7 years agoi2c-i801: Support SMBus multiplexing on Asus Z8 series
Jean Delvare [Fri, 5 Oct 2012 20:23:53 +0000]
i2c-i801: Support SMBus multiplexing on Asus Z8 series

Add support for SMBus multiplexing on Asus Z8 motherboard series. On
these boards, the memory slots are behind a GPIO-controlled I2C
multiplexer. Models with 6 or 12 memory slots have 2 segments behind
the multiplexer, while models with 18 memory slots have 3 such
segments.

On these boards, only the memory slots are behind the multiplexer,
so it is possible to keep the autodetection mechanism.

The code is generic enough so it could work on other boards as long as
the multiplexer is controlled by GPIO pins. For other forms of
multiplexing (for example using an I2C device) additional code will be
needed.

Thanks to Asus for providing a board to develop and test this feature,
as well as all the technical information required.

At the moment, the GPIO driver must be loaded before the i2c-i801
driver, but I hope to solve this soon, using deferred probing on
the i2c-mux-gpio side.

Signed-off-by: Jean Delvare <khali@linux-fr.org>

7 years agoi2c-viapro: Add VIA VX900 device ID
Jean Delvare [Fri, 5 Oct 2012 20:23:53 +0000]
i2c-viapro: Add VIA VX900 device ID

The SMBus controller in the VIA VX900 appears to be compatible with
the VIA VX855, so just add the device ID.

This closes kernel bug #43096.

Signed-off-by: Jean Delvare <khali@linux-fr.org>

7 years agoi2c-parport: i2c_parport_irq can be static
Jean Delvare [Fri, 5 Oct 2012 20:23:53 +0000]
i2c-parport: i2c_parport_irq can be static

i2c_parport_irq is only called internally so it can be static.

Signed-off-by: Jean Delvare <khali@linux-fr.org>

7 years agoi2c-designware: i2c_dw_xfer_msg can be static
Jean Delvare [Fri, 5 Oct 2012 20:23:53 +0000]
i2c-designware: i2c_dw_xfer_msg can be static

i2c_dw_xfer_msg is only called internally so it can be static. It
original was, before the driver split. No idea why it was changed at
that time.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Dirk Brandewie <dirk.brandewie@gmail.com>

7 years agoi2c/scx200_*: Replace printks with pr_<level>s
Jim Cromie [Fri, 5 Oct 2012 20:23:52 +0000]
i2c/scx200_*: Replace printks with pr_<level>s

Replace printks with pr_<level>s, add pr_fmt()s to replace NAMEs

Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Reviewed-by: Joe Perches <joe@perches.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

7 years agoi2c: Make I2C available on UML
Peter Huewe [Fri, 5 Oct 2012 20:23:52 +0000]
i2c: Make I2C available on UML

Remove the global dependency of the I2C subsystem on HAS_IOMEM and
move the dependency to the i2c/busses submenu, with an exception for
i2c-stub.

The generic I2C part does not need to have HAS_IOMEM set and thus now
becomes available in UML, so the I2C subsystem can now be used, e.g.
by the i2c-stub driver, for development of I2C device drivers.

[JD: Some adjustments.]

[Heiko Carstens: Keep I2C disabled on S390.]

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

7 years agoi2c: Convert struct i2c_msg initialization to C99 format
Shubhrajyoti D [Fri, 5 Oct 2012 20:23:52 +0000]
i2c: Convert struct i2c_msg initialization to C99 format

Convert the struct i2c_msg initialization to C99 format. This makes
maintaining and editing the code simpler. Also helps once other fields
like transferred are added in future.

Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

7 years agoi2c-smbus: Convert kzalloc to devm_kzalloc
Julia Lawall [Fri, 5 Oct 2012 20:23:52 +0000]
i2c-smbus: Convert kzalloc to devm_kzalloc

Converting kzalloc to devm_kzalloc simplifies the code and ensures that the
result, alert, is freed after the irq allocated by the subsequent
devm_request_irq.  This in turn ensures that when an interrupt can be
triggered, the alert structure is still available.

The problem of a free after a devm_request_irq was found using the
following semantic match (http://coccinelle.lip6.fr/)

// <smpl>
@r exists@
expression e1,e2,x,a,b,c,d;
identifier free;
position p1,p2;
@@

  devm_request_irq@p1(e1,e2,...,x)
  ... when any
      when != e2 = a
      when != x = b
  if (...) {
    ... when != e2 = c
        when != x = d
    free@p2(...,x,...);
    ...
    return ...;
  }
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

7 years agoi2c-mux: Add support for device auto-detection
Jean Delvare [Fri, 5 Oct 2012 20:23:51 +0000]
i2c-mux: Add support for device auto-detection

Let I2C bus segments behind multiplexers have a class. This allows for
device auto-detection on these segments. As long as parent segments
don't share the same class, it should be fine.

I implemented support in drivers i2c-mux-gpio and i2c-mux-pca954x. I
left i2c-mux-pca9541 and i2c-mux-pinctrl alone for the moment as I
don't know if this feature makes sense for the use cases of these
drivers.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Peter Korsgaard <peter.korsgaard@barco.com>
Cc: David Daney <david.daney@cavium.com>
Cc: Michael Lawnick <ml.lawnick@gmx.de>
Cc: Rodolfo Giometti <giometti@linux.it>

7 years agoMerge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Linus Torvalds [Fri, 5 Oct 2012 18:16:12 +0000]
Merge branch 'next' of git://git./linux/kernel/git/benh/powerpc

Pull powerpc updates from Benjamin Herrenschmidt:
 "Some highlights in addition to the usual batch of fixes:

   - 64TB address space support for 64-bit processes by Aneesh Kumar

   - Gavin Shan did a major cleanup & re-organization of our EEH support
     code (IBM fancy PCI error handling & recovery infrastructure) which
     paves the way for supporting different platform backends, along
     with some rework of the PCIe code for the PowerNV platform in order
     to remove home made resource allocations and instead use the
     generic code (which is possible after some small improvements to it
     done by Gavin).

   - Uprobes support by Ananth N Mavinakayanahalli

   - A pile of embedded updates from Freescale folks, including new SoC
     and board supports, more KVM stuff including preparing for 64-bit
     BookE KVM support, ePAPR 1.1 updates, etc..."

Fixup trivial conflicts in drivers/scsi/ipr.c

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (146 commits)
  powerpc/iommu: Fix multiple issues with IOMMU pools code
  powerpc: Fix VMX fix for memcpy case
  driver/mtd:IFC NAND:Initialise internal SRAM before any write
  powerpc/fsl-pci: use 'Header Type' to identify PCIE mode
  powerpc/eeh: Don't release eeh_mutex in eeh_phb_pe_get
  powerpc: Remove tlb batching hack for nighthawk
  powerpc: Set paca->data_offset = 0 for boot cpu
  powerpc/perf: Sample only if SIAR-Valid bit is set in P7+
  powerpc/fsl-pci: fix warning when CONFIG_SWIOTLB is disabled
  powerpc/mpc85xx: Update interrupt handling for IFC controller
  powerpc/85xx: Enable USB support in p1023rds_defconfig
  powerpc/smp: Do not disable IPI interrupts during suspend
  powerpc/eeh: Fix crash on converting OF node to edev
  powerpc/eeh: Lock module while handling EEH event
  powerpc/kprobe: Don't emulate store when kprobe stwu r1
  powerpc/kprobe: Complete kprobe and migrate exception frame
  powerpc/kprobe: Introduce a new thread flag
  powerpc: Remove unused __get_user64() and __put_user64()
  powerpc/eeh: Global mutex to protect PE tree
  powerpc/eeh: Remove EEH PE for normal PCI hotplug
  ...

