4 years agoARM: 8427/1: dma-mapping: add support for offset parameter in dma_mmap()
Marek Szyprowski [Fri, 28 Aug 2015 08:42:09 +0000]
ARM: 8427/1: dma-mapping: add support for offset parameter in dma_mmap()

commit 7e31210349e9e03a9a4dff31ab5f2bc83e8e84f5 upstream.

IOMMU-based dma_mmap() implementation lacked proper support for offset
parameter used in mmap call (it always assumed that mapping starts from
offset zero). This patch adds support for offset parameter to IOMMU-based

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoARM: 8426/1: dma-mapping: add missing range check in dma_mmap()
Marek Szyprowski [Fri, 28 Aug 2015 08:41:39 +0000]
ARM: 8426/1: dma-mapping: add missing range check in dma_mmap()

commit 371f0f085f629fc0f66695f572373ca4445a67ad upstream.

dma_mmap() function in IOMMU-based dma-mapping implementation lacked
a check for valid range of mmap parameters (offset and buffer size), what
might have caused access beyond the allocated buffer. This patch fixes
this issue.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoRDS: verify the underlying transport exists before creating a connection
Sasha Levin [Tue, 8 Sep 2015 14:53:40 +0000]
RDS: verify the underlying transport exists before creating a connection

[ Upstream commit 74e98eb085889b0d2d4908f59f6e00026063014f ]

There was no verification that an underlying transport exists when creating
a connection, this would cause dereferencing a NULL ptr.

It might happen on sockets that weren't properly bound before attempting to
send a message, which will cause a NULL ptr deref:

[135546.047719] kasan: GPF could be caused by NULL-ptr deref or user memory accessgeneral protection fault: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN
[135546.051270] Modules linked in:
[135546.051781] CPU: 4 PID: 15650 Comm: trinity-c4 Not tainted 4.2.0-next-20150902-sasha-00041-gbaa1222-dirty #2527
[135546.053217] task: ffff8800835bc000 ti: ffff8800bc708000 task.ti: ffff8800bc708000
[135546.054291] RIP: __rds_conn_create (net/rds/connection.c:194)
[135546.055666] RSP: 0018:ffff8800bc70fab0  EFLAGS: 00010202
[135546.056457] RAX: dffffc0000000000 RBX: 0000000000000f2c RCX: ffff8800835bc000
[135546.057494] RDX: 0000000000000007 RSI: ffff8800835bccd8 RDI: 0000000000000038
[135546.058530] RBP: ffff8800bc70fb18 R08: 0000000000000001 R09: 0000000000000000
[135546.059556] R10: ffffed014d7a3a23 R11: ffffed014d7a3a21 R12: 0000000000000000
[135546.060614] R13: 0000000000000001 R14: ffff8801ec3d0000 R15: 0000000000000000
[135546.061668] FS:  00007faad4ffb700(0000) GS:ffff880252000000(0000) knlGS:0000000000000000
[135546.062836] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[135546.063682] CR2: 000000000000846a CR3: 000000009d137000 CR4: 00000000000006a0
[135546.064723] Stack:
[135546.065048]  ffffffffafe2055c ffffffffafe23fc1 ffffed00493097bf ffff8801ec3d0008
[135546.066247]  0000000000000000 00000000000000d0 0000000000000000 ac194a24c0586342
[135546.067438]  1ffff100178e1f78 ffff880320581b00 ffff8800bc70fdd0 ffff880320581b00
[135546.068629] Call Trace:
[135546.069028] ? __rds_conn_create (include/linux/rcupdate.h:856 net/rds/connection.c:134)
[135546.069989] ? rds_message_copy_from_user (net/rds/message.c:298)
[135546.071021] rds_conn_create_outgoing (net/rds/connection.c:278)
[135546.071981] rds_sendmsg (net/rds/send.c:1058)
[135546.072858] ? perf_trace_lock (include/trace/events/lock.h:38)
[135546.073744] ? lockdep_init (kernel/locking/lockdep.c:3298)
[135546.074577] ? rds_send_drop_to (net/rds/send.c:976)
[135546.075508] ? __might_fault (./arch/x86/include/asm/current.h:14 mm/memory.c:3795)
[135546.076349] ? __might_fault (mm/memory.c:3795)
[135546.077179] ? rds_send_drop_to (net/rds/send.c:976)
[135546.078114] sock_sendmsg (net/socket.c:611 net/socket.c:620)
[135546.078856] SYSC_sendto (net/socket.c:1657)
[135546.079596] ? SYSC_connect (net/socket.c:1628)
[135546.080510] ? trace_dump_stack (kernel/trace/trace.c:1926)
[135546.081397] ? ring_buffer_unlock_commit (kernel/trace/ring_buffer.c:2479 kernel/trace/ring_buffer.c:2558 kernel/trace/ring_buffer.c:2674)
[135546.082390] ? trace_buffer_unlock_commit (kernel/trace/trace.c:1749)
[135546.083410] ? trace_event_raw_event_sys_enter (include/trace/events/syscalls.h:16)
[135546.084481] ? do_audit_syscall_entry (include/trace/events/syscalls.h:16)
[135546.085438] ? trace_buffer_unlock_commit (kernel/trace/trace.c:1749)
[135546.085515] rds_ib_laddr_check(): addr ret -99 node type -1

Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agovirtio-net: drop NETIF_F_FRAGLIST
Jason Wang [Wed, 5 Aug 2015 02:34:04 +0000]
virtio-net: drop NETIF_F_FRAGLIST

[ Upstream commit 48900cb6af4282fa0fb6ff4d72a81aa3dadb5c39 ]

virtio declares support for NETIF_F_FRAGLIST, but assumes
that there are at most MAX_SKB_FRAGS + 2 fragments which isn't
always true with a fraglist.

A longer fraglist in the skb will make the call to skb_to_sgvec overflow
the sg array, leading to memory corruption.

Drop NETIF_F_FRAGLIST so we only get what we can handle.

Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agonet: fix a race in dst_release()
Eric Dumazet [Tue, 10 Nov 2015 01:51:23 +0000]
net: fix a race in dst_release()

[ Upstream commit d69bbf88c8d0b367cf3e3a052f6daadf630ee566 ]

Only cpu seeing dst refcount going to 0 can safely
dereference dst->flags.

Otherwise an other cpu might already have freed the dst.

Fixes: 27b75c95f10d ("net: avoid RCU for NOCACHE dst")
Reported-by: Greg Thelen <gthelen@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agonet: avoid NULL deref in inet_ctl_sock_destroy()
Eric Dumazet [Mon, 2 Nov 2015 15:50:07 +0000]
net: avoid NULL deref in inet_ctl_sock_destroy()

[ Upstream commit 8fa677d2706d325d71dab91bf6e6512c05214e37 ]

Under low memory conditions, tcp_sk_init() and icmp_sk_init()
can both iterate on all possible cpus and call inet_ctl_sock_destroy(),
with eventual NULL pointer.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoipmr: fix possible race resulting from improper usage of IP_INC_STATS_BH() in preempt...
Ani Sinha [Fri, 30 Oct 2015 23:54:31 +0000]
ipmr: fix possible race resulting from improper usage of IP_INC_STATS_BH() in preemptible context.

[ Upstream commit 44f49dd8b5a606870a1f21101522a0f9c4414784 ]

Fixes the following kernel BUG :

BUG: using __this_cpu_add() in preemptible [00000000] code: bash/2758
caller is __this_cpu_preempt_check+0x13/0x15
CPU: 0 PID: 2758 Comm: bash Tainted: P           O   3.18.19 #2
 ffffffff8170eaca ffff880110d1b788 ffffffff81482b2a 0000000000000000
 0000000000000000 ffff880110d1b7b8 ffffffff812010ae ffff880007cab800
 ffff88001a060800 ffff88013a899108 ffff880108b84240 ffff880110d1b7c8
Call Trace:
[<ffffffff81482b2a>] dump_stack+0x52/0x80
[<ffffffff812010ae>] check_preemption_disabled+0xce/0xe1
[<ffffffff812010d4>] __this_cpu_preempt_check+0x13/0x15
[<ffffffff81419d60>] ipmr_queue_xmit+0x647/0x70c
[<ffffffff8141a154>] ip_mr_forward+0x32f/0x34e
[<ffffffff8141af76>] ip_mroute_setsockopt+0xe03/0x108c
[<ffffffff810553fc>] ? get_parent_ip+0x11/0x42
[<ffffffff810e6974>] ? pollwake+0x4d/0x51
[<ffffffff81058ac0>] ? default_wake_function+0x0/0xf
[<ffffffff810553fc>] ? get_parent_ip+0x11/0x42
[<ffffffff810613d9>] ? __wake_up_common+0x45/0x77
[<ffffffff81486ea9>] ? _raw_spin_unlock_irqrestore+0x1d/0x32
[<ffffffff810618bc>] ? __wake_up_sync_key+0x4a/0x53
[<ffffffff8139a519>] ? sock_def_readable+0x71/0x75
[<ffffffff813dd226>] do_ip_setsockopt+0x9d/0xb55
[<ffffffff81429818>] ? unix_seqpacket_sendmsg+0x3f/0x41
[<ffffffff813963fe>] ? sock_sendmsg+0x6d/0x86
[<ffffffff813959d4>] ? sockfd_lookup_light+0x12/0x5d
[<ffffffff8139650a>] ? SyS_sendto+0xf3/0x11b
[<ffffffff810d5738>] ? new_sync_read+0x82/0xaa
[<ffffffff813ddd19>] compat_ip_setsockopt+0x3b/0x99
[<ffffffff813fb24a>] compat_raw_setsockopt+0x11/0x32
[<ffffffff81399052>] compat_sock_common_setsockopt+0x18/0x1f
[<ffffffff813c4d05>] compat_SyS_setsockopt+0x1a9/0x1cf
[<ffffffff813c4149>] compat_SyS_socketcall+0x180/0x1e3
[<ffffffff81488ea1>] cstar_dispatch+0x7/0x1e

Signed-off-by: Ani Sinha <ani@arista.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agostmmac: Correctly report PTP capabilities.
Phil Reid [Fri, 30 Oct 2015 08:43:55 +0000]
stmmac: Correctly report PTP capabilities.

[ Upstream commit e6dbe1eb2db0d7a14991c06278dd3030c45fb825 ]

priv->hwts_*_en indicate if timestamping is enabled/disabled at run
time. But  priv->dma_cap.time_stamp  and priv->dma_cap.atime_stamp
indicates HW is support for PTPv1/PTPv2.

Signed-off-by: Phil Reid <preid@electromag.com.au>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agonet/mlx4: Copy/set only sizeof struct mlx4_eqe bytes
Carol L Soto [Tue, 27 Oct 2015 15:36:20 +0000]
net/mlx4: Copy/set only sizeof struct mlx4_eqe bytes

[ Upstream commit c02b05011fadf8e409e41910217ca689f2fc9d91 ]

When doing memcpy/memset of EQEs, we should use sizeof struct
mlx4_eqe as the base size and not caps.eqe_size which could be bigger.

If caps.eqe_size is bigger than the struct mlx4_eqe then we corrupt
data in the master context.

When using a 64 byte stride, the memcpy copied over 63 bytes to the
slave_eq structure.  This resulted in copying over the entire eqe of
interest, including its ownership bit -- and also 31 bytes of garbage
into the next WQE in the slave EQ -- which did NOT include the ownership
bit (and therefore had no impact).

