8 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirel...
John W. Linville [Fri, 8 Jul 2011 15:03:36 +0000]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless-next-2.6 into for-davem

8 years agort2x00: Implement tx_frames_pending mac80211 callback function.
Gertjan van Wingerde [Wed, 6 Jul 2011 21:00:21 +0000]
rt2x00: Implement tx_frames_pending mac80211 callback function.

Implementing this callback function will cause mac80211 refrain from
going to powersave state when there are still untransmitted TX frames
in the queues.
This would exactly mimic the behaviour of the legacy vendor driver which
also doesn't go in powersave mode if there are still TX frames that are not
transmitted.
This should make powersaving and rt2x00 a better couple.

Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agort2x00: Properly identify rt2800usb devices.
Gertjan van Wingerde [Wed, 6 Jul 2011 20:59:19 +0000]
rt2x00: Properly identify rt2800usb devices.

Sitecom WLA4000 (USB ID 0x0df6:0x0060) is an RT3072 chipset.
Sitecom WLA5000 (USB ID 0x0df6:0x0062) is an RT3572 chipset.

Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agort2x00: Add device ID for RT539F device.
Gertjan van Wingerde [Wed, 6 Jul 2011 20:58:55 +0000]
rt2x00: Add device ID for RT539F device.

Reported-by: Wim Vander Schelden <wim@fixnum.org>
Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agort2x00: Reduce window of a queue's tx lock.
Gertjan van Wingerde [Wed, 6 Jul 2011 20:57:37 +0000]
rt2x00: Reduce window of a queue's tx lock.

Currently a lot of actions that can be done without the queue's tx lock
being held are done inside the locked area.
Move them out to have a leaner and meaner code that operates while the
tx lock is being held.

Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agort2x00: Don't use queue entry as parameter when creating TX descriptor.
Gertjan van Wingerde [Wed, 6 Jul 2011 20:57:00 +0000]
rt2x00: Don't use queue entry as parameter when creating TX descriptor.

The functions that create the tx descriptor structure do not operate on
a queue entry at all. Signal this fact in the code by not providing a
queue entry as a parameter, but the rt2x00 device structure and the skb
directly.

This patch is a preparation for reducing the time a queue is locked for
a tx operation.

Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agort2x00: Serialize TX operations on a queue.
Gertjan van Wingerde [Wed, 6 Jul 2011 20:56:24 +0000]
rt2x00: Serialize TX operations on a queue.

The rt2x00 driver gets frequent occurrences of the following error message
when operating under load:
phy0 -> rt2x00queue_write_tx_frame: Error - Arrived at non-free entry in the
non-full queue 2.

This is caused by simultaneous attempts from mac80211 to send a frame via
rt2x00, which are not properly serialized inside rt2x00queue_write_tx_frame,
causing the second frame to fail sending with the above mentioned error
message.

Fix this by introducing a per-queue spinlock to serialize the TX operations
on that queue.

Reported-by: Andreas Hartmann <andihartmann@01019freenet.de>
Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agobcma: detect PCI core working in hostmode
Rafał Miłecki [Tue, 5 Jul 2011 17:48:26 +0000]
bcma: detect PCI core working in hostmode

We must not init it like clientmode one, it would break device (tested
by Hauke on BCM4718). Add stub hostmode driver for now.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agopacket: Fix build with INET disabled.
David S. Miller [Thu, 7 Jul 2011 15:18:04 +0000]
packet: Fix build with INET disabled.

af_packet.c:(.text+0x3d130): undefined reference to `ip_defrag'
or
ERROR: "ip_defrag" [net/packet/af_packet.ko] undefined!

Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoaf_packet: lock imbalance
Eric Dumazet [Thu, 7 Jul 2011 13:41:29 +0000]
af_packet: lock imbalance

fanout_add() might return with fanout_mutex held.

Reduce indentation level while we are at it

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agosky2: use GFP_KERNEL allocations at device setup
Eric Dumazet [Thu, 7 Jul 2011 13:13:32 +0000]
sky2: use GFP_KERNEL allocations at device setup

In process and sleep allowed context, favor GFP_KERNEL allocations over
GFP_ATOMIC ones.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agobnx2x: Add dcbnl notification
Shmulik Ravid [Thu, 7 Jul 2011 12:11:30 +0000]
bnx2x: Add dcbnl notification

This patch adds a dcbnl notification to the bnx2x. The notification is
sent to user mode clients following a change in the dcb negotiated
parameters as resolved by the embedded DCBX stack.