7 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Linus Torvalds [Fri, 5 Oct 2012 18:11:59 +0000]
Merge git://git./linux/kernel/git/davem/net

Pull networking changes from David Miller:
 "The most important bit in here is the fix for input route caching from
  Eric Dumazet, it's a shame we couldn't fully analyze this in time for
  3.6 as it's a 3.6 regression introduced by the routing cache removal.

  Anyways, will send quickly to -stable after you pull this in.

  Other changes of note:

   1) Fix lockdep splats in team and bonding, from Eric Dumazet.

   2) IPV6 adds link local route even when there is no link local
      address, from Nicolas Dichtel.

   3) Fix ixgbe PTP implementation, from Jacob Keller.

   4) Fix excessive stack usage in cxgb4 driver, from Vipul Pandya.

   5) MAC length computed improperly in VLAN demux, from Antonio
      Quartulli."

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (26 commits)
  ipv6: release reference of ip6_null_entry's dst entry in __ip6_del_rt
  Remove noisy printks from llcp_sock_connect
  tipc: prevent dropped connections due to rcvbuf overflow
  silence some noisy printks in irda
  team: set qdisc_tx_busylock to avoid LOCKDEP splat
  bonding: set qdisc_tx_busylock to avoid LOCKDEP splat
  sctp: check src addr when processing SACK to update transport state
  sctp: fix a typo in prototype of __sctp_rcv_lookup()
  ipv4: add a fib_type to fib_info
  can: mpc5xxx_can: fix section type conflict
  can: peak_pcmcia: fix error return code
  can: peak_pci: fix error return code
  cxgb4: Fix build error due to missing linux/vmalloc.h include.
  bnx2x: fix ring size for 10G functions
  cxgb4: Dynamically allocate memory in t4_memory_rw() and get_vpd_params()
  ixgbe: add support for X540-AT1
  ixgbe: fix poll loop for FDIRCTRL.INIT_DONE bit
  ixgbe: fix PTP ethtool timestamping function
  ixgbe: (PTP) Fix PPS interrupt code
  ixgbe: Fix PTP X540 SDP alignment code for PPS signal
  ...

7 years agoMerge branch 'akpm' (Andrew's patch-bomb)
Linus Torvalds [Fri, 5 Oct 2012 18:09:16 +0000]
Merge branch 'akpm' (Andrew's patch-bomb)

Merge misc patches from Andrew Morton:
 "The MM tree is rather stuck while I wait to find out what the heck is
  happening with sched/numa.  Probably I'll need to route around all the
  code which was added to -next, sigh.

  So this is "everything else", or at least most of it - other small
  bits are still awaiting resolutions of various kinds."

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (180 commits)
  lib/decompress.c add __init to decompress_method and data
  kernel/resource.c: fix stack overflow in __reserve_region_with_split()
  omfs: convert to use beXX_add_cpu()
  taskstats: cgroupstats_user_cmd() may leak on error
  aoe: update aoe-internal version number to 50
  aoe: update documentation to better reflect aoe-plus-udev usage
  aoe: remove unused code
  aoe: make dynamic block minor numbers the default
  aoe: update and specify AoE address guards and error messages
  aoe: retain static block device numbers for backwards compatibility
  aoe: support more AoE addresses with dynamic block device minor numbers
  aoe: update documentation with new URL and VM settings reference
  aoe: update copyright year in touched files
  aoe: update internal version number to 49
  aoe: remove unused code and add cosmetic improvements
  aoe: increase net_device reference count while using it
  aoe: associate frames with the AoE storage target
  aoe: disallow unsupported AoE minor addresses
  aoe: do revalidation steps in order
  aoe: failover remote interface based on aoe_deadsecs parameter
  ...

7 years agolib/decompress.c add __init to decompress_method and data
Hein Tibosch [Fri, 5 Oct 2012 00:16:58 +0000]
lib/decompress.c add __init to decompress_method and data

Fix the warning:

  WARNING: vmlinux.o(.text+0x14cfd8): Section mismatch in reference from the variable compressed_formats to the function .init.text:gunzip()
  The function compressed_formats() references
  the function __init gunzip().
  etc..

Within decompress.c, compressed_formats[] needs 'a __initdata annotation',
because some of it's data members refer to functions which will be
unloaded after init.

Consequently, its user decompress_method() will get the __init prefix.

Signed-off-by: Hein Tibosch <hein_tibosch@yahoo.es>
Cc: Albin Tonnerre <albin.tonnerre@free-electrons.com>
Cc: Phillip Lougher <phillip@lougher.demon.co.uk>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agokernel/resource.c: fix stack overflow in __reserve_region_with_split()
T Makphaibulchoke [Fri, 5 Oct 2012 00:16:55 +0000]
kernel/resource.c: fix stack overflow in __reserve_region_with_split()

Using a recursive call add a non-conflicting region in
__reserve_region_with_split() could result in a stack overflow in the case
that the recursive calls are too deep.  Convert the recursive calls to an
iterative loop to avoid the problem.

Tested on a machine containing 135 regions.  The kernel no longer panicked
with stack overflow.

Also tested with code arbitrarily adding regions with no conflict,
embedding two consecutive conflicts and embedding two non-consecutive
conflicts.

Signed-off-by: T Makphaibulchoke <tmac@hp.com>
Reviewed-by: Ram Pai <linuxram@us.ibm.com>
Cc: Paul Gortmaker <paul.gortmaker@gmail.com>
Cc: Wei Yang <weiyang@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoomfs: convert to use beXX_add_cpu()
Wei Yongjun [Fri, 5 Oct 2012 00:16:53 +0000]
omfs: convert to use beXX_add_cpu()

Convert cpu_to_beXX(beXX_to_cpu(E1) + E2) to use beXX_add_cpu().

dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agotaskstats: cgroupstats_user_cmd() may leak on error
Jesper Juhl [Fri, 5 Oct 2012 00:16:52 +0000]
taskstats: cgroupstats_user_cmd() may leak on error

If prepare_reply() succeeds we have allocated memory for 'rep_skb'.  If
nla_reserve() then subsequently fails and returns NULL we fail to release
the memory we allocated, thus causing a leak.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Cc: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoaoe: update aoe-internal version number to 50
Ed Cashin [Fri, 5 Oct 2012 00:16:50 +0000]
aoe: update aoe-internal version number to 50

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoaoe: update documentation to better reflect aoe-plus-udev usage
Ed Cashin [Fri, 5 Oct 2012 00:16:49 +0000]
aoe: update documentation to better reflect aoe-plus-udev usage

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoaoe: remove unused code
Ed Cashin [Fri, 5 Oct 2012 00:16:47 +0000]
aoe: remove unused code

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoaoe: make dynamic block minor numbers the default
Ed Cashin [Fri, 5 Oct 2012 00:16:47 +0000]
aoe: make dynamic block minor numbers the default

Because udev use is so widespread, making the old static mapping the
default is too conservative, given the severe limitations it places on
usable AoE addresses.  Storage virtualization and larger shelves have made
the old limitations too confining.

These changes make the dynamic block device minor numbers the default,
removing the limitations on usable AoE addresses.

The static arrangement is still available with aoe_dyndevs=0, and the
aoe-stat tool from the userland aoetools package, the user space
counterpart to the aoe driver, recognizes the case where there is a
mismatch between the minor number in sysfs and the minor number in a
special device file.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoaoe: update and specify AoE address guards and error messages
Ed Cashin [Fri, 5 Oct 2012 00:16:44 +0000]
aoe: update and specify AoE address guards and error messages

In general, specific is better when it comes to messages about AoE usage
problems.  Also, explicit checks for the AoE broadcast addresses are
added.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoaoe: retain static block device numbers for backwards compatibility
Ed Cashin [Fri, 5 Oct 2012 00:16:42 +0000]
aoe: retain static block device numbers for backwards compatibility

The old mapping between AoE target shelf and slot addresses and the block
device minor number is retained as a backwards-compatible feature, with a
new "aoe_dyndevs" module parameter available for enabling dynamic block
device minor numbers.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoaoe: support more AoE addresses with dynamic block device minor numbers
Ed Cashin [Fri, 5 Oct 2012 00:16:40 +0000]
aoe: support more AoE addresses with dynamic block device minor numbers

The ATA over Ethernet protocol uses a major (shelf) and minor (slot)
address to identify a particular storage target.  These changes remove an
artificial limitation the aoe driver imposes on the use of AoE addresses.
For example, without these changes, the slot address has a maximum of 15,
but users commonly use slot numbers much greater than that.

