8 years agoMerge branch 'topic/asoc' into for-linus
Takashi Iwai [Wed, 16 Mar 2011 16:38:41 +0000]
Merge branch 'topic/asoc' into for-linus

8 years agoMerge branch 'for-2.6.39' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/asoc...
Takashi Iwai [Wed, 16 Mar 2011 11:14:46 +0000]
Merge branch 'for-2.6.39' of git://git./linux/kernel/git/lrg/asoc-2.6 into topic/asoc

8 years agoALSA: firewire - msleep needs delay.h
Stephen Rothwell [Wed, 16 Mar 2011 06:39:28 +0000]
ALSA: firewire - msleep needs delay.h

fixes this error:

sound/firewire/fcp.c: In function 'fcp_avc_transaction':
sound/firewire/fcp.c:103: error: implicit declaration of function 'msleep'

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

8 years agoALSA: firewire-lib, firewire-speakers: handle packet queueing errors
Clemens Ladisch [Tue, 15 Mar 2011 06:57:24 +0000]
ALSA: firewire-lib, firewire-speakers: handle packet queueing errors

Add an AMDTP stream error state that occurs when we fail to queue
another packet.  In this case, the stream is stopped, and the error can
be reported when the application tries to restart the PCM stream.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

8 years agoALSA: firewire-lib: allocate DMA buffer separately
Clemens Ladisch [Tue, 15 Mar 2011 06:55:50 +0000]
ALSA: firewire-lib: allocate DMA buffer separately

For correct cache coherency on some architectures, DMA buffers must be
allocated in a different cache line than data that is concurrently used
by the CPU.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

8 years agoALSA: firewire-lib: use no-info SYT for packets without SYT sample
Clemens Ladisch [Tue, 15 Mar 2011 06:55:02 +0000]
ALSA: firewire-lib: use no-info SYT for packets without SYT sample

In non-blocking mode, the SYT_INTERVAL is larger than the number of
audio frames in each packet, so there are packets that do not contain
any frame to which the SYT could be applied.  For these packets, the
SYT must not be the timestamp of the next valid SYT frame, but the
special no-info SYT value.

This fixes broken playback on the FireWave at 44.1 kHz.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

8 years agoALSA: add LaCie FireWire Speakers/Griffin FireWave Surround driver
Clemens Ladisch [Tue, 15 Mar 2011 06:53:21 +0000]
ALSA: add LaCie FireWire Speakers/Griffin FireWave Surround driver

Add a driver for two playback-only FireWire devices based on the OXFW970
chip.

v2: better AMDTP API abstraction; fix fw_unit leak; small fixes
v3: cache the iPCR value
v4: FireWave constraints; fix fw_device reference counting;
    fix PCR caching; small changes and fixes
v5: volume/mute support; fix crashing due to pcm stop races
v6: fix build; one-channel volume for LaCie
v7: use signed values to make volume (range checks) work; fix function
    block IDs for volume/mute; always use channel 0 for LaCie volume

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Tested-by: Jay Fenlason <fenlason@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

8 years agoASoC: Fix spacing in MAX8950
Mark Brown [Fri, 11 Mar 2011 12:07:31 +0000]
ASoC: Fix spacing in MAX8950

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>

8 years agoASoC: PXA: Z2: Fix codec pin name
Vasily Khoruzhick [Fri, 11 Mar 2011 09:05:38 +0000]
ASoC: PXA: Z2: Fix codec pin name

MONO was renamed to MONO1.

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@kernel.org

8 years agoASoC: PXA: z2: Mute internal speaker when headphones are connected
Vasily Khoruzhick [Fri, 11 Mar 2011 09:05:37 +0000]
ASoC: PXA: z2: Mute internal speaker when headphones are connected

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

8 years agoASoC: Add MAX9850 codec driver
Christian Glindkamp [Wed, 9 Mar 2011 10:20:04 +0000]
ASoC: Add MAX9850 codec driver

This patch adds ASoC support for the MAX9850 codec with headphone
amplifier.

Supported features:
- Playback
- 16, 20 and 24 bit audio
- 8k - 48k sample rates
- DAPM

Signed-off-by: Christian Glindkamp <christian.glindkamp@taskit.de>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

8 years agoALSA: Add snd_ctl_activate_id()
Takashi Iwai [Fri, 29 Aug 2008 14:09:01 +0000]
ALSA: Add snd_ctl_activate_id()

Added a new API function snd_ctl_activate_id() for activate / inactivate
the control element dynamically.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

8 years agoMerge branch 'for-2.6.38' into for-2.6.39
Mark Brown [Thu, 10 Mar 2011 14:16:35 +0000]
Merge branch 'for-2.6.38' into for-2.6.39

8 years agoASoC: Ensure WM8958 gets all WM8994 late revision widgets
Mark Brown [Wed, 9 Mar 2011 19:10:15 +0000]
ASoC: Ensure WM8958 gets all WM8994 late revision widgets

Without this fix the driver won't instantiate properly on relevant
devices.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Cc: stable@kernel.org

8 years agoASoC: Fix typo in late revision WM8994 DAC2R name
Mark Brown [Wed, 9 Mar 2011 19:09:17 +0000]
ASoC: Fix typo in late revision WM8994 DAC2R name

Without this fix the driver won't instantiate properly on relevant
devices.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Cc: stable@kernel.org

8 years agoASoC: Enable 192kHz sample rate for EP93xx.
Alexander Sverdlin [Mon, 7 Mar 2011 17:30:12 +0000]
ASoC: Enable 192kHz sample rate for EP93xx.

Enable 192kHz sample rate for EP93xx.

Signed-off-by: Alexander Sverdlin <subaparts@yandex.ru>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

8 years agoASoC: Improve EP93xx I2S clocks management.
Alexander Sverdlin [Mon, 7 Mar 2011 17:30:36 +0000]
ASoC: Improve EP93xx I2S clocks management.