Signed-off-by: Shmulik Ravid <shmulikr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agolib/checksum.c: optimize do_csum a bit
Ian Abbott [Thu, 7 Jul 2011 01:18:49 +0000]
lib/checksum.c: optimize do_csum a bit

Reduce the number of variables modified by the loop in do_csum() by 1,
which seems like a good idea.  On Nios II (a RISC CPU with 3-operand
instruction set) it reduces the loop from 7 to 6 instructions, including
the conditional branch.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agomacvtap: macvtapTX zero-copy support
Shirley Ma [Wed, 6 Jul 2011 12:26:11 +0000]
macvtap: macvtapTX zero-copy support

Only 128 bytes is copied, the rest of data is DMA mapped directly from
userspace.

Signed-off-by: Shirley Ma <xma@...ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoskbuff: skb supports zero-copy buffers
Shirley Ma [Wed, 6 Jul 2011 12:22:12 +0000]
skbuff: skb supports zero-copy buffers

This patch adds userspace buffers support in skb shared info. A new
struct skb_ubuf_info is needed to maintain the userspace buffers
argument and index, a callback is used to notify userspace to release
the buffers once lower device has done DMA (Last reference to that skb
has gone).

If there is any userspace apps to reference these userspace buffers,
then these userspaces buffers will be copied into kernel. This way we
can prevent userspace apps from holding these userspace buffers too long.

Use destructor_arg to point to the userspace buffer info; a new tx flags
SKBTX_DEV_ZEROCOPY is added for zero-copy buffer check.

Signed-off-by: Shirley Ma <xma@...ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agosock.h: Add a new sock zero-copy flag
Shirley Ma [Wed, 6 Jul 2011 12:17:30 +0000]
sock.h: Add a new sock zero-copy flag

Signed-off-by: Shirley Ma <xma@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agogianfar v2: code cleanups
Sebastian Poehn [Thu, 7 Jul 2011 11:30:29 +0000]
gianfar v2: code cleanups

This patch:
# improves readability of some gianfar nfc code

Signed-off-by: Sebastian Poehn <sebastian.poehn@belden.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoDisable router anycast address for /127 prefixes
Bjørn Mork [Tue, 5 Jul 2011 23:04:13 +0000]
Disable router anycast address for /127 prefixes

RFC 6164 requires that routers MUST disable Subnet-Router anycast
for the prefix when /127 prefixes are used.

No need for matching code in addrconf_leave_anycast() as it
will silently ignore any attempt to leave an unknown anycast
address.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agorose: Delete commented out references to ancient firewalling code.
David S. Miller [Thu, 7 Jul 2011 09:41:59 +0000]
rose: Delete commented out references to ancient firewalling code.

These intefaces haven't existed since 2.2.x

Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoskge: update version
stephen hemminger [Wed, 6 Jul 2011 19:00:08 +0000]
skge: update version

Update version number, and take "New" off the config information
since old sk98lin has been gone for a couple years.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoskge: make support for old Genesis chips optional
stephen hemminger [Wed, 6 Jul 2011 19:00:07 +0000]
skge: make support for old Genesis chips optional

The GENESIS boards are really old PCI-X boards that are rare.
Marvell has dropped support for this hardware and there is no reason
for most users to have to have this code.

Rather than riddling code with ifdef's make one macro and let
the compiler do the dead code elimination.  This saves about 15%
of the text size.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoadd pci-id for DGE-530T
stephen hemminger [Wed, 6 Jul 2011 19:00:06 +0000]
add pci-id for DGE-530T

See also: https://bugzilla.kernel.org/show_bug.cgi?id=38862

Reported-by: jameshenderson@ruggedcom.com

Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoskge: cleanup pci id table
stephen hemminger [Wed, 6 Jul 2011 19:00:05 +0000]
skge: cleanup pci id table

The PCI table was using mix of defines for device id and hard coded
hex values. This patch change it to all hex values. It also adds
comments based on the names provided in the vendor driver table.

There is NO CHANGE to the actual resulting table.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonet: doc: fix compile warning of no format arguments in ifenslave.c
Shan Wei [Thu, 7 Jul 2011 07:27:49 +0000]
net: doc: fix compile warning of no format arguments in ifenslave.c

Fix following warning in ifenslave.c with gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu4).

Documentation/networking/ifenslave.c:263:4: warning: format not a string literal and no format arguments
Documentation/networking/ifenslave.c:271:3: warning: format not a string literal and no format arguments
Documentation/networking/ifenslave.c:277:3: warning: format not a string literal and no format arguments
Documentation/networking/ifenslave.c:285:3: warning: format not a string literal and no format arguments
Documentation/networking/ifenslave.c:291:3: warning: format not a string literal and no format arguments
Documentation/networking/ifenslave.c:292:3: warning: format not a string literal and no format arguments
Documentation/networking/ifenslave.c:312:4: warning: format not a string literal and no format arguments
Documentation/networking/ifenslave.c:323:3: warning: format not a string literal and no format arguments
Documentation/networking/ifenslave.c:342:4: warning: format not a string literal and no format arguments

Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonet: fix warning of versioncheck
Shan Wei [Thu, 7 Jul 2011 07:26:31 +0000]
net: fix warning of versioncheck

net-next-2.6/drivers/net/bnx2x/bnx2x_sp.c: 19 linux/version.h not needed.
net-next-2.6/drivers/net/caif/caif_hsi.c: 9 linux/version.h not needed.

Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agomwifiex: modify SDIO aggregation Tx/Rx buffer size
Amitkumar Karwar [Wed, 6 Jul 2011 01:01:11 +0000]
mwifiex: modify SDIO aggregation Tx/Rx buffer size

The SDIO aggregation buffer size has been modified to an optimum
value which gives good throughput results.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agoipw2100: Fix command list for debugging
Jean Delvare [Tue, 5 Jul 2011 22:27:06 +0000]
ipw2100: Fix command list for debugging

There is a stray "undefined" string in the array, get rid of it.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: "John W. Linville" <linville@tuxdriver.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agomac80211: support GTK rekey offload
Johannes Berg [Tue, 5 Jul 2011 14:35:41 +0000]
mac80211: support GTK rekey offload

This adds the necessary mac80211 APIs to support
GTK rekey offload, mirroring the functionality
from cfg80211.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agocfg80211/nl80211: support GTK rekey offload
Johannes Berg [Tue, 5 Jul 2011 14:35:40 +0000]
cfg80211/nl80211: support GTK rekey offload

In certain circumstances, like WoWLAN scenarios,
devices may implement (partial) GTK rekeying on
the device to avoid waking up the host for it.

In order to successfully go through GTK rekeying,
the KEK, KCK and the replay counter are required.

Add API to let the supplicant hand the parameters
to the driver which may store it for future GTK
rekey operations.

Note that, of course, if GTK rekeying is done by
the device, the EAP frame must not be passed up
to userspace, instead a rekey event needs to be
sent to let userspace update its replay counter.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agomac80211: allow driver to iterate keys
Johannes Berg [Tue, 5 Jul 2011 14:35:39 +0000]
mac80211: allow driver to iterate keys

When in suspend/wowlan, devices might implement crypto
offload differently (more features), and might require
reprogramming keys for the WoWLAN (as it is the case
for Intel devices that use another uCode image). Thus
allow the driver to iterate all keys in this context.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agoiwlwifi: remove unnecessary read of PCI_CAP_ID_EXP
Jon Mason [Thu, 30 Jun 2011 15:42:47 +0000]
iwlwifi: remove unnecessary read of PCI_CAP_ID_EXP

The PCIE capability offset is saved during PCI bus walking.  It will
remove an unnecessary search in the PCI configuration space if this
value is referenced instead of reacquiring it.

Signed-off-by: Jon Mason <jdmason@kudzu.us>
Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agoMerge branch 'for-linville' of git://git.kernel.org/pub/scm/linux/kernel/git/luca...
John W. Linville [Wed, 6 Jul 2011 19:03:16 +0000]
Merge branch 'for-linville' of git://git./linux/kernel/git/luca/wl12xx

8 years agopacket: Fix leak in pre-defrag support.
David S. Miller [Wed, 6 Jul 2011 14:30:59 +0000]
packet: Fix leak in pre-defrag support.

When we clone the SKB, we forget about the original
one.  Avoid this problem by using skb_share_check().

Reported-by: Penttilä Mika <mika.penttila@ixonos.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonet: sched: constify tcf_proto and tc_action
Eric Dumazet [Tue, 5 Jul 2011 23:25:42 +0000]
net: sched: constify tcf_proto and tc_action

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agopacket: Add 'cpu' fanout policy.
David S. Miller [Wed, 6 Jul 2011 08:56:38 +0000]
packet: Add 'cpu' fanout policy.

Unfortunately we have to use a real modulus here as
the multiply trick won't work as effectively with cpu
numbers as it does with rxhash values.

Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoveth: Kill unused tx_dropped
Eric Dumazet [Wed, 6 Jul 2011 08:51:04 +0000]
veth: Kill unused tx_dropped

Followup to commit f82528bc13a (Exclude duplicated checking for
iface-up) : We no longer need percpu tx_dropped field.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoveth: Kill unused code label and code block.
David S. Miller [Wed, 6 Jul 2011 06:49:03 +0000]
veth: Kill unused code label and code block.

Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agodcbnl: Add CEE notification
Shmulik Ravid [Tue, 5 Jul 2011 06:16:25 +0000]
dcbnl: Add CEE notification

This patch add an unsolicited notification of the DCBX negotiated
parameters for the CEE flavor of the DCBX protocol. The notification
message is identical to the aggregated CEE get operation and holds all
the pertinent local and peer information. The notification routine is
exported so it can be invoked by drivers supporting an embedded DCBX
stack.

