.9lu) after(%lu.%.9lu) diff(%lu)\n",
 th_before.tv_sec, th_before.tv_nsec,
 th_after.tv_sec, th_after.tv_nsec, diff);
  diff = me_after.tv_nsec - me_before.tv_nsec;
  printf("self:    before(%lu.%.9lu) after(%lu.%.9lu) diff(%lu)\n",
 me_before.tv_sec, me_before.tv_nsec,
 me_after.tv_sec, me_after.tv_nsec, diff);

  return 0;
  }

This is due to us using p->se.sum_exec_runtime in
thread_group_cputime() where we iterate the thread group and sum all
data. This does not take time since the last schedule operation (tick
or otherwise) into account. We can cure this by using
task_sched_runtime() at the cost of having to take locks.

This also means we can (and must) do away with
thread_group_sched_runtime() since the modified thread_group_cputime()
is now more accurate and would deadlock when called from
thread_group_sched_runtime().

Aside of that it makes the function safe on 32 bit systems. The old
code added t->se.sum_exec_runtime unprotected. sum_exec_runtime is a
64bit value and could be changed on another cpu at the same time.

Reported-by: David Miller <davem@davemloft.net>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: stable@kernel.org
Link: http://lkml.kernel.org/r/1314874459.7945.22.camel@twins
Tested-by: David Miller <davem@davemloft.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

8 years agoALSA: hda - Fix a regression of the position-buffer check
Takashi Iwai [Fri, 30 Sep 2011 06:52:26 +0000]
ALSA: hda - Fix a regression of the position-buffer check

The commit a810364a0424c297242c6c66071a42f7675a5568
    ALSA: hda - Handle -1 as invalid position, too
caused a regression on some machines that require the position-buffer
instead of LPIB, e.g. resulting in noises with mic recording with
PulseAudio.

This patch fixes the detection by delaying the test at the timing as
same as 3.0, i.e. doing the position check only when requested in
azx_position_ok().

Reported-and-tested-by: Rocko Requin <rockorequin@hotmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

8 years agoResource: fix wrong resource window calculation
Ram Pai [Thu, 22 Sep 2011 07:48:58 +0000]
Resource: fix wrong resource window calculation

__find_resource() incorrectly returns a resource window which overlaps
an existing allocated window.  This happens when the parent's
resource-window spans 0x00000000 to 0xffffffff and is entirely allocated
to all its children resource-windows.

__find_resource() looks for gaps in resource allocation among the
children resource windows.  When it encounters the last child window it
blindly tries the range next to one allocated to the last child.  Since
the last child's window ends at 0xffffffff the calculation overflows,
leading the algorithm to believe that any window in the range 0x0000000
to 0xfffffff is available for allocation.  This leads to a conflicting
window allocation.

Michal Ludvig reported this issue seen on his platform.  The following
patch fixes the problem and has been verified by Michal.  I believe this
bug has been there for ages.  It got exposed by git commit 2bbc6942273b
("PCI : ability to relocate assigned pci-resources")

Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Tested-by: Michal Ludvig <mludvig@logix.net.nz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoMerge branch 'for-linus' of git://github.com/NewDreamNetwork/ceph-client
Linus Torvalds [Fri, 30 Sep 2011 02:58:58 +0000]
Merge branch 'for-linus' of git://github.com/NewDreamNetwork/ceph-client

* 'for-linus' of git://github.com/NewDreamNetwork/ceph-client:
  libceph: fix pg_temp mapping update
  libceph: fix pg_temp mapping calculation
  libceph: fix linger request requeuing
  libceph: fix parse options memory leak
  libceph: initialize ack_stamp to avoid unnecessary connection reset

8 years agoMerge branch 'v4l_for_linus' of git://linuxtv.org/mchehab/for_linus
Linus Torvalds [Fri, 30 Sep 2011 02:29:45 +0000]
Merge branch 'v4l_for_linus' of git://linuxtv.org/mchehab/for_linus

* 'v4l_for_linus' of git://linuxtv.org/mchehab/for_linus:
  [media] omap3isp: Fix build error in ispccdc.c
  [media] uvcvideo: Fix crash when linking entities
  [media] v4l: Make sure we hold a reference to the v4l2_device before using it
  [media] v4l: Fix use-after-free case in v4l2_device_release
  [media] uvcvideo: Set alternate setting 0 on resume if the bus has been reset
  [media] OMAP_VOUT: Fix build break caused by update_mode removal in DSS2

