6 years agonet_sched: info leak in atm_tc_dump_class()
Dan Carpenter [Tue, 30 Jul 2013 10:23:39 +0000]
net_sched: info leak in atm_tc_dump_class()

[ Upstream commit 8cb3b9c3642c0263d48f31d525bcee7170eedc20 ]

The "pvc" struct has a hole after pvc.sap_family which is not cleared.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoatl1c: use custom skb allocator
Eric Dumazet [Mon, 29 Jul 2013 17:24:04 +0000]
atl1c: use custom skb allocator

[ Upstream commit 7b70176421993866e616f1cbc4d0dd4054f1bf78 ]

We had reports ( https://bugzilla.kernel.org/show_bug.cgi?id=54021 )
that using high order pages for skb allocations is problematic for atl1c

We do not know exactly what the problem is, but we suspect that crossing
4K pages is not well supported by this hardware.

Use a custom allocator, using page allocator and 2K fragments for
optimal stack behavior. We might make this allocator generic
in future kernels.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Luis Henriques <luis.henriques@canonical.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoaf_key: more info leaks in pfkey messages
Dan Carpenter [Sun, 28 Jul 2013 20:04:45 +0000]
af_key: more info leaks in pfkey messages

[ Upstream commit ff862a4668dd6dba962b1d2d8bd344afa6375683 ]

This is inspired by a5cc68f3d6 "af_key: fix info leaks in notify
messages".  There are some struct members which don't get initialized
and could disclose small amounts of private information.

Acked-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agonet_sched: Fix stack info leak in cbq_dump_wrr().
David S. Miller [Tue, 30 Jul 2013 07:16:21 +0000]
net_sched: Fix stack info leak in cbq_dump_wrr().

[ Upstream commit a0db856a95a29efb1c23db55c02d9f0ff4f0db48 ]

Make sure the reserved fields, and padding (if any), are
fully initialized.

Based upon a patch by Dan Carpenter and feedback from
Joe Perches.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agogenetlink: release cb_lock before requesting additional module
Stanislaw Gruszka [Fri, 26 Jul 2013 09:00:10 +0000]
genetlink: release cb_lock before requesting additional module

[ Upstream commit c74f2b2678f40b80265dd53556f1f778c8e1823f ]

Requesting external module with cb_lock taken can result in
the deadlock like showed below:

[ 2458.111347] Showing all locks held in the system:
[ 2458.111347] 1 lock held by NetworkManager/582:
[ 2458.111347]  #0:  (cb_lock){++++++}, at: [<ffffffff8162bc79>] genl_rcv+0x19/0x40
[ 2458.111347] 1 lock held by modprobe/603:
[ 2458.111347]  #0:  (cb_lock){++++++}, at: [<ffffffff8162baa5>] genl_lock_all+0x15/0x30

[ 2461.579457] SysRq : Show Blocked State
[ 2461.580103]   task                        PC stack   pid father
[ 2461.580103] NetworkManager  D ffff880034b84500  4040   582      1 0x00000080
[ 2461.580103]  ffff8800197ff720 0000000000000046 00000000001d5340 ffff8800197fffd8
[ 2461.580103]  ffff8800197fffd8 00000000001d5340 ffff880019631700 7fffffffffffffff
[ 2461.580103]  ffff8800197ff880 ffff8800197ff878 ffff880019631700 ffff880019631700
[ 2461.580103] Call Trace:
[ 2461.580103]  [<ffffffff817355f9>] schedule+0x29/0x70
[ 2461.580103]  [<ffffffff81731ad1>] schedule_timeout+0x1c1/0x360
[ 2461.580103]  [<ffffffff810e69eb>] ? mark_held_locks+0xbb/0x140
[ 2461.580103]  [<ffffffff817377ac>] ? _raw_spin_unlock_irq+0x2c/0x50
[ 2461.580103]  [<ffffffff810e6b6d>] ? trace_hardirqs_on_caller+0xfd/0x1c0
[ 2461.580103]  [<ffffffff81736398>] wait_for_completion_killable+0xe8/0x170
[ 2461.580103]  [<ffffffff810b7fa0>] ? wake_up_state+0x20/0x20
[ 2461.580103]  [<ffffffff81095825>] call_usermodehelper_exec+0x1a5/0x210
[ 2461.580103]  [<ffffffff817362ed>] ? wait_for_completion_killable+0x3d/0x170
[ 2461.580103]  [<ffffffff81095cc3>] __request_module+0x1b3/0x370
[ 2461.580103]  [<ffffffff810e6b6d>] ? trace_hardirqs_on_caller+0xfd/0x1c0
[ 2461.580103]  [<ffffffff8162c5c9>] ctrl_getfamily+0x159/0x190
[ 2461.580103]  [<ffffffff8162d8a4>] genl_family_rcv_msg+0x1f4/0x2e0
[ 2461.580103]  [<ffffffff8162d990>] ? genl_family_rcv_msg+0x2e0/0x2e0
[ 2461.580103]  [<ffffffff8162da1e>] genl_rcv_msg+0x8e/0xd0
[ 2461.580103]  [<ffffffff8162b729>] netlink_rcv_skb+0xa9/0xc0
[ 2461.580103]  [<ffffffff8162bc88>] genl_rcv+0x28/0x40
[ 2461.580103]  [<ffffffff8162ad6d>] netlink_unicast+0xdd/0x190
[ 2461.580103]  [<ffffffff8162b149>] netlink_sendmsg+0x329/0x750
[ 2461.580103]  [<ffffffff815db849>] sock_sendmsg+0x99/0xd0
[ 2461.580103]  [<ffffffff810bb58f>] ? local_clock+0x5f/0x70
[ 2461.580103]  [<ffffffff810e96e8>] ? lock_release_non_nested+0x308/0x350
[ 2461.580103]  [<ffffffff815dbc6e>] ___sys_sendmsg+0x39e/0x3b0
[ 2461.580103]  [<ffffffff810565af>] ? kvm_clock_read+0x2f/0x50
[ 2461.580103]  [<ffffffff810218b9>] ? sched_clock+0x9/0x10
[ 2461.580103]  [<ffffffff810bb2bd>] ? sched_clock_local+0x1d/0x80
[ 2461.580103]  [<ffffffff810bb448>] ? sched_clock_cpu+0xa8/0x100
[ 2461.580103]  [<ffffffff810e33ad>] ? trace_hardirqs_off+0xd/0x10
[ 2461.580103]  [<ffffffff810bb58f>] ? local_clock+0x5f/0x70
[ 2461.580103]  [<ffffffff810e3f7f>] ? lock_release_holdtime.part.28+0xf/0x1a0
[ 2461.580103]  [<ffffffff8120fec9>] ? fget_light+0xf9/0x510
[ 2461.580103]  [<ffffffff8120fe0c>] ? fget_light+0x3c/0x510
[ 2461.580103]  [<ffffffff815dd1d2>] __sys_sendmsg+0x42/0x80
[ 2461.580103]  [<ffffffff815dd222>] SyS_sendmsg+0x12/0x20
[ 2461.580103]  [<ffffffff81741ad9>] system_call_fastpath+0x16/0x1b
[ 2461.580103] modprobe        D ffff88000f2c8000  4632   603    602 0x00000080
[ 2461.580103]  ffff88000f04fba8 0000000000000046 00000000001d5340 ffff88000f04ffd8
[ 2461.580103]  ffff88000f04ffd8 00000000001d5340 ffff8800377d4500 ffff8800377d4500
[ 2461.580103]  ffffffff81d0b260 ffffffff81d0b268 ffffffff00000000 ffffffff81d0b2b0
[ 2461.580103] Call Trace:
[ 2461.580103]  [<ffffffff817355f9>] schedule+0x29/0x70
[ 2461.580103]  [<ffffffff81736d4d>] rwsem_down_write_failed+0xed/0x1a0
[ 2461.580103]  [<ffffffff810bb200>] ? update_cpu_load_active+0x10/0xb0
[ 2461.580103]  [<ffffffff8137b473>] call_rwsem_down_write_failed+0x13/0x20
[ 2461.580103]  [<ffffffff8173492d>] ? down_write+0x9d/0xb2
[ 2461.580103]  [<ffffffff8162baa5>] ? genl_lock_all+0x15/0x30
[ 2461.580103]  [<ffffffff8162baa5>] genl_lock_all+0x15/0x30
[ 2461.580103]  [<ffffffff8162cbb3>] genl_register_family+0x53/0x1f0
[ 2461.580103]  [<ffffffffa01dc000>] ? 0xffffffffa01dbfff
[ 2461.580103]  [<ffffffff8162d650>] genl_register_family_with_ops+0x20/0x80
[ 2461.580103]  [<ffffffffa01dc000>] ? 0xffffffffa01dbfff
[ 2461.580103]  [<ffffffffa017fe84>] nl80211_init+0x24/0xf0 [cfg80211]
[ 2461.580103]  [<ffffffffa01dc000>] ? 0xffffffffa01dbfff
[ 2461.580103]  [<ffffffffa01dc043>] cfg80211_init+0x43/0xdb [cfg80211]
[ 2461.580103]  [<ffffffff810020fa>] do_one_initcall+0xfa/0x1b0
[ 2461.580103]  [<ffffffff8105cb93>] ? set_memory_nx+0x43/0x50
[ 2461.580103]  [<ffffffff810f75af>] load_module+0x1c6f/0x27f0
[ 2461.580103]  [<ffffffff810f2c90>] ? store_uevent+0x40/0x40
[ 2461.580103]  [<ffffffff810f82c6>] SyS_finit_module+0x86/0xb0
[ 2461.580103]  [<ffffffff81741ad9>] system_call_fastpath+0x16/0x1b
[ 2461.580103] Sched Debug Version: v0.10, 3.11.0-0.rc1.git4.1.fc20.x86_64 #1

Problem start to happen after adding net-pf-16-proto-16-family-nl80211
alias name to cfg80211 module by below commit (though that commit
itself is perfectly fine):

commit fb4e156886ce6e8309e912d8b370d192330d19d3
Author: Marcel Holtmann <marcel@holtmann.org>
Date:   Sun Apr 28 16:22:06 2013 -0700

    nl80211: Add generic netlink module alias for cfg80211/nl80211

Reported-and-tested-by: Jeff Layton <jlayton@redhat.com>
Reported-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Reviewed-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agousbnet: do not pretend to support SG/TSO
Eric Dumazet [Wed, 24 Jul 2013 00:15:54 +0000]
usbnet: do not pretend to support SG/TSO

[ Upstream commit 20f0170377264e8449b6987041f0bcc4d746d3ed ]

usbnet doesn't support yet SG, so drivers should not advertise SG or TSO
capabilities, as they allow TCP stack to build large TSO packets that
need to be linearized and might use order-5 pages.

This adds an extra copy overhead and possible allocation failures.

Current code ignore skb_linearize() return code so crashes are even
possible.

Best is to not pretend SG/TSO is supported, and add this again when/if
usbnet really supports SG for devices who could get a performance gain.