Signed-off-by: Shmulik Ravid <shmulikr@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agodcbnl: Aggregated CEE GET operation
Shmulik Ravid [Tue, 5 Jul 2011 06:16:22 +0000]
dcbnl: Aggregated CEE GET operation

The following couple of patches add dcbnl an unsolicited notification of
the the DCB configuration for the CEE flavor of the DCBX protocol. This
is useful when the user-mode DCB client is not responsible for
conducting and resolving the DCBX negotiation (either because the DCBX
stack is embedded in the HW or the negotiation is handled by another
agent in the host), but still needs to get the negotiated parameters.
This functionality already exists for the IEEE flavor of the DCBX
protocol and these patches add it to the older CEE flavor.

The first patch extends the CEE attribute GET operation to include not
only the peer information, but also all the pertinent local
configuration (negotiated parameters). The second patch adds and export
a CEE specific notification routine.

Signed-off-by: Shmulik Ravid <shmulikr@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoMerge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
David S. Miller [Wed, 6 Jul 2011 06:23:37 +0000]
Merge branch 'master' of /linux/kernel/git/davem/net-2.6

8 years agob44: Use pr_<level>_once and DRV_DESCRIPTION
Joe Perches [Tue, 5 Jul 2011 07:43:46 +0000]
b44: Use pr_<level>_once and DRV_DESCRIPTION

Convert a printk with a static to pr_<level>_once
Add and use DRV_DESCRIPTION to reduce string duplication.
Remove now unused version.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonet: Add GSO to vlan_features initialization
Shan Wei [Wed, 6 Jul 2011 03:44:17 +0000]
net: Add GSO to vlan_features initialization

Just add GSO to vlan_features initialization, and update comments.

When we set offload features, vlan_dev_fix_features() will do more check.
In vlan_dev_fix_features(), final features is decided by
features of real device and vlan_features of real device.

Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agopacket: Add pre-defragmentation support for ipv4 fanouts.
David S. Miller [Tue, 5 Jul 2011 08:43:20 +0000]
packet: Add pre-defragmentation support for ipv4 fanouts.

The skb->rxhash cannot be properly computed if the
packet is a fragment.  To alleviate this, allow the
AF_PACKET client to ask for defragmentation to be
done at demux time.

Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoipv4: Add ip_defrag() agent IP_DEFRAG_AF_PACKET.
David S. Miller [Tue, 5 Jul 2011 08:05:48 +0000]
ipv4: Add ip_defrag() agent IP_DEFRAG_AF_PACKET.

Elide the ICMP on frag queue timeouts unconditionally for
this user.

Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agopacket: Add fanout support.
David S. Miller [Tue, 5 Jul 2011 08:45:05 +0000]
packet: Add fanout support.

Fanouts allow packet capturing to be demuxed to a set of AF_PACKET
sockets.  Two fanout policies are implemented:

1) Hashing based upon skb->rxhash

2) Pure round-robin

An AF_PACKET socket must be fully bound before it tries to add itself
to a fanout.  All AF_PACKET sockets trying to join the same fanout
must all have the same bind settings.

Fanouts are identified (within a network namespace) by a 16-bit ID.
The first socket to try to add itself to a fanout with a particular
ID, creates that fanout.  When the last socket leaves the fanout
(which happens only when the socket is closed), that fanout is
destroyed.

Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agopacket: Add helpers to register/unregister ->prot_hook
David S. Miller [Mon, 4 Jul 2011 08:44:29 +0000]
packet: Add helpers to register/unregister ->prot_hook

Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonet: vlan: enable soft features regardless of underlying device
Shan Wei [Wed, 6 Jul 2011 03:43:12 +0000]
net: vlan: enable soft features regardless of underlying device

If gso/gro feature of underlying device is turned off,
then new created vlan device never can turn gso/gro on.

Although underlying device don't support TSO, we still
should use software segments for vlan device.

Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoMerge branch 'batman-adv/next' of git://git.open-mesh.org/linux-merge
David S. Miller [Wed, 6 Jul 2011 02:45:12 +0000]
Merge branch 'batman-adv/next' of git://git.open-mesh.org/linux-merge

8 years agovmxnet3: fix starving rx ring whenoc_skb kb fails
Shreyas Bhatewara [Tue, 5 Jul 2011 14:34:05 +0000]
vmxnet3: fix starving rx ring whenoc_skb kb fails

If the rx ring is completely empty, then the device may never fire an rx
interrupt. Unfortunately, the rx interrupt is what triggers populating the
rx ring with fresh buffers, so this will cause networking to lock up.