The AoE shelf and slot address space is often used sparsely.  Instead of
using a static mapping between AoE addresses and the block device minor
number, the block device minor numbers are now allocated on demand.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoaoe: update documentation with new URL and VM settings reference
Ed Cashin [Fri, 5 Oct 2012 00:16:39 +0000]
aoe: update documentation with new URL and VM settings reference

The old area has a new URL.  Also, now that the driver can perform better,
it is worth mentioning the VM settings that help aoe to sink dirty pages
out early, avoiding unecessary memory pressure when much I/O is going on.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoaoe: update copyright year in touched files
Ed Cashin [Fri, 5 Oct 2012 00:16:38 +0000]
aoe: update copyright year in touched files

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoaoe: update internal version number to 49
Ed Cashin [Fri, 5 Oct 2012 00:16:37 +0000]
aoe: update internal version number to 49

The internal version number of the aoe driver appears in a console message
when the driver loads and is usually obtained by the user with the
userland aoe-version tool, part of the aoetools.[1]

Although this patchset includes bugfixes backported from higher-numbered
versions published on the coraid.com website, it is a form of version 49.

1. http://aoetools.sourceforge.net/

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoaoe: remove unused code and add cosmetic improvements
Ed Cashin [Fri, 5 Oct 2012 00:16:35 +0000]
aoe: remove unused code and add cosmetic improvements

This change removes some unused code and attempts to increase code
consistency.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoaoe: increase net_device reference count while using it
Ed Cashin [Fri, 5 Oct 2012 00:16:34 +0000]
aoe: increase net_device reference count while using it

This change eliminates the danger that the user could rmmod the driver for
a network interface that is being used for AoE by the aoe driver.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoaoe: associate frames with the AoE storage target
Ed Cashin [Fri, 5 Oct 2012 00:16:33 +0000]
aoe: associate frames with the AoE storage target

In the driver code, "target" and aoetgt refer to a particular remote
interface on the AoE storage target.  The latter is identified by its AoE
major and minor addresses.  Commands that are being sent to an AoE storage
target {major, minor} can be sent or retransmitted to any of the remote
MAC addresses associated with the AoE storage target.

That is, frames are naturally associated with not an aoetgt (AoE major,
AoE minor, remote MAC address) but an aoedev (AoE major, AoE minor).
Making the code reflect that reality simplifies the driver, especially
when the path to a remote MAC address becomes unusable.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoaoe: disallow unsupported AoE minor addresses
Ed Cashin [Fri, 5 Oct 2012 00:16:32 +0000]
aoe: disallow unsupported AoE minor addresses

A guard is inserted to prevent AoE minor addresses (slot addresses) higher
than 15 to be used, as they are not yet supported by the driver.

There is a change coming that will allow the aoe driver to overcome this
limit by using system device minor numbers dynamically, but until then,
this guard prevents unexpected targets from being used by the driver when
AoE targets with high minor numbers are on the AoE network.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoaoe: do revalidation steps in order
Ed Cashin [Fri, 5 Oct 2012 00:16:31 +0000]
aoe: do revalidation steps in order

The discovery process begins with an optional AoE config query command and
an AoE config query response.  Normally when an aoe device is already
open, the config query response does not trigger an ATA identify device
command to be sent out, since the response contains storage capacity
information that, if changed, could surprise the user of the device.

The userland "aoe-revalidate" tool uses a character device to trigger an
AoE config query for a particular AoE storage target and an ATA device
identify command, even when the device is open.

This change causes the config query to go out first, reflecting the normal
discovery sequence.  The responses could come back in any order, so this
change is fairly cosmetic.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoaoe: failover remote interface based on aoe_deadsecs parameter
Ed Cashin [Fri, 5 Oct 2012 00:16:29 +0000]
aoe: failover remote interface based on aoe_deadsecs parameter

The aoe_deadsecs module parameter allows the user to specify a hard limit
on the number of seconds an AoE command can be retransmitted before the
AoE block device is considered to have failed.

Using aoe_deadsecs to determine the time we try using a different remote
interface helps to ensure that the hard limit is not reached before we've
tried to recover by sending to a different remote port.

As a data storage target, the AoE target is unambiguously identified by
its {major, minor} AoE address tuple, and an AoE target can have multiple
MAC addresses.  However, note that "target" in the driver code and
comments means a {major, minor, MAC address} tuple, as in "somewhere to
send packets".

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoaoe: use packets that work with the smallest-MTU local interface
Ed Cashin [Fri, 5 Oct 2012 00:16:27 +0000]
aoe: use packets that work with the smallest-MTU local interface

Users with several network interfaces dedicated to AoE generally do not
configure them to support different-sized AoE data payloads on purpose.

For a given AoE target, there will be a set of local network interfaces
that can reach it.  Using only the payload that will fit in the
smallest-sized MTU of all those local interfaces greatly simplifies the
driver, especially in failure scenarios.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoaoe: use a kernel thread for transmissions
Ed Cashin [Fri, 5 Oct 2012 00:16:25 +0000]
aoe: use a kernel thread for transmissions

The dev_queue_xmit function needs to have interrupts enabled, so the most
simple way to get the locking right but still fulfill that requirement is
to use a process that can call dev_queue_xmit serially over queued
transmissions.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoaoe: become I/O request queue handler for increased user control
Ed Cashin [Fri, 5 Oct 2012 00:16:23 +0000]
aoe: become I/O request queue handler for increased user control

To allow users to choose an elevator algorithm for their particular
workloads, change from a make_request-style driver to an
I/O-request-queue-handler-style driver.

We have to do a couple of things that might be surprising.  We manipulate
the page _count directly on the assumption that we still have no guarantee
that users of the block layer are prohibited from submitting bios
containing pages with zero reference counts.[1] If such a prohibition now
exists, I can get rid of the _count manipulation.

Just as before this patch, we still keep track of the sk_buffs that the
network layer still hasn't finished yet and cap the resources we use with
a "pool" of skbs.[2]

Now that the block layer maintains the disk stats, the aoe driver's
diskstats function can go away.

1. https://lkml.org/lkml/2007/3/1/374
2. https://lkml.org/lkml/2007/7/6/241

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoaoe: kernel thread handles I/O completions for simple locking
Ed Cashin [Fri, 5 Oct 2012 00:16:21 +0000]
aoe: kernel thread handles I/O completions for simple locking

Make the frames the aoe driver uses to track the relationship between bios
and packets more flexible and detached, so that they can be passed to an
"aoe_ktio" thread for completion of I/O.

The frames are handled much like skbs, with a capped amount of
preallocation so that real-world use cases are likely to run smoothly and
degenerate gracefully even under memory pressure.

Decoupling I/O completion from the receive path and serializing it in a
process makes it easier to think about the correctness of the locking in
the driver, especially in the case of a remote MAC address becoming
unusable.

[dan.carpenter@oracle.com: cleanup an allocation a bit]
Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoaoe: for performance support larger packet payloads
Ed Cashin [Fri, 5 Oct 2012 00:16:20 +0000]
aoe: for performance support larger packet payloads

tAdd adds the ability to work with large packets composed of a number of
segments, using the scatter gather feature of the block layer (biovecs)
and the network layer (skb frag array).  The motivation is the performance
gained by using a packet data payload greater than a page size and by
using the network card's scatter gather feature.