However, once the stride is increased to 128, we are overwriting the
ownership bits of *three* eqes in the slave_eq struct.  This results
in an incorrect ownership bit for those eqes, which causes the eq to
seem to be full. The issue therefore surfaced only once 128-byte EQEs
started being used in SRIOV and (overarchitectures that have 128/256
byte cache-lines such as PPC) - e.g after commit 77507aa249ae
"net/mlx4_core: Enable CQE/EQE stride support".

Fixes: 08ff32352d6f ('mlx4: 64-byte CQE/EQE support')
Signed-off-by: Carol L Soto <clsoto@linux.vnet.ibm.com>
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoRDS-TCP: Recover correctly from pskb_pull()/pksb_trim() failure in rds_tcp_data_recv
Sowmini Varadhan [Mon, 26 Oct 2015 16:46:37 +0000]
RDS-TCP: Recover correctly from pskb_pull()/pksb_trim() failure in rds_tcp_data_recv

[ Upstream commit 8ce675ff39b9958d1c10f86cf58e357efaafc856 ]

Either of pskb_pull() or pskb_trim() may fail under low memory conditions.
If rds_tcp_data_recv() ignores such failures, the application will
receive corrupted data because the skb has not been correctly
carved to the RDS datagram size.

Avoid this by handling pskb_pull/pskb_trim failure in the same
manner as the skb_clone failure: bail out of rds_tcp_data_recv(), and
retry via the deferred call to rds_send_worker() that gets set up on
ENOMEM from rds_tcp_read_sock()

Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoppp: fix pppoe_dev deletion condition in pppoe_release()
Guillaume Nault [Thu, 22 Oct 2015 14:57:10 +0000]
ppp: fix pppoe_dev deletion condition in pppoe_release()

[ Upstream commit 1acea4f6ce1b1c0941438aca75dd2e5c6b09db60 ]

We can't rely on PPPOX_ZOMBIE to decide whether to clear po->pppoe_dev.
PPPOX_ZOMBIE can be set by pppoe_disc_rcv() even when po->pppoe_dev is
NULL. So we have no guarantee that (sk->sk_state & PPPOX_ZOMBIE) implies
(po->pppoe_dev != NULL).
Since we're releasing a PPPoE socket, we want to release the pppoe_dev
if it exists and reset sk_state to PPPOX_DEAD, no matter the previous
value of sk_state. So we can just check for po->pppoe_dev and avoid any
assumption on sk->sk_state.

Fixes: 2b018d57ff18 ("pppoe: drop PPPOX_ZOMBIEs in pppoe_release")
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoirda: precedence bug in irlmp_seq_hb_idx()
Dan Carpenter [Mon, 19 Oct 2015 10:16:49 +0000]
irda: precedence bug in irlmp_seq_hb_idx()

[ Upstream commit 50010c20597d14667eff0fdb628309986f195230 ]

This is decrementing the pointer, instead of the value stored in the
pointer.  KASan detects it as an out of bounds reference.

Reported-by: "Berry Cheng 程君(成淼)" <chengmiao.cj@alibaba-inc.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoLinux 3.10.93
Greg Kroah-Hartman [Mon, 9 Nov 2015 18:13:32 +0000]
Linux 3.10.93

4 years agoxen: fix backport of previous kexec patch
Greg Kroah-Hartman [Fri, 6 Nov 2015 19:07:07 +0000]
xen: fix backport of previous kexec patch

Fixes the backport of 0b34a166f291d255755be46e43ed5497cdd194f2 upstream

Commit 0b34a166f291d255755be46e43ed5497cdd194f2 "x86/xen: Support
kexec/kdump in HVM guests by doing a soft reset" has been added to the
4.2-stable tree" needed to correct the CONFIG variable, as
CONFIG_KEXEC_CORE only showed up in 4.3.

Reported-by: David Vrabel <david.vrabel@citrix.com>
Reported-by: Luis Henriques <luis.henriques@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoIB/cm: Fix rb-tree duplicate free and use-after-free
Doron Tsur [Sun, 11 Oct 2015 12:58:17 +0000]
IB/cm: Fix rb-tree duplicate free and use-after-free

commit 0ca81a2840f77855bbad1b9f172c545c4dc9e6a4 upstream.

ib_send_cm_sidr_rep could sometimes erase the node from the sidr
(depending on errors in the process). Since ib_send_cm_sidr_rep is
called both from cm_sidr_req_handler and cm_destroy_id, cm_id_priv
could be either erased from the rb_tree twice or not erased at all.
Fixing that by making sure it's erased only once before freeing

Fixes: a977049dacde ('[PATCH] IB: Add the kernel CM implementation')
Signed-off-by: Doron Tsur <doront@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agomvsas: Fix NULL pointer dereference in mvs_slot_task_free
Dāvis Mosāns [Fri, 21 Aug 2015 04:29:22 +0000]
mvsas: Fix NULL pointer dereference in mvs_slot_task_free

commit 2280521719e81919283b82902ac24058f87dfc1b upstream.

When pci_pool_alloc fails in mvs_task_prep then task->lldd_task stays
NULL but it's later used in mvs_abort_task as slot which is passed
to mvs_slot_task_free causing NULL pointer dereference.

Just return from mvs_slot_task_free when passed with NULL slot.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=101891
Signed-off-by: Dāvis Mosāns <davispuh@gmail.com>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agomd/raid10: submit_bio_wait() returns 0 on success
Jes Sorensen [Tue, 20 Oct 2015 16:09:13 +0000]
md/raid10: submit_bio_wait() returns 0 on success

commit 681ab4696062f5aa939c9e04d058732306a97176 upstream.

This was introduced with 9e882242c6193ae6f416f2d8d8db0d9126bd996b
which changed the return value of submit_bio_wait() to return != 0 on
error, but didn't update the caller accordingly.

Fixes: 9e882242c6 ("block: Add submit_bio_wait(), remove from md")
Reported-by: Bill Kuzeja <William.Kuzeja@stratus.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agomd/raid1: submit_bio_wait() returns 0 on success
Jes Sorensen [Tue, 20 Oct 2015 16:09:12 +0000]
md/raid1: submit_bio_wait() returns 0 on success

commit 203d27b0226a05202438ddb39ef0ef1acb14a759 upstream.

This was introduced with 9e882242c6193ae6f416f2d8d8db0d9126bd996b
which changed the return value of submit_bio_wait() to return != 0 on
error, but didn't update the caller accordingly.

Fixes: 9e882242c6 ("block: Add submit_bio_wait(), remove from md")
Reported-by: Bill Kuzeja <William.Kuzeja@stratus.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agocrypto: api - Only abort operations on fatal signal
Herbert Xu [Mon, 19 Oct 2015 10:23:57 +0000]
crypto: api - Only abort operations on fatal signal

commit 3fc89adb9fa4beff31374a4bf50b3d099d88ae83 upstream.

Currently a number of Crypto API operations may fail when a signal
occurs.  This causes nasty problems as the caller of those operations
are often not in a good position to restart the operation.

In fact there is currently no need for those operations to be
interrupted by user signals at all.  All we need is for them to
be killable.

This patch replaces the relevant calls of signal_pending with
fatal_signal_pending, and wait_for_completion_interruptible with
wait_for_completion_killable, respectively.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agomodule: Fix locking in symbol_put_addr()
Peter Zijlstra [Thu, 20 Aug 2015 01:04:59 +0000]
module: Fix locking in symbol_put_addr()

commit 275d7d44d802ef271a42dc87ac091a495ba72fc5 upstream.

Poma (on the way to another bug) reported an assertion triggering:

  [<ffffffff81150529>] module_assert_mutex_or_preempt+0x49/0x90
  [<ffffffff81150822>] __module_address+0x32/0x150
  [<ffffffff81150956>] __module_text_address+0x16/0x70
  [<ffffffff81150f19>] symbol_put_addr+0x29/0x40
  [<ffffffffa04b77ad>] dvb_frontend_detach+0x7d/0x90 [dvb_core]

Laura Abbott <labbott@redhat.com> produced a patch which lead us to
inspect symbol_put_addr(). This function has a comment claiming it
doesn't need to disable preemption around the module lookup
because it holds a reference to the module it wants to find, which
therefore cannot go away.

This is wrong (and a false optimization too, preempt_disable() is really
rather cheap, and I doubt any of this is on uber critical paths,
otherwise it would've retained a pointer to the actual module anyway and
avoided the second lookup).

While its true that the module cannot go away while we hold a reference
on it, the data structure we do the lookup in very much _CAN_ change
while we do the lookup. Therefore fix the comment and add the
required preempt_disable().

Reported-by: poma <pomidorabelisima@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fixes: a6e6abd575fc ("module: remove module_text_address()")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoxen-blkfront: check for null drvdata in blkback_changed (XenbusStateClosing)
Cathy Avery [Fri, 2 Oct 2015 13:35:01 +0000]
xen-blkfront: check for null drvdata in blkback_changed (XenbusStateClosing)

commit a54c8f0f2d7df525ff997e2afe71866a1a013064 upstream.

xen-blkfront will crash if the check to talk_to_blkback()
in blkback_changed()(XenbusStateInitWait) returns an error.
The driver data is freed and info is set to NULL. Later during
the close process via talk_to_blkback's call to xenbus_dev_fatal()
the null pointer is passed to and dereference in blkfront_closing.

Signed-off-by: Cathy Avery <cathy.avery@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoxhci: handle no ping response error properly
Mathias Nyman [Mon, 12 Oct 2015 08:30:12 +0000]
xhci: handle no ping response error properly

commit 3b4739b8951d650becbcd855d7d6f18ac98a9a85 upstream.

If a host fails to wake up a isochronous SuperSpeed device from U1/U2
in time for a isoch transfer it will generate a "No ping response error"
Host will then move to the next transfer descriptor.

Handle this case in the same way as missed service errors, tag the
current TD as skipped and handle it on the next transfer event.

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agodm btree: fix leak of bufio-backed block in btree_split_beneath error path
Mike Snitzer [Thu, 22 Oct 2015 14:56:40 +0000]
dm btree: fix leak of bufio-backed block in btree_split_beneath error path

commit 4dcb8b57df3593dcb20481d9d6cf79d1dc1534be upstream.

btree_split_beneath()'s error path had an outstanding FIXME that speaks
directly to the potential for _not_ cleaning up a previously allocated
bufio-backed block.

Fix this by releasing the previously allocated bufio block using

Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Acked-by: Joe Thornber <thornber@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agodm btree remove: fix a bug when rebalancing nodes after removal
Joe Thornber [Wed, 21 Oct 2015 17:36:49 +0000]
dm btree remove: fix a bug when rebalancing nodes after removal

commit 2871c69e025e8bc507651d5a9cf81a8a7da9d24b upstream.

Commit 4c7e309340ff ("dm btree remove: fix bug in redistribute3") wasn't
a complete fix for redistribute3().

The redistribute3 function takes 3 btree nodes and shares out the entries
evenly between them.  If the three nodes in total contained
(MAX_ENTRIES * 3) - 1 entries between them then this was erroneously getting
rebalanced as (MAX_ENTRIES - 1) on the left and right, and (MAX_ENTRIES + 1) in
the center.

Fix this issue by being more careful about calculating the target number
of entries for the left and right nodes.

Unit tested in userspace using this program:

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoRevert "ARM64: unwind: Fix PC calculation"
Will Deacon [Wed, 28 Oct 2015 16:56:13 +0000]
Revert "ARM64: unwind: Fix PC calculation"

commit 9702970c7bd3e2d6fecb642a190269131d4ac16c upstream.