Improve EP93xx I2S clocks management.
Some freqs values are set not exact as they requested for MCLK and
original code was not able to find divisors for SCLK and LRCLK.
This code just picks up nearest value from 3 possible variants.
This patch makes 44100 and 192000 rates working and fixes
capture function (by selecting SCLK/LRCLK=64 where possible).
All other rates should work as before.

Signed-off-by: Alexander Sverdlin <subaparts@yandex.ru>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

8 years agoASoC: EDB93xx: Manage I2S rates according to datasheet for CS4271 CODEC.
Alexander Sverdlin [Mon, 7 Mar 2011 17:29:53 +0000]
ASoC: EDB93xx: Manage I2S rates according to datasheet for CS4271 CODEC.

Manage I2S rates according to datasheet for CS4271 CODEC in EDB93xx
machine driver.

Signed-off-by: Alexander Sverdlin <subaparts@yandex.ru>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

8 years agoASoC: Manage mode and rate bits correctly for CS4271 CODEC.
Alexander Sverdlin [Mon, 7 Mar 2011 17:29:45 +0000]
ASoC: Manage mode and rate bits correctly for CS4271 CODEC.

Manage mode and rate bits correctly, according to datasheet in CS4271 CODEC.
This is done to make capture work properly.

Signed-off-by: Alexander Sverdlin <subaparts@yandex.ru>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

8 years agoMerge branch 'for-2.6.38' into for-2.6.39
Mark Brown [Wed, 9 Mar 2011 12:37:42 +0000]
Merge branch 'for-2.6.38' into for-2.6.39

Conflicts:
sound/soc/codecs/wm8978.c
sound/soc/soc-dapm.c

8 years agoASoC: Fix double addition of prefixes due to widget prefixing
Mark Brown [Wed, 9 Mar 2011 11:33:09 +0000]
ASoC: Fix double addition of prefixes due to widget prefixing

We're not only prefixing all controls, we're also prefixing the widget
names in the runtime data. This causes us to add the prefix twice - once
when using the widget name to generate the control name and once when
adding the control.

Really we shouldn't be prefixing the widget names at all, the matching
code should be handing this as we always know which DAPM context a
widget came from and always display the widget name in terms of a DAPM
context.  However, we're quite close to the merge window and that's
relatively invasive.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Reported-by: Jarkko Nikula <jhnikula@gmail.com>
Acked-by: Jarkko Nikula <jhnikula@gmail.com>
Acked-by: Liam Girdwood <lrg@ti.com>

8 years agoASoC: Use the correct DAPM context when cleaning up final widget set
Mark Brown [Tue, 8 Mar 2011 19:29:53 +0000]
ASoC: Use the correct DAPM context when cleaning up final widget set

Now we've got multi-component we need to make sure that the DAPM context
(and hence register I/O context) we use to apply the pending updates at
the end of a DAPM sequence is the one we were processing rather than the
one that was used to initate the state change.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>

8 years agoASoC: Fix broken bitfield definitions in WM8978
Mark Brown [Wed, 2 Mar 2011 11:01:18 +0000]
ASoC: Fix broken bitfield definitions in WM8978

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Cc: stable@kernel.org

8 years agoASoC: Simplify WM9081 speaker startup by using widgets for spaker output
Mark Brown [Tue, 8 Mar 2011 18:52:08 +0000]
ASoC: Simplify WM9081 speaker startup by using widgets for spaker output

Now we have a register write minimisation code in DAPM we don't need to
worry about the ordering of the enable and disable of the PGA and the
output stage.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>

8 years agoASoC: omap: rx51: Enable McBSP2 sidetone
Jarkko Nikula [Wed, 9 Mar 2011 09:25:00 +0000]
ASoC: omap: rx51: Enable McBSP2 sidetone

McBSP sidetone is needed in telephony applications. McBSP sidetone is a
configurable FIR filter that forms a loopback from McBSP input to output.
This patch enables the McBSP2 sidetone ALSA controls so that it can be used
on Nokia RX-51/N900.

Sidetone feature can be tested with following commands:

(set up codec input and output paths)
# Enable and configure sidetone
amixer -D hw:0 set 'McBSP2 Sidetone' on
amixer set -D hw:0 'McBSP2 Sidetone Channel 0' 32767
echo 32767 >/sys/devices/platform/omap-mcbsp.2/st_taps
# Do not loop audio via CPU
arecord -f dat >/dev/null |aplay /dev/zero

Signed-off-by: Jarkko Nikula <jhnikula@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>

8 years agoASoC: sgtl5000: use after free in ldo_regulator_register()
Dan Carpenter [Tue, 8 Mar 2011 11:39:24 +0000]
ASoC: sgtl5000: use after free in ldo_regulator_register()

The "ldo" variable was dereferenced after free on the error path.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

8 years agoASoC: Fix prefixing of DAPM controls by factoring prefix into snd_soc_cnew()
Mark Brown [Tue, 8 Mar 2011 17:23:24 +0000]
ASoC: Fix prefixing of DAPM controls by factoring prefix into snd_soc_cnew()

Currently will ignore prefixes when creating DAPM controls. Since currently
all control creation goes through snd_soc_cnew() we can fix this by factoring
the prefixing into that function.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>

8 years agoASoC: Warn rather than set a silly constraint when we can't do symmetry
Mark Brown [Tue, 8 Mar 2011 00:17:56 +0000]
ASoC: Warn rather than set a silly constraint when we can't do symmetry

Symmetric rate configuration can fail if the second stream starting tries
to apply the symmetric constraint before the first stream has got far
enough to pick a rate. Rather than try to enforce a nonsensical rate of
0Hz log a warning and allow the application to carry on. Things might go
wrong later on but the user will know about it and there's unlikely to be
lasting damage.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>

8 years agoASoC: Refactor symmetric_rates check to reduce indentation
Mark Brown [Tue, 8 Mar 2011 00:11:15 +0000]
ASoC: Refactor symmetric_rates check to reduce indentation

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>

8 years agoASoC: Convert WM9081 SYSCLK configuration to be device wide
Mark Brown [Mon, 7 Mar 2011 20:59:45 +0000]
ASoC: Convert WM9081 SYSCLK configuration to be device wide

Also respace the CODEC ops a bit for legibility.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>

8 years agoASoC: Provide CODEC clocking operations and API calls
Mark Brown [Mon, 7 Mar 2011 20:58:11 +0000]
ASoC: Provide CODEC clocking operations and API calls

When multi component systems use DAIless amplifiers which require clocking
configuration it is at best hard to use the current clocking API as this
requires a DAI even though the device may not even have one. Address this
by adding set_sysclk() and set_pll() operations and APIs for CODECs.