Based on a prior patch from Freddy Xin <freddy@asix.com.tw>

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoipv6: take rtnl_lock and mark mrt6 table as freed on namespace cleanup
Hannes Frederic Sowa [Mon, 22 Jul 2013 21:45:53 +0000]
ipv6: take rtnl_lock and mark mrt6 table as freed on namespace cleanup

[ Upstream commit 905a6f96a1b18e490a75f810d733ced93c39b0e5 ]

Otherwise we end up dereferencing the already freed net->ipv6.mrt pointer
which leads to a panic (from Srivatsa S. Bhat):

BUG: unable to handle kernel paging request at ffff882018552020
IP: [<ffffffffa0366b02>] ip6mr_sk_done+0x32/0xb0 [ipv6]
PGD 290a067 PUD 207ffe0067 PMD 207ff1d067 PTE 8000002018552060
Oops: 0000 [#1] SMP DEBUG_PAGEALLOC
Modules linked in: ebtable_nat ebtables nfs fscache nf_conntrack_ipv4 nf_defrag_ipv4 ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables nfsd lockd nfs_acl exportfs auth_rpcgss autofs4 sunrpc 8021q garp bridge stp llc ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter
+ip6_tables ipv6 vfat fat vhost_net macvtap macvlan vhost tun kvm_intel kvm uinput iTCO_wdt iTCO_vendor_support cdc_ether usbnet mii microcode i2c_i801 i2c_core lpc_ich mfd_core shpchp ioatdma dca mlx4_core be2net wmi acpi_cpufreq mperf ext4 jbd2 mbcache dm_mirror dm_region_hash dm_log dm_mod
CPU: 0 PID: 7 Comm: kworker/u33:0 Not tainted 3.11.0-rc1-ea45e-a #4
Hardware name: IBM  -[8737R2A]-/00Y2738, BIOS -[B2E120RUS-1.20]- 11/30/2012
Workqueue: netns cleanup_net
task: ffff8810393641c0 ti: ffff881039366000 task.ti: ffff881039366000
RIP: 0010:[<ffffffffa0366b02>]  [<ffffffffa0366b02>] ip6mr_sk_done+0x32/0xb0 [ipv6]
RSP: 0018:ffff881039367bd8  EFLAGS: 00010286
RAX: ffff881039367fd8 RBX: ffff882018552000 RCX: dead000000200200
RDX: 0000000000000000 RSI: ffff881039367b68 RDI: ffff881039367b68
RBP: ffff881039367bf8 R08: ffff881039367b68 R09: 2222222222222222
R10: 2222222222222222 R11: 2222222222222222 R12: ffff882015a7a040
R13: ffff882014eb89c0 R14: ffff8820289e2800 R15: 0000000000000000
FS:  0000000000000000(0000) GS:ffff88103fc00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffff882018552020 CR3: 0000000001c0b000 CR4: 00000000000407f0
Stack:
 ffff881039367c18 ffff882014eb89c0 ffff882015e28c00 0000000000000000
 ffff881039367c18 ffffffffa034d9d1 ffff8820289e2800 ffff882014eb89c0
 ffff881039367c58 ffffffff815bdecb ffffffff815bddf2 ffff882014eb89c0
Call Trace:
 [<ffffffffa034d9d1>] rawv6_close+0x21/0x40 [ipv6]
 [<ffffffff815bdecb>] inet_release+0xfb/0x220
 [<ffffffff815bddf2>] ? inet_release+0x22/0x220
 [<ffffffffa032686f>] inet6_release+0x3f/0x50 [ipv6]
 [<ffffffff8151c1d9>] sock_release+0x29/0xa0
 [<ffffffff81525520>] sk_release_kernel+0x30/0x70
 [<ffffffffa034f14b>] icmpv6_sk_exit+0x3b/0x80 [ipv6]
 [<ffffffff8152fff9>] ops_exit_list+0x39/0x60
 [<ffffffff815306fb>] cleanup_net+0xfb/0x1a0
 [<ffffffff81075e3a>] process_one_work+0x1da/0x610
 [<ffffffff81075dc9>] ? process_one_work+0x169/0x610
 [<ffffffff81076390>] worker_thread+0x120/0x3a0
 [<ffffffff81076270>] ? process_one_work+0x610/0x610
 [<ffffffff8107da2e>] kthread+0xee/0x100
 [<ffffffff8107d940>] ? __init_kthread_worker+0x70/0x70
 [<ffffffff8162a99c>] ret_from_fork+0x7c/0xb0
 [<ffffffff8107d940>] ? __init_kthread_worker+0x70/0x70
Code: 20 48 89 5d e8 4c 89 65 f0 4c 89 6d f8 66 66 66 66 90 4c 8b 67 30 49 89 fd e8 db 3c 1e e1 49 8b 9c 24 90 08 00 00 48 85 db 74 06 <4c> 39 6b 20 74 20 bb f3 ff ff ff e8 8e 3c 1e e1 89 d8 4c 8b 65
RIP  [<ffffffffa0366b02>] ip6mr_sk_done+0x32/0xb0 [ipv6]
 RSP <ffff881039367bd8>
CR2: ffff882018552020

Reported-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Tested-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agosfc: Enable RX scatter for flows steered by RFS
Ben Hutchings [Mon, 22 Jul 2013 23:17:25 +0000]
sfc: Enable RX scatter for flows steered by RFS

[ Upstream commit 7aa0076c497d6f0d5d957b431d0d80e1e9780274 ]

Received packets are only scattered if this is enabled in both the
matching filter and the receiving queue.  This was not being done for
filters inserted for RFS, so any packet requiring more than a single
descriptor was dropped.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agosysctl net: Keep tcp_syn_retries inside the boundary
Michal Tesar [Fri, 19 Jul 2013 12:09:01 +0000]
sysctl net: Keep tcp_syn_retries inside the boundary

[ Upstream commit 651e92716aaae60fc41b9652f54cb6803896e0da ]

Limit the min/max value passed to the
/proc/sys/net/ipv4/tcp_syn_retries.

Signed-off-by: Michal Tesar <mtesar@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoarcnet: cleanup sizeof parameter
Dan Carpenter [Fri, 19 Jul 2013 05:48:05 +0000]
arcnet: cleanup sizeof parameter

[ Upstream commit 087d273caf4f7d3f2159256f255f1f432bc84a5b ]

This patch doesn't change the compiled code because ARC_HDR_SIZE is 4
and sizeof(int) is 4, but the intent was to use the header size and not
the sizeof the header size.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agospi: spi-davinci: Fix direction in dma_map_single()
Christian Eggers [Mon, 29 Jul 2013 18:54:09 +0000]
spi: spi-davinci: Fix direction in dma_map_single()

commit 89c66ee890af18500fa4598db300cc07c267f900 upstream.

Commit 048177ce3b3962852fd34a7e04938959271c7e70 (spi: spi-davinci:
convert to DMA engine API) introduced a regression: dma_map_single()
is called with direction DMA_FROM_DEVICE for rx and for tx.

Signed-off-by: Christian Eggers <ceggers@gmx.de>
Acked-by: Matt Porter <mporter@ti.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agox86/iommu/vt-d: Expand interrupt remapping quirk to cover x58 chipset
Neil Horman [Wed, 17 Jul 2013 11:13:59 +0000]
x86/iommu/vt-d: Expand interrupt remapping quirk to cover x58 chipset

commit 803075dba31c17af110e1d9a915fe7262165b213 upstream.

Recently we added an early quirk to detect 5500/5520 chipsets
with early revisions that had problems with irq draining with
interrupt remapping enabled:

  commit 03bbcb2e7e292838bb0244f5a7816d194c911d62
  Author: Neil Horman <nhorman@tuxdriver.com>
  Date:   Tue Apr 16 16:38:32 2013 -0400

      iommu/vt-d: add quirk for broken interrupt remapping on 55XX chipsets

It turns out this same problem is present in the intel X58
chipset as well. See errata 69 here:

  http://www.intel.com/content/www/us/en/chipsets/x58-express-specification-update.html

This patch extends the pci early quirk so that the chip
devices/revisions specified in the above update are also covered
in the same way:

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Donald Dutile <ddutile@redhat.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Malcolm Crossley <malcolm.crossley@citrix.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Don Zickus <dzickus@redhat.com>
Link: http://lkml.kernel.org/r/1374059639-8631-1-git-send-email-nhorman@tuxdriver.com
[ Small edits. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agouserns: limit the maximum depth of user_namespace->parent chain
Oleg Nesterov [Thu, 8 Aug 2013 16:55:32 +0000]
userns: limit the maximum depth of user_namespace->parent chain

commit 8742f229b635bf1c1c84a3dfe5e47c814c20b5c8 upstream.

Ensure that user_namespace->parent chain can't grow too much.
Currently we use the hardroded 32 as limit.

Reported-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agouserns: unshare_userns(&cred) should not populate cred on failure
Oleg Nesterov [Tue, 6 Aug 2013 17:38:55 +0000]
userns: unshare_userns(&cred) should not populate cred on failure

commit 6160968cee8b90a5dd95318d716e31d7775c4ef3 upstream.

unshare_userns(new_cred) does *new_cred = prepare_creds() before
create_user_ns() which can fail. However, the caller expects that
it doesn't need to take care of new_cred if unshare_userns() fails.

We could change the single caller, sys_unshare(), but I think it
would be more clean to avoid the side effects on failure, so with
this patch unshare_userns() does put_cred() itself and initializes
*new_cred only if create_user_ns() succeeeds.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoworkqueue: copy workqueue_attrs with all fields
Shaohua Li [Thu, 1 Aug 2013 01:56:36 +0000]
workqueue: copy workqueue_attrs with all fields

commit 2865a8fb44cc32420407362cbda80c10fa09c6b2 upstream.

 $echo '0' > /sys/bus/workqueue/devices/xxx/numa
 $cat /sys/bus/workqueue/devices/xxx/numa

I got 1. It should be 0, the reason is copy_workqueue_attrs() called
in apply_workqueue_attrs() doesn't copy no_numa field.

Fix it by making copy_workqueue_attrs() copy ->no_numa too.  This
would also make get_unbound_pool() set a pool's ->no_numa attribute
according to the workqueue attributes used when the pool was created.
While harmelss, as ->no_numa isn't a pool attribute, this is a bit
confusing.  Clear it explicitly.

tj: Updated description and comments a bit.

Signed-off-by: Shaohua Li <shli@fusionio.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agos390/bitops: fix find_next_bit_left
Martin Schwidefsky [Thu, 25 Jul 2013 08:18:17 +0000]
s390/bitops: fix find_next_bit_left

commit 3b0040a47ad63f7147e9e7d2febb61a3b564bb90 upstream.

The find_next_bit_left function is broken if used with an offset which
is not a multiple of 64. The shift to mask the bits of a 64-bit word
not to search is in the wrong direction, the result can be either a
bit found smaller than the offset or failure to find a set bit.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agos390: add support for IBM zBC12 machine
Heiko Carstens [Wed, 24 Jul 2013 08:35:33 +0000]
s390: add support for IBM zBC12 machine

commit 594712276e737961d30e11eae80d403b2b3815df upstream.

Just add the new model number where appropiate.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agodrm/i915: make SDVO TV-out work for multifunction devices
Daniel Vetter [Tue, 30 Apr 2013 12:01:45 +0000]
drm/i915: make SDVO TV-out work for multifunction devices

commit 09ede5414f0215461c933032630bf9c3a61a8ba3 upstream.

We need to track this correctly. While at it shovel the boolean
to track whether the sdvo is in tv mode or not into pipe_config.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=36997
Tested-by: Pierre Assal <pierre.assal@verint.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=63609
Tested-by: cancan,feng <cancan.feng@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoBtrfs: fix crash regarding to ulist_add_merge
Liu Bo [Fri, 28 Jun 2013 04:37:45 +0000]
Btrfs: fix crash regarding to ulist_add_merge

commit 35f0399db6658f465b00893bdd13b992a0acfef0 upstream.

Several users reported this crash of NULL pointer or general protection,
the story is that we add a rbtree for speedup ulist iteration, and we
use krealloc() to address ulist growth, and krealloc() use memcpy to copy
old data to new memory area, so it's OK for an array as it doesn't use
pointers while it's not OK for a rbtree as it uses pointers.

So krealloc() will mess up our rbtree and it ends up with crash.