This reverts commit e306dfd06fcb44d21c80acb8e5a88d55f3d1cf63.

With this patch applied, we were the only architecture making this sort
of adjustment to the PC calculation in the unwinder. This causes
problems for ftrace, where the PC values are matched against the
contents of the stack frames in the callchain and fail to match any
records after the address adjustment.

Whilst there has been some effort to change ftrace to workaround this,
those patches are not yet ready for mainline and, since we're the odd
architecture in this regard, let's just step in line with other
architectures (like arch/arm/) for now.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agorbd: prevent kernel stack blow up on rbd map
Ilya Dryomov [Sun, 11 Oct 2015 17:38:00 +0000]
rbd: prevent kernel stack blow up on rbd map

commit 6d69bb536bac0d403d83db1ca841444981b280cd upstream.

Mapping an image with a long parent chain (e.g. image foo, whose parent
is bar, whose parent is baz, etc) currently leads to a kernel stack
overflow, due to the following recursion in the reply path:


Limit the parent chain to 16 images, which is ~5K worth of stack.  When
the above recursion is eliminated, this limit can be lifted.

Fixes: http://tracker.ceph.com/issues/12538

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Josh Durgin <jdurgin@redhat.com>
[idryomov@gmail.com: backport to 3.10: rbd_dev->opts, context]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agorbd: don't leak parent_spec in rbd_dev_probe_parent()
Ilya Dryomov [Sun, 11 Oct 2015 17:38:00 +0000]
rbd: don't leak parent_spec in rbd_dev_probe_parent()

commit 1f2c6651f69c14d0d3a9cfbda44ea101b02160ba upstream.

Currently we leak parent_spec and trigger a "parent reference
underflow" warning if rbd_dev_create() in rbd_dev_probe_parent() fails.
The problem is we take the !parent out_err branch and that only drops
refcounts; parent_spec that would've been freed had we called
rbd_dev_unparent() remains and triggers rbd_warn() in
rbd_dev_parent_put() - at that point we have parent_spec != NULL and
parent_ref == 0, so counter ends up being -1 after the decrement.

Redo rbd_dev_probe_parent() to fix this.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
[idryomov@gmail.com: backport to < 4.2: rbd_dev->opts]
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agorbd: require stable pages if message data CRCs are enabled
Ronny Hegewald [Thu, 15 Oct 2015 18:50:46 +0000]
rbd: require stable pages if message data CRCs are enabled

commit bae818ee1577c27356093901a0ea48f672eda514 upstream.

rbd requires stable pages, as it performs a crc of the page data before
they are send to the OSDs.

But since kernel 3.9 (patch 1d1d1a767206fbe5d4c69493b7e6d2a8d08cc0a0
"mm: only enforce stable page writes if the backing device requires
it") it is not assumed anymore that block devices require stable pages.

This patch sets the necessary flag to get stable pages back for rbd.

In a ceph installation that provides multiple ext4 formatted rbd
devices "bad crc" messages appeared regularly (ca 1 message every 1-2
minutes on every OSD that provided the data for the rbd) in the
OSD-logs before this patch. After this patch this messages are pretty
much gone (only ca 1-2 / month / OSD).

Signed-off-by: Ronny Hegewald <Ronny.Hegewald@online.de>
[idryomov@gmail.com: require stable pages only in crc case, changelog]
[idryomov@gmail.com: backport to 3.9-3.17: context]
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agodrm/nouveau/gem: return only valid domain when there's only one
Ilia Mirkin [Tue, 20 Oct 2015 05:15:39 +0000]
drm/nouveau/gem: return only valid domain when there's only one

commit 2a6c521bb41ce862e43db46f52e7681d33e8d771 upstream.

On nv50+, we restrict the valid domains to just the one where the buffer
was originally created. However after the buffer is evicted to system
memory, we might move it back to a different domain that was not
originally valid. When sharing the buffer and retrieving its GEM_INFO
data, we still want the domain that will be valid for this buffer in a
pushbuf, not the one where it currently happens to be.

This resolves fdo#92504 and several others. These are due to suspend
evicting all buffers, making it more likely that they temporarily end up
in the wrong place.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92504
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agomm: make sendfile(2) killable
Jan Kara [Thu, 22 Oct 2015 20:32:21 +0000]
mm: make sendfile(2) killable

commit 296291cdd1629c308114504b850dc343eabc2782 upstream.

Currently a simple program below issues a sendfile(2) system call which
takes about 62 days to complete in my test KVM instance.

        int fd;
        off_t off = 0;

        fd = open("file", O_RDWR | O_TRUNC | O_SYNC | O_CREAT, 0644);
        ftruncate(fd, 2);
        lseek(fd, 0, SEEK_END);
        sendfile(fd, fd, &off, 0xfffffff);

Now you should not ask kernel to do a stupid stuff like copying 256MB in
2-byte chunks and call fsync(2) after each chunk but if you do, sysadmin
should have a way to stop you.

We actually do have a check for fatal_signal_pending() in
generic_perform_write() which triggers in this path however because we
always succeed in writing something before the check is done, we return
value > 0 from generic_perform_write() and thus the information about
signal gets lost.

Fix the problem by doing the signal check before writing anything.  That
way generic_perform_write() returns -EINTR, the error gets propagated up
and the sendfile loop terminates early.

Signed-off-by: Jan Kara <jack@suse.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoASoC: wm8904: Correct number of EQ registers
Charles Keepax [Tue, 20 Oct 2015 09:25:58 +0000]
ASoC: wm8904: Correct number of EQ registers

commit 97aff2c03a1e4d343266adadb52313613efb027f upstream.

There are 24 EQ registers not 25, I suspect this bug came about because
the registers start at EQ1 not zero. The bug is relatively harmless as
the extra register written is an unused one.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agopowerpc/rtas: Validate rtas.entry before calling enter_rtas()
Vasant Hegde [Fri, 16 Oct 2015 10:23:29 +0000]
powerpc/rtas: Validate rtas.entry before calling enter_rtas()

commit 8832317f662c06f5c06e638f57bfe89a71c9b266 upstream.

Currently we do not validate rtas.entry before calling enter_rtas(). This
leads to a kernel oops when user space calls rtas system call on a powernv
platform (see below). This patch adds code to validate rtas.entry before
making enter_rtas() call.

  Oops: Exception in kernel mode, sig: 4 [#1]
  task: c000000004294b80 ti: c0000007e1a78000 task.ti: c0000007e1a78000
  NIP: 0000000000000000 LR: 0000000000009c14 CTR: c000000000423140
  REGS: c0000007e1a7b920 TRAP: 0e40   Not tainted  (3.18.17-340.el7_1.pkvm3_1_0.2400.1.ppc64le)
  MSR: 1000000000081000 <HV,ME>  CR: 00000000  XER: 00000000
  CFAR: c000000000009c0c SOFTE: 0
  NIP [0000000000000000]           (null)
  LR [0000000000009c14] 0x9c14
  Call Trace:
  [c0000007e1a7bba0] [c00000000041a7f4] avc_has_perm_noaudit+0x54/0x110 (unreliable)
  [c0000007e1a7bd80] [c00000000002ddc0] ppc_rtas+0x150/0x2d0
  [c0000007e1a7be30] [c000000000009358] syscall_exit+0x0/0x98

Fixes: 55190f88789a ("powerpc: Add skeleton PowerNV platform")
Reported-by: NAGESWARA R. SASTRY <nasastry@in.ibm.com>
Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
[mpe: Reword change log, trim oops, and add stable + fixes]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoiommu/amd: Don't clear DTE flags when modifying it
Joerg Roedel [Tue, 20 Oct 2015 12:59:36 +0000]
iommu/amd: Don't clear DTE flags when modifying it

commit cbf3ccd09d683abf1cacd36e3640872ee912d99b upstream.

During device assignment/deassignment the flags in the DTE
get lost, which might cause spurious faults, for example
when the device tries to access the system management range.
Fix this by not clearing the flags with the rest of the DTE.

Reported-by: G. Richard Bellamy <rbellamy@pteradigm.com>
Tested-by: G. Richard Bellamy <rbellamy@pteradigm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoiwlwifi: mvm: fix D3 firmware PN programming
Johannes Berg [Tue, 15 Sep 2015 12:36:09 +0000]
iwlwifi: mvm: fix D3 firmware PN programming

commit 2cf5eb3ab7bb7f2e3a70edcef236cd62c87db030 upstream.

The code to send the RX PN data (for each TID) to the firmware
has a devastating bug: it overwrites the data for TID 0 with
all the TID data, leaving the remaining TIDs zeroed. This will
allow replays to actually be accepted by the firmware, which
could allow waking up the system.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoiwlwifi: dvm: fix D3 firmware PN programming
Johannes Berg [Tue, 15 Sep 2015 12:36:09 +0000]
iwlwifi: dvm: fix D3 firmware PN programming

commit 5bd166872d8f99f156fac191299d24f828bb2348 upstream.

The code to send the RX PN data (for each TID) to the firmware
has a devastating bug: it overwrites the data for TID 0 with
all the TID data, leaving the remaining TIDs zeroed. This will
allow replays to actually be accepted by the firmware, which
could allow waking up the system.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoath9k: declare required extra tx headroom
Felix Fietkau [Thu, 24 Sep 2015 14:59:46 +0000]
ath9k: declare required extra tx headroom

commit 029cd0370241641eb70235d205aa0b90c84dce44 upstream.

ath9k inserts padding between the 802.11 header and the data area (to
align it). Since it didn't declare this extra required headroom, this
led to some nasty issues like randomly dropped packets in some setups.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoLinux 3.10.92
Greg Kroah-Hartman [Tue, 27 Oct 2015 00:45:05 +0000]
Linux 3.10.92

4 years agorbd: fix double free on rbd_dev->header_name
Ilya Dryomov [Mon, 31 Aug 2015 12:21:39 +0000]
rbd: fix double free on rbd_dev->header_name

commit 3ebe138ac642a195c7f2efdb918f464734421fd6 upstream.

If rbd_dev_image_probe() in rbd_dev_probe_parent() fails, header_name
is freed twice: once in rbd_dev_probe_parent() and then in its caller
rbd_dev_image_probe() (rbd_dev_image_probe() is called recursively to
handle parent images).

rbd_dev_probe_parent() is responsible for probing the parent, so it
shouldn't muck with clone's fields.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agodm thin: fix missing pool reference count decrement in pool_ctr error path
Mike Snitzer [Tue, 13 Oct 2015 16:04:28 +0000]
dm thin: fix missing pool reference count decrement in pool_ctr error path

commit ba30670f4d5292c4e7f7980bbd5071f7c4794cdd upstream.

Fixes: ac8c3f3df ("dm thin: generate event when metadata threshold passed")
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoworkqueue: make sure delayed work run in local cpu
Shaohua Li [Wed, 30 Sep 2015 16:05:30 +0000]
workqueue: make sure delayed work run in local cpu

commit 874bbfe600a660cba9c776b3957b1ce393151b76 upstream.

My system keeps crashing with below message. vmstat_update() schedules a delayed
work in current cpu and expects the work runs in the cpu.
schedule_delayed_work() is expected to make delayed work run in local cpu. The
problem is timer can be migrated with NO_HZ. __queue_work() queues work in
timer handler, which could run in a different cpu other than where the delayed
work is scheduled. The end result is the delayed work runs in different cpu.
The patch makes __queue_delayed_work records local cpu earlier. Where the timer
runs doesn't change where the work runs with the change.