8 years agoMerge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6
Linus Torvalds [Fri, 30 Sep 2011 02:28:26 +0000]
Merge branch 'for-linus' of git://git390.marist.edu/linux-2.6

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
  [S390] cio: fix cio_tpi ignoring adapter interrupts
  [S390] gmap: always up mmap_sem properly
  [S390] Do not clobber personality flags on exec

8 years agoMerge git://github.com/davem330/sparc
Linus Torvalds [Fri, 30 Sep 2011 02:24:33 +0000]
Merge git://github.com/davem330/sparc

* git://github.com/davem330/sparc:
  sparc64: Force the execute bit in OpenFirmware's translation entries.
  sparc: Make '-p' boot option meaningful again.
  sparc, exec: remove redundant addr_limit assignment
  sparc64: Future proof Niagara cpu detection.

8 years agoMerge branch 'drm-intel-fixes' of git://people.freedesktop.org/~keithp/linux
Linus Torvalds [Fri, 30 Sep 2011 02:23:30 +0000]
Merge branch 'drm-intel-fixes' of git://people.freedesktop.org/~keithp/linux

* 'drm-intel-fixes' of git://people.freedesktop.org/~keithp/linux:
  drm/i915: FBC off for ironlake and older, otherwise on by default
  drm/i915: Enable SDVO hotplug interrupts for HDMI and DVI
  drm/i915: Enable dither whenever display bpc < frame buffer bpc

8 years agopowerpc: Fix device-tree matching for Apple U4 bridge
Benjamin Herrenschmidt [Thu, 29 Sep 2011 05:57:01 +0000]
powerpc: Fix device-tree matching for Apple U4 bridge

Apple Quad G5 has some oddity in it's device-tree which causes the new
generic matching code to fail to relate nodes for PCI-E devices below U4
with their respective struct pci_dev.  This breaks graphics on those
machines among others.

This fixes it using a quirk which copies the node pointer from the host
bridge for the root complex, which makes the generic code work for the
children afterward.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agobootup: move 'usermodehelper_enable()' a little earlier
wangyanqing [Thu, 29 Sep 2011 07:09:40 +0000]
bootup: move 'usermodehelper_enable()' a little earlier

Commit d5767c53535a ("bootup: move 'usermodehelper_enable()' to the end
of do_basic_setup()") moved 'usermodehelper_enable()' to end of
do_basic_setup() to after the initcalls.  But then I get failed to let
uvesafb work on my computer, and lose the splash boot.

So maybe we could start usermodehelper_enable a little early to make
some task work that need eary init with the help of user mode.

[ I would *really* prefer that initcalls not call into user space - even
  the real 'init' hasn't been execve'd yet, after all! But for uvesafb
  it really does look like we don't have much choice.

  I considered doing this when we mount the root filesystem, but
  depending on config options that is in multiple places.  We could do
  the usermode helper enable as a rootfs_initcall()..

  So I'm just using wang yanqing's trivial patch.  It's not wonderful,
  but it's simple and should work.  We should revisit this some day,
  though.      - Linus ]

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agocan bcm: fix incomplete tx_setup fix
Oliver Hartkopp [Thu, 29 Sep 2011 19:33:47 +0000]
can bcm: fix incomplete tx_setup fix

The commit aabdcb0b553b9c9547b1a506b34d55a764745870 ("can bcm: fix tx_setup
off-by-one errors") fixed only a part of the original problem reported by
Andre Naujoks. It turned out that the original code needed to be re-ordered
to reduce complexity and to finally fix the reported frame counting issues.

Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoperf tools: Fix raw sample reading
Jiri Olsa [Thu, 29 Sep 2011 15:05:08 +0000]
perf tools: Fix raw sample reading

Wrong pointer is being passed for raw data sanity checking, when parsing
sample event.

This ends up with invalid event and perf record being stuck in
__perf_session__process_events function during processing build IDs
(process_buildids function).

Following command hangs up in my setup:
./perf record -e raw_syscalls:sys_enter ls

The fix is to use proper pointer to the raw data instead of the 'u'
union.

Reviewed-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1317308709-9474-2-git-send-email-jolsa@redhat.com
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

8 years agosparc64: Force the execute bit in OpenFirmware's translation entries.
David S. Miller [Thu, 29 Sep 2011 19:18:59 +0000]
sparc64: Force the execute bit in OpenFirmware's translation entries.

In the OF 'translations' property, the template TTEs in the mappings
never specify the executable bit.  This is the case even though some
of these mappings are for OF's code segment.

Therefore, we need to force the execute bit on in every mapping.

This problem can only really trigger on Niagara/sun4v machines and the
history behind this is a little complicated.