In order to avoid issues with devices which could be used either with or
without DAIs make the DAI variants call through to their CODEC counterparts
if there is no DAI specific operation. Converting over entirely would create
problems for multi-DAI devices which offer per-DAI clocking setup.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>

8 years agoASoC: Fix section mismatch warnings in WM8994
Mark Brown [Mon, 7 Mar 2011 16:42:20 +0000]
ASoC: Fix section mismatch warnings in WM8994

Annoying as the __devinitdata is actually correct.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>

8 years agoASoC: Use data based init for WM9081 DAPM
Mark Brown [Mon, 7 Mar 2011 16:39:50 +0000]
ASoC: Use data based init for WM9081 DAPM

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>

8 years agoASoC: Add DAPM widget and path data to CODEC driver structure
Mark Brown [Mon, 7 Mar 2011 16:38:44 +0000]
ASoC: Add DAPM widget and path data to CODEC driver structure

Allow a slight simplification of CODEC drivers by allowing DAPM routes and
widgets to be provided in a table. They will be instantiated at the end of
CODEC probe.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>

8 years agoLinux 2.6.38-rc8
Linus Torvalds [Tue, 8 Mar 2011 05:09:37 +0000]
Linux 2.6.38-rc8

8 years agoMerge branch 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Tue, 8 Mar 2011 04:46:39 +0000]
Merge branch 's5p-fixes-for-linus' of git://git./linux/kernel/git/kgene/linux-samsung

* 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: S3C64XX: Update regulator names for debugfs compatiblity on SMDK6410
  ARM: S3C64XX: Fix build with WM1190 disabled and WM1192 enabled on SMDK6410
  ARM: S3C64XX: Reduce output of s3c64xx_dma_init1()
  ARM: S3C64XX: Tone down SDHCI debugging
  ARM: S3C64XX: Add clock for i2c1
  ARM: S3C64XX: Staticise non-exported GPIO to interrupt functions
  ARM: SAMSUNG: Include devs.h in dev-uart.c to prototype devices
  ARM: S3C64XX: Fix keypad setup to configure correct number of rows
  ARM: S3C2440: Fix usage gpio bank j pin definitions on GTA02
  ARM: S5P64X0: Fix number of GPIO lines in Bank F
  ARM: S3C2440: Select missing S3C_DEV_USB_HOST on GTA02

8 years agoMerge branch 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm
Linus Torvalds [Tue, 8 Mar 2011 04:45:42 +0000]
Merge branch 'fixes' of /home/rmk/linux-2.6-arm

* 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm:
  davinci: cpufreq: fix section mismatch warning
  DaVinci: fix compilation warnings in <mach/clkdev.h>
  davinci: tnetv107x: fix register indexing for GPIOs numbers > 31
  davinci: da8xx/omap-l1x: add platform device for davinci-pcm-audio
  ARM: pxa/tosa: register wm9712 codec device
  ARM: pxa: enable pxa-pcm-audio on pxa210/pxa25x platform
  ARM: pxa/colibri: don't register pxa2xx-pcmcia nodes on non-colibri platforms
  ARM: pxa/tosa: drop setting LED trigger name, as it's unsupported now
  ARM: 6762/1: Update number of VIC for S5P6442 and S5PC100
  ARM: 6761/1: Update number of VIC for S5PV210
  ARM: 6768/1: hw_breakpoint: ensure debug logic is powered up on v7 cores
  ARM: 6767/1: ptrace: fix register indexing in GETHBPREGS request
  ARM: 6765/1: remove obsolete comment from asm/mach/arch.h
  ARM: 6757/1: fix tlb.h induced linux/swap.h build failure

8 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc
Linus Torvalds [Tue, 8 Mar 2011 04:45:12 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/cjb/mmc

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc:
  mmc: sdio: Allow sdio operations in other threads during sdio_add_func()

8 years agoMerge branch 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied...
Linus Torvalds [Tue, 8 Mar 2011 04:43:55 +0000]
Merge branch 'drm-fixes' of git://git./linux/kernel/git/airlied/drm-2.6

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm: index i shadowed in 2nd loop
  drm/nv50-nvc0: prevent multiple vm/bar flushes occuring simultanenously
  drm/nouveau: fix regression causing ttm to not be able to evict vram
  drm/i915: Rebind the buffer if its alignment constraints changes with tiling
  drm/i915: Disable GPU semaphores by default
  drm/i915: Do not overflow the MMADDR write FIFO
  Revert "drm/i915: fix corruptions on i8xx due to relaxed fencing"

8 years agodrm: index i shadowed in 2nd loop
roel [Mon, 7 Mar 2011 17:00:34 +0000]
drm: index i shadowed in 2nd loop

Index i was already used in thhe first loop

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

8 years agommc: sdio: Allow sdio operations in other threads during sdio_add_func()
Dmitry Shmidt [Thu, 3 Mar 2011 22:40:10 +0000]
mmc: sdio: Allow sdio operations in other threads during sdio_add_func()

This fixes a bug introduced by 807e8e40673d ("mmc: Fix sd/sdio/mmc
initialization frequency retries") that prevented SDIO drivers from
performing SDIO commands in their probe routines -- the above patch
called mmc_claim_host() before sdio_add_func(), which causes a deadlock
if an external SDIO driver calls sdio_claim_host().

Fix tested on an OLPC XO-1.75 with libertas on SDIO.