[   28.010131] ------------[ cut here ]------------
[   28.010609] kernel BUG at ../mm/vmstat.c:1392!
[   28.011099] invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN
[   28.011860] Modules linked in:
[   28.012245] CPU: 0 PID: 289 Comm: kworker/0:3 Tainted: G        W4.3.0-rc3+ #634
[   28.013065] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140709_153802- 04/01/2014
[   28.014160] Workqueue: events vmstat_update
[   28.014571] task: ffff880117682580 ti: ffff8800ba428000 task.ti: ffff8800ba428000
[   28.015445] RIP: 0010:[<ffffffff8115f921>]  [<ffffffff8115f921>]vmstat_update+0x31/0x80
[   28.016282] RSP: 0018:ffff8800ba42fd80  EFLAGS: 00010297
[   28.016812] RAX: 0000000000000000 RBX: ffff88011a858dc0 RCX:0000000000000000
[   28.017585] RDX: ffff880117682580 RSI: ffffffff81f14d8c RDI:ffffffff81f4df8d
[   28.018366] RBP: ffff8800ba42fd90 R08: 0000000000000001 R09:0000000000000000
[   28.019169] R10: 0000000000000000 R11: 0000000000000121 R12:ffff8800baa9f640
[   28.019947] R13: ffff88011a81e340 R14: ffff88011a823700 R15:0000000000000000
[   28.020071] FS:  0000000000000000(0000) GS:ffff88011a800000(0000)knlGS:0000000000000000
[   28.020071] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[   28.020071] CR2: 00007ff6144b01d0 CR3: 00000000b8e93000 CR4:00000000000006f0
[   28.020071] Stack:
[   28.020071]  ffff88011a858dc0 ffff8800baa9f640 ffff8800ba42fe00ffffffff8106bd88
[   28.020071]  ffffffff8106bd0b 0000000000000096 0000000000000000ffffffff82f9b1e8
[   28.020071]  ffffffff829f0b10 0000000000000000 ffffffff81f18460ffff88011a81e340
[   28.020071] Call Trace:
[   28.020071]  [<ffffffff8106bd88>] process_one_work+0x1c8/0x540
[   28.020071]  [<ffffffff8106bd0b>] ? process_one_work+0x14b/0x540
[   28.020071]  [<ffffffff8106c214>] worker_thread+0x114/0x460
[   28.020071]  [<ffffffff8106c100>] ? process_one_work+0x540/0x540
[   28.020071]  [<ffffffff81071bf8>] kthread+0xf8/0x110
[   28.020071]  [<ffffffff81071b00>] ?kthread_create_on_node+0x200/0x200
[   28.020071]  [<ffffffff81a6522f>] ret_from_fork+0x3f/0x70
[   28.020071]  [<ffffffff81071b00>] ?kthread_create_on_node+0x200/0x200

Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoi2c: rcar: enable RuntimePM before registering to the core
Wolfram Sang [Fri, 9 Oct 2015 09:39:25 +0000]
i2c: rcar: enable RuntimePM before registering to the core

commit 4f7effddf4549d57114289f273710f077c4c330a upstream.

The core may register clients attached to this master which may use
funtionality from the master. So, RuntimePM must be enabled before, otherwise
this will fail. While here, move drvdata, too.

Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agocrypto: ahash - ensure statesize is non-zero
Russell King [Fri, 9 Oct 2015 19:43:33 +0000]
crypto: ahash - ensure statesize is non-zero

commit 8996eafdcbad149ac0f772fb1649fbb75c482a6a upstream.

Unlike shash algorithms, ahash drivers must implement export
and import as their descriptors may contain hardware state and
cannot be exported as is.  Unfortunately some ahash drivers did
not provide them and end up causing crashes with algif_hash.

This patch adds a check to prevent these drivers from registering
ahash algorithms until they are fixed.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agocrypto: sparc - initialize blkcipher.ivsize
Dave Kleikamp [Mon, 5 Oct 2015 15:08:51 +0000]
crypto: sparc - initialize blkcipher.ivsize

commit a66d7f724a96d6fd279bfbd2ee488def6b081bea upstream.

Some of the crypto algorithms write to the initialization vector,
but no space has been allocated for it. This clobbers adjacent memory.

Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agom68k/uaccess: Fix asm constraints for userspace access
Geert Uytterhoeven [Sun, 9 Jun 2013 18:12:42 +0000]
m68k/uaccess: Fix asm constraints for userspace access

commit 631d8b674f5f8235e9cb7e628b0fe9e5200e3158 upstream.

When compiling a MMU kernel with CPU_HAS_ADDRESS_SPACES=n (e.g. "MMU=y
allnoconfig": "echo CONFIG_MMU=y > allno.config && make KCONFIG_ALLCONFIG=1
allnoconfig"), we use plain "move" instead of "moves", and I got:

CC arch/m68k/lib/uaccess.o
{standard input}: Assembler messages:
{standard input}:47: Error: operands mismatch -- statement `move.b %a0,(%a1)' ignored

This happens because plain "move" doesn't support byte transfers between
memory and address registers, while "moves" does.

Fix the asm constraints for __generic_copy_from_user(),
__generic_copy_to_user(), and __clear_user() to only use data registers
when accessing userspace.

Also, relax the asm constraints for 16-bit userspace accesses in
__put_user() and __get_user(), as both "move" and "moves" do support
such transfers between memory and address registers.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoasix: Do full reset during ax88772_bind
Charles Keepax [Thu, 6 Nov 2014 15:49:41 +0000]
asix: Do full reset during ax88772_bind

[ Upstream commit 436c2a5036b6ffe813310df2cf327d3b69be0734 ]

commit 3cc81d85ee01 ("asix: Don't reset PHY on if_up for ASIX 88772")
causes the ethernet on Arndale to no longer function. This appears to
be because the Arndale ethernet requires a full reset before it will
function correctly, however simply reverting the above patch causes
problems with ethtool settings getting reset.

It seems the problem is that the ethernet is not properly reset during
bind, and indeed the code in ax88772_bind that resets the device is a
very small subset of the actual ax88772_reset function. This patch uses
ax88772_reset in place of the existing reset code in ax88772_bind which
removes some code duplication and fixes the ethernet on Arndale.

It is still possible that the original patch causes some issues with
suspend and resume but that seems like a separate issue and I haven't
had a chance to test that yet.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Tested-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoasix: Don't reset PHY on if_up for ASIX 88772
Michel Stam [Thu, 2 Oct 2014 08:22:02 +0000]
asix: Don't reset PHY on if_up for ASIX 88772

[ Upstream commit 3cc81d85ee01e5a0b7ea2f4190e2ed1165f53c31 ]

I've noticed every time the interface is set to 'up,', the kernel
reports that the link speed is set to 100 Mbps/Full Duplex, even
when ethtool is used to set autonegotiation to 'off', half
duplex, 10 Mbps.
It can be tested by:
 ifconfig eth0 down
 ethtool -s eth0 autoneg off speed 10 duplex half
 ifconfig eth0 up

Then checking 'dmesg' for the link speed.

Signed-off-by: Michel Stam <m.stam@fugro.nl>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoethtool: Use kcalloc instead of kmalloc for ethtool_get_strings
Joe Perches [Wed, 14 Oct 2015 08:09:40 +0000]
ethtool: Use kcalloc instead of kmalloc for ethtool_get_strings

[ Upstream commit 077cb37fcf6f00a45f375161200b5ee0cd4e937b ]

It seems that kernel memory can leak into userspace by a
kmalloc, ethtool_get_strings, then copy_to_user sequence.

Avoid this by using kcalloc to zero fill the copied buffer.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoppp: don't override sk->sk_state in pppoe_flush_dev()
Guillaume Nault [Wed, 30 Sep 2015 09:45:33 +0000]
ppp: don't override sk->sk_state in pppoe_flush_dev()

[ Upstream commit e6740165b8f7f06d8caee0fceab3fb9d790a6fed ]

Since commit 2b018d57ff18 ("pppoe: drop PPPOX_ZOMBIEs in pppoe_release"),
pppoe_release() calls dev_put(po->pppoe_dev) if sk is in the
PPPOX_ZOMBIE state. But pppoe_flush_dev() can set sk->sk_state to
PPPOX_ZOMBIE _and_ reset po->pppoe_dev to NULL. This leads to the
following oops:

[  570.140800] BUG: unable to handle kernel NULL pointer dereference at 00000000000004e0
[  570.142931] IP: [<ffffffffa018c701>] pppoe_release+0x50/0x101 [pppoe]
[  570.144601] PGD 3d119067 PUD 3dbc1067 PMD 0
[  570.144601] Oops: 0000 [#1] SMP
[  570.144601] Modules linked in: l2tp_ppp l2tp_netlink l2tp_core ip6_udp_tunnel udp_tunnel pppoe pppox ppp_generic slhc loop crc32c_intel ghash_clmulni_intel jitterentropy_rng sha256_generic hmac drbg ansi_cprng aesni_intel aes_x86_64 ablk_helper cryptd lrw gf128mul glue_helper acpi_cpufreq evdev serio_raw processor button ext4 crc16 mbcache jbd2 virtio_net virtio_blk virtio_pci virtio_ring virtio
[  570.144601] CPU: 1 PID: 15738 Comm: ppp-apitest Not tainted 4.2.0 #1
[  570.144601] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Debian-1.8.2-1 04/01/2014
[  570.144601] task: ffff88003d30d600 ti: ffff880036b60000 task.ti: ffff880036b60000
[  570.144601] RIP: 0010:[<ffffffffa018c701>]  [<ffffffffa018c701>] pppoe_release+0x50/0x101 [pppoe]
[  570.144601] RSP: 0018:ffff880036b63e08  EFLAGS: 00010202
[  570.144601] RAX: 0000000000000000 RBX: ffff880034340000 RCX: 0000000000000206
[  570.144601] RDX: 0000000000000006 RSI: ffff88003d30dd20 RDI: ffff88003d30dd20
[  570.144601] RBP: ffff880036b63e28 R08: 0000000000000001 R09: 0000000000000000
[  570.144601] R10: 00007ffee9b50420 R11: ffff880034340078 R12: ffff8800387ec780
[  570.144601] R13: ffff8800387ec7b0 R14: ffff88003e222aa0 R15: ffff8800387ec7b0
[  570.144601] FS:  00007f5672f48700(0000) GS:ffff88003fc80000(0000) knlGS:0000000000000000
[  570.144601] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  570.144601] CR2: 00000000000004e0 CR3: 0000000037f7e000 CR4: 00000000000406a0
[  570.144601] Stack:
[  570.144601]  ffffffffa018f240 ffff8800387ec780 ffffffffa018f240 ffff8800387ec7b0
[  570.144601]  ffff880036b63e48 ffffffff812caabe ffff880039e4e000 0000000000000008
[  570.144601]  ffff880036b63e58 ffffffff812cabad ffff880036b63ea8 ffffffff811347f5
[  570.144601] Call Trace:
[  570.144601]  [<ffffffff812caabe>] sock_release+0x1a/0x75
[  570.144601]  [<ffffffff812cabad>] sock_close+0xd/0x11
[  570.144601]  [<ffffffff811347f5>] __fput+0xff/0x1a5
[  570.144601]  [<ffffffff811348cb>] ____fput+0x9/0xb
[  570.144601]  [<ffffffff81056682>] task_work_run+0x66/0x90
[  570.144601]  [<ffffffff8100189e>] prepare_exit_to_usermode+0x8c/0xa7
[  570.144601]  [<ffffffff81001a26>] syscall_return_slowpath+0x16d/0x19b
[  570.144601]  [<ffffffff813babb1>] int_ret_from_sys_call+0x25/0x9f
[  570.144601] Code: 48 8b 83 c8 01 00 00 a8 01 74 12 48 89 df e8 8b 27 14 e1 b8 f7 ff ff ff e9 b7 00 00 00 8a 43 12 a8 0b 74 1c 48 8b 83 a8 04 00 00 <48> 8b 80 e0 04 00 00 65 ff 08 48 c7 83 a8 04 00 00 00 00 00 00
[  570.144601] RIP  [<ffffffffa018c701>] pppoe_release+0x50/0x101 [pppoe]
[  570.144601]  RSP <ffff880036b63e08>
[  570.144601] CR2: 00000000000004e0
[  570.200518] ---[ end trace 46956baf17349563 ]---

pppoe_flush_dev() has no reason to override sk->sk_state with
PPPOX_ZOMBIE. pppox_unbind_sock() already sets sk->sk_state to
PPPOX_DEAD, which is the correct state given that sk is unbound and
po->pppoe_dev is NULL.