Previous to sun4v, the sun4u TTE entries lacked a hardware execute
permission bit.  So OF didn't have to ever worry about setting
anything to handle executable pages.  Any valid TTE loaded into the
I-TLB would be respected by the chip.

But sun4v Niagara chips have a real hardware enforced executable bit
in their TTEs.  So it has to be set or else the I-TLB throws an
instruction access exception with type code 6 (protection violation).

We've been extremely fortunate to not get bitten by this in the past.

The best I can tell is that the OF's mappings for it's executable code
were mapped using permanent locked mappings on sun4v in the past.
Therefore, the fact that we didn't have the exec bit set in the OF
translations we would use did not matter in practice.

Thanks to Greg Onufer for helping me track this down.

Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoRDSRDMA: Fix cleanup of rds_iw_mr_pool
Jonathan Lallinger [Thu, 29 Sep 2011 07:58:41 +0000]
RDSRDMA: Fix cleanup of rds_iw_mr_pool

In the rds_iw_mr_pool struct the free_pinned field keeps track of
memory pinned by free MRs. While this field is incremented properly
upon allocation, it is never decremented upon unmapping. This would
cause the rds_rdma module to crash the kernel upon unloading, by
triggering the BUG_ON in the rds_iw_destroy_mr_pool function.

This change keeps track of the MRs that become unpinned, so that
free_pinned can be decremented appropriately.

Signed-off-by: Jonathan Lallinger <jonathan@ogc.us>
Signed-off-by: Steve Wise <swise@ogc.us>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonet: Documentation: Fix type of variables
Roy.Li [Wed, 28 Sep 2011 19:51:54 +0000]
net: Documentation: Fix type of variables

Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoibmveth: Fix oops on request_irq failure
Brian King [Wed, 28 Sep 2011 05:33:43 +0000]
ibmveth: Fix oops on request_irq failure

If request_irq fails, the ibmveth driver will overwrite
the rc and end up returning a successful rc on its open
function, resulting in an oops later when a packet gets
sent and buffers are not allocated due to the failed open.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoipv6: nullify ipv6_ac_list and ipv6_fl_list when creating new socket
Yan, Zheng [Sun, 25 Sep 2011 02:21:30 +0000]
ipv6: nullify ipv6_ac_list and ipv6_fl_list when creating new socket

ipv6_ac_list and ipv6_fl_list from listening socket are inadvertently
shared with new socket created for connection.

Signed-off-by: Zheng Yan <zheng.z.yan@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agocxgb4: Fix EEH on IBM P7IOC
Divy Le Ray [Sat, 24 Sep 2011 06:11:31 +0000]
cxgb4: Fix EEH on IBM P7IOC

Fix EEH recovery on new P Series platform by
requesting fundamental reset.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agocan bcm: fix tx_setup off-by-one errors
Oliver Hartkopp [Fri, 23 Sep 2011 08:23:47 +0000]
can bcm: fix tx_setup off-by-one errors

This patch fixes two off-by-one errors that canceled each other out.
Checking for the same condition two times in bcm_tx_timeout_tsklet() reduced
the count of frames to be sent by one. This did not show up the first time
tx_setup is invoked as an additional frame is sent due to TX_ANNONCE.
Invoking a second tx_setup on the same item led to a reduced (by 1) number of
sent frames.

Reported-by: Andre Naujoks <nautsch@gmail.com>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoMAINTAINERS: tehuti: Alexander Indenbaum's address bounces
Ian Campbell [Wed, 21 Sep 2011 22:08:26 +0000]
MAINTAINERS: tehuti: Alexander Indenbaum's address bounces

I got:
Generating server: Tehuti.onmicrosoft.com

baum@tehutinetworks.net
#< #5.1.1 smtp;550 5.1.1 RESOLVER.ADR.RecipNotFound; not found> #SMTP#

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Alexander Indenbaum <baum@tehutinetworks.net>
Cc: Andy Gospodarek <andy@greyhouse.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agodp83640: reduce driver noise
Richard Cochran [Tue, 20 Sep 2011 01:25:42 +0000]
dp83640: reduce driver noise

The driver has two warning messages that might be triggered
by normal use cases. When they appear, the messages give the
impression of a never ending series of errors.

This commit changes them to debug messages instead.

Signed-off-by: Richard Cochran <richard.cochran@omicron.at>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoptp: fix L2 event message recognition
Richard Cochran [Tue, 20 Sep 2011 01:25:41 +0000]
ptp: fix L2 event message recognition

The IEEE 1588 standard defines two kinds of messages, event and general
messages. Event messages require time stamping, and general do not. When
using UDP transport, two separate ports are used for the two message
types.