Reviewed-by: Wang Shilong <wangsl-fnst@cn.fujitsu.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Cc: BJ Quinn <bj@placs.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agox86, fpu: correct the asm constraints for fxsave, unbreak mxcsr.daz
H.J. Lu [Fri, 26 Jul 2013 16:11:56 +0000]
x86, fpu: correct the asm constraints for fxsave, unbreak mxcsr.daz

commit eaa5a990191d204ba0f9d35dbe5505ec2cdd1460 upstream.

GCC will optimize mxcsr_feature_mask_init in arch/x86/kernel/i387.c:

memset(&fx_scratch, 0, sizeof(struct i387_fxsave_struct));
asm volatile("fxsave %0" : : "m" (fx_scratch));
mask = fx_scratch.mxcsr_mask;
if (mask == 0)
mask = 0x0000ffbf;

to

memset(&fx_scratch, 0, sizeof(struct i387_fxsave_struct));
asm volatile("fxsave %0" : : "m" (fx_scratch));
mask = 0x0000ffbf;

since asm statement doesn’t say it will update fx_scratch.  As the
result, the DAZ bit will be cleared.  This patch fixes it. This bug
dates back to at least kernel 2.6.12.

Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agodrm/radeon: never unpin UVD bo v3
Christian König [Fri, 12 Jul 2013 14:18:09 +0000]
drm/radeon: never unpin UVD bo v3

commit 9cc2e0e9f13315559c85c9f99f141e420967c955 upstream.

Changing the UVD BOs offset on suspend/resume doesn't work because the VCPU
internally keeps pointers to it. Just keep it always pinned and save the
content manually.

Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=66425

v2: fix compiler warning
v3: fix CIK support
v4: rebased for 3.10-stable tree

Note: a version of this patch needs to go to stable.

Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agocgroup: fix umount vs cgroup_cfts_commit() race
Li Zefan [Tue, 18 Jun 2013 10:40:19 +0000]
cgroup: fix umount vs cgroup_cfts_commit() race

commit 084457f284abf6789d90509ee11dae383842b23b upstream.

cgroup_cfts_commit() uses dget() to keep cgroup alive after cgroup_mutex
is dropped, but dget() won't prevent cgroupfs from being umounted. When
the race happens, vfs will see some dentries with non-zero refcnt while
umount is in process.

Keep running this:
  mount -t cgroup -o blkio xxx /cgroup
  umount /cgroup

And this:
  modprobe cfq-iosched
  rmmod cfs-iosched

After a while, the BUG() in shrink_dcache_for_umount_subtree() may
be triggered:

  BUG: Dentry xxx{i=0,n=blkio.yyy} still in use (1) [umount of cgroup cgroup]

Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agofanotify: info leak in copy_event_to_user()
Dan Carpenter [Mon, 8 Jul 2013 22:59:40 +0000]
fanotify: info leak in copy_event_to_user()

commit de1e0c40aceb9d5bff09c3a3b97b2f1b178af53f upstream.

The ->reserved field isn't cleared so we leak one byte of stack
information to userspace.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Eric Paris <eparis@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis Henriques <luis.henriques@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agodrm/i915: Preserve the DDI_A_4_LANES bit from the bios
Stéphane Marchesin [Fri, 12 Jul 2013 20:54:41 +0000]
drm/i915: Preserve the DDI_A_4_LANES bit from the bios

commit bcf53de4e60d9000b82f541d654529e2902a4c2c upstream.

Otherwise the DDI_A_4_LANES bit gets lost and we can't use > 2 lanes
on eDP. This fixes eDP on hsw with > 2 lanes.

Also s/port_reversal/saved_port_bits/ since the current name is
confusing.

Signed-off-by: Stéphane Marchesin <marcheu@chromium.org>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Zhouping Liu <zliu@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoxen-blkfront: use a different scatterlist for each request
Roger Pau Monne [Thu, 2 May 2013 08:58:50 +0000]
xen-blkfront: use a different scatterlist for each request

commit b7649158a0d241f8d53d13ff7441858539e16656 upstream.

In blkif_queue_request blkfront iterates over the scatterlist in order
to set the segments of the request, and in blkif_completion blkfront
iterates over the raw request, which makes it hard to know the exact
position of the source and destination memory positions.

This can be solved by allocating a scatterlist for each request, that
will be keep until the request is finished, allowing us to copy the
data back to the original memory without having to iterate over the
raw request.

Oracle-Bug: 16660413 - LARGE ASYNCHRONOUS READS APPEAR BROKEN ON 2.6.39-400
CC: stable@vger.kernel.org
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reported-and-Tested-by: Anne Milicia <anne.milicia@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agodrm/radeon: Disable dma rings for bo moves on r6xx
Alex Deucher [Thu, 11 Jul 2013 18:20:11 +0000]
drm/radeon: Disable dma rings for bo moves on r6xx

commit aeea40cbf9388fc829e66fa049f64d97fd72e118 upstream.

They still seem to cause instability on some r6xx parts.
As a follow up, we can switch to using CP DMA for bo
moves on r6xx as a lighter weight alternative to using
the 3D engine.

A version of this patch should also go to stable kernels.

Tested-by: J.N. <golden.fleeced@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoPCI: Retry allocation of only the resource type that failed
Yinghai Lu [Thu, 25 Jul 2013 13:31:38 +0000]
PCI: Retry allocation of only the resource type that failed

commit aa914f5ec25e4371ba18b312971314be1b9b1076 upstream.

Ben Herrenschmidt reported the following problem:

  - The bus has space for all desired MMIO resources, including optional
    space for SR-IOV devices
  - We attempt to allocate I/O port space, but it fails because the bus
    has no I/O space
  - Because of the I/O allocation failure, we retry MMIO allocation,
    requesting only the required space, without the optional SR-IOV space

This means we don't allocate the optional SR-IOV space, even though we
could.

This is related to 0c5be0cb0e ("PCI: Retry on IORESOURCE_IO type
allocations").

This patch changes how we handle allocation failures.  We will now retry
allocation of only the resource type that failed.  If MMIO allocation
fails, we'll retry only MMIO allocation.  If I/O port allocation fails,
we'll retry only I/O port allocation.

[bhelgaas: changelog]
Reference: https://lkml.kernel.org/r/1367712653.11982.19.camel@pasglop
Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Tested-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoPCI: pciehp: Fix null pointer deref when hot-removing SR-IOV device
Yinghai Lu [Fri, 19 Jul 2013 19:14:16 +0000]
PCI: pciehp: Fix null pointer deref when hot-removing SR-IOV device

commit 29ed1f29b68a8395d5679b3c4e38352b617b3236 upstream.

Hot-removing a device with SR-IOV enabled causes a null pointer dereference
in v3.9 and v3.10.

This is a regression caused by ba518e3c17 ("PCI: pciehp: Iterate over all
devices in slot, not functions 0-7").  When we iterate over the
bus->devices list, we first remove the PF, which also removes all the VFs
from the list.  Then the list iterator blows up because more than just the
current entry was removed from the list.

ac205b7bb7 ("PCI: make sriov work with hotplug remove") works around a
similar problem in pci_stop_bus_devices() by iterating over the list in
reverse, so the VFs are stopped and removed from the list first, before the
PF.

This patch changes pciehp_unconfigure_device() to iterate over the list in
reverse, too.

[bhelgaas: bugzilla, changelog]
Reference: https://bugzilla.kernel.org/show_bug.cgi?id=60604
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoRevert "cpuidle: Quickly notice prediction failure for repeat mode"
Rafael J. Wysocki [Fri, 26 Jul 2013 23:41:34 +0000]
Revert "cpuidle: Quickly notice prediction failure for repeat mode"

commit 148519120c6d1f19ad53349683aeae9f228b0b8d upstream.

Revert commit 69a37bea (cpuidle: Quickly notice prediction failure for
repeat mode), because it has been identified as the source of a
significant performance regression in v3.8 and later as explained by
Jeremy Eder:

  We believe we've identified a particular commit to the cpuidle code
  that seems to be impacting performance of variety of workloads.
  The simplest way to reproduce is using netperf TCP_RR test, so
  we're using that, on a pair of Sandy Bridge based servers.  We also
  have data from a large database setup where performance is also
  measurably/positively impacted, though that test data isn't easily
  share-able.

  Included below are test results from 3 test kernels:

  kernel       reverts
  -----------------------------------------------------------
  1) vanilla   upstream (no reverts)

  2) perfteam2 reverts e11538d1f03914eb92af5a1a378375c05ae8520c

  3) test      reverts 69a37beabf1f0a6705c08e879bdd5d82ff6486c4
                       e11538d1f03914eb92af5a1a378375c05ae8520c

  In summary, netperf TCP_RR numbers improve by approximately 4%
  after reverting 69a37beabf1f0a6705c08e879bdd5d82ff6486c4.  When
  69a37beabf1f0a6705c08e879bdd5d82ff6486c4 is included, C0 residency
  never seems to get above 40%.  Taking that patch out gets C0 near
  100% quite often, and performance increases.

  The below data are histograms representing the %c0 residency @
  1-second sample rates (using turbostat), while under netperf test.

  - If you look at the first 4 histograms, you can see %c0 residency
    almost entirely in the 30,40% bin.
  - The last pair, which reverts 69a37beabf1f0a6705c08e879bdd5d82ff6486c4,
    shows %c0 in the 80,90,100% bins.

  Below each kernel name are netperf TCP_RR trans/s numbers for the
  particular kernel that can be disclosed publicly, comparing the 3
  test kernels.  We ran a 4th test with the vanilla kernel where
  we've also set /dev/cpu_dma_latency=0 to show overall impact
  boosting single-threaded TCP_RR performance over 11% above
  baseline.

  3.10-rc2 vanilla RX + c0 lock (/dev/cpu_dma_latency=0):
  TCP_RR trans/s 54323.78

  -----------------------------------------------------------
  3.10-rc2 vanilla RX (no reverts)
  TCP_RR trans/s 48192.47

  Receiver %c0
      0.0000 -    10.0000 [     1]: *
     10.0000 -    20.0000 [     0]:
     20.0000 -    30.0000 [     0]:
     30.0000 -    40.0000 [    59]:
  ***********************************************************
     40.0000 -    50.0000 [     1]: *
     50.0000 -    60.0000 [     0]:
     60.0000 -    70.0000 [     0]:
     70.0000 -    80.0000 [     0]:
     80.0000 -    90.0000 [     0]:
     90.0000 -   100.0000 [     0]:

  Sender %c0
      0.0000 -    10.0000 [     1]: *
     10.0000 -    20.0000 [     0]:
     20.0000 -    30.0000 [     0]:
     30.0000 -    40.0000 [    11]: ***********
     40.0000 -    50.0000 [    49]:
  *************************************************
     50.0000 -    60.0000 [     0]:
     60.0000 -    70.0000 [     0]:
     70.0000 -    80.0000 [     0]:
     80.0000 -    90.0000 [     0]:
     90.0000 -   100.0000 [     0]:

  -----------------------------------------------------------
  3.10-rc2 perfteam2 RX (reverts commit
  e11538d1f03914eb92af5a1a378375c05ae8520c)
  TCP_RR trans/s 49698.69

  Receiver %c0
      0.0000 -    10.0000 [     1]: *
     10.0000 -    20.0000 [     1]: *
     20.0000 -    30.0000 [     0]:
     30.0000 -    40.0000 [    59]:
  ***********************************************************
     40.0000 -    50.0000 [     0]:
     50.0000 -    60.0000 [     0]:
     60.0000 -    70.0000 [     0]:
     70.0000 -    80.0000 [     0]:
     80.0000 -    90.0000 [     0]:
     90.0000 -   100.0000 [     0]:

  Sender %c0
      0.0000 -    10.0000 [     1]: *
     10.0000 -    20.0000 [     0]:
     20.0000 -    30.0000 [     0]:
     30.0000 -    40.0000 [     2]: **
     40.0000 -    50.0000 [    58]:
  **********************************************************
     50.0000 -    60.0000 [     0]:
     60.0000 -    70.0000 [     0]:
     70.0000 -    80.0000 [     0]:
     80.0000 -    90.0000 [     0]:
     90.0000 -   100.0000 [     0]:

  -----------------------------------------------------------
  3.10-rc2 test RX (reverts 69a37beabf1f0a6705c08e879bdd5d82ff6486c4
  and e11538d1f03914eb92af5a1a378375c05ae8520c)
  TCP_RR trans/s 47766.95

  Receiver %c0
      0.0000 -    10.0000 [     1]: *
     10.0000 -    20.0000 [     1]: *
     20.0000 -    30.0000 [     0]:
     30.0000 -    40.0000 [    27]: ***************************
     40.0000 -    50.0000 [     2]: **
     50.0000 -    60.0000 [     0]:
     60.0000 -    70.0000 [     2]: **
     70.0000 -    80.0000 [     0]:
     80.0000 -    90.0000 [     0]:
     90.0000 -   100.0000 [    28]: ****************************

  Sender:
      0.0000 -    10.0000 [     1]: *
     10.0000 -    20.0000 [     0]:
     20.0000 -    30.0000 [     0]:
     30.0000 -    40.0000 [    11]: ***********
     40.0000 -    50.0000 [     0]:
     50.0000 -    60.0000 [     1]: *
     60.0000 -    70.0000 [     0]:
     70.0000 -    80.0000 [     3]: ***
     80.0000 -    90.0000 [     7]: *******
     90.0000 -   100.0000 [    38]: **************************************

  These results demonstrate gaining back the tendency of the CPU to
  stay in more responsive, performant C-states (and thus yield
  measurably better performance), by reverting commit
  69a37beabf1f0a6705c08e879bdd5d82ff6486c4.

Requested-by: Jeremy Eder <jeder@redhat.com>
Tested-by: Len Brown <len.brown@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agocpufreq: Fix cpufreq driver module refcount balance after suspend/resume
Rafael J. Wysocki [Mon, 29 Jul 2013 22:32:00 +0000]
cpufreq: Fix cpufreq driver module refcount balance after suspend/resume

commit 2a99859932281ed6c2ecdd988855f8f6838f6743 upstream.

Since cpufreq_cpu_put() called by __cpufreq_remove_dev() drops the
driver module refcount, __cpufreq_remove_dev() causes that refcount
to become negative for the cpufreq driver after a suspend/resume
cycle.

This is not the only bad thing that happens there, however, because
kobject_put() should only be called for the policy kobject at this
point if the CPU is not the last one for that policy.

Namely, if the given CPU is the last one for that policy, the
policy kobject's refcount should be 1 at this point, as set by
cpufreq_add_dev_interface(), and only needs to be dropped once for
the kobject to go away.  This actually happens under the cpu == 1
check, so it need not be done before by cpufreq_cpu_put().

On the other hand, if the given CPU is not the last one for that
policy, this means that cpufreq_add_policy_cpu() has been called
at least once for that policy and cpufreq_cpu_get() has been
called for it too.  To balance that cpufreq_cpu_get(), we need to
call cpufreq_cpu_put() in that case.

Thus, to fix the described problem and keep the reference
counters balanced in both cases, move the cpufreq_cpu_get() call
in __cpufreq_remove_dev() to the code path executed only for
CPUs that share the policy with other CPUs.

Reported-and-tested-by: Toralf Förster <toralf.foerster@gmx.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoRevert "cpuidle: Quickly notice prediction failure in general case"
Rafael J. Wysocki [Fri, 26 Jul 2013 23:13:26 +0000]
Revert "cpuidle: Quickly notice prediction failure in general case"

commit 228b30234f258a193317874854eee1ca7807186e upstream.

Revert commit e11538d1 (cpuidle: Quickly notice prediction failure in
general case), since it depends on commit 69a37be (cpuidle: Quickly
notice prediction failure for repeat mode) that has been identified
as the source of a significant performance regression in v3.8 and
later.

Requested-by: Jeremy Eder <jeder@redhat.com>
Tested-by: Len Brown <len.brown@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoACPI / battery: Fix parsing _BIX return value
Lan Tianyu [Tue, 30 Jul 2013 12:00:42 +0000]
ACPI / battery: Fix parsing _BIX return value

commit 016d5baad04269e8559332df05f89bd95b52d6ad upstream.

The _BIX method returns extended battery info as a package.
According the ACPI spec (ACPI 5, Section 10.2.2.2), the first member
of that package should be "Revision".  However, the current ACPI
battery driver treats the first member as "Power Unit" which should
be the second member.  This causes the result of _BIX return data
parsing to be incorrect.

Fix this by adding a new member called 'revision' to struct
acpi_battery and adding the offsetof() information on it to
extended_info_offsets[] as the first row.

[rjw: Changelog]
Reported-and-tested-by: Jan Hoffmann <jan.christian.hoffmann@gmail.com>
References: http://bugzilla.kernel.org/show_bug.cgi?id=60519
Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agozram: protect sysfs handler from invalid memory access
Jiang Liu [Thu, 6 Jun 2013 16:07:27 +0000]
zram: protect sysfs handler from invalid memory access

commit 5863e10b441e7ea4b492f930f1be180a97d026f3 upstream.

Use zram->init_lock to protect access to zram->meta, otherwise it
may cause invalid memory access if zram->meta has been freed by
zram_reset_device().

This issue may be triggered by:
Thread 1:
while true; do cat mem_used_total; done
Thread 2:
while true; do echo 8M > disksize; echo 1 > reset; done

Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agozram: avoid access beyond the zram device
Jiang Liu [Thu, 6 Jun 2013 16:07:26 +0000]
zram: avoid access beyond the zram device

commit 12a7ad3b810e77137d0caf97a6dd97591e075b30 upstream.

Function valid_io_request() should verify the entire request are within
the zram device address range. Otherwise it may cause invalid memory
access when accessing/modifying zram->meta->table[index] because the
'index' is out of range. Then it may access non-exist memory, randomly
modify memory belong to other subsystems, which is hard to track down.

Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agozram: avoid double free in function zram_bvec_write()
Jiang Liu [Thu, 6 Jun 2013 16:07:25 +0000]
zram: avoid double free in function zram_bvec_write()

commit 65c484609a3b25c35e4edcd5f2c38f98f5226093 upstream.

When doing a patial write and the whole page is filled with zero,
zram_bvec_write() will free uncmem twice.

Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agozram: destroy all devices on error recovery path in zram_init()
Jiang Liu [Thu, 6 Jun 2013 16:07:24 +0000]
zram: destroy all devices on error recovery path in zram_init()

commit 39a9b8ac9333e4268ecff7da6c9d1ab3823ff243 upstream.

On error recovery path of zram_init(), it leaks the zram device object
causing the failure. So change create_device() to free allocated
resources on error path.

Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Jerome Marchand <jmarchan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agozram: use zram->lock to protect zram_free_page() in swap free notify path
Jiang Liu [Thu, 6 Jun 2013 16:07:23 +0000]
zram: use zram->lock to protect zram_free_page() in swap free notify path

commit 57ab048532c0d975538cebd4456491b5c34248f4 upstream.

zram_slot_free_notify() is free-running without any protection from
concurrent operations. So there are race conditions between
zram_bvec_read()/zram_bvec_write() and zram_slot_free_notify(),
and possible consequences include:
1) Trigger BUG_ON(!handle) on zram_bvec_write() side.
2) Access to freed pages on zram_bvec_read() side.
3) Break some fields (bad_compress, good_compress, pages_stored)
   in zram->stats if the swap layer makes concurrently call to
   zram_slot_free_notify().

So enhance zram_slot_free_notify() to acquire writer lock on zram->lock
before calling zram_free_page().

Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agozram: avoid invalid memory access in zram_exit()
Jiang Liu [Thu, 6 Jun 2013 16:07:22 +0000]
zram: avoid invalid memory access in zram_exit()

commit 6030ea9b35971a4200062f010341ab832e878ac9 upstream.

Memory for zram->disk object may have already been freed after returning
from destroy_device(zram), then it's unsafe for zram_reset_device(zram)
to access zram->disk again.

We can't solve this bug by flipping the order of destroy_device(zram)
and zram_reset_device(zram), that will cause deadlock issues to the
zram sysfs handler.

So fix it by holding an extra reference to zram->disk before calling
destroy_device(zram).

Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agomwifiex: fix wrong data rates in P2P client
Avinash Patil [Mon, 29 Jul 2013 23:32:38 +0000]
mwifiex: fix wrong data rates in P2P client

commit 237b2ac8ac89a6b0120decdd05c7bf4637deb98a upstream.

This patch fixes an issue wherein adhoc rates were being copied
into association request from P2P client.

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Stone Piao <piaoyun@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agomwifiex: check for bss_role instead of bss_mode for STA operations
Avinash Patil [Mon, 29 Jul 2013 23:32:37 +0000]
mwifiex: check for bss_role instead of bss_mode for STA operations

commit 953b3539ef9301b8ef73f4b6e2fd824b86aae65a upstream.

This patch fixes an issue wherein association would fail on P2P
interfaces. This happened because we are checking priv->mode
against NL80211_IFTYPE_STATION. While this check is correct for
infrastructure stations, it would fail P2P clients for which mode
is NL80211_IFTYPE_P2P_CLIENT.

Better check would be bss_role which has only 2 values: STA/AP.

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Stone Piao <piaoyun@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agomwifiex: Add missing endian conversion.
Tomasz Moń [Tue, 23 Jul 2013 05:42:49 +0000]
mwifiex: Add missing endian conversion.

commit 83e612f632c3897be29ef02e0472f6d63e258378 upstream.

Both type and pkt_len variables are in host endian and these should be in
Little Endian in the payload.

Signed-off-by: Tomasz Moń <desowin@gmail.com>
Acked-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agort2x00: fix stop queue
Stanislaw Gruszka [Sun, 28 Jul 2013 11:17:22 +0000]
rt2x00: fix stop queue

commit e2288b66fe7ff0288382b2af671b4da558b44472 upstream.

Since we clear QUEUE_STARTED in rt2x00queue_stop_queue(), following
call to rt2x00queue_pause_queue() reduce to noop, i.e we do not
stop queue in mac80211.

To fix that introduce rt2x00queue_pause_queue_nocheck() function,
which will stop queue in mac80211 directly.

Note that rt2x00_start_queue() explicitly set QUEUE_PAUSED bit.

Note also that reordering operations i.e. first call to
rt2x00queue_pause_queue() and then clear QUEUE_STARTED bit, will race
with rt2x00queue_unpause_queue(), so calling ieee80211_stop_queue()
directly is the only available solution to fix the problem without
major rework.

Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agosvcrpc: fix kfree oops in gss-proxy code
J. Bruce Fields [Wed, 31 Jul 2013 18:11:14 +0000]
svcrpc: fix kfree oops in gss-proxy code

commit 743e217129f69aab074abe520a464fd0c6b1cca1 upstream.

mech_oid.data is an array, not kmalloc()'d memory.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agosvcrpc: fix gss_rpc_upcall create error
J. Bruce Fields [Mon, 10 Jun 2013 20:06:44 +0000]
svcrpc: fix gss_rpc_upcall create error

commit 9f96392b0ae6aefc02a9b900c3f4889dfafc8402 upstream.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agosvcrpc: fix gss-proxy xdr decoding oops
J. Bruce Fields [Fri, 7 Jun 2013 14:11:19 +0000]
svcrpc: fix gss-proxy xdr decoding oops

commit dc43376c26cef74226174a2394f37f2a3f8a8639 upstream.

Uninitialized stack data was being used as the destination for memcpy's.