Fixes: 2b018d57ff18 ("pppoe: drop PPPOX_ZOMBIEs in pppoe_release")
Tested-by: Oleksii Berezhniak <core@irc.lg.ua>
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agonet: add pfmemalloc check in sk_add_backlog()
Eric Dumazet [Wed, 30 Sep 2015 01:52:25 +0000]
net: add pfmemalloc check in sk_add_backlog()

[ Upstream commit c7c49b8fde26b74277188bdc6c9dca38db6fa35b ]

Greg reported crashes hitting the following check in __sk_backlog_rcv()

BUG_ON(!sock_flag(sk, SOCK_MEMALLOC));

The pfmemalloc bit is currently checked in sk_filter().

This works correctly for TCP, because sk_filter() is ran in
tcp_v[46]_rcv() before hitting the prequeue or backlog checks.

For UDP or other protocols, this does not work, because the sk_filter()
is ran from sock_queue_rcv_skb(), which might be called _after_ backlog
queuing if socket is owned by user by the time packet is processed by
softirq handler.

Fixes: b4b9e35585089 ("netvm: set PF_MEMALLOC as appropriate during SKB processing")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Greg Thelen <gthelen@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoskbuff: Fix skb checksum partial check.
Pravin B Shelar [Tue, 29 Sep 2015 00:24:25 +0000]
skbuff: Fix skb checksum partial check.

[ Upstream commit 31b33dfb0a144469dd805514c9e63f4993729a48 ]

Earlier patch 6ae459bda tried to detect void ckecksum partial
skb by comparing pull length to checksum offset. But it does
not work for all cases since checksum-offset depends on
updates to skb->data.

Following patch fixes it by validating checksum start offset
after skb-data pointer is updated. Negative value of checksum
offset start means there is no need to checksum.

Fixes: 6ae459bda ("skbuff: Fix skb checksum flag on skb pull")
Reported-by: Andrew Vagin <avagin@odin.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoskbuff: Fix skb checksum flag on skb pull
Pravin B Shelar [Tue, 22 Sep 2015 19:57:53 +0000]
skbuff: Fix skb checksum flag on skb pull

[ Upstream commit 6ae459bdaaeebc632b16e54dcbabb490c6931d61 ]

VXLAN device can receive skb with checksum partial. But the checksum
offset could be in outer header which is pulled on receive. This results
in negative checksum offset for the skb. Such skb can cause the assert
failure in skb_checksum_help(). Following patch fixes the bug by setting
checksum-none while pulling outer header.

Following is the kernel panic msg from old kernel hitting the bug.

------------[ cut here ]------------
kernel BUG at net/core/dev.c:1906!
RIP: 0010:[<ffffffff81518034>] skb_checksum_help+0x144/0x150
Call Trace:
[<ffffffffa0164c28>] queue_userspace_packet+0x408/0x470 [openvswitch]
[<ffffffffa016614d>] ovs_dp_upcall+0x5d/0x60 [openvswitch]
[<ffffffffa0166236>] ovs_dp_process_packet_with_key+0xe6/0x100 [openvswitch]
[<ffffffffa016629b>] ovs_dp_process_received_packet+0x4b/0x80 [openvswitch]
[<ffffffffa016c51a>] ovs_vport_receive+0x2a/0x30 [openvswitch]
[<ffffffffa0171383>] vxlan_rcv+0x53/0x60 [openvswitch]
[<ffffffffa01734cb>] vxlan_udp_encap_recv+0x8b/0xf0 [openvswitch]
[<ffffffff8157addc>] udp_queue_rcv_skb+0x2dc/0x3b0
[<ffffffff8157b56f>] __udp4_lib_rcv+0x1cf/0x6c0
[<ffffffff8157ba7a>] udp_rcv+0x1a/0x20
[<ffffffff8154fdbd>] ip_local_deliver_finish+0xdd/0x280
[<ffffffff81550128>] ip_local_deliver+0x88/0x90
[<ffffffff8154fa7d>] ip_rcv_finish+0x10d/0x370
[<ffffffff81550365>] ip_rcv+0x235/0x300
[<ffffffff8151ba1d>] __netif_receive_skb+0x55d/0x620
[<ffffffff8151c360>] netif_receive_skb+0x80/0x90
[<ffffffff81459935>] virtnet_poll+0x555/0x6f0
[<ffffffff8151cd04>] net_rx_action+0x134/0x290
[<ffffffff810683d8>] __do_softirq+0xa8/0x210
[<ffffffff8162fe6c>] call_softirq+0x1c/0x30
[<ffffffff810161a5>] do_softirq+0x65/0xa0
[<ffffffff810687be>] irq_exit+0x8e/0xb0
[<ffffffff81630733>] do_IRQ+0x63/0xe0
[<ffffffff81625f2e>] common_interrupt+0x6e/0x6e

Reported-by: Anupam Chanda <achanda@vmware.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Acked-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoaf_unix: return data from multiple SKBs on recv() with MSG_PEEK flag
Aaron Conole [Sat, 26 Sep 2015 22:50:43 +0000]
af_unix: return data from multiple SKBs on recv() with MSG_PEEK flag

[ Upstream commit 9f389e35674f5b086edd70ed524ca0f287259725 ]

AF_UNIX sockets now return multiple skbs from recv() when MSG_PEEK flag
is set.

This is referenced in kernel bugzilla #12323 @

As described both in the BZ and lkml thread @
http://lkml.org/lkml/2008/1/8/444 calling recv() with MSG_PEEK on an
AF_UNIX socket only reads a single skb, where the desired effect is
to return as much skb data has been queued, until hitting the recv
buffer size (whichever comes first).

The modified MSG_PEEK path will now move to the next skb in the tree
and jump to the again: label, rather than following the natural loop
structure. This requires duplicating some of the loop head actions.

This was tested using the python socketpair python code attached to
the bugzilla issue.

Signed-off-by: Aaron Conole <aconole@bytheb.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoaf_unix: Convert the unix_sk macro to an inline function for type safety
Aaron Conole [Sat, 26 Sep 2015 22:50:42 +0000]
af_unix: Convert the unix_sk macro to an inline function for type safety

[ Upstream commit 4613012db1d911f80897f9446a49de817b2c4c47 ]

As suggested by Eric Dumazet this change replaces the
#define with a static inline function to enjoy
complaints by the compiler when misusing the API.

Signed-off-by: Aaron Conole <aconole@bytheb.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agol2tp: protect tunnel->del_work by ref_count
Alexander Couzens [Mon, 28 Sep 2015 09:32:42 +0000]
l2tp: protect tunnel->del_work by ref_count

[ Upstream commit 06a15f51cf3618e32a73871ee6a547ef7fd902b5 ]

There is a small chance that tunnel_free() is called before tunnel->del_work scheduled
resulting in a zero pointer dereference.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Acked-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoLinux 3.10.91
Greg Kroah-Hartman [Thu, 22 Oct 2015 21:38:04 +0000]
Linux 3.10.91

4 years ago3w-9xxx: don't unmap bounce buffered commands
Christoph Hellwig [Sat, 3 Oct 2015 17:16:07 +0000]
3w-9xxx: don't unmap bounce buffered commands

commit 15e3d5a285ab9283136dba34bbf72886d9146706 upstream.

3w controller don't dma map small single SGL entry commands but instead
bounce buffer them.  Add a helper to identify these commands and don't
call scsi_dma_unmap for them.

Based on an earlier patch from James Bottomley.

Fixes: 118c85 ("3w-9xxx: fix command completion race")
Reported-by: Tóth Attila <atoth@atoth.sote.hu>
Tested-by: Tóth Attila <atoth@atoth.sote.hu>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Adam Radford <aradford@gmail.com>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agostaging: speakup: fix speakup-r regression
covici@ccs.covici.com [Wed, 20 May 2015 09:44:11 +0000]
staging: speakup: fix speakup-r regression

commit b1d562acc78f0af46de0dfe447410bc40bdb7ece upstream.

Here is a patch to make speakup-r work again.

It broke in 3.6 due to commit 4369c64c79a22b98d3b7eff9d089196cd878a10a
"Input: Send events one packet at a time)

The problem was that the fakekey.c routine to fake a down arrow no
longer functioned properly and putting the input_sync fixed it.

Fixes: 4369c64c79a22b98d3b7eff9d089196cd878a10a
Acked-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: John Covici <covici@ccs.covici.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agodm cache: fix NULL pointer when switching from cleaner policy
Joe Thornber [Fri, 9 Oct 2015 13:03:38 +0000]
dm cache: fix NULL pointer when switching from cleaner policy

commit 2bffa1503c5c06192eb1459180fac4416575a966 upstream.

The cleaner policy doesn't make use of the per cache block hint space in
the metadata (unlike the other policies).  When switching from the
cleaner policy to mq or smq a NULL pointer crash (in dm_tm_new_block)
was observed.  The crash was caused by bugs in dm-cache-metadata.c
when trying to skip creation of the hint btree.

The minimal fix is to change hint size for the cleaner policy to 4 bytes
(only hint size supported).

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agox86: Add 1/2/4/8 byte optimization to 64bit __copy_{from,to}_user_inatomic
Andi Kleen [Fri, 16 Aug 2013 21:17:19 +0000]
x86: Add 1/2/4/8 byte optimization to 64bit __copy_{from,to}_user_inatomic

commit ff47ab4ff3cddfa7bc1b25b990e24abe2ae474ff upstream.

The 64bit __copy_{from,to}_user_inatomic always called
copy_from_user_generic, but skipped the special optimizations for 1/2/4/8
byte accesses.

This especially hurts the futex call, which accesses the 4 byte futex
user value with a complicated fast string operation in a function call,
instead of a single movl.

Use __copy_{from,to}_user for _inatomic instead to get the same
optimizations. The only problem was the might_fault() in those functions.
So move that to new wrapper and call __copy_{f,t}_user_nocheck()
from *_inatomic directly.

32bit already did this correctly by duplicating the code.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1376687844-19857-2-git-send-email-andi@firstfloor.org
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agogenirq: Fix race in register_irq_proc()
Ben Hutchings [Sat, 26 Sep 2015 11:23:56 +0000]
genirq: Fix race in register_irq_proc()

commit 95c2b17534654829db428f11bcf4297c059a2a7e upstream.