The BPF designed to recognize event messages incorrectly classifies L2
general messages as event messages. This commit fixes the issue by
extending the filter to check the message type field for L2 PTP packets.
Event messages are be distinguished from general messages by testing
the "general" bit.

Signed-off-by: Richard Cochran <richard.cochran@omicron.at>
Cc: <stable@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agobootup: move 'usermodehelper_enable()' to the end of do_basic_setup()
Linus Torvalds [Wed, 28 Sep 2011 17:23:44 +0000]
bootup: move 'usermodehelper_enable()' to the end of do_basic_setup()

Doing it just before starting to call into cpu_idle() made a sick kind
of sense only because the original bug we fixed (see commit
288d5abec831: "Boot up with usermodehelper disabled") was about problems
with some scheduler data structures not being initialized, and they had
better be initialized at that point.

But it really didn't make any other conceptual sense, and doing it after
the initial "schedule()" call for the idle thread actually opened up a
race: what if the main initialization thread did everything without
needing to sleep, and got all the way into user land too? Without
actually having scheduled back to the idle thread?

Now, in normal circumstances that doesn't ever happen, but it looks like
Richard Cochran triggered exactly that on his ARM IXP4xx machines:

  "I have some ARM IXP4xx based machines that use the two on chip MAC
   ports (aka NPEs).  The NPE needs a firmware in order to function.
   Ever since the following commit [that 288d5abec831 one], it is no
   longer possible to bring up the interfaces during the init scripts."

with a call trace showing an ioctl coming from user space. Richard says:

  "The init is busybox, and the startup script does mount, syslogd, and
   then ifup, so that all can go by quickly."

The fix is to move the usermodehelper_enable() into the main 'init'
thread, and just put it after we've done all our initcalls.  By then,
everything really should be up, but we've obviously not actually started
the user-mode portion of init yet.

Reported-and-tested-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agolibceph: fix pg_temp mapping update
Sage Weil [Wed, 28 Sep 2011 17:11:04 +0000]
libceph: fix pg_temp mapping update

The incremental map updates have a record for each pg_temp mapping that is
to be add/updated (len > 0) or removed (len == 0).  The old code was
written as if the updates were a complete enumeration; that was just wrong.
Update the code to remove 0-length entries and drop the rbtree traversal.

This avoids misdirected (and hung) requests that manifest as server
errors like

[WRN] client4104 10.0.1.219:0/275025290 misdirected client4104.1:129 0.1 to osd0 not [1,0] in e11/11

Signed-off-by: Sage Weil <sage@newdream.net>

8 years agolibceph: fix pg_temp mapping calculation
Sage Weil [Wed, 28 Sep 2011 17:08:27 +0000]
libceph: fix pg_temp mapping calculation

We need to apply the modulo pg_num calculation before looking up a pgid in
the pg_temp mapping rbtree.  This fixes pg_temp mappings, and fixes
(some) misdirected requests that result in messages like

[WRN] client4104 10.0.1.219:0/275025290 misdirected client4104.1:129 0.1 to osd0 not [1,0] in e11/11

on the server and stall make the client block without getting a reply (at
least until the pg_temp mapping goes way, but that can take a long long
time).

Reorder calc_pg_raw() a bit to make more sense.

Signed-off-by: Sage Weil <sage@newdream.net>

8 years agoMerge git://github.com/davem330/net
Linus Torvalds [Wed, 28 Sep 2011 15:39:05 +0000]
Merge git://github.com/davem330/net

* git://github.com/davem330/net:
  ipv6-multicast: Fix memory leak in IPv6 multicast.
  ipv6: check return value for dst_alloc
  net: check return value for dst_alloc
  ipv6-multicast: Fix memory leak in input path.
  bnx2x: add missing break in bnx2x_dcbnl_get_cap
  bnx2x: fix WOL by enablement PME in config space
  bnx2x: fix hw attention handling
  net: fix a typo in Documentation/networking/scaling.txt
  ath9k: Fix a dma warning/memory leak
  rtlwifi: rtl8192cu: Fix unitialized struct
  iwlagn: fix dangling scan request
  batman-adv: do_bcast has to be true for broadcast packets only
  cfg80211: Fix validation of AKM suites
  iwlegacy: do not use interruptible waits
  iwlegacy: fix command queue timeout
  ath9k_hw: Fix Rx DMA stuck for AR9003 chips