Longer term we'll just delete some of this code; all we're doing is
skipping over xdr that we don't care about.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoBluetooth: fix wrong use of PTR_ERR() in btusb
Adam Lee [Wed, 10 Jul 2013 02:02:12 +0000]
Bluetooth: fix wrong use of PTR_ERR() in btusb

commit d9c78e9738ccd0017b10b8f44462aafb61904a4a upstream.

PTR_ERR() returns a signed long type value which is limited by IS_ERR(),
it must be a negative number whose range is [-MAX_ERRNO, 0).

The bug here returns negative numbers as error codes, then check it by
"if (ret < 0)", but -PTR_ERR() is actually positive. The wrong use here
leads to failure as below, even panic.

[   12.958920] Bluetooth: hci0 command 0xfc8e tx timeout
[   14.961765] Bluetooth: hci0 command 0xfc8e tx timeout
[   16.964688] Bluetooth: hci0 command 0xfc8e tx timeout
[   20.954501] Bluetooth: hci0 sending Intel patch command (0xfc8e) failed (-110)
[   22.957358] Bluetooth: hci0 command 0xfc8e tx timeout
[   30.948922] Bluetooth: hci0 sending Intel patch command (0xfc8e) failed (-110)
[   32.951780] Bluetooth: hci0 command 0xfc8e tx timeout
[   40.943359] Bluetooth: hci0 sending Intel patch command (0xfc8e) failed (-110)
[   42.946219] Bluetooth: hci0 command 0xfc8e tx timeout
[   50.937812] Bluetooth: hci0 sending Intel patch command (0xfc8e) failed (-110)
[   52.940670] Bluetooth: hci0 command 0xfc8e tx timeout
[   60.932236] Bluetooth: hci0 sending Intel patch command (0xfc8e) failed (-110)
[   62.935092] Bluetooth: hci0 command 0xfc8e tx timeout
[   70.926688] Bluetooth: hci0 sending Intel patch command (0xfc8e) failed (-110)
[   72.929545] Bluetooth: hci0 command 0xfc8e tx timeout
[   80.921111] Bluetooth: hci0 sending Intel patch command (0xfc8e) failed (-110)
[   82.923969] Bluetooth: hci0 command 0xfc2f tx timeout
[   90.915542] Bluetooth: hci0 sending Intel patch command (0xfc2f) failed (-110)
[   92.918406] Bluetooth: hci0 command 0xfc11 tx timeout
[  100.909955] Bluetooth: hci0 sending Intel patch command (0xfc11) failed (-110)
[  102.912858] Bluetooth: hci0 command 0xfc60 tx timeout
[  110.904394] Bluetooth: hci0 sending Intel patch command (0xfc60) failed (-110)
[  112.907293] Bluetooth: hci0 command 0xfc11 tx timeout
[  120.898831] Bluetooth: hci0 exiting Intel manufacturer mode failed (-110)
[  120.904757] bluetoothd[1030]: segfault at 4 ip 00007f8b2eb55236 sp 00007fff53ff6920 error 4 in bluetoothd[7f8b2eaff000+cb000]

Signed-off-by: Adam Lee <adam.lee@canonical.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoBluetooth: Add support for Mediatek Bluetooth device [0e8d:763f]
Cho, Yu-Chen [Tue, 4 Jun 2013 13:40:26 +0000]
Bluetooth: Add support for Mediatek Bluetooth device [0e8d:763f]

commit 178c059e7640aa8e50213400c6f3dde00189d979 upstream.

This patch adds support for Mediatek Bluetooth device

T:  Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#=  2 Spd=480  MxCh= 0
D:  Ver= 2.01 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0e8d ProdID=763f Rev= 1.00
S:  Manufacturer=MediaTek
S:  Product=BT
S:  SerialNumber=1.0
C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=450mA
A:  FirstIf#= 0 IfCount= 2 Cls=ff(vend.) Sub=ff Prot=ff
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=125us
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=125us
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:  If#= 1 Alt= 6 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=03(O) Atr=01(Isoc) MxPS=  63 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  63 Ivl=1ms

Signed-off-by: Cho, Yu-Chen <acho@suse.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoBluetooth: Add support for Atheros [0cf3:e003]
AceLan Kao [Thu, 20 Jun 2013 05:38:45 +0000]
Bluetooth: Add support for Atheros [0cf3:e003]

commit 1d5b569ef85d013a775560a90050dc630614c045 upstream.

Add support for the AR9462 chip

T:  Bus=02 Lev=02 Prnt=02 Port=04 Cnt=01 Dev#=  4 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0cf3 ProdID=e003 Rev=00.02
C:  #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I:  If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb

Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoBluetooth: Add support for Atheros [0cf3:3121]
AceLan Kao [Wed, 17 Jul 2013 03:27:40 +0000]
Bluetooth: Add support for Atheros [0cf3:3121]

commit 1ebd0b21ab14efb75950079840eac29afea2a26e upstream.

Add support for the AR3012 chip.

T:  Bus=03 Lev=01 Prnt=01 Port=06 Cnt=01 Dev#=  6 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0cf3 ProdID=3121 Rev=00.02
C:  #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I:  If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb

Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoBluetooth: ath3k: Add support for ID 0x13d3/0x3402
Sujith Manoharan [Mon, 15 Jul 2013 03:59:03 +0000]
Bluetooth: ath3k: Add support for ID 0x13d3/0x3402

commit 5b77a1f3d7b7360dc2b7c6d2188d39b9f8432907 upstream.

T:  Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=  5 Spd=12   MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=13d3 ProdID=3402 Rev= 0.02
S:  Manufacturer=Atheros Communications
S:  Product=Bluetooth USB Host Controller
S:  SerialNumber=Alaska Day 2006
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=59701

Signed-off-by: Sujith Manoharan <sujith@msujith.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoBluetooth: ath3k: don't use stack memory for DMA
Stanislaw Gruszka [Mon, 8 Jul 2013 08:27:23 +0000]
Bluetooth: ath3k: don't use stack memory for DMA

commit 517828a87994f41af6ae5a0f96f0f069f05baa81 upstream.

Memory allocated by vmalloc (including stack) can not be used for DMA,
i.e. data pointer on usb_control_msg() should not point to stack memory.

Resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=977558

Reported-and-tested-by: Andy Lawrence <dr.diesel@gmail.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoBluetooth: ath3k: Add support for Fujitsu Lifebook UH5x2 [04c5:1330]
Thomas Loo [Wed, 3 Jul 2013 00:53:54 +0000]
Bluetooth: ath3k: Add support for Fujitsu Lifebook UH5x2 [04c5:1330]

commit 84eb2ae1807dd1467bf6f500fc69ae61f1907b75 upstream.

The Fujitsu Lifebook UH552/UH572 ships with a Qualcomm AR9462/AR3012
WLAN/BT-Combo card.
Add device ID to the ath3k driver to enable the bluetooth side of things.
Patch against v3.10.

T:  Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#=  3 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=04c5 ProdID=1330 Rev=00.02
C:  #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I:  If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb

Signed-off-by: Thomas Loo <tloo@saltstorm.net>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoath: wil6210: Fix build error
Larry Finger [Sun, 21 Jul 2013 02:46:48 +0000]
ath: wil6210: Fix build error

commit 5d21608a592a9afcac8d82c6478a564e911ce70b upstream.

Building driver wil6210 in 3.10 and 3.11 kernels yields the following errors:

CC [M] drivers/net/wireless/ath/wil6210/debugfs.o
drivers/net/wireless/ath/wil6210/debugfs.c: In function 'wil_print_ring':
drivers/net/wireless/ath/wil6210/debugfs.c:163:11: error: pointer targets in passing argument 5 of 'hex_dump_to_buffer' differ in signedness [-Werror=pointer-sign]
           false);
           ^
In file included from include/linux/kernel.h:13:0,
                 from include/linux/cache.h:4,
                 from include/linux/time.h:4,
                 from include/linux/stat.h:18,
                 from include/linux/module.h:10,
                 from drivers/net/wireless/ath/wil6210/debugfs.c:17:
include/linux/printk.h:361:13: note: expected 'char *' but argument is of type 'unsigned char *'
 extern void hex_dump_to_buffer(const void *buf, size_t len,
             ^
drivers/net/wireless/ath/wil6210/debugfs.c: In function 'wil_txdesc_debugfs_show':
drivers/net/wireless/ath/wil6210/debugfs.c:429:10: error: pointer targets in passing argument 5 of 'hex_dump_to_buffer' differ in signedness [-Werror=pointer-sign]
          sizeof(printbuf), false);
          ^
In file included from include/linux/kernel.h:13:0,
                 from include/linux/cache.h:4,
                 from include/linux/time.h:4,
                 from include/linux/stat.h:18,
                 from include/linux/module.h:10,
                 from drivers/net/wireless/ath/wil6210/debugfs.c:17:
include/linux/printk.h:361:13: note: expected 'char *' but argument is of type 'unsigned char *'
 extern void hex_dump_to_buffer(const void *buf, size_t len,
             ^
cc1: all warnings being treated as errors
make[5]: *** [drivers/net/wireless/ath/wil6210/debugfs.o] Error 1
make[4]: *** [drivers/net/wireless/ath/wil6210] Error 2
make[3]: *** [drivers/net/wireless/ath] Error 2
make[2]: *** [drivers/net/wireless] Error 2
make[1]: *** [drivers/net] Error 2
make: *** [drivers] Error 2

These errors are fixed by changing the type of the buffer from "unsigned char *" to "char *".

Reported-by: Thomas Fjellstrom <thomas@fjellstrom.ca>
Tested-by: Thomas Fjellstrom <thomas@fjellstrom.ca>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Thomas Fjellstrom <thomas@fjellstrom.ca>
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoixgbe: Fix Tx Hang issue with lldpad on 82598EB
Jacob Keller [Fri, 26 Jul 2013 12:46:35 +0000]
ixgbe: Fix Tx Hang issue with lldpad on 82598EB

commit 1eb9ac14c34a948bf1538bfb9034e8ab29099a64 upstream.

This patch fixes an issue with the 82598EB device, where lldpad is causing Tx
Hangs on the card as soon as it attempts to configure DCB for the device. The
adapter will continually Tx hang and reset in a loop.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Tested-by: Jack Morgan <jack.morgan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agomac80211: fix monitor interface suspend crash regression
Stanislaw Gruszka [Tue, 23 Jul 2013 11:56:50 +0000]
mac80211: fix monitor interface suspend crash regression

commit cd34f647a78e7f2296fcb72392b9e5c832793e65 upstream.

My commit:

commit 12e7f517029dad819c45eca9ca01fdb9ba57616b
Author: Stanislaw Gruszka <sgruszka@redhat.com>
Date:   Thu Feb 28 10:55:26 2013 +0100

    mac80211: cleanup generic suspend/resume procedures

removed check for deleting MONITOR and AP_VLAN when suspend. That can
cause a crash (i.e. in iwlagn_mac_remove_interface()) since we remove
interface in the driver that we did not add before.

Reference:
http://marc.info/?l=linux-kernel&m=137391815113860&w=2

Bisected-by: Ortwin Glück <odi@odi.ch>
Reported-and-tested-by: Ortwin Glück <odi@odi.ch>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agomac80211: fix ethtool stats for non-station interfaces
Johannes Berg [Mon, 8 Jul 2013 08:43:31 +0000]
mac80211: fix ethtool stats for non-station interfaces

commit e13bae4f807401729b3f27c7e882a96b8b292809 upstream.

As reported in https://bugzilla.kernel.org/show_bug.cgi?id=60514,
the station loop never initialises 'sinfo' and therefore adds up
a stack values, leaking stack information (the number of times it
adds values is easily obtained another way.)