Per-IRQ directories in procfs are created only when a handler is first
added to the irqdesc, not when the irqdesc is created.  In the case of
a shared IRQ, multiple tasks can race to create a directory.  This
race condition seems to have been present forever, but is easier to
hit with async probing.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Link: http://lkml.kernel.org/r/1443266636.2004.2.camel@decadent.org.uk
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agofib_rules: Fix dump_rules() not to exit early
Roland Dreier [Mon, 5 Oct 2015 17:29:28 +0000]
fib_rules: Fix dump_rules() not to exit early

Backports of 41fc014332d9 ("fib_rules: fix fib rule dumps across
multiple skbs") introduced a regression in "ip rule show" - it ends up
dumping the first rule over and over and never exiting, because 3.19
and earlier are missing commit 053c095a82cf ("netlink: make
nlmsg_end() and genlmsg_end() void"), so fib_nl_fill_rule() ends up
returning skb->len (i.e. > 0) in the success case.

Fix this by checking the return code for < 0 instead of != 0.

Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agobonding: correct the MAC address for "follow" fail_over_mac policy
dingtianhong [Thu, 16 Jul 2015 08:30:02 +0000]
bonding: correct the MAC address for "follow" fail_over_mac policy

[ Upstream commit a951bc1e6ba58f11df5ed5ddc41311e10f5fd20b ]

The "follow" fail_over_mac policy is useful for multiport devices that
either become confused or incur a performance penalty when multiple
ports are programmed with the same MAC address, but the same MAC
address still may happened by this steps for this policy:

1) echo +eth0 > /sys/class/net/bond0/bonding/slaves
   bond0 has the same mac address with eth0, it is MAC1.

2) echo +eth1 > /sys/class/net/bond0/bonding/slaves
   eth1 is backup, eth1 has MAC2.

3) ifconfig eth0 down
   eth1 became active slave, bond will swap MAC for eth0 and eth1,
   so eth1 has MAC1, and eth0 has MAC2.

4) ifconfig eth1 down
   there is no active slave, and eth1 still has MAC1, eth2 has MAC2.

5) ifconfig eth0 up
   the eth0 became active slave again, the bond set eth0 to MAC1.

Something wrong here, then if you set eth1 up, the eth0 and eth1 will have the same
MAC address, it will break this policy for ACTIVE_BACKUP mode.

This patch will fix this problem by finding the old active slave and
swap them MAC address before change active slave.

Signed-off-by: Ding Tianhong <dingtianhong@huawei.com>
Tested-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[bwh: Backported to 3.10: bond_for_each_slave() takes an extra int paramter]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agom68k: Define asmlinkage_protect
Andreas Schwab [Wed, 23 Sep 2015 21:12:09 +0000]
m68k: Define asmlinkage_protect

commit 8474ba74193d302e8340dddd1e16c85cc4b98caf upstream.

Make sure the compiler does not modify arguments of syscall functions.
This can happen if the compiler generates a tailcall to another
function.  For example, without asmlinkage_protect sys_openat is compiled
into this function:

clr.l %d0
move.w 18(%sp),%d0
move.l %d0,16(%sp)
jbra do_sys_open

Note how the fourth argument is modified in place, modifying the register
%d4 that gets restored from this stack slot when the function returns to
user-space.  The caller may expect the register to be unmodified across
system calls.

Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoarm64: readahead: fault retry breaks mmap file read random detection
Mark Salyzyn [Mon, 21 Sep 2015 20:39:50 +0000]
arm64: readahead: fault retry breaks mmap file read random detection

commit 569ba74a7ba69f46ce2950bf085b37fea2408385 upstream.

This is the arm64 portion of commit 45cac65b0fcd ("readahead: fault
retry breaks mmap file read random detection"), which was absent from
the initial port and has since gone unnoticed. The original commit says:

> .fault now can retry.  The retry can break state machine of .fault.  In
> filemap_fault, if page is miss, ra->mmap_miss is increased.  In the second
> try, since the page is in page cache now, ra->mmap_miss is decreased.  And
> these are done in one fault, so we can't detect random mmap file access.
> Add a new flag to indicate .fault is tried once.  In the second try, skip
> ra->mmap_miss decreasing.  The filemap_fault state machine is ok with it.

With this change, Mark reports that:

> Random read improves by 250%, sequential read improves by 40%, and
> random write by 400% to an eMMC device with dm crypto wrapped around it.

Cc: Shaohua Li <shli@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Mark Salyzyn <salyzyn@android.com>
Signed-off-by: Riley Andrews <riandrews@android.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agovfs: Test for and handle paths that are unreachable from their mnt_root
Eric W. Biederman [Sun, 16 Aug 2015 01:27:13 +0000]
vfs: Test for and handle paths that are unreachable from their mnt_root

commit 397d425dc26da728396e66d392d5dcb8dac30c37 upstream.

In rare cases a directory can be renamed out from under a bind mount.
In those cases without special handling it becomes possible to walk up
the directory tree to the root dentry of the filesystem and down
from the root dentry to every other file or directory on the filesystem.

Like division by zero .. from an unconnected path can not be given
a useful semantic as there is no predicting at which path component
the code will realize it is unconnected.  We certainly can not match
the current behavior as the current behavior is a security hole.

Therefore when encounting .. when following an unconnected path
return -ENOENT.

- Add a function path_connected to verify path->dentry is reachable
  from path->mnt.mnt_root.  AKA to validate that rename did not do
  something nasty to the bind mount.

  To avoid races path_connected must be called after following a path
  component to it's next path component.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agodcache: Handle escaped paths in prepend_path
Eric W. Biederman [Sat, 15 Aug 2015 18:36:12 +0000]
dcache: Handle escaped paths in prepend_path

commit cde93be45a8a90d8c264c776fab63487b5038a65 upstream.

A rename can result in a dentry that by walking up d_parent
will never reach it's mnt_root.  For lack of a better term
I call this an escaped path.

prepend_path is called by four different functions __d_path,
d_absolute_path, d_path, and getcwd.

__d_path only wants to see paths are connected to the root it passes
in.  So __d_path needs prepend_path to return an error.

d_absolute_path similarly wants to see paths that are connected to
some root.  Escaped paths are not connected to any mnt_root so
d_absolute_path needs prepend_path to return an error greater
than 1.  So escaped paths will be treated like paths on lazily
unmounted mounts.

getcwd needs to prepend "(unreachable)" so getcwd also needs
prepend_path to return an error.

d_path is the interesting hold out.  d_path just wants to print
something, and does not care about the weird cases.  Which raises
the question what should be printed?

Given that <escaped_path>/<anything> should result in -ENOENT I
believe it is desirable for escaped paths to be printed as empty
paths.  As there are not really any meaninful path components when
considered from the perspective of a mount tree.

So tweak prepend_path to return an empty path with an new error
code of 3 when it encounters an escaped path.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoIB/qib: Change lkey table allocation to support more MRs
Mike Marciniszyn [Tue, 21 Jul 2015 12:36:07 +0000]
IB/qib: Change lkey table allocation to support more MRs

commit d6f1c17e162b2a11e708f28fa93f2f79c164b442 upstream.

The lkey table is allocated with with a get_user_pages() with an
order based on a number of index bits from a module parameter.

The underlying kernel code cannot allocate that many contiguous pages.

There is no reason the underlying memory needs to be physically

This patch:
- switches the allocation/deallocation to vmalloc/vfree
- caps the number of bits to 23 to insure at least 1 generation bit
  o this matches the module parameter description

Reviewed-by: Vinit Agnihotri <vinit.abhay.agnihotri@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoUBI: return ENOSPC if no enough space available
shengyong [Mon, 28 Sep 2015 17:57:19 +0000]
UBI: return ENOSPC if no enough space available

commit 7c7feb2ebfc9c0552c51f0c050db1d1a004faac5 upstream.

UBI: attaching mtd1 to ubi0
UBI: scanning is finished
UBI error: init_volumes: not enough PEBs, required 706, available 686
UBI error: ubi_wl_init: no enough physical eraseblocks (-20, need 1)
UBI error: ubi_attach_mtd_dev: failed to attach mtd1, error -12 <= NOT ENOMEM
UBI error: ubi_init: cannot attach mtd1

If available PEBs are not enough when initializing volumes, return -ENOSPC
directly. If available PEBs are not enough when initializing WL, return
-ENOSPC instead of -ENOMEM.

Signed-off-by: Sheng Yong <shengyong1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Reviewed-by: David Gstir <david@sigma-star.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoUBI: Validate data_size
Richard Weinberger [Tue, 22 Sep 2015 21:58:07 +0000]
UBI: Validate data_size

commit 281fda27673f833a01d516658a64d22a32c8e072 upstream.

Make sure that data_size is less than LEB size.
Otherwise a handcrafted UBI image is able to trigger
an out of bounds memory access in ubi_compare_lebs().

Signed-off-by: Richard Weinberger <richard@nod.at>
Reviewed-by: David Gstir <david@sigma-star.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agopowerpc/MSI: Fix race condition in tearing down MSI interrupts
Paul Mackerras [Thu, 10 Sep 2015 04:36:21 +0000]
powerpc/MSI: Fix race condition in tearing down MSI interrupts

commit e297c939b745e420ef0b9dc989cb87bda617b399 upstream.

This fixes a race which can result in the same virtual IRQ number
being assigned to two different MSI interrupts.  The most visible
consequence of that is usually a warning and stack trace from the
sysfs code about an attempt to create a duplicate entry in sysfs.

The race happens when one CPU (say CPU 0) is disposing of an MSI
while another CPU (say CPU 1) is setting up an MSI.  CPU 0 calls
(for example) pnv_teardown_msi_irqs(), which calls
msi_bitmap_free_hwirqs() to indicate that the MSI (i.e. its
hardware IRQ number) is no longer in use.  Then, before CPU 0 gets
to calling irq_dispose_mapping() to free up the virtal IRQ number,
CPU 1 comes in and calls msi_bitmap_alloc_hwirqs() to allocate an
MSI, and gets the same hardware IRQ number that CPU 0 just freed.
CPU 1 then calls irq_create_mapping() to get a virtual IRQ number,
which sees that there is currently a mapping for that hardware IRQ
number and returns the corresponding virtual IRQ number (which is
the same virtual IRQ number that CPU 0 was using).  CPU 0 then
calls irq_dispose_mapping() and frees that virtual IRQ number.
Now, if another CPU comes along and calls irq_create_mapping(), it
is likely to get the virtual IRQ number that was just freed,
resulting in the same virtual IRQ number apparently being used for
two different hardware interrupts.

To fix this race, we just move the call to msi_bitmap_free_hwirqs()
to after the call to irq_dispose_mapping().  Since virq_to_hw()
doesn't work for the virtual IRQ number after irq_dispose_mapping()
has been called, we need to call it before irq_dispose_mapping() and
remember the result for the msi_bitmap_free_hwirqs() call.

The pattern of calling msi_bitmap_free_hwirqs() before
irq_dispose_mapping() appears in 5 places under arch/powerpc, and
appears to have originated in commit 05af7bd2d75e ("[POWERPC] MPIC
U3/U4 MSI backend") from 2007.

Fixes: 05af7bd2d75e ("[POWERPC] MPIC U3/U4 MSI backend")
Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agomd: flush ->event_work before stopping array.
NeilBrown [Wed, 22 Jul 2015 00:20:07 +0000]
md: flush ->event_work before stopping array.

commit ee5d004fd0591536a061451eba2b187092e9127c upstream.

The 'event_work' worker used by dm-raid may still be running
when the array is stopped.  This can result in an oops.