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
Reviewed-and-Tested-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Chris Ball <cjb@laptop.org>

8 years agoMerge remote branch 'ickle/drm-intel-fixes' into drm-fixes
Dave Airlie [Mon, 7 Mar 2011 21:18:35 +0000]
Merge remote branch 'ickle/drm-intel-fixes' into drm-fixes

* ickle/drm-intel-fixes:
  drm/i915: Rebind the buffer if its alignment constraints changes with tiling
  drm/i915: Disable GPU semaphores by default
  drm/i915: Do not overflow the MMADDR write FIFO
  Revert "drm/i915: fix corruptions on i8xx due to relaxed fencing"

8 years agoMerge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Mon, 7 Mar 2011 21:15:02 +0000]
Merge branch 'omap-fixes-for-linus' of git://git./linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6:
  omap: mailbox: resolve hang issue
  OMAP2+: PM: SmartReflex: fix memory leaks in Smartreflex driver
  arm: mach-omap2: smartreflex: fix another memory leak

8 years agoMerge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6
Linus Torvalds [Mon, 7 Mar 2011 21:14:19 +0000]
Merge branch 'for-linus' of git://git390.marist.edu/linux-2.6

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
  [S390] tape: deadlock on system work queue
  [S390] keyboard: integer underflow bug
  [S390] xpram: remove __initdata attribute from module parameters

8 years agodrm/nv50-nvc0: prevent multiple vm/bar flushes occuring simultanenously
Ben Skeggs [Mon, 7 Mar 2011 07:18:04 +0000]
drm/nv50-nvc0: prevent multiple vm/bar flushes occuring simultanenously

The per-vm mutex doesn't prevent this completely, a flush coming from the
BAR VM could potentially happen at the same time as one for the channel
VM.  Not to mention that if/when we get per-client/channel VM, this will
happen far more frequently.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

8 years agodrm/nouveau: fix regression causing ttm to not be able to evict vram
Ben Skeggs [Mon, 7 Mar 2011 07:18:03 +0000]
drm/nouveau: fix regression causing ttm to not be able to evict vram

TTM assumes an error condition from man->func->get_node() means that
something went horribly wrong, and causes it to bail.

The driver is supposed to return 0, and leave mm_node == NULL to
signal that it couldn't allocate any memory.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

8 years agoASoC: Remove warnings in ep93xx-i2s.c
Alexander Sverdlin [Mon, 7 Mar 2011 17:29:58 +0000]
ASoC: Remove warnings in ep93xx-i2s.c

Remove warnings in ep93xx-i2s.c

Signed-off-by: Alexander Sverdlin <subaparts@yandex.ru>
Acked-by: Ryan Mallon <ryan@bluewatersys.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

8 years agoASoC: Extend range of supported sample rates for CS4271 CODEC.
Alexander Sverdlin [Mon, 7 Mar 2011 17:29:36 +0000]
ASoC: Extend range of supported sample rates for CS4271 CODEC.

Extend range of supported sample rates for CS4271 CODEC.

Signed-off-by: Alexander Sverdlin <subaparts@yandex.ru>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

8 years agoASoC: Add LM4857 to SND_SOC_ALL_CODECS
Mark Brown [Mon, 7 Mar 2011 12:23:10 +0000]
ASoC: Add LM4857 to SND_SOC_ALL_CODECS

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>

8 years agoASoC: Add driver for the dfbmcs320 bluetooth module
Lars-Peter Clausen [Mon, 7 Mar 2011 07:04:59 +0000]
ASoC: Add driver for the dfbmcs320 bluetooth module

This patch adds a codec driver for the dfbmcs320 bluetooth module, which is used
on the neo1973 boards.

The patch also modifies the neo1937_wm8753 sound board driver to use the new
driver instead of registering the bluetooth DAI manually.
Previously there was a name mismatch between the bluetooth DAI and the bluetooth
DAI link and the sound card was not instantiated, with this patch the issue is
no longer present and sound support works again.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

8 years agoASoC: Samsung: Merge neo1937_wm8753 and neo1973_gta02_wm8753 sound board driver
Lars-Peter Clausen [Mon, 7 Mar 2011 07:04:58 +0000]
ASoC: Samsung: Merge neo1937_wm8753 and neo1973_gta02_wm8753 sound board driver

The neo1973(GTA01) and neo1973_gta02(GTA02) have a very similar audio hardware
setup. They both use the same codec with the same routing to the gsm modem and
bluetooth chip. But they do use different AMPs though and there are some minor
differences in the speaker setup.

As a result most of the code of those two drivers is identical.
So from a maintenance point of view it makes sense to merge them into a single
driver. It also reduces the size of kernel images supporting both the GTA01 and
GTA02.

As a side-effect of this merge the GTA01 for example gains support for routing
audio to and from the bluetooth DAI.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

8 years agoASoC: neo1973_gta02_wm8753: Use gpio_request_array to request gpios
Lars-Peter Clausen [Mon, 7 Mar 2011 07:04:57 +0000]
ASoC: neo1973_gta02_wm8753: Use gpio_request_array to request gpios

Using gpio_request_array instead of requesting and setting up each gpio by hand
makes the code more readable and more compact.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

8 years agoASoC: neo1973_gta02_wm8753: Remove lm4853_{set,get}_state
Lars-Peter Clausen [Mon, 7 Mar 2011 07:04:56 +0000]
ASoC: neo1973_gta02_wm8753: Remove lm4853_{set,get}_state

This patch drops the lm4853_{set,get}_state functions and the "Amp State Switch"
control.
Those were noops which existed to maintain alsa state file compatibility. Since
the control names have changed due to internal changes in the ASoC core and
state file compatibility was broken anyway it makes sense to drop them.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

8 years agoASoC: neo1973_wm8753: Move lm4857 specefic code to its own module
Lars-Peter Clausen [Mon, 7 Mar 2011 07:04:55 +0000]
ASoC: neo1973_wm8753: Move lm4857 specefic code to its own module

This patch moves the code for the lm4857 AMP from the neo1973_wm8753 sound
board driver to its own module.
The lm4857 is a generic AMP IC and not specific to the neo1973.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

8 years agoASoC: neo1973_wm8753: Remove scenario management code.
Lars-Peter Clausen [Mon, 7 Mar 2011 07:04:54 +0000]
ASoC: neo1973_wm8753: Remove scenario management code.