Fix this by initialising the sinfo for each station to add.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agomac80211: fix duplicate retransmission detection
Johannes Berg [Thu, 11 Jul 2013 20:33:26 +0000]
mac80211: fix duplicate retransmission detection

commit 6b0f32745dcfba01d7be33acd1b40306c7a914c6 upstream.

The duplicate retransmission detection code in mac80211
erroneously attempts to do the check for every frame,
even frames that don't have a sequence control field or
that don't use it (QoS-Null frames.)

This is problematic because it causes the code to access
data beyond the end of the SKB and depending on the data
there will drop packets erroneously.

Correct the code to not do duplicate detection for such
frames.

I found this error while testing AP powersave, it lead
to retransmitted PS-Poll frames being dropped entirely
as the data beyond the end of the SKB was always zero.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agomac80211/minstrel_ht: fix cck rate sampling
Felix Fietkau [Fri, 28 Jun 2013 19:04:35 +0000]
mac80211/minstrel_ht: fix cck rate sampling

commit 1cd158573951f737fbc878a35cb5eb47bf9af3d5 upstream.

The CCK group needs special treatment to set the right flags and rate
index. Add this missing check to prevent setting broken rates for tx
packets.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agomac80211/minstrel: fix NULL pointer dereference issue
Felix Fietkau [Mon, 15 Jul 2013 12:35:06 +0000]
mac80211/minstrel: fix NULL pointer dereference issue

commit 5c9fc93bc9bc417418fc1b6366833ae6a07b804d upstream.

When priv_sta == NULL, mi->prev_sample is dereferenced too early. Move
the assignment further down, after the rate_control_send_low call.

Reported-by: Krzysztof Mazur <krzysiek@podlesie.net>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agonl80211: fix mgmt tx status and testmode reporting for netns
Michal Kazior [Tue, 25 Jun 2013 07:17:17 +0000]
nl80211: fix mgmt tx status and testmode reporting for netns

commit a0ec570f4f69c4cb700d743a915096c2c8f56a99 upstream.

These two events were sent to the default network
namespace.

This caused AP mode in a non-default netns to not
work correctly. Mgmt tx status was multicasted to
a different (default) netns instead of the one the
AP was in.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoath9k_htc: reboot firmware if it was loaded
Oleksij Rempel [Fri, 19 Jul 2013 18:16:18 +0000]
ath9k_htc: reboot firmware if it was loaded

commit 4928bd2ef8ece262f4f314630219999a91eaa440 upstream.

Currently ath9k_htc will reboot firmware only if interface was
ever started. Which lead to the problem in case where interface
was never started but module need to be reloaded.

This patch will partially fix bug "ath9k_htc: Target is unresponsive"
https://github.com/qca/open-ath9k-htc-firmware/issues/1

Reproduction case:
- plug adapter
- make sure nothing will touch it. Stop Networkmanager or blacklist mac address of this adapter.
- rmmod ath9k_htc; sleep 1; modprobe ath9k_htc

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoath9k_htc: do some initial hardware configuration
Oleksij Rempel [Fri, 19 Jul 2013 18:16:17 +0000]
ath9k_htc: do some initial hardware configuration

commit dc2a87f519a4d8cb376ab54f22b6b98a943b51ce upstream.

Currently we configure harwdare and clock, only after
interface start. In this case, if we reload module or
reboot PC without configuring adapter, firmware will freeze.
There is no software way to reset adpter.

This patch add initial configuration and set it in
disabled state, to avoid this freeze. Behaviour of this patch
should be similar to: ifconfig wlan0 up; ifconfig wlan0 down.

Bug: https://github.com/qca/open-ath9k-htc-firmware/issues/1
Tested-by: Bo Shi <cnshibo@gmail.com>
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoiwlwifi: mvm: fix flushing not started aggregation sessions
Johannes Berg [Wed, 24 Jul 2013 11:55:51 +0000]
iwlwifi: mvm: fix flushing not started aggregation sessions

commit b6658ff80c43bcf84be0bbe371c88af1452e7776 upstream.

When a not fully started aggregation session is destroyed
and flushed, we get a warning, e.g.

  WARNING: at drivers/net/wireless/iwlwifi/pcie/tx.c:1142 iwl_trans_pcie_txq_disable+0x11c/0x160
  queue 16 not used
  Modules linked in: [...]
  Pid: 5135, comm: hostapd Tainted: G        W  O 3.5.0 #10
  Call Trace:
  wlan0: driver sets block=0 for sta 00:03:7f:10:44:d3
   [<ffffffff81036492>] warn_slowpath_common+0x72/0xa0
   [<ffffffff81036577>] warn_slowpath_fmt+0x47/0x50
   [<ffffffffa0368d6c>] iwl_trans_pcie_txq_disable+0x11c/0x160 [iwlwifi]
   [<ffffffffa03a2099>] iwl_mvm_sta_tx_agg_flush+0xe9/0x150 [iwlmvm]
   [<ffffffffa0396c43>] iwl_mvm_mac_ampdu_action+0xf3/0x1e0 [iwlmvm]
   [<ffffffffa0293ad3>] ___ieee80211_stop_tx_ba_session+0x193/0x920 [mac80211]
   [<ffffffffa0294ed8>] __ieee80211_stop_tx_ba_session+0x48/0x70 [mac80211]
   [<ffffffffa029159f>] ieee80211_sta_tear_down_BA_sessions+0x4f/0x80 [mac80211]
   [<ffffffffa028a686>] __sta_info_destroy+0x66/0x370 [mac80211]
   [<ffffffffa028abb4>] sta_info_destroy_addr_bss+0x44/0x70 [mac80211]
   [<ffffffffa02a3e26>] ieee80211_del_station+0x26/0x50 [mac80211]
   [<ffffffffa01e6395>] nl80211_del_station+0x85/0x200 [cfg80211]

when a station deauthenticated from us without fully setting
up the aggregation session.

Fix this by checking the aggregation state before removing
the hardware queue.

Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoiwlwifi: add DELL SKU for 5150 HMC
Emmanuel Grumbach [Thu, 18 Jul 2013 16:11:26 +0000]
iwlwifi: add DELL SKU for 5150 HMC

commit a1923f1d4723e5757cefdd60f7c7ab30e472007a upstream.

This SKU was missing in the list of supported devices

https://bugzilla.kernel.org/show_bug.cgi?id=60577

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoiwlwifi: mvm: refuse connection to APs with BI < 16
Johannes Berg [Thu, 4 Jul 2013 13:55:29 +0000]
iwlwifi: mvm: refuse connection to APs with BI < 16

commit 48bc13072109ea58465542aa1ee31b4e1065468a upstream.

Due to a firmware bug, it crashes when the beacon interval
is smaller than 16. Avoid this by refusing the station state
change creating the AP station, causing mac80211 to abandon
the attempt to connect to the AP, and eventually wpa_s to
blacklist it.

Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoiwlwifi: mvm: fix bug in scan ssid
David Spinadel [Thu, 4 Jul 2013 12:17:48 +0000]
iwlwifi: mvm: fix bug in scan ssid

commit fe04e83706037802c502ea41c0d1799ec35fc0d7 upstream.

Increment index in each iteration. Without this increment we are
overriding the added SSIDs and we will send only the last SSId
and (n_ssids - 1) broadcast probes.

Signed-off-by: David Spinadel <david.spinadel@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoiwlwifi: mvm: fix L2P BA ressources leak
Emmanuel Grumbach [Tue, 2 Jul 2013 10:35:35 +0000]
iwlwifi: mvm: fix L2P BA ressources leak

commit 93a426673fbfeae7fa6b27008828e2ac4c08dbee upstream.

We didn't release the Rx AMPDU ressources properly.
This bug led to firmware assert after 16 BA sessions.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoUSB: mos7840: fix pointer casts
Johan Hovold [Sat, 27 Jul 2013 11:34:42 +0000]
USB: mos7840: fix pointer casts

commit 683a0e4d7971c3186dc4d429027debfe309129aa upstream.

Silence compiler warnings on 64-bit systems introduced by commit
05cf0dec ("USB: mos7840: fix race in led handling") which uses the
usb-serial data pointer to temporarily store the device type during
probe but failed to add the required casts.

[gregkh - change uintptr_t to unsigned long]

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoUSB: mos7840: fix race in led handling
Johan Hovold [Fri, 26 Jul 2013 09:55:19 +0000]
USB: mos7840: fix race in led handling

commit 05cf0dec5ccc696a7636c84b265b477173498156 upstream.

Fix race in LED handling introduced by commit 0eafe4de ("USB: serial:
mos7840: add support for MCS7810 devices") which reused the port control
urb for manipulating the LED without making sure that the urb is not
already in use. This could lead to the control urb being manipulated
while in flight.

Fix by adding a dedicated LED urb and ctrlrequest along with a LED-busy
flag to handle concurrency.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoUSB: mos7840: fix device-type detection
Johan Hovold [Fri, 26 Jul 2013 09:55:18 +0000]
USB: mos7840: fix device-type detection

commit 40c24f2893ba0ba7df485871f6aac0c197ceef5b upstream.

Fix race in device-type detection introduced by commit 0eafe4de ("USB:
serial: mos7840: add support for MCS7810 devices") which used a static
variable to hold the device type.

Move type detection to probe and use serial data to store the device
type.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoUSB: mos7840: fix race in register handling
Johan Hovold [Fri, 26 Jul 2013 09:55:17 +0000]
USB: mos7840: fix race in register handling

commit d8a083cc746664916d9d36ed9e4d08a29525f245 upstream.

Fix race in mos7840_get_reg which unconditionally manipulated the
control urb (which may already be in use) by adding a control-urb busy
flag.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agodma: pl330: Fix cyclic transfers
Lars-Peter Clausen [Tue, 23 Jul 2013 08:24:50 +0000]
dma: pl330: Fix cyclic transfers

commit fc51446021f42aca8906e701fc2292965aafcb15 upstream.

Allocate a descriptor for each period of a cyclic transfer, not just the first.
Also since the callback needs to be called for each finished period make sure to
initialize the callback and callback_param fields of each descriptor in a cyclic
transfer.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoserial/mxs-auart: increase time to wait for transmitter to become idle
Uwe Kleine-König [Fri, 28 Jun 2013 09:49:41 +0000]
serial/mxs-auart: increase time to wait for transmitter to become idle

commit 079a036f4283e2b0e5c26080b8c5112bc0cc1831 upstream.

Without this patch the driver waits ~1 ms for the UART to become idle. At
115200n8 this time is (theoretically) enough to transfer 11.5 characters
(= 115200 bits/s / (10 Bits/char) * 1ms). As the mxs-auart has a fifo size
of 16 characters the clock is gated too early. The problem is worse for
lower baud rates.

This only happens to really shut down the transmitter in the middle of a
transfer if /dev/ttyAPPx isn't opened in userspace (e.g. by a getty) but
was at least once (because the bootloader doesn't disable the transmitter).

So increase the timeout to 20 ms which should be enough for 9600n8, too.
Moreover skip gating the clock if the timeout is elapsed.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoserial: arc_uart: Fix module alias
Axel Lin [Sun, 21 Jul 2013 02:14:15 +0000]
serial: arc_uart: Fix module alias

commit d5a12ea7a9e58d9e5c19d25cb668aadb396423ec upstream.

Platform drivers use "platform:" prefix in module alias.
Also use DRIVER_NAME in MODULE_ALIAS to make module autoloading work.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoserial/mxs-auart: fix race condition in interrupt handler
Uwe Kleine-König [Thu, 4 Jul 2013 09:28:51 +0000]
serial/mxs-auart: fix race condition in interrupt handler

commit d970d7fe65adff5efe75b4a73c4ffc9be57089f7 upstream.

The handler needs to ack the pending events before actually handling them.
Otherwise a new event might come in after it it considered non-pending or
handled and is acked then without being handled. So this event is only
noticed when the next interrupt happens.