So flush the workqueue on which it is run after detaching
and before destroying the device.

Reported-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Fixes: 9d09e663d550 ("dm: raid456 basic support")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoMIPS: dma-default: Fix 32-bit fall back to GFP_DMA
James Hogan [Fri, 27 Mar 2015 08:33:43 +0000]
MIPS: dma-default: Fix 32-bit fall back to GFP_DMA

commit 53960059d56ecef67d4ddd546731623641a3d2d1 upstream.

If there is a DMA zone (usually 24bit = 16MB I believe), but no DMA32
zone, as is the case for some 32-bit kernels, then massage_gfp_flags()
will cause DMA memory allocated for devices with a 32..63-bit
coherent_dma_mask to fall back to using __GFP_DMA, even though there may
only be 32-bits of physical address available anyway.

Correct that case to compare against a mask the size of phys_addr_t
instead of always using a 64-bit mask.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Fixes: a2e715a86c6d ("MIPS: DMA: Fix computation of DMA flags from device's coherent_dma_mask.")
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9610/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoUSB: Add reset-resume quirk for two Plantronics usb headphones.
Yao-Wen Mao [Mon, 31 Aug 2015 06:24:09 +0000]
USB: Add reset-resume quirk for two Plantronics usb headphones.

commit 8484bf2981b3d006426ac052a3642c9ce1d8d980 upstream.

These two headphones need a reset-resume quirk to properly resume to
original volume level.

Signed-off-by: Yao-Wen Mao <yaowen@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agousb: Add device quirk for Logitech PTZ cameras
Vincent Palatin [Thu, 1 Oct 2015 21:10:22 +0000]
usb: Add device quirk for Logitech PTZ cameras

commit 72194739f54607bbf8cfded159627a2015381557 upstream.

Add a device quirk for the Logitech PTZ Pro Camera and its sibling the
ConferenceCam CC3000e Camera.
This fixes the failed camera enumeration on some boot, particularly on
machines with fast CPU.

Tested by connecting a Logitech PTZ Pro Camera to a machine with a
Haswell Core i7-4600U CPU @ 2.10GHz, and doing thousands of reboot cycles
while recording the kernel logs and taking camera picture after each boot.
Before the patch, more than 7% of the boots show some enumeration transfer
failures and in a few of them, the kernel is giving up before actually
enumerating the webcam. After the patch, the enumeration has been correct
on every reboot.

Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agousb: Use the USB_SS_MULT() macro to get the burst multiplier.
Mathias Nyman [Mon, 21 Sep 2015 14:46:09 +0000]
usb: Use the USB_SS_MULT() macro to get the burst multiplier.

commit ff30cbc8da425754e8ab96904db1d295bd034f27 upstream.

Bits 1:0 of the bmAttributes are used for the burst multiplier.
The rest of the bits used to be reserved (zero), but USB3.1 takes bit 7
into use.

Use the existing USB_SS_MULT() macro instead to make sure the mult value
and hence max packet calculations are correct for USB3.1 devices.

Note that burst multiplier in bmAttributes is zero based and that
the USB_SS_MULT() macro adds one.

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agosecurity: fix typo in security_task_prctl
Jann Horn [Fri, 18 Sep 2015 21:41:23 +0000]
security: fix typo in security_task_prctl

commit b7f76ea2ef6739ee484a165ffbac98deb855d3d3 upstream.

Signed-off-by: Jann Horn <jann@thejh.net>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoregmap: debugfs: Don't bother actually printing when calculating max length
Mark Brown [Sat, 19 Sep 2015 14:12:34 +0000]
regmap: debugfs: Don't bother actually printing when calculating max length

commit 176fc2d5770a0990eebff903ba680d2edd32e718 upstream.

The in kernel snprintf() will conveniently return the actual length of
the printed string even if not given an output beffer at all so just do
that rather than relying on the user to pass in a suitable buffer,
ensuring that we don't need to worry if the buffer was truncated due to
the size of the buffer passed in.

Reported-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoregmap: debugfs: Ensure we don't underflow when printing access masks
Mark Brown [Sat, 19 Sep 2015 14:00:18 +0000]
regmap: debugfs: Ensure we don't underflow when printing access masks

commit b763ec17ac762470eec5be8ebcc43e4f8b2c2b82 upstream.

If a read is attempted which is smaller than the line length then we may
underflow the subtraction we're doing with the unsigned size_t type so
move some of the calculation to be additions on the right hand side
instead in order to avoid this.

Reported-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoudf: Check length of extended attributes and allocation descriptors
Jan Kara [Wed, 7 Jan 2015 12:49:08 +0000]
udf: Check length of extended attributes and allocation descriptors

commit 23b133bdc452aa441fcb9b82cbf6dd05cfd342d0 upstream.

Check length of extended attributes and allocation descriptors when
loading inodes from disk. Otherwise corrupted filesystems could confuse
the code and make the kernel oops.

Reported-by: Carl Henrik Lunde <chlunde@ping.uio.no>
Cc: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
[Jan and Jiri fixed it in 3.12 stable, i ported it to 3.10 stable,
 replaced bs by inode->i_sb->s_blocksize]
Signed-off-by: Zhang Zhen <zhenzhang.zhang@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoipvs: fix crash with sync protocol v0 and FTP
Julian Anastasov [Wed, 8 Jul 2015 05:31:33 +0000]
ipvs: fix crash with sync protocol v0 and FTP

commit 56184858d1fc95c46723436b455cb7261cd8be6f upstream.

Fix crash in 3.5+ if FTP is used after switching
sync_version to 0.

Fixes: 749c42b620a9 ("ipvs: reduce sync rate with time thresholds")
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoipvs: do not use random local source address for tunnels
Julian Anastasov [Sat, 27 Jun 2015 11:39:30 +0000]
ipvs: do not use random local source address for tunnels

commit 4754957f04f5f368792a0eb7dab0ae89fb93dcfd upstream.

Michael Vallaly reports about wrong source address used
in rare cases for tunneled traffic. Looks like
__ip_vs_get_out_rt in 3.10+ is providing uninitialized
dest_dst->dst_saddr.ip because ip_vs_dest_dst_alloc uses
kmalloc. While we retry after seeing EINVAL from routing
for data that does not look like valid local address, it
still succeeded when this memory was previously used from
other dests and with different local addresses. As result,
we can use valid local address that is not suitable for
our real server.

Fix it by providing every time our cache is refreshed.
By this way we will get preferred source address from routing.

Reported-by: Michael Vallaly <lvs@nolatency.com>
Fixes: 026ace060dfe ("ipvs: optimize dst usage for real server")
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoInitialize msg/shm IPC objects before doing ipc_addid()
Linus Torvalds [Wed, 30 Sep 2015 16:48:40 +0000]
Initialize msg/shm IPC objects before doing ipc_addid()

commit b9a532277938798b53178d5a66af6e2915cb27cf upstream.

As reported by Dmitry Vyukov, we really shouldn't do ipc_addid() before
having initialized the IPC object state.  Yes, we initialize the IPC
object in a locked state, but with all the lockless RCU lookup work,
that IPC object lock no longer means that the state cannot be seen.

We already did this for the IPC semaphore code (see commit e8577d1f0329:
"ipc/sem.c: fully initialize sem_array before making it visible") but we
clearly forgot about msg and shm.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agousb: xhci: Add support for URB_ZERO_PACKET to bulk/sg transfers
Reyad Attiyat [Thu, 6 Aug 2015 16:23:58 +0000]
usb: xhci: Add support for URB_ZERO_PACKET to bulk/sg transfers

commit 4758dcd19a7d9ba9610b38fecb93f65f56f86346 upstream.

This commit checks for the URB_ZERO_PACKET flag and creates an extra
zero-length td if the urb transfer length is a multiple of the endpoint's
max packet length.

Signed-off-by: Reyad Attiyat <reyad.attiyat@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Cc: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoxhci: change xhci 1.0 only restrictions to support xhci 1.1
Mathias Nyman [Mon, 21 Sep 2015 14:46:16 +0000]
xhci: change xhci 1.0 only restrictions to support xhci 1.1

commit dca7794539eff04b786fb6907186989e5eaaa9c2 upstream.

Some changes between xhci 0.96 and xhci 1.0 specifications forced us to
check the hci version in code, some of these checks were implemented as
hci_version == 1.0, which will not work with new xhci 1.1 controllers.

xhci 1.1 behaves similar to xhci 1.0 in these cases, so change these
checks to hci_version >= 1.0

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agousb: xhci: Clear XHCI_STATE_DYING on start
Roger Quadros [Mon, 21 Sep 2015 14:46:13 +0000]
usb: xhci: Clear XHCI_STATE_DYING on start

commit e5bfeab0ad515b4f6df39fe716603e9dc6d3dfd0 upstream.

For whatever reason if XHCI died in the previous instant
then it will never recover on the next xhci_start unless we
clear the DYING flag.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoUSB: whiteheat: fix potential null-deref at probe
Johan Hovold [Wed, 23 Sep 2015 18:41:42 +0000]
USB: whiteheat: fix potential null-deref at probe

commit cbb4be652d374f64661137756b8f357a1827d6a4 upstream.

Fix potential null-pointer dereference at probe by making sure that the
required endpoints are present.

The whiteheat driver assumes there are at least five pairs of bulk
endpoints, of which the final pair is used for the "command port". An
attempt to bind to an interface with fewer bulk endpoints would
currently lead to an oops.

Fixes CVE-2015-5257.

Reported-by: Moein Ghasemzadeh <moein@istuary.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agodrm: Reject DRI1 hw lock ioctl functions for kms drivers
Daniel Vetter [Tue, 23 Jun 2015 09:34:21 +0000]
drm: Reject DRI1 hw lock ioctl functions for kms drivers

commit da168d81b44898404d281d5dbe70154ab5f117c1 upstream.

I've done some extensive history digging across libdrm, mesa and
xf86-video-{intel,nouveau,ati}. The only potential user of this with
kms drivers I could find was ttmtest, which once used drmGetLock
still. But that mistake was quickly fixed up. Even the intel xvmc
library (which otherwise was really good with using dri1 stuff in kms
mode) managed to never take the hw lock for dri2 (and hence kms).

Hence it should be save to unconditionally disallow this.

Cc: Peter Antoine <peter.antoine@intel.com>
Reviewed-by: Peter Antoine <peter.antoine@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agodisabling oplocks/leases via module parm enable_oplocks broken for SMB3
Steve French [Tue, 22 Sep 2015 14:29:38 +0000]
disabling oplocks/leases via module parm enable_oplocks broken for SMB3

commit e0ddde9d44e37fbc21ce893553094ecf1a633ab5 upstream.

leases (oplocks) were always requested for SMB2/SMB3 even when oplocks
disabled in the cifs.ko module.

Signed-off-by: Steve French <steve.french@primarydata.com>
Reviewed-by: Chandrika Srinivasan <chandrika.srinivasan@citrix.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agonetfilter: nf_conntrack: Support expectations in different zones
Joe Stringer [Wed, 22 Jul 2015 04:37:31 +0000]
netfilter: nf_conntrack: Support expectations in different zones

commit 4b31814d20cbe5cd4ccf18089751e77a04afe4f2 upstream.

When zones were originally introduced, the expectation functions were
all extended to perform lookup using the zone. However, insertion was
not modified to check the zone. This means that two expectations which
are intended to apply for different connections that have the same tuple
but exist in different zones cannot both be tracked.