It has been proven to be inflexible to do scenario management in kernel space.

Since actual neo1973 board support has not been merged in mainline and this
patch has been in the neo1973 tree for some time now it should be safe to remove
this functionality without breaking existing userspace.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

8 years agoASoC: Add machine driver for Visstrim_M10 board.
Javier Martin [Mon, 7 Mar 2011 07:47:09 +0000]
ASoC: Add machine driver for Visstrim_M10 board.

Visstrim_M10 boards have an external tlcv320aic3205 codec
attached to SSI1. This driver glues together both interfaces.
External amplifier is not supported in this first version.

Signed-off-by: Javier Martin <javier.martin@vista-silicon.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

8 years agoASoC: Constify i2c_device_id table
Axel Lin [Fri, 4 Mar 2011 07:22:03 +0000]
ASoC: Constify i2c_device_id table

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Alexander Sverdlin <subaparts@yandex.ru>
Acked-by: Timur Tabi <timur@freescale.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

8 years agoASoC: tlv320dac33: add MODULE_DEVICE_TABLE
Axel Lin [Fri, 4 Mar 2011 07:18:18 +0000]
ASoC: tlv320dac33: add MODULE_DEVICE_TABLE

The device table is required to load modules based on modaliases.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

8 years agoASoC: Add missing debugfs conditionals
Mark Brown [Mon, 7 Mar 2011 11:09:25 +0000]
ASoC: Add missing debugfs conditionals

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>

8 years agoASoC: Fix outdated API usage in tlv320aic32x4
Mark Brown [Mon, 7 Mar 2011 11:07:24 +0000]
ASoC: Fix outdated API usage in tlv320aic32x4

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>

8 years agodrm/i915: Rebind the buffer if its alignment constraints changes with tiling
Chris Wilson [Mon, 7 Mar 2011 10:42:03 +0000]
drm/i915: Rebind the buffer if its alignment constraints changes with tiling

Early gen3 and gen2 chipset do not have the relaxed per-surface tiling
constraints of the later chipsets, so we need to check that the GTT
alignment is correct for the new tiling. If it is not, we need to
rebind.

Reported-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

8 years agodrm/i915: Disable GPU semaphores by default
Chris Wilson [Fri, 4 Mar 2011 18:48:03 +0000]
drm/i915: Disable GPU semaphores by default

Andi Kleen narrowed his GPU hangs on his Sugar Bay (SNB desktop) rev 09
down to the use of GPU semaphores, and we already know that they appear
broken up to Huron River (mobile) rev 08. (I'm optimistic that disabling
GPU semaphores is simply hiding another bug by the latency and
side-effects of the additional device interaction it introduces...)

However, use of semaphores is a massive performance improvement... Only
as long as the system remains stable. Enable at your peril.

Reported-by: Andi Kleen <andi-fd@firstfloor.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=33921
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

8 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
Linus Torvalds [Sun, 6 Mar 2011 18:44:49 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: hda - Don't set to D3 in Cirrus errata init verbs
  ALSA: hda - add new Fermi 5xx codec IDs to snd-hda
  ASoC: WM8994: Ensure late enable events are processed for the ADCs
  ASoC: WM8994: Don't disable the AIF[1|2]CLK_ENA unconditionaly
  ASoC: Fix WM9081 platform data initialisation
  ALSA: hda - Fix unable to record issue on ASUS N82JV
  ALSA: HDA: Realtek: Fixup jack detection to input subsystem

8 years agovirtio: console: Don't access vqs if device was unplugged
Amit Shah [Fri, 4 Mar 2011 03:34:33 +0000]
virtio: console: Don't access vqs if device was unplugged

If a virtio-console device gets unplugged while a port is open, a
subsequent close() call on the port accesses vqs to free up buffers.
This can lead to a crash.

The buffers are already freed up as a result of the call to
unplug_ports() from virtcons_remove().  The fix is to simply not access
vq information if port->portdev is NULL.

Reported-by: juzhang <juzhang@redhat.com>
CC: stable@kernel.org
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoMerge branch 'fix/asoc' into for-linus
Takashi Iwai [Sun, 6 Mar 2011 11:37:42 +0000]
Merge branch 'fix/asoc' into for-linus

8 years agodrm/i915: Do not overflow the MMADDR write FIFO
Chris Wilson [Fri, 4 Mar 2011 19:22:40 +0000]
drm/i915: Do not overflow the MMADDR write FIFO

Whilst the GT is powered down (rc6), writes to MMADDR are placed in a
FIFO by the System Agent. This is a limited resource, only 64 entries, of
which 20 are reserved for Display and PCH writes, and so we must take
care not to queue up too many writes. To avoid this, there is counter
which we can poll to ensure there are sufficient free entries in the
fifo.

"Issuing a write to a full FIFO is not supported; at worst it could
result in corruption or a system hang."

Reported-and-Tested-by: Matt Turner <mattst88@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=34056
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

8 years agoRevert "drm/i915: fix corruptions on i8xx due to relaxed fencing"
Chris Wilson [Sun, 6 Mar 2011 09:03:16 +0000]
Revert "drm/i915: fix corruptions on i8xx due to relaxed fencing"

This reverts commit c2e0eb167070a6e9dcb49c84c13c79a30d672431.

As it turns out, userspace already depends upon being able to enable
tiling on existing bo which it promises to be large enough for its
purposes i.e. it will not access beyond the end of the last full-tile
row.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=35016
Reported-and-tested-by: Kamal Mostafa <kamal@canonical.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

8 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph...
Linus Torvalds [Sat, 5 Mar 2011 18:43:22 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/sage/ceph-client

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  ceph: no .snap inside of snapped namespace
  libceph: fix msgr standby handling
  libceph: fix msgr keepalive flag
  libceph: fix msgr backoff
  libceph: retry after authorization failure
  libceph: fix handling of short returns from get_user_pages
  ceph: do not clear I_COMPLETE from d_release
  ceph: do not set I_COMPLETE
  Revert "ceph: keep reference to parent inode on ceph_dentry"

8 years agomm: use correct numa policy node for transparent hugepages
Andi Kleen [Sat, 5 Mar 2011 01:36:32 +0000]
mm: use correct numa policy node for transparent hugepages

Pass down the correct node for a transparent hugepage allocation.  Most
callers continue to use the current node, however the hugepaged daemon
now uses the previous node of the first to be collapsed page instead.
This ensures that khugepaged does not mess up local memory for an
existing process which uses local policy.