This patch replenishes the skb in recv descriptor as soon as it is
peeled off while processing rx completions. If the skb/buffer
allocation fails, existing one is recycled and the packet in hand is
dropped. This way none of the RX desc is ever left empty, thus avoiding
starvation

Signed-off-by: Scott J. Goldman <scottjg@vmware.com>
Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agobridge: Always flood broadcast packets
Herbert Xu [Tue, 5 Jul 2011 13:58:33 +0000]
bridge: Always flood broadcast packets

As is_multicast_ether_addr returns true on broadcast packets as
well, we need to explicitly exclude broadcast packets so that
they're always flooded.  This wasn't an issue before as broadcast
packets were considered to be an unregistered multicast group,
which were always flooded.  However, as we now only flood such
packets to router ports, this is no longer acceptable.

Reported-by: Michael Guntsche <mike@it-loops.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoMerge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville...
David S. Miller [Wed, 6 Jul 2011 01:22:39 +0000]
Merge branch 'for-davem' of git://git./linux/kernel/git/linville/wireless-next-2.6

8 years agossb: use pci_dev->subsystem_{vendor,device}
Sergei Shtylyov [Fri, 1 Jul 2011 18:34:42 +0000]
ssb: use pci_dev->subsystem_{vendor,device}

The SSB code reads PCI subsystem IDs from the PCI configuration registers while
they are already stored by the PCI subsystem in the 'subsystem_{vendor|device}'
fields of 'struct pci_dev'...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agossb: use pci_dev->revision
Sergei Shtylyov [Fri, 1 Jul 2011 18:33:08 +0000]
ssb: use pci_dev->revision

The SSB code reads PCI revision ID from the PCI configuration register while
it's already stored by the PCI subsystem in the 'revision' field  of 'struct
pci_dev'...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agob43: Add RX side DMA memory barrier
Michael Büsch [Mon, 4 Jul 2011 17:51:11 +0000]
b43: Add RX side DMA memory barrier

This adds a memory barrier to ensure the writes to the ring memory
are committed before the DMA ring pointer is updated.
We do a similar thing on the TX side already.

Signed-off-by: Michael Buesch <m@bues.ch>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agoNFC: add Documentation/networking/nfc.txt
Aloisio Almeida Jr [Fri, 1 Jul 2011 22:31:38 +0000]
NFC: add Documentation/networking/nfc.txt

Signed-off-by: Aloisio Almeida Jr <aloisio.almeida@openbossa.org>
Signed-off-by: Lauro Ramos Venancio <lauro.venancio@openbossa.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agoNFC: pn533: add NXP pn533 nfc device driver
Aloisio Almeida Jr [Fri, 1 Jul 2011 22:31:37 +0000]
NFC: pn533: add NXP pn533 nfc device driver

Signed-off-by: Lauro Ramos Venancio <lauro.venancio@openbossa.org>
Signed-off-by: Aloisio Almeida Jr <aloisio.almeida@openbossa.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agoNFC: add the NFC socket raw protocol
Lauro Ramos Venancio [Fri, 1 Jul 2011 22:31:36 +0000]
NFC: add the NFC socket raw protocol

This socket protocol is used to perform data exchange with NFC
targets.

Signed-off-by: Lauro Ramos Venancio <lauro.venancio@openbossa.org>
Signed-off-by: Aloisio Almeida Jr <aloisio.almeida@openbossa.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agoNFC: add NFC socket family
Aloisio Almeida Jr [Fri, 1 Jul 2011 22:31:35 +0000]
NFC: add NFC socket family

Signed-off-by: Lauro Ramos Venancio <lauro.venancio@openbossa.org>
Signed-off-by: Aloisio Almeida Jr <aloisio.almeida@openbossa.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agoNFC: add nfc generic netlink interface
Lauro Ramos Venancio [Fri, 1 Jul 2011 22:31:34 +0000]
NFC: add nfc generic netlink interface

The NFC generic netlink interface exports the NFC control operations
to the user space.

Signed-off-by: Lauro Ramos Venancio <lauro.venancio@openbossa.org>
Signed-off-by: Aloisio Almeida Jr <aloisio.almeida@openbossa.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agoNFC: add nfc subsystem core
Lauro Ramos Venancio [Fri, 1 Jul 2011 22:31:33 +0000]
NFC: add nfc subsystem core

The NFC subsystem core is responsible for providing the device driver
interface. It is also responsible for providing an interface to the control
operations and data exchange.