Fixes: 5d0aa2ccd4 (netfilter: nf_conntrack: add support for "conntrack zones")
Signed-off-by: Joe Stringer <joestringer@nicira.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agodm raid: fix round up of default region size
Mikulas Patocka [Fri, 2 Oct 2015 15:17:37 +0000]
dm raid: fix round up of default region size

commit 042745ee53a0a7c1f5aff191a4a24213c6dcfb52 upstream.

Commit 3a0f9aaee028 ("dm raid: round region_size to power of two")
intended to make sure that the default region size is a power of two.
However, the logic in that commit is incorrect and sets the variable
region_size to 0 or 1, depending on whether min_region_size is a power
of two.

Fix this logic, using roundup_pow_of_two(), so that region_size is
properly rounded up to the next power of two.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Fixes: 3a0f9aaee028 ("dm raid: round region_size to power of two")
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoUSB: option: add ZTE PIDs
Liu.Zhao [Mon, 24 Aug 2015 15:36:12 +0000]
USB: option: add ZTE PIDs

commit 19ab6bc5674a30fdb6a2436b068d19a3c17dc73e upstream.

This is intended to add ZTE device PIDs on kernel.

Signed-off-by: Liu.Zhao <lzsos369@163.com>
[johan: sort the new entries ]
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agodm btree: add ref counting ops for the leaves of top level btrees
Joe Thornber [Wed, 12 Aug 2015 14:12:09 +0000]
dm btree: add ref counting ops for the leaves of top level btrees

commit b0dc3c8bc157c60b1d470163882be8c13e1950af upstream.

When using nested btrees, the top leaves of the top levels contain
block addresses for the root of the next tree down.  If we shadow a
shared leaf node the leaf values (sub tree roots) should be incremented

This is only an issue if there is metadata sharing in the top levels.
Which only occurs if metadata snapshots are being used (as is possible
with dm-thinp).  And could result in a block from the thinp metadata
snap being reused early, thus corrupting the thinp metadata snap.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agostaging: comedi: adl_pci7x3x: fix digital output on PCI-7230
Ian Abbott [Tue, 11 Aug 2015 12:05:10 +0000]
staging: comedi: adl_pci7x3x: fix digital output on PCI-7230

commit ad83dbd974feb2e2a8cc071a1d28782bd4d2c70e upstream.

The "adl_pci7x3x" driver replaced the "adl_pci7230" and "adl_pci7432"
drivers in commits 8f567c373c4b ("staging: comedi: new adl_pci7x3x
driver") and 657f77d173d3 ("staging: comedi: remove adl_pci7230 and
adl_pci7432 drivers").  Although the new driver code agrees with the
user manuals for the respective boards, digital outputs stopped working
on the PCI-7230.  This has 16 digital output channels and the previous
adl_pci7230 driver shifted the 16 bit output state left by 16 bits
before writing to the hardware register.  The new adl_pci7x3x driver
doesn't do that.  Fix it in `adl_pci7x3x_do_insn_bits()` by checking
for the special case of the subdevice having only 16 channels and
duplicating the 16 bit output state into both halves of the 32-bit
register.  That should work both for what the board actually does and
for what the user manual says it should do.

Fixes: 8f567c373c4b ("staging: comedi: new adl_pci7x3x driver")
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agobtrfs: skip waiting on ordered range for special files
Jeff Mahoney [Sat, 12 Sep 2015 01:44:17 +0000]
btrfs: skip waiting on ordered range for special files

commit a30e577c96f59b1e1678ea5462432b09bf7d5cbc upstream.

In btrfs_evict_inode, we properly truncate the page cache for evicted
inodes but then we call btrfs_wait_ordered_range for every inode as well.
It's the right thing to do for regular files but results in incorrect
behavior for device inodes for block devices.

filemap_fdatawrite_range gets called with inode->i_mapping which gets
resolved to the block device inode before getting passed to
wbc_attach_fdatawrite_inode and ultimately to inode_to_bdi.  What happens
next depends on whether there's an open file handle associated with the
inode.  If there is, we write to the block device, which is unexpected
behavior.  If there isn't, we through normally and inode->i_data is used.
We can also end up racing against open/close which can result in crashes
when i_mapping points to a block device inode that has been closed.

Since there can't be any page cache associated with special file inodes,
it's safe to skip the btrfs_wait_ordered_range call entirely and avoid
the problem.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=100911
Tested-by: Christoph Biedl <linux-kernel.bfrz@manchmal.in-ulm.de>
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoASoC: dwc: correct irq clear method
Yitian Bu [Fri, 2 Oct 2015 07:18:41 +0000]
ASoC: dwc: correct irq clear method

commit 4873867e5f2bd90faad861dd94865099fc3140f3 upstream.

from Designware I2S datasheet, tx/rx XRUN irq is cleared by
reading register TOR/ROR, rather than by writing into them.

Signed-off-by: Yitian Bu <yitian.bu@tangramtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoASoC: fix broken pxa SoC support
Robert Jarzmik [Tue, 15 Sep 2015 18:51:31 +0000]
ASoC: fix broken pxa SoC support

commit 3c8f7710c1c44fb650bc29b6ef78ed8b60cfaa28 upstream.

The previous fix of pxa library support, which was introduced to fix the
library dependency, broke the previous SoC behavior, where a machine
code binding pxa2xx-ac97 with a coded relied on :
 - sound/soc/pxa/pxa2xx-ac97.c
 - sound/soc/codecs/XXX.c

For example, the mioa701_wm9713.c machine code is currently broken. The
"select ARM" statement wrongly selects the soc/arm/pxa2xx-ac97 for
compilation, as per an unfortunate fate SND_PXA2XX_AC97 is both declared
in sound/arm/Kconfig and sound/soc/pxa/Kconfig.

Fix this by ensuring that SND_PXA2XX_SOC correctly triggers the correct
pxa2xx-ac97 compilation.

Fixes: 846172dfe33c ("ASoC: fix SND_PXA2XX_LIB Kconfig warning")
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agoALSA: synth: Fix conflicting OSS device registration on AWE32
Takashi Iwai [Mon, 5 Oct 2015 14:55:09 +0000]
ALSA: synth: Fix conflicting OSS device registration on AWE32

commit 225db5762dc1a35b26850477ffa06e5cd0097243 upstream.

When OSS emulation is loaded on ISA SB AWE32 chip, we get now kernel
warnings like:
  WARNING: CPU: 0 PID: 2791 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x51/0x80()
  sysfs: cannot create duplicate filename '/devices/isa/sbawe.0/sound/card0/seq-oss-0-0'

It's because both emux synth and opl3 drivers try to register their
OSS device object with the same static index number 0.  This hasn't
been a big problem until the recent rewrite of device management code
(that exposes sysfs at the same time), but it's been an obvious bug.

This patch works around it just by using a different index number of
emux synth object.  There can be a more elegant way to fix, but it's
enough for now, as this code won't be touched so often, in anyway.

Reported-and-tested-by: Michael Shell <list1@michaelshell.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agomm: hugetlbfs: skip shared VMAs when unmapping private pages to satisfy a fault
Mel Gorman [Thu, 1 Oct 2015 22:36:57 +0000]
mm: hugetlbfs: skip shared VMAs when unmapping private pages to satisfy a fault

commit 2f84a8990ebbe235c59716896e017c6b2ca1200f upstream.

SunDong reported the following on


I think I find a linux bug, I have the test cases is constructed. I
can stable recurring problems in fedora22(4.0.4) kernel version,
arch for x86_64.  I construct transparent huge page, when the parent
and child process with MAP_SHARE, MAP_PRIVATE way to access the same
huge page area, it has the opportunity to lead to huge page copy on
write failure, and then it will munmap the child corresponding mmap
area, but then the child mmap area with VM_MAYSHARE attributes, child
process munmap this area can trigger VM_BUG_ON in set_vma_resv_flags
functions (vma - > vm_flags & VM_MAYSHARE).

There were a number of problems with the report (e.g.  it's hugetlbfs that
triggers this, not transparent huge pages) but it was fundamentally
correct in that a VM_BUG_ON in set_vma_resv_flags() can be triggered that
looks like this

 vma ffff8804651fd0d0 start 00007fc474e00000 end 00007fc475e00000
 next ffff8804651fd018 prev ffff8804651fd188 mm ffff88046b1b1800
 prot 8000000000000027 anon_vma           (null) vm_ops ffffffff8182a7a0
 pgoff 0 file ffff88106bdb9800 private_data           (null)
 flags: 0x84400fb(read|write|shared|mayread|maywrite|mayexec|mayshare|dontexpand|hugetlb)
 kernel BUG at mm/hugetlb.c:462!
 Modules linked in: xt_pkttype xt_LOG xt_limit [..]
 CPU: 38 PID: 26839 Comm: map Not tainted 4.0.4-default #1
 Hardware name: Dell Inc. PowerEdge R810/0TT6JF, BIOS 2.7.4 04/26/2012

The VM_BUG_ON is correct because private and shared mappings have
different reservation accounting but the warning clearly shows that the
VMA is shared.

When a private COW fails to allocate a new page then only the process
that created the VMA gets the page -- all the children unmap the page.
If the children access that data in the future then they get killed.

The problem is that the same file is mapped shared and private.  During
the COW, the allocation fails, the VMAs are traversed to unmap the other
private pages but a shared VMA is found and the bug is triggered.  This
patch identifies such VMAs and skips them.

Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reported-by: SunDong <sund_sky@126.com>
Reviewed-by: Michal Hocko <mhocko@suse.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: David Rientjes <rientjes@google.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agospi: spi-pxa2xx: Check status register to determine if SSSR_TINT is disabled
Tan, Jui Nee [Tue, 1 Sep 2015 02:22:51 +0000]
spi: spi-pxa2xx: Check status register to determine if SSSR_TINT is disabled

commit 02bc933ebb59208f42c2e6305b2c17fd306f695d upstream.

On Intel Baytrail, there is case when interrupt handler get called, no SPI
message is captured. The RX FIFO is indeed empty when RX timeout pending
interrupt (SSSR_TINT) happens.

Use the BIOS version where both HSUART and SPI are on the same IRQ. Both
drivers are using IRQF_SHARED when calling the request_irq function. When
running two separate and independent SPI and HSUART application that
generate data traffic on both components, user will see messages like
below on the console:

  pxa2xx-spi pxa2xx-spi.0: bad message state in interrupt handler

This commit will fix this by first checking Receiver Time-out Interrupt,
if it is disabled, ignore the request and return without servicing.

Signed-off-by: Tan, Jui Nee <jui.nee.tan@intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 years agospi: Fix documentation of spi_alloc_master()
Guenter Roeck [Sat, 5 Sep 2015 22:46:54 +0000]
spi: Fix documentation of spi_alloc_master()

commit a394d635193b641f2c86ead5ada5b115d57c51f8 upstream.

Actually, spi_master_put() after spi_alloc_master() must _not_ be followed
by kfree(). The memory is already freed with the call to spi_master_put()
through spi_master_class, which registers a release function. Calling both
spi_master_put() and kfree() results in often nasty (and delayed) crashes
elsewhere in the kernel, often in the networking stack.

This reverts commit eb4af0f5349235df2e4a5057a72fc8962d00308a.

Link to patch and concerns: https://lkml.org/lkml/2012/9/3/269

Alexey Klimov: This revert becomes valid after
94c69f765f1b4a658d96905ec59928e3e3e07e6a when spi-imx.c
has been fixed and there is no need to call kfree() so comment
for spi_alloc_master() should be fixed.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>