Users of the out-of-tree aoe driver already had these changes, but since
early 2011, they have complained of increased memory utilization and
higher CPU utilization during heavy writes.[1] The commit below appears
related, as it disables scatter gather on non-IP protocols inside the
harmonize_features function, even when the NIC supports sg.

  commit f01a5236bd4b140198fbcc550f085e8361fd73fa
  Author: Jesse Gross <jesse@nicira.com>
  Date:   Sun Jan 9 06:23:31 2011 +0000

      net offloading: Generalize netif_get_vlan_features().

With that regression in place, transmits always linearize sg AoE packets,
but in-kernel users did not have this patch.  Before 2.6.38, though, these
changes were working to allow sg to increase performance.

1. http://www.spinics.net/lists/linux-mm/msg15184.html

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agonbd: handle discard requests
Paul Clements [Fri, 5 Oct 2012 00:16:18 +0000]
nbd: handle discard requests

Add discard support to nbd.  If the nbd-server supports discard, it will
send NBD_FLAG_SEND_TRIM to the client.  The client will then set the flag
in the kernel via NBD_SET_FLAGS, which tells the kernel to enable discards
for the device (QUEUE_FLAG_DISCARD).

If discard support is enabled, then when the nbd client system receives a
discard request, this will be passed along to the nbd-server.  When the
discard request is received by the nbd-server, it will perform:

fallocate(.. FALLOC_FL_PUNCH_HOLE ..)

To punch a hole in the backend storage, which is no longer needed.

Signed-off-by: Paul Clements <paul.clements@steeleye.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agonbd: add set flags ioctl
Paul Clements [Fri, 5 Oct 2012 00:16:15 +0000]
nbd: add set flags ioctl

Add a set-flags ioctl, allowing various option flags to be set on an nbd
device.  This allows the nbd-client to set the device flags (to enable
read-only mode, or enable discard support, etc.).

Flags are typically specified by the nbd-server.  During the negotiation
phase of the nbd connection, the server sends its flags to the client.
The client then uses NBD_SET_FLAGS to inform the kernel of the options.

Also included is a one-line fix to debug output for the set-timeout ioctl.

Signed-off-by: Paul Clements <paul.clements@steeleye.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agorapidio: add destination ID allocation mechanism
Alexandre Bounine [Fri, 5 Oct 2012 00:16:13 +0000]
rapidio: add destination ID allocation mechanism

Replace the single global destination ID counter with per-net allocation
mechanism to allow independent destID management for each available
RapidIO network.  Using bitmap based mechanism instead of counters allows
destination ID release and reuse in systems that support hot-swap.

Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agorapidio/rionet: rework to support multiple RIO master ports
Alexandre Bounine [Fri, 5 Oct 2012 00:16:11 +0000]
rapidio/rionet: rework to support multiple RIO master ports

Make RIONET driver multi-net safe/capable by introducing per-net lists of
RapidIO network peers.  Rework registration of network adapters to support
all available RIO master port devices.

Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agorapidio: run discovery as an asynchronous process
Alexandre Bounine [Fri, 5 Oct 2012 00:16:08 +0000]
rapidio: run discovery as an asynchronous process

Modify mport initialization routine to run the RapidIO discovery process
asynchronously.  This allows to have an arbitrary order of enumerating and
discovering ports in systems with multiple RapidIO controllers without
creating a deadlock situation if enumerator port is registered after a
discovering one.

Making netID matching to mportID ensures consistent net ID assignment in
multiport RapidIO systems with asynchronous discovery process (global
counter implementation is affected by race between threads).

[akpm@linux-foundation.org: tweak code layput]
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agorapidio: use device lists handling on per-net basis
Alexandre Bounine [Fri, 5 Oct 2012 00:16:05 +0000]
rapidio: use device lists handling on per-net basis

Modify handling of device lists to resolve issues caused by using single
global list of RIO devices during enumeration/discovery.  The most common
sign of existing issue is incorrect contents of switch routing tables in
systems with multiple mport controllers while single-port configuration
performs as expected.

Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agorapidio: fix blocking wait for discovery ready
Alexandre Bounine [Fri, 5 Oct 2012 00:16:04 +0000]
rapidio: fix blocking wait for discovery ready

The following set of patches provides modifications targeting support of
multiple RapidIO master port (mport) devices on a CPU-side of
RapidIO-capable board.  While the RapidIO subsystem code has definitions
suitable for multi-controller/multi-net support, the existing
implementation cannot be considered ready for multiple mport
configurations.

=========== NOTES: =============

a) The patches below do not address RapidIO side view of multiport
   processing elements defined in Part 6 of RapidIO spec Rev.2.1 (section
   6.4.1).  These devices have Base Device ID CSR (0x60) and Component Tag
   CSR (0x6C) shared by all SRIO ports.  For example, Freescale's P4080,
   P3041 and P5020 have a dual-port SRIO controller implemented according
   the specification.  Enumeration/discovery of such devices from RapidIO
   side may require device-specific fixups.

b) Devices referenced above may also require implementation specific
   code to setup a host device ID for mport device.  These operations are
   not addressed by patches in this package.

=================================

Details about provided patches:

1. Fix blocking wait for discovery ready

   While it does not happen on PowerPC based platforms, there is
   possibility of stalled CPU warning dump on x86 based platforms that run
   RapidIO discovery process if they wait too long for being enumerated.

   Currently users can avoid it by disabling the soft-lockup detector
   using "nosoftlockup" kernel parameter OR by ensuring that enumeration
   is completed before soft-lockup is detected.

   This patch eliminates blocking wait and keeps a scheduler running.
   It also is required for patch 3 below which introduces asynchronous
   discovery process.

2. Use device lists handling on per-net basis

   This patch allows to correctly support multiple RapidIO nets and
   resolves possible issues caused by using single global list of devices
   during RapidIO system enumeration/discovery.  The most common sign of
   existing issue is incorrect contents of switch routing tables in
   systems with multiple mport controllers while single-port configuration
   performs as expected.

   The patch does not eliminate the global RapidIO device list but
   changes some routines in enumeration/discovery to use per-net device
   lists instead.  This way compatibility with upper layer RIO routines is
   preserved.

3.  Run discovery as an asynchronous process

   This patch modifies RapidIO initialization routine to asynchronously
   run the discovery process for each corresponding mport.  This allows
   having an arbitrary order of enumerating and discovering mports without
   creating a deadlock situation if an enumerator port was registered
   after a discovering one.

   On boards with multiple discovering mports it also eliminates order
   dependency between mports and may reduce total time of RapidIO
   subsystem initialization.

   Making netID matching to mportID ensures consistent netID assignment
   in multiport RapidIO systems with asynchronous discovery process
   (global counter implementation is affected by race between threads).

4. Rework RIONET to support multiple RIO master ports

   In the current version of the driver rionet_probe() has comment "XXX
   Make multi-net safe".  Now it is a good time to address this comment.

   This patch makes RIONET driver multi-net safe/capable by introducing
   per-net lists of RapidIO network peers.  It also enables to register
   network adapters for all available mport devices.

5. Add destination ID allocation mechanism

   The patch replaces a single global destination ID counter with
   per-net allocation mechanism to allow independent destID management for
   each available RapidIO network.  Using bitmap based mechanism instead
   of counters allows destination ID release and reuse in systems that
   support hot-swap.

This patch:

Fix blocking wait loop in the RapidIO discovery routine to avoid warning
dumps about stalled CPU on x86 platforms.

Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agorapidio: apply RX/TX enable to active switch ports only
Alexandre Bounine [Fri, 5 Oct 2012 00:16:02 +0000]
rapidio: apply RX/TX enable to active switch ports only

Apply port RX/TX enable operations only to active switch ports.

RapidIO specification (Part 6: LP-Serial Physical Layer) recommends to
keep Output Port Enable (TX) and Input Port Enable (RX) control bits in
disabled state (0b0) after device reset.  It also allows to have
implementation specific reset state for these bits.