8 years agoMerge git://bedivere.hansenpartnership.com/git/scsi-rc-fixes-2.6
Linus Torvalds [Wed, 28 Sep 2011 15:23:39 +0000]
Merge git://bedivere.hansenpartnership.com/git/scsi-rc-fixes-2.6

* git://bedivere.hansenpartnership.com/git/scsi-rc-fixes-2.6:
  [SCSI] 3w-9xxx: fix iommu_iova leak
  [SCSI] cxgb3i: convert cdev->l2opt to use rcu to prevent NULL dereference
  [SCSI] scsi: qla4xxx needs libiscsi.o
  [SCSI] libsas: fix failure to revalidate domain for anything but the first expander child.
  [SCSI] aacraid: reset should disable MSI interrupt

8 years agohwmon: (coretemp) Avoid leaving around dangling pointer
Guenter Roeck [Sat, 24 Sep 2011 22:27:04 +0000]
hwmon: (coretemp) Avoid leaving around dangling pointer

Storing the struct temp_data pointer allocated from create_core_data()
when returning an error has the potential of leaving around a pointer
to freed memory. Reset it to NULL for error returns.

Reported-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Jean Delvare <khali@linux-fr.org>

8 years agohwmon: (coretemp) Fixup platform device ID change
Jean Delvare [Wed, 28 Sep 2011 15:11:00 +0000]
hwmon: (coretemp) Fixup platform device ID change

With recent change "hwmon: (coretemp) don't use kernel assigned CPU
number as platform device ID", the microcode check is now running on
random CPU. Fix that by checking the microcode before creating the
platform device rather than at probe time.

Also avoid calling TO_PHYS_ID(cpu) twice in the same function, it's
expensive.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Jan Beulich <jbeulich@suse.com>
Cc: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>

8 years agoMerge branch 'for-linus' of git://git.kernel.dk/linux-block
Linus Torvalds [Wed, 28 Sep 2011 15:03:00 +0000]
Merge branch 'for-linus' of git://git.kernel.dk/linux-block

* 'for-linus' of git://git.kernel.dk/linux-block:
  block: Free queue resources at blk_release_queue()

8 years agoMerge branch 'writeback-for-linus' of git://github.com/fengguang/linux
Linus Torvalds [Wed, 28 Sep 2011 15:01:05 +0000]
Merge branch 'writeback-for-linus' of git://github.com/fengguang/linux

* 'writeback-for-linus' of git://github.com/fengguang/linux:
  writeback: show raw dirtied_when in trace writeback_single_inode

8 years agoblock: Free queue resources at blk_release_queue()
Hannes Reinecke [Wed, 28 Sep 2011 14:07:01 +0000]
block: Free queue resources at blk_release_queue()

A kernel crash is observed when a mounted ext3/ext4 filesystem is
physically removed. The problem is that blk_cleanup_queue() frees up
some resources eg by calling elevator_exit(), which are not checked for
in normal operation. So we should rather move these calls to the
destructor function blk_release_queue() as at that point all remaining
references are gone. However, in doing so we have to ensure that any
externally supplied queue_lock is disconnected as the driver might free
up the lock after the call of blk_cleanup_queue(),

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

8 years agoMerge branch 'for-davem' of git://git.infradead.org/users/linville/wireless
David S. Miller [Wed, 28 Sep 2011 02:42:30 +0000]
Merge branch 'for-davem' of git://git.infradead.org/users/linville/wireless

8 years agoLinux 3.1-rc8
Linus Torvalds [Tue, 27 Sep 2011 22:48:34 +0000]
Linux 3.1-rc8

8 years agoMerge branch 'for-linus' of git://github.com/tiwai/sound
Linus Torvalds [Tue, 27 Sep 2011 22:46:21 +0000]
Merge branch 'for-linus' of git://github.com/tiwai/sound

* 'for-linus' of git://github.com/tiwai/sound:
  ASoC: ssm2602: Re-enable oscillator after suspend
  ALSA: usb-audio: Check for possible chip NULL pointer before clearing probing flag
  ALSA: hda/realtek - Don't detect LO jack when identical with HP
  ALSA: hda/realtek - Avoid bogus HP-pin assignment
  ALSA: HDA: No power nids on 92HD93
  ASoC: omap-mcbsp: Do not attempt to change DAI sysclk if stream is active

8 years agoMerge branch 'pm-fixes' of git://github.com/rjwysocki/linux-pm
Linus Torvalds [Tue, 27 Sep 2011 22:41:32 +0000]
Merge branch 'pm-fixes' of git://github.com/rjwysocki/linux-pm

* 'pm-fixes' of git://github.com/rjwysocki/linux-pm:
  PM / Clocks: Do not acquire a mutex under a spinlock

8 years agoMerge branch 'master' of git://git.infradead.org/users/linville/wireless into for...
John W. Linville [Tue, 27 Sep 2011 19:47:33 +0000]
Merge branch 'master' of git://git.infradead.org/users/linville/wireless into for-davem

8 years agoipv6-multicast: Fix memory leak in IPv6 multicast.
Ben Greear [Fri, 23 Sep 2011 13:11:01 +0000]
ipv6-multicast: Fix memory leak in IPv6 multicast.