Without this patch an i.MX28 based machine running an rt-patched kernel
regularly hangs during boot.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoALSA: compress: fix the return value for SNDRV_COMPRESS_VERSION
Vinod Koul [Mon, 29 Jul 2013 09:40:22 +0000]
ALSA: compress: fix the return value for SNDRV_COMPRESS_VERSION

commit a8d30608eaed6cc759b8e2e8a8bbbb42591f797f upstream.

the return value of SNDRV_COMPRESS_VERSION always return default -ENOTTY as the
return value was never updated for this call
assign return value from put_user()

Reported-by: Haynes <hgeorge@codeaurora.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoALSA: hda - Fix missing fixup for Mac Mini with STAC9221
Takashi Iwai [Thu, 1 Aug 2013 06:38:27 +0000]
ALSA: hda - Fix missing fixup for Mac Mini with STAC9221

commit 697aebab78a88c6b164cfb74d19b86817d2ccd82 upstream.

A fixup for Apple Mac Mini was lost during the adaption to the generic
parser because the fallback for the generic ID 8384:7680 was dropped,
and it resulted in the silence output (and maybe other problems).

Unfortunately, just adding the missing subsystem ID wasn't enough, in
this case.  The subsystem ID of this machine is 0000:0100 (what Apple
thought...?), and since snd_hda_pick_fixup() doesn't take the vendor
id zero into account, the driver ignored this entry.  Now it's fixed
to regard the vendor id zero as a valid value.

Reported-and-tested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agohwmon: (max6697) fix MAX6581 ideality
Vivien Didelot [Tue, 30 Jul 2013 21:14:34 +0000]
hwmon: (max6697) fix MAX6581 ideality

commit 5c52add19733eb36d8619713312f5604efef3502 upstream.

Without this patch, the values for ideality (register 0x4b) and ideality
selection mask (register 0x4c) are inverted.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoparisc: Fix interrupt routing for C8000 serial ports
Thomas Bogendoerfer [Tue, 30 Jul 2013 00:02:16 +0000]
parisc: Fix interrupt routing for C8000 serial ports

commit dd5e6d6a3db09b16b7c222943977865eead88cc3 upstream.

We can't use dev->mod_index for selecting the interrupt routing entry,
because it's not an index into interrupt routing table. It will be even
wrong on a machine with 2 CPUs (4 cores). But all needed information is
contained in the PAT entries for the serial ports. mod[0] contains the
iosapic address and mod_info has some indications for the interrupt
input (at least it looks like it). This patch implements the searching
for the right iosapic and uses this interrupt input information.

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoparisc: Fix cache routines to ignore vma's with an invalid pfn
John David Anglin [Tue, 23 Jul 2013 16:27:52 +0000]
parisc: Fix cache routines to ignore vma's with an invalid pfn

commit 50861f5a02dbf939c27d35a26c472885e2844188 upstream.

The parisc architecture does not have a pte special bit. As a result,
special mappings are handled with the VM_PFNMAP and VM_MIXEDMAP flags.
VM_MIXEDMAP mappings may or may not have a "struct page" backing. When
pfn_valid() is false, there is no "struct page" backing. Otherwise, they
are treated as normal pages.

The FireGL driver uses the VM_MIXEDMAP without a backing "struct page".
This treatment caused a panic due to a TLB data miss in
update_mmu_cache. This appeared to be in the code generated for
page_address(). We were in fact using a very circular bit of code to
determine the physical address of the PFN in various cache routines.
This wasn't valid when there was no "struct page" backing.  The needed
address can in fact be determined simply from the PFN itself without
using the "struct page".

The attached patch updates update_mmu_cache(), flush_cache_mm(),
flush_cache_range() and flush_cache_page() to check pfn_valid() and to
directly compute the PFN physical and virtual addresses.

Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoparisc: agp/parisc-agp: allow binding of user memory to the AGP GART
Alex Ivanov [Wed, 10 Jul 2013 19:14:55 +0000]
parisc: agp/parisc-agp: allow binding of user memory to the AGP GART

commit 06f0cce43a32bd2357cea1d8733bba48693d556b upstream.

Allow binding of user memory to the AGP GART on systems with HP
Quicksilver AGP bus. This resolves 'bind memory failed' error seen in
dmesg:

 [29.365973] [TTM] AGP Bind memory failed.
 …
 [29.367030] [drm] Forcing AGP to PCI mode

The system doesn't more fail to bind the memory, and hence not falling
back to the PCI mode (if other failures aren't detected).

This is just a simple write down from the following patches:
agp/amd-k7: Allow binding user memory to the AGP GART
agp/hp-agp: Allow binding user memory to the AGP GART

Signed-off-by: Alex Ivanov <gnidorah@p0n4ik.tk>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agopowerpc: VPHN topology change updates all siblings
Robert Jennings [Thu, 25 Jul 2013 01:13:21 +0000]
powerpc: VPHN topology change updates all siblings

commit 3be7db6ab45b21345386d1a466da133b19cde5e4 upstream.

When an associativity level change is found for one thread, the
siblings threads need to be updated as well.  This is done today
for PRRN in stage_topology_update() but is missing for VPHN in
update_cpu_associativity_changes_mask().  This patch will correctly
update all thread siblings during a topology change.

Without this patch a topology update can result in a CPU in
init_sched_groups_power() getting stuck indefinitely in a loop.

This loop is built in build_sched_groups(). As a result of the thread
moving to a node separate from its siblings the struct sched_group will
have its next pointer set to point to itself rather than the sched_group
struct of the next thread.  This happens because we have a domain without
the SD_OVERLAP flag, which is correct, and a topology that doesn't conform
with reality (threads on the same core assigned to different numa nodes).
When this list is traversed by init_sched_groups_power() it will reach
the thread's sched_group structure and loop indefinitely; the cpu will
be stuck at this point.

The bug was exposed when VPHN was enabled in commit b7abef0 (v3.9).

Reported-by: Jan Stancek <jstancek@redhat.com>
Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoARM: 7791/1: a.out: remove partial a.out support
Will Deacon [Thu, 25 Jul 2013 10:44:48 +0000]
ARM: 7791/1: a.out: remove partial a.out support

commit acfdd4b1f7590d02e9bae3b73bdbbc4a31b05d38 upstream.

a.out support on ARM requires that argc, argv and envp are passed in
r0-r2 respectively, which requires hacking load_aout_binary to
prevent argc being clobbered by the return code. Whilst mainline kernels
do set the registers up in start_thread, the aout loader has never
carried the hack in mainline.

Initialising the registers in this way actually goes against the libc
expectations for ELF binaries, where argc, argv and envp are passed on
the stack, with r0 being used to hold a pointer to an exit function for
cleaning up after the dynamic linker if required. If the pointer is
NULL, then it is ignored. When execing an ELF binary, Linux currently
zeroes r0, then sets it to argc and then finally clobbers it with the
return value of the execve syscall, so we actually end up with:

r0 = 0
stack[0] = argc
r1 = stack[1] = argv
r2 = stack[2] = envp

libc treats r1 and r2 as undefined. The clobbering of r0 by sys_execve
works for user-spawned threads, but when executing an ELF binary from a
kernel thread (via call_usermodehelper), the execve is performed on the
ret_from_fork path, which restores r0 from the saved pt_regs, resulting
in argc being presented to the C library. This has horrible consequences
when the application exits, since we have an exit function registered
using argc, resulting in a jump to hyperspace.

This patch solves the problem by removing the partial a.out support from
arch/arm/ altogether.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Cc: Ashish Sangwan <ashishsangwan2@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoARM: 7790/1: Fix deferred mm switch on VIVT processors
Catalin Marinas [Tue, 23 Jul 2013 15:15:36 +0000]
ARM: 7790/1: Fix deferred mm switch on VIVT processors

commit bdae73cd374e28db544fdd9b77de689a36e3c129 upstream.

As of commit b9d4d42ad9 (ARM: Remove __ARCH_WANT_INTERRUPTS_ON_CTXSW on
pre-ARMv6 CPUs), the mm switching on VIVT processors is done in the
finish_arch_post_lock_switch() function to avoid whole cache flushing
with interrupts disabled. The need for deferred mm switch is stored as a
thread flag (TIF_SWITCH_MM). However, with preemption enabled, we can
have another thread switch before finish_arch_post_lock_switch(). If the
new thread has the same mm as the previous 'next' thread, the scheduler
will not call switch_mm() and the TIF_SWITCH_MM flag won't be set for
the new thread.

This patch moves the switch pending flag to the mm_context_t structure
since this is specific to the mm rather than thread.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Marc Kleine-Budde <mkl@pengutronix.de>
Tested-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoARM: 7784/1: mm: ensure SMP alternates assemble to exactly 4 bytes with Thumb-2
Will Deacon [Mon, 15 Jul 2013 13:26:19 +0000]
ARM: 7784/1: mm: ensure SMP alternates assemble to exactly 4 bytes with Thumb-2

commit bf3f0f332f76a85ff3a0b393aaded5a8533769c0 upstream.

Commit ae8a8b9553bd ("ARM: 7691/1: mm: kill unused TLB_CAN_READ_FROM_L1_CACHE
and use ALT_SMP instead") added early function returns for page table
cache flushing operations on ARMv7 SMP CPUs.

Unfortunately, when targetting Thumb-2, these `mov pc, lr' sequences
assemble to 2 bytes which can lead to corruption of the instruction
stream after code patching.

This patch fixes the alternates to use wide (32-bit) instructions for
Thumb-2, therefore ensuring that the patching code works correctly.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agopowerpc/windfarm: Fix noisy slots-fan on Xserve (rm31)
Aaro Koskinen [Sun, 21 Jul 2013 00:30:11 +0000]
powerpc/windfarm: Fix noisy slots-fan on Xserve (rm31)

commit fe956a1d4081ce1a959f87df397a15e252201f10 upstream.

slots-fan on G5 Xserve is always running at full speed with windfarm_rm31
driver, resulting in a very high acoustic noise level. It seems the fan
parameters are incorrect, and have been copied from the Drive Bay fan
(RPM, not present on rm31) of the legacy therm_pm72 driver. This patch
changes the parameters to match the Slots fan (PWM) of therm_pm72. With
the patch, slots-fan speed drops from 99% to 19% during normal use,
and slots-temp settle to ~42'C.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoARM: fix nommu builds with 48be69a02 (ARM: move signal handlers into a vdso-like...
Russell King [Sat, 3 Aug 2013 09:39:51 +0000]
ARM: fix nommu builds with 48be69a02 (ARM: move signal handlers into a vdso-like page)

commit 8c0cc8a5d90bc7373a7a9e7f7a40eb41f51e03fc upstream.

Olof reports that noMMU builds error out with:

arch/arm/kernel/signal.c: In function 'setup_return':
arch/arm/kernel/signal.c:413:25: error: 'mm_context_t' has no member named 'sigpage'

This shows one of the evilnesses of IS_ENABLED().  Get rid of it here
and replace it with #ifdef's - and as no noMMU platform can make use
of sigpage, depend on CONIFG_MMU not CONFIG_ARM_MPU.

Reported-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoARM: fix a cockup in 48be69a02 (ARM: move signal handlers into a vdso-like page)
Russell King [Sat, 3 Aug 2013 09:30:05 +0000]
ARM: fix a cockup in 48be69a02 (ARM: move signal handlers into a vdso-like page)

commit e0d407564b532d978b03ceccebd224a05d02f111 upstream.