This patch ensures that TX/RX enable action is applied only to active
switch's ports while preserving an initial state of inactive ones.

This patch is intended to keep inactive switch ports with inbound and
outbound packet transfers disabled to block unexpected packets during hot
insertion event.  While it does not fix any visible malfunction it is
intended to prevent such events in future.

Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agorapidio/tsi721: add inbound memory mapping callbacks
Alexandre Bounine [Fri, 5 Oct 2012 00:16:00 +0000]
rapidio/tsi721: add inbound memory mapping callbacks

Add Tsi721 routines to support RapidIO subsystem's inbound memory mapping
interface (RapidIO to system's local memory).

Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agorapidio: add inbound memory mapping interface
Alexandre Bounine [Fri, 5 Oct 2012 00:15:57 +0000]
rapidio: add inbound memory mapping interface

Add common inbound memory mapping/unmapping interface. This allows to make
local memory space accessible from the RapidIO side using hardware mapping
capabilities of RapidIO bridging devices. The new interface is intended to
enable data transfers between RapidIO devices in combination with DMA engine
support.

This patch is based on patch submitted by Li Yang <leoli@freescale.com>
(https://lists.ozlabs.org/pipermail/linuxppc-dev/2009-April/071210.html)

Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agodrivers/rapidio/devices/tsi721.c: fix error return code
Peter Senna Tschudin [Fri, 5 Oct 2012 00:15:55 +0000]
drivers/rapidio/devices/tsi721.c: fix error return code

Convert a nonnegative error return code to a negative one, as returned
elsewhere in the function.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
(
if@p1 (\(ret < 0\|ret != 0\))
 { ... return ret; }
|
ret@p1 = 0
)
... when != ret = e1
    when != &ret
*if(...)
{
  ... when != ret = e2
      when forall
 return ret;
}
// </smpl>

Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Acked-by: Alexandre Bounine <alexandre.bounine@idt.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agorapidio: fix kerneldoc warnings after DMA support was added
Alexandre Bounine [Fri, 5 Oct 2012 00:15:52 +0000]
rapidio: fix kerneldoc warnings after DMA support was added

Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
Cc: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agorapidio/tsi721: modify mport name assignment
Alexandre Bounine [Fri, 5 Oct 2012 00:15:51 +0000]
rapidio/tsi721: modify mport name assignment

Modify RapidIO mport device name assignment to include device name of PCIe
side of Tsi721 bridge.  The new name format is intended to provide
definitive reference between RapidIO and PCIe sides of the bridge in
systems with multiple Tsi721 bridges.

Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agorapidio/rionet: fix multicast packet transmit logic
Alexandre Bounine [Fri, 5 Oct 2012 00:15:48 +0000]
rapidio/rionet: fix multicast packet transmit logic

Fix multicast packet transmit logic to account for repetitive transmission
of single skb:
- correct check for available buffers (this bug may produce NULL pointer
  crash dump in case of heavy traffic);
- update skb user count (incorrect user counter causes a warning dump from
  net_tx_action routine during multicast transfers in systems with three or
  more rionet participants).

Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agokdump: remove unneeded include
Wei Yongjun [Fri, 5 Oct 2012 00:15:47 +0000]
kdump: remove unneeded include

The inclusion of <generated/utsrelease.h> is unnecessary.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Reviewed-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agofs/proc/root.c: use NULL instead of 0 for pointer
Sachin Kamat [Fri, 5 Oct 2012 00:15:46 +0000]
fs/proc/root.c: use NULL instead of 0 for pointer

This cleanup also fixes the following sparse warning:

  fs/proc/root.c:64:45: warning: Using plain integer as NULL pointer

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoproc_sysctl.c: use BUG_ON instead of BUG
Prasad Joshi [Fri, 5 Oct 2012 00:15:45 +0000]
proc_sysctl.c: use BUG_ON instead of BUG

The use of if (!head) BUG(); can be replaced with the single line
BUG_ON(!head).

Signed-off-by: Prasad Joshi <prasadjoshi.linux@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoproc: use kzalloc instead of kmalloc and memset
yan [Fri, 5 Oct 2012 00:15:43 +0000]
proc: use kzalloc instead of kmalloc and memset

Part of the memory will be written twice after this change, but that
should be negligible.

[akpm@linux-foundation.org: fix __proc_create() coding-style issues, remove unneeded zero-initialisations]
Signed-off-by: yan <clouds.yan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoproc: no need to initialize proc_inode->fd in proc_get_inode()
yan [Fri, 5 Oct 2012 00:15:41 +0000]
proc: no need to initialize proc_inode->fd in proc_get_inode()

proc_get_inode() obtains the inode via a call to iget_locked().
iget_locked() calls alloc_inode() which will call proc_alloc_inode() which
clears proc_inode.fd, so there is no need to clear this field in
proc_get_inode().

If iget_locked() instead found the inode via find_inode_fast(), that inode
will not have I_NEW set so this change has no effect.

Signed-off-by: yan <clouds.yan@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoproc: return -ENOMEM when inode allocation failed
yan [Fri, 5 Oct 2012 00:15:38 +0000]
proc: return -ENOMEM when inode allocation failed

If proc_get_inode() returns NULL then presumably it encountered memory
exhaustion.  proc_lookup_de() should return -ENOMEM in this case, not
-EINVAL.

Signed-off-by: yan <clouds.yan@gmail.com>
Cc: Ryan Mallon <rmallon@gmail.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agocoredump: extend core dump note section to contain file names of mapped files
Denys Vlasenko [Fri, 5 Oct 2012 00:15:36 +0000]
coredump: extend core dump note section to contain file names of mapped files

This note has the following format:

long count     -- how many files are mapped
long page_size -- units for file_ofs
array of [COUNT] elements of
   long start
   long end
   long file_ofs
followed by COUNT filenames in ASCII: "FILE1" NUL "FILE2" NUL...

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Amerigo Wang <amwang@redhat.com>
Cc: "Jonathan M. Foote" <jmfoote@cert.org>
Cc: Roland McGrath <roland@hack.frob.com>
Cc: Pedro Alves <palves@redhat.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agocoredump: add a new elf note with siginfo of the signal
Denys Vlasenko [Fri, 5 Oct 2012 00:15:35 +0000]
coredump: add a new elf note with siginfo of the signal

Existing PRSTATUS note contains only si_signo, si_code, si_errno fields
from the siginfo of the signal which caused core to be dumped.

There are tools which try to analyze crashes for possible security
implications, and they want to use, among other data, si_addr field from
the SIGSEGV.

This patch adds a new elf note, NT_SIGINFO, which contains the complete
siginfo_t of the signal which killed the process.

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Cc: Amerigo Wang <amwang@redhat.com>
Cc: "Jonathan M. Foote" <jmfoote@cert.org>
Cc: Roland McGrath <roland@hack.frob.com>
Cc: Pedro Alves <palves@redhat.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agocompat: move compat_siginfo_t definition to asm/compat.h
Denys Vlasenko [Fri, 5 Oct 2012 00:15:31 +0000]
compat: move compat_siginfo_t definition to asm/compat.h

This is a preparatory patch for the introduction of NT_SIGINFO elf note.

Make the location of compat_siginfo_t uniform across eight architectures
which have it.  Now it can be pulled in by including asm/compat.h or
linux/compat.h.

Most of the copies are verbatim.  compat_uid[32]_t had to be replaced by
__compat_uid[32]_t.  compat_uptr_t had to be moved up before
compat_siginfo_t in asm/compat.h on a several architectures (tile already
had it moved up).  compat_sigval_t had to be relocated from linux/compat.h
to asm/compat.h.

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Amerigo Wang <amwang@redhat.com>
Cc: "Jonathan M. Foote" <jmfoote@cert.org>
Cc: Roland McGrath <roland@hack.frob.com>
Cc: Pedro Alves <palves@redhat.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agocoredump: pass siginfo_t* to do_coredump() and below, not merely signr
Denys Vlasenko [Fri, 5 Oct 2012 00:15:29 +0000]
coredump: pass siginfo_t* to do_coredump() and below, not merely signr

This is a preparatory patch for the introduction of NT_SIGINFO elf note.