If reg_vif_xmit cannot find a routing entry, be sure to
free the skb before returning the error.

Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoipv6: check return value for dst_alloc
Madalin Bucur [Mon, 26 Sep 2011 07:04:56 +0000]
ipv6: check return value for dst_alloc

return value of dst_alloc must be checked before use

Signed-off-by: Madalin Bucur <madalin.bucur@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonet: check return value for dst_alloc
Madalin Bucur [Mon, 26 Sep 2011 07:04:36 +0000]
net: check return value for dst_alloc

return value of dst_alloc must be checked before use

Signed-off-by: Madalin Bucur <madalin.bucur@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoipv6-multicast: Fix memory leak in input path.
Ben Greear [Tue, 27 Sep 2011 19:16:08 +0000]
ipv6-multicast: Fix memory leak in input path.

Have to free the skb before returning if we fail
the fib lookup.

Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoMerge branch 'batman-adv/maint' of git://git.open-mesh.org/linux-merge
David S. Miller [Tue, 27 Sep 2011 19:05:47 +0000]
Merge branch 'batman-adv/maint' of git://git.open-mesh.org/linux-merge

8 years agobnx2x: add missing break in bnx2x_dcbnl_get_cap
Shmulik Ravid [Thu, 22 Sep 2011 02:33:33 +0000]
bnx2x: add missing break in bnx2x_dcbnl_get_cap

Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agobnx2x: fix WOL by enablement PME in config space
Dmitry Kravkov [Thu, 22 Sep 2011 02:33:32 +0000]
bnx2x: fix WOL by enablement PME in config space

Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agobnx2x: fix hw attention handling
Dmitry Kravkov [Thu, 22 Sep 2011 02:33:31 +0000]
bnx2x: fix hw attention handling

Use register name to initialize attention mask

Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonet: fix a typo in Documentation/networking/scaling.txt
Jason Wang [Tue, 27 Sep 2011 17:26:27 +0000]
net: fix a typo in Documentation/networking/scaling.txt

Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoMerge branch 'fix/asoc' into for-linus
Takashi Iwai [Tue, 27 Sep 2011 16:21:41 +0000]
Merge branch 'fix/asoc' into for-linus

8 years agovfs: remove LOOKUP_NO_AUTOMOUNT flag
Linus Torvalds [Tue, 27 Sep 2011 15:12:33 +0000]
vfs: remove LOOKUP_NO_AUTOMOUNT flag

That flag no longer makes sense, since we don't look up automount points
as eagerly any more.  Additionally, it turns out that the NO_AUTOMOUNT
handling was buggy to begin with: it would avoid automounting even for
cases where we really *needed* to do the automount handling, and could
return ENOENT for autofs entries that hadn't been instantiated yet.

With our new non-eager automount semantics, one discussion has been
about adding a AT_AUTOMOUNT flag to vfs_fstatat (and thus the
newfstatat() and fstatat64() system calls), but it's probably not worth
it: you can always force at least directory automounting by simply
adding the final '/' to the filename, which works for *all* of the stat
family system calls, old and new.

So AT_NO_AUTOMOUNT (and thus LOOKUP_NO_AUTOMOUNT) really were just a
result of our bad default behavior.

Acked-by: Ian Kent <raven@themaw.net>
Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoASoC: ssm2602: Re-enable oscillator after suspend
Lars-Peter Clausen [Tue, 27 Sep 2011 09:08:46 +0000]
ASoC: ssm2602: Re-enable oscillator after suspend

Currently the the internal oscillator is powered down when entering BIAS_OFF
state, but not re-enabled when going back to BIAS_STANDBY. As a result the
CODEC will stop working after suspend if the internal oscillator is used to
generate the sysclock signal. This patch fixes it by clearing the appropriate
bit in the power down register when the CODEC is re-enabled.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@kernel.org

8 years agoVFS: Fix the remaining automounter semantics regressions
Trond Myklebust [Tue, 27 Sep 2011 00:36:09 +0000]
VFS: Fix the remaining automounter semantics regressions

The concensus seems to be that system calls such as stat() etc should
not trigger an automount.  Neither should the l* versions.