Unfortunately, I never committed the fix to a nasty oops which can
occur as a result of that commit:

------------[ cut here ]------------
kernel BUG at /home/olof/work/batch/include/linux/mm.h:414!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM
Modules linked in:
CPU: 0 PID: 490 Comm: killall5 Not tainted 3.11.0-rc3-00288-gabe0308 #53
task: e90acac0 ti: e9be8000 task.ti: e9be8000
PC is at special_mapping_fault+0xa4/0xc4
LR is at __do_fault+0x68/0x48c

This doesn't show up unless you do quite a bit of testing; a simple
boot test does not do this, so all my nightly tests were passing fine.

The reason for this is that install_special_mapping() expects the
page array to stick around, and as this was only inserting one page
which was stored on the kernel stack, that's why this was blowing up.

Reported-by: Olof Johansson <olof@lixom.net>
Tested-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoARM: make vectors page inaccessible from userspace
Russell King [Wed, 31 Jul 2013 20:58:56 +0000]
ARM: make vectors page inaccessible from userspace

commit a5463cd3435475386cbbe7b06e01292ac169d36f upstream.

If kuser helpers are not provided by the kernel, disable user access to
the vectors page.  With the kuser helpers gone, there is no reason for
this page to be visible to userspace.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoARM: move signal handlers into a vdso-like page
Russell King [Tue, 23 Jul 2013 23:29:18 +0000]
ARM: move signal handlers into a vdso-like page

commit 48be69a026b2c17350a5ef18a1959a919f60be7d upstream.

Move the signal handlers into a VDSO page rather than keeping them in
the vectors page.  This allows us to place them randomly within this
page, and also map the page at a random location within userspace
further protecting these code fragments from ROP attacks.  The new
VDSO page is also poisoned in the same way as the vector page.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoARM: allow kuser helpers to be removed from the vector page
Russell King [Tue, 23 Jul 2013 17:37:00 +0000]
ARM: allow kuser helpers to be removed from the vector page

commit f6f91b0d9fd971c630cef908dde8fe8795aefbf8 upstream.

Provide a kernel configuration option to allow the kernel user helpers
to be removed from the vector page, thereby preventing their use with
ROP (return orientated programming) attacks.  This option is only
visible for CPU architectures which natively support all the operations
which kernel user helpers would normally provide, and must be enabled
with caution.

Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoARM: update FIQ support for relocation of vectors
Russell King [Tue, 9 Jul 2013 00:03:17 +0000]
ARM: update FIQ support for relocation of vectors

commit e39e3f3ebfef03450cf7bfa7a974a8c61f7980c8 upstream.

FIQ should no longer copy the FIQ code into the user visible vector
page.  Instead, it should use the hidden page.  This change makes
that happen.

Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoARM: use linker magic for vectors and vector stubs
Russell King [Thu, 4 Jul 2013 11:03:31 +0000]
ARM: use linker magic for vectors and vector stubs

commit b9b32bf70f2fb710b07c94e13afbc729afe221da upstream.

Use linker magic to create the vectors and vector stubs: we can tell the
linker to place them at an appropriate VMA, but keep the LMA within the
kernel.  This gets rid of some unnecessary symbol manipulation, and
have the linker calculate the relocations appropriately.

Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoARM: move vector stubs
Russell King [Thu, 4 Jul 2013 10:40:32 +0000]
ARM: move vector stubs

commit 19accfd373847ac3d10623c5d20f948846299741 upstream.

Move the machine vector stubs into the page above the vector page,
which we can prevent from being visible to userspace.  Also move
the reset stub, and place the swi vector at a location that the
'ldr' can get to it.

This hides pointers into the kernel which could give valuable
information to attackers, and reduces the number of exploitable
instructions at a fixed address.

Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoARM: poison memory between kuser helpers
Russell King [Thu, 4 Jul 2013 10:32:04 +0000]
ARM: poison memory between kuser helpers

commit 5b43e7a383d69381ffe53423e46dd0fafae07da3 upstream.

Poison the memory between each kuser helper.  This ensures that any
branch between the kuser helpers will be appropriately trapped.

Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoARM: poison the vectors page
Russell King [Thu, 4 Jul 2013 10:00:23 +0000]
ARM: poison the vectors page

commit f928d4f2a86f46b030fa0850385b4391fc2b5918 upstream.

Fill the empty regions of the vectors page with an exception generating
instruction.  This ensures that any inappropriate branch to the vector
page is appropriately trapped, rather than just encountering some code
to execute.  (The vectors page was filled with zero before, which
corresponds with the "andeq r0, r0, r0" instruction - a no-op.)

Acked-by Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoLinux 3.10.5
Greg Kroah-Hartman [Sun, 4 Aug 2013 08:51:49 +0000]
Linux 3.10.5

6 years agox86: Fix /proc/mtrr with base/size more than 44bits
Yinghai Lu [Thu, 13 Jun 2013 22:33:35 +0000]
x86: Fix /proc/mtrr with base/size more than 44bits

commit d5c78673b1b28467354c2c30c3d4f003666ff385 upstream.

On one sytem that mtrr range is more then 44bits, in dmesg we have
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-DFFFF write-through
[    0.000000]   E0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 [000080000000-0000FFFFFFFF] mask 3FFF80000000 uncachable
[    0.000000]   1 [380000000000-38FFFFFFFFFF] mask 3F0000000000 uncachable
[    0.000000]   2 [000099000000-000099FFFFFF] mask 3FFFFF000000 write-through
[    0.000000]   3 [00009A000000-00009AFFFFFF] mask 3FFFFF000000 write-through
[    0.000000]   4 [381FFA000000-381FFBFFFFFF] mask 3FFFFE000000 write-through
[    0.000000]   5 [381FFC000000-381FFC0FFFFF] mask 3FFFFFF00000 write-through
[    0.000000]   6 [0000AD000000-0000ADFFFFFF] mask 3FFFFF000000 write-through
[    0.000000]   7 [0000BD000000-0000BDFFFFFF] mask 3FFFFF000000 write-through
[    0.000000]   8 disabled
[    0.000000]   9 disabled

but /proc/mtrr report wrong:
reg00: base=0x080000000 ( 2048MB), size= 2048MB, count=1: uncachable
reg01: base=0x80000000000 (8388608MB), size=1048576MB, count=1: uncachable
reg02: base=0x099000000 ( 2448MB), size=   16MB, count=1: write-through
reg03: base=0x09a000000 ( 2464MB), size=   16MB, count=1: write-through
reg04: base=0x81ffa000000 (8519584MB), size=   32MB, count=1: write-through
reg05: base=0x81ffc000000 (8519616MB), size=    1MB, count=1: write-through
reg06: base=0x0ad000000 ( 2768MB), size=   16MB, count=1: write-through
reg07: base=0x0bd000000 ( 3024MB), size=   16MB, count=1: write-through
reg08: base=0x09b000000 ( 2480MB), size=   16MB, count=1: write-combining

so bit 44 and bit 45 get cut off.

We have problems in arch/x86/kernel/cpu/mtrr/generic.c::generic_get_mtrr().
1. for base, we miss cast base_lo to 64bit before shifting.
Fix that by adding u64 casting.

2. for size, it only can handle 44 bits aka 32bits + page_shift
Fix that with 64bit mask instead of 32bit mask_lo, then range could be
more than 44bits.
At the same time, we need to update size_or_mask for old cpus that does
support cpuid 0x80000008 to get phys_addr. Need to set high 32bits
to all 1s, otherwise will not get correct size for them.

Also fix mtrr_add_page: it should check base and (base + size - 1)
instead of base and size, as base and size could be small but
base + size could bigger enough to be out of boundary. We can
use boot_cpu_data.x86_phys_bits directly to avoid size_or_mask.

So When are we going to have size more than 44bits? that is 16TiB.

after patch we have right ouput:
reg00: base=0x080000000 ( 2048MB), size= 2048MB, count=1: uncachable
reg01: base=0x380000000000 (58720256MB), size=1048576MB, count=1: uncachable
reg02: base=0x099000000 ( 2448MB), size=   16MB, count=1: write-through
reg03: base=0x09a000000 ( 2464MB), size=   16MB, count=1: write-through
reg04: base=0x381ffa000000 (58851232MB), size=   32MB, count=1: write-through
reg05: base=0x381ffc000000 (58851264MB), size=    1MB, count=1: write-through
reg06: base=0x0ad000000 ( 2768MB), size=   16MB, count=1: write-through
reg07: base=0x0bd000000 ( 3024MB), size=   16MB, count=1: write-through
reg08: base=0x09b000000 ( 2480MB), size=   16MB, count=1: write-combining

-v2: simply checking in mtrr_add_page according to hpa.

[ hpa: This probably wants to go into -stable only after having sat in
  mainline for a bit.  It is not a regression. ]

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/1371162815-29931-1-git-send-email-yinghai@kernel.org
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agodrm/i915: Correct obj->mm_list link to dev_priv->dev_priv->mm.inactive_list
Xiong Zhang [Fri, 5 Jul 2013 10:53:29 +0000]
drm/i915: Correct obj->mm_list link to dev_priv->dev_priv->mm.inactive_list

commit 067556084a0e412013af6b0250a3143ae5afde6d upstream.

obj->mm_list link to dev_priv->mm.inactive_list/active_list
obj->global_list link to dev_priv->mm.unbound_list/bound_list

This regression has been introduced in

commit 93927ca52a55c23e0a6a305e7e9082e8411ac9fa
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Thu Jan 10 18:03:00 2013 +0100

    drm/i915: Revert shrinker changes from "Track unbound pages"

Cc: stable@vger.kernel.org
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
[danvet: Add regression notice.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Zhouping Liu <zliu@redhat.com>

6 years agoperf tools: Revert regression in configuration of Python support
Michael Witten [Wed, 17 Apr 2013 02:23:16 +0000]
perf tools: Revert regression in configuration of Python support

commit a363a9da65d253fa7354ce5fd630f4f94df934cc upstream.

Among other things, the following:

  commit 31160d7feab786c991780d7f0ce2755a469e0e5e
  Date:   Tue Jan 8 16:22:36 2013 -0500
  perf tools: Fix GNU make v3.80 compatibility issue

attempts to aid the user by tapping into an existing error message,
as described in the commit message:

  ... Also fix an issue where _get_attempt was called with only
  one argument. This prevented the error message from printing
  the name of the variable that can be used to fix the problem.

or more precisely:

  -$(if $($(1)),$(call _ge_attempt,$($(1)),$(1)),$(call _ge_attempt,$(2)))
  +$(if $($(1)),$(call _ge_attempt,$($(1)),$(1)),$(call _ge_attempt,$(2),$(1)))

However, The "missing" argument was in fact missing on purpose; it's
absence is a signal that the error message should be skipped, because
the failure would be due to the default value, not any user-supplied
value.  This can be seen in how `_ge_attempt' uses `gea_err' (in the
config/utilities.mak file):

  _ge_attempt = $(if $(get-executable),$(get-executable),$(_gea_warn)$(call _gea_err,$(2)))
  _gea_warn = $(warning The path '$(1)' is not executable.)
  _gea_err  = $(if $(1),$(error Please set '$(1)' appropriately))

That is, because the argument is no longer missing, the value `$(1)'
(associated with `_gea_err') always evaluates to true, thus always
triggering the error condition that is meant to be reserved for
only the case when a user explicitly supplies an invalid value.

Concretely, the result is a regression in the Makefile's configuration
of python support; rather than gracefully disable support when the
relevant executables cannot be found according to default values, the
build process halts in error as though the user explicitly supplied
the values.

This new commit simply reverts the offending one-line change.

Reported-by: Pekka Enberg <penberg@kernel.org>
Link: http://lkml.kernel.org/r/CAOJsxLHv17Ys3M7P5q25imkUxQW6LE_vABxh1N3Tt7Mv6Ho4iw@mail.gmail.com
Signed-off-by: Michael Witten <mfwitten@gmail.com>
Cc: Mark Brown <broonie@sirena.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>