With this patch we pass "siginfo_t *siginfo" instead of "int signr" to
do_coredump() and put it into coredump_params.  It will be used by the
next patch.  Most changes are simple s/signr/siginfo->si_signo/.

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Cc: Amerigo Wang <amwang@redhat.com>
Cc: "Jonathan M. Foote" <jmfoote@cert.org>
Cc: Roland McGrath <roland@hack.frob.com>
Cc: Pedro Alves <palves@redhat.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agocoredump: use SUID_DUMPABLE_ENABLED rather than hardcoded 1
Oleg Nesterov [Fri, 5 Oct 2012 00:15:27 +0000]
coredump: use SUID_DUMPABLE_ENABLED rather than hardcoded 1

Cosmetic. Change setup_new_exec() and task_dumpable() to use
SUID_DUMPABLE_ENABLED for /bin/grep.

[akpm@linux-foundation.org: checkpatch fixes]
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agocoredump: add support for %d=__get_dumpable() in core name
Oleg Nesterov [Fri, 5 Oct 2012 00:15:25 +0000]
coredump: add support for %d=__get_dumpable() in core name

Some coredump handlers want to create a core file in a way compatible with
standard behavior.  Standard behavior with fs.suid_dumpable = 2 is to
create core file with uid=gid=0.  However, there was no way for coredump
handler to know that the process being dumped was suid'ed.

This patch adds the new %d specifier for format_corename() which simply
reports __get_dumpable(mm->flags), this is compatible with
/proc/sys/fs/suid_dumpable we already have.

Addresses https://bugzilla.redhat.com/show_bug.cgi?id=787135

Developed during a discussion with Denys Vlasenko.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Denys Vlasenko <vda.linux@googlemail.com>
Cc: Alex Kelly <alex.page.kelly@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Cong Wang <amwang@redhat.com>
Cc: Jiri Moskovcak <jmoskovc@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agocoredump: update coredump-related headers
Alex Kelly [Fri, 5 Oct 2012 00:15:24 +0000]
coredump: update coredump-related headers

Create a new header file, fs/coredump.h, which contains functions only
used by the new coredump.c.  It also moves do_coredump to the
include/linux/coredump.h header file, for consistency.

Signed-off-by: Alex Kelly <alex.page.kelly@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agocoredump: make core dump functionality optional
Alex Kelly [Fri, 5 Oct 2012 00:15:23 +0000]
coredump: make core dump functionality optional

Adds an expert Kconfig option, CONFIG_COREDUMP, which allows disabling of
core dump.  This saves approximately 2.6k in the compiled kernel, and
complements CONFIG_ELF_CORE, which now depends on it.

CONFIG_COREDUMP also disables coredump-related sysctls, except for
suid_dumpable and related functions, which are necessary for ptrace.

[akpm@linux-foundation.org: fix binfmt_aout.c build]
Signed-off-by: Alex Kelly <alex.page.kelly@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agodevice_cgroup: rename whitelist to exception list
Aristeu Rozanski [Fri, 5 Oct 2012 00:15:20 +0000]
device_cgroup: rename whitelist to exception list

This patch replaces the "whitelist" usage in the code and comments and replace
them by exception list related information.

Signed-off-by: Aristeu Rozanski <aris@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: James Morris <jmorris@namei.org>
Cc: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Serge E. Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agodevice_cgroup: convert device_cgroup internally to policy + exceptions
Aristeu Rozanski [Fri, 5 Oct 2012 00:15:17 +0000]
device_cgroup: convert device_cgroup internally to policy + exceptions

The original model of device_cgroup is having a whitelist where all the
allowed devices are listed. The problem with this approach is that is
impossible to have the case of allowing everything but few devices.

The reason for that lies in the way the whitelist is handled internally:
since there's only a whitelist, the "all devices" entry would have to be
removed and replaced by the entire list of possible devices but the ones
that are being denied.  Since dev_t is 32 bits long, representing the allowed
devices as a bitfield is not memory efficient.

This patch replaces the "whitelist" by a "exceptions" list and the default
policy is kept as "deny_all" variable in dev_cgroup structure.

The current interface determines that whenever "a" is written to devices.allow
or devices.deny, the entry masking all devices will be added or removed,
respectively. This behavior is kept and it's what will determine the default
policy:

# cat devices.list
a *:* rwm
# echo a >devices.deny
# cat devices.list
# echo a >devices.allow
# cat devices.list
a *:* rwm

The interface is also preserved. For example, if one wants to block only access
to /dev/null:
# ls -l /dev/null
crw-rw-rw- 1 root root 1, 3 Jul 24 16:17 /dev/null
# echo a >devices.allow
# echo "c 1:3 rwm" >devices.deny
# cat /dev/null
cat: /dev/null: Operation not permitted
# echo >/dev/null
bash: /dev/null: Operation not permitted
mknod /tmp/null c 1 3
mknod: `/tmp/null': Operation not permitted
# echo "c 1:3 r" >devices.allow
# cat /dev/null
# echo >/dev/null
bash: /dev/null: Operation not permitted
mknod /tmp/null c 1 3
mknod: `/tmp/null': Operation not permitted
# echo "c 1:3 rw" >devices.allow
# echo >/dev/null
# cat /dev/null
# mknod /tmp/null c 1 3
mknod: `/tmp/null': Operation not permitted
# echo "c 1:3 rwm" >devices.allow
# echo >/dev/null
# cat /dev/null
# mknod /tmp/null c 1 3
#

Note that I didn't rename the functions/variables in this patch, but in the
next one to make reviewing easier.

Signed-off-by: Aristeu Rozanski <aris@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: James Morris <jmorris@namei.org>
Cc: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Serge E. Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agodevice_cgroup: introduce dev_whitelist_clean()
Aristeu Rozanski [Fri, 5 Oct 2012 00:15:15 +0000]
device_cgroup: introduce dev_whitelist_clean()

This function cleans all the items in a whitelist and will be used by the next
patches.

Signed-off-by: Aristeu Rozanski <aris@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: James Morris <jmorris@namei.org>
Cc: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Serge E. Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agodevice_cgroup: add "deny_all" in dev_cgroup structure
Aristeu Rozanski [Fri, 5 Oct 2012 00:15:13 +0000]
device_cgroup: add "deny_all" in dev_cgroup structure

deny_all will determine if the default policy is to deny all device access
unless for the ones in the exception list.

This variable will be used in the next patches to convert device_cgroup
internally into a default policy + rules.

Signed-off-by: Aristeu Rozanski <aris@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: James Morris <jmorris@namei.org>
Cc: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Serge E. Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agokernel-doc: don't mangle whitespace in Example section
Daniel Santos [Fri, 5 Oct 2012 00:15:10 +0000]
kernel-doc: don't mangle whitespace in Example section

A section with the name "Example" (case-insensitive) has a special meaning
to kernel-doc.  These sections are output using mono-type fonts.  However,
leading whitespace is stripped, thus robbing a lot of meaning from this,
as indented code examples will be mangled.

This patch preserves the leading whitespace for "Example" sections.  More
accurately, it preserves it for all sections, but removes it later if the
section isn't an "Example" section.