This patch therefore adds a LOOKUP_AUTOMOUNT flag to tag those lookups
that _should_ trigger an automount on the last path element.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
[ Edited to leave out the cases that are already covered by LOOKUP_OPEN,
  LOOKUP_DIRECTORY and LOOKUP_CREATE - all of which also fundamentally
  force automounting for their own reasons   - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agovfs pathname lookup: Add LOOKUP_AUTOMOUNT flag
Linus Torvalds [Tue, 27 Sep 2011 00:44:55 +0000]
vfs pathname lookup: Add LOOKUP_AUTOMOUNT flag

Since we've now turned around and made LOOKUP_FOLLOW *not* force an
automount, we want to add the ability to force an automount event on
lookup even if we don't happen to have one of the other flags that force
it implicitly (LOOKUP_OPEN, LOOKUP_DIRECTORY, LOOKUP_PARENT..)

Most cases will never want to use this, since you'd normally want to
delay automounting as long as possible, which usually implies
LOOKUP_OPEN (when we open a file or directory, we really cannot avoid
the automount any more).

But Trond argued sufficiently forcefully that at a minimum bind mounting
a file and quotactl will want to force the automount lookup.  Some other
cases (like nfs_follow_remote_path()) could use it too, although
LOOKUP_DIRECTORY would work there as well.

This commit just adds the flag and logic, no users yet, though.  It also
doesn't actually touch the LOOKUP_NO_AUTOMOUNT flag that is related, and
was made irrelevant by the same change that made us not follow on
LOOKUP_FOLLOW.

Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Ian Kent <raven@themaw.net>
Cc: Jeff Layton <jlayton@redhat.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Greg KH <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoMerge branch 'samsung-fixes-3' of git://github.com/kgene/linux-samsung
Linus Torvalds [Mon, 26 Sep 2011 23:29:26 +0000]
Merge branch 'samsung-fixes-3' of git://github.com/kgene/linux-samsung

* 'samsung-fixes-3' of git://github.com/kgene/linux-samsung:
  ARM: EXYNOS4: Rename sclk_cam clocks for FIMC driver
  ARM: S5PV210: Rename sclk_cam clocks for FIMC media driver
  ARM: S5P: fix incorrect loop iterator usage on gpio-interrupt
  ARM: S3C2443: Fix bit-reset in setrate of clk_armdiv

8 years agoARM: EXYNOS4: Rename sclk_cam clocks for FIMC driver
Sylwester Nawrocki [Mon, 26 Sep 2011 22:00:59 +0000]
ARM: EXYNOS4: Rename sclk_cam clocks for FIMC driver

The sclk_cam clocks are now controlled by the top level FIMC media
device driver bound to "s5p-fimc-md" platform device.
Rename sclk_cam clocks so they accessible by the corresponding
driver.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

8 years agoARM: S5PV210: Rename sclk_cam clocks for FIMC media driver
Sylwester Nawrocki [Mon, 26 Sep 2011 22:00:53 +0000]
ARM: S5PV210: Rename sclk_cam clocks for FIMC media driver

The sclk_cam clocks are now controlled by the top level FIMC media
device driver bound to "s5p-fimc-md" platform device.
Rename sclk_cam clocks so they accessible by the corresponding
driver.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

8 years agoMerge branch 'hwmon-for-linus' of git://github.com/groeck/linux
Linus Torvalds [Mon, 26 Sep 2011 20:35:43 +0000]
Merge branch 'hwmon-for-linus' of git://github.com/groeck/linux

* 'hwmon-for-linus' of git://github.com/groeck/linux:
  hwmon: (coretemp) remove struct platform_data * parameter from create_core_data()
  hwmon: (coretemp) constify static data
  hwmon: (coretemp) don't use kernel assigned CPU number as platform device ID
  hwmon: (ds620) Fix handling of negative temperatures
  hwmon: (w83791d) rename prototype parameter from 'register' to 'reg'
  hwmon: (coretemp) Don't use threshold registers for tempX_max
  hwmon: (coretemp) Let the user force TjMax
  hwmon: (coretemp) Drop duplicate function get_pkg_tjmax

8 years agoMerge branch 'kvm-updates/3.1' of git://github.com/avikivity/kvm
Linus Torvalds [Mon, 26 Sep 2011 20:33:44 +0000]
Merge branch 'kvm-updates/3.1' of git://github.com/avikivity/kvm