Signed-off-by: Lauro Ramos Venancio <lauro.venancio@openbossa.org>
Signed-off-by: Aloisio Almeida Jr <aloisio.almeida@openbossa.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agomac80211: allow driver to impose WoWLAN restrictions
Johannes Berg [Fri, 1 Jul 2011 22:02:01 +0000]
mac80211: allow driver to impose WoWLAN restrictions

If the driver can't support WoWLAN in the current
state, this patch allows it to return 1 from the
suspend callback to do the normal deconfiguration
instead of using suspend/resume calls. Note that
if it does this, resume won't be called.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agossb: PCI revision ID register is 8-bit wide
Sergei Shtylyov [Fri, 1 Jul 2011 18:35:28 +0000]
ssb: PCI revision ID register is 8-bit wide

The SSB code reads PCI revision ID register as 16-bit entity while the register
is actually 8-bit only (the next 8 bits are the programming interface register).
Fix the read and make the 'rev' field of 'struct ssb_boardinfo' 8-bit as well,
to match the register size.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agortlwifi: rtl8192de: Fix error exit from hw_init
Larry Finger [Fri, 1 Jul 2011 13:56:11 +0000]
rtlwifi: rtl8192de: Fix error exit from hw_init

In routine rtl92de_hw_init(), there are two places where a failure is
not handled correctly.

Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agortlwifi: rtl8192de: Replace loops calling udelay with single mdelay
Larry Finger [Fri, 1 Jul 2011 13:50:48 +0000]
rtlwifi: rtl8192de: Replace loops calling udelay with single mdelay

There are a number of loops to implement delays. These are replaced with
single calls to mdelay().

The need for a fix was noted by Andrew Morton <akpm@linux-foundation.org>.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agocarl9170: use carl9170 queue enums
Christian Lamparter [Fri, 1 Jul 2011 13:28:22 +0000]
carl9170: use carl9170 queue enums

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agortlwifi: rtl8192de: Remove comparison of boolean with true
Larry Finger [Thu, 30 Jun 2011 21:47:11 +0000]
rtlwifi: rtl8192de: Remove comparison of boolean with true

Tests of a boolean against "true" are not needed as non-zero is sufficient..

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agortlwifi: rtl8192{ce,cu,se} Remove irq_enabled
Mike McCormack [Thu, 30 Jun 2011 21:46:14 +0000]
rtlwifi: rtl8192{ce,cu,se} Remove irq_enabled

This should be unnecessary if synchronize_irq is used.

Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agortlwifi: rtl8192de: Remove irq_enabled boolean
Larry Finger [Thu, 30 Jun 2011 21:44:47 +0000]
rtlwifi: rtl8192de: Remove irq_enabled boolean

Prepare rtl8192de for the removal of irq_enaqbled.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agodrivers/net/wireless/rtlwifi/rtl8192de/phy.c: fix udelay() usage
Andrew Morton [Thu, 30 Jun 2011 21:28:50 +0000]
drivers/net/wireless/rtlwifi/rtl8192de/phy.c: fix udelay() usage

ERROR: "__bad_udelay" [drivers/net/wireless/rtlwifi/rtl8192de/rtl8192de.ko] undefined!

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agomac80211: fix smatch complains
Christian Lamparter [Thu, 30 Jun 2011 19:08:43 +0000]
mac80211: fix smatch complains

mlme.c
l.757 ieee80211_dynamic_ps_enable_work(11)
variable dereferenced before check 'sdata'

mesh_pathtbl.c
l.650 mesh_path_del(20) double lock 'bottom_half'
l.663 mesh_path_del(33) double unlock 'bottom_half'

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agocarl9170: allow PSM if the 5 GHz band is selected
Christian Lamparter [Thu, 30 Jun 2011 18:34:54 +0000]
carl9170: allow PSM if the 5 GHz band is selected

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agocarl9170: enable IEEE80211_HW_NEED_DTIM_PERIOD
Christian Lamparter [Thu, 30 Jun 2011 18:31:34 +0000]
carl9170: enable IEEE80211_HW_NEED_DTIM_PERIOD

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agocarl9170: import 1.9.4 firmware headers
Christian Lamparter [Thu, 30 Jun 2011 18:27:47 +0000]
carl9170: import 1.9.4 firmware headers

This patch imports all shared header changes
from carl9170fw.git.

 * update copyright boilerplate

 * add some more strategic __aligned(4).

 * WoWLAN

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agonet, wireless: Don't return uninitialized in __cfg80211_stop_sched_scan()
Jesper Juhl [Wed, 29 Jun 2011 20:49:33 +0000]
net, wireless: Don't return uninitialized in __cfg80211_stop_sched_scan()

If the 'driver_initiated' function argument to
__cfg80211_stop_sched_scan() is not 0 then we'll return an
uninitialized 'err' from the function.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agomac80211: Skip tailroom reservation for full HW-crypto devices with race fix
Yogesh Ashok Powar [Tue, 28 Jun 2011 13:11:37 +0000]
mac80211: Skip tailroom reservation for full HW-crypto devices with race fix

Based on inputs from Johannes Berg <johannes@sipsolutions.net>
from http://article.gmane.org/gmane.linux.kernel.wireless.general/68193
and http://article.gmane.org/gmane.linux.kernel.wireless.general/71702