The choice of node is somewhat primitive currently: it just uses the
node of the first page in the pmd range.  An alternative would be to
look at multiple pages and use the most popular node.  I used the
simplest variant for now which should work well enough for the case of
all pages being on the same node.

[akpm@linux-foundation.org: coding-style fixes]
Acked-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agomm: preserve original node for transparent huge page copies
Andi Kleen [Sat, 5 Mar 2011 01:36:31 +0000]
mm: preserve original node for transparent huge page copies

This makes a difference for LOCAL policy, where the node cannot be
determined from the policy itself, but has to be gotten from the original
page.

Acked-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agomm: add alloc_page_vma_node()
Andi Kleen [Sat, 5 Mar 2011 01:36:30 +0000]
mm: add alloc_page_vma_node()

Add a alloc_page_vma_node that allows passing the "local" node in.  Used
in a followon patch.

Acked-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agomm: change alloc_pages_vma to pass down the policy node for local policy
Andi Kleen [Sat, 5 Mar 2011 01:36:29 +0000]
mm: change alloc_pages_vma to pass down the policy node for local policy

Currently alloc_pages_vma() always uses the local node as policy node for
the LOCAL policy.  Pass this node down as an argument instead.

No behaviour change from this patch, but will be needed for followons.

Acked-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoRapidIO: Update MAINTAINERS
Alexandre Bounine [Sat, 5 Mar 2011 01:36:28 +0000]
RapidIO: Update MAINTAINERS

Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agodrivers/video/backlight/ltv350qv.c: fix a memory leak
Axel Lin [Sat, 5 Mar 2011 01:36:27 +0000]
drivers/video/backlight/ltv350qv.c: fix a memory leak

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoMAINTAINERS: add maintainer of Samsung Mobile Machine support
Kyungmin Park [Sat, 5 Mar 2011 01:36:26 +0000]
MAINTAINERS: add maintainer of Samsung Mobile Machine support

Add maintainer of Samsung Mobile machine support.  Currently, Aquila,
Goni, Universal (C210), and Nuri board are supported.

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Joe Perches <joe@perches.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agopps: make pps_gen_parport depend on BROKEN
Thomas Gleixner [Sat, 5 Mar 2011 01:36:23 +0000]
pps: make pps_gen_parport depend on BROKEN

This driver causes hard lockups, when the active clock soure is jiffies.

The reason is that it loops with interrupts disabled waiting for a
timestamp to be reached by polling getnstimeofday().  Though with a
jiffies clocksource, when that code runs on the same CPU which is
responsible for updating jiffies, then we loop in circles for ever
simply because the timer interrupt cannot update jiffies.  So both UP
and SMP can be affected.

There is no easy fix for that problem so make it depend on BROKEN for
now.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Cc: Rodolfo Giometti <giometti@linux.it>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agodrivers/misc/bmp085.c: add MODULE_DEVICE_TABLE
Axel Lin [Sat, 5 Mar 2011 01:36:22 +0000]
drivers/misc/bmp085.c: add MODULE_DEVICE_TABLE

The device table is required to load modules based on modaliases.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Cc: Shubhrajyoti D <shubhrajyoti@ti.com>
Cc: Christoph Mair <christoph.mair@gmail.com>
Cc: Jonathan Cameron <jic23@cam.ac.uk>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agocpuset: add a missing unlock in cpuset_write_resmask()
Li Zefan [Sat, 5 Mar 2011 01:36:21 +0000]
cpuset: add a missing unlock in cpuset_write_resmask()

Don't forget to release cgroup_mutex if alloc_trial_cpuset() fails.

[akpm@linux-foundation.org: avoid multiple return points]
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Miao Xie <miaox@cn.fujitsu.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agodrivers/rtc/rtc-s3c.c: fix prototype for s3c_rtc_setaie()
Axel Lin [Sat, 5 Mar 2011 01:36:19 +0000]
drivers/rtc/rtc-s3c.c: fix prototype for s3c_rtc_setaie()

Fix s3c_rtc_setaie() prototype to eliminate the following compile
warning:

  drivers/rtc/rtc-s3c.c:383: warning: initialization from incompatible pointer type

(akpm: the rtc_class_ops.alarm_irq_enable() handler is being passed two
arguments where it expects just one, presumably with undesired effects)

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier...
Linus Torvalds [Sat, 5 Mar 2011 01:31:43 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/vapier/blackfin

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin:
  Blackfin: iflush: update anomaly 05000491 workaround
  Blackfin: outs[lwb]: make sure count is greater than 0

8 years agoMerge branch 'rmobile-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sat, 5 Mar 2011 01:31:19 +0000]
Merge branch 'rmobile-fixes-for-linus' of git://git./linux/kernel/git/lethal/sh-2.6

* 'rmobile-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  ARM: mach-shmobile: mackerel: modify LCDC clock divider value
  ARM: mach-shmobile: ap4evb: modify LCDC clock divider value
  ARM: mach-shmobile: mackerel: fixup memory initialize for zboot
  ARM: mach-shmobile: ap4evb: fixup memory initialize for zboot
  ARM: mach-shmobile: Add sh73a0 MIPI-CSI and CEU clocks
  ARM: mach-shmobile: AG5EVM MIPI-DSI LCD reset delay fix

8 years agoMerge branch 'sh-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Sat, 5 Mar 2011 01:31:01 +0000]
Merge branch 'sh-fixes-for-linus' of git://git./linux/kernel/git/lethal/sh-2.6

* 'sh-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  sh: Change __nosave_XXX symbols to long
  sh: Flush executable pages in copy_user_highpage
  sh: Ensure ST40-300 BogoMIPS value is consistent
  sh: sh7750: Fix incompatible pointer type
  sh: sh7750: move machtypes.h to include/generated

8 years agoMerge branch 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied...
Linus Torvalds [Sat, 5 Mar 2011 01:30:32 +0000]
Merge branch 'drm-fixes' of git://git./linux/kernel/git/airlied/drm-2.6

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/nouveau: allocate kernel's notifier object at end of block

8 years agonfs4: Ensure that ACL pages sent over NFS were not allocated from the slab (v3)
Neil Horman [Sat, 5 Mar 2011 00:26:03 +0000]
nfs4: Ensure that ACL pages sent over NFS were not allocated from the slab (v3)

The "bad_page()" page allocator sanity check was reported recently (call
chain as follows):

  bad_page+0x69/0x91
  free_hot_cold_page+0x81/0x144
  skb_release_data+0x5f/0x98
  __kfree_skb+0x11/0x1a
  tcp_ack+0x6a3/0x1868
  tcp_rcv_established+0x7a6/0x8b9
  tcp_v4_do_rcv+0x2a/0x2fa
  tcp_v4_rcv+0x9a2/0x9f6
  do_timer+0x2df/0x52c
  ip_local_deliver+0x19d/0x263
  ip_rcv+0x539/0x57c
  netif_receive_skb+0x470/0x49f
  :virtio_net:virtnet_poll+0x46b/0x5c5
  net_rx_action+0xac/0x1b3
  __do_softirq+0x89/0x133
  call_softirq+0x1c/0x28
  do_softirq+0x2c/0x7d
  do_IRQ+0xec/0xf5
  default_idle+0x0/0x50
  ret_from_intr+0x0/0xa
  default_idle+0x29/0x50
  cpu_idle+0x95/0xb8
  start_kernel+0x220/0x225
  _sinittext+0x22f/0x236

It occurs because an skb with a fraglist was freed from the tcp
retransmit queue when it was acked, but a page on that fraglist had
PG_Slab set (indicating it was allocated from the Slab allocator (which
means the free path above can't safely free it via put_page.

We tracked this back to an nfsv4 setacl operation, in which the nfs code
attempted to fill convert the passed in buffer to an array of pages in
__nfs4_proc_set_acl, which gets used by the skb->frags list in
xs_sendpages.  __nfs4_proc_set_acl just converts each page in the buffer
to a page struct via virt_to_page, but the vfs allocates the buffer via
kmalloc, meaning the PG_slab bit is set.  We can't create a buffer with
kmalloc and free it later in the tcp ack path with put_page, so we need
to either:

1) ensure that when we create the list of pages, no page struct has
   PG_Slab set

 or

2) not use a page list to send this data

Given that these buffers can be multiple pages and arbitrarily sized, I
think (1) is the right way to go.  I've written the below patch to
allocate a page from the buddy allocator directly and copy the data over
to it.  This ensures that we have a put_page free-able page for every
entry that winds up on an skb frag list, so it can be safely freed when
the frame is acked.  We do a put page on each entry after the
rpc_call_sync call so as to drop our own reference count to the page,
leaving only the ref count taken by tcp_sendpages.  This way the data
will be properly freed when the ack comes in

Successfully tested by myself to solve the above oops.

Note, as this is the result of a setacl operation that exceeded a page
of data, I think this amounts to a local DOS triggerable by an
uprivlidged user, so I'm CCing security on this as well.

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
CC: Trond Myklebust <Trond.Myklebust@netapp.com>
CC: security@kernel.org
CC: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoceph: no .snap inside of snapped namespace
Sage Weil [Thu, 3 Mar 2011 21:44:35 +0000]
ceph: no .snap inside of snapped namespace

Otherwise you can do things like

# mkdir .snap/foo
# cd .snap/foo/.snap
# ls
<badness>

Signed-off-by: Sage Weil <sage@newdream.net>

8 years agolibceph: fix msgr standby handling
Sage Weil [Fri, 4 Mar 2011 20:25:05 +0000]
libceph: fix msgr standby handling

The standby logic used to be pretty dependent on the work requeueing
behavior that changed when we switched to WQ_NON_REENTRANT.  It was also
very fragile.

Restructure things so that:
 - We clear WRITE_PENDING when we set STANDBY.  This ensures we will
   requeue work when we wake up later.
 - con_work backs off if STANDBY is set.  There is nothing to do if we are
   in standby.
 - clear_standby() helper is called by both con_send() and con_keepalive(),
   the two actions that can wake us up again.  Move the connect_seq++
   logic here.

Signed-off-by: Sage Weil <sage@newdream.net>

8 years agolibceph: fix msgr keepalive flag
Sage Weil [Thu, 3 Mar 2011 18:10:15 +0000]
libceph: fix msgr keepalive flag

There was some broken keepalive code using a dead variable.  Shift to using
the proper bit flag.

Signed-off-by: Sage Weil <sage@newdream.net>

8 years agolibceph: fix msgr backoff
Sage Weil [Fri, 4 Mar 2011 20:24:28 +0000]
libceph: fix msgr backoff

With commit f363e45f we replaced a bunch of hacky workqueue mutual
exclusion logic with the WQ_NON_REENTRANT flag.  One pieces of fallout is
that the exponential backoff breaks in certain cases:

 * con_work attempts to connect.
 * we get an immediate failure, and the socket state change handler queues
   immediate work.
 * con_work calls con_fault, we decide to back off, but can't queue delayed
   work.

In this case, we add a BACKOFF bit to make con_work reschedule delayed work
next time it runs (which should be immediately).

Signed-off-by: Sage Weil <sage@newdream.net>

8 years agoMAINTAINERS: Update shaggy's email address
Dave Kleikamp [Fri, 4 Mar 2011 16:13:47 +0000]
MAINTAINERS: Update shaggy's email address

Signed-off-by: Dave Kleikamp <shaggy@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoASoC: Add TI tlv320aic32x4 codec support.
Javier Martin [Wed, 2 Mar 2011 13:52:32 +0000]
ASoC: Add TI tlv320aic32x4 codec support.

This patch adds support for tlv320aic3205 and tlv320aic3254 codecs.
It doesn't include miniDSP support for aic3254.

Signed-off-by: Javier Martin <javier.martin@vista-silicon.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

8 years agoMark ptrace_{traceme,attach,detach} static
Linus Torvalds [Fri, 4 Mar 2011 17:23:30 +0000]
Mark ptrace_{traceme,attach,detach} static

They are only used inside kernel/ptrace.c, and have been for a long
time.  We don't want to go back to the bad-old-days when architectures
did things on their own, so make them static and private.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoARM: S3C64XX: Update regulator names for debugfs compatiblity on SMDK6410
Mark Brown [Thu, 3 Mar 2011 23:24:15 +0000]
ARM: S3C64XX: Update regulator names for debugfs compatiblity on SMDK6410

The debugfs support added to the regulator API (which has been merged
in during this merge window) creates directories for regulators named
after the display names for the regulators so replace / as a separator
for multiple supplies with + in the SMDK6410 machine.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

8 years agoARM: S3C64XX: Fix build with WM1190 disabled and WM1192 enabled on SMDK6410
Mark Brown [Thu, 3 Mar 2011 22:59:20 +0000]
ARM: S3C64XX: Fix build with WM1190 disabled and WM1192 enabled on SMDK6410

Avoid relying on implicit inclusion of machine.h

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

8 years agoARM: S3C64XX: Reduce output of s3c64xx_dma_init1()
Ben Dooks [Thu, 3 Mar 2011 22:55:44 +0000]
ARM: S3C64XX: Reduce output of s3c64xx_dma_init1()

Reduce the logging output of s3c64xx_dma_init1() as it is not useful
for normal bootup (and we get an overall indication of the registration
of the PL180 DMA block).

This removes the following output from the log:

s3c64xx_dma_init1: registering DMA 0 (e0808100)
s3c64xx_dma_init1: registering DMA 1 (e0808120)
s3c64xx_dma_init1: registering DMA 2 (e0808140)
s3c64xx_dma_init1: registering DMA 3 (e0808160)
s3c64xx_dma_init1: registering DMA 4 (e0808180)
s3c64xx_dma_init1: registering DMA 5 (e08081a0)
s3c64xx_dma_init1: registering DMA 6 (e08081c0)
s3c64xx_dma_init1: registering DMA 7 (e08081e0)

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

8 years agoARM: S3C64XX: Tone down SDHCI debugging
Mark Brown [Thu, 3 Mar 2011 22:55:44 +0000]
ARM: S3C64XX: Tone down SDHCI debugging

The MMC core calls s3c6400_setup_sdhcp_cfg_card() very frequently, causing
the log message in there at KERN_INFO to be displayed a lot which is slow
and overly chatty. Convert the message into a pr_debug() to tone this down.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

8 years agoARM: S3C64XX: Add clock for i2c1
Ben Dooks [Thu, 3 Mar 2011 22:55:44 +0000]
ARM: S3C64XX: Add clock for i2c1

The clock for i2c1 has been missing for a while, add it to the list of
clocks for the system and ensure it is initialised at startup.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

8 years agoARM: S3C64XX: Staticise non-exported GPIO to interrupt functions
Mark Brown [Thu, 3 Mar 2011 22:55:44 +0000]
ARM: S3C64XX: Staticise non-exported GPIO to interrupt functions

No need to put these in the global namespace and sparse gets upset.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

8 years agoARM: SAMSUNG: Include devs.h in dev-uart.c to prototype devices
Mark Brown [Thu, 3 Mar 2011 22:55:44 +0000]
ARM: SAMSUNG: Include devs.h in dev-uart.c to prototype devices

Ensures that the declaration agrees with the definition and makes sparse
happy.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

8 years agoARM: S3C64XX: Fix keypad setup to configure correct number of rows
Ben Dooks [Wed, 2 Mar 2011 06:19:15 +0000]
ARM: S3C64XX: Fix keypad setup to configure correct number of rows

The call to s3c_gpio_cfgrange_nopull() takes a size and base
but this looks like it is trying to do base and end. This means
it is configuring too many GPIOs and on the case of the Cragganmore
means we're seeing an overflow of the ROW pins causing problems
with the keyboard driver.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

8 years agoARM: S3C2440: Fix usage gpio bank j pin definitions on GTA02
Lars-Peter Clausen [Mon, 28 Feb 2011 11:20:53 +0000]
ARM: S3C2440: Fix usage gpio bank j pin definitions on GTA02

The gta02 header file still uses the old S3C2410_GPJx defines instead of the
S3C2410_GPJ(x) macro. Since the S3C2410_GPJx defines have already been removed
this causes the following build failure:

sound/soc/samsung/neo1973_wm8753.c: In function 'lm4853_set_spk':
sound/soc/samsung/neo1973_wm8753.c:259: error: 'S3C2440_GPJ2' undeclared (first use in this function)
sound/soc/samsung/neo1973_wm8753.c:259: error: (Each undeclared identifier is reported only once
sound/soc/samsung/neo1973_wm8753.c:259: error: for each function it appears in.)
sound/soc/samsung/neo1973_wm8753.c: In function 'lm4853_get_spk':
sound/soc/samsung/neo1973_wm8753.c:267: error: 'S3C2440_GPJ2' undeclared (first use in this function)
sound/soc/samsung/neo1973_wm8753.c: In function 'lm4853_event':
sound/soc/samsung/neo1973_wm8753.c:276: error: 'S3C2440_GPJ1' undeclared (first use in this function)
sound/soc/samsung/neo1973_wm8753.c: At top level:
sound/soc/samsung/neo1973_wm8753.c:439: error: 'S3C2440_GPJ2' undeclared here (not in a function)
sound/soc/samsung/neo1973_wm8753.c:440: error: 'S3C2440_GPJ1' undeclared here (not in a function)

This patches fixes the issue by doing a s,S3C2410_GPJ([\d]+),S3C2410_GPJ(\1),g
on the file.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>