* 'kvm-updates/3.1' of git://github.com/avikivity/kvm:
  KVM: x86 emulator: fix Src2CL decode
  KVM: MMU: fix incorrect return of spte

8 years agoMerge branch 'fixes' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur...
Linus Torvalds [Mon, 26 Sep 2011 20:26:30 +0000]
Merge branch 'fixes' of ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm

* 'fixes' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm:
  ARM: 7099/1: futex: preserve oldval in SMP __futex_atomic_op
  ARM: dma-mapping: free allocated page if unable to map
  ARM: fix vmlinux.lds.S discarding sections
  ARM: nommu: fix warning with checksyscalls.sh
  ARM: 7091/1: errata: D-cache line maintenance operation by MVA may not succeed

8 years agoath9k: Fix a dma warning/memory leak
Mohammed Shafi Shajakhan [Fri, 23 Sep 2011 09:03:14 +0000]
ath9k: Fix a dma warning/memory leak

proper dma_unmapping and freeing of skb's has to be done in the rx
cleanup for EDMA chipsets when the device is unloaded and this also
seems to address the following warning which shows up occasionally when
the device is unloaded

Call Trace:
[<c0148cd2>] warn_slowpath_common+0x72/0xa0
[<c03b669c>] ? dma_debug_device_change+0x19c/0x200
[<c03b669c>] ? dma_debug_device_change+0x19c/0x200
[<c0148da3>] warn_slowpath_fmt+0x33/0x40
[<c03b669c>] dma_debug_device_change+0x19c/0x200
[<c0657f12>] notifier_call_chain+0x82/0xb0
[<c0171370>] __blocking_notifier_call_chain+0x60/0x90
[<c01713bf>] blocking_notifier_call_chain+0x1f/0x30
[<c044f594>] __device_release_driver+0xa4/0xc0
[<c044f647>] driver_detach+0x97/0xa0
[<c044e65c>] bus_remove_driver+0x6c/0xe0
[<c029af0b>] ? sysfs_addrm_finish+0x4b/0x60
[<c0450109>] driver_unregister+0x49/0x80
[<c0299f54>] ? sysfs_remove_file+0x14/0x20
[<c03c3ab2>] pci_unregister_driver+0x32/0x80
[<f92c2162>] ath_pci_exit+0x12/0x20 [ath9k]
[<f92c8467>] ath9k_exit+0x17/0x36 [ath9k]
[<c06523cd>] ? mutex_unlock+0xd/0x10
[<c018e27f>] sys_delete_module+0x13f/0x200
[<c02139bb>] ? sys_munmap+0x4b/0x60
[<c06547c5>] ? restore_all+0xf/0xf
[<c0657a20>] ? spurious_fault+0xe0/0xe0
[<c01832f4>] ? trace_hardirqs_on_caller+0xf4/0x180
[<c065b863>] sysenter_do_call+0x12/0x38
 ---[ end trace 16e1c1521c06bcf9 ]---
Mapped at:
[<c03b7938>] debug_dma_map_page+0x48/0x120
[<f92ba3e8>] ath_rx_init+0x3f8/0x4b0 [ath9k]
[<f92b5ae4>] ath9k_init_device+0x4c4/0x7b0 [ath9k]
[<f92c2813>] ath_pci_probe+0x263/0x330 [ath9k]

Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agortlwifi: rtl8192cu: Fix unitialized struct
Larry Finger [Fri, 23 Sep 2011 03:59:02 +0000]
rtlwifi: rtl8192cu: Fix unitialized struct

Driver rtl8192cu assigns a new struct rtl_tcb_desc object, but fails to
clear it.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@kernel.org> [2.6.39+]
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agoiwlagn: fix dangling scan request
Johannes Berg [Thu, 22 Sep 2011 21:59:04 +0000]
iwlagn: fix dangling scan request

If iwl_scan_initiate() fails for any reason,
priv->scan_request and priv->scan_vif are left
dangling. This can lead to a crash later when
iwl_bg_scan_completed() tries to run a pending
scan request.

In practice, this seems to be very rare due to
the STATUS_SCANNING check earlier. That check,
however, is wrong -- it should allow a scan to
be queued when a reset/roc scan is going on.
When a normal scan is already going on, a new
one can't be issued by mac80211, so that code
can be removed completely. I introduced this
bug when adding off-channel support in commit
266af4c745952e9bebf687dd68af58df553cb59d.

Cc: stable@kernel.org [3.0]
Reported-by: Peng Yan <peng.yan@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>