In xmit path, devices that do full hardware crypto (including
MMIC and ICV) need no tailroom. For such devices, tailroom
reservation can be skipped if all the keys are programmed into
the hardware (i.e software crypto is not used for any of the
keys) and none of the keys wants software to generate Michael
MIC and IV.

v2: Added check for IV along with MMIC.
Reported-by: Fabio Rossi <rossi.f@inwind.it>
Tested-by: Fabio Rossi <rossi.f@inwind.it>
Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com>
Cc: Mohammed Shafi Shajakhan <mshajakhan@atheros.com>

v3: Fixing races to avoid WARNING: at net/mac80211/wpa.c:397
    ccmp_encrypt_skb+0xc4/0x1f0
Reported-by: Andreas Hartmann <andihartmann@01019freenet.de>
Tested-by: Andreas Hartmann <andihartmann@01019freenet.de>

v4: Added links with message ID

Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agobatman-adv: Replace version info instead of appending them
Sven Eckelmann [Tue, 5 Jul 2011 08:42:51 +0000]
batman-adv: Replace version info instead of appending them

The version number of modules build outside of the tree can get revision
numbers added. This is useful to give hints about the revision of a
distribution package and the used patchset. The prepended source number or
branch name doesn't add any additional information which would help to identify
problems and can therefore be omitted.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

8 years agobatman-adv: aggregation checks should use the primary_if pointer
Marek Lindner [Sun, 26 Jun 2011 19:15:13 +0000]
batman-adv: aggregation checks should use the primary_if pointer

The packet aggregation needs to ensure that only compatible packets
are aggregated. Some of the checks are based on the interface number
while assuming that the first interface also is the primary interface
which is not always the case.
This patch addresses the issue by using the primary_if pointer.

Reported-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

8 years agobatman-adv: broadcast primary OGM on all active hard-interfaces
Marek Lindner [Sun, 26 Jun 2011 13:26:18 +0000]
batman-adv: broadcast primary OGM on all active hard-interfaces

The primary interface OGM has to be broadcasted on all hard-interfaces
even if the primary interface is not the first interface (if_num = 0).
Therefore the code has to compare the originating interface with the
primary interface instead of checking the if_num.

Reported-by: Linus Luessing <linus.luessing@web.de>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

8 years agobatman-adv: pass a unique flag arg instead of a sequence of bool ones
Antonio Quartulli [Wed, 29 Jun 2011 23:14:00 +0000]
batman-adv: pass a unique flag arg instead of a sequence of bool ones

now tt_local_event() takes a flags argument instead of a sequence of
boolean values which would grow up with the time.

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

8 years agobatman-adv: add_bcast_packet_to_list() takes the sending delay as parameter
Antonio Quartulli [Sat, 25 Jun 2011 17:09:12 +0000]
batman-adv: add_bcast_packet_to_list() takes the sending delay as parameter

In order to make possible to use the broadcast list for delayed sendings
the "delay" parameter is now provided instead of using 1 as hardcoded
value.

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

8 years agobatman-adv: unify flags for tt_change/tt_local_entry/tt_global_entry
Antonio Quartulli [Fri, 17 Jun 2011 14:11:27 +0000]
batman-adv: unify flags for tt_change/tt_local_entry/tt_global_entry

The tt_local_entry structure now has a 'flags' field. This helps to
unify the flags format to all the client related structures (tt_global_entry
and tt_change). The 'never_purge' field is now encoded in the 'flags' one.
To optimise the usage of this field, its length has been increased to 16bit
in order to use the eight leading bits (from 0 to 7) to store flags that
have to be sent on the wire, while the eight ending ones are used for local
computation only.

Moreover 'enum tt_change_flags' is now called 'enum tt_client_flags' and the
defined values apply to the tt_local_entry, tt_global_entry and the tt_change
'flags' field.

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

8 years agobnx2x: Fix warning message during 57712/8727 initialization
Yaniv Rosner [Tue, 5 Jul 2011 01:07:16 +0000]
bnx2x: Fix warning message during 57712/8727 initialization

Clear warning message "MDC/MDIO access timeout" during first driver load by setting MDIO clock.
This warning has no significant meaning, since it occurs prior to the first PHY initialization.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agobnx2x: Add autogrEEEn support
Yaniv Rosner [Tue, 5 Jul 2011 01:07:05 +0000]
bnx2x: Add autogrEEEn support

Add autogrEEEn support on BCM84833 and 54618se, which allows to reduce power consumption.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agobnx2x: Fix BCM84833 initialization
Yaniv Rosner [Tue, 5 Jul 2011 01:06:59 +0000]
bnx2x: Fix BCM84833 initialization