Signed-off-by: Daniel Santos <daniel.santos@pobox.com>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agokernel-doc: bugfix - empty line in Example section
Daniel Santos [Fri, 5 Oct 2012 00:15:08 +0000]
kernel-doc: bugfix - empty line in Example section

If you have a section named "Example" that contains an empty line,
attempting to generate htmldocs give you the error:

/path/Documentation/DocBook/kernel-api.xml:3455: parser error : Opening and ending tag mismatch: programlisting line 3449 and para
   </para><para>
          ^
/path/Documentation/DocBook/kernel-api.xml:3473: parser error : Opening and ending tag mismatch: para line 3467 and programlisting
</programlisting></informalexample>
                 ^
/path/Documentation/DocBook/kernel-api.xml:3678: parser error : Opening and ending tag mismatch: programlisting line 3672 and para
   </para><para>
          ^
/path/Documentation/DocBook/kernel-api.xml:3701: parser error : Opening and ending tag mismatch: para line 3690 and programlisting
</programlisting></informalexample>
                 ^
unable to parse
/path/Documentation/DocBook/kernel-api.xml

Essentially, the script attempts to close a <programlisting> with a
closing tag for a <para> block.  This patch corrects the problem by
simply not outputting anything extra when we're dumping pre-formatted
text, since the empty line will be rendered correctly anyway.

Signed-off-by: Daniel Santos <daniel.santos@pobox.com>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agokernel-doc: bugfix - multi-line macros
Daniel Santos [Fri, 5 Oct 2012 00:15:05 +0000]
kernel-doc: bugfix - multi-line macros

Prior to this patch the following code breaks:

/**
 * multiline_example - this breaks kernel-doc
 */
 #define multiline_example( \
myparam)

Producing this error:

Error(somefile.h:983): cannot understand prototype: 'multiline_example( \ '

This patch fixes the issue by appending all lines ending in a blackslash
(optionally followed by whitespace), removing the backslash and any
whitespace after it prior to appending (just like the C pre-processor
would).

This fixes a break in kerel-doc introduced by the additions to rbtree.h.

Signed-off-by: Daniel Santos <daniel.santos@pobox.com>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agofat: simplify writeback_inode()
Namjae Jeon [Fri, 5 Oct 2012 00:15:04 +0000]
fat: simplify writeback_inode()

[akpm@linux-foundation.org: checkpatch fixes]
Signed-off-by: Namjae Jeon <linkinjeon@gmail.com>
Signed-off-by: Amit Sahrawat <amit.sahrawat83@gmail.com>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agofat: no need to reset EOF in ent_put for FAT32
Namjae Jeon [Fri, 5 Oct 2012 00:15:02 +0000]
fat: no need to reset EOF in ent_put for FAT32

#define FAT_ENT_EOF(EOF_FAT32)

there is no need to reset value of 'new' for FAT32 as the values is
already correct

Signed-off-by: Namjae Jeon <linkinjeon@gmail.com>
Signed-off-by: Amit Sahrawat <amit.sahrawat83@gmail.com>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agofs/fat: fix checkpatch issues in fatent.c
Cruz Julian Bishop [Fri, 5 Oct 2012 00:14:59 +0000]
fs/fat: fix checkpatch issues in fatent.c

1: Stop any lines going over 80 characters
2: Remove a blank line before EXPORT_SYMBOL_GPL

Signed-off-by: Cruz Julian Bishop <cruzjbishop@gmail.com>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agofs/fat: fix all other checkpatch issues in dir.c
Cruz Julian Bishop [Fri, 5 Oct 2012 00:14:57 +0000]
fs/fat: fix all other checkpatch issues in dir.c

1: Import linux/uaccess.h instead of asm.uaccess.h
2: Stop any lines going over 80 characters
3: Stopped setting any variables in if statements
4: Stopped splitting quoted strings
5: Removed unneeded parentheses

Signed-off-by: Cruz Julian Bishop <cruzjbishop@gmail.com>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agofs/fat: fix some small checkpatch issues in dir.c
Cruz Julian Bishop [Fri, 5 Oct 2012 00:14:55 +0000]
fs/fat: fix some small checkpatch issues in dir.c

Simply remove the spacing between function definitions and
EXPORT_SYMBOL_GPL calls, which were previously generating warnings.

Signed-off-by: Cruz Julian Bishop <cruzjbishop@gmail.com>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agofs/fat: fix two checkpatch issues in cache.c
Cruz Julian Bishop [Fri, 5 Oct 2012 00:14:53 +0000]
fs/fat: fix two checkpatch issues in cache.c

This does the following:
1: Splits the arguments of a function call to stop it
from exceeding 80 characters
2: Re-indents the arguments of another function call
to prevent the splitting of a quoted string.

Signed-off-by: Cruz Julian Bishop <cruzjbishop@gmail.com>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agofs/fat: chang indentation of some comments in fat.h
Cruz Julian Bishop [Fri, 5 Oct 2012 00:14:52 +0000]
fs/fat: chang indentation of some comments in fat.h

The comments were not lined up properly, so I just re-indented them.

This also fixes a stupid checkpatch issue unknowingly

Signed-off-by: Cruz Julian Bishop <cruzjbishop@gmail.com>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agofs/fat: fix some checkpatch issues in fat.h
Cruz Julian Bishop [Fri, 5 Oct 2012 00:14:49 +0000]
fs/fat: fix some checkpatch issues in fat.h

Mainly fix spacing issues such as "foo * bar" and "foo= bar"

Signed-off-by: Cruz Julian Bishop <cruzjbishop@gmail.com>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agofs/fat: fix a checkpatch issue in namei_msdos.c
Cruz Julian Bishop [Fri, 5 Oct 2012 00:14:47 +0000]
fs/fat: fix a checkpatch issue in namei_msdos.c

Add a space before an equals sign/operator in line 410.

Signed-off-by: Cruz Julian Bishop <cruzjbishop@gmail.com>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agofat (exportfs): fix dentry reconnection
Steven J. Magnani [Fri, 5 Oct 2012 00:14:45 +0000]
fat (exportfs): fix dentry reconnection

Maintain an index of directory inodes by starting cluster, so that
fat_get_parent() can return the proper cached inode rather than inventing
one that cannot be traced back to the filesystem root.

Add a new msdos/vfat binary mount option "nfs" so that FAT filesystems
that are _not_ exported via NFS are not saddled with maintenance of an
index they will never use.

Finally, simplify NFS file handle generation and lookups.  An
ext2-congruent implementation is adequate for FAT needs.

Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agofat (exportfs): move NFS support code
Steven J. Magnani [Fri, 5 Oct 2012 00:14:44 +0000]
fat (exportfs): move NFS support code

Under memory pressure, the system may evict dentries from cache.  When the
FAT driver receives a NFS request involving an evicted dentry, it is
unable to reconnect it to the filesystem root.  This causes the request to
fail, often with ENOENT.

This is partially due to ineffectiveness of the current FAT NFS
implementation, and partially due to an unimplemented fh_to_parent method.
 The latter can cause file accesses to fail on shares exported with
subtree_check.

This patch set provides the FAT driver with the ability to
reconnect dentries.  NFS file handle generation and lookups are simplified
and made congruent with ext2.

Testing has involved a memory-starved virtual machine running 3.5-rc5 that
exports a ~2 GB vfat filesystem containing a kernel tree (~770 MB, ~40000
files, 9 levels).  Both 'cp -r' and 'ls -lR' operations were performed
from a client, some overlapping, some consecutive.  Exports with
'subtree_check' and 'no_subtree_check' have been tested.

Note that while this patch set improves FAT's NFS support, it does not
eliminate ESTALE errors completely.

The following should be considered for NFS clients who are sensitive to ESTALE:

* Mounting with lookupcache=none
  Unfortunately this can degrade performance severely, particularly for deep
  filesystems.

* Incorporating VFS patches to retry ESTALE failures on the client-side,
  such as https://lkml.org/lkml/2012/6/29/381

* Handling ESTALE errors in client application code

This patch:

Move NFS-related code into its own C file.  No functional changes.

Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agofat: use accessor function for msdos_dir_entry 'start'
Namjae Jeon [Fri, 5 Oct 2012 00:14:41 +0000]
fat: use accessor function for msdos_dir_entry 'start'

Use accessor function for msdos_dir_entry 'start'

Signed-off-by: Namjae Jeon <linkinjeon@gmail.com>
Signed-off-by: Amit Sahrawat <amit.sahrawat83@gmail.com>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agohpfs: convert to use leXX_add_cpu()
Wei Yongjun [Fri, 5 Oct 2012 00:14:39 +0000]
hpfs: convert to use leXX_add_cpu()

Convert cpu_to_leXX(leXX_to_cpu(E1) + E2) to use leXX_add_cpu().

dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Cc: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agodrivers/rtc/rtc-s35390a.c: add wakealarm support for rtc-s35390A rtc chip
Michael Langer [Fri, 5 Oct 2012 00:14:37 +0000]
drivers/rtc/rtc-s35390a.c: add wakealarm support for rtc-s35390A rtc chip

Add basic get/set alarm support for the Seiko Instruments S-35390A.  The
chip is used on the QNAP TS-219P+ NAS device.

Signed-off-by: Michael Langer <michael.brainbug.langer@googlemail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agodrivers/rtc/rtc-m41t80.c: remove disabled alarm functionality
Paul Bolle [Fri, 5 Oct 2012 00:14:35 +0000]
drivers/rtc/rtc-m41t80.c: remove disabled alarm functionality

Commit c3b79770e51a ("rtc: m41t80: Workaround broken alarm
functionality") disabled m41t80's alarm functions.  But since those
functions were not touched, building this driver triggers these GCC
warnings:

    drivers/rtc/rtc-m41t80.c:216:12: warning: 'm41t80_rtc_alarm_irq_enable' defined but not used [-Wunused-function]
    drivers/rtc/rtc-m41t80.c:238:12: warning: 'm41t80_rtc_set_alarm' defined but not used [-Wunused-function]
    drivers/rtc/rtc-m41t80.c:308:12: warning: 'm41t80_rtc_read_alarm' defined but not used [-Wunused-function]

Remove these functions (and the commented out references to them) to
silence these warnings.  Anyone wanting to fix the alarm irq functionality
can easily find the removed code in the git log of this file or through
some web searches.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Cc: John Stultz <john.stultz@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agodrivers/rtc/rtc-tps65910.c: use platform_get_irq() to get RTC irq details
Venu Byravarasu [Fri, 5 Oct 2012 00:14:34 +0000]
drivers/rtc/rtc-tps65910.c: use platform_get_irq() to get RTC irq details

As RTC driver needs only irq number from platform data, using
platform_get_irq(), instead of generic dev_get_platdata().

Signed-off-by: Venu Byravarasu <vbyravarasu@nvidia.com>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agortc: kconfig: fix up dependency for ab8500
Ulf Hansson [Fri, 5 Oct 2012 00:14:32 +0000]
rtc: kconfig: fix up dependency for ab8500

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agodrivers/rtc/rtc-em3027.c: convert struct i2c_msg initialization to C99 format
Shubhrajyoti D [Fri, 5 Oct 2012 00:14:29 +0000]
drivers/rtc/rtc-em3027.c: convert struct i2c_msg initialization to C99 format

Convert the struct i2c_msg initialization to C99 format.  This makes
maintaining and editing the code simpler.  Also helps once other fields
like transferred are added in future.

Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agodrivers/rtc/rtc-isl1208.c: convert struct i2c_msg initialization to C99 format
Shubhrajyoti D [Fri, 5 Oct 2012 00:14:27 +0000]
drivers/rtc/rtc-isl1208.c: convert struct i2c_msg initialization to C99 format

Convert the struct i2c_msg initialization to C99 format.  This makes
maintaining and editing the code simpler.  Also helps once other fields
like transferred are added in future.

Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agodrivers/rtc/rtc-pcf8563.c: convert struct i2c_msg initialization to C99 format
Shubhrajyoti D [Fri, 5 Oct 2012 00:14:25 +0000]
drivers/rtc/rtc-pcf8563.c: convert struct i2c_msg initialization to C99 format

Convert the struct i2c_msg initialization to C99 format.  This makes
maintaining and editing the code simpler.  Also helps once other fields
like transferred are added in future.

Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agodrivers/rtc/rtc-rs5c372.c: convert struct i2c_msg initialization to C99 format
Shubhrajyoti D [Fri, 5 Oct 2012 00:14:22 +0000]
drivers/rtc/rtc-rs5c372.c: convert struct i2c_msg initialization to C99 format

Convert the struct i2c_msg initialization to C99 format.  This makes
maintaining and editing the code simpler.  Also helps once other fields
like transferred are added in future.  while at it also fix a checkpatch
warn WARNING: sizeof rs5c->buf should be sizeof(rs5c->buf)

Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agodrivers/rtc/rtc-s35390a.c: convert struct i2c_msg initialization to C99 format
Shubhrajyoti D [Fri, 5 Oct 2012 00:14:21 +0000]
drivers/rtc/rtc-s35390a.c: convert struct i2c_msg initialization to C99 format

Convert the struct i2c_msg initialization to C99 format.  This makes
maintaining and editing the code simpler.  Also helps once other fields
like transferred are added in future.

Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agodrivers/rtc/rtc-x1205.c: convert struct i2c_msg initialization to C99 format
Shubhrajyoti D [Fri, 5 Oct 2012 00:14:18 +0000]
drivers/rtc/rtc-x1205.c: convert struct i2c_msg initialization to C99 format

Convert the struct i2c_msg initialization to C99 format.  This makes
maintaining and editing the code simpler.  Also helps once other fields
like transferred are added in future.

Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agodrivers/rtc/rtc-ds1672.c: convert struct i2c_msg initialization to C99 format
Shubhrajyoti D [Fri, 5 Oct 2012 00:14:17 +0000]
drivers/rtc/rtc-ds1672.c: convert struct i2c_msg initialization to C99 format

Convert the struct i2c_msg initialization to C99 format.  This makes
maintaining and editing the code simpler.  Also helps once other fields
like transferred are added in future.

Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agodrivers/rtc/rtc-s3c.c: fix return value in s3c_rtc_probe()
Sachin Kamat [Fri, 5 Oct 2012 00:14:14 +0000]
drivers/rtc/rtc-s3c.c: fix return value in s3c_rtc_probe()

Return the value returned by platform_get_irq() instead of -ENOENT;

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agortc_sysfs_show_hctosys(): display 0 if resume failed
David Fries [Fri, 5 Oct 2012 00:14:12 +0000]
rtc_sysfs_show_hctosys(): display 0 if resume failed

Without this patch /sys/class/rtc/$CONFIG_RTC_HCTOSYS_DEVICE/hctosys
contains a 1 (meaning "This rtc was used to initialize the system
clock") even if setting the time by do_settimeofday() at bootup failed.
The RTC can also be used to set the clock on resume, if it did 1,
otherwise 0.  Previously there was no indication if the RTC was used
to set the clock in resume.

This uses only CONFIG_RTC_HCTOSYS_DEVICE for conditional compilation
instead of it and CONFIG_RTC_HCTOSYS to be more consistent.
rtc_hctosys_ret was moved to class.c so class.c no longer depends on
hctosys.c.

[sfr@canb.auug.org.au: fix build]
Signed-off-by: David Fries <David@Fries.net>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Uwe Kleine-K├Ânig <u.kleine-koenig@pengutronix.de>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agortc: rtc-mxc: convert to module_platform_driver
Fabio Estevam [Fri, 5 Oct 2012 00:14:10 +0000]
rtc: rtc-mxc: convert to module_platform_driver

Converting to module_platform_driver can make the code smaller and cleaner.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agortc: rtc-mxc: adapt to the new i.mx clock framework
Fabio Estevam [Fri, 5 Oct 2012 00:14:09 +0000]
rtc: rtc-mxc: adapt to the new i.mx clock framework

i.mx drivers should use clk_prepare_enable/clk_disable_unprepare() in
order to avoid clk warnings.

While at it, convert to devm_clk_get() since other devm_ functions are
used in this driver and it can also save some clk_put() calls.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>