4 years agoalarmtimer: Lock k_itimer during timer callback
Richard Larocque [Wed, 10 Sep 2014 01:31:05 +0000]
alarmtimer: Lock k_itimer during timer callback

commit 474e941bed9262f5fa2394f9a4a67e24499e5926 upstream.

Locks the k_itimer's it_lock member when handling the alarm timer's
expiry callback.

The regular posix timers defined in posix-timers.c have this lock held
during timout processing because their callbacks are routed through
posix_timer_fn().  The alarm timers follow a different path, so they
ought to grab the lock somewhere else.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Sharvil Nanavati <sharvil@google.com>
Signed-off-by: Richard Larocque <rlarocque@google.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoalarmtimer: Do not signal SIGEV_NONE timers
Richard Larocque [Wed, 10 Sep 2014 01:31:04 +0000]
alarmtimer: Do not signal SIGEV_NONE timers

commit 265b81d23a46c39df0a735a3af4238954b41a4c2 upstream.

Avoids sending a signal to alarm timers created with sigev_notify set to
SIGEV_NONE by checking for that special case in the timeout callback.

The regular posix timers avoid sending signals to SIGEV_NONE timers by
not scheduling any callbacks for them in the first place.  Although it
would be possible to do something similar for alarm timers, it's simpler
to handle this as a special case in the timeout.

Prior to this patch, the alarm timer would ignore the sigev_notify value
and try to deliver signals to the process anyway.  Even worse, the
sanity check for the value of sigev_signo is skipped when SIGEV_NONE was
specified, so the signal number could be bogus.  If sigev_signo was an
unitialized value (as it often would be if SIGEV_NONE is used), then
it's hard to predict which signal will be sent.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Sharvil Nanavati <sharvil@google.com>
Signed-off-by: Richard Larocque <rlarocque@google.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoparisc: Only use -mfast-indirect-calls option for 32-bit kernel builds
John David Anglin [Tue, 23 Sep 2014 00:54:50 +0000]
parisc: Only use -mfast-indirect-calls option for 32-bit kernel builds

commit d26a7730b5874a5fa6779c62f4ad7c5065a94723 upstream.

In spite of what the GCC manual says, the -mfast-indirect-calls has
never been supported in the 64-bit parisc compiler. Indirect calls have
always been done using function descriptors irrespective of the
-mfast-indirect-calls option.

Recently, it was noticed that a function descriptor was always requested
when the -mfast-indirect-calls option was specified. This caused
problems when the option was used in  application code and doesn't make
any sense because the whole point of the option is to avoid using a
function descriptor for indirect calls.

Fixing this broke 64-bit kernel builds.

I will fix GCC but for now we need the attached change. This results in
the same kernel code as before.

Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agopowerpc/perf: Fix ABIv2 kernel backtraces
Anton Blanchard [Tue, 26 Aug 2014 02:44:15 +0000]
powerpc/perf: Fix ABIv2 kernel backtraces

commit 85101af13bb854a6572fa540df7c7201958624b9 upstream.

ABIv2 kernels are failing to backtrace through the kernel. An example:

39.30%  readseek2_proce  [kernel.kallsyms]    [k] find_get_entry
            |
            --- find_get_entry
               __GI___libc_read

The problem is in valid_next_sp() where we check that the new stack
pointer is at least STACK_FRAME_OVERHEAD below the previous one.

ABIv1 has a minimum stack frame size of 112 bytes consisting of 48 bytes
and 64 bytes of parameter save area. ABIv2 changes that to 32 bytes
with no paramter save area.

STACK_FRAME_OVERHEAD is in theory the minimum stack frame size,
but we over 240 uses of it, some of which assume that it includes
space for the parameter area.

We need to work through all our stack defines and rationalise them
but let's fix perf now by creating STACK_FRAME_MIN_SIZE and using
in valid_next_sp(). This fixes the issue:

30.64%  readseek2_proce  [kernel.kallsyms]    [k] find_get_entry
            |
            --- find_get_entry
               pagecache_get_page
               generic_file_read_iter
               new_sync_read
               vfs_read
               sys_read
               syscall_exit
               __GI___libc_read

Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agosched: Fix unreleased llc_shared_mask bit during CPU hotplug
Wanpeng Li [Wed, 24 Sep 2014 08:38:05 +0000]
sched: Fix unreleased llc_shared_mask bit during CPU hotplug

commit 03bd4e1f7265548832a76e7919a81f3137c44fd1 upstream.

The following bug can be triggered by hot adding and removing a large number of
xen domain0's vcpus repeatedly:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000004 IP: [..] find_busiest_group
PGD 5a9d5067 PUD 13067 PMD 0
Oops: 0000 [#3] SMP
[...]
Call Trace:
load_balance
? _raw_spin_unlock_irqrestore
idle_balance
__schedule
schedule
schedule_timeout
? lock_timer_base
schedule_timeout_uninterruptible
msleep
lock_device_hotplug_sysfs
online_store
dev_attr_store
sysfs_write_file
vfs_write
SyS_write
system_call_fastpath

Last level cache shared mask is built during CPU up and the
build_sched_domain() routine takes advantage of it to setup
the sched domain CPU topology.

However, llc_shared_mask is not released during CPU disable,
which leads to an invalid sched domainCPU topology.

This patch fix it by releasing the llc_shared_mask correctly
during CPU disable.

Yasuaki also reported that this can happen on real hardware:

  https://lkml.org/lkml/2014/7/22/1018

His case is here:

==
Here is an example on my system.
My system has 4 sockets and each socket has 15 cores and HT is
enabled. In this case, each core of sockes is numbered as
follows:

 | CPU#
Socket#0 | 0-14 , 60-74
Socket#1 | 15-29, 75-89
Socket#2 | 30-44, 90-104
Socket#3 | 45-59, 105-119

Then llc_shared_mask of CPU#30 has 0x3fff80000001fffc0000000.

It means that last level cache of Socket#2 is shared with
CPU#30-44 and 90-104.

When hot-removing socket#2 and #3, each core of sockets is
numbered as follows:

 | CPU#
Socket#0 | 0-14 , 60-74
Socket#1 | 15-29, 75-89

But llc_shared_mask is not cleared. So llc_shared_mask of CPU#30
remains having 0x3fff80000001fffc0000000.

After that, when hot-adding socket#2 and #3, each core of
sockets is numbered as follows:

 | CPU#
Socket#0 | 0-14 , 60-74
Socket#1 | 15-29, 75-89
Socket#2 | 30-59
Socket#3 | 90-119

Then llc_shared_mask of CPU#30 becomes
0x3fff8000fffffffc0000000. It means that last level cache of
Socket#2 is shared with CPU#30-59 and 90-104. So the mask has
the wrong value.

Signed-off-by: Wanpeng Li <wanpeng.li@linux.intel.com>
Tested-by: Linn Crosetto <linn@hp.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Toshi Kani <toshi.kani@hp.com>
Reviewed-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1411547885-48165-1-git-send-email-wanpeng.li@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoocfs2/dlm: do not get resource spinlock if lockres is new
Joseph Qi [Thu, 25 Sep 2014 23:05:16 +0000]
ocfs2/dlm: do not get resource spinlock if lockres is new

commit 5760a97c7143c208fa3a8f8cad0ed7dd672ebd28 upstream.

There is a deadlock case which reported by Guozhonghua:
  https://oss.oracle.com/pipermail/ocfs2-devel/2014-September/010079.html

This case is caused by &res->spinlock and &dlm->master_lock
misordering in different threads.

It was introduced by commit 8d400b81cc83 ("ocfs2/dlm: Clean up refmap
helpers").  Since lockres is new, it doesn't not require the
&res->spinlock.  So remove it.

Fixes: 8d400b81cc83 ("ocfs2/dlm: Clean up refmap helpers")
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Reviewed-by: joyce.xue <xuejiufei@huawei.com>
Reported-by: Guozhonghua <guozhonghua@h3c.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agonilfs2: fix data loss with mmap()
Andreas Rohner [Thu, 25 Sep 2014 23:05:14 +0000]
nilfs2: fix data loss with mmap()

commit 56d7acc792c0d98f38f22058671ee715ff197023 upstream.

This bug leads to reproducible silent data loss, despite the use of
msync(), sync() and a clean unmount of the file system.  It is easily
reproducible with the following script:

  ----------------[BEGIN SCRIPT]--------------------
  mkfs.nilfs2 -f /dev/sdb
  mount /dev/sdb /mnt

  dd if=/dev/zero bs=1M count=30 of=/mnt/testfile

  umount /mnt
  mount /dev/sdb /mnt
  CHECKSUM_BEFORE="$(md5sum /mnt/testfile)"

  /root/mmaptest/mmaptest /mnt/testfile 30 10 5

  sync
  CHECKSUM_AFTER="$(md5sum /mnt/testfile)"
  umount /mnt
  mount /dev/sdb /mnt
  CHECKSUM_AFTER_REMOUNT="$(md5sum /mnt/testfile)"
  umount /mnt

  echo "BEFORE MMAP:\t$CHECKSUM_BEFORE"
  echo "AFTER MMAP:\t$CHECKSUM_AFTER"
  echo "AFTER REMOUNT:\t$CHECKSUM_AFTER_REMOUNT"
  ----------------[END SCRIPT]--------------------

The mmaptest tool looks something like this (very simplified, with
error checking removed):

  ----------------[BEGIN mmaptest]--------------------
  data = mmap(NULL, file_size - file_offset, PROT_READ | PROT_WRITE,
              MAP_SHARED, fd, file_offset);

  for (i = 0; i < write_count; ++i) {
        memcpy(data + i * 4096, buf, sizeof(buf));
        msync(data, file_size - file_offset, MS_SYNC))
  }
  ----------------[END mmaptest]--------------------

The output of the script looks something like this:

  BEFORE MMAP:    281ed1d5ae50e8419f9b978aab16de83  /mnt/testfile
  AFTER MMAP:     6604a1c31f10780331a6850371b3a313  /mnt/testfile
  AFTER REMOUNT:  281ed1d5ae50e8419f9b978aab16de83  /mnt/testfile

So it is clear, that the changes done using mmap() do not survive a
remount.  This can be reproduced a 100% of the time.  The problem was
introduced in commit 136e8770cd5d ("nilfs2: fix issue of
nilfs_set_page_dirty() for page at EOF boundary").

If the page was read with mpage_readpage() or mpage_readpages() for
example, then it has no buffers attached to it.  In that case
page_has_buffers(page) in nilfs_set_page_dirty() will be false.
Therefore nilfs_set_file_dirty() is never called and the pages are never
collected and never written to disk.

This patch fixes the problem by also calling nilfs_set_file_dirty() if the
page has no buffers attached to it.

[akpm@linux-foundation.org: s/PAGE_SHIFT/PAGE_CACHE_SHIFT/]
Signed-off-by: Andreas Rohner <andreas.rohner@gmx.net>
Tested-by: Andreas Rohner <andreas.rohner@gmx.net>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agofs/notify: don't show f_handle if exportfs_encode_inode_fh failed
Andrey Vagin [Tue, 9 Sep 2014 21:51:06 +0000]
fs/notify: don't show f_handle if exportfs_encode_inode_fh failed

commit 7e8824816bda16bb11ff5ff1e1212d642e57b0b3 upstream.

Currently we handle only ENOSPC.  In case of other errors the file_handle
variable isn't filled properly and we will show a part of stack.

Signed-off-by: Andrey Vagin <avagin@openvz.org>
Acked-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agofsnotify/fdinfo: use named constants instead of hardcoded values
Andrey Vagin [Tue, 9 Sep 2014 21:51:04 +0000]
fsnotify/fdinfo: use named constants instead of hardcoded values

commit 1fc98d11cac6dd66342e5580cb2687e5b1e9a613 upstream.

MAX_HANDLE_SZ is equal to 128, but currently the size of pad is only 64
bytes, so exportfs_encode_inode_fh can return an error.

Signed-off-by: Andrey Vagin <avagin@openvz.org>
Acked-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agokcmp: fix standard comparison bug
Rasmus Villemoes [Tue, 9 Sep 2014 21:51:01 +0000]
kcmp: fix standard comparison bug

commit acbbe6fbb240a927ee1f5994f04d31267d422215 upstream.

The C operator <= defines a perfectly fine total ordering on the set of
values representable in a long.  However, unlike its namesake in the
integers, it is not translation invariant, meaning that we do not have
"b <= c" iff "a+b <= a+c" for all a,b,c.

This means that it is always wrong to try to boil down the relationship
between two longs to a question about the sign of their difference,
because the resulting relation [a LEQ b iff a-b <= 0] is neither
anti-symmetric or transitive.  The former is due to -LONG_MIN==LONG_MIN
(take any two a,b with a-b = LONG_MIN; then a LEQ b and b LEQ a, but a !=
b).  The latter can either be seen observing that x LEQ x+1 for all x,
implying x LEQ x+1 LEQ x+2 ...  LEQ x-1 LEQ x; or more directly with the
simple example a=LONG_MIN, b=0, c=1, for which a-b < 0, b-c < 0, but a-c >
0.

Note that it makes absolutely no difference that a transmogrying bijection
has been applied before the comparison is done.  In fact, had the
obfuscation not been done, one could probably not observe the bug
(assuming all values being compared always lie in one half of the address
space, the mathematical value of a-b is always representable in a long).
As it stands, one can easily obtain three file descriptors exhibiting the
non-transitivity of kcmp().

Side note 1: I can't see that ensuring the MSB of the multiplier is
set serves any purpose other than obfuscating the obfuscating code.

Side note 2:
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <fcntl.h>
#include <unistd.h>
#include <assert.h>
#include <sys/syscall.h>

enum kcmp_type {
        KCMP_FILE,
        KCMP_VM,
        KCMP_FILES,
        KCMP_FS,
        KCMP_SIGHAND,
        KCMP_IO,
        KCMP_SYSVSEM,
        KCMP_TYPES,
};
pid_t pid;

int kcmp(pid_t pid1, pid_t pid2, int type,
 unsigned long idx1, unsigned long idx2)
{
return syscall(SYS_kcmp, pid1, pid2, type, idx1, idx2);
}
int cmp_fd(int fd1, int fd2)
{
int c = kcmp(pid, pid, KCMP_FILE, fd1, fd2);
if (c < 0) {
perror("kcmp");
exit(1);
}
assert(0 <= c && c < 3);
return c;
}
int cmp_fdp(const void *a, const void *b)
{
static const int normalize[] = {0, -1, 1};
return normalize[cmp_fd(*(int*)a, *(int*)b)];
}
#define MAX 100 /* This is plenty; I've seen it trigger for MAX==3 */
int main(int argc, char *argv[])
{
int r, s, count = 0;
int REL[3] = {0,0,0};
int fd[MAX];
pid = getpid();
while (count < MAX) {
r = open("/dev/null", O_RDONLY);
if (r < 0)
break;
fd[count++] = r;
}
printf("opened %d file descriptors\n", count);
for (r = 0; r < count; ++r) {
for (s = r+1; s < count; ++s) {
REL[cmp_fd(fd[r], fd[s])]++;
}
}
printf("== %d\t< %d\t> %d\n", REL[0], REL[1], REL[2]);
qsort(fd, count, sizeof(fd[0]), cmp_fdp);
memset(REL, 0, sizeof(REL));

for (r = 0; r < count; ++r) {
for (s = r+1; s < count; ++s) {
REL[cmp_fd(fd[r], fd[s])]++;
}
}
printf("== %d\t< %d\t> %d\n", REL[0], REL[1], REL[2]);
return (REL[0] + REL[2] != 0);
}

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Cyrill Gorcunov <gorcunov@openvz.org>
"Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoRevert "mac80211: disable uAPSD if all ACs are under ACM"
Johannes Berg [Mon, 25 Aug 2014 10:08:09 +0000]
Revert "mac80211: disable uAPSD if all ACs are under ACM"

commit bb512ad0732232f1d2693bb68f31a76bed8f22ae upstream.

This reverts commit 24aa11ab8ae03292d38ec0dbd9bc2ac49fe8a6dd.

That commit was wrong since it uses data that hasn't even been set
up yet, but might be a hold-over from a previous connection.

Additionally, it seems like a driver-specific workaround that
shouldn't have been in mac80211 to start with.

Fixes: 24aa11ab8ae0 ("mac80211: disable uAPSD if all ACs are under ACM")
Reviewed-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agousb: dwc3: core: fix ordering for PHY suspend
Felipe Balbi [Wed, 3 Sep 2014 21:13:37 +0000]
usb: dwc3: core: fix ordering for PHY suspend

commit dc99f16f076559235c92d3eb66d03d1310faea08 upstream.

We can't suspend the PHYs before dwc3_core_exit_mode()
has been called, that's because the host and/or device
sides might still need to communicate with the far end
link partner.

Fixes: 8ba007a (usb: dwc3: core: enable the USB2 and USB3 phy in probe)
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agousb: dwc3: core: fix order of PM runtime calls
Felipe Balbi [Tue, 2 Sep 2014 19:57:20 +0000]
usb: dwc3: core: fix order of PM runtime calls

commit fed33afce0eda44a46ae24d93aec1b5198c0bac4 upstream.

Currently, we disable pm_runtime before all register
accesses are done, this is dangerous and might lead
to abort exceptions due to the driver trying to access
a register which is clocked by a clock which was long
gated.

Fix that by moving pm_runtime_put_sync() and pm_runtime_disable()
as the last thing we do before returning from our ->remove()
method.

Fixes: 72246da (usb: Introduce DesignWare USB3 DRD Driver)
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agousb: host: xhci: fix compliance mode workaround
Felipe Balbi [Wed, 27 Aug 2014 21:38:04 +0000]
usb: host: xhci: fix compliance mode workaround

commit 96908589a8b2584b1185f834d365f5cc360e8226 upstream.

Commit 71c731a (usb: host: xhci: Fix Compliance Mode
on SN65LVP3502CP Hardware) implemented a workaround
for a known issue with Texas Instruments' USB 3.0
redriver IC but it left a condition where any xHCI
host would be taken out of reset if port was placed
in compliance mode and there was no device connected
to the port.

That condition would trigger a fake connection to a
non-existent device so that usbcore would trigger a
warm reset of the port, thus taking the link out of
reset.

This has the side-effect of preventing any xHCI host
connected to a Linux machine from starting and running
the USB 3.0 Electrical Compliance Suite because the
port will mysteriously taken out of compliance mode
and, thus, xHCI won't step through the necessary
compliance patterns for link validation.

This patch fixes the issue by just adding a missing
check for XHCI_COMP_MODE_QUIRK inside
xhci_hub_report_usb3_link_state() when PORT_CAS isn't
set.

This patch should be backported to all kernels containing
commit 71c731a.

Fixes: 71c731a (usb: host: xhci: Fix Compliance Mode on SN65LVP3502CP Hardware)
Cc: Alexis R. Cortes <alexis.cortes@ti.com>
Cc: <stable@vger.kernel.org> # v3.2+
Signed-off-by: Felipe Balbi <balbi@ti.com>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agogenhd: fix leftover might_sleep() in blk_free_devt()
Jens Axboe [Tue, 16 Sep 2014 19:38:51 +0000]
genhd: fix leftover might_sleep() in blk_free_devt()

commit 46f341ffcfb5d8530f7d1e60f3be06cce6661b62 upstream.

Commit 2da78092 changed the locking from a mutex to a spinlock,
so we now longer sleep in this context. But there was a leftover
might_sleep() in there, which now triggers since we do the final
free from an RCU callback. Get rid of it.

Reported-by: Pontus Fuchs <pontus.fuchs@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agolockd: fix rpcbind crash on lockd startup failure
J. Bruce Fields [Fri, 29 Aug 2014 20:25:50 +0000]
lockd: fix rpcbind crash on lockd startup failure

commit 7c17705e77b12b20fb8afb7c1b15dcdb126c0c12 upstream.

Nikita Yuschenko reported that booting a kernel with init=/bin/sh and
then nfs mounting without portmap or rpcbind running using a busybox
mount resulted in:

  # mount -t nfs 10.30.130.21:/opt /mnt
  svc: failed to register lockdv1 RPC service (errno 111).
  lockd_up: makesock failed, error=-111
  Unable to handle kernel paging request for data at address 0x00000030
  Faulting instruction address: 0xc055e65c
  Oops: Kernel access of bad area, sig: 11 [#1]
  MPC85xx CDS
  Modules linked in:
  CPU: 0 PID: 1338 Comm: mount Not tainted 3.10.44.cge #117
  task: cf29cea0 ti: cf35c000 task.ti: cf35c000
  NIP: c055e65c LR: c0566490 CTR: c055e648
  REGS: cf35dad0 TRAP: 0300   Not tainted  (3.10.44.cge)
  MSR: 00029000 <CE,EE,ME>  CR: 22442488  XER: 20000000
  DEAR: 00000030, ESR: 00000000

  GPR00: c05606f4 cf35db80 cf29cea0 cf0ded80 cf0dedb8 00000001 1dec3086
  00000000
  GPR08: 00000000 c07b1640 00000007 1dec3086 22442482 100b9758 00000000
  10090ae8
  GPR16: 00000000 000186a5 00000000 00000000 100c3018 bfa46edc 100b0000
  bfa46ef0
  GPR24: cf386ae0 c07834f0 00000000 c0565f88 00000001 cf0dedb8 00000000
  cf0ded80
  NIP [c055e65c] call_start+0x14/0x34
  LR [c0566490] __rpc_execute+0x70/0x250
  Call Trace:
  [cf35db80] [00000080] 0x80 (unreliable)
  [cf35dbb0] [c05606f4] rpc_run_task+0x9c/0xc4
  [cf35dbc0] [c0560840] rpc_call_sync+0x50/0xb8
  [cf35dbf0] [c056ee90] rpcb_register_call+0x54/0x84
  [cf35dc10] [c056f24c] rpcb_register+0xf8/0x10c
  [cf35dc70] [c0569e18] svc_unregister.isra.23+0x100/0x108
  [cf35dc90] [c0569e38] svc_rpcb_cleanup+0x18/0x30
  [cf35dca0] [c0198c5c] lockd_up+0x1dc/0x2e0
  [cf35dcd0] [c0195348] nlmclnt_init+0x2c/0xc8
  [cf35dcf0] [c015bb5c] nfs_start_lockd+0x98/0xec
  [cf35dd20] [c015ce6c] nfs_create_server+0x1e8/0x3f4
  [cf35dd90] [c0171590] nfs3_create_server+0x10/0x44
  [cf35dda0] [c016528c] nfs_try_mount+0x158/0x1e4
  [cf35de20] [c01670d0] nfs_fs_mount+0x434/0x8c8
  [cf35de70] [c00cd3bc] mount_fs+0x20/0xbc
  [cf35de90] [c00e4f88] vfs_kern_mount+0x50/0x104
  [cf35dec0] [c00e6e0c] do_mount+0x1d0/0x8e0
  [cf35df10] [c00e75ac] SyS_mount+0x90/0xd0
  [cf35df40] [c000ccf4] ret_from_syscall+0x0/0x3c

The addition of svc_shutdown_net() resulted in two calls to
svc_rpcb_cleanup(); the second is no longer necessary and crashes when
it calls rpcb_register_call with clnt=NULL.

Reported-by: Nikita Yushchenko <nyushchenko@dev.rtsoft.ru>
Fixes: 679b033df484 "lockd: ensure we tear down any live sockets when socket creation fails during lockd_up"
Acked-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agortlwifi: rtl8192cu: Add new ID
Larry Finger [Sun, 24 Aug 2014 22:49:43 +0000]
rtlwifi: rtl8192cu: Add new ID

commit c66517165610b911e4c6d268f28d8c640832dbd1 upstream.

The Sitecom WLA-2102 adapter uses this driver.

Reported-by: Nico Baggus <nico-linux@noci.xs4all.nl>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Nico Baggus <nico-linux@noci.xs4all.nl>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agopercpu: perform tlb flush after pcpu_map_pages() failure
Tejun Heo [Fri, 15 Aug 2014 20:06:10 +0000]
percpu: perform tlb flush after pcpu_map_pages() failure

commit 849f5169097e1ba35b90ac9df76b5bb6f9c0aabd upstream.

If pcpu_map_pages() fails midway, it unmaps the already mapped pages.
Currently, it doesn't flush tlb after the partial unmapping.  This may
be okay in most cases as the established mapping hasn't been used at
that point but it can go wrong and when it goes wrong it'd be
extremely difficult to track down.

Flush tlb after the partial unmapping.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agopercpu: fix pcpu_alloc_pages() failure path
Tejun Heo [Fri, 15 Aug 2014 20:06:06 +0000]
percpu: fix pcpu_alloc_pages() failure path

commit f0d279654dea22b7a6ad34b9334aee80cda62cde upstream.

When pcpu_alloc_pages() fails midway, pcpu_free_pages() is invoked to
free what has already been allocated.  The invocation is across the
whole requested range and pcpu_free_pages() will try to free all
non-NULL pages; unfortunately, this is incorrect as
pcpu_get_pages_and_bitmap(), unlike what its comment suggests, doesn't
clear the pages array and thus the array may have entries from the
previous invocations making the partial failure path free incorrect
pages.

Fix it by open-coding the partial freeing of the already allocated
pages.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agopercpu: free percpu allocation info for uniprocessor system
Honggang Li [Tue, 12 Aug 2014 13:36:15 +0000]
percpu: free percpu allocation info for uniprocessor system

commit 3189eddbcafcc4d827f7f19facbeddec4424eba8 upstream.

Currently, only SMP system free the percpu allocation info.
Uniprocessor system should free it too. For example, one x86 UML
virtual machine with 256MB memory, UML kernel wastes one page memory.

Signed-off-by: Honggang Li <enjoymindful@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoata_piix: Add Device IDs for Intel 9 Series PCH
James Ralston [Wed, 27 Aug 2014 21:31:58 +0000]
ata_piix: Add Device IDs for Intel 9 Series PCH

commit 6cad1376954e591c3c41500c4e586e183e7ffe6d upstream.

This patch adds the IDE mode SATA Device IDs for the Intel 9 Series PCH.

Signed-off-by: James Ralston <james.d.ralston@intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoInput: i8042 - add nomux quirk for Avatar AVIU-145A6
Hans de Goede [Thu, 11 Sep 2014 17:10:26 +0000]
Input: i8042 - add nomux quirk for Avatar AVIU-145A6

commit d2682118f4bb3ceb835f91c1a694407a31bb7378 upstream.

The sys_vendor / product_name are somewhat generic unfortunately, so this
may lead to some false positives. But nomux usually does no harm, where as
not having it clearly is causing problems on the Avatar AVIU-145A6.

https://bugzilla.kernel.org/show_bug.cgi?id=77391

Reported-by: Hugo P <saurosii@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoInput: i8042 - add Fujitsu U574 to no_timeout dmi table
Hans de Goede [Wed, 10 Sep 2014 20:53:37 +0000]
Input: i8042 - add Fujitsu U574 to no_timeout dmi table

commit cc18a69c92d0972bc2fc5a047ee3be1e8398171b upstream.

https://bugzilla.kernel.org/show_bug.cgi?id=69731

Reported-by: Jason Robinson <mail@jasonrobinson.me>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoInput: atkbd - do not try 'deactivate' keyboard on any LG laptops
Dmitry Torokhov [Wed, 10 Sep 2014 20:50:37 +0000]
Input: atkbd - do not try 'deactivate' keyboard on any LG laptops

commit c01206796139e2b1feb7539bc72174fef1c6dc6e upstream.

We are getting more and more reports about LG laptops not having
functioning keyboard if we try to deactivate keyboard during probe.
Given that having keyboard deactivated is merely "nice to have"
instead of a hard requirement for probing, let's disable it on all
LG boxes instead of trying to hunt down particular models.

This change is prompted by patches trying to add "LG Electronics"/"ROCKY"
and "LG Electronics"/"LW60-F27B" to the DMI list.

https://bugzilla.kernel.org/show_bug.cgi?id=77051

Reported-by: Jaime Velasco Juan <jsagarribay@gmail.com>
Reported-by: Georgios Tsalikis <georgios@tsalikis.net>
Tested-by: Jaime Velasco Juan <jsagarribay@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoInput: elantech - fix detection of touchpad on ASUS s301l
Hans de Goede [Mon, 8 Sep 2014 21:39:52 +0000]
Input: elantech - fix detection of touchpad on ASUS s301l

commit 271329b3c798b2102120f5df829071c211ef00ed upstream.

Adjust Elantech signature validation to account fo rnewer models of
touchpads.

Reported-and-tested-by: Màrius Monton <marius.monton@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoInput: synaptics - add support for ForcePads
Dmitry Torokhov [Sat, 30 Aug 2014 20:51:06 +0000]
Input: synaptics - add support for ForcePads

commit 5715fc764f7753d464dbe094b5ef9cffa6e479a4 upstream.

ForcePads are found on HP EliteBook 1040 laptops. They lack any kind of
physical buttons, instead they generate primary button click when user
presses somewhat hard on the surface of the touchpad. Unfortunately they
also report primary button click whenever there are 2 or more contacts
on the pad, messing up all multi-finger gestures (2-finger scrolling,
multi-finger tapping, etc). To cope with this behavior we introduce a
delay (currently 50 msecs) in reporting primary press in case more
contacts appear.

Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoInput: serport - add compat handling for SPIOCSTYPE ioctl
John Sung [Tue, 9 Sep 2014 17:06:51 +0000]
Input: serport - add compat handling for SPIOCSTYPE ioctl

commit a80d8b02751060a178bb1f7a6b7a93645a7a308b upstream.

When running a 32-bit inputattach utility in a 64-bit system, there will be
error code "inputattach: can't set device type". This is caused by the
serport device driver not supporting compat_ioctl, so that SPIOCSTYPE ioctl
fails.

Signed-off-by: John Sung <penmount.touch@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agodm crypt: fix access beyond the end of allocated space
Mikulas Patocka [Thu, 28 Aug 2014 15:09:31 +0000]
dm crypt: fix access beyond the end of allocated space

commit d49ec52ff6ddcda178fc2476a109cf1bd1fa19ed upstream.

The DM crypt target accesses memory beyond allocated space resulting in
a crash on 32 bit x86 systems.

This bug is very old (it dates back to 2.6.25 commit 3a7f6c990ad04 "dm
crypt: use async crypto").  However, this bug was masked by the fact
that kmalloc rounds the size up to the next power of two.  This bug
wasn't exposed until 3.17-rc1 commit 298a9fa08a ("dm crypt: use per-bio
data").  By switching to using per-bio data there was no longer any
padding beyond the end of a dm-crypt allocated memory block.

To minimize allocation overhead dm-crypt puts several structures into one
block allocated with kmalloc.  The block holds struct ablkcipher_request,
cipher-specific scratch pad (crypto_ablkcipher_reqsize(any_tfm(cc))),
struct dm_crypt_request and an initialization vector.

The variable dmreq_start is set to offset of struct dm_crypt_request
within this memory block.  dm-crypt allocates the block with this size:
cc->dmreq_start + sizeof(struct dm_crypt_request) + cc->iv_size.

When accessing the initialization vector, dm-crypt uses the function
iv_of_dmreq, which performs this calculation: ALIGN((unsigned long)(dmreq
+ 1), crypto_ablkcipher_alignmask(any_tfm(cc)) + 1).

dm-crypt allocated "cc->iv_size" bytes beyond the end of dm_crypt_request
structure.  However, when dm-crypt accesses the initialization vector, it
takes a pointer to the end of dm_crypt_request, aligns it, and then uses
it as the initialization vector.  If the end of dm_crypt_request is not
aligned on a crypto_ablkcipher_alignmask(any_tfm(cc)) boundary the
alignment causes the initialization vector to point beyond the allocated
space.

Fix this bug by calculating the variable iv_size_padding and adding it
to the allocated size.

Also correct the alignment of dm_crypt_request.  struct dm_crypt_request
is specific to dm-crypt (it isn't used by the crypto subsystem at all),
so it is aligned on __alignof__(struct dm_crypt_request).

Also align per_bio_data_size on ARCH_KMALLOC_MINALIGN, so that it is
aligned as if the block was allocated with kmalloc.

Reported-by: Krzysztof Kolasa <kkolasa@winsoft.pl>
Tested-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoblock: Fix dev_t minor allocation lifetime
Keith Busch [Tue, 26 Aug 2014 15:05:36 +0000]
block: Fix dev_t minor allocation lifetime

commit 2da78092dda13f1efd26edbbf99a567776913750 upstream.

Releases the dev_t minor when all references are closed to prevent
another device from acquiring the same major/minor.

Since the partition's release may be invoked from call_rcu's soft-irq
context, the ext_dev_idr's mutex had to be replaced with a spinlock so
as not so sleep.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoworkqueue: apply __WQ_ORDERED to create_singlethread_workqueue()
Tejun Heo [Fri, 12 Sep 2014 19:14:30 +0000]
workqueue: apply __WQ_ORDERED to create_singlethread_workqueue()

commit e09c2c295468476a239d13324ce9042ec4de05eb upstream.

create_singlethread_workqueue() is a compat interface for single
threaded workqueue which maps to ordered workqueue w/ rescuer in the
current implementation.  create_singlethread_workqueue() currently
implemented by invoking alloc_workqueue() w/ appropriate parameters.

8719dceae2f9 ("workqueue: reject adjusting max_active or applying
attrs to ordered workqueues") introduced __WQ_ORDERED to protect
ordered workqueues against dynamic attribute changes which can break
ordering guarantees but forgot to apply it to
create_singlethread_workqueue().  This in itself is okay as nobody
currently uses dynamic attribute change on workqueues created with
create_singlethread_workqueue().

However, 4c16bd327c ("workqueue: implement NUMA affinity for unbound
workqueues") broke singlethreaded guarantee for ordered workqueues
through allocating a separate pool_workqueue on each NUMA node by
default.  A later change 8a2b75384444 ("workqueue: fix ordered
workqueues in NUMA setups") fixed it by allocating only one global
pool_workqueue if __WQ_ORDERED is set.

Combined, the __WQ_ORDERED omission in create_singlethread_workqueue()
became critical breaking its single threadedness and ordering
guarantee.

Let's make create_singlethread_workqueue() wrap
alloc_ordered_workqueue() instead so that it inherits __WQ_ORDERED and
can implicitly track future ordered_workqueue changes.

v2: I missed that __WQ_ORDERED now protects against pwq splitting
    across NUMA nodes and incorrectly described the patch as a
    nice-to-have fix to protect against future dynamic attribute
    usages.  Oleg pointed out that this is actually a critical
    breakage due to 8a2b75384444 ("workqueue: fix ordered workqueues
    in NUMA setups").

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Mike Anderson <mike.anderson@us.ibm.com>
Cc: Oleg Nesterov <onestero@redhat.com>
Cc: Gustavo Luiz Duarte <gduarte@redhat.com>
Cc: Tomas Henzl <thenzl@redhat.com>
Fixes: 4c16bd327c ("workqueue: implement NUMA affinity for unbound workqueues")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoRevert "iwlwifi: dvm: don't enable CTS to self"
Emmanuel Grumbach [Sun, 31 Aug 2014 19:11:11 +0000]
Revert "iwlwifi: dvm: don't enable CTS to self"

commit f47f46d7b09cf1d09e4b44b6cc4dd7d68a08028c upstream.

This reverts commit 43d826ca5979927131685cc2092c7ce862cb91cd.

This commit caused packet loss.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoSCSI: libiscsi: fix potential buffer overrun in __iscsi_conn_send_pdu
Mike Christie [Wed, 3 Sep 2014 05:00:39 +0000]
SCSI: libiscsi: fix potential buffer overrun in __iscsi_conn_send_pdu

commit db9bfd64b14a3a8f1868d2164518fdeab1b26ad1 upstream.

This patches fixes a potential buffer overrun in __iscsi_conn_send_pdu.
This function is used by iscsi drivers and userspace to send iscsi PDUs/
commands. For login commands, we have a set buffer size. For all other
commands we do not support data buffers.

This was reported by Dan Carpenter here:
http://www.spinics.net/lists/linux-scsi/msg66838.html

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoNFC: microread: Potential overflows in microread_target_discovered()
Dan Carpenter [Mon, 1 Sep 2014 17:27:29 +0000]
NFC: microread: Potential overflows in microread_target_discovered()

commit d07f1e8600ccb885c8f4143402b8912f7d827bcb upstream.

Smatch says that skb->data is untrusted so we need to check to make sure
that the memcpy() doesn't overflow.

Fixes: cfad1ba87150 ('NFC: Initial support for Inside Secure microread')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoiscsi-target: Fix memory corruption in iscsit_logout_post_handler_diffcid
Nicholas Bellinger [Wed, 17 Sep 2014 18:45:17 +0000]
iscsi-target: Fix memory corruption in iscsit_logout_post_handler_diffcid

commit b53b0d99d6fbf7d44330395349a895521cfdbc96 upstream.

This patch fixes a bug in iscsit_logout_post_handler_diffcid() where
a pointer used as storage for list_for_each_entry() was incorrectly
being used to determine if no matching entry had been found.

This patch changes iscsit_logout_post_handler_diffcid() to key off
bool conn_found to determine if the function needs to exit early.

Reported-by: Joern Engel <joern@logfs.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoiscsi-target: avoid NULL pointer in iscsi_copy_param_list failure
Joern Engel [Tue, 2 Sep 2014 21:49:54 +0000]
iscsi-target: avoid NULL pointer in iscsi_copy_param_list failure

commit 8ae757d09c45102b347a1bc2867f54ffc1ab8fda upstream.

In iscsi_copy_param_list() a failed iscsi_param_list memory allocation
currently invokes iscsi_release_param_list() to cleanup, and will promptly
trigger a NULL pointer dereference.

Instead, go ahead and return for the first iscsi_copy_param_list()
failure case.

Found by coverity.

Signed-off-by: Joern Engel <joern@logfs.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoTarget/iser: Don't put isert_conn inside disconnected handler
Sagi Grimberg [Wed, 2 Jul 2014 13:19:25 +0000]
Target/iser: Don't put isert_conn inside disconnected handler

commit 0fc4ea701fcf5bc51ace4e288af5be741465f776 upstream.

disconnected_handler is invoked on several CM events (such
as DISCONNECTED, DEVICE_REMOVAL, TIMEWAIT_EXIT...). Since
multiple  events can occur while before isert_free_conn is
invoked, we might put all isert_conn references and free
the connection too early.

Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoTarget/iser: Get isert_conn reference once got to connected_handler
Sagi Grimberg [Wed, 2 Jul 2014 13:19:24 +0000]
Target/iser: Get isert_conn reference once got to connected_handler

commit c2f88b17a1d97ca4ecd96cc22333a7a4f1407d39 upstream.

In case the connection didn't reach connected state, disconnected
handler will never be invoked thus the second kref_put on
isert_conn will be missing.

Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoiio:inkern: fix overwritten -EPROBE_DEFER in of_iio_channel_get_by_name
Johannes Pointner [Mon, 25 Aug 2014 08:04:00 +0000]
iio:inkern: fix overwritten -EPROBE_DEFER in of_iio_channel_get_by_name

commit 872687f626e033b4ddfaec1e410057cfc6636d77 upstream.

Fixes: a2c12493ed7e ('iio: of_iio_channel_get_by_name() returns non-null pointers for error legs')

which improperly assumes that of_iio_channel_get_by_name must always
return NULL and thus now hides -EPROBE_DEFER.

Signed-off-by: Johannes Pointner <johannes.pointner@br-automation.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoiio:magnetometer: bugfix magnetometers gain values
Denis CIOCCA [Thu, 9 Oct 2014 12:55:00 +0000]
iio:magnetometer: bugfix magnetometers gain values

commit a31d0928999fbf33b3a6042e8bcb7b7f7e07d094 upstream.

This patch fix gains values. The first driver was designed using
engineering samples, in mass production the values are changed.

Signed-off-by: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoiio: adc: ad_sigma_delta: Fix indio_dev->trig assignment
Srinivas Pandruvada [Fri, 22 Aug 2014 20:48:00 +0000]
iio: adc: ad_sigma_delta: Fix indio_dev->trig assignment

commit 9e5846be33277802c0c76e5c12825d0e4d27f639 upstream.

This can result in wrong reference count for trigger device, call
iio_trigger_get to increment reference.
Refer to http://www.spinics.net/lists/linux-iio/msg13669.html for discussion
with Jonathan.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoiio: st_sensors: Fix indio_dev->trig assignment
Srinivas Pandruvada [Fri, 22 Aug 2014 20:48:00 +0000]
iio: st_sensors: Fix indio_dev->trig assignment

commit f0e84acd7056e6d7ade551c6439531606ae30a46 upstream.

This can result in wrong reference count for trigger device, call
iio_trigger_get to increment reference.
Refer to http://www.spinics.net/lists/linux-iio/msg13669.html for discussion
with Jonathan.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoiio: meter: ade7758: Fix indio_dev->trig assignment
Srinivas Pandruvada [Fri, 22 Aug 2014 20:48:00 +0000]
iio: meter: ade7758: Fix indio_dev->trig assignment

commit 0495081179212b758775df752e657ea71dcae020 upstream.

This can result in wrong reference count for trigger device, call
iio_trigger_get to increment reference.
Refer to http://www.spinics.net/lists/linux-iio/msg13669.html for discussion
with Jonathan.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoiio: inv_mpu6050: Fix indio_dev->trig assignment
Srinivas Pandruvada [Fri, 22 Aug 2014 20:48:00 +0000]
iio: inv_mpu6050: Fix indio_dev->trig assignment

commit b07e3b3850b2e1f09c19f54d3ed7210d9f529e2c upstream.

This can result in wrong reference count for trigger device, call
iio_trigger_get to increment reference.
Refer to http://www.spinics.net/lists/linux-iio/msg13669.html for discussion
with Jonathan.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoiio: gyro: itg3200: Fix indio_dev->trig assignment
Srinivas Pandruvada [Fri, 22 Aug 2014 20:48:00 +0000]
iio: gyro: itg3200: Fix indio_dev->trig assignment

commit 0b4dce2ee694a991ef38203ec5ff91a738518cb3 upstream.

This can result in wrong reference count for trigger device, call
iio_trigger_get to increment reference.
Refer to http://www.spinics.net/lists/linux-iio/msg13669.html for discussion
with Jonathan.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoiio:trigger: modify return value for iio_trigger_get
Srinivas Pandruvada [Fri, 22 Aug 2014 20:48:00 +0000]
iio:trigger: modify return value for iio_trigger_get

commit f153566570fb9e32c2f59182883f4f66048788fb upstream.

Instead of a void function, return the trigger pointer.

Whilst not in of itself a fix, this makes the following set of
7 fixes cleaner than they would otherwise be.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoCIFS: Fix SMB2 readdir error handling
Pavel Shilovsky [Mon, 18 Aug 2014 16:49:57 +0000]
CIFS: Fix SMB2 readdir error handling

commit 52755808d4525f4d5b86d112d36ffc7a46f3fb48 upstream.

SMB2 servers indicates the end of a directory search with
STATUS_NO_MORE_FILE error code that is not processed now.
This causes generic/257 xfstest to fail. Fix this by triggering
the end of search by this error code in SMB2_query_directory.

Also when negotiating CIFS protocol we tell the server to close
the search automatically at the end and there is no need to do
it itself. In the case of SMB2 protocol, we need to close it
explicitly - separate close directory checks for different
protocols.

Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoCIFS: Fix directory rename error
Pavel Shilovsky [Fri, 22 Aug 2014 09:32:09 +0000]
CIFS: Fix directory rename error

commit a07d322059db66b84c9eb4f98959df468e88b34b upstream.

CIFS servers process nlink counts differently for files and directories.
In cifs_rename() if we the request fails on the existing target, we
try to remove it through cifs_unlink() but this is not what we want
to do for directories. As the result the following sequence of commands

mkdir {1,2}; mv -T 1 2; rmdir {1,2}; mkdir {1,2}; echo foo > 2/bar

and XFS test generic/023 fail with -ENOENT error. That's why the second
mkdir reuses the existing inode (target inode of the mv -T command) with
S_DEAD flag.

Fix this by checking whether the target is directory or not and
calling cifs_rmdir() rather than cifs_unlink() for directories.

Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoASoC: davinci-mcasp: Correct rx format unit configuration
Peter Ujfalusi [Thu, 4 Sep 2014 07:52:53 +0000]
ASoC: davinci-mcasp: Correct rx format unit configuration

commit fe0a29e163a5d045c73faab682a8dac71c2f8012 upstream.

In case of capture we should not use rotation. The reverse and mask is
enough to get the data align correctly from the bus to MCU:
Format   data from bus    after reverse (XRBUF)
S16_LE:  |LSB|MSB|xxx|xxx|  |xxx|xxx|MSB|LSB|
S24_3LE: |LSB|DAT|MSB|xxx|  |xxx|MSB|DAT|LSB|
S24_LE:  |LSB|DAT|MSB|xxx|  |xxx|MSB|DAT|LSB|
S32_LE:  |LSB|DAT|DAT|MSB|  |MSB|DAT|DAT|LSB|

With this patch all supported formats will work for playback and capture.

Reported-by: Jyri Sarha <jsarha@ti.com> (broken S24_3LE capture)
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoshmem: fix nlink for rename overwrite directory
Miklos Szeredi [Wed, 24 Sep 2014 15:56:17 +0000]
shmem: fix nlink for rename overwrite directory

commit b928095b0a7cff7fb9fcf4c706348ceb8ab2c295 upstream.

If overwriting an empty directory with rename, then need to drop the extra
nlink.

Test prog:

#include <stdio.h>
#include <fcntl.h>
#include <err.h>
#include <sys/stat.h>

int main(void)
{
const char *test_dir1 = "test-dir1";
const char *test_dir2 = "test-dir2";
int res;
int fd;
struct stat statbuf;

res = mkdir(test_dir1, 0777);
if (res == -1)
err(1, "mkdir(\"%s\")", test_dir1);

res = mkdir(test_dir2, 0777);
if (res == -1)
err(1, "mkdir(\"%s\")", test_dir2);

fd = open(test_dir2, O_RDONLY);
if (fd == -1)
err(1, "open(\"%s\")", test_dir2);

res = rename(test_dir1, test_dir2);
if (res == -1)
err(1, "rename(\"%s\", \"%s\")", test_dir1, test_dir2);

res = fstat(fd, &statbuf);
if (res == -1)
err(1, "fstat(%i)", fd);

if (statbuf.st_nlink != 0) {
fprintf(stderr, "nlink is %lu, should be 0\n", statbuf.st_nlink);
return 1;
}

return 0;
}

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agox86 early_ioremap: Increase FIX_BTMAPS_SLOTS to 8
Dave Young [Tue, 26 Aug 2014 09:06:41 +0000]
x86 early_ioremap: Increase FIX_BTMAPS_SLOTS to 8

commit 3eddc69ffeba092d288c386646bfa5ec0fce25fd upstream.

3.16 kernel boot fail with earlyprintk=efi, it keeps scrolling at the
bottom line of screen.

Bisected, the first bad commit is below:
commit 86dfc6f339886559d80ee0d4bd20fe5ee90450f0
Author: Lv Zheng <lv.zheng@intel.com>
Date:   Fri Apr 4 12:38:57 2014 +0800

    ACPICA: Tables: Fix table checksums verification before installation.

I did some debugging by enabling both serial and efi earlyprintk, below is
some debug dmesg, seems early_ioremap fails in scroll up function due to
no free slot, see below dmesg output:

  WARNING: CPU: 0 PID: 0 at mm/early_ioremap.c:116 __early_ioremap+0x90/0x1c4()
  __early_ioremap(ed00c800, 00000c80) not found slot
  Modules linked in:
  CPU: 0 PID: 0 Comm: swapper Not tainted 3.17.0-rc1+ #204
  Hardware name: Hewlett-Packard HP Z420 Workstation/1589, BIOS J61 v03.15 05/09/2013
  Call Trace:
    dump_stack+0x4e/0x7a
    warn_slowpath_common+0x75/0x8e
    ? __early_ioremap+0x90/0x1c4
    warn_slowpath_fmt+0x47/0x49
    __early_ioremap+0x90/0x1c4
    ? sprintf+0x46/0x48
    early_ioremap+0x13/0x15
    early_efi_map+0x24/0x26
    early_efi_scroll_up+0x6d/0xc0
    early_efi_write+0x1b0/0x214
    call_console_drivers.constprop.21+0x73/0x7e
    console_unlock+0x151/0x3b2
    ? vprintk_emit+0x49f/0x532
    vprintk_emit+0x521/0x532
    ? console_unlock+0x383/0x3b2
    printk+0x4f/0x51
    acpi_os_vprintf+0x2b/0x2d
    acpi_os_printf+0x43/0x45
    acpi_info+0x5c/0x63
    ? __acpi_map_table+0x13/0x18
    ? acpi_os_map_iomem+0x21/0x147
    acpi_tb_print_table_header+0x177/0x186
    acpi_tb_install_table_with_override+0x4b/0x62
    acpi_tb_install_standard_table+0xd9/0x215
    ? early_ioremap+0x13/0x15
    ? __acpi_map_table+0x13/0x18
    acpi_tb_parse_root_table+0x16e/0x1b4
    acpi_initialize_tables+0x57/0x59
    acpi_table_init+0x50/0xce
    acpi_boot_table_init+0x1e/0x85
    setup_arch+0x9b7/0xcc4
    start_kernel+0x94/0x42d
    ? early_idt_handlers+0x120/0x120
    x86_64_start_reservations+0x2a/0x2c
    x86_64_start_kernel+0xf3/0x100

Quote reply from Lv.zheng about the early ioremap slot usage in this case:

"""
In early_efi_scroll_up(), 2 mapping entries will be used for the src/dst screen buffer.
In drivers/acpi/acpica/tbutils.c, we've improved the early table loading code in acpi_tb_parse_root_table().
We now need 2 mapping entries:
1. One mapping entry is used for RSDT table mapping. Each RSDT entry contains an address for another ACPI table.
2. For each entry in RSDP, we need another mapping entry to map the table to perform necessary check/override before installing it.

When acpi_tb_parse_root_table() prints something through EFI earlyprintk console, we'll have 4 mapping entries used.
The current 4 slots setting of early_ioremap() seems to be too small for such a use case.
"""

Thus increase the slot to 8 in this patch to fix this issue.
boot-time mappings become 512 page with this patch.

Signed-off-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoKVM: x86: handle idiv overflow at kvm_write_tsc
Marcelo Tosatti [Wed, 12 Jun 2013 02:31:12 +0000]
KVM: x86: handle idiv overflow at kvm_write_tsc

commit 8915aa27d5efbb9185357175b0acf884325565f9 upstream.

Its possible that idivl overflows (due to large delta stored in usdiff,
valid scenario).

Create an exception handler to catch the overflow exception (division by zero
is protected by vcpu->arch.virtual_tsc_khz check), and interpret it accordingly
(delta is larger than USEC_PER_SEC).

Fixes https://bugzilla.redhat.com/show_bug.cgi?id=969644

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Philipp Hahn <hahn@univention.de>
Tested-by: Philipp Hahn <hahn@univention.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoregmap: Fix handling of volatile registers for format_write() chips
Mark Brown [Tue, 26 Aug 2014 11:12:17 +0000]
regmap: Fix handling of volatile registers for format_write() chips

commit 5844a8b9d98ec11ce1d77610daacf3f0a0e14715 upstream.

A previous over-zealous factorisation of code means that we only treat
registers as volatile if they are readable. For most devices this is fine
since normally most registers can be read and volatility implies
readability but for format_write() devices where there is no readback from
the hardware and we use volatility to mean simply uncacheability this means
that we end up treating all registers as cacheble.

A bigger refactoring of the code to clarify this is in order but as a fix
make a minimal change and only check readability when checking volatility
if there is no format_write() operation defined for the device.

Signed-off-by: Mark Brown <broonie@linaro.org>
Tested-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoACPICA: Update to GPIO region handler interface.
Bob Moore [Tue, 23 Sep 2014 02:35:47 +0000]
ACPICA: Update to GPIO region handler interface.

commit 75ec6e55f1384548311a13ce4fcb39c516053314 upstream.

Changes to correct several GPIO issues:

1) The update_rule in a GPIO field definition is now ignored;
a read-modify-write operation is never performed for GPIO fields.
(Internally, this means that the field assembly/disassembly
code is completely bypassed for GPIO.)

2) The Address parameter passed to a GPIO region handler is
now the bit offset of the field from a previous Connection()
operator. Thus, it becomes a "Pin Number Index" into the
Connection() resource descriptor.

3) The bit_width parameter passed to a GPIO region handler is
now the exact bit width of the GPIO field. Thus, it can be
interpreted as "number of pins".

Overall, we can now say that the region handler interface
to GPIO handlers is a raw "bit/pin" addressed interface, not
a byte-addressed interface like the system_memory handler interface.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoMIPS: mcount: Adjust stack pointer for static trace in MIPS32
Markos Chandras [Tue, 16 Sep 2014 14:55:12 +0000]
MIPS: mcount: Adjust stack pointer for static trace in MIPS32

commit 8a574cfa2652545eb95595d38ac2a0bb501af0ae upstream.

Every mcount() call in the MIPS 32-bit kernel is done as follows:

[...]
move at, ra
jal _mcount
addiu sp, sp, -8
[...]

but upon returning from the mcount() function, the stack pointer
is not adjusted properly. This is explained in details in 58b69401c797
(MIPS: Function tracer: Fix broken function tracing).

Commit ad8c396936e3 ("MIPS: Unbreak function tracer for 64-bit kernel.)
fixed the stack manipulation for 64-bit but it didn't fix it completely
for MIPS32.

Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/7792/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoMIPS: ZBOOT: add missing <linux/string.h> include
Aurelien Jarno [Sun, 20 Jul 2014 17:58:23 +0000]
MIPS: ZBOOT: add missing <linux/string.h> include

commit 29593fd5a8149462ed6fad0d522234facdaee6c8 upstream.

Commit dc4d7b37 (MIPS: ZBOOT: gather string functions into string.c)
moved the string related functions into a separate file, which might
cause the following build error, depending on the configuration:

| CC      arch/mips/boot/compressed/decompress.o
| In file included from linux/arch/mips/boot/compressed/../../../../lib/decompress_unxz.c:234:0,
|                  from linux/arch/mips/boot/compressed/decompress.c:67:
| linux/arch/mips/boot/compressed/../../../../lib/xz/xz_dec_stream.c: In function 'fill_temp':
| linux/arch/mips/boot/compressed/../../../../lib/xz/xz_dec_stream.c:162:2: error: implicit declaration of function 'memcpy' [-Werror=implicit-function-declaration]
| cc1: some warnings being treated as errors
| linux/scripts/Makefile.build:308: recipe for target 'arch/mips/boot/compressed/decompress.o' failed
| make[6]: *** [arch/mips/boot/compressed/decompress.o] Error 1
| linux/arch/mips/Makefile:308: recipe for target 'vmlinuz' failed

It does not fail with the standard configuration, as when
CONFIG_DYNAMIC_DEBUG is not enabled <linux/string.h> gets included in
include/linux/dynamic_debug.h. There might be other ways for it to
get indirectly included.

We can't add the include directly in xz_dec_stream.c as some
architectures might want to use a different version for the boot/
directory (see for example arch/x86/boot/string.h).

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/7420/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoARM: 8165/1: alignment: don't break misaligned NEON load/store
Robin Murphy [Thu, 25 Sep 2014 10:56:19 +0000]
ARM: 8165/1: alignment: don't break misaligned NEON load/store

commit 5ca918e5e3f9df4634077c06585c42bc6a8d699a upstream.

The alignment fixup incorrectly decodes faulting ARM VLDn/VSTn
instructions (where the optional alignment hint is given but incorrect)
as LDR/STR, leading to register corruption. Detect these and correctly
treat them as unhandled, so that userspace gets the fault it expects.

Reported-by: Simon Hosie <simon.hosie@arm.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoARM: 7897/1: kexec: Use the right ISA for relocate_new_kernel
Dave Martin [Mon, 25 Nov 2013 13:54:47 +0000]
ARM: 7897/1: kexec: Use the right ISA for relocate_new_kernel

commit e2ccba49085ab5d71b092de2a5176eb9b19cc876 upstream.

Copying a function with memcpy() and then trying to execute the
result isn't trivially portable to Thumb.

This patch modifies the kexec soft restart code to copy its
assembler trampoline relocate_new_kernel() using fncpy() instead,
so that relocate_new_kernel can be in the same ISA as the rest of
the kernel without problems.

Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Reported-by: Taras Kondratiuk <taras.kondratiuk@linaro.org>
Tested-by: Taras Kondratiuk <taras.kondratiuk@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Integrated-by: Liu Hua <sdu.liu@huawei.com>
Signed-off-by: Liu Hua <sdu.liu@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoARM: 8133/1: use irq_set_affinity with force=false when migrating irqs
Sudeep Holla [Mon, 1 Sep 2014 16:14:29 +0000]
ARM: 8133/1: use irq_set_affinity with force=false when migrating irqs

commit a040803a9d6b8c1876d3487a5cb69602ebcbb82c upstream.

Since commit 1dbfa187dad ("ARM: irq migration: force migration off CPU
going down") the ARM interrupt migration code on cpu offline calls
irqchip.irq_set_affinity() with the argument force=true. At the point
of this change the argument had no effect because it was not used by
any interrupt chip driver and there was no semantics defined.

This changed with commit 01f8fa4f01d8 ("genirq: Allow forcing cpu
affinity of interrupts") which made the force argument useful to route
interrupts to not yet online cpus without checking the target cpu
against the cpu online mask. The following commit ffde1de64012
("irqchip: gic: Support forced affinity setting") implemented this for
the GIC interrupt controller.

As a consequence the ARM cpu offline irq migration fails if CPU0 is
offlined, because CPU0 is still set in the affinity mask and the
validataion against cpu online mask is skipped to the force argument
being true. The following first_cpu(mask) selection always selects
CPU0 as the target.

Solve the issue by calling irq_set_affinity() with force=false from
the CPU offline irq migration code so the GIC driver validates the
affinity mask against CPU online mask and therefore removes CPU0 from
the possible target candidates.

Tested on TC2 hotpluging CPU0 in and out. Without this patch the system
locks up as the IRQs are not migrated away from CPU0.

Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoARM: 8128/1: abort: don't clear the exclusive monitors
Mark Rutland [Fri, 15 Aug 2014 11:11:49 +0000]
ARM: 8128/1: abort: don't clear the exclusive monitors

commit 85868313177700d20644263a782351262d2aff84 upstream.

The ARMv6 and ARMv7 early abort handlers clear the exclusive monitors
upon entry to the kernel, but this is redundant:

  - We clear the monitors on every exception return since commit
    200b812d0084 ("Clear the exclusive monitor when returning from an
    exception"), so this is not necessary to ensure the monitors are
    cleared before returning from a fault handler.

  - Any dummy STREX will target a temporary scratch area in memory, and
    may succeed or fail without corrupting useful data. Its status value
    will not be used.

  - Any other STREX in the kernel must be preceded by an LDREX, which
    will initialise the monitors consistently and will not depend on the
    earlier state of the monitors.

Therefore we have no reason to care about the initial state of the
exclusive monitors when a data abort is taken, and clearing the monitors
prior to exception return (as we already do) is sufficient.

This patch removes the redundant clearing of the exclusive monitors from
the early abort handlers.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoNFSv4: Fix another bug in the close/open_downgrade code
Trond Myklebust [Thu, 18 Sep 2014 15:51:32 +0000]
NFSv4: Fix another bug in the close/open_downgrade code

commit cd9288ffaea4359d5cfe2b8d264911506aed26a4 upstream.

James Drew reports another bug whereby the NFS client is now sending
an OPEN_DOWNGRADE in a situation where it should really have sent a
CLOSE: the client is opening the file for O_RDWR, but then trying to
do a downgrade to O_RDONLY, which is not allowed by the NFSv4 spec.

Reported-by: James Drews <drews@engr.wisc.edu>
Link: http://lkml.kernel.org/r/541AD7E5.8020409@engr.wisc.edu
Fixes: aee7af356e15 (NFSv4: Fix problems with close in the presence...)
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoNFSv4: nfs4_state_manager() vs. nfs_server_remove_lists()
Steve Dickson [Thu, 18 Sep 2014 13:13:17 +0000]
NFSv4: nfs4_state_manager() vs. nfs_server_remove_lists()

commit 080af20cc945d110f9912d01cf6b66f94a375b8d upstream.

There is a race between nfs4_state_manager() and
nfs_server_remove_lists() that happens during a nfsv3 mount.

The v3 mount notices there is already a supper block so
nfs_server_remove_lists() called which uses the nfs_client_lock
spin lock to synchronize access to the client list.

At the same time nfs4_state_manager() is running through
the client list looking for work to do, using the same
lock. When nfs4_state_manager() wins the race to the
list, a v3 client pointer is found and not ignored
properly which causes the panic.

Moving some protocol checks before the state checking
avoids the panic.

Signed-off-by: Steve Dickson <steved@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agousb:hub set hub->change_bits when over-current happens
Shen Guang [Wed, 8 Jan 2014 06:45:42 +0000]
usb:hub set hub->change_bits when over-current happens

commit 08d1dec6f4054e3613f32051d9b149d4203ce0d2 upstream.

When we are doing compliance test with xHCI, we found that if we
enable CONFIG_USB_SUSPEND and plug in a bad device which causes
over-current condition to the root port, software will not be noticed.
The reason is that current code don't set hub->change_bits in
hub_activate() when over-current happens, and then hub_events() will
not check the port status because it thinks nothing changed.
If CONFIG_USB_SUSPEND is disabled, the interrupt pipe of the hub will
report the change and set hub->event_bits, and then hub_events() will
check what events happened.In this case over-current can be detected.

Signed-off-by: Shen Guang <shenguang10@gmail.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: Frans Klaver <fransklaver@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agousb: dwc3: omap: fix ordering for runtime pm calls
Felipe Balbi [Wed, 3 Sep 2014 21:42:57 +0000]
usb: dwc3: omap: fix ordering for runtime pm calls

commit 81a60b7f5c143ab3cdcd9943c9b4b7c63c32fc31 upstream.

we don't to gate clocks until our children are
done with their remove path.

Fixes: af310e9 (usb: dwc3: omap: use runtime API's to enable clocks)
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoUSB: EHCI: unlink QHs even after the controller has stopped
Alan Stern [Wed, 17 Sep 2014 15:23:54 +0000]
USB: EHCI: unlink QHs even after the controller has stopped

commit 7312b5ddd47fee2356baa78c5516ef8e04eed452 upstream.

Old code in ehci-hcd tries to expedite disabling endpoints after the
controller has stopped, by destroying the endpoint's associated QH
without first unlinking the QH.  This was necessary back when the
driver wasn't so careful about keeping track of the controller's
state.

But now we are careful about it, and the driver knows that when the
controller isn't running, no unlinking delay is needed.  Furthermore,
skipping the unlink step will trigger a BUG() in qh_destroy() when the
preceding QH is released, because the link pointer will be non-NULL.

Removing the lines that skip the unlinking step and go directly to
QH_STATE_IDLE fixes the problem.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Joe Lawrence <joe.lawrence@stratus.com>
Tested-by: Joe Lawrence <joe.lawrence@stratus.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoUSB: storage: Add quirks for Entrega/Xircom USB to SCSI converters
Mark [Wed, 17 Sep 2014 18:15:43 +0000]
USB: storage: Add quirks for Entrega/Xircom USB to SCSI converters

commit c80b4495c61636edc58fe1ce300f09f24db28e10 upstream.

This patch adds quirks for Entrega Technologies (later Xircom PortGear) USB-
SCSI converters. They use Shuttle Technology EUSB-01/EUSB-S1 chips. The
US_FL_SCM_MULT_TARG quirk is needed to allow multiple devices on the SCSI
chain to be accessed. Without it only the (single) device with SCSI ID 0
can be used.

The standalone converter sold by Entrega had model number U1-SC25. Xircom
acquired Entrega and re-branded the product line PortGear. The PortGear USB
to SCSI Converter (model PGSCSI) is internally identical to the Entrega
product, but later models may use a different USB ID. The Entrega-branded
units have USB ID 1645:0007, as does my Xircom PGSCSI, but the Windows and
Macintosh drivers also support 085A:0028.

Entrega also sold the "Mac USB Dock", which provides two USB ports, a Mac
(8-pin mini-DIN) serial port and a SCSI port. It appears to the computer as
a four-port hub, USB-serial, and USB-SCSI converters. The USB-SCSI part may
have initially used the same ID as the standalone U1-SC25 (1645:0007), but
later production used 085A:0026.

My Xircom PortGear PGSCSI has bcdDevice=0x0100. Units with bcdDevice=0x0133
probably also exist.

This patch adds quirks for 1645:0007, 085A:0026 and 085A:0028. The Windows
driver INF file also mentions 085A:0032 "PortStation SCSI Module", but I
couldn't find any mention of that actually existing in the wild; perhaps it
was cancelled before release?

Signed-off-by: Mark Knibbs <markk@clara.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoUSB: storage: Add quirk for Ariston Technologies iConnect USB to SCSI adapter
Mark [Tue, 16 Sep 2014 15:51:41 +0000]
USB: storage: Add quirk for Ariston Technologies iConnect USB to SCSI adapter

commit b6a3ed677991558ce09046397a7c4d70530d15b3 upstream.

Hi,

The Ariston Technologies iConnect 025 and iConnect 050 (also known as e.g.
iSCSI-50) are SCSI-USB converters which use Shuttle Technology/SCM
Microsystems chips. Only the connectors differ; both have the same USB ID.
The US_FL_SCM_MULT_TARG quirk is required to use SCSI devices with ID other
than 0.

I don't have one of these, but based on the other entries for Shuttle/
SCM-based converters this patch is very likely correct. I used 0x0000 and
0x9999 for bcdDeviceMin and bcdDeviceMax because I'm not sure which
bcdDevice value the products use.

Signed-off-by: Mark Knibbs <markk@clara.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoUSB: storage: Add quirk for Adaptec USBConnect 2000 USB-to-SCSI Adapter
Mark [Tue, 16 Sep 2014 15:22:50 +0000]
USB: storage: Add quirk for Adaptec USBConnect 2000 USB-to-SCSI Adapter

commit 67d365a57a51fb9dece6a5ceb504aa381cae1e5b upstream.

The Adaptec USBConnect 2000 is another SCSI-USB converter which uses
Shuttle Technology/SCM Microsystems chips. The US_FL_SCM_MULT_TARG quirk is
required to use SCSI devices with ID other than 0.

I don't have a USBConnect 2000, but based on the other entries for Shuttle/
SCM-based converters this patch is very likely correct. I used 0x0000 and
0x9999 for bcdDeviceMin and bcdDeviceMax because I'm not sure which
bcdDevice value the product uses.

Signed-off-by: Mark Knibbs <markk@clara.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agostorage: Add single-LUN quirk for Jaz USB Adapter
Mark [Thu, 11 Sep 2014 12:15:45 +0000]
storage: Add single-LUN quirk for Jaz USB Adapter

commit c66f1c62e85927357e7b3f4c701614dcb5c498a2 upstream.

The Iomega Jaz USB Adapter is a SCSI-USB converter cable. The hardware
seems to be identical to e.g. the Microtech XpressSCSI, using a Shuttle/
SCM chip set. However its firmware restricts it to only work with Jaz
drives.

On connecting the cable a message like this appears four times in the log:
 reset full speed USB device number 4 using uhci_hcd

That's non-fatal but the US_FL_SINGLE_LUN quirk fixes it.

Signed-off-by: Mark Knibbs <markk@clara.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agousb: hub: take hub->hdev reference when processing from eventlist
Joe Lawrence [Wed, 10 Sep 2014 19:07:50 +0000]
usb: hub: take hub->hdev reference when processing from eventlist

commit c605f3cdff53a743f6d875b76956b239deca1272 upstream.

During surprise device hotplug removal tests, it was observed that
hub_events may try to call usb_lock_device on a device that has already
been freed. Protect the usb_device by taking out a reference (under the
hub_event_lock) when hub_events pulls it off the list, returning the
reference after hub_events is finished using it.

Signed-off-by: Joe Lawrence <joe.lawrence@stratus.com>
Suggested-by: David Bulkow <david.bulkow@stratus.com> for using kref
Suggested-by: Alan Stern <stern@rowland.harvard.edu> for placement
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoxhci: fix oops when xhci resumes from hibernate with hw lpm capable devices
Mathias Nyman [Thu, 11 Sep 2014 10:55:50 +0000]
xhci: fix oops when xhci resumes from hibernate with hw lpm capable devices

commit 96044694b8511bc2b04df0776b4ba295cfe005c0 upstream.

Resuming from hibernate (S4) will restart and re-initialize xHC.
The device contexts are freed and will be re-allocated later during device reset.

Usb core will disable link pm in device resume before device reset, which will
try to change the max exit latency, accessing the device contexts before they are re-allocated.

There is no need to zero (disable) the max exit latency when disabling hw lpm
for a freshly re-initialized xHC. So check that device context exists before
doing anything. The max exit latency will be set again after device reset when usb core
enables the link pm.

Reported-by: Imre Deak <imre.deak@intel.com>
Tested-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoxhci: Fix null pointer dereference if xhci initialization fails
Mathias Nyman [Thu, 11 Sep 2014 10:55:48 +0000]
xhci: Fix null pointer dereference if xhci initialization fails

commit c207e7c50f31113c24a9f536fcab1e8a256985d7 upstream.

If xhci initialization fails before the roothub bandwidth
domains (xhci->rh_bw[i]) are allocated it will oops when
trying to access rh_bw members in xhci_mem_cleanup().

Reported-by: Manuel Reimer <manuel.reimer@gmx.de>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoUSB: zte_ev: fix removed PIDs
Johan Hovold [Thu, 28 Aug 2014 10:46:54 +0000]
USB: zte_ev: fix removed PIDs

commit 3096691011d01cef56b243a5e65431405c07d574 upstream.

Add back some PIDs that were mistakingly remove when reverting commit
73228a0538a7 ("USB: option,zte_ev: move most ZTE CDMA devices to
zte_ev"), which apparently did more than its commit message claimed in
that it not only moved some PIDs from option to zte_ev but also added
some new ones.

Fixes: 63a901c06e3c ("Revert "USB: option,zte_ev: move most ZTE CDMA
devices to zte_ev"")

Reported-by: Lei Liu <lei35151@163.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoUSB: ftdi_sio: add support for NOVITUS Bono E thermal printer
Johan Hovold [Mon, 18 Aug 2014 16:33:11 +0000]
USB: ftdi_sio: add support for NOVITUS Bono E thermal printer

commit ee444609dbae8afee420c3243ce4c5f442efb622 upstream.

Add device id for NOVITUS Bono E thermal printer.

Reported-by: Emanuel Koczwara <poczta@emanuelkoczwara.pl>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoUSB: sierra: add 1199:68AA device ID
Bjørn Mork [Thu, 28 Aug 2014 13:08:16 +0000]
USB: sierra: add 1199:68AA device ID

commit 5b3da69285c143b7ea76b3b9f73099ff1093ab73 upstream.

This VID:PID is used for some Direct IP devices behaving
identical to the already supported 0F3D:68AA devices.

Reported-by: Lars Melin <larsm17@gmail.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoUSB: sierra: avoid CDC class functions on "68A3" devices
Bjørn Mork [Thu, 28 Aug 2014 12:11:23 +0000]
USB: sierra: avoid CDC class functions on "68A3" devices

commit 049255f51644c1105775af228396d187402a5934 upstream.

Sierra Wireless Direct IP devices using the 68A3 product ID
can be configured for modes including a CDC ECM class function.
The known example uses interface numbers 12 and 13 for the ECM
control and data interfaces respectively, consistent with CDC
MBIM function interface numbering on other Sierra devices.

It seems cleaner to restrict this driver to the ff/ff/ff
vendor specific interfaces rather than increasing the already
long interface number blacklist.  This should be more future
proof if Sierra adds more class functions using interface
numbers not yet in the blacklist.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoUSB: zte_ev: remove duplicate Qualcom PID
Johan Hovold [Thu, 7 Aug 2014 14:00:15 +0000]
USB: zte_ev: remove duplicate Qualcom PID

commit 754eb21c0bbbbc4b8830a9a864b286323b84225f upstream.

Remove dublicate Qualcom PID 0x3197 which is already handled by the
moto-modem driver since commit 6986a978eec7 ("USB: add new moto_modem
driver for some Morotola phones").

Fixes: 799ee9243d89 ("USB: serial: add zte_ev.c driver")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoUSB: zte_ev: remove duplicate Gobi PID
Johan Hovold [Thu, 7 Aug 2014 14:00:14 +0000]
USB: zte_ev: remove duplicate Gobi PID

commit 95be5739588c56a9327e477aa0ba3c81c5cf8631 upstream.

Remove dublicate Gobi PID 0x9008 which is already handled by the
qcserial driver since commit f05932c0caf4 ("USB: qcserial: Add extra
device IDs").

Fixes: 799ee9243d89 ("USB: serial: add zte_ev.c driver")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoRevert "USB: option,zte_ev: move most ZTE CDMA devices to zte_ev"
Johan Hovold [Thu, 7 Aug 2014 14:00:13 +0000]
Revert "USB: option,zte_ev: move most ZTE CDMA devices to zte_ev"

commit 63a901c06e3c2c45bd601916fe04e870e9ccae1e upstream.

This reverts commit 73228a0538a7 ("USB: option,zte_ev: move most ZTE
CDMA devices to zte_ev").

Move the IDs of the devices that were previously driven by the option
driver back to that driver.

As several users have reported, the zte_ev driver is causing random
disconnects as well as reconnect failures.

A closer analysis of the zte_ev setup code reveals that it consists of
standard CDC requests (SET/GET_LINE_CODING and SET_CONTROL_LINE_STATE)
but unfortunately fails to get some of those right. In particular, as
reported by Liu Lei, it fails to lower DTR/RTS on close. It also appears
that the control requests lack the interface argument.

Note that the zte_ev driver is based on code (once) distributed by ZTE
that still appears to originally have been reverse-engineered and bolted
onto the generic driver.

Since line control is already handled properly by the option driver, and
the SET/GET_LINE_CODING requests appears to be redundant (amounts to a
SET 9600 8N1), this is a first step in ultimately removing the redundant
zte_ev driver.

Note that AC2726 had already been moved back to option, and that some
IDs were in the device table of both drivers prior to the commit being
reverted.

Reported-by: Lei Liu <liu.lei78@zte.com.cn>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoUSB: option: add VIA Telecom CDS7 chipset device id
Brennan Ashton [Wed, 6 Aug 2014 15:46:44 +0000]
USB: option: add VIA Telecom CDS7 chipset device id

commit d77302739d900bbca5e901a3b7ac48c907ee6c93 upstream.

This VIA Telecom baseband processor is used is used by by u-blox in both the
FW2770 and FW2760 products and may be used in others as well.

This patch has been tested on both of these modem versions.

Signed-off-by: Brennan Ashton <bashton@brennanashton.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoUSB: option: reduce interrupt-urb logging verbosity
Johan Hovold [Tue, 29 Jul 2014 12:14:55 +0000]
USB: option: reduce interrupt-urb logging verbosity

commit f0e4cba2534cd88476dff920727c81350130f3c5 upstream.

Do not log normal interrupt-urb shutdowns as errors.

The option driver has always been logging any nonzero interrupt-urb
status as an error, including when the urb is killed during normal
operation.

Commit 9096f1fbba91 ("USB: usb_wwan: fix potential NULL-deref at
resume") moved the interrupt urb submission from port probe and release
to open and close, thus potentially increasing the number of these
false-positive error messages dramatically.

Reported-by: Ed Butler <ressy66@ausics.net>
Tested-by: Ed Butler <ressy66@ausics.net>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoUSB: serial: fix potential heap buffer overflow
Johan Hovold [Wed, 27 Aug 2014 09:55:19 +0000]
USB: serial: fix potential heap buffer overflow

commit 5654699fb38512bdbfc0f892ce54fce75bdc2bab upstream.

Make sure to verify the number of ports requested by subdriver to avoid
writing beyond the end of fixed-size array in interface data.

The current usb-serial implementation is limited to eight ports per
interface but failed to verify that the number of ports requested by a
subdriver (which could have been determined from device descriptors) did
not exceed this limit.

Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoUSB: sisusb: add device id for Magic Control USB video
Stephen Hemminger [Tue, 26 Aug 2014 04:07:47 +0000]
USB: sisusb: add device id for Magic Control USB video

commit 5b6b80aeb21091ed3030b9b6aae597d81326f1aa upstream.

I have a j5 create (JUA210) USB 2 video device and adding it device id
to SIS USB video gets it to work.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoUSB: serial: fix potential stack buffer overflow
Johan Hovold [Wed, 27 Aug 2014 09:55:18 +0000]
USB: serial: fix potential stack buffer overflow

commit d979e9f9ecab04c1ecca741370e30a8a498893f5 upstream.

Make sure to verify the maximum number of endpoints per type to avoid
writing beyond the end of a stack-allocated array.

The current usb-serial implementation is limited to eight ports per
interface but failed to verify that the number of endpoints of a certain
type reported by a device did not exceed this limit.

Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoUSB: serial: pl2303: add device id for ztek device
Greg KH [Fri, 15 Aug 2014 07:22:21 +0000]
USB: serial: pl2303: add device id for ztek device

commit 91fcb1ce420e0a5f8d92d556d7008a78bc6ce1eb upstream.

This adds a new device id to the pl2303 driver for the ZTEK device.

Reported-by: Mike Chu <Mike-Chu@prolific.com.tw>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>

4 years agoxtensa: fix a6 and a7 handling in fast_syscall_xtensa
Max Filippov [Thu, 31 Jul 2014 18:40:57 +0000]
xtensa: fix a6 and a7 handling in fast_syscall_xtensa

commit d1b6ba82a50cecf94be540a3a153aa89d97511a0 upstream.

Remove restoring a6 on some return paths and instead modify and restore
it in a single place, using symbolic name.
Correctly restore a7 from PT_AREG7 in case of illegal a6 value.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoxtensa: fix TLBTEMP_BASE_2 region handling in fast_second_level_miss
Max Filippov [Mon, 21 Jul 2014 18:01:51 +0000]
xtensa: fix TLBTEMP_BASE_2 region handling in fast_second_level_miss

commit 7128039fe2dd3d59da9e4ffa036f3aaa3ba87b9f upstream.

Current definition of TLBTEMP_BASE_2 is always 32K above the
TLBTEMP_BASE_1, whereas fast_second_level_miss handler for the TLBTEMP
region analyzes virtual address bit (PAGE_SHIFT + DCACHE_ALIAS_ORDER)
to determine TLBTEMP region where the fault happened. The size of the
TLBTEMP region is also checked incorrectly: not 64K, but twice data
cache way size (whicht may as well be less than the instruction cache
way size).

Fix TLBTEMP_BASE_2 to be TLBTEMP_BASE_1 + data cache way size.
Provide TLBTEMP_SIZE that is a greater of doubled data cache way size or
the instruction cache way size, and use it to determine if the second
level TLB miss occured in the TLBTEMP region.

Practical occurence of page faults in the TLBTEMP area is extremely
rare, this code can be tested by deletion of all w[di]tlb instructions
in the tlbtemp_mapping region.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoxtensa: fix access to THREAD_RA/THREAD_SP/THREAD_DS
Max Filippov [Sun, 27 Jul 2014 03:23:41 +0000]
xtensa: fix access to THREAD_RA/THREAD_SP/THREAD_DS

commit 52247123749cc3cbc30168b33ad8c69515c96d23 upstream.

With SMP and a lot of debug options enabled task_struct::thread gets out
of reach of s32i/l32i instructions with base pointing at task_struct,
breaking build with the following messages:

  arch/xtensa/kernel/entry.S: Assembler messages:
  arch/xtensa/kernel/entry.S:1002: Error: operand 3 of 'l32i.n' has invalid value '1048'
  arch/xtensa/kernel/entry.S:1831: Error: operand 3 of 's32i.n' has invalid value '1040'
  arch/xtensa/kernel/entry.S:1832: Error: operand 3 of 's32i.n' has invalid value '1044'

Change base to point to task_struct::thread in such cases.
Don't use a10 in _switch_to to save/restore prev pointer as a2 is not
clobbered.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoxtensa: fix address checks in dma_{alloc,free}_coherent
Alan Douglas [Wed, 23 Jul 2014 10:06:40 +0000]
xtensa: fix address checks in dma_{alloc,free}_coherent

commit 1ca49463c44c970b1ab1d71b0f268bfdf8427a7e upstream.

Virtual address is translated to the XCHAL_KSEG_CACHED region in the
dma_free_coherent, but is checked to be in the 0...XCHAL_KSEG_SIZE
range.

Change check for end of the range from 'addr >= X' to 'addr > X - 1' to
handle the case of X == 0.

Replace 'if (C) BUG();' construct with 'BUG_ON(C);'.

Signed-off-by: Alan Douglas <adouglas@cadence.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoxtensa: replace IOCTL code definitions with constants
Max Filippov [Sat, 19 Jul 2014 23:38:53 +0000]
xtensa: replace IOCTL code definitions with constants

commit f61bf8e7d19e0a3456a7a9ed97c399e4353698dc upstream.

This fixes userspace code that builds on other architectures but fails
on xtensa due to references to structures that other architectures don't
refer to. E.g. this fixes the following issue with python-2.7.8:

  python-2.7.8/Modules/termios.c:861:25: error: invalid application
     of 'sizeof' to incomplete type 'struct serial_multiport_struct'
     {"TIOCSERGETMULTI", TIOCSERGETMULTI},
  python-2.7.8/Modules/termios.c:870:25: error: invalid application
     of 'sizeof' to incomplete type 'struct serial_multiport_struct'
     {"TIOCSERSETMULTI", TIOCSERSETMULTI},
  python-2.7.8/Modules/termios.c:900:24: error: invalid application
     of 'sizeof' to incomplete type 'struct tty_struct'
     {"TIOCTTYGSTRUCT", TIOCTTYGSTRUCT},

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agodrm/radeon: add connector quirk for fujitsu board
Alex Deucher [Mon, 8 Sep 2014 17:55:51 +0000]
drm/radeon: add connector quirk for fujitsu board

commit 1952f24d0fa6292d65f886887af87ba8ac79b3ba upstream.

Vbios connector table lists non-existent VGA port.

Bug:
https://bugs.freedesktop.org/show_bug.cgi?id=83184

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agodrm/vmwgfx: Fix a potential infinite spin waiting for fifo idle
Thomas Hellstrom [Thu, 28 Aug 2014 09:53:23 +0000]
drm/vmwgfx: Fix a potential infinite spin waiting for fifo idle

commit f01ea0c3d9db536c64d47922716d8b3b8f21d850 upstream.

The code waiting for fifo idle was incorrect and could possibly spin
forever under certain circumstances.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reported-by: Mark Sheldon <markshel@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Reivewed-by: Mark Sheldon <markshel@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agodrm/ast: AST2000 cannot be detected correctly
Y.C. Chen [Wed, 10 Sep 2014 04:07:54 +0000]
drm/ast: AST2000 cannot be detected correctly

commit 83502a5d34386f7c6973bc70e1c423f55f5a2e3a upstream.

Type error and cause AST2000 cannot be detected correctly

Signed-off-by: Y.C. Chen <yc_chen@aspeedtech.com>
Reviewed-by: Egbert Eich <eich@suse.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agodrm/i915: Wait for vblank before enabling the TV encoder
Ville Syrjälä [Mon, 8 Sep 2014 14:43:01 +0000]
drm/i915: Wait for vblank before enabling the TV encoder

commit 7a98948f3b536ca9a077e84966ddc0e9f53726df upstream.

The vblank waits in intel_tv_detect_type() are timing out for some
reason. This is a regression caused removing seemingly useless vblank
waits from the modeset seqeuence in:

 commit 56ef52cad5e37fca89638e4bad598a994ecc3d9f
 Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
 Date:   Thu May 8 19:23:15 2014 +0300

    drm/i915: Kill vblank waits after pipe enable on gmch platforms

So it turns out they weren't all entirely useless. Apparently the pipe
has to go through one full frame before we enable the TV port. Add a
vblank wait to intel_enable_tv() to make sure that happens.

Another approach was attempted by placing the vblank wait just after
enabling the port. The theory behind that attempt was that we need to
let the port stay enabled for one full frame before disabling it again
during load detection. But that didn't work, and we definitely must
have the vblank wait before enabling the port.

Cc: Alan Bartlett <ajb@elrepo.org>
Tested-by: Alan Bartlett <ajb@elrepo.org>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=79311
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agodrm/i915: Remove bogus __init annotation from DMI callbacks
Mathias Krause [Wed, 27 Aug 2014 16:41:19 +0000]
drm/i915: Remove bogus __init annotation from DMI callbacks

commit bbe1c2740d3a25aa1dbe5d842d2ff09cddcdde0a upstream.

The __init annotations for the DMI callback functions are wrong as this
code can be called even after the module has been initialized, e.g. like
this:

  # echo 1 > /sys/bus/pci/devices/0000:00:02.0/remove
  # modprobe i915
  # echo 1 > /sys/bus/pci/rescan

The first command will remove the PCI device from the kernel's device
list so the second command won't see it right away. But as it registers
a PCI driver it'll see it on the third command. If the system happens to
match one of the DMI table entries we'll try to call a function in long
released memory and generate an Oops, at best.

Fix this by removing the bogus annotation.

Modpost should have caught that one but it ignores section reference
mismatches from the .rodata section. :/

Fixes: 25e341cfc33d ("drm/i915: quirk away broken OpRegion VBT")
Fixes: 8ca4013d702d ("CHROMIUM: i915: Add DMI override to skip CRT...")
Fixes: 425d244c8670 ("drm/i915: ignore LVDS on intel graphics systems...")
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Duncan Laurie <dlaurie@chromium.org>
Cc: Jarod Wilson <jarod@redhat.com>
Cc: Rusty Russell <rusty@rustcorp.com.au> # Can modpost be fixed?
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoHID: logitech-dj: prevent false errors to be shown
Benjamin Tissoires [Fri, 22 Aug 2014 20:16:05 +0000]
HID: logitech-dj: prevent false errors to be shown

commit 5abfe85c1d4694d5d4bbd13ecc166262b937adf0 upstream.

Commit "HID: logitech: perform bounds checking on device_id early
enough" unfortunately leaks some errors to dmesg which are not real
ones:
- if the report is not a DJ one, then there is not point in checking
  the device_id
- the receiver (index 0) can also receive some notifications which
  can be safely ignored given the current implementation

Move out the test regarding the report_id and also discards
printing errors when the receiver got notified.

Fixes: ad3e14d7c5268c2e24477c6ef54bbdf88add5d36

Reported-and-tested-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoHID: magicmouse: sanity check report size in raw_event() callback
Jiri Kosina [Wed, 27 Aug 2014 07:12:24 +0000]
HID: magicmouse: sanity check report size in raw_event() callback

commit c54def7bd64d7c0b6993336abcffb8444795bf38 upstream.

The report passed to us from transport driver could potentially be
arbitrarily large, therefore we better sanity-check it so that
magicmouse_emit_touch() gets only valid values of raw_id.

Reported-by: Steven Vittitoe <scvitti@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoHID: picolcd: sanity check report size in raw_event() callback
Jiri Kosina [Wed, 27 Aug 2014 07:13:15 +0000]
HID: picolcd: sanity check report size in raw_event() callback

commit 844817e47eef14141cf59b8d5ac08dd11c0a9189 upstream.

The report passed to us from transport driver could potentially be
arbitrarily large, therefore we better sanity-check it so that raw_data
that we hold in picolcd_pending structure are always kept within proper
bounds.

Reported-by: Steven Vittitoe <scvitti@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agocfq-iosched: Fix wrong children_weight calculation
Toshiaki Makita [Tue, 26 Aug 2014 11:56:36 +0000]
cfq-iosched: Fix wrong children_weight calculation

commit e15693ef18e13e3e6bffe891fe140f18b8ff6d07 upstream.

cfq_group_service_tree_add() is applying new_weight at the beginning of
the function via cfq_update_group_weight().
This actually allows weight to change between adding it to and subtracting
it from children_weight, and triggers WARN_ON_ONCE() in
cfq_group_service_tree_del(), or even causes oops by divide error during
vfr calculation in cfq_group_service_tree_add().

The detailed scenario is as follows:
1. Create blkio cgroups X and Y as a child of X.
   Set X's weight to 500 and perform some I/O to apply new_weight.
   This X's I/O completes before starting Y's I/O.
2. Y starts I/O and cfq_group_service_tree_add() is called with Y.
3. cfq_group_service_tree_add() walks up the tree during children_weight
   calculation and adds parent X's weight (500) to children_weight of root.
   children_weight becomes 500.
4. Set X's weight to 1000.
5. X starts I/O and cfq_group_service_tree_add() is called with X.
6. cfq_group_service_tree_add() applies its new_weight (1000).
7. I/O of Y completes and cfq_group_service_tree_del() is called with Y.
8. I/O of X completes and cfq_group_service_tree_del() is called with X.
9. cfq_group_service_tree_del() subtracts X's weight (1000) from
   children_weight of root. children_weight becomes -500.
   This triggers WARN_ON_ONCE().
10. Set X's weight to 500.
11. X starts I/O and cfq_group_service_tree_add() is called with X.
12. cfq_group_service_tree_add() applies its new_weight (500) and adds it
    to children_weight of root. children_weight becomes 0. Calcularion of
    vfr triggers oops by divide error.

weight should be updated right before adding it to children_weight.

Reported-by: Ruki Sekiya <sekiya.ruki@lab.ntt.co.jp>
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoALSA: pcm: fix fifo_size frame calculation
Clemens Ladisch [Sun, 21 Sep 2014 20:50:57 +0000]
ALSA: pcm: fix fifo_size frame calculation

commit a9960e6a293e6fc3ed414643bb4e4106272e4d0a upstream.

The calculated frame size was wrong because snd_pcm_format_physical_width()
actually returns the number of bits, not bytes.

Use snd_pcm_format_size() instead, which not only returns bytes, but also
simplifies the calculation.

Fixes: 8bea869c5e56 ("ALSA: PCM midlevel: improve fifo_size handling")
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoALSA: hda - Fix invalid pin powermap without jack detection
Takashi Iwai [Thu, 11 Sep 2014 10:59:21 +0000]
ALSA: hda - Fix invalid pin powermap without jack detection

commit 7a9744cb455e6faa287e148394b4b422a6f3c5c4 upstream.

When a driver is set up without the jack detection explicitly (either
by passing a model option or via a specific fixup), the pin powermap
of IDT/STAC codecs is set up wrongly, resulting in the silence
output.  It's because of a logic failure in stac_init_power_map().
It tries to avoid creating a callback for the pins that have other
auto-hp and auto-mic callbacks, but the check is done in a wrong way
at a wrong time.  The stac_init_power_map() should be called after
creating other jack detection ctls, and the jack callback should be
created only for jack-detectable widgets.

This patch fixes the check in stac_init_power_map() and its callee
at the right place, after snd_hda_gen_build_controls().

Reported-by: Adam Richter <adam_richter2004@yahoo.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>