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agobnx2x: Fix false link indication at link partner when DAC is used
Yaniv Rosner [Tue, 5 Jul 2011 01:06:53 +0000]
bnx2x: Fix false link indication at link partner when DAC is used

When driver is unloaded, disable PMD in addition to TX laser, provided that the management firmware will be able to enable it back.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agobnx2x: Reset PHY due to fan failure for 578xx
Yaniv Rosner [Tue, 5 Jul 2011 01:06:48 +0000]
bnx2x: Reset PHY due to fan failure for 578xx

Add hardware PHY reset action for BCM578xx when fan failure occur.
The new bnx2x_warpcore_hw_reset warps bnx2x_warpcore_power_module to fit the .hw_reset function template of the phy structure.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agobnx2x: Add CL37 BAM for Warpcore
Yaniv Rosner [Tue, 5 Jul 2011 01:06:41 +0000]
bnx2x: Add CL37 BAM for Warpcore

Add CL37 BAM support according to configuration.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agobnx2x: Change BCM54616S to BCM54618SE
Yaniv Rosner [Tue, 5 Jul 2011 01:06:34 +0000]
bnx2x: Change BCM54616S to BCM54618SE

Change 1G copper PHY BCM54616S to BCM54618SE since we only have HW with latter one of the two.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agobnx2x: PFC fixes
Yaniv Rosner [Tue, 5 Jul 2011 01:06:27 +0000]
bnx2x: PFC fixes

Set the source MAC address for PFC packets and update its status during PMF migration.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agogreth: greth_set_mac_add would corrupt the MAC address.
Kristoffer Glembo [Tue, 5 Jul 2011 04:39:10 +0000]
greth: greth_set_mac_add would corrupt the MAC address.

The MAC address was set using the signed char sockaddr->sa_addr
field and thus the address could be corrupted through sign extension.

Signed-off-by: Kristoffer Glembo <kristoffer@gaisler.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonet: bind() fix error return on wrong address family
Marcus Meissner [Mon, 4 Jul 2011 01:30:29 +0000]
net: bind() fix error return on wrong address family

Hi,

Reinhard Max also pointed out that the error should EAFNOSUPPORT according
to POSIX.

The Linux manpages have it as EINVAL, some other OSes (Minix, HPUX, perhaps BSD) use
EAFNOSUPPORT. Windows uses WSAEFAULT according to MSDN.

Other protocols error values in their af bind() methods in current mainline git as far
as a brief look shows:
EAFNOSUPPORT: atm, appletalk, l2tp, llc, phonet, rxrpc
EINVAL: ax25, bluetooth, decnet, econet, ieee802154, iucv, netlink, netrom, packet, rds, rose, unix, x25,
No check?: can/raw, ipv6/raw, irda, l2tp/l2tp_ip

Ciao, Marcus

Signed-off-by: Marcus Meissner <meissner@suse.de>
Cc: Reinhard Max <max@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonet/wireless: ipw2x00: Use helpers from linux/etherdevice.h
Tobias Klauser [Mon, 4 Jul 2011 00:00:22 +0000]
net/wireless: ipw2x00: Use helpers from linux/etherdevice.h

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonet: vxge: Use is_multicast_ether_addr helper
Tobias Klauser [Sun, 3 Jul 2011 23:58:04 +0000]
net: vxge: Use is_multicast_ether_addr helper

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonet: ewrk3: Use helpers from linux/etherdevice.h
Tobias Klauser [Sun, 3 Jul 2011 23:56:22 +0000]
net: ewrk3: Use helpers from linux/etherdevice.h

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonet: depca: Use helpers from linux/etherdevice.h
Tobias Klauser [Sun, 3 Jul 2011 23:55:53 +0000]
net: depca: Use helpers from linux/etherdevice.h

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonet: rionet: Use is_multicast_ether_addr
Tobias Klauser [Sun, 3 Jul 2011 23:54:54 +0000]
net: rionet: Use is_multicast_ether_addr

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonet: iseries_veth: Use is_unicast_ether_addr helper
Tobias Klauser [Sun, 3 Jul 2011 23:52:03 +0000]
net: iseries_veth: Use is_unicast_ether_addr helper

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonet: igb: Use is_multicast_ether_addr helper
Tobias Klauser [Sun, 3 Jul 2011 23:50:15 +0000]
net: igb: Use is_multicast_ether_addr helper

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonet: de4x5: Use helpers from linux/etherdevice.h
Tobias Klauser [Sun, 3 Jul 2011 23:48:13 +0000]
net: de4x5: Use helpers from linux/etherdevice.h

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonet: e1000e: Use is_multicast_ether_addr helper
Tobias Klauser [Sun, 3 Jul 2011 23:47:04 +0000]
net: e1000e: Use is_multicast_ether_addr